Chemical and isotopic tracers of the contribution of microbial gas in Devonian organic-rich shales and reservoir sandstones,northern Appalachian Basin

In this study, the geochemistry and origin of natural gas and formation waters in Devonian age organic-rich shales and reservoir sandstones across the northern Appalachian Basin margin (western New York, eastern Ohio, northwestern Pennsylvania, and eastern Kentucky) were investigated. Additional samples were collected from Mississippian Berea Sandstone, Silurian Medina Sandstone and Ordovician Trenton/Black River Group oil and gas wells for comparison. Dissolved gases in shallow groundwaters in Devonian organic-rich shales along Lake Erie contain detectable CH₄ (0.01–50.55 mol%) with low δ¹³C–CH₄ values (−74.68 to −57.86‰) and no higher chain hydrocarbons, characteristics typical of microbial gas. Nevertheless, these groundwaters have only moderate alkalinity (1.14–8.72 meq/kg) and relatively low δ¹³C values of dissolved inorganic C (DIC) (−24.8 to −0.6‰), suggesting that microbial methanogenesis is limited. The majority of natural gases in Devonian organic-rich shales and sandstones at depth (>168 m) in the northern Appalachian Basin have a low CH₄ to ethane and propane ratios (3–35 mol%; C₁/C₂ + C₃) and high δ¹³C and δD values of CH₄ (−53.35 to −40.24‰, and −315.0 to −174.6‰, respectively), which increase in depth, reservoir age and thermal maturity; the molecular and isotopic signature of these gases show that CH₄ was generated via thermogenic processes. Despite this, the geochemistry of co-produced brines shows evidence for microbial activity. High δ¹³C values of DIC (>+10‰), slightly elevated alkalinity (up to 12.01 meq/kg) and low SO₄ values (<1 mmole/L) in select Devonian organic-rich shale and sandstone formation water samples suggest the presence of methanogenesis, while low δ¹³C–DIC values (<−22‰) and relatively high SO₄ concentrations (up to 12.31 mmole/L) in many brine samples point to SO₄ reduction, which likely limits microbial CH₄ generation in the Appalachian Basin. Together the formation water and gas results suggest that the vast majority of CH₄ in the Devonian organic-rich shales and sandstones across the northern Appalachian Basin margin is thermogenic in origin. Small accumulations of microbial CH₄ are present at shallow depths along Lake Erie and in western NY.     

Gases in Taiwan mud volcanoes: Chemical composition,methane carbon isotopes,and gas fluxes

Mud volcanoes are important pathways for CH₄ emission from deep buried sediments; however, the importance of gas fluxes have hitherto been neglected in atmospheric source budget considerations. In this study, gas fluxes have been monitored to examine the stability of their chemical compositions and fluxes spatially, and stable C isotopic ratios of CH₄ were determined, for several mud volcanoes on land in Taiwan. The major gas components are CH₄ (>90%), “air” (i.e. N₂ + O₂ + Ar, 1–5%) and CO₂ (1–5%) and these associated gas fluxes varied slightly at different mud volcanoes in southwestern Taiwan. The Hsiao-kun-shui (HKS) mud volcano emits the highest CH₄ concentration (CH₄ > 97%). On the other hand, the Chung-lun mud volcano (CL) shows CO₂ up to 85%, and much lower CH₄ content (<37%). High CH₄ content (>90%) with low CO₂ (<0.2%) are detected in the mud volcano gases collected in eastern Taiwan. It is suggestive that these gases are mostly of thermogenic origin based on C₁ (methane)/C₂ (ethane) + C₃ (propane) and δ¹³C_CH4 results, with the exception of mud volcanoes situated along the Gu-ting-keng (GTK) anticline axis showing unique biogenic characteristics. Only small CH₄ concentration variations, <2%, were detected in four on-site short term field-monitoring experiments, at Yue-shi-jie A, B, Kun-shui-ping and Lo-shan A. Preliminary estimation of CH₄ emission fluxes for mud volcanoes on land in Taiwan fall in a range between 980 and 2010 tons annually. If soil diffusion were taken into account, the total amount of mud volcano CH₄ could contribute up to 10% of total natural CH₄ emissions in Taiwan.     

Methane microseepage from different sectors of the Yakela condensed gas field in Tarim Basin,Xinjiang, China

Methane microseepage is the result of natural gas migration from subsurface hydrocarbon accumulations to the Earth’s surface, and it is quite common in commercial petroleum fields. While the role of microseepage as a pathfinder in petroleum exploration has been known for about 80 a, its significance as an atmospheric CH₄ source has only recently been studied, and flux data are currently available only in the USA and Europe. With the aim of increasing the global data-set and better understanding flux magnitudes and variabilities, microseepage is now being extensively studied in China. A static flux chamber method was recently applied to study microseepage emissions into the atmosphere in four different sectors of the Yakela condensed gas field in Tarim Basin, Xinjiang, China, and specifically in: (a) a faulted sector, across the Luntai fault systems; (b) an oil–water interface sector, at the northern margin of the field; (c) an oil–gas interface sector, in the middle of the field; (d) an external area, outside the northern gas field boundaries. The results show that positive CH₄ fluxes are pervasive in all sectors and therefore, only part of the CH₄ migrating from the deep oil–gas reservoirs is consumed in the soil by methanotrophic oxidation. The intensity of gas seepage seems to be controlled by subsurface geologic settings and lateral variabilities of natural gas pressure in the condensed gas field. The highest CH₄ fluxes, up to ∼14 mg m⁻² d⁻¹ (mean of 7.55 mg m⁻² d⁻¹) with higher spatial variability (standard deviation, σ: 2.58 mg m⁻² d⁻¹), occur in the Luntai fault sector. Merhane flux was lower in the oil–water area (mean of 0.53 mg m⁻² d⁻¹) and the external area (mean of 1.55 mg m⁻² d⁻¹), and at the intermediate level in the gas–oil sector (mean of 2.89 mg m⁻² d⁻¹). These values are consistent with microseepage data reported for petroleum basins in the USA and Europe. The build-up of methane concentration in the flux chambers is always coupled with an enrichment of ¹³C, from δ¹³C₁ of −46‰ to −42.5‰ (VPDB), which demonstrates that seeping methane is thermogenic, as that occurring in the deep Yakela reservoir. Daily variations of microseepage are very low, with minima in the afternoon, corresponding to higher soil temperature (and higher methanotrophic consumption), and maxima in the early morning (when soil temperatures are lowest). A preliminary and rough estimate of the total amount of CH₄ exhaled from the Yakela field is in the order of 10² tonnes a⁻¹.     

Hydrocarbon gases associated with permafrost in the Mackenzie Delta,Northwest Territories,Canada

Molecular and isotopic analyses of core gas samples from 3 permafrost research core holes (92GSCTAGLU, 92GSCKUMAK, 92GSCUNIPKAT; sample core depths ranging from 0.36 to 413.82 m) in the Mackenzie Delta of the Northwest Territories of Canada reveal the presence of hydrocarbon gases from both microbial and thermogenic sources. Analyses of most headspace and blended gas samples from the ice-bonded permafrost portion of the core holes yielded C₁/(C₂+C₃) hydrocarbon gas ratios and CH₄–C isotopic compositions (δ¹³C CH₄) indicative of microbially sourced CH₄ gas. However, near the base of ice-bonded permafrost and into the underlying non-frozen stratigraphic section, an increase in ethane (C₂) concentrations, decreases in C₁/(C₂+C₃) hydrocarbon gas ratios, and CH₄–C isotopic (δ¹³C CH₄) data indicate the presence of hydrocarbon gases derived from a thermogenic source. The thermogenic gas below permafrost in the Mackenzie Delta likely migrated from deeper hydrocarbon accumulations and/or directly from thermally mature hydrocarbon source rocks.     

Hazardous gas emissions from the flanks of the quiescent Colli Albani volcano (Rome,Italy)

Gas hazard was evaluated in the three most important cold gas emission zones on the flanks of the quiescent Colli Albani volcano. These zones are located above structural highs of the buried carbonate basement which represents the main regional aquifer and the main reservoir for gas rising from depth. All extensional faults affecting the limestone reservoir represent leaking pathways along which gas rises to the surface and locally accumulates in shallow permeable horizons forming pressurized pockets that may produce gas blowout when reached by wells. The gas, mainly composed of CO₂ (>90 vol.%), contains appreciable quantities of H₂S (0.35–6 vol.%), and both represent a potentially high local hazard. Both gases are denser than air and accumulate near ground where they may reach hazardous concentrations, and lethal accidents frequently occur to animals watering at local ponds. In order to evaluate the rate of degassing and the related hazard, CO₂ and H₂S diffuse soil flux surveys have been repeatedly carried out using an accumulation chamber. The viscous gas flux of some important discrete emissions has been evaluated and the CO₂ and H₂S air concentration measured by portable devices and by Tunable Diode Laser profiles. The minimum potential lethal concentration of the two gases (250 ppm for H₂S and 8 vol.% for CO₂) is 320 times higher for CO₂, whereas the CO₂/H₂S concentration ratio in the emitted natural gas is significantly lower (15–159). This explains why H₂S reaches hazardous, even lethal, concentrations more frequently than CO₂. A relevant hazard exists for both gases in the depressed zones (channels, excavations) particularly in the non-windy early hours of the day.     

Stable carbon isotope behaviour of natural seepage of deep underground C-rich methane detected along a fault zone and adsorbed in mudstone: Tokyo Bay area,Japan

Gas was sampled regionally, including by drilling into faults, in the South Kanto gas-field around Tokyo Bay, Japan. Gas samples were collected from cores in a gas sampling container immediately after drilling. A value of δ¹³C₁ = −44.3‰ was obtained for gas in the container and δ¹³C₁ = −36.3‰ for seeping gas in a fault zone. However, typical CH₄ in this dissolved-in-water gas-field is mainly depleted in ¹³C, and δ¹³C₁ values range from −66‰ to −68‰ owing to microbial degradation of organic material. ¹³C-rich CH₄ is so far uncommon in the South Kanto gas-field. Seepages were observed from the surface along the north–south fault zone. The natural gas is stored below the sandstone layer by impermeable mudstone underlying the boundary at a depth of 30 m. Gas seepages were not observed below a depth of 40 m. Gas rises along the fault zone dissolved-in-groundwater up to the shallow region and then separates from the groundwater. ¹³C-rich CH₄ (adsorbed CH₄) was found to have desorbed from drilled mudstone core samples taken at depths of 1400–1900 m in the main gas-production strata. Similarly, ¹³C-rich CH₄ was found in black shale overlying the oceanic crust forming part of a sedimentary accretionary prism underling the Tokyo region. It also appears in the spring-water of spa wells, originating at a depth of 1200–1500 m along a tectonic line. Methane generated by microbial degradation of organic material through CO₂ reduction in the South Kanto gas-field mainly originates as biogenic gas mixed with a small amount of ¹³C-rich CH₄, derived from thermogenic gas without oil components in strata. It is assumed that ¹²C-rich CH₄ is easily detached from core or pore water through gas production, whereas ¹³C-rich CH₄ is strongly adsorbed on the surfaces of particles. The ¹³C-rich CH₄ rises along the major tectonic line or up the 50 m wide normal fault zone from relatively deep sources in the Kanto region.     

Carbon and hydrogen isotopic compositions of products of open-system catalytic hydrogenation of CO2: Implications for abiogenic hydrocarbons in Earth’s crust

This paper reports the isotope effects in an open-system Fischer-Tropsch type (FTT) synthesis, with implications for the origin of natural abiogenic hydrocarbons. The starting form of carbon was CO₂, with carbon and hydrogen isotopic compositions measured for products of catalytic hydrogenation of CO₂ on iron and cobalt catalysts (FTCO₂-Fe and FTCO₂-Co) at 350 and 245 °C, respectively, and 10 MPa. The carbon isotopic composition of the resulting saturated hydrocarbons (alkanes) as a function of carbon number shows a positive trend for both FTCO₂-Fe and FTCO₂-Co, with a fractionation of 2-4‰ and 3-6‰ between CH₄ and C₂H₆ over the Fe and Co catalysts, respectively. The unsaturated hydrocarbons (alkenes) do not show any trend. A strong kinetic isotope fractionation (>40‰) occurred between CO₂ and CH₄ in both experiments. The hydrogen isotope fractionation between alkanes appeared to be similar to that found in natural (thermogenic and biogenic) gases, with enrichment in deuterium of longer hydrocarbon chains; the dominant H/D fractionation occurred between CH₄ and C₂H₆. Alkenes in the products of the FTCO₂-Fe reaction are enriched in deuterium (∼50‰) and do not show any trend versus carbon number. We suggest that other than FTT reactions or a simple mixing are responsible for the occurrence of the inverse isotopic trends in both δ¹³C and δD found in light hydrocarbons in some terrestrial environments and meteorites.     

Gas accumulation from oil cracking in the eastern Tarim Basin: A case study of the YN2 gas field

Oil and gas exploration in eastern Tarim Basin, NW China has been successful in recent years, with several commercial gas accumulations being discovered in a thermally mature to over-mature region. The Yingnan2 (YN2) gas field, situated in the Yingnan structure of the Yingjisu Depression, produces gases that are relatively enriched in nitrogen and C₂₊ alkanes. The δ¹³C₁ (−38.6‰ to −36.2‰) and δ¹³C₂ values (−30.9‰ to −34.7‰) of these gases are characteristic of marine sourced gases with relatively high maturity levels. The distributions of biomarkers in the associated condensates suggest close affinities with the Cambrian–Lower Ordovician source rocks which, in the Yingjisu Sag, are currently over-mature (with 3–4%Ro). Burial and thermal maturity modeling results indicate that paleo-temperatures of the Cambrian–Lower Ordovician source rocks had increased from 90 to 210 °C during the late Caledonian orogeny (458–438 Ma), due to rapid subsidence and sediment loading. By the end of Ordovician, hydrocarbon potential in these source rocks had been largely exhausted. The homogenization temperatures of hydrocarbon fluid inclusions identified from the Jurassic reservoirs of the YN2 gas field suggest a hydrocarbon emplacement time as recent as about 10 Ma, when the maturity levels of Middle–Lower Jurassic source rocks in the study area were too low (<0.7%Ro) to form a large quantity of oil and gas. The presence of abundant diamondoid hydrocarbons in the associated condensates and the relatively heavy isotopic values of the oils indicate that the gases were derived from thermal cracking of early-formed oils. Estimation from the stable carbon isotope ratios of gaseous alkanes suggests that the gases may have been formed at temperatures well above 190 °C. Thus, the oil and gas accumulation history in the study area can be reconstructed as follows: (1) during the late Caledonian orogeny, the Cambrian–Lower Ordovician marine source rocks had gone through the peak oil, wet gas and dry gas generation stages, with the generated oil and gas migrating upwards along faults and fractures to form early oil and gas accumulations in the Middle–Upper Ordovician and Silurian sandstone reservoirs; (2) since the late Yanshanian orogeny, the early oil accumulations have been buried deeper and oil has undergone thermal cracking to form gas; (3) during the late Himalayan orogeny, the seals for the deep reservoirs were breached; and the gas and condensates migrated upward and eventually accumulating in the relatively shallow Jurassic reservoirs.     

The role of metal sulfates in thermochemical sulfate reduction (TSR) of hydrocarbons: Insight from the yields and stable carbon isotopes of gas products

The mechanism of thermochemical sulfate reduction (TSR) was investigated by separately heating n-C₂₄ with three different sulfates (CaSO₄, Na₂SO₄, MgSO₄) in sealed gold tubes at 420 °C and measuring the stable carbon isotope values of hydrocarbon (C₁-C₅) and non-hydrocarbon (CO₂) products. Extensive TSR was observed with the MgSO₄ reactant as reflected by increasing concentrations of H₂S, ¹³C depleted CO₂ and relatively low concentrations of H₂ (compared to the control). H₂S yields were already very high at the first monitoring time (12 h) when the temperature had just reached 420 °C, suggesting that TSR had commenced well prior to this temperature. Only trace amounts of n-C₂₄ and secondary C₃-C₅ alkanes were detected at 12 h, reflecting the efficient TSR utilization of the reactant and lower molecular weight alkane products. Ethane levels were still relatively high at 12 h, but declined thereafter as it was subject to TSR in the absence of higher molecular weight alkanes which had already been utilized. Methane yields were consistently high throughout the 48 h MgSO₄ treatment. The temporal decrease in the concentrations of alkanes available for TSR may also contribute to the sharp enhancement of CO₂ after 36 h. Absence or dampening of the molecular and isotopic trends of MgSO₄ TSR was observed with Na₂SO₄ and CaSO₄ respectively, directly reflecting the levels of TSR reached using these sulfate treatments.For all treatments, the δ¹³C values of C_1-5n-alkanes showed an increase with both molecular weight and treatment time. MgSO₄ TSR led to a 5-10‰ increase in the δ¹³C values of the C₁-C₅ hydrocarbons and a 20‰ decrease in the δ¹³C value of CO₂. The significant ¹³C depletion of the CO₂ may be due to co-production of ¹³C enriched MgCO₃, although this remains unproven as the δ¹³C of MgCO₃ was not measured. The difference in the δ¹³C values of ethane and propane (Δδ¹³C_EP) increased in magnitude with the degree of TSR, and this trend could be used to help evaluate the occurrence and extent of TSR in subsurface gas reservoirs.     

Geochemical characterization of secondary microbial gas occurrence in the Songliao Basin, NE China

A suite of natural gases from the northern Songliao Basin in NE China were characterized for their molecular and carbon isotopic composition. Gases from shallow reservoirs display clear geochemical evidence of alteration by biodegradation, with very high dryness (C₁/C₂₊ > 100), high C₂/C₃ and i-C₄/n-C₄ ratios, high nitrogen content and variable carbon dioxide content. Isotopic values show wide range variations (δ¹³C_CH4 from −79.5‰ to −45.0‰, δ¹³C_C2H6 from −53.7‰ to −32.2‰, δ¹³C_C3H8 from −36.5‰ to −20.1‰, δ¹³C_nC4H10 from −32.7‰ to −24.5‰, and δ¹³C_CO2 from −21.6‰ to +10.5‰). A variety of genetic types can be recognized on the basis of chemical and isotopic composition together with their geological occurrence. Secondary microbial gas generation was masked by primary microbial gas and the mixing of newly generated methane with thermogenic methane already in place in the reservoir can cause very complicated isotopic signatures. System openness also was considered for shallow biodegraded gas accumulations. Gases from the Daqing Anticline are relatively wet with ¹³C enriched methane and ¹³C depleted CO₂, representing typically thermogenic origin. Gases within the Longhupao-Da’an Terrace have variable dryness, ¹³C enriched methane and variable δ¹³C of CO₂, suggesting dominant thermogenic origin and minor secondary microbial methane augment. The Puqian-Ao’nan Uplift contains relatively dry gas with ¹³C depleted methane and ¹³C enriched CO₂, typical for secondary microbial gas with a minor part of thermogenic methane. Gas accumulations in the Western Slope are very dry with low carbon dioxide concentrations. Some gases contain ¹³C depleted methane, ethane and propane, indicating low maturity/primary microbial origin. Recognition of varying genetic gas types in the Songliao Basin helps explain the observed dominance of gas in the shallow reservoir and could serve as an analogue for other similar shallow gas systems.     

The separate production of H2S from the thermal reaction of hydrocarbons with magnesium sulfate and sulfur: Implications for thermal sulfate reduction

The yields and stable C and H isotopic composition of gaseous products from the reactions of pure n-C₂₄ with (1) MgSO₄; and (2) elemental S in sealed Au-tubes at a series of temperatures over the range 220–600 °C were monitored to better resolve the reaction mechanisms. Hydrogen sulfide formation from thermochemical sulfate reduction (TSR) of n-C₂₄ with MgSO₄ was initiated at 431 °C, coincident with the evolution of C₂–C₅ hydrocarbons. Whereas the yields of H₂S increased progressively with pyrolysis temperature, the hydrocarbon yields decreased sharply above 490 °C due to subsequent S consumption. Ethane and propane were initially very ¹³C depleted, but became progressively heavier with pyrolysis temperature and were more ¹³C enriched than the values of a control treatment conducted on just n-C₂₄ above 475 °C. TSR of MgSO₄ also led to progressively higher concentrations of CO₂ showing relatively low δ¹³C values, possibly due to input of isotopically light CO₂ derived from gaseous hydrocarbon oxidation (e.g., more depleted CH₄).     

Evaluating the gas content of coals and isolated maceral concentrates from the Paleocene Guasare Coalfield,Venezuela

This work presents the results from evaluating the gases sorbed by coal samples extracted from the Paleocene Guasare Coalfield (Marcelina Formation, northwestern Venezuela), as well as by their distinct maceral concentrates. The aim of this work has been to obtain an initial experimental main value of the gas content per unit weight of high volatile bituminous A coal samples from the open-pit Paso Diablo mine. An additional goal was to study differences in the CH₄ storage ability of the distinct maceral groups forming part of the coal matrix. Both the coal samples and the maceral concentrates were studied by thermogravimetric analysis (TGA) in order to determine the temperature to be used in subsequent experiments. On-line analyses of hydrocarbons (C₁, C₂, C₃) and CO₂ yielded gas concentrations, plus δ¹³C values. Thermogenic gas is prevalent in the Guasare coals with vitrinite reflectance (%R_o) values from 0.65% to 0.88%. The amount of gas retained in the coals and maceral concentrates was measured with a special device that allows determination of the volume of gas sorbed by a solid sample subjected to controlled thermal treatment. The average coalbed gas concentration obtained was 0.51 cm³/g. The following list of maceral concentrates shows the relative capacity for the volume of sorbed gas per unit weight: inertinite > low-density vitrinite > liptinite ≈ high-density vitrinite. It is concluded that the gas volumes retained in the distinct maceral concentrates are not controlled by porosity but rather by their microscopic morphology.     

Palaeo-hydrogeological control on groundwater As levels in Red River delta,Vietnam

To study the geological control on groundwater As concentrations in Red River delta, depth-specific groundwater sampling and geophysical logging in 11 monitoring wells was conducted along a 45 km transect across the southern and central part of the delta, and the literature on the Red River delta’s Quaternary geological development was reviewed. The water samples (n = 30) were analyzed for As, major ions, Fe²⁺, H₂S, NH₄, CH₄, δ¹⁸O and δD, and the geophysical log suite included natural gamma-ray, formation and fluid electrical conductivity. The SW part of the transect intersects deposits of grey estuarine clays and deltaic sands in a 15–20 km wide and 50–60 m deep Holocene incised valley. The NE part of the transect consists of 60–120 m of Pleistocene yellowish alluvial deposits underneath 10–30 m of estuarine clay overlain by a 10–20 m veneer of Holocene sediments. The distribution of δ¹⁸O-values (range −12.2‰ to −6.3‰) and hydraulic head in the sample wells indicate that the estuarine clay units divide the flow system into an upper Holocene aquifer and a lower Pleistocene aquifer. The groundwater samples were all anoxic, and contained Fe²⁺ (0.03–2.0 mM), Mn (0.7–320 μM), SO₄ (<2.1 μM–0.75 mM), H₂S (<0.1–7.0 μM), NH₄ (0.03–4.4 mM), and CH₄ (0.08–14.5 mM). Generally, higher concentrations of NH₄ and CH₄ and low concentrations of SO₄ were found in the SW part of the transect, dominated by Holocene deposits, while the opposite was the case for the NE part of the transect. The distribution of the groundwater As concentration (<0.013–11.7 μM; median 0.12 μM (9 μg/L)) is related to the distribution of NH₄, CH₄ and SO₄. Low concentrations of As (?0.32 μM) were found in the Pleistocene aquifer, while the highest As concentrations were found in the Holocene aquifer. PHREEQC-2 speciation calculations indicated that Fe²⁺ and H₂S concentrations are controlled by equilibrium for disordered mackinawite and precipitation of siderite. An elevated groundwater salinity (Cl range 0.19–65.1 mM) was observed in both aquifers, and dominated in the deep aquifer. A negative correlation between aqueous As and an estimate of reduced SO₄ was observed, indicating that Fe sulphide precipitation poses a secondary control on the groundwater As concentration.     

Potential of microbial methane formation in a high-temperature hydrocarbon seep

Hydrocarbon seepage is a surface expression where fluids mixed with sediments and hydrocarbons are expelled through fracture systems that potentially tap into gas–petroleum reservoirs. Hydrocarbons released from most seeps appear to be thermogenic on the basis of their relative abundance and isotopic composition. The potential for subsurface microbial processes modifying these geochemical fingerprints remains poorly constrained. In this study, microcosm incubations were conducted on mud slurries supplied with/without various methanogenic precursors at temperatures ranging from ambient conditions to 90 °C, in order to assess microbial CH₄ formation in the subsurface beneath hydrocarbon seeps. The analyses indicated that CH₄ production was positive at ?80 °C, regardless of whether or not or which precursors were added. However, the pattern of CH₄ production rates varied with the precursor and temperature. In general, the optimum CH₄ production from H₂/CO₂ and formate occurred over a wide range of temperatures (?40 °C), whereas that from acetate, methanol and methylamine was restricted to relatively lower temperatures (40–50 °C). The CH₄ recoveries, together with the C isotopic compositions of CH₄, further indicated that the quantities of CH₄ produced could not completely account for the quantities of precursor consumed, suggesting that a complex metabolic network was involved in the transformation of the added precursor and organic C inherited from inoculated sediments. Microbial CH₄ was estimated to constitute 7–61% of the CH₄ observed using experimentally-derived apparent isotope fractionations as the end member compositions. This illustrates the possibility that microbial CH₄ produced at shallower depths could quantitatively and isotopically alter deeply-sourced thermogenic CH₄ in hydrocarbon seep environments.     

Identification and implications of fight hydrocarbon fluid inclusions from the Proterozoic Bidjovagge gold-copper deposit, Finnmark, Norway

Carbonic fluid inclusions were observed in quartz-bearing veins at the Proterozoic Bidjovagge AuCu deposit within the Kautokeino greenstone belt in Norway, where mineralization occurred in oxidation zones of graphitic schists. A primary fluid inclusion zonation was observed with C0₂-rich fluid inclusions in the structural footwall of the deposit, and CH₄-rich inclusions within the ore zone in the oxidation zone. Microthermometry of the primary hydrocarbon inclusions revealed 2 groups; (1) a group which homogenized between −125°C and the critical temperature of CH₄ (−82.1°C), which indicated the presence of pure CH₄, and (2) a group which homogenized between the critical temperature of CH₄ and −42°C, which indicated the presence CH₄ and higher hydrocarbons (HHC). Raman microprobe analyses of the first group confirmed the presence of CH₄. The second inclusion group were fluorescent, and Raman spectra clearly displayed CH₄,C₂H₆, and rarer C₃H₈ peaks. A typical feature of the Raman spectra were elevated baselines at the hydrocarbon peaks. Carbon peaks were also usually detected in each inclusion by Raman analysis. Bulk gas chromatography analyses of samples containing the first group (CH₄) indicated the presence of CH₄ and low concentrations of C₂H₆ and C₃H₈. Gas chromatography analyses of samples containing the second group (CH₄ and higher hydrocarbons) confirmed the presence of CH₄, and higher hydrocarbons such as C₂H₆ and C₃H₈ and also butanes. Based on the spacial zonation of hydrocarbons and the estimated PT conditions of 300 to 375°C and 2 to 4 kbars, the authors suggest an abiotic origin for the hydrocarbons. It is suggested that the hydrothermal fluids oxidized the graphitic schist, precipitated Cu and Au and formed light gas hydrocarbons.     

Geochemistry and origin of gas pools in the Gaoqing-Pingnan fault zone,Jiyang Depression

In the surroundings of the Gaoqing-Pingnan fault zone are developed quite a number of gas reservoirs. Based on gas compositions, they can be divided into two groups, i.e., CO2 and CH4. Their composition and isotope geochemistry were dealt with in this study. The CO2 contents range from 60.72%–99.99%, the δ13CCO2 values from -3.41‰– -9.8‰, and the 3He/4He ratios from 4.35×10-6–6.35×10-6 (i.e. R/Ra=4.45–4.35). Based on the data on composition and isotope geochemistry, deep geological background, deep faults and volcanic rocks, it is shown that CO2 ,distributed in the Gaoqing area, mostly originated from mantle-source inorganic matter which is associated with magmatic rocks. The favorable tectonic environment for the formation of CO2 reservoirs is the rift, which is related to great fault-magmatic activity, the formation of CO2 gas pools and their space-time correlation to the most recent magmatic activities. Hydrocarbon gas pools occur in the Huagou area. The CH4 contents are within the range of 88.83%–99.12%, and the δ13CCH4 values, -44.7‰– -54.39‰. This indicates that the hydrocarbon gas resulted from the decomposition of oil-type gas at high temperatures. Volcanic rocks in the CO2 gas pool-and CH4 gas pool-distributed areas show significant differences in Fe2O3 and FeO contents. This has proven that the hydrocarbon gas may have resulted from various chemical reactions. Magmatic activities are the primary reason for the distribution of CO2 and CH4 gas pools in the Gaoqing-Pingnan fault zone.     

Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data

To understand reaction pathways and isotope systematics during mineral-catalyzed abiotic synthesis of hydrocarbons under hydrothermal conditions, experiments involving magnetite and CO₂ and H₂-bearing aqueous fluids were conducted at 400 °C and 500 bars. A robust technique for sample storage and transfer from experimental apparatus to stable isotope mass spectrometer provides a methodology for integration of both carbon and hydrogen isotope characterization of reactants and products generated during abiogenic synthesis experiments. Experiments were performed with and without pretreatment of magnetite to remove background carbon associated with the mineral catalyst. Prior to experiments, the abundance and carbon isotope composition of all carbon-bearing components were determined. Time-series samples of the fluid from all experiments indicated significant concentrations of dissolved CO and C₁-C₃ hydrocarbons and relatively large changes in dissolved CO₂ and H₂ concentrations, consistent with formation of additional hydrocarbon components beyond C₃. The existence of relatively high dissolved alkanes in the experiment involving non-pretreated magnetite in particular, suggests a complex catalytic process, likely involving reinforcing effects of mineral-derived carbon with newly synthesized hydrocarbons at the magnetite surface. Similar reactions may be important mechanisms for carbon reduction in chemically complex natural hydrothermal systems. In spite of evidence supporting abiotic hydrocarbon formation in all experiments, an “isotopic reversal” trend was not observed for ¹³C values of dissolved alkanes with increasing carbon number. This may relate to the specific mechanism of carbon reduction and hydrocarbon chain growth under hydrothermal conditions at elevated temperatures and pressures. Over time, significant ¹³C depletion in CH₄ suggests either depolymerization reactions occurring in addition to synthesis, or reactions between the C₁-C₃ hydrocarbons and carbon species absorbed on mineral surfaces and in solution.     

Potential environmental issues of CO2 storage in deep saline aquifers: Geochemical results from the Frio-I Brine Pilot test,Texas, USA

Sedimentary basins in general, and deep saline aquifers in particular, are being investigated as possible repositories for large volumes of anthropogenic CO₂ that must be sequestered to mitigate global warming and related climate changes. To investigate the potential for the long-term storage of CO₂ in such aquifers, 1600 t of CO₂ were injected at 1500 m depth into a 24-m-thick “C” sandstone unit of the Frio Formation, a regional aquifer in the US Gulf Coast. Fluid samples obtained before CO₂ injection from the injection well and an observation well 30 m updip showed a Na–Ca–Cl type brine with ∼93,000 mg/L TDS at saturation with CH₄ at reservoir conditions; gas analyses showed that CH₄ comprised ∼95% of dissolved gas, but CO₂ was low at 0.3%. Following CO₂ breakthrough, 51 h after injection, samples showed sharp drops in pH (6.5–5.7), pronounced increases in alkalinity (100–3000 mg/L as HCO₃) and in Fe (30–1100 mg/L), a slug of very high DOC values, and significant shifts in the isotopic compositions of H₂O, DIC, and CH₄. These data, coupled with geochemical modeling, indicate corrosion of pipe and well casing as well as rapid dissolution of minerals, especially calcite and iron oxyhydroxides, both caused by lowered pH (initially ∼3.0 at subsurface conditions) of the brine in contact with supercritical CO₂.     

Detailed compositional analysis of gas seepage at the National Carbon Storage Test Site,Teapot Dome,Wyoming, USA

A baseline determination of CO₂ and CH₄ fluxes and soil gas concentrations of CO₂ and CH₄ was made over the Teapot Dome oil field in the Naval Petroleum Reserve No. 3 (NPR-3) in Wyoming, USA. This was done in anticipation of experimentation with CO₂ sequestration in the Pennsylvanian Tensleep Sandstone underlying the field at a depth of 1680 m.The baseline data were collected during the winter, 2004 in order to minimize near-surface biological activity in the soil profile. The baseline data were used to select anomalous locations that may be the result of seeping thermogenic gas, along with background locations. Five 10-m holes were drilled, 3 of which had anomalous gas microseepage, and 2 were characterized as “background.” These were equipped for nested gas sampling at depths of 10-, 5-, 3-, 2-, and 1-m depths. Methane concentrations as high as 170,000 ppmv (17%) were found, along with high concentrations of C₂H₆, C₃H₈, n-C₄H₁₀, and i-C₄H₁₀. Much smaller concentrations of C₂H₄ and C₃H₆ were observed indicating the beginning of hydrocarbon oxidation in the anomalous holes. The anomalous 10-m holes also had high concentrations of isotopically enriched CO₂, indicating the oxidation of hydrocarbons. Concentrations of the gases decreased upward, as expected, indicating oxidation and transport into the atmosphere. The ancient source of the gases was confirmed by ¹⁴C determinations on CO₂, with radiocarbon ages approaching 38 ka within 5 m of the surface.Modeling was used to analyze the distribution of hydrocarbons in the anomalous and background 10-m holes. Diffusion alone was not sufficient to account for the hydrocarbon concentration distributions, however the data could be fit with the addition of a consumptive reaction. First-order rate constants for methanotrophic oxidation were obtained by inverse modeling. High rates of oxidation were found, particularly near the surface in the anomalous 10-m holes, demonstrating the effectiveness of the process in the attenuation of CH₄ microseepage. The results also demonstrate the importance of CH₄ measurements in the planning of a monitoring and verification program for geological CO₂ sequestration in sites with significant remaining hydrocarbons (i.e. spent oil reservoirs).     

Indoor and outdoor urban atmospheric CO2: Stable carbon isotope constraints on mixing and mass balance

From July to November 2009, concentrations of CO₂ in 78 samples of ambient air collected in 18 different interior spaces on a university campus in Dallas, Texas (USA) ranged from 386 to 1980 ppm. Corresponding δ¹³C values varied from −8.9‰ to −19.4‰. The CO₂ from 22 samples of outdoor air (also collected on campus) had a more limited range of concentrations from 385 to 447 ppm (avg. = 408 ppm), while δ¹³C values varied from −10.1‰ to −8.4‰ (avg.=-9.0‰). In contrast to ambient indoor and outdoor air, the concentrations of CO₂ exhaled by 38 different individuals ranged from 38,300 to 76,200 ppm (avg. = 55,100 ppm), while δ¹³C values ranged from −24.8‰ to −17.7‰ (avg. = −21.8‰). The residence times of the total air in the interior spaces of this study appear to have been on the order of 10 min with relatively rapid approaches (∼30 min) to steady-state concentrations of ambient CO₂ gas. Collectively, the δ¹³C values of the indoor CO₂ samples were linearly correlated with the reciprocal of CO₂ concentration, exhibiting an intercept of −21.8‰, with r² = 0.99 and p < 0.001 (n = 78). This high degree of linearity for CO₂ data representing 18 interior spaces (with varying numbers of occupants), and the coincidence of the intercept (−21.8‰) with the average δ¹³C value for human-exhaled CO₂ demonstrates simple mixing between two inputs: (1) outdoor CO₂ introduced to the interior spaces by ventilation systems, and (2) CO₂ exhaled by human occupants of those spaces. If such simple binary mixing is a common feature of interior spaces, it suggests that the intercept of a mixing line defined by two data points (CO₂ input from the local ventilation system and CO₂ in the ambient air of the room) could be a reasonable estimate of the average δ¹³C value of the CO₂ exhaled by the human occupants. Thus, such indoor spaces appear to constitute effective “sample vessels” for collection of CO₂ that can be used to determine the average proportions of C₃ and C₄-derived C in the diets of the occupants. For the various groups occupying the rooms sampled in this study, C₄-derived C appears to have constituted ∼40% of the average diet.