Geochemical mapping of slab-derived fluid and source mantle along Japan arcs

Although slab-derived fluid significantly affects melt generation and dynamics within subduction zones, its amount and distribution are not sufficiently constrained at present. Herein, we use isotopic systematics of arc volcanic rocks, subducting materials, and intrinsic mantle components prior to metasomatism, to quantify the contribution of the slab-derived fluid that metasomatizes the overlying mantle wedge beneath the entire area of Japan arcs. Simultaneous application of several multivariate statistical analyses (clustering analysis and principal/independent component analyses) to the isotopic data set allows Japan arcs to be broadly divided into eastern and western parts at the first order. Moreover, a clear higher-order inter-arc segmentation is observed, together with some intra-arc variations that possibly correspond to the heterogeneity of incoming plates. Inter-arc segmentation is shown to be primarily controlled by the geometrical parameters of the slab and the arc (e.g., subduction of a single plate or double plates beneath either oceanic or continental crust), which results in differences between mantle wedge and slab thermal conditions. Accordingly, the Kuril and Izu arcs, which have thin arc crusts (~20 km), exhibit the lowest extent of slab-derived fluid addition (0.1 wt%) to the mantle wedge, while the NE Japan arc, with a thicker arc crust (up to 36 km), features a higher value of 0.2 wt%, although the slab thermal parameters for these three arcs are essentially the same. The Central Japan arc shows the highest extent of slab-derived fluid addition (>1.0 wt%) because of the overlapping subduction of Pacific and Philippine Sea slabs, while the SW Japan and Ryukyu arcs feature moderate values of ~0.5 wt%. Moreover, a clear exotic plume zone and spots are observed in SW Japan and the Japan Sea. In addition to the variability of slab-derived fluid composition, the intrinsic mantle composition (before slab-derived fluid–induced metasomatism) shows a clear along-arc variation that is possibly caused by a large-scale mantle flow from the continental side. Thus, slab-derived fluid addition and mantle composition variability equally contribute to inter-arc segmentation, which highlights the importance of both local and regional thermal flow structures of slab-mantle systems.     

Remelting of an Andesitic Crust as a Possible Origin for Rhyolitic Magma in Oceanic Arcs: an Example from the Izu-Bonin Arc

The Izu–Bonin volcanic arc is an excellent example ofan intra-oceanic convergent margin. A total of 1011 chemicalanalyses of 17 Quaternary volcanoes of the arc are reviewedto estimate relative proportions of magmas erupted. Basalt andbasic andesite (SiO₂ < 57 wt %) are the predominant eruptiveproducts of the Izu–Bonin arc, and rhyolite (SiO₂ >70 wt %) forms another peak in volume. Such rhyolites possesscompositions identical to those of partial melts produced bydehydration-melting of calc-alkaline andesites at low pressure(<7 kbar). Meanwhile, the major element variation of theShirahama Group Mio-Pliocene volcanic arc suite, Izu Peninsula,completely overlaps that of the Quaternary Izu–Bonin arcvolcanoes, and groundmasses of Shirahama Group calc-alkalineandesites have compositions similar to those of Izu–Boninrhyolites. Moreover, phenocryst assemblages of calc-alkalineandesites of the Shirahama Group resemble restite phase assemblagesof dehydration-melting of calc-alkaline andesite. These linesof evidence suggest that the rhyolite magmas may have been producedby dehydration-melting of calc-alkaline andesite in the upperto middle crust. If so, then the presence of large amounts ofcalc-alkaline andesite (3–5 times more abundant than therhyolites) within the oceanic arc crust would be expected, whichis consistent with a recently proposed structural model acrossthe Izu–Bonin arc. The calc-alkaline andesite magmas maybe water saturated, and would crystallize extensively and solidifywithin the crust. The model proposed here suggests that rhyoliteeruptions could be triggered by an influx of hot basalt magmafrom depth, reheating and partially melting the calc-alkalineandesite component of the crust. KEY WORDS: bimodal magmatism; calc-alkaline andesite; oceanic arcs; rhyolite     

Insights into Petrological Characteristics of the Lithosphere of Mantle Wedge beneath Arcs through Peridotite Xenoliths: a Review

The petrological characteristics of peridotite xenoliths exhumedfrom the lithospheric mantle below the Western Pacific arcs(Kamchatka, NE Japan, SW Japan, Luzon–Taiwan, New Irelandand Vanuatu) are reviewed to obtain an overview of the supra-subductionzone mantle in mature subduction systems. These data are thencompared with those for peridotite xenoliths from recent orolder arcs described in the literature (e.g. New Britain, WesternCanada to USA, Central Mexico, Patagonia, Lesser Antilles andPannonian Basin) to establish a petrological model of the lithosphericmantle beneath the arc. In currently active volcanic arcs, thedegree of partial melting recorded in the peridotites appearsto decrease away from the fore-arc towards the back-arc region.Highly depleted harzburgites, more depleted than abyssal harzburgites,occur only in the frontal arc to fore-arc region. The degreeof depletion increases again to a degree similar to that ofthe most depleted abyssal harzburgites within the back-arc extensionalregion, whether or not a back-arc basin is developed. Metasomatismis most prominent beneath the volcanic front, where the magmaproduction rate is highest; silica enrichment, involving themetasomatic formation of secondary orthopyroxene at the expenseof olivine, is important in this region because of the additionof slab-derived siliceous fluids. Some apparently primary orthopyroxenes,such as those in harzburgites from the Lesser Antilles arc,could possibly be of this secondary paragenesis but have beenrecrystallized such that the replacement texture is lost. TheTi content of hydrous minerals is relatively low in the sub-arclithospheric mantle peridotites. The K/Na ratio of the metasomatichydrous minerals decreases rearward from the fore-arc mantleas well as downward within the lithospheric mantle. The lithosphericmantle wedge peridotites, especially metasomatized ones frombelow the volcanic front, are highly oxidized. Shearing of themantle wedge is expected beneath the volcanic front, and isrepresented by fine-grained peridotite xenoliths. KEY WORDS: mantle wedge; lithospheric mantle; peridotite xenoliths; melting; metasomatism     

Volcanic arcs as archives of plate tectonic change

Processing of the oceanic lithosphere in subduction zones gives rise to arc magmatism, and strong compositional links exist between trench input and arc output. Here we address the question whether these compositional links are sufficiently strong to allow for ‘tracing’ the composition of the sedimentary and igneous oceanic crust through the chemistry of arcs. The tracing approach hinges critically on whether key characteristics of the subducted slab are transmitted to arcs. Results from forward and inverse modeling, verified by observations from modern arc settings, demonstrate that elements Sr, Pb, Nd and Hf that are associated with radiogenic isotopes may preserve chemical characteristics of the subducted slab in arc magmas. The data indicate that the much thicker igneous subducted crust dominates the recycled flux to arcs. The flux from the highly enriched, but thin sediment layer is buffered, and may be even concealed, by the concomitant contributions from igneous crust, and/or subarc mantle, despite the much better visibility of sediment components in trace element and isotope space. Arc Pb and Pb isotopes are the most promising tracers that may capture the isotopic diversity of subducted MORB-type and OIB-type crust with sufficient temporal and spatial resolution. While arc Sr is also strongly controlled by the flux from the subducted crust, arc data may allow for distinguishing among radiogenic Sr recycled from altered oceanic crust or from subducted sediment in moderately radiogenic arcs (⁸⁷Sr/⁸⁶Sr < ~ 0.7045). Co-mingling of Nd and Hf from igneous subducted crust with mantle contributions mostly hinders the isotopic identification of subducted crust through arc chemistry. However, Nd and Hf may provide complementary information about the efficiency of recycling, and recycling via subduction erosion.The tracing approach appears feasible in Cenozoic arcs where much of the original subduction context is preserved. First results from the Izu Bonin and Central American arcs show that plate tectonic events like oceanic plate formation and destruction, subduction of hotspot tracks and the closure of oceanic gateways are recorded in the chemistry of arcs. A comparative evaluation of Cenozoic global arcs may hence significantly complement the information from the modern oceanic basins, help to obtain a more complete image of the oceanic crustal composition and implicate the geochemical processes by which it formed. Possibly, the tracing approach may also be useful in ancient, inactive arcs to obtain information on the composition of oceanic crust subducted in the geological past.     

Contributions of Slab Fluid, Mantle Wedge and Crust to the Origin of Quaternary Lavas in the NE Japan Arc

Quaternary lavas from the NE Japan arc show geochemical evidenceof mixing between mantle-derived basalts and crustal melts atthe magmatic front, whereas significant crustal signals arenot detected in the rear-arc lavas. The along-arc chemical variationsin lavas from the magmatic front are attributable almost entirelyto geochemical variations in the crustal melts that were mixedwith a common mantle-derived basalt. The mantle-derived basaltshave slightly enriched Sr–Pb and depleted Nd isotopiccompositions relative to the rear-arc lavas, but the variationis less pronounced if crustal contributions are eliminated.Therefore, the source mantle compositions and slab-derived fluxesare relatively uniform, both across and along the arc. Despitethis, incompatible element concentrations are significantlyhigher in the rear-arc basalts. We examine an open-system, fluid-fluxedmelting model, assuming that depleted mid-ocean ridge basalt(MORB)-source mantle melted by the addition of fluids derivedfrom subducted oceanic crust (MORB) and sediment (SED) hybridsat mixing proportions of 7% and 3% SED in the frontal- and rear-arcsources, respectively. The results reproduce the chemical variationsfound across the NE Japan arc with the conditions: 0·2%fluid flux with degree of melting F = 3% at 2 GPa in the garnetperidotite field for the rear arc, and 0·7% fluid fluxwith F = 20% at 1 GPa in the spinel peridotite field beneaththe magmatic front. The chemical process operating in the mantlewedge requires: (1) various SED–MORB hybrid slab fluidsources; (2) variable amounts of fluid; (3) a common depletedmantle source; (4) different melting parameters to explain across-arcchemical variations. KEY WORDS: arc magma; crustal melt; depleted mantle; NE Japan; Quaternary; slab fluid     

Mantle dynamics of Western Pacific and East Asia: Insight from seismic tomography and mineral physics

Recent results of high-resolution seismic tomography and mineral physics experiments are used to study mantle dynamics of Western Pacific and East Asia. The most important processes in subduction zones are the shallow and deep slab dehydration and the convective circulation (corner flow) processes in the mantle wedge. The combination of the two processes may have caused the back-arc spreading in the Lau basin, affected the morphology of the subducting Philippine Sea slab and its seismicity under southwest Japan, and contributed to the formation of the continental rift system and intraplate volcanism in Northeast Asia, which are clearly visible in our tomographic images. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent (a) small mantle plumes, (b) upwellings associated with the slab collapsing down to the lower mantle, or (c) sub-slab dehydration associated with deep earthquakes caused by the reactivation of large faults preserved in the slab. Combining tomographic images and earthquake hypocenters with phase diagrams in the systems of peridotite + water, we proposed a petrologic model for arc volcanism. Arc magmas are caused by the dehydration reactions of hydrated slab peridotite that supply water-rich fluids to the mantle wedge and cause partial melting of the convecting mantle wedge. A large amount of fluids can be released from hydrated MORB at depths shallower than 55 km, which move upwards to hydrate the wedge corner under the fore-arc, and never drag down to the deeper mantle along the slab surface. Slab dehydration reactions at 120 km depth are the antigorite-related 5 reactions which supply water-rich fluids for forming the volcanic front. Phase A and Mg-surssasite breakdown reactions at 200 and 300 km depths below 700 °C cause the second and third arcs, respectively. Moreover, the dehydration reactions of super-hydrous phase B, phases D and E at 500–660 km depths cause the fluid transportation to the mantle boundary layer (MBL) (410–660 km depth). The stagnant slabs extend from Japan to Beijing, China for over 1000 km long, indicating that the arc–trench system covers the entire region from the Japan trench to East Asia. We propose a big mantle wedge (BMW) model herein, where hydrous plumes originating from 410 km depth cause a series of intra-continental hot regions. Fluids derived from MBL accumulated by the double-sided subduction zones, rather than the India–Asia collision and the subsequent indentation into Asia, are the major cause for the active tectonics and mantle dynamics in this broad region.     

Numerical modeling of thermal structure, circulation of H2O, and magmatism–metamorphism in subduction zones: Implications for evolution of arcs

Numerical models on thermal structure, convective flow of solid, generation and transportation of H₂O-rich fluid in subduction zones are consolidated to have a comprehensive view of the subduction zone processes: heat balance, circulation of H₂O magmatism–metamorphism, growth of arcs and continental margins. A large scale convection model with steady subduction of a cold old slab (130 Myr old) predicts rapid ( 100 Myr) cooling of subduction zones, resulting in cessation of magmatism. The model also predicts that the mantle temperature beneath arcs and continental margins is greatly affected by the effective temperature of the subducting slab, i.e., the age of the subducting slab. If subduction of a young hot slab, including ridge subduction, occurs every 60 to 120 Myr as is suggested for eastern Asia, the average temperature beneath arcs is increased by about 300 °C, which may explain the long-lasting magmatism in eastern Asia. Associated with subduction of young slabs and ridges, thermal structure and circulation of H₂O are greatly modified to cause a transition from (1) normal arc magmatism, (2) forearc mantle melting, to (3) slab melting to produce a significant amount (100 km³) of granitic melts, associated with both high-P/T and low-P/T type metamorphism. The last stage of (3) can result in formation of a granitic batholith belt and a paired metamorphic belts. Synthesis of the numerical models and observations suggest that episodic subduction of young slabs and ridges can explain heat source for generating a large amount of granitic magmas of batholiths, synchronous formation of batholith and regional metamorphic belts, and P–T conditions of the paired metamorphism. Even the high-P/T metamorphism requires an elevated geothermal structure in the forearc region, associated with ridge subduction. Although the emplacement of the batholiths and the regional metamorphic belts, and the mass balance in subduction zones are not well constrained at present, the episodic event associated with ridge subduction is thought to be essential for net growth of arcs and continental margins, as well as for the long-term heat balance in subduction zones.     

Fluid source-based modeling of melt initiation within the subduction zone mantle wedge: Implications for geochemical trends in arc lavas

The GyPSM-S (Geodynamic and Petrological Synthesis Model for Subduction) scheme couples a petrological model with a 2-D thermal and variable viscosity flow model to describe and compare fundamental processes occurring within the subduction mantle wedge, including the development of a low-viscosity channel (LVC) (Hebert et al., 2009, Earth and Planetary Science Letters, v. 278, p. 243–256). Here we supplement the basic coupled model result with more sophisticated treatments of trace element partitioning in the fluid phase and melt transport regimes. We investigate the influences of slab fluid source lithology and fluid transport mechanisms on melt geochemistry, the implications of mantle source depletion related to fluid fluxing, and potential melt migration processes. This study describes two model cases that can be compared to geochemical datasets for the Izu–Bonin intra-oceanic subduction system and the Central Costa Rican part of the Central American arc. We find that there is a progression of geochemical characteristics described in studies of cross-arc and along-arc lavas that can be approximated assuming (i) limited fluid–rock interaction within the mantle wedge and (ii) that melt migration preserves the spatial distinction among melts initiated in different areas of the wedge. Specifically, volcanic front lavas have significant contributions from shallower slab fluid sources, and rear-arc lavas have significant contributions from deeper slab fluid sources. Evidence for limited fluid–rock interaction could imply either a rapid fluid transport mechanism or a fluid-dominated trace element budget within the LVC. Although we do not include a back-arc in these models, interpretations of the results lead to several potential mechanisms to explain hydrous inputs to back-arc source regions.     

The dynamics of big mantle wedge, magma factory, and metamorphic–metasomatic factory in subduction zones

The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H₂O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.     

Wet and Dry Basalt Magma Evolution at Torishima Volcano, Izu Bonin Arc, Japan: the Possible Role of Phengite in the Downgoing Slab

The arc-front volcanoes of Sumisu (31·5°N, 140°E)and Torishima (30·5°N, 140·3°E) in thecentral Izu–Bonin arc are similar in size and rise asrelatively isolated edifices from the seafloor. Together theyprovide valuable along-arc information about magma generationprocesses. The volcanoes have erupted low-K basalts originatingfrom both wet and dry parental basaltic magmas (low-Zr basaltsand high-Zr basalts, respectively). Based on models involvingfluid-immobile incompatible element ratios (La/Sm), the parentalbasalts appear to result from different degrees of partial meltingof the same source mantle (20% and 10% for wet and dry basaltmagmas, respectively). Assuming that the wet basalts containgreater abundances of slab-derived components than their drycounterparts, geochemical comparison of these two basalt typespermits the identification of the specific elements involvedin fluid transport from the subducting slab. Using an extensiveset of new geochemical data from Torishima, where the top ofthe downgoing slab is about 100 km deep, we find that Cs, Pb,and Sr are variably enriched in the low-Zr basalts, which cannotbe accounted for by fractional crystallization or by differencesin the degree of mantle melting. These elements are interpretedto be selectively concentrated in slab-derived metasomatic fluids.Variations in K, high field strength element and rare earthelement concentrations are readily explained by variations inthe degree of melting between the low- and high-Zr basalts;these elements are not contained in the slab-derived fluids.Rb and Ba exhibit variable behaviour in the low-Zr basalts,ranging from immobile, similar to K, to mildly enriched in somelow-Zr basalts. We suggest that the K-rich mica, phengite, playsan important role in determining the composition of fluids releasedfrom the downgoing slab. In arc-front settings, where slab depthis 100 km, phengite is stable, and the fluids released fromthe slab contain little K. In back-arc settings, however, wherethe slab is at 100–140 km depth, phengite is unstable,and K-rich fluids are released. We conclude that cross-arc variationsin the K content of arc basalts are probably related to differingcompositions of released fluids or melts rather than the widelyheld view that such variations are controlled by the degreeof partial melting. KEY WORDS: arc volcano; degrees of melting; mantle wedge; water; wet and dry basalts     

Comparison of gravity anomaly between mature and immature intra-oceanic subduction zones in the western Pacific

The western Pacific hosts major subduction systems such as Izu–Bonin–Mariana and Tonga–Kermadec, but also less conspicuous systems such as Yap, Mussau and Hjort trenches which constitute the young, incomplete, or ultraslow-member in the evolutionary spectrum of subduction zones. We used satellite-derived gravity data to compare well-developed and immature subduction systems. It is shown that at spatial resolution > 10–20 km or so, the satellite data have accuracy comparable to ship-board gravity measurements over intra-oceanic subduction zones. In the isostatic residual gravity anomaly map, the width of non-isostatically-compensated region of the mature subduction zones is much wider than that of immature ones. More importantly, when the gravitational attraction due to seafloor is removed, a large difference exists between the mature and immature subduction zones in the overriding plate side. Mature subduction zones exhibit broad low gravity anomalies of ~ 200–250 mGal centered at distances of 150–200 km from the trench which are not found over immature subduction zones. The cause of the broad low gravity anomalies over mature subduction zones is debatable due to lack of information on the deep crust and upper mantle structure and property. We discuss the following four causes: (1) serpentinization of the upper mantle beneath the forearc; (2) presence of partial melt in the mantle wedge caused by release of volatiles from the slab, frictional heating and distributed by mantle circulation; (3) difference in density structure between the overriding and subducting plates caused by difference in age and thermal structures with and without compositional stratification between crust and mantle; and (4) anomalous thickness of the arc not explained by isostasy. Our analysis suggests that serpentinization cannot explain the observed gravity anomaly which appears ~ 150–200 km from the trench. Although the extent and distribution of partial melt within the mantle wedge remain in question, to our best estimate, partial melting contributes little (< 50 mGal) to the total negative gravity anomaly. The difference in density structure reflecting temperature difference can only explain less than half of the low gravity anomaly. The sinking of lighter crustal material produces a large negative anomaly in the forearc but its location does not match the observed gravity anomaly. It appears that one cannot explain the total difference in gravity anomaly without invoking anomalous thickness of the arc. Although we could not identify the sole or combination of factors that give rise to the low gravity anomaly in mature subduction zones, the comparison of gravity anomalies between mature and immature subduction zones is likely to provide an important constraint for understanding the evolution and structure of subduction zones as more complementary evidences become available.     

Role of tonalite-trodhjemite-granite (TTG) crust subduction on the mechanism of supercontinent breakup

The tonalite-trondhjemite-granite (TTG) crust has been considered to be buoyant and hence impossible to be subducted into the deep mantle. However, recent studies on the juvenile arc in the western Pacific region indicate that immature island arcs subduct into the deep mantle in most cases, except in the case of parallel arc collision. Moreover, sediment trapped subduction and tectonic erosion are also common. This has important implications in evaluating the role of TTG crust in the deep mantle and probably on the bottom of the mantle. Because the TTG crust is enriched in K, U and Th, ca. 20 times more than that of CI chondrite, the accumulated TTG on the Core Mantle Boundary (CMB) would have played a critical role to initiate plumes or superplumes radiating from the thermal boundary layer, particularly after 2.0 Ga, related to the origin of superplume-supercontinent cycle. This is because selective subduction of oceanic lithosphere including sediment-trapped subduction, tectonic erosion and arc- and microcontinent-subduction proceeded under the supercontinent before the final amalgamation ca. 200-300 million years after the formation of the nuclei. We speculate the mechanism of superplume evolution through the subduction of TTG-crust and propose that this process might have played a dominant role in supercontinent breakup.     

Two contrasting magmatic types coexist after the cessation of back-arc spreading

Amongst island arcs, Izu–Bonin is remarkable as it has widespread, voluminous and long-lived volcanism behind the volcanic front. In the central part of the arc this volcanism is represented by a series of seamount chains which extend nearly 300 km into the back-arc from the volcanic front. These back-arc seamount chains were active between 17 and 3 Ma, which is the period between the cessation of spreading in the Shikoku Basin and the initiation of currently active rifting just behind the Quaternary volcanic front. In this paper we present new age, chemical and isotopic data from the hitherto unexplored seamounts which formed furthest from the active volcanic front. Some of the samples come from volcanoes at the western limit of the back-arc seamount chains. Others are collected from seamounts of various sizes which lie on the Shikoku Basin crust (East Shikoku Basin seamounts). The westernmost magmatism we have sampled is manifested as a series of volcanic edifices that trace the extinct spreading centre of the Shikoku Basin known as the Kinan Seamount Chain (KSC).Chemically, enrichment in fluid-mobile elements and depletion in HFSE relative to MORB indicates that the back-arc seamount chains and the East Shikoku Basin seamounts have a significant contribution of slab-derived material. In this context these volcanoes can be regarded as a manifestation of arc magmatism and distinct from the MORB-like lavas of the Shikoku back-arc basin. ⁴⁰Ar/³⁹Ar ages range from 15.7 to 9.6 Ma for the East Shikoku Basin seamounts, indicating this arc magmatism started immediately after the Shikoku Basin stopped spreading.Although the KSC volcanoes are found to be contemporaneous with the seamount chains and East Shikoku Basin seamounts, their chemical characteristics are very different. Unlike the calc-alkaline seamount chains, the KSC lavas range from medium-K to shoshonitic alkaline basalt. Their trace element characteristics indicate the absence of a subduction influence and their radiogenic isotope systematics reflect a mantle source combining a Philippine Sea MORB composition and an enriched mantle component (EM-1). One of the most remarkable features of the KSC is that their geochemistry has a distinct temporal variation. Element ratios such as Nb/Zr and concentrations of incompatible elements such as K₂O increase with decreasing age and reach a maximum at ca. 7 Ma when the KSC ceased activity.Based on the chemical and temporal information from all the data across the back-arc region, we have identified two contrasting yet contemporaneous magmatic provinces. These share a tectonic platform, but have separate magmatic roots; one stemming from subduction flux and the other from post-spreading asthenospheric melting.     

岛弧火山岩成因和地球化学特征

岛弧火山岩主要为俯冲带的俯冲板片脱水形成的富大离子亲石元素流体交代地幔楔,并使其发生部分熔融,产生岛弧岩浆作用而形成的,岩石组合通常为玄武岩—安山岩—英安岩—流纹岩及相应侵入岩组合。它以Al2O3、K2O高,低Ti O2,且K2ONa2O为特征,相对富集LILE,亏损HFSE,特别是Ti、Nb、Ta等。本文主要从岛弧岩浆作用的起因着手,分析流体和熔体对地幔楔的交代作用,以及岛弧岩浆作用过程,进而分析岛弧火山岩的地球化学特征。     

勘察加岛弧岩浆岩研究进展

西太平洋分布了全球大部分的洋内俯冲带,也是全球沟-弧-盆体系最发育的地区。勘察加(Kamchatka)半岛位于俄罗斯远东地区,地处太平洋西北部(51°~60°N、155°~164°E),是全球环太平洋岛弧的重要组成部分。前人对勘察加岛弧岩石地幔源区性质、熔融过程、岩浆结晶分异及熔/流体交代过程进行了详细的研究,并获得了丰硕的成果。最新的研究进展表明:(1)勘察加岛弧前缘火山和中部火山的源区主要为亏损地幔,而弧后区域则存在较为富集的地幔贡献;(2)勘察加岛弧不同区域的地幔源区流体性质具有一定的差异,导致从前缘火山至中部火山,地幔熔融程度逐渐降低;(3)勘察加岛弧不同区域岩石地球化学成分存在差异,而且,沿穿弧剖面某些元素或同位素(如δ11 B)表现出系统变化的特征,反应了俯冲板片流体通量和流体性质的差异;(4)勘察加半岛部分多期次火山(如Klyuchevskoy火山)地球化学成分复杂,可能反应了源区熔融条件的不同和岩浆结晶分异过程;(5)勘察加岛弧北部与阿留申岛弧近直角相交,导致异常的构造背景,促使该区域形成了具有埃达克质特征的岛弧岩浆。     

Os, Nd, and Sr isotopic and chemical compositions of ultramafic xenoliths from Kurose, SW Japan: Implications for contribution of slab-derived material to wedge mantle

We examined seven ultramafic xenoliths from 1~3 Ma alkali olivine basalt reefs near the Eurasian continent and one sample of the host alkali basalt to identify the mantle wedge material and to constrain the origin and evolution of mantle beneath SW Japan. Six xenoliths are from Kurose and one xenolith is from Takashima, northern part of the Kyushu islands, SW Japan. The Sr and Nd isotopic ratios vary from 0.70416 to 0.70773 and from 0.51228 to 0.51283, respectively. The Kurose and Takashima xenoliths have higher Sr isotopic ratios and lower Nd isotopic ratios than those of the peridotite xenoliths from the other arc settings such as Simcoe and NE Japan.

The Kurose xenoliths have less radiogenic Os isotopic ratios (¹⁸⁷Os/¹⁸⁸Os = 0.123–0.129) than the primitive upper mantle (PUM) estimate and limited variation compared to the other arc xenoliths. Their Os isotope compositions are rather similar to the ultramafic xenoliths from NE and east China. In addition, the samples of the Kurose and Takashima xenoliths plot along a mixing line between ultramafic xenoliths from SE and NE China and a slab component in Sr–Nd–Os isotopic space. Our results suggest that fragments of continental lithospheric mantle from the China craton may exist beneath Kurose and Takashima after the Sea of Japan expansion when the Japanese islands were rifted away from the Eurasian continent during Miocene. Later magmatism due to subduction of the Philippine Sea Plate beneath the SW Japan arc around 15 Ma ago may have introduced fluids or melts derived from slab component, interpreted to be oceanic sediments rather than altered oceanic crust, that possibly modified the original composition of the lithospheric mantle sampled by the peridotite xenoliths from Kurose and Takashima.     

Laboratory measurement of P-wave velocity in crustal and upper mantle xenoliths from Ichino-megata, NE Japan: ultrabasic hydrous lower crust beneath the NE Honshu arc

Ultrasonic laboratory measurements of P-wave velocity (Vp) were carried out up to 1.0 GPa in a temperature range of 25–400 °C for crustal and mantle xenoliths of Ichino-megata, northeast Japan. The rocks used in the present study cover a nearly entire range of lithological variation of the Ichino-megata xenoliths and are considered as representative rock samples of the lower crust and upper mantle of the back arc side of the northeast (NE) Honshu arc. The Vp values measured at 25 °C and 1.0 GPa are 6.7–7.2 km/s for the hornblende gabbros (38.6–46.9 wt.% SiO₂), 7.2 km/s for the hornblende-pyroxene gabbro (43.8 wt.% SiO₂), 6.9–7.3 km/s for the amphibolites (36.1–44.3 wt.% SiO₂), 8.0–8.1 km/s for the spinel lherzolites (46.2–47.2 wt.% SiO₂) and 6.30 km/s for the biotite granite (72.1 wt.% SiO₂). Combining the present data with the Vp profile of the NE Honshu arc [Iwasaki, T., Kato, W., Moriya, T., Hasemi, A., Umino, N., Okada, T., Miyashita, K., Mizogami, T., Takeda, T., Sekine, S., Matsushima, T., Tashiro, K., Miyamachi, H. 2001. Extensional structure in northern Honshu Arc as inferred from seismic refraction/wide-angle reflection profiling. Geophys. Res. Lett. 28 (12), 2329–2332], we infer that the 15 km thick lower crust of the NE Honshu arc is composed of amphibolite and/or hornblende (±pyroxene) gabbro with ultrabasic composition. The present study suggests that the Vp range of the lower crustal layer (6.6–7.0 km/s) in the NE Honshu arc, which is significantly lower than that obtained from various seismic measurements (e.g. the northern Izu-Bonin-Mariana arc: 7.1–7.3 km/s), is due to the thick hydrous lower crustal layer where hornblende, plagioclase and magnetite are dominant.     

Boninites as windows into trace element mobility in subduction zones

Boninites are subduction-related rocks originating from re-melting of highly depleted mantle sources left after extraction of tholeiitic melts. Due to their depleted nature, the incompatible trace element inventory of boninites is virtually entirely inherited from slab components without a significant contribution from the refractory mantle wedge. Thus, boninites constitute an excellent window into processes controlling trace element mobilization at the slab-mantle wedge interface. In order to constrain the behaviour of trace elements in subduction zones with a special emphasis on high field strength elements, we analyzed low-Ca boninites and associated tholeiitic basalts from Cape Vogel, Papua New Guinea (PNG) and compare them with compositions of high-Ca boninites and associated tholeiitic basalts from Cyprus. High-precision HFSE (Nb, Ta, Zr, Hf, W) concentration data of the boninites and associated tholeiitic basalts were obtained by isotope dilution. Major, trace element, and Sr-Nd-Hf-Pb isotope compositions clearly document a significant contribution of slab-derived melts involved in the petrogenesis of the PNG boninites, whereas only fluid-like subduction components were involved in the petrogenesis of the PNG basalts and the Cyprus suite. Low-Ca boninites from PNG are derived from a more refractory mantle source (∼21% depletion) than the high-Ca boninites from Cyprus (∼11% depletion) and their respective tholeiitic precursors (<10% depletion). In agreement with the more depleted nature of their mantle source, boninites exhibit a significantly stronger overprint by slab components. High-precision HFSE data indicate that, in comparison to LILE, a somewhat lower but measurable mobilization of all investigated HFSE in both slab-derived fluids and melts is evident. Modelling calculations demonstrate that the subduction components dominate the LILE budget and also largely control LREE and HFSE abundances in the boninite sources. Notably, the increasing influence of slab-derived fluids results in a decrease of the negative Nb-Ta anomaly, most likely reflecting a similar mobility of Nb-Ta and LREE at higher pressures near the critical point of fluid-melt miscibility. Ratios of Zr/Hf and Nb/Ta in the melt-like slab components dominating in the sources of the PNG boninites were probably fractionated in equilibrium with garnet-amphibolitic mafic oceanic crust. HFSE ratios in the Cyprus boninites are best explained by dehydration of subducted pelagic sediments in the absence of Ti-rich phases such as rutile. Our results also confirm previous assertions that the mobility of HFSE decreases in the order Sb > W-Mo > Nb-Ta > Zr-Hf. Furthermore, Mo-W systematics may provide a potential novel tracer for the amount, composition and redox state of subducted pelagic sediments that contribute to the geochemical budget of intra-oceanic arc systems.     

Tectonic complexities in the bonin arc system

The Bonin arc system is anomalous in that it does not appear to fit the tectonic pattern observed in most arc systems. Re-examination of this arc system, with a new bathymetric chart and against a background of recent studies in other arcs, leads to reasonable explanations for its anomalous characteristics. The frontal-arc volcanics on the Bonin Islands, which now form part of the trench slope break, can best be explained by the northward rifting of the Bonin Islands block from a position along the frontal arc under the influence of oblique subduction. The very large positive gravity anomaly over the islands results from the greater than normal density and volume of the volcanics compared to most trench slope breaks. The dominant northeast—southwest ridge and trough topography, into which the Iwo Jima Ridge (frontal arc) is broken may have resulted from compressions of the arc along its trend. This compression would be attributed to the southward movement of Japan as the Yamato Basin of the Sea of Japan opened in the Late Oligocene and Early Miocene. Recent extension is occurring in the Bonin arc system, as earlier suggested, but in an east—west direction. Features associated with extension can best be identified at the south end of the arc, but may persist for its entire length. This extension is either more rapid, or began first at the south end.     

Constraints from Thorium/Lanthanum on Sediment Recycling at Subduction Zones and the Evolution of the Continents

Arc magmas and the continental crust share many chemical features,but a major question remains as to whether these features arecreated by subduction or are recycled from subducting sediment.This question is explored here using Th/La, which is low inoceanic basalts (<0·2), elevated in the continents(>0·25) and varies in arc basalts and marine sediments(0·09–0·34). Volcanic arcs form linear mixingarrays between mantle and sediment in plots of Th/La vs Sm/La.The mantle end-member for different arcs varies between highlydepleted and enriched compositions. The sedimentary end-memberis typically the same as local trench sediment. Thus, arc magmasinherit their Th/La from subducting sediment and high Th/Lais not newly created during subduction (or by intraplate, adakiteor Archaean magmatism). Instead, there is a large fractionationin Th/La within the continental crust, caused by the preferentialpartitioning of La over Th in mafic and accessory minerals.These observations suggest a mechanism of ‘fractionation& foundering’, whereby continents differentiate intoa granitic upper crust and restite-cumulate lower crust, whichperiodically founders into the mantle. The bulk continentalcrust can reach its current elevated Th/La if arc crust differentiatesand loses 25–60% of its mafic residues to foundering. KEY WORDS: arc magmatism; continental crust; delamination; thorium; sediment subduction