Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

Soil Cd,Cu, Pb and Zn contaminants around Mount Isa city,Queensland, Australia: Potential sources and risks to human health

This article investigates the relationship between soil Cd, Cu, Pb and Zn contaminants and the location and activities of the Pb–Zn–Ag and Cu mines at Mount Isa, Queensland, Australia. Analysis of the data focuses primarily on soil Pb distributions and concentrations because of their potential impact on children’s health. The Xstrata Mount Isa Mines lease (XMIM) is Australia’s leading emitter of numerous contaminants to the environment, including Cu and Pb, and the mining-related activities have been linked causally to the findings of a 2008 study that showed 11.3% of local children (12–60 months) have blood Pb levels >10 μg/dL. Queensland government authorities and Xstrata Mount Isa Mines Pty Ltd maintain that contaminants within environmental systems around Mount Isa are largely the result of near-surface mineralization. The evidence for whether the contamination is derived from XMIM or other possible sources, such as the natural weathering of ore-rich bedrock, is investigated using data from surface and subsurface soil chemistry, atmospheric modelling of metal contaminants from mining and smelting operations and local geological and associated geochemical studies. Sixty surface soil samples collected from sites adjacent to houses, parks and schools throughout Mount Isa city were analyzed for their total extractable Cd, Cu, Pb and Zn concentrations in the <2 mm to >180 μm (coarser) and <180 μm (finer) grain size fractions. Concentrations in the finer size fraction reveal a range of values: Cd – 0.7–12.5 ppm; Cu – 31–12,100 ppm; Pb – 8–5770 ppm; Zn – 26–11,100 ppm, with several samples exceeding Australian residential health investigation guidelines. Spatial analysis shows that surface soil metal concentrations are significantly higher within 2 km of XMIM compared to more distant samples, and that more than 1000 property lots are at risk of having detrimentally high soil Pb levels. Determination of metal concentrations in 49 samples from eight soil pits shows that surface samples (0–2 cm) are enriched significantly relative to those at depth (10–20 cm), suggesting an atmospheric depositional origin. AUSPLUME air dispersal modelling of Pb originating from the Cu and Pb smelter stacks and mine site fugitive sources confirms that Pb is deposited across the urban area, during periods of the year (∼20%/a) when the wind blows from the direction of XMIM towards the urban area and disperses dusts from the uncovered spoil and road surfaces, as well as from stack emission sources. Although there are some spatially restricted outcrops of Pb close to the surface in parts of the urban area, the Cu-ore body is ∼244 m below the surface. However, enriched and significantly correlated surface soil concentrations of Cu and Pb (Pearson correlation 0.879, p = 0.000) in and around the urban area of Mount Isa can only be explained by atmospheric transport and deposition of metals from the adjoining mining and smelting operations. The results from this study provide unequivocal evidence that both historic and ongoing emissions from XMIM are contaminating the urban environment. Given the ongoing Pb poisoning issues in Mount Isa children, it is clear that remediation, reductions in mine emissions and more stringent regulatory actions are warranted.     

Enrichment of metals in soils subjected to different land uses in a typical Mediterranean environment (Murcia City, southeast Spain)

Industrialization, urbanization, and agricultural practices are 3 of the most important sources of metal accumulations in soils. Concentrations of Cr, Mn, Ni, Cu, Pb, Zn and Cd were determined in surface soils collected under different land uses, including urban (UR), industrial (IN-1 and IN-2), agricultural (AG), abandoned unused (AB), and natural (NA) sites to examine the influence of anthropogenic activities on metals in soils formed in a typical Mediterranean environment. The highest concentrations of Cr, Cd, and Pb observed in the NW industrial area (IN-2) were 63.7, 3.34 and 2330 mg metal kg⁻¹ soil, for each metal, respectively. The SW industrial area (IN-1) contained the highest Zn content at 135 mg kg⁻¹. However, soils with the highest concentrations of Ni and Cu were located in AG sites at 30.9 and 64.9 mg kg⁻¹ soil, respectively. Sampling locations with the highest concentrations of Mn were identified in AB sites. Using the concentrations of metals at the NA sites as the baseline levels, soils collected from all other land uses in the study area exhibited significantly higher total contents of Zn, Mn, Cr and Ni. Metal enrichment was attributed to fertilizer and pesticide applications, industrial activities, and metal deposition from a high volume of vehicular traffic (for Pb and Cd). High concentrations of Mn in some samples were attributed to parent materials. The study demonstrated that anthropogenic activities associated with various land uses contribute to metal accumulation in soils and indicated a need to closely monitor land management practices to reduce human and ecological risks from environmental pollution.     

Assessment of heavy metals contamination in urban topsoil from Changchun City,China

Due to the rapid urbanization and industrialization that has occurred in China over the last few decades, metals have been continuously emitted into the urban environment and now pose a serious threat to human health. Indeed, there is a growing concern over the potential for pollution of urban soils with heavy metals. Therefore, an extensive soil survey was conducted in urban areas of Changchun, China, to evaluate the current status of heavy metal contamination in soils and to evaluate its potential sources. A total of 352 samples of urban soils were collected from urban areas of Changchun using a systematic sampling strategy in which one sample per km² was taken (0 ~ 20 cm). The levels of Cu, Pb, Zn and the major elements (Mn, Al₂O₃, CaO, Fe₂O₃, MgO, SiO₂, K₂O and NaO) were then determined by X-Ray fluorescence spectrometry (XRF), while the level of Cd was determined by graphite furnace atomic absorption spectrometry (GF-AAS), and the Hg and As concentrations were determined by atomic fluorescence spectroscopy (AFS). The results indicated that, when compared with the background values of topsoil in the Changchun region, the topsoil in urban areas were enriched with metals, particularly Cu, Cd, Zn, Pb and Hg. The results of correlation coefficient analysis showed that Hg, As, Cd, Cu, Pb and Zn were significantly positive correlated with each other, while Cr and Mn formed another group. Moreover, significantly positive correlations were observed between pH and Zn, Pb, Cu, Cd, As and Hg, indicating that pH influences the distributions of these metals in urban soils in Changchun. Principal component analysis (PCA) was conducted to identify sources of heavy metals and the results revealed distinctly different associations among the trace metals and the major elements in the urban soils. The concentration of Cr appeared to be controlled by the parent material (natural sources), while Cu, Pb and Zn were mainly from vehicle emissions, with Zn primarily coming from vehicle tires. Additionally, Hg and As primarily originated from coal combustion, while Cd was mainly associated with industrial sources. According to the pollution index (PI) of each metal, the overall levels of metal pollution were not especially high, but there were clearly contaminated sites concentrated in the central and northeast portion of the studied region. The Nemerow integrated pollution index (NIPI) of the seven metals also indicated that urban soils in Changchun city were classified as having low level of pollution.     

Contamination and potential mobility assessment of heavy metals in urban soils of Hangzhou,China: relationship with different land uses

Concentration and distribution of heavy metals (Cd, Cu, Pb and Zn) in urban soils of Hangzhou, China, were measured based on different land uses. The contamination degree of heavy metals was assessed on the basis of pollution index (PI), integrated pollution index (IPI) and geoaccumulation index (I _geo). The 0.1 mol l⁻¹ HCl extraction procedure and gastric juice simulation test (GJST) were used to evaluate the potential mobility and environmental risk of heavy metals in urban soils. The average concentration of Cd, Cu, Pb and Zn in urban soils was measured at 1.2 (with a range of 0.7–4.6), 52.0 (7.4–177.3), 88.2 (15.0–492.1) and 206.9 (19.3–1,249.2) mg kg⁻¹, respectively. The degree of contamination increased in the order of industrial area (IA) > roadside (RS) > residential and commercial areas (RC) > public park and green areas (PG). The PIs for heavy metals indicated that there is a considerable Cd, Cu, Pb and Zn pollution, which originate from traffic and industrial activities. The IPI of these four metals ranged from 1.6 to 11.8 with a mean of 3.5, with the highest IPI in the industrial area. The assessment results of I _geo also supported that urban soil were moderately contaminated with Cd and to a lesser extent also with Cu, Pb and Zn. The IP and I _geo values reveal the pollution degree of heavy metal was the order of Cd > Pb > Zn ≈ Cu. It was shown that mobility and bioavailability of the heavy metals in urban soils increased in the order of Cd > Cu > Zn ≈ Pb. Owing to high mobility of Cd and Cu in the urban soils, further investigations are needed to understand their effect on the urban environment and human health. It is concluded that industrial activities and emissions from vehicles may be the major source of heavy metals in urban contamination. Results of this study present a rough guide about the distribution and potential environmental and health risk of heavy metals in the urban soils.     

The cycling of Ni,Zn, Cu in the system “mine tailings–ground water–plants”: A case study

The comparative behaviour of Ni, Cu and Zn in the system “mine tailings–ground water–plants” has been investigated at the Ni–Cu mine site operated by INCO Ltd. Thompson Operations, Thompson, Manitoba. Oxidation of sulphide minerals causes the release of metals from exposed tailings containing Ni ∼2000 ppm, Cu ∼150 ppm and Zn ∼100 ppm to the ground water, which contains 350 mg/L Ni, 0.007 mg/L Cu, and 1.6 mg/L Zn. The metal concentration in the ground water is affected by the relative proportions of sulfide minerals, the rate of oxidation of sulphide minerals (Ni-bearing pyrrhotite > sphalerite > chalcopyrite), and the affinity of the metals for secondary Fe-phases (Ni > Zn > Cu).     

Uptake of metals by plants in urban areas

In the present study, bulk contents of Ni, Zn, Cu, Pb and Mn in urban area of Tehran city are determined. Subsequently, the chemical bonds of metals with various soil fractions are brought out. Chemical partitioning studies revealed that various percentile of Ni, Zn, Cu, Pb and Mn is found in anthropogenic portion of soils. Zinc, Ni, Cu, Pb and Mn fall within “low pollution” class in accordance with index of pollution (I _POLL). The trend of anthropogenic share of studied metals in soils of Tehran is Zn (55 %) > Cu (31 %) > Ni and Pb (30 %) > Mn (12 %). The overall potential of studied plants in metal removal from soil is Salvia > Viola > Portulaca. It should be pointed out that roots have higher potential in metal removal from soil when compared with leaf and stem. Lithogenic portion of metals remains intact before and after pot analysis. Thus, phytoremediation is highly dependent on the chemical bonds of metals. Present study showed that metal contents of loosely bonded ions, sulfide bonds and organometallic bonds are reduced after 90 days of plant cultivation. The overall removal trend of studied metals is Zn (16 %) > Cu (14 %) > Ni (11 %) > Pb (7 %) > Mn (6 %). The obtained results show that the anthropogenic portion of metals is reduced after the phytoremediation practice. For instance, the initial anthropogenic portion of Zn (55 %) is changed to 39 % showing an overall reduction of about 16 %. The anthropogenic portions of Cu, Ni, Pb and Mn are also reduced by 14, 11, 7 and 6 %, respectively.     

Comparison of extractability of Cd, Cu, Pb and Zn with sequential extraction in contaminated and non-contaminated soils

Various extraction procedures were employed for measuring extractable concentrations of potential toxic elements in soil. The extractability of Cd, Cu, Pb and Zn in four contaminated and four non-contaminated soils of Japan, was compared by single extraction (CaCl₂, DTPA, NH₄Cl, 0.1 M HCl and 1 M HCl ) and sequential extraction procedures [(six operationally defined chemical phases, viz. water soluble (Fl), exchangeable (F2), carbonate (F3), oxide (F4), organic (F5) and residual (F6) fractions)]. Extractability of metals from soils samples varied depending on metals and/or extradants used. Among the extradants, 1 M HCl extracted the largest proportion of Cd (79 to 96% of total), Cu (61 to 83%), Pb (51 to 99%) and Zn (23 to 52%) from soils followed by 0.1 M HCl, NH₄Cl, DTPA and CaCl₂. In all the extradants, the proportion of extractability of metals was higher in the contaminated soils than the non-contaminated soils. Regardless of soils and extradants, relative extractability was higher for Cd as compared to other three metals. The use of 1 M HCl may be recommended for first-level screening of soil contamination with heavy metals. The other four weak extradants are believed to provide a better assessment of bioavailable/mobile metals content in soils than 1 M HCl extradant. However, 0.1 M HCl mobilized all four metals irrespective of soil types, therefore, might be the best choice if only one extradant is to be used. The sequential extraction procedures showed 22 to 64% of total Cd was in the mobile fraction (sum of Fl to F3), while the corresponding values for Cu, Pb and Zn in this fractions were 2 to 23% suggesting higher mobility of Cd than other three metals. The single extraction procedures are simple and easy to perform and obtained results are comparable with sequential extraction procedure.     

海南土壤中Zn、Pb、Cu、Cd四种重金属含量及其生物有效性的研究

对海南0个土壤样品中的nl、Pb、Cu、0四种重金属的总量和生物有效态含量以及45个植物样(根、茎、叶)中的重金属含量分别进行了测定，采样点基本上覆盖了海南全省，测定结果表明，土壤中nl总量低于全国平均值，而Pb、Cu、Cd高于全国平均值，土壤中重金属生物有效态含量一般低于其总量的10％，其中Pb最高为7．71％，而Cu仅为1．13％，具有较大的变异性；植物中重金属含量与土壤中重金属总量呈现负相关性，但与土壤中有效态重金属含量一般呈现正相关性，叶中的重金属含量与土壤中有效态重金属含量之间的相关性更为显着，叶中的重金属含量与土壤中有效态重金属含量之间的相关系数分别为：Zn(0．726)，Cu(0．626)，Pb(0．n4)，Cd(0．512)。这说明土壤中重金属总量并不能全面的评价土壤的环境效应和重金属的生物有效性，应该把重金属总量和生物有效态含量结合起来加以研究，并应将土壤中重金属的含量与植物中该元素含量之间作相关分析，根据其相关系数的大小来判断其生物有效性的程度。     

Speciation and solubility of heavy metals in contaminated soil using X-ray microfluorescence, EXAFS spectroscopy, chemical extraction, and thermodynamic modeling

Synchrotron-based X-ray radiation microfluorescence (μ-SXRF) and micro-focused and powder extended X-ray absorption fine structure (EXAFS) spectroscopy measurements, combined with desorption experiments and thermodynamic calculations, were used to evaluate the solubility of metal contaminants (Zn, Cu, Pb) and determine the nature and fractional amount of Zn species in a near-neutral pH (6.5-7.0) truck-farming soil contaminated by sewage irrigation for one hundred years. Zn is the most abundant metal contaminant in the soil (1103 mg/kg), followed by Pb (535 mg/kg) and Cu (290 mg/kg). The extractability of Zn, Pb, and Cu with citrate, S,S-ethylenediaminedisuccinic acid (EDDS), and ethylenediaminetetraacetic acid (EDTA) was measured as a function of time (24 h, 72 h, 144 h), and also as a function of the number of applications of the chelant (5 applications each with 24 h of contact time). Fifty-three percent of the Zn was extracted after 144 h with citrate, 51% with EDDS and 46% with EDTA, compared to 69, 87, and 61% for Cu, and 24, 40, and 34% for Pb. Renewing the extracting solution removed more of the metals. Seventy-nine, 65, and 57% of the Zn was removed after five cycles with citrate, EDDS and EDTA, respectively, compared to 88, 100, and 72% for Cu, and 91, 65, and 47% for Pb. Application to the untreated soil of μ-SXRF, laterally resolved μ-EXAFS combined with principal component analysis, and bulk averaging powder EXAFS with linear least-squares combination fit of the data, identified five Zn species: Zn-sorbed ferrihydrite, Zn phosphate, Zn-containing trioctahedral phyllosilicate (modeled by the Zn kerolite, Si₄(Mg_1.65Zn_1.35)O₁₀(OH)₂ · nH₂O), willemite (Zn₂SiO₄), and gahnite (ZnAl₂O₄), in proportions of ∼30, 28, 24, 11, and less than 10%, respectively (precision: 10% of total Zn). In contrast to Cu and Pb, the same fractional amount of Zn was extracted after 24 h contact time with the three chelants (40-43% of the initial content), suggesting that one of the three predominant Zn species was highly soluble under the extraction conditions. Comparison of EXAFS data before and after chemical treatment revealed that the Zn phosphate component was entirely and selectively dissolved in the first 24 h of contact time. Preferential dissolution of the Zn phosphate component is supported by thermodynamic calculations. Despite the long-term contamination of this soil, about 79% of Zn, 91% of Pb, and 100% of Cu can be solubilized in the laboratory on a time scale of a few days by chemical complexants. According to metal speciation results and thermodynamic calculations, the lower extraction level measured for Zn is due to the Zn phyllosilicate component, which is less soluble than Zn phosphate and Zn ferrihydrite.     

Uptake of Zn,Cu, Pb,and Cd by water hyacinth in the initial stage of water system remediation

The removal efficiency of water hyacinth for Zn, Cu, Pb and Cd after their entry into an undisturbed fresh water body was studied using minicosms placed within a reservoir. Variable parameters were water pH (6 or 8), single or multi-metal additions, and the plant biomass. The initial concentrations of Zn, Cu, Pb and Cd in water (500, 250, 250 and 50 μg/L, respectively) quickly decreased in the order Pb ≈ Cu ? Cd ≈ Zn in the first days. Metal removal was more efficient at pH 8 than at pH 6, and it was only slightly higher for single metals compared to multi-metal additions. After 8 days the remaining amounts of metals relative to their initial concentrations for multi-metal pollution treatments were 8% and 24% (Cu), 11% and 26% (Pb), 24% and 50% (Cd), and 18% and 57% (Zn) at pH 8 and pH 6, respectively. Increasing plant biomass promoted faster metal removal. The bioconcentration factor (the ratio of the metal concentration in whole plants to the initial metal concentration in water) exceeds 2000 for all metals (with the exception of Zn and Cd at pH 6). It was concluded that the water hyacinth can be successfully used for fast removal of metals in the initial stage of water body remediation.     

Formation of Zn-rich phyllosilicate, Zn-layered double hydroxide and hydrozincite in contaminated calcareous soils

Recent studies demonstrated that Zn-phyllosilicate- and Zn-layered double hydroxide-type (Zn-LDH) precipitates may form in contaminated soils. However, the influence of soil properties and Zn content on the quantity and type of precipitate forming has not been studied in detail so far. In this work, we determined the speciation of Zn in six carbonate-rich surface soils (pH 6.2-7.5) contaminated by aqueous Zn in the runoff from galvanized power line towers (1322-30,090 mg/kg Zn). Based on 12 bulk and 23 micro-focused extended X-ray absorption fine structure (EXAFS) spectra, the number, type and proportion of Zn species were derived using principal component analysis, target testing, and linear combination fitting. Nearly pure Zn-rich phyllosilicate and Zn-LDH were identified at different locations within a single soil horizon, suggesting that the local availabilities of Al and Si controlled the type of precipitate forming. Hydrozincite was identified on the surfaces of limestone particles that were not in direct contact with the soil clay matrix. With increasing Zn loading of the soils, the percentage of precipitated Zn increased from ∼20% to ∼80%, while the precipitate type shifted from Zn-phyllosilicate and/or Zn-LDH at the lowest studied soil Zn contents over predominantly Zn-LDH at intermediate loadings to hydrozincite in extremely contaminated soils. These trends were in agreement with the solubility of Zn in equilibrium with these phases. Sequential extractions showed that large fractions of soil Zn (∼30-80%) as well as of synthetic Zn-kerolite, Zn-LDH, and hydrozincite spiked into uncontaminated soil were readily extracted by 1 M NH₄NO₃ followed by 1 M NH₄-acetate at pH 6.0. Even though the formation of Zn-precipitates allows for the retention of Zn in excess to the adsorption capacity of calcareous soils, the long-term immobilization potential of these precipitates is limited.     

Background levels and baseline values of available heavy metals in Mediterranean greenhouse soils (Spain)

This study determines extractable levels of Cd, Cu, Pb, Zn, Ni and Co in western Almería (Spain) greenhouse surface soil horizons using EDTA solution, which is identified as the fraction available for organisms and plants. It also establishes background levels, geochemical baseline concentration and reference values (RV), and investigates the possible relationships between soil properties and elemental concentrations. The results show that the soil concentration of these extractable heavy metals was high as those reported by other authors for Spanish agricultural soils. The available RV concentrations obtained (mg kg⁻¹) were: Cd 0.17, Cu 1.6, Pb 13.8, Zn 5.0 Ni 1.7 and Co 2.9. Using the upper baseline criterion, 95% of greenhouse soils present a relatively higher content of extractable heavy metals given their Cd and Cu concentration. Significant correlations between total and EDTA-extractable metal levels were found for Zn, Pb, Cu, Cd and Ni. Soil properties also related to heavy metals content, suggesting that Cd, Cu, Pb and Zn are of similar origin and relate to anthropic activities, and implies the same interactions and/or relationships among these metals.     

Mercury and other metal and metalloid soil contamination near a Pb/Zn smelter in east Hunan province, China

The spatial distributions of contaminant metals (Hg, Pb, Zn, Cd, Cu) and a metalloid (As) in vegetable plots and paddy fields located near a large scale Pb/Zn smelter in Hunan province, China, were investigated. Soil located 4 km from the smelter was severely contaminated, with maximum concentrations of Hg, Pb, Zn, Cd, Cu and As as high as 2.89, 1200, 3350, 41.1, 157 and 93 mg kg⁻¹, respectively. Concentrations of soil metal and As decreased with distance in the dominant wind direction. Single-factor assessment indicated pollution levels of Hg, Pb, Zn and Cd were most severe, while pollution levels for Cu and As were less severe. Results from a potential ecological risk assessment indicated high risk associated with the soil within a 4 km radius, with the contribution for each contaminant calculated as follows: Cd (70.0%), Hg (19.4%), Pb (4.8%), As (3.0%), Cu (1.7%) and Zn (1.1%). The forest soil in the nearby city park was also affected by the atmospheric depositions from smelting activities. Soil profiles demonstrated the pollutants were mostly accumulated in the upper 20 cm layer. Contamination of the topsoil with Hg, Pb, Zn, Cd, Cu and As indicated remediation should be considered.     

Competitive adsorption of Cd,Cu, Pb and Zn by different soils of Eastern China

Simultaneous competitive adsorption behavior of Cd, Cu, Pb and Zn onto nine soils with a wide physical–chemical characteristics from Eastern China was measured in batch experiments to assess the mobility and retention of these metals in soils. In the competitive adsorption system, adsorption isotherms for these metals on the soils exhibited significant differences in shape and in the amount adsorbed. As the applied concentration increased, Cu and Pb adsorption increased, while Cd and Zn adsorption decreased. Competition among heavy metals is very strong in acid soils with lower capacity to adsorb metal cations. Distribution coefficients (K _dmedium) for each metal and soil were calculated. The highest K _dmedium value was found for Pb and followed by Cu. However, low K _dmedium values were shown for Zn and Cd. On the basis of the K _dmedium values, the selectivity sequence of the metal adsorption is Pb > Cu > Zn > Cd and Pb > Cu > Cd > Zn. The adsorption sequence of nine soils was deduced from the joint distribution coefficients (K _dΣmedium). This indicated that acid soils with low pH value had lower adsorption capacity for heavy metals, resulting in much higher risk of heavy metal pollution. The sum of adsorbed heavy metals on the soils could well described using the Langmuir equation. The maximum adsorption capacity (Q _m) of soils ranged from 32.57 to 90.09 mmol kg⁻¹. Highly significant positive correlations were found between the K _dΣmedium and Q _m of the metals and pH value and cation exchange capacity (CEC) of soil, suggesting that soil pH and CEC were key factors controlling the solubility and mobility of the metals in soils.     

Geostatistical analyses and fractionation of heavy metals in urban soil from industrial district in Weinan, NW China

The concentrations of metals (Pb, Cr, Ba, Zn, V, Mn, Co, Cu, Ni and As) in 38 soil samples collected from the industrial district in Weinan (NW China) were determined by wavelength dispersive X-ray fluorescence spectrometry. The magnetic parameters of soil including low-/high-frequency susceptibility and frequency-dependent susceptibility were measured. The modified three-step BCR sequential extraction procedure was used to evaluate mobility, availability and persistence of trace elements in urban soil samples. Multivariate (principal component analysis, clustering analysis and correlation analysis) and geostatistical analysis (ArcGIS tools) were applied to the obtained data to evaluate the analytical results and to identify the possible pollution sources of metals as well as geo-spatial distributions. The results revealed that the sampling area was mainly influenced by two main sources: (1) Ba, Cu, Pb, Cr and Zn were mainly derived from industrial sources, which combined with coal combustion as well as traffic factor. The mobility sequence based on the sum of the BCR sequential extraction stages was: Pb (53.79 %) > Zn (51.78 %) > Cu (50.96 %) > Ba (42.59 %) > Cr (18.47 %). Pb was the metal predominantly associated (~46.86 %) with the form bound to Fe/Mn oxides, and the highest percentage of Zn was exchangeable and carbonate-bound fraction. Cu was present mainly in organic fraction, while the residual fraction was the most dominant solid phase pool of Cr (~81.53 %) and Ba (~57.41 %). (2) Mn, V, Co, As and Ni in the study area were consistently from natural sources. The analysis of enrichment factors indicated that urban soils in Weinan City were classified as having significant enrichment by Ba, Cu, Pb, Cr and Zn. The overall results proposed the future tactics for Weinan environment quality control on a local scale that concerned not only the levels of risky, but also the industrial emission abatement techniques as well as urban setting.     

Interactions between Cd,Cu, Pb,and Zn and four different mine soils

The chemical associations of Cd, Cu, Pb, and Zn in four mine soil samples from the Amizour-Bejaia Pb/Zn mine (Algeria) have been investigated by a five-step sequential extraction procedure. Although Cd preferentially binds to carbonates, Cu, Pb, and Zn are mainly associated with the organic and reducible fractions. Batch adsorption experiments with either mono- or multi-metallic solutions are described with the Freundlich isotherm model. Whatever the nature of the soil sample, the sorption behavior for each given metal except Pb is very similar, indicating that the binding sites at the soil surface are progressively occupied by the metal from the solution. On each soil sample, the decreasing order of sorption can be established as Pb >> Cu > Cd > Zn. When the four metals are simultaneously applied to each soil sample, their specific behavior is strongly affected by their interactions and/or competition for the available surface sites: we generally observed isotherm curves with a slight maximum before the plateau at higher solution concentration. Although Cu is only slightly affected by the other metals, in the case of Pb, Cd, and Zn, the sorbed amounts strongly decreased.     

Contamination,bioaccessibility and human health risk of heavy metals in exposed-lawn soils from 28 urban parks in southern China's largest city,Guangzhou

The total concentrations and oral bioaccessibility of heavy metals in surface-exposed lawn soils from 28 urban parks in Guangzhou were investigated, and the health risks posed to humans were evaluated. The descending order of total heavy metal concentrations was Fe > Mn > Pb > Zn > Cu > Cr > Ni > Cd, but Cd showed the highest percentage bioaccessibility (75.96%). Principal component analysis showed that Grouped Cd, Pb, Cr, Ni, Cu and Zn, and grouped Cr and Mn could be controlled two different types of human sources. Whereas, Ni and Fe were controlled by both anthropogenic and natural sources. The carcinogenic risk probabilities for Pb and Cr to children and adults were under the acceptable level (<1 × 10⁻⁴). Hazard Quotient value for each metal and Hazard Index values for all metals studied indicated no significant risk of non-carcinogenic effects to children and adults in Guangzhou urban park soils.     

Bonfires as a potential source of metal pollutants in urban soils,Galway, Ireland

Soils are recipients of contaminants from the burning of metal-containing materials in bonfires. In order to obtain a better understanding of the impacts of bonfires on soils, a total of 218 surface soil samples were collected from a traditional bonfire site in Galway City, Ireland. Concentrations of 14 elements including Al, Ca, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sc, Ti and Zn in 30 selected samples were determined using ICP-OES. Strong variations were observed for these elements. Concentrations of Zn, Cu and Pb were elevated, indicating that these metals may be influenced by human activities. Therefore, concentrations of these three metals were further measured using a portable X-ray fluorescence (P-XRF) analyser (n = 218) and their spatial distribution was investigated using a Geographical Information System (GIS). Soils with elevated metal concentrations, as evident from the spatial distribution maps, coincided with the locations of traditional festival bonfires. The results of this study provide useful information for the management of bonfire sites including the enforcement of a control policy regarding the burning of materials in bonfires.     

Hydrological and geochemical control of metals and arsenic in a Mediterranean river contaminated by acid mine drainage (the Amous River,France); preliminary assessment of impacts on fish (Leuciscus cephalus)

Dissolved and particulate concentrations of metals (Fe, Al, Mn, Co, Ni, Cu, Zn, Cd, Tl, Pb) and As were monitored over a 5 year period in the Amous River downstream of its confluence with a creek severely affected by acid mine drainage (AMD) originating from a former Pb–Zn mine. Water pH ranged from 6.5 to 8.8. Metals were predominantly in dissolved form, except Fe and Pb, which were in particulate form. In the particulate phase, metals were generally associated with Al oxides, whereas As was linked to Fe oxides. Metal concentrations in the dissolved and/or particulate phase were generally higher during the wet season due to higher generation of AMD. Average dissolved (size < 0.22 μm) metal concentrations (μg/L) were 1 ± 4 (Fe), 69 ± 49 (Al), 140 ± 118 (Mn), 4 ± 3 Co, 6 ± 4 (Ni), 1.3 ± 0.8 (Cu), 126 ± 81 (Zn), 1.1 ± 0.7 (Cd), 0.9 ± 0.5 (Tl), 2 ± 3 (Pb). Dissolved As concentrations ranged from 5 to 134 μg/L (30 ± 23 μg/L). During the survey, the concentration of colloidal metals (5 kDa < size < 0.22 μm) was less than 25% of dissolved concentrations. Dissolved metal concentrations were generally higher than the maximum concentrations allowed in European surface waters for priority substances (Ni, Cd and Pb) and higher than the environmental quality standards for other compounds. Using Diffusion Gradient in Thin Film (DGT) probes, metals were shown to be in potentially bioavailable form. The concentrations in Leuciscus cephalus were below the maximum Pb and Cd concentrations allowed in fish muscle for human consumption by the European Water Directive. Amongst the elements studied, only As, Pb and Tl were shown to bioaccumulate in liver tissue (As, Pb) or otoliths (Tl). Bioaccumulation of metals or As was not detected in muscle.