Integration multisource data for mineral exploration by using fuzzy logic,case study: Taknar deposit,NE of Iran

The Taknar Zone is located at the northern margin of the eastern Iranian continental microplate, and it is host to the Taknar massive sulfide deposit. This study was conducted to find new exploration targets. We used multiple data sources (e.g., litho-geochemical and magnetic surveys) to produce more effective predictive maps. Principal component analysis and hierarchical cluster analysis methods were used to organize the new information into favorability maps and to determine multi-element correlations. We then employed fuzzy logic modeling to create favorability maps from geochemical and magnetic data. A concentration–area multifractal method was used to evaluate the final integrated favorability map for massive sulfide exploration. Our new map identifies previously unexploited sites in the eastern part of the study area, near the boundary of the Taknar formation, with intrusive and subvolcanic rocks, with potential for mineral exploration. The newly defined targets are attractive because old mined ore bodies are also identified in the favorability map.     

Fuzzy logic mineral potential mapping for copper exploration using multi-disciplinary geo-datasets,a case study in seridune deposit,Iran

This paper describes the application of the knowledge-based fuzzy logic method to integrate various exploratory geo-dataset in order to prepare a mineral prospectivity map (MPM) for copper exploration. Different geophysical layers which are derived from the magnetic and the electrical surveys, along with the ones extracted from the background geology (i.e., lithology, fault and alteration) and geochemical data are incorporated in such process. Seridune copper deposit located in the Kerman province of Iran is the case study to delineate its high potential zones of Cu-bearing mineralization for drilling additional boreholes. Four layers from the magnetic data involving upward continuation, analytic signal, reduced to pole and pseudo gravity are assigned in the multi-disciplinary geo-dataset to locate the intrusive complexes responsible for Cu mineralization. The apparent resistivity, chargeability and sulfide factor layers acquired from geo-electrical data are also included in the final preparation of MPM. Then the normalized weights of seven geophysical, three geological and one geochemical evidential layers as main criteria are determined based upon the knowledge of expert decision makers. Fuzzy operators (i.e., Sum and Gamma) are applied to integrate these exploratory features. To evaluate the performance and applicability of the approach, the productivity of the drilled boreholes (Cu concentration multiplied by ore thickness) are used to validate the produced MPMs. It is shown that an optimum correlation coefficient of 0.86 exists between the MPM values and Cu productivity criterion along drilled boreholes.     

基于Mamdani FIS模型的滑坡易发性评价研究

滑坡的形成是众多非线性关系的影响因子相互作用的结果,传统滑坡预测方法需要大量实地勘查数据。利用Mamdani FIS(模糊推理系统)模型对三峡库区巴东-秭归段进行滑坡易发性预测,并对结果进行评价。通过地理信息系统(geographic information system,GIS)、遥感(remote sensing,RS)技术和区域地质背景资料获取地形类、生态环境类和地质背景类共3类7种滑坡影响因子,建立了192条相关的推理规则,在Matlab平台下基于Mamdani FIS模型得到研究区滑坡易发性预测指数,并生成滑坡易发性区划图。预测结果的受试者工作特征曲线下的面积值为82.8%,显示滑坡评估效果良好。结果证明,与其他模型相比,基于空间信息技术的Mamdani FIS模型,利用其非线性分析能力和基于专家意见的推理规则,评估滑坡易发性时不需要先验知识支撑,简化了模型使用时对数据的要求。另外,该模型只需通过专家意见改变推理规则就可以应用于不同的地质地理环境区域,显示其较强的适应性。     

Clustering of mineral prospectivity area as an unsupervised classification approach to explore copper deposit

This paper describes the usage of clustering methods including self-organizing map (SOM) and fuzzy c-means (FCM) which are applied to prepare mineral prospectivity map. Different evidential layers, including geological, geophysical, and geochemical, to evaluate Now Chun copper deposit located in the Kerman province of Iran are used. Clustering approaches are used to reduce the dimension of 13 feature vectors derived from different layers. At first, Geospatial Information Systems (GIS) is employed to analyze and integrate different layers, and the area under study is prioritized to five classes. Then, the SOM as an unsupervised classification method is carried out to classify this area into five clusters. Produced clusters are compared with GIS prospect map, while the SOM results are matched with the GIS output. The main reason to use the FCM is that a vector belongs simultaneously to more than one cluster so that membership values of each cluster can be mapped. As a consequence, clusters generated by the SOM and FCM are considerably matched with five-class-map of the GIS approach. The chosen cluster as a high potential location to additional drilling is matched to the main alteration and faults zone. To validate generated clusters for mineral potential mapping, geological matching of study area and selected proper cluster can be a satisfactory way. Finally, clustering methods can be a very fast approach to interpret the area under study.     

Hybrid outranking of geospatial data: Multi attributive ideal-real comparative analysis and combined compromise solution

Identifying mineralization areas with an acceptable level of reliability is a complex matter demanding the implementation of supervised methods for mapping mineralization exploration aims. In this study, further collecting all available exploratory information and data of the region of study, their good processing and analysis, and then integrating them with an appropriate method, multi-criteria decision-making (MCDM) approaches were utilized to outranking porphyry Cu mineralization areas. This paper describes an acceptable procedure for obtaining evidential layers for recognizing porphyry Cu mineralization, assigning weight to the layers, and combining them. For this aim, first, a data-driven multi-class index overlay (DMIO) approach is applied as it is a proven method with proper results in mineral prospectivity mapping (MPM) to integrate evidential layers (criteria and sub-criteria emanated from geoscience data including geological, geochemical, remote sensing, and geophysical datasets). After that, two recent MCDM models, combined compromise solution (CoCoSo) and multi attributive ideal-real comparative analysis (MAIRCA), were used to prioritize the porphyry Cu potential areas producing MPM. Concentration-area (C–A) fractal method and prediction-area (P–A) plots by considering the areas of occurrence of the known mineralization and normalized density (N_d) as traditional methods were applied for weighting and integration evidential layers and evaluation of the final maps in a data-driven manner. Consequently, verifying the verisimilitude of the MAIRCA prospectivity map (N_d = 3.17) is similar to the DMIO map in delimiting the priority areas. The results of the CoCoSo model (N_d = 2.7) show this methodology was also successfully applied in mapping the porphyry Cu mineralization areas in the study.     

A Hybrid Neuro-Fuzzy Model for Mineral Potential Mapping

A GIS-based hybrid neuro-fuzzy approach to mineral potential mapping implements a Takagi–Sugeno type fuzzy inference system in a four-layered feed-forward adaptive neural network. In this approach, each unique combination of predictor patterns is considered a feature vector whose components are derived by knowledge-based ordinal encoding of the constituent predictor patterns. A subset of feature vectors with a known output target vector (i.e., unique conditions known to be associated with either a mineralized or a barren location), extracted from a set of all feature vectors, is used for the training of an adaptive neuro-fuzzy inference system. Training involves iterative adjustment of parameters of the adaptive neuro-fuzzy inference system using a hybrid learning procedure for mapping each training vector to its output target vector with minimum sum of squared error. The trained adaptive neuro-fuzzy inference system is used to process all feature vectors. The output for each feature vector is a value that indicates the extent to which a feature vector belongs to the mineralized class or the barren class. These values are used to generate a favorability map. The procedure is applied to regional-scale base metal potential mapping in a study area located in the Aravalli metallogenic province (western India). The adaptive neuro-fuzzy inference system demarcates high favorability zones occupying 9.75% of the study area and identifies 96% of the known base metal deposits. This result is significant both in terms of reduction in search area and the percentage of deposits identified.     

DEFLOGIC: a method for assessment of groundwater potential in karst terrains: Gurpi Anticline,southwest Iran

A new hydro-tectonic model, includes eight layers that affect karst hydrogeology was proposed for mapping of groundwater potential in karst areas of Gurpi Anticline, southwest Iran. To produce the groundwater potential map, remote sensing (RS) and GIS techniques were combined with fuzzy logic modeling. Criterion maps include the distances from discharge sites (D), the elevation difference from discharge sites (E), the distance from fractures (F), the fracture length density (L), the slope (O), the lithology (G), the distance from fractures intersections (I), and the fractures intersection density (C) were produced using GIS and RS techniques (DEFLOGIC layers). The approach of fuzzy sets was used to commensurate criterion maps, then fuzzy algebraic sum and gamma operators were applied to aggregate them. The weights of parameters of DEFLOGIC proposed in the range of 1 to 5, which standardized between 0 to 1, based on their importance in karst hydrogeology, professional judgments, and available exploration data. The final groundwater potential maps were verified by geoelectric and well-drilling data. The potential map prepared using fuzzy gamma operator with γ?=?0.92, which it is a flexible distinctive parameters of sum and product of fuzzy operator, depicts the best coincidence with exploration data. The final DEFLOGIC map shows the high groundwater potential in karst formations between Hati and Pebde valleys. The results support the efficiency of DEFLOGIC model to evaluating of groundwater potential in karst terrains, especially in Zagros ranges.     

Geology,geodynamics and orogenic gold prospectivity modelling of the Paleoproterozoic Kumasi Basin,Ghana, West Africa

This paper describes the geology and tectonics of the Paleoproterozoic Kumasi Basin, Ghana, West Africa, as applied to predictive mapping of prospectivity for orogenic gold mineral systems within the basin. The main objective of the study was to identify the most prospective ground for orogenic gold deposits within the Paleoproterozoic Kumasi Basin. A knowledge-driven, two-stage fuzzy inference system (FIS) was used for prospectivity modelling. The spatial proxies that served as input to the FIS were derived based on a conceptual model of gold mineral systems in the Kumasi Basin. As a first step, key components of the mineral system were predictively modelled using a Mamdani-type FIS. The second step involved combining the individual FIS outputs using a conjunction (product) operator to produce a continuous-scale prospectivity map. Using a cumulative area fuzzy favourability (CAFF) curve approach, this map was reclassified into a ternary prospectivity map divided into high-prospectivity, moderate-prospectivity and low-prospectivity areas, respectively. The spatial distribution of the known gold deposits within the study area relative to that of the prospective and non-prospective areas served as a means for evaluating the capture efficiency of our model. Approximately 99% of the known gold deposits and occurrences fall within high- and moderate-prospectivity areas that occupy 31% of the total study area. The high- and moderate-prospectivity areas illustrated by the prospectivity map are elongate features that are spatially coincident with areas of structural complexity along and reactivation during D4 of NE–SW-striking D2 thrust faults and subsidiary structures, implying a strong structural control on gold mineralization in the Kumasi Basin. In conclusion, our FIS approach to mapping gold prospectivity, which was based entirely on the conceptual reasoning of expert geologists and ignored the spatial distribution of known gold deposits for prospectivity estimation, effectively captured the main mineralized trends. As such, this study also demonstrates the effectiveness of FIS in capturing the linguistic reasoning of expert knowledge by exploration geologists. In spite of using a large number of variables, the curse of dimensionality was precluded because no training data are required for parameter estimation.     

Data fusion and porphyry copper prospectivity models,southeastern Arizona

Mineral exploration programs commonly use a combination of geological, geophysical and remotely sensed data to detect sets of optimal conditions for potential ore deposits. Prospectivity mapping techniques can integrate and analyse these digital geological data sets to produce maps that identify where optimal conditions converge. Three prospectivity mapping techniques – weights of evidence, fuzzy logic and a combination of these two methods – were applied to a 32,000 km² study area within the southeastern Arizona porphyry Cu district and then assessed based on their ability to identify new and existing areas of high mineral prospectivity. Validity testing revealed that the fuzzy logic method using membership values based on an exploration model identified known Cu deposits considerably better than those that relied solely on weights of evidence, and slightly better than those that used a combination of weights of evidence and fuzzy logic. This led to the selection of the prospectivity map created using the fuzzy logic method with membership values based on an exploration model. Three case study areas were identified that comprise many critical geological and geophysical characteristics favourable to hosting porphyry Cu mineralisation, but not associated with known mining or exploration activity. Detailed analysis of each case study has been performed to promote these areas as potential targets and to demonstrate the ability of prospectivity modelling techniques as useful tools in mineral exploration programs.     

Predicting saturated hydraulic conductivity using particle swarm optimization and genetic algorithm

Soil saturated hydraulic conductivity (K_s) is considered as soil basic hydraulic property, and its precision estimation is a key element in modeling water flow and solute transport processes both in the saturated and vadose zones. Although some predictive methods (e.g., pedotransfer functions, PTFs) have been proposed to indirectly predict K_s, the accuracy of these methods still needs to be improved. In this study, some easily available soil properties (e.g., particle size distribution, organic carbon, calcium carbonate content, electrical conductivity, and soil bulk density) are employed as input variables to predict K_s using a fuzzy inference system (FIS) trained by two different optimization techniques: particle swarm optimization (PSO) and genetic algorithm (GA). To verify the derived FIS, 113 soil samples were taken, and their required physical properties were measured (113 sample points?×?7 factors?=?791 input data). The initial FIS is compared with two methods: FIS trained by PSO (PSO-FIS) and FIS trained by GA (GA-FIS). Based on experimental results, all three methods are compared according to some evaluation criteria including correlation coefficient (r), modeling efficiency (EF), coefficient of determination (CD), root mean square error (RMSE), and maximum error (ME) statistics. The results showed that the PSO-FIS model achieved a higher level of modeling efficiency and coefficient of determination (R²) in comparison with the initial FIS and the GA-FIS model. EF and R² values obtained by the developed PSO-FIS model were 0.69 and 0.72, whereas they were 0.63 and 0.54 for the GA-FIS model. Moreover, the results of ME and RMSE indices showed that the PSO-FIS model can estimate soil saturated hydraulic conductivity more accurate than the GA-FIS model with ME?=?10.4 versus 11.5 and RMSE?=?5.2 versus 5.5 for PSO-FIS and GA-FIS, respectively.     

Assessment of landslide susceptibility for a landslide-prone area (north of Yenice, NW Turkey) by fuzzy approach

. Regional landslide susceptibility assessments pose complex problems. To solve these problems, numerous approaches, such as statistical analysis, geotechnical engineering approach, geomorphologic approach and fuzzy logic, have been employed. However, all the available methods for regional landslide susceptibility assessments have some uncertainties due to a lack of knowledge and variability. Minimizing these uncertainties provides realistic approaches. Use of the fuzzy logic approach to produce a landslide susceptibility map of a landslide-prone area in NW Turkey is the main purpose of the present study. For this purpose, the study includes five main stages, these being the preparation of a landslide inventory of the study area, the application of factor analysis, the extraction of fuzzy if-then rules, the use of a geographical information system, and the control of the reliability of the resulting landslide susceptibility map. Slope angle, slope aspect, land use, weathering depth, water conditions and topographical elevation were considered as landslide conditioning factors for the study area. A total of 23 if-then rules was extracted from the field data. Employing these rules, fuzzified index maps representing each parameter were obtained. Finally, combining these maps, the landslide susceptibility map of the area was prepared. When compared with the landslide susceptibility map, the landslides identified in the area were found to be located in the very high- and high-susceptibility zones. As far as the performance of the fuzzy approach for processing is concerned, the images appear to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.     

Exploration feature selection applied to hybrid data integration modeling: Targeting copper-gold potential in central Iran

A Sugeno-type fuzzy inference system is implemented in the framework of an adaptive neural network to map Cu–Au prospectivity of the Urumieh–Dokhtar magmatic arc (UDMA) in central Iran. We use the hybrid “Adaptive Neuro Fuzzy Inference System” (ANFIS; Jang, 1993) algorithm to optimize the fuzzy membership values of input predictor maps and the parameters of the output consequent functions using the spatial distribution of known mineral deposits. Generic genetic models of porphyry copper–gold and iron oxide copper–gold (IOCG) deposits are used in conjunction with deposit models of the Dalli porphyry copper–gold deposit, Aftabru IOCG prospect and other less important Cu–Au deposits within the study area to identify recognition criteria for exploration targeting of Cu–Au deposits. The recognition criteria are represented in the form of GIS predictor layers (spatial proxies) by processing available exploration data sets, which include geology, stream sediment geochemistry, airborne magnetics and multi-spectral remote sensing data. An ANFIS is trained using 30% of the 61 known Cu–Au deposits, prospects and occurrences in the area. In a parallel analysis, an exclusively expert-knowledge-driven fuzzy model was implemented using the same input predictor maps. Although the neuro-fuzzy analysis maps the high potential areas slightly better than the fuzzy model, the well-known mineralized areas and several unknown potential areas are mapped by both models. In the fuzzy analysis, the moderate and high favorable areas cover about 16% of the study area, which predict 77% of the known copper–gold occurrences. By comparison, in the neuro-fuzzy approach the moderate and high favorable areas cover about 17% of the study area, which predict 82% of the copper–gold occurrences.     

Regional Exploration Targeting Model for Gangdese Porphyry Copper Deposits

An exploration targeting model for Gangdese porphyry copper deposit in Tibet, China, is constructed based on (i) the age of porphyry intrusions within Gangdese magmatic arc; (ii) the regional‐scale normal E–W, N–S and N–E striking faults; and (iii) comprehensive anomalously high concentrations of Cu‐Mo‐Au‐Ag‐Pb‐Zn. These targeting elements are derived from geological map and geochemical dataset, and are integrated by weights of evidence with the aid of geographic information system (GIS). The resulting prospectivity for porphyry copper deposits delineated by posterior probability demonstrates that the target areas extend along the Yaluzangbujiang River and contain the two large deposits, Qulong and Chongjiang, located in the eastern and central part of the Gangdese belt, respectively. These results indicate that the proposed exploration targeting model is a potential tool to map regional‐scale mineral prospectivity. The target areas with high values of favorability, especially where high concentrations of Cu‐Mo‐Au‐Ag‐Pb‐Zn are present, are the potential areas for finding undiscovered porphyry copper deposits.     

A comparative study of conventional, ANN black box, fuzzy and combined neural and fuzzy weighting procedures for landslide susceptibility zonation in Darjeeling Himalayas

Landslides are one of the most destructive phenomena of nature that cause damage to both property and life every year, and therefore, landslide susceptibility zonation (LSZ) is necessary for planning future developmental activities. In this paper, apart from conventional weighting system, objective weight assignment procedures based on techniques such as artificial neural network (ANN), fuzzy set theory and combined neural and fuzzy set theory have been assessed for preparation of LSZ maps in a part of the Darjeeling Himalayas. Relevant thematic layers pertaining to the causative factors have been generated using remote sensing data, field surveys and Geographic Information System (GIS) tools. In conventional weighting system, weights and ratings to the causative factors and their categories are assigned based on the experience and knowledge of experts about the subject and the study area to prepare the LSZ map (designated here as Map I). In the context of objective weight assignments, initially the ANN as the black box approach has been used to directly produce an LSZ map (Map II). In this approach, however, the weights assigned are hidden to the analyst. Next, the fuzzy set theory has then been implemented to determine the membership values for each category of the thematic layer using the cosine amplitude method (similarity method). These memberships are used as ratings for each category of the thematic layer. Assuming weights of each thematic layer as one (or constant), these ratings of the categories are used for the generation of another LSZ map (Map III). Subsequently, a novel weight assignment procedure based on ANN is implemented to assign the weights to each thematic layer objectively. Finally, weights of each thematic layer are combined with fuzzy set derived ratings to produce another LSZ map (Map IV). The maps I–IV have been evaluated statistically based on field data of existing landslides. Amongst all the procedures, the LSZ map based on combined neural and fuzzy weighting (i.e., Map IV) has been found to be significantly better than others, as in this case only 2.3% of the total area is found to be categorized as very high susceptibility zone and contains 30.1% of the existing landslide area.     

A new approach for forest fire risk modeling using fuzzy AHP and GIS in Hyrcanian forests of Iran

The presented research was performed in order to model the fire risk in a part of Hyrcanian forests of Iran. The fuzzy sets integrated with analytic hierarchy process (AHP) in a decision-making algorithm using geographic information system (GIS) was used to model the fire risk in the study area. The used factors included four major criteria (topographic, biologic, climatic, and human factors) and their 17 sub-criteria. Fuzzy AHP method was used for estimating the importance (weight) of the effective factors in forest fire. Based on this modeling method, the expert ideas were used to express the relative importance and priority of the major criteria and sub-criteria in forest fire risk in the study area. The expert ideas mean was analyzed based on fuzzy extent analysis. Then, the fuzzy weights of criteria and sub-criteria were obtained. The major criteria models and fire risk model were presented based on these fuzzy weights. On the other hand, the spatial data of 17 sub-criteria were provided and organized in GIS to obtain the sub-criteria maps. Each sub-criterion map was converted to raster format and it was reclassified based on risk of its classes to fire occurrence. Then, all sub-criteria maps were converted to fuzzy format using fuzzy membership function in GIS. The fuzzy map of each major criterion (topographic, biologic, climatic, and human criteria) was obtained by weighted overlay of its sub-criteria fuzzy maps considering to major criterion model in GIS. Finally, the fuzzy map of fire risk was obtained by weighted overlay of major criteria fuzzy maps considering to fire risk model in GIS. The actual fire map was used for validation of fire risk model and map. The results showed that the fuzzy estimated weights of human, biologic, climatic, and topographic criteria in fire risk were 0.301, 0.2595, 0.2315, and 0.208, respectively. The results obtained from the fire risk map showed that 38.74% of the study area has very high and high risk for fire occurrence. Results of validation of the fire risk map showed that 80% of the actual fires were located in the very high and high risk areas in fire risk map. It can show the acceptable accuracy of the fire risk model and map obtained from fuzzy AHP in this study. The obtained fire risk map can be used as a decision support system for predicting of the future fires in the study area.     

A comprehensive VIKOR method for integration of various exploratory data in mineral potential mapping

The central Iranian volcanic-sedimentary belt in Kerman province of Iran that is located within the Urumieh-Dokhtar magmatic arc zone is chosen to integrate diverse evidential layers for mineral potential mapping. The studied area has high potential of mineral occurrences especially porphyry copper, and the prepared potential maps aim to outline new prospect zones for further investigation. Two evidential layers including the downward continued map and the analytic signal of filtered magnetic data are generated to be used as geophysical plausible traces of porphyry copper occurrences. The low values of the resistivity layer acquired from airborne frequency domain electromagnetic data are also used as an electrical criterion in this study. Four remote sensing evidential layers including argillic, phyllic, propylitic, and hydroxyl alterations are extracted from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images in order to map the altered areas associated with porphyry copper deposits. The Enhanced Thematic Mapper Plus (ETM+) images are used as well to prepare iron oxide layer. Since potassic alteration is generally the mainstay of copper ore mineralization, the airborne potassium radiometry data is used to explore both phyllic and potassic alteration. Finally, the geochemical layers of Cu/B/Pb/Zn elements and the main geochemical component responsible for ore mineralization extracted from principal component analysis are included in the integration process to prepare final potential maps. The conventional and the extended version of VIKOR method (as a well-known algorithm in multi-criteria decision making problems) produced two mineral potential maps, and the results were compared with the ones acquired from prevalent methods of the index overlay and fuzzy logic operators of sum and gamma. The final mineral potential maps based upon desired geo-data set indicate adequately matching of high potential zones with previous working and active mines of copper deposits.     

Fuzzy logic application in compiling multi geohazards macro-zone maps; case study: Rahdar, 1:25,000 Quadrangle,Khuzestan, Iran

This paper is devoted to describe a new method of fuzzy logic applied to multi geohazards macro-zone maps. The basic steps are (1) compilation of macro-zone maps for each type of geohazard phenomenon. Each phenomenon is then assigned one of seven geohazard zones: very low, low, relatively low, moderate, relatively high, high, and very high; (2) definition of a membership function using a fuzzy logic algorithm to quantify the qualitative data, estimate a geohazard grade for each mesh point, and to convert qualitative maps to quantitative maps; (3) computation of the summed hazard grade for each mesh point and creation a cumulative geohazard map; and (4) compilation of a multi geohazards macro-zone map by defining a mathematical algorithm and again using fuzzy logic. The paper also describes a mechanism that takes subjective engineering judgments into account. Finally, a geohazard map with a scale of 1:25,000 (Rahdar district, Khuzestan, Iran) is compiled. This study divides the area into seven geohazard macro-zones. Zones of high and very high geohazard classification cover most of the area due to the large number of sinkholes and asymmetric subsidences, rock falls and other slop movements. Low and very low hazard zones only cover small localities.     

Application of logistic regression and fuzzy operators to landslide susceptibility assessment in Azdavay (Kastamonu,Turkey)

Landslides and their assessments are of great importance since they damage properties, infrastructures, environment, lives and so on. Particularly, landslide inventory, susceptibility, and hazard or risk mapping have become important issues in the last few decades. Such maps provide useful information and can be produced by qualitative or quantitative methods. The work presented in this paper aimed to assess landslide susceptibility in a selected area, covering 570.625 km² in the Western Black Sea region of Turkey, by two quantitative methods. For this purpose, in the first stage, a detailed landslide inventory map was prepared by extensive field studies. A total of 96 landslides were mapped during these studies. To perform landslide susceptibility analyses, six input parameters such as topographical elevation, lithology, land use, slope, aspect and distance to streams were considered. Two quantitative methods, logistic regression and fuzzy approach, were used to assess landslide susceptibility in the selected area. For the fuzzy approach, the fuzzy and, or, algebraic product, algebraic sum and gamma operators were considered. At the final stage, 18 landslide susceptibility maps were produced by the logistic regression and fuzzy operators in a GIS (Geographic Information System) environment. Two performance indicators such as ROC (relative operating characteristics) and cosine amplitude method (r _ij ) were used to validate the final susceptibility maps. Based on the analyses, the landslide susceptibility map produced by the fuzzy gamma operator with a level of 0.975 showed the best performance. In addition, the maps produced by the logistic regression, fuzzy algebraic product and the higher levels of gamma operators showed more satisfactory results, while the fuzzy and, or, algebraic sum maps were not sufficient to provide reliable outputs.     

Landslide risk assessment using concepts of danger pixels and fuzzy set theory in Darjeeling Himalayas

Landslide risk assessment (LRA) is a key component of landslide studies. The landslide risk can be defined as the potential for adverse consequences or loss to human population and property due to the occurrence of landslides. The LRA can be regional or site-specific in nature and is an important information for planning various developmental activities in the area. LRA is considered as a function of landslide potential (LP) and resource damage potential (RDP). The LP and RDP are typically characterized by the landslide susceptibility zonation map and the resource map (i.e., land use land cover map) of the area, respectively. Development of approaches for LRA has always been a challenge. In the present study, two approaches for LRA, one based on the concept of danger pixels and the other based on fuzzy set theory, have been developed and implemented to generate LRA maps of Darjeeling Himalayas, India. The LRA map based on the first approach indicates that 1,015 pixels of habitation and 921 pixels of road section are under risk due to landslides. The LRA map derived from fuzzy set theory based approach shows that a part of habitat area (2,496 pixels) is under very high risk due to landslides. Also, another part of habitat area and a portion of road network (7,204 pixels) are under high risk due to landslides. Thus, LRA map based on the concept of danger pixels gives the pixels under different resource categories at risk due to landslides whereas the LRA map based on the concept of fuzzy set theory further refines this result by defining the degree of severity of risk to these categories by putting these into high and low risk zones. Hence, the landslide risk assessment study carried out using two approaches in this paper can be considered in cohesion for assessing the risks due to landslides in a region.     

Artificial neural networks: A new method for mineral prospectivity mapping

A multilayer feed‐forward neural network, trained with a gradient descent, back‐propagation algorithm, is used to estimate the favourability for gold deposits using a raster GIS database for the Tenterfield 1:100 000 sheet area, New South Wales. The database consists of solid geology, regional faults, airborne magnetic and gamma‐ray survey data (U, Th, K and total count channels), and 63 deposit and occurrence locations. Input to the neural network consists of feature vectors formed by combining the values from co‐registered grid cells in each GIS thematic layer. The network was trained using binary target values to indicate the presence or absence of deposits. Although the neural network was trained as a binary classifier, output values for the trained network are in the range [0.1, 0.9] and are interpreted to indicate the degree of similarity of each input vector to a composite of all the deposit vectors used in training. These values are rescaled to produce a multiclass prospectivity map. To validate and assess the effectiveness of the neural‐network method, mineral‐prospectivity maps are also prepared using the empirical weights of evidence and the conceptual fuzzy‐logic methods. The neural‐network method produces a geologically plausible mineral‐prospectivity map similar, but superior, to the fuzzy logic and weights of evidence maps. The results of this study indicate that the use of neural networks for the integration of large multisource datasets used in regional mineral exploration, and for prediction of mineral prospectivity, offers several advantages over existing methods. These include the ability of neural networks to: (i) respond to critical combinations of parameters rather than increase the estimated prospectivity in response to each individual favourable parameter; (ii) combine datasets without the loss of information inherent in existing methods; and (iii) produce results that are relatively unaffected by redundant data, spurious data and data containing multiple populations. Statistical measures of map quality indicate that the neural‐network method performs as well as, or better than, existing methods while using approximately one‐third less data than the weights of evidence method.