Inconsistent palaeomagnetic recording of the Blake event in Chinese loess related to sedimentary environment

Three loess sequences located east of the Liupan mountain region, China, were studied to obtain records of the Blake polarity event. Palaeomagnetic records from the appropriate stratigraphic interval of these three sequences, however, record the Blake event poorly in one case and not at all in the other two cases. It is important to understand why these loess sequences miss the Blake event, whereas others record it quite well. We conclude that regional variations in the sedimentary environment over the Chinese loess plateau are responsible for the inconsistent recording of the Blake event. The palaeomagnetic records suggest a threefold subdivision of the Chinese loess plateau into (1) the central and southern portions of the part of the plateau that lies east of the Liupan Mountains, where the primary record of the Blake event has been severely smoothed or wiped out by pedogenic processes during palaeosol (S1) formation; (2) the northern margin of the loess plateau to the east of the Liupan Mountains, where frequent, severe dust storms have resulted in discontinuous records with a high probability of missing the Blake event; and (3) the region west of the Liupan Mountains, where loess sequences are deposited rapidly and nearly continuously with only minor pedogenesis, and are thus capable of recording short events like the Blake.     

Evidence for the Blake event in volcanic rocks from Lipari (Aeolian Archipelago)

Palaeomagnetic and geochronological measurements have been carried out on the late Pleistocene basaltic–andesitic unit of Monte Chirica–Costa Rasa, on the island of Lipari (Aeolian Archipelago). The lava flow sequence is about 10  m thick and has been sampled in detail. Magnetic properties are rather uniform; Curie temperatures of 540° to 580 °C, and the saturation IRM reached at applied values of 0.1  T point to titanomagnetite as the main magnetization carrier. Thermal and AF demagnetization have shown the presence of secondary magnetization components. These were removed mostly at 450°–500 °C or 20–30  mT, indicating a highly stable ChRM with directions from transitional to reverse. Where a ChRM could not be isolated by application of the demagnetization techniques, the converging remagnetization circles method gave a mean ChRM value fully comparable with that obtained from other methods. ⁴⁰Ar/³⁹Ar determinations were performed on two lava flows, in the lower and upper parts of the sequence. The former shows a transitional ChRM direction and a whole-rock age of 157±12  ka, the latter a reverse direction, a whole-rock age of 143±17  ka and a ground-mass age of 128±23  ka. The radiometric data and the reconstructed stratigraphy, which indicate ages of 150±10  ka and 104±3.5  ka, respectively, for the volcanic units at the bottom and top of the Monte Chirica–Costa Rasa unit, suggest that the reverse directions recorded in Lipari are related to the Blake event.     

Palaeomagnetism of Lower Cambrian sediments from the Olenek River section (northern Siberia): palaeopoles and the problem of magnetic polarity in the Early Cambrian

New palaeomagnetic data from the Lower and Middle Cambrian sedimentary rocks of northern Siberia are presented. During stepwise thermal demagnetization the stable characteristic remanence (ChRM) directions have been isolated for three Cambrian formations. Both polarities have been observed, and mean ChRM directions (for normal polarity) are: Kessyusa Formation (Lower Cambrian) D = 145°, I = -40°, N = 12, α₉₅= 12.8°; pole position: φ= 38°S, A = 165°E; Erkeket Formation (Lower Cambrian, stratigraphically highly) D = 152°, I = - 47°, N = 23, α₉₅= 6.8°; pole position: φ= 45°S, A = 159°E; Yunkyulyabit-Yuryakh Formation (Middle Cambrian) D = 166°, I = - 33°, N = 38, α₉₅= 4.6°; pole position: φ= 36°S, L = 140°E. These poles are in good agreement with the apparent polar wander path based on the bulk of existing Cambrian palaeomagnetic data from the Siberian platform. In Cambrian times, the Siberian platform probably occupied southerly latitudes stretching from about 35° to 0°, and was oriented 'reversely' with respect to its present position. Siberia moved northwards during the Cambrian by about 10° of latitude. This movement was accompanied by anticlockwise rotation of about 30°. The magnetostratigraphic results show the predominance of reversed polarity in the Early Cambrian and an approximately equal occurrence of both polarities in the part of the Middle Cambrian studied. These results are in good agreement with the palaeomagnetic polarity timescale for the Cambrian of the Siberian platform constructed previously by Khramov et al. (1987).     

Palaeomagnetic directions (223-1.4 ka) recorded in the volcanites of Lipari, Aeolian Islands

b
The island of Lipari is formed by Pleistocene volcanites emplaced during four main periods of volcanic activity. A study has been made of their magnetic properties, primarily with the aim of determining changes in the palaeomagnetic directions. Titanomagnetite is always the primary ferromagnetic mineral and its magnetic characteristics are common to the various lithotypes. However, the concentration of titanomagnetite and the degree of magnetic anisotropy vary systematically and correlate with the types of magma (basalt-andesite in the first and second volcanic periods; rhyolite in the third and fourth periods). All palaeomagnetic directions are of normal polarity (Brunhes epoch). Their mean overall palaeomagnetic pole (86N, 238E; dp = 5, dm = 6) is statistically indistinguishable from the geographic pole.
The variations in declination and inclination with age, however, are marked by some evidence of a discontinuity between 150 ± 10 and 127 ± 8 ka. This age can be correlated with the beginning of the Blake event of reverse polarity. The discontinuity might therefore correspond to magnetic excursions which occurred immediately before.     

The detection of single-domain greigite (Fe3S4) using rotational remanent magnetization (RRM) and the effective gyro field (Bg): mineral magnetic and palaeomagnetic applications

The intensity of rotational remanent magnetization (RRM) acquired by single-domain greigite at a rotation frequency of 5 rps was combined with measurements of anhysteretic remanent magnetization (ARM) to calculate the effective biasing field ( Bg ) that produced the RRM. Samples of single-domain greigite had Bg values between -137 and -84 μT, and a MDF_RRM of c. 80 mT. By contrast, a suite of natural and synthetic ferrimagnetic iron oxide samples, including single-domain magnetite and y Fe₃O₄ tape particles, acquired Bg values between -3 and -14 μT, and MDF_RRM ranged between 43 and 68 mT (when RRM was acquired). Multidomain magnetite did not acquire a RRM. Bg values at 5 rps were calculated from previously published data for magnetite particles of different grain sizes, which revealed a minimum Bg value of -24 μT and a MDF_RRM of 57 mT for the finest fraction (0.2-0.8 μm in diameter). In a geological example, measurements of Bg and MDF_RRM were used to detect the presence of greigite in a 4 m long Late Weichselian sediment core. Variations in inclination, declination and the intensity of the natural remanent magnetization (NRM) correlate with changes in magnetic mineralogy.     

The rock magnetic signal of climate change in the maar lake sequence of Lac St Front (France)

Rock magnetic properties of the maar lake sediments of Lac St Front (Massif Central, France) reflect environmental changes during the last climatic cycle. High magnetic concentrations are measured in the sediments deposited under glacial climatic conditions, while lower concentrations correspond with more temperate climatic periods. Low- and high-temperature measurements indicate that the remanence is carried by (titanium-poor) magnetite. However, some maghemite and haematite is present in sediments deposited under temperate conditions.
Normalized intensities and coercivities of the anhysteretic remanent magnetization (ARM) are clearly higher for the sediments deposited during the temperate climatic periods of the Eemian, St Germain I, II and Mid-glacial than for glacial sediments, but other magnetic parameters hardly differ between these groups. Due to slight differences in magnetic composition and possible effects of grain interactions, it is not straightforward to relate this different ARM behaviour to magnetic grain-size variations. For the Holocene sediments, rock magnetic parameters indicate a larger grain size. This trend is also suggested by granulometric experiments with an optical laser granulometer. Dissolution of smaller grains is the most likely explanation for this larger grain size.
Changes in magnetic composition and grain size are extremely limited for the glacial sediments, but magnetic concentration varies considerably. Magnetic concentration maxima in the glacial sediments of Lac St Front correlate with those of the nearby Lac du Bouchet (Thouveny et al. 1994). Correlating the susceptibility records of these sequences with the δ¹⁸O record of the GRIP ice cores (Thouveny et al. 1994) suggests that magnetic concentration maxima may correspond with short cold climatic episodes, associated with Heinrich events.     

A major seismogenic fault in a 'silent area': the Castrovillari fault (southern Apennines, Italy)

Large historical earthquakes in Italy define a prominent gap in the Pollino region of the southern Apennines. Geomorphic and palaeoseismological investigations in this region show that the Castrovillari fault (CF) is a major seismogenic source that could potentially fill the southern part of this gap. The surface expression of the CF is a complex, 10–13 km long set of prominent scarps. Trenches across one scarp indicate that at least four surface-faulting earthquakes have occurred along the CF since Late Pleistocene time, each producing at least 1 m of vertical displacement. The length of the fault and the slip per event suggest M =6.5-7.0 for the palaeoearthquakes. Preliminary radiocarbon dating coupled with historical considerations imply that the most recent of these earthquakes occurred between 380 BC and 1200 AD, and probably soon after 760 AD; no evidence for this event has been found in the historical record. We estimate a minimum recurrence interval of 1170 years and a vertical slip rate of 0.2-0.5 mm yr^-1 for the CF, which indicates that the seismic behaviour of this fault is comparable to other major seismogenic faults of the central-southern Apennines. The lack of mention or the mislocation of the most recent event in the historical seismic memory of the Pollino region clearly shows that even in Italy, which has one of the longest historical records of seismicity, a seismic hazard assessment based solely on the historical record may not be completely reliable, and shows that geological investigations are critical for filling possible information gaps.     

3-D seismic velocities calculated from lattice-preferred orientation and reflectivity of a lower crustal section: examples of the Val Sesia section (Ivrea zone, northern Italy)

To quantify the seismic properties of lower crustal rocks and to better constrain the origin of the lower crustal seismic reflectivity, we determined the complete 3-D seismic properties of a lower crustal section. Eight representative samples of the main lithologic and structural units outcropping in the Val Sesia (Ivrea zone) were studied in detail. The seismic velocities were calculated using the single crystal stiffness coefficients and the lattice preferred orientation (LPO) of each mineral in all samples. The 21 stiffness coefficients characterizing the elastic behaviour of each rock are determined. Mafic and ultramafic rocks such as pyroxenite and pyroxene-bearing gabbros display complex shear wave properties. These rocks are weakly birefringent (maximum 0.1 kms⁻¹) and it is difficult to find consistent relationships between the seismic properties and the rock structure. On the other hand, seismic properties of deformed felsic rocks are essentially controlled by mica. They display strong S -wave birefringence (0.3 km s⁻¹) and relatively high V _p anisotropy (7.6 per cent). Amphibole also strongly influences the rock birefringence patterns. For both kind of rocks, the foliation is highly birefringent and the fast polarized shear wave is systematically oriented parallel to the foliation. We show that the number of mineral phases in the rock strongly controls the anisotropy. The seismic anisotropy has a complex role in the P -wave reflectivity. Compared to the isotropic case, anisotropy enhances the reflection coefficient for about 60 per cent of the possible lithological interfaces. For 40 per cent of the interfaces, the reflection coefficient is much lower when one considers the medium as anisotropic.     

Artificial Neural Networks in Proglacial Discharge Simulation: Application and Efficiency Analysis in Comparison to the Multivariate Regression; A Case Study of Waldemar River (Svalbard)

Artificial neural networks were applied to simulate runoff from the glacierized part of the Waldemar River catchment (Svalbard) based on hydrometeorological data collected in the summer seasons of 2010, 2011 and 2012. Continuous discharge monitoring was performed at about 1 km from the glacier snout, in the place where the river leaves the marginal zone. Averaged daily values of discharge and selected meteorological variables in a number of combinations were used to create several models based on the feed‐forward multilayer perceptron architecture. Due to specific conditions of melt water storing and releasing, two groups of models were established: the first is based on meteorological inputs only, while second includes the preceding day's mean discharge. Analysis of the multilayer perceptron simulation performance was done in comparison to the other black‐box model type, a multivariate regression method based on the following efficiency criteria: coefficient of determination (R²) and its adjusted form (adj. R²), weighted coefficient of determination (wR²), Nash–Sutcliffe coefficient of efficiency, mean absolute error, and error analysis. Moreover, the predictors' importance analysis for both multilayer perceptron and multivariate regression models was done. The performed study showed that the nonlinear estimation realized by the multilayer perceptron gives more accurate results than the multivariate regression approach in both groups of models.     

Accordant summit heights, summit levels and the origin of the “upper denudation level” in the Serra do Mar (SE-Brazil, São Paulo): A study of hillslope forms and processes

In southern São Paulo the Serra do Mar is characterized by three distinct terrain types: 1) highly dissected areas with closely spaced ridges and accordant summit heights; 2) multiconvex hills; and 3) terrains with highly elevated watershed areas, irregular summit heights, and locally subdued relief. The development of this landscape is considered to be the result of the Cenozoic block-faulting and of the influences that are exerted by the differing lithological and structural setting of block-faulted compartments on weathering and erosion processes.In areas characterized by pronounced accordant summits the close coincidence between hillslope angle and the angle of limiting stability against landsliding points to a close adjustment of hillslope gradients and the mechanical properties of the regolith. The relative height of the hillslopes is functionally related to the spacing of the valleys and the gradient of the hillslopes. In areas with a regular spacing of v-shaped valleys and uniform rocks, this leads to the intersection of valley-side slopes in summits and ridges at a certain elevation. This elevation is determined by the length and steepness of the valley-side slopes. Therefore, the heights of the summits are geometrically constrained and are likely to indicate the upper limit of summit heights or an “upper denudation level” that is adjusted by hillslope processes to the incising streams. Accordant summit heights of this type are poor indicators of formerly more extensive denudation surfaces as it is also likely that they are a result of the long-term adjustment of hillslopes to river incision.The steep mountain flanks of block-faulted compartments on the other hand, comprise regolith-covered hillslopes that are closely adjusted to the maximum stable gradient as well as rock-slopes that are controlled by the rock-mass strength. Their summits are usually not accommodated into uniform summit levels. Highly elevated watershed areas exhibiting a subdued relief are detached from the base level response. On granitoid rocks these areas are often characterized by the rocky hills and domal rock outcrops. However, differences in the elevation of interfluves and summits between rocks of differing resistance and in the elevation of lithologically distinct individual fault-blocks imply that long-term weathering and erosion has transformed and lowered these landscapes. Therefore, these areas cannot be interpreted as a remnant of a pre-uplift topography and it appears to be unlikely that the height of the summits correlates with formerly more widespread planation surfaces in the far hinterland.The studies indicate that concepts such as the parallel retreat of hillslopes cannot account for the observed differences in the landscape. It is suggested that the Serra do Mar is consumed from the Atlantic and the inland side by spatially non-uniform developmental states. These states are determined by local differences in the coupling and distance to the regional base level and sea-level or are due to lithological and structural controls between and within the block-faulted compartments.