A 3D fully coupled analysis of nonlinear sloshing and ship motion

This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion.     

Complete two-dimensional analysis of sea-wave-induced fully non-linear sloshing fluid in a rigid floating tank

A time-independent finite-difference method and a fifth-order Runge–Kutta–Felhberg scheme were used to analyze the dynamic responses of sea-wave-induced fully non-linear sloshing fluid in a floating tank. The interaction effect between the fully non-linear sloshing fluid and the floating tank associated with coupled surge, heave and pitch motions of the tank are analyzed for the first time in the present pilot study. For the analysis of fluid motion in the tank, the coordinate system is moving (translating and rotating) with tank motion. The time-dependent water surface of the sloshing fluid is transformed to a horizontal plane and the flow field is mapped on to a rectangular region. The Euler equations as well as the fully non-linear kinematic free surface condition were used in the analysis of the sloshing fluid. The strip theory for linearized harmonic sea-wave loading was adopted to evaluate the regular encounter wave force. In addition, the dynamic coefficients used in the dynamic equations of tank motion were also derived based on strip theory and a harmonic motion of the tank. The characteristics of free and forced tank motions with and without the sloshing effect are studied. By the damping effect, the response of free oscillation will damp out and that of forced oscillation will approach a steady state. Without sea-wave action, the contribution of the sloshing load would enlarge the angular response of tank motion as well as the rise of free surface and the sloshing effect will delay the damping effect on angular displacement. On the contrary, under sea-wave action, the sloshing effect will decrease the dynamic response of tank motion and rise of free surface. The interaction, sloshing and coupling effects are found to be significant and should be considered in the analysis and design of floating tanks.     

Sloshing waves and resonance modes of fluid in a 3D tank by a time-independent finite difference method

A 3D time-independent finite difference method is developed to solve for wave sloshing in a three-dimensional tank excited by coupled surge and sway motions. The 3D equations of fluid motion are derived in a moving coordinate system. The three-dimensional tank, with an arbitrary depth and a square base, is subjected to a range of excitation frequencies with motions that exhibit multiple degrees of freedom. For demonstration purposes the numerical scheme is validated by a benchmark study. Five types of sloshing waves were observed when the tank is excited by various excitation frequencies. A spectral analysis identified the resonant frequencies of each type of wave and the results show a strong correlation between resonant modes and the occurrence of the sloshing wave types. The method can be used to simulate fluid sloshing in a 3D tank with six-degrees of freedom.     

A comparative study of numerical simulations for fluid–structure interaction of liquid-filled tank during ship collision

Although International Maritime Organization (IMO) has taken many measures to minimize ship collisions, ships carrying liquid cargo sometimes do get struck by other vessels. The outflow of crude oil causes very serious consequences to the environment. In such cases it is necessary to analyze the response of structure of struck liquid cargo-filled tank to account for fluid–structure interaction accurately. In this paper, numerical simulation of collision between a container ship with double hull very large crude carrier (VLCC) is presented. Three different numerical simulation mothods were adopted to model fluid–structure interaction in liquid-filled cargo tank, namely arbitrary Lagrangian–Eulerian finite element method, Lagrangian finite element method and linear sloshing model. The numerical simulation results reveal that the fluid–structure interaction of liquid cargo-filled tank has a significant effect on the motion and structural response of the struck cargo tank. Compared with the calculation results of ALE FE method, the linear sloshing model underestimates the influence of fluid–structure interaction of liquid cargo tank while the Lagrangian–Eulerian finite element method may be considered as the practical method for engineering applications as it provided more reasonable results with a relatively low central processing unit (CPU) time.     

The effects of LNG-tank sloshing on the global motions of LNG carriers

The coupling and interactions between ship motion and inner-tank sloshing are investigated by a time-domain simulation scheme. For the time-domain simulation, the hydrodynamic coefficients and wave forces are obtained by a potential-thoery-based three-dimensional (3D) diffraction/radiation panel program in frequency domain. Then, the corresponding simulations of motions in time domain are carried out using convolution integral. The liquid sloshing in a tank is simulated in time domain by a Navier–Stokes solver. A finite difference method with SURF scheme is applied for the direct simulation of liquid sloshing. The computed sloshing force and moment are then applied as external excitations to the ship motion. The calculated ship motion is in turn inputted as the excitation for liquid sloshing, which is repeated for the ensuing time steps. For comparison, we independently developed a coupling scheme in the frequency domain using a sloshing code based on the linear potential theory. The hydrodynamic coefficients of the inner tanks are also obtained by a 3D panel program. The developed schemes are applied to a barge-type FPSO hull equipped with two partially filled tanks. The time-domain simulation results show similar trend when compared with MARIN's experimental results. The most pronounced coupling effects are the shift or split of peak-motion frequencies. It is also found that the pattern of coupling effects between vessel motion and liquid sloshing appreciably changes with filling level. The independent frequency-domain coupled analysis also shows the observed phenomena.     

浮基多体系统自激运动响应的时域分析方法

浮基多体系统上部机构作业时不仅存在多体系统内部各物体间的耦合作用 ,还存在浮基与流场间的耦合作用。本文将浮基在流场中引起的辐射势表示为浮基加速度与时域规范化速度势乘积的卷积形式 ,导出流体动压力及静水系泊恢复力与浮基运动的关系。使用多刚体力学的凯恩方法得到系统的动力学方程。最后给出了在时域中数值求解系统运动响应的具体步骤     

A nonlinear model of parametric rolling stabilization by anti-roll tanks

The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas.     

PSME model of parametric excitation of two-layer liquid in a tank

Internal waves driven by external excitation constitute important phenomena that are often encountered in environmental fluid mechanics. In this study, a pseudospectral σ-transformation model is used to simulate parametric excitation of stratified liquid in a two-layer rectangular tank. The σ-transformation maps the physical domain including the liquid free surface, the interface between the liquid layers, and the bed, onto a pair of fixed rectangular computational domains corresponding to the two layers. The governing equation and boundary conditions are discretised using Chebyshev collocation formulae. The numerical model is verified for two analytical sloshing problems: horizontal excitation of constant density liquid in a rectangular tank, and vertical excitation of stratified liquid in a rectangular tank. A detailed analysis is provided of liquid motions in a shallow water tank due to excitations in the horizontal and the vertical directions. Also, the effect of pycnocline on the wave motions and patterns is studied. It is found that wave regimes and patterns are considerably influenced by the pycnocline, especially when the excitation frequency is large. The present study demonstrates that a pseudospectral σ-transformation is capable to model non-linear sloshing waves in a two-layer rectangular tank.     

Coupled analysis of nonlinear sloshing and ship motions

A coupled numerical model considering nonlinear sloshing flows and the linear ship motions has been developed based on a boundary element method. Hydrodynamic performances of a tank containing internal fluid under regular wave excitations in sway are investigated by the present time-domain simulation model and comparative model tests. The numerical model features well the hydrodynamic performance of a tank and its internal sloshing flows obtained from the experiments. In particular, the numerical simulations of the strong nonlinear sloshing flows at the natural frequency have been validated. The influence of the excitation wave height and wave frequency on ship motions and internal sloshing has been investigated. The magnitude of the internal sloshing increases nonlinearly as the wave excitation increases. It is observed that the asymmetry of the internal sloshing relative to still water surface becomes more pronounced at higher wave excitation. The internal sloshing-induced wave elevation is found to be amplitude-modulated. The frequency of the amplitude modulation envelope is determined by the difference between the incident wave frequency and the natural frequency of the internal sloshing. Furthermore, the coupling mechanism between ship motions and internal sloshing is discussed.     

A Novel Dynamics Analysis Method for Spar-Type Floating Offshore Wind Turbine

The dynamic behavior of floating offshore wind turbine (FOWT) is crucial for its design and optimization. A novel dynamics analysis method for the spar-type FOWT system is proposed in this paper based on the theorem of moment of momentum and the Newton’s second law. The full nonlinearity of the equations of motion (EOMs) and the full nonlinear coupling between external loads and the motions are preserved in this method. Compared with the conventional methods, this method is more transparent and it can be applied directly to the large-amplitude rotation cases. An in-house code is developed to implement this method. The capability of in-house code is verified by comparing its simulation results with those predicted by FAST. Based on the in-house code, the dynamic responses of a spar-type FOWT system are investigated under various conditions.     

Roll stabilization by anti-roll passive tanks

Since the most severe roll motion occurs at resonance (known as synchronous rolling), the best way of reducing it is to increase the damping. The most common means of doing so is by the installation of bilge keels. If more control is required, both anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. The use of tanks with liquid free surfaces for reducing roll motion of ships is an old idea. Many researchers have studied the design of anti-roll tanks. However, most of the past effort has concentrated on studying the performance of anti-roll tanks in damping the roll motion of the ship. Little attention has been paid to the fluid motion inside the tank itself. Another important issue is the tank tuning. Proper tuning of the anti-roll tank, to match the ship's natural frequency, is very important in reducing the roll motion. This paper concentrates on the most familiar type, which is the U-tube passive tank as a mechanical absorber of roll motion. A detailed study, covering tank damping, mass, location relative to the ship CG, and tuning, is presented. New suggestions and observations are stated concerning tank damping and tuning.     

Motion responses of barge carrying liquid tank

The interaction between the liquid sloshing in a rectangular tank equipped inside the barge and the barge responses has been investigated through a comprehensive experimental program. The barge was subjected to both regular and random wave excitations under beam sea condition. Three relative fill levels (h_s/l) with liquid fill depth (h_s) to length of tank (l) ratio of 0.163, 0.325 and 0.488 were considered. In addition, the barge responses of equivalent dry weight condition corresponding to each fill level were measured to understand the influence of sloshing. While the excitation wave frequency equals to first mode natural sloshing frequency, a noticeable decrease in the sway response has been observed. However, the effect of sloshing oscillation on the heave response is insignificant. A split up of roll resonance was observed for the aspect ratio of 0.163 due to the coupling effect of roll motion and sloshing.     

A hybrid time/frequency domain approach for efficient coupled analysis of vessel/mooring/riser dynamics

The dynamic analysis of a deepwater floating structure is complex due to dynamic coupling between the platform and the moorings/risers. Furthermore, the system response at the incident wave frequency and at the resonant low frequency is coupled due to geometric and hydrodynamic nonlinearities. As such, it is generally held that a fully coupled time-domain analysis should be used for an accurate prediction of the dynamic response. However, in a recent work, it is found that for an ultra-deepwater floating system, a fully coupled frequency-domain analysis can provide highly accurate response predictions. One reason is the accuracy of the drag linearization procedure over the motions at two time scales, another is the minimal geometric nonlinearity of the moorings/risers in deepwater. In this paper, the frequency-domain approach is investigated for intermediate water depths, and it is found that the accuracy reduces substantially as geometric nonlinearity becomes important. Therefore, a novel hybrid approach is developed, in which the low-frequency motion is simulated in the time domain while the wave frequency motion is solved in the frequency domain at regular intervals. Coupling between the two analyses is effected by the fact that (i) the low-frequency motion affects the line geometry for the wave frequency motion, and (ii) the wave frequency motion affects the modeling of the drag forces, which damp the low-frequency motion. The method is found to be nearly as accurate as fully coupled time domain analysis even for a system with a preponderance of nonlinear and coupling effects, but requiring only one-tenth of the computational effort.     

Free fall water entry of a wedge tank into calm water in three degrees of freedom

The hydrodynamic problem of a two dimensional wedge tank filled with liquid entering a calm water surface is analysed based on the incompressible velocity potential theory. The motion effect of inner liquid on the entry process is investigated through comparison with the result containing equivalent solid mass or the liquid being frozen. The problem is solved through the boundary element method in the time domain. Two separated computational regions are constructed. One is the inner domain for the internal liquid, and the other is the outer open domain for the open water. The former is solved in the physical coordinate system, and the latter is solved in a stretched coordinate system. The solutions of two separated domains are connected through the motion of the body. The auxiliary function method is extended to decouple the nonlinear mutual dependence between fluid loads from two separated domains and the body motion. Detailed results for wedge motion, external impact pressure and free surface, and for internal pressure, free surface deformation and liquid motion are provided. Through comparison with the results of a wedge tank with frozen ice, in-depth discussion on the effect of the inner liquid is provided.     

Design of passive anti-roll tanks for roll stabilization in the nonlinear range

The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6.     

Dynamic Positioning Control of Surge-Pitch Coupled Motion for SmallWaterplane-Area Marine Structures

For general dynamic positioning systems, controllers are mainly based on the feedback of motions only in the horizontal plane. However, for marine structures with a small water plane area and low metacentric height,undesirable surge and pitch oscillations may be induced by the thruster actions. In this paper, three control laws are investigated to suppress the induced pitch motion by adding pitch rate, pitch angle or pitch acceleration into the feedback control loop. Extensive numerical simulations are conducted with a semi-submersible platform for each control law. The influences of additional terms on surge-pitch coupled motions are analyzed in both frequency and time domain. The mechanical constraints of the thrust allocation and the frequency characters of external forces are simultaneously considered. It is concluded that adding pitch angle or pitch acceleration into the feedback loop changes the natural frequency in pitch, and its performance is highly dependent on the frequency distribution of external forces, while adding pitch rate into the feedback loop is always effective in mitigating surge-pitch coupled motions.     

Nonplanar multi-modal vibrations of fluid-conveying risers under shear cross flows

Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow.     

Hydroelastic analysis of floating structures with liquid tanks and comparison with experimental tests

In this study, we develop a numerical method for a 3D linear hydroelastic analysis of floating structures with liquid tanks subjected to surface regular water waves and compare the numerical results with experimental tests. Considering direct couplings among structural motion, sloshing, and water waves, a mathematical formulation and a numerical method extended from a recent work [1] are developed. The finite element method is employed for the floating structure and internal fluid in tanks, and the boundary element method is used for the external fluid. The resulting formulation completely incorporates all the interaction terms including hydrostatic stiffness and the irregular frequency effect is removed by introducing the extended boundary integral equations. Through various numerical tests, we verify the proposed numerical method. We also performed 3D hydroelastic experimental tests of a floating production unit (FPU) model in an ocean basin. The measured dynamic motions are compared with the numerical results obtained using the proposed method.     

水下输液管道动力特性研究

该文研究水下横向输液管道的动力特性 ,假定管道系统承受外界均匀流的作用 ,同时考虑管内流体流动的影响 ,建立了水下输液管道侧向振动的微分方程。采用 Hermite插值函数和Galerkin法离散得到其有限元标准形式。研究管内流动为恒定流时输液管道长度、内部流体流动速度对管道动力特性的影响及管内流动含有谐波挠动的情况下输液管道固有频率的变化。结果表明 ,在管内恒定流动的情况下 ,输液的自振频率随管道长度及管内流速的增加而降低 ,同时管内流动的谐波挠动对管道的自振频率也有影响。     

Time and frequency domain coupled analysis of deepwater floating production systems

The dynamic analysis of a deepwater floating structure is complicated by the fact that there can be significant coupling between the dynamics of the floating vessel and the attached risers and mooring lines. Furthermore, there are significant nonlinear effects, such as geometric nonlinearities, drag forces, and second order (slow drift) forces on the vessel, and for this reason the governing equations of motion are normally solved in the time domain. This approach is computationally intensive, and the aim of the present work is to develop and validate a more efficient linearized frequency domain approach. To this end, both time and frequency domain models of a coupled vessel/riser/mooring system are developed, which each incorporate both first and second order motions. It is shown that the frequency domain approach yields very good predictions of the system response when benchmarked against the time domain analysis, and the reasons for this are discussed. It is found that the linearization scheme employed for the drag forces on the risers and mooring lines yields a very good estimate of the resulting contribution to slow drift damping.