首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 468 毫秒
1.
渝东南及周边地区下寒武统黑色岩系稀土总量略低于北美页岩,∑LREE/∑HREE值为1.99~9.01,平均6.86,轻稀土相对富集;δEu值为0.69~7.33,平均2.79;δCe值为0.70~1.01,平均0.85。区内下寒武统黑色岩系为正常海水与热水沉积作用的混合产物,形成于缺氧还原环境逐渐向弱氧化环境过渡的外陆架。  相似文献   

2.
为了深入探讨黔南地区早石炭世黑色岩系沉积-构造环境,笔者对页岩气钻孔CY1井打屋坝组黑色岩系进行了详细采样测试,并重点分析了页岩稀土元素地球化学特征。分析结果表明,该区早石炭世页岩稀土元素总量(ΣREE)为(213.08~308.1)×10-6,平均值为251.43×10-6,大于北美页岩的平均值(173.21×10-6);w(ΣLREE)/w(ΣHREE)及w(Ce)N/w(Yb)N等地球化学参数表明,轻、重稀土元素分异明显;REE分布模式呈平坦状,表现出轻稀土富集、重稀土元素亏损;δEu值为0.53~0.671,显示中等程度的负Eu异常,Ce异常表现不明显。根据δCe和Ce异常值的变化,反映研究区早石炭世为缺氧还原环境。根据稀土元素组合特征、δEu值的变化及w(La)N/w(Yb)N-ΣREE的图解特征,结合区域地质背景,认为黔南地区打屋坝组黑色页岩的物源来自黔中隆起和雪峰山隆起,母岩为沉积岩和花岗岩的混合,沉积区构造环境为被动大陆边缘构造背景。  相似文献   

3.
地区广泛发育有下寒武统。利用ICP-MS方法系统分析重庆城口地区下寒武统黑色岩系中多金属富集层、炭质粉砂岩以及硅质岩样品的微量元素、稀土元素组成。研究结果表明稀土总量为111.41×10-6~184.13×10-6,平均为138.83×10-6,相对其他地区黑色岩系较低;LREE/HREE=2.49~3.44,LREE相对富集,HREE亏损;δCe=0.39~0.46,Ce呈明显负异常;δEu=0.84~1.10,Eu异常不明显。δCe,δU,V/Cr,Ni/Cr,V/(V+Ni)表明该区黑色岩系形成于缺氧环境;稀土元素地球化学特征及其相关图解、Cr,Sb,As,Bi的富集以及U/Th等反映本区黑色岩系非正常海水沉积产物,明显受热水沉积的影响,同时还存在火山活动的影响,火山活动可能为热水活动提供了动力及物质成分。  相似文献   

4.
针对渝东南及周边早寒武世黑色岩系属中国南方震旦纪之后大规模海侵产物的岩石地球化学研究结果表明:其黑色岩系的岩石地层单位由下至上涉及牛蹄塘组、明心寺—金顶山组及清虚洞组;其特征显示:K2O,Al2O3含量相对较高,MnO含量相对较低;B含量中等,分异性不强;Ba较为富集;Co,Ni,Zn亏损较大,由底至顶三者含量均有增加趋势;稀土总量不富集,轻稀土相对富集;由底至顶δEu表现为不明显的负异常,到明显的正异常,再到负异常;δCe绝大多数表现为不明显的负异常。岩石地球化学特征参数及相关图解表明,区内早寒武世黑色岩系形成于由缺氧还原状态逐步过渡至弱氧化状态条件下,浅海中水体稍深的外陆架环境,为正常海水与热水沉积作用的混合产物,热水主要来自于循环的热的海水。  相似文献   

5.
吴育平 《地质与勘探》2021,57(5):1065-1076
为深入探讨湘西地区下寒武统牛蹄塘组黑色岩系沉积-构造环境,对三岔剖面黑色岩系进行了详细采样测试,并重点分析了主量、微量及稀土元素地球化学特征。研究结果表明,牛蹄塘组黑色岩系不仅有机碳含量高,而且相比于北美页岩更富集V、Ni、Cr等微量元素。δ~(13)C_(org)及微量元素判别指标V/(V+Ni)、V/Cr、Ni/Co、δU、Ce/La、Ce_(anom)等特征的变化均反映牛蹄塘组沉积期水体属缺氧还原的浅水环境,且Mo/TOC与U_(EF)-Mo_(EF)协同模式表明沉积区当时为一局限海盆环境。稀土元素(REE)中轻稀土相对重稀土富集,且北美页岩标准化分布模式呈近水平略微左倾状,结合元素比值特征和La/YbCe/Yb、La/Yb-ΣREE图解,牛蹄塘组黑色岩系的母岩以长英质岩石为主,但沉积过程也受到海底热液作用影响。同时,根据δCe、δEu的特征与K_2O/Na_2O-SiO_2图解,认为沉积区在早寒武世为被动大陆边缘构造背景。  相似文献   

6.
北秦岭庙湾组黑色岩系稀土元素地球化学特征及成因意义   总被引:2,自引:0,他引:2  
笔者采用等离子质谱仪(ICP-MS)方法对北秦岭大荆区奥陶纪—志留纪庙湾组黑色岩系岩石的稀土元素及V、Ni、Cr、U、Th等微量元素含量进行了测定。结果显示岩石轻稀土元素相对重稀土元素富集, Eu异常值δEu为0.63~10.61(绝多数大于1.54)多呈正异常, Ce异常值δCe为0.65~1.02(平均为0.893) 异常微弱且有正负差异; U/Th值为0.38~4.07, w (V)/w (V +Ni)值为0.38~0.93以及w (Ce)/w (La)值为1.27~2.17。将这些特征值与前人研究成果对比, 并利用La/Yb-Ce/La和La/Yb-REE判别图解判别后, 认为北秦岭区庙湾组黑色岩系形成于活动陆缘一种干燥缺氧较深浅海环境, 黑色岩系形成过程中有热液作用参与。  相似文献   

7.
为了探讨大巴山早寒武世黑色岩层的稀土元素特征及古沉积环境,采用电感耦合等离子体质谱法(ICP-MS)对大巴山城巴断块内的水井沱组黑色岩层的稀土元素及V、Ni、Cr、U、Th、Zn、Co等微量元素质量分数进行了测定,并与前人研究的鲁家坪组黑色岩层进行了对比分析。研究结果表明,城巴断块内的黑色岩层轻稀土元素相对重稀土元素富集,Ce异常值δCeN为0.47~0.94(平均值0.69),δCeS为0.46~0.91(平均值0.67)呈负异常,Eu异常值δEuN=0.27~1.03(平均值0.57),δEuS=0.42~1.57(绝大多数小于0.87),δEu基本呈现负异常;U/Th比值为2.52~67.51,Sr/Cu比值为5.83~27.96,V/(V+Ni)比值为0.65~0.98,V/Cr比值为1.35~17.79及δU值为1.77~1.99,结合REE的北美页岩标准化曲线、La-Ce图解、Zn-Ni-Co三角图解及La/Yb-REE判别图解的分析表明,大巴山城巴断块内的早寒武世黑色岩层沉积时所处的古气候为干热型气候,黑色岩层形成于被动大陆边缘的缺氧浅海陆棚-斜坡过渡带的沉积环境,且明显受到热液作用的影响。  相似文献   

8.
为了深入探讨黔南地区早石炭世黑色岩系沉积-构造环境,笔者对页岩气钻孔CY1井打屋坝组黑色岩系进行了详细采样测试,并重点分析了页岩稀土元素地球化学特征。分析结果表明,该区早石炭世页岩稀土元素总量(ΣREE)为(213.08~308.1)×10-6,平均值为251.43×10-6,大于北美页岩的平均值(173. 21×10-6);w(ΣLREE)/w(ΣHREE)及w(Ce)N/w(Yb)N等地球化学参数表明,轻、重稀土元素分异明显;REE分布模式呈平坦状,表现出轻稀土富集、重稀土元素亏损;δEu值为0.53~0.67 < 1,显示中等程度的负Eu异常,Ce异常表现不明显。根据δCe和Ce异常值的变化,反映研究区早石炭世为缺氧还原环境。根据稀土元素组合特征、δEu值的变化及w(La)N/w(Yb)N-ΣREE的图解特征,结合区域地质背景,认为黔南地区打屋坝组黑色页岩的物源来自黔中隆起和雪峰山隆起,母岩为沉积岩和花岗岩的混合,沉积区构造环境为被动大陆边缘构造背景。  相似文献   

9.
通过对罗平富乐铅锌矿区地层及矿石进行了稀土元素地球化学特征对比研究.结果显示,梁山组样品 ΣREE值25.91×10-6~108.40×10-6,δEu值0.35~0.73,δCe值0.64~1.35.具Eu负异常和Ce弱正异常;阳新组碳酸盐岩样品 ΣREE值0.82×10-6~6.75×10-6,δEu值0.15~0.97,δCe值0.22~0.62,具Eu负异常和Ce负异常;玄武岩样品 ΣREE值204.17×10-6~290.57×10-6,δEu值变化范围0.91~0.97,δCe值1.02~1.03,Eu异常和Ce异常不明显.峨眉山玄武岩、阳新组、梁山组岩石与矿石REE配分模式比较区别明显,暗示成矿物质并非这些地层提供另有其它来源;梁山组及含矿地层阳新组样品为轻稀土富集型,并具有Eu负异常,暗示地层可能形成于被动大陆边缘还原环境.  相似文献   

10.
贵州早寒武世的缺氧事件沉积   总被引:3,自引:1,他引:3  
贵州早寒武世的黑色岩系属中国南方该时期缺氧事件沉积的一部分,为一套沉积速率低的海侵体系域沉积.主要为黑色页岩,发育水平纹理,主要含浮游生物,其中产钼、钒等矿床.其具有独特的元素地球化学特征SiO2、TiO2、Al2O3的含量相对较高;富集Mo、V、Ba、Ag、Au、U等元素,而Co、Sr、Ta等元素却亏损;稀土总量不高,为130×10-5~226×10-6,稀土配分曲线形态近于水平或略向右倾,具弱的负Ce异常和正Eu异常.地层特征、元素地球化学特征及特征元素比值所反映的是早寒武世黑色岩系形成于缺氧的还原环境,而缺氧沉积中有热水沉积的加入.  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

18.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

19.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号