In Memoriam

Abstract

The engineering properties of deep continental margin sediments were determined on a worldwide basis. Deep Sea Drilling Project (DSDP) core data and material were utilized from over 900 cores obtained from 89 sites, primarily on the continental margins. Cores were recovered from penetrations to 200 m in water depths averaging 3000 m. Supplementary laboratory testing on selected cores was directed toward determining index properties and shear strength properties of the sediments. The study included a literature review of deep‐sea soil properties, the results of which are to be used by DSDP to evaluate foundation conditions for reentry cones with long casing strings. The results will also be used for a feasibility study of an ultradeepwater marine riser and well‐control system. The marine sediments examined can be divided into three main types: clay, calcareous ooze, and siliceous ooze. Sediment distribution consisted of 48% calcareous ooze, 43% clay, 6% siliceous ooze, and 3% volcanic ash. Because of the sample disturbance inherent in the deepwater coring operation, emphasis was placed on analyzing sediment properties not significantly affected by changes in in situ stresses and structure caused by sampling. Averages and ranges in values of water content and unit weight are presented for the three main sediment types. Plasticity and strength characteristics are discussed in detail and the elastic and compression properties are outlined. The geotechnical properties of deep continental margin soils are summarized.     

南海东部海域表层沉积物类型的研究

南海东部海域表层沉积物可被分为11种类型:含岩块砾石黏土质粉砂、贝壳珊瑚砂、黏土质粉砂、钙质黏土、钙质软泥、有孔虫砂、深海黏土、含铁锰微粒粉砂质黏土、硅质黏土、含火山灰硅质黏土、含火山灰粉砂质黏土.这些类型按物源和成因可被分为陆源碎屑、钙质碎屑和硅质碎屑、火山碎屑3大类型,其中陆源碎屑分布面积约占50%,钙质碎屑占20%,硅质碎屑和火山碎屑各占15%.在物质来源、海底地形、火山作用、生物作用、水动力条件等因素影响和控制下,由于沉积环境的差异,故区内褐色类沉积物最多(60.68%),灰色类沉积物次之(38.20%),黄色类沉积物最少(1.12%).台湾省以南到17°N以北海区沉积物以陆源沉积物分布为主;巴士海峡以西海区沉积物较粗,常含砂岩块和砾石;东沙群岛以东海区钙质生物碎屑沉积丰富;中、西部海区以含铁锰微粒沉积物为主;中、南部海区水深大,主要分布硅质沉积物;南部海区、礼乐滩北缘沉积物受礼乐滩珊瑚碎屑影响大,沉积物类型为钙质软泥.     

Relationships between the sound speed ratio and physical properties of surface sediments in the South Yellow Sea

Building empirical equations is an effective way to link the acoustic and physical properties of sediments. These equations play an important role in the prediction of sediments sound speeds required in underwater acoustics.Although many empirical equations coupling acoustic and physical properties have been developed over the past few decades, further confirmation of their applicability by obtaining large amounts of data, especially for equations based on in situ acoustic measurement techniques, is required. A sediment acoustic survey in the South Yellow Sea from 2009 to 2010 revealed statistical relationships between the in situ sound speed and sediment physical properties. To improve the comparability of these relationships with existing empirical equations, the present study calculated the ratio of the in situ sediment sound speed to the bottom seawater sound speed, and established the relationships between the sound speed ratio and the mean grain size, density and porosity of the sediment. The sound speed of seawater at in situ measurement stations was calculated using a perennially averaged seawater sound speed map by an interpolation method. Moreover, empirical relations between the index of impedance and the sound speed and the physical properties were established. The results confirmed that the existing empirical equations between the in situ sound speed ratio and the density and porosity have general suitability for application. This study also considered that a multiple-parameter equation coupling the sound speed ratio to both the porosity and the mean grain size may be more useful for predicting the sound speed than an equation coupling the sound speed ratio to the mean grain size.     

深海沉积物分类与命名

详细分析了国内外深海沉积物分类与命名现状,迄今为止深海沉积物分类与命名问题没有很好解决。在调查研究南海、太平洋深海沉积物分类与命名基础上,提出了分类简便、科学合理、量化的深海沉积物分类与命名新方法,应用该方法得出南海东部海域深海沉积物有深海粘土、硅质粘土、钙质粘土、硅钙质粘土、钙质软泥、粘土质钙质软泥、粘土质-硅质钙质软泥、粘土-硅质-钙质混合软泥、粘土质硅质-钙质混合软泥、钙质硅质-粘土混合软泥。这10种沉积物基本上客观地反映了南海东部海域深海沉积物分布的实际情况,分类效果良好。     

印度洋钙质软泥和硅质软泥稀土元素组成和富集机制

本文针对采自印度洋深海中最常见的两类生物成因沉积物——钙质软泥和硅质软泥,开展了全岩样和不同粒级组分中常微量元素、稀土元素和Y（REY）含量的系统分析,探讨了两类沉积物中REY的组成特征、物质来源和富集机制。研究表明,钙质软泥以富含CaO和Sr为主要特征,硅质软泥则富集SiO₂、Al₂O₃、Fe₂O₃等。钙质软泥中∑REY平均含量为40.56×10-6,轻稀土元素（LREE）略有富集,REY有向细粒沉积物中富集的特征,PAAS标准化后全岩样和不同粒级组分均表现为Ce负异常、Eu和Y正异常;REY以自生来源为主,继承了海水的组成特征,同时也受到了热液流体物质和洋底玄武岩风化产物的影响。硅质软泥中∑REY的含量为248.54×10-6,LREE相对富集,REY在4φ以细的沉积物中富集;研究站位沉积物中∑REY含量处于边界品位附近,但在细粒级沉积物中重稀土元素（HREY）含量则达到了工业品位;该类沉积物细粒组分中REY主要来自陆源或火山碎屑组分中黏土矿物和铁锰氧化物吸附作用,粗粒组分中REY来源则主要与生物作用相关;硅质软泥中REY的富集与沉积物中磷灰石等矿物相关,部分不同来源的REY可能是在沉积之后的成岩过程中再次分配向磷灰石、钙十字沸石等矿物中富集。     

High‐frequency subbottom reflection types and lithologic and physical properties of sediments

Abstract

Eight types of reflections are interpreted from 3,800 km of 3.5 kHz profiles taken over a 25,000 km² area of the upper continental slope and shelf in the northeastern Gulf of Mexico off Panama City, Florida. The corresponding sediments in five of the reflection types were sampled in 77 piston cores from which data were obtained on in situ acoustic velocities (V), bulk densities (gr), sediment texture (mean grain size = Mz), CaCO₃ content (C), sedimentary structures, and gross sediment composition. A distinct bottom echo with numerous subbottom reflectors (Type I) is observed in deeper areas where terrigenous clay or lutite (Mgi = 9.9 to, gr = 1.4 g/cc, porosity (P) = 74 percent, C = 28 percent, and V (upper 2 m) = 1,435 m/s) predominates. Type I reflection grades upslope into Type IV, which shows a distinct bottom echo with fewer subbottom reflectors, and the corresponding sediment is a foraminiferal silty clay (mz = 9.4 to, gr = 1.43 g/cc, P = 73 percent, V = 1,447 m/s, and C = 37 percent). The uppermost slope gives indistinct, semiprolonged bottom echoes with faint subbottoms (Type VI) where calcareous silt (Mz = 6.6 to, gr = 1.57 g/cc, P = 65 percent, C = 70 percent, and V = 1,482 m/s) is the main sediment type. The shelf sediments (gr = 1.66 g/cc, P = 58 percent, V = sl1,530 m/ s), varying from coarse silt (Mz = 5.3 to) to very coarse sand (Mz = ‐0.3 to) and 25 to 100 percent carbonate, show indistinct, semiprolonged bottom echoes with intermittent or mushy subbottoms (Type VII). Prolonged echoes with no subbottoms (Type VIII) are observed in areas where algal sands of variable grain size (Mz ‐ ‐0.9 to 2.7 to, gr = 1.66 g/cc, P = 59 percent, V = 1,530 to 1,690 m/s) occur.

The major trends in reflection types (loss in depth of penetration, loss in number of reflectors, and prolongation of initial bottom reflections) follow gradients of sedimentary and physical properties of the sediments, which are increases in mean grain size, bulk density, in situ acoustic velocity, CaCO₃ content, and decrease in porosity. Increases in the reflection coefficient and attenuation of the sound energy in the shelf sediments are probably important factors in the observed decrease in the depth of penetration of the sound energy in the shelf sediments.     

Acoustic-Physical Properties of Calcareous Seafloor Soils and Their Significance in Engineering Geology

—The basic features and acoustic-physical properties of calcareous seafloor soils in the tropicsea area are obviously different from those of sediments mainly composed of terrigenous materials in theSouth China Sea.Generally.calcareous soils.composed of carbonate particles of marine organism re-mains.have the characteristics of high water content.high porosity.low wet density.high sound velocityand greatly varied compressive strength Recogni/ing the differences between calcareous soils andterrigenous sediments and engineering geologic significance of calcareous soils is crucial for seafloorgeologic research and geotechnical survey for pile jacket platform foundation design.     

Phillipsite in deep-sea sediments

Ｐｈｉｌｌｉｐｓｉｔｅｉｎｄｅｅｐ－ｓｅａｓｅｄｉｍｅｎｔｓ￥ＰｅｎｇＨａｎｃｈａｎｇａｎｄＬｉｕＺｈｅｎｇｋｕｎ（ＲｅｃｅｉｖｅｄＭａｒｃｈ５，１９９３；ａｃｃｅｐｔｅｄＡｕｇｕｓｔ１４，１９９３）Ａｂｓｔｒａｃｔ：──Ａｐｈｉｌｌｉｐｓｉｔｅａｓ...     

Physical Properties and their Relationship to Texture and Consolidation Effects in Pliocene-Quaternary Sediments from Madeira Abyssal Plain

Multi-sensor core logger data and index properties were measured onboard the JOIDES resolution during ODP Leg 157 and compared with grain size distribution and carbonate contents measured in the on-shore laboratory. Cored sediments are similar in grain size, but very variable in carbonate content. Magnetic susceptibility clearly defines the volcanic turbidite layers, whereas GRAPE density and acoustic velocity help to define the coarser (silty) bases of some organic or calcareous turbidite layers. Index properties are mostly controlled by consolidation effects.     

The Effects of Microstructure on Shear Properties of Shallow Marine Sediments

This study was undertaken to investigate the implication of geoacoustic behaviors in the shallow marine sediments associated with the changes in geotechnical index properties. Two piston cores (270 cm and 400 cm in core length) used in this study were recovered from stations 1 and 2, the western continental margin, the East Sea. Scanning electron microscopy (SEM) was employed to illustrate the effects of microstructure on shear properties. The direct SEM observation of sediment fabrics is inevitable to understand the correlation of the changes in geoacoustic properties to the sediment structure. The consolidation of sediments by overburden stress resulting in the clay fabric alteration appears to play an important role in changing shear properties. Water contents and porosity of sediments gradually decreases with increasing depth, whereas wet bulk density shows a reverse trend. It is interesting to note that shear wave velocities increase rapidly from 8 to 20 m/s while compressional wave velocities significantly fluctuate, ranging from 1450 to 1550 m/s with depth. The fabric changes in sediment with increasing depth for example, uniform grain size and well oriented clay fabrics may cause the shear strength increase from 1 to 12 kPa. Shear wave velocity is, therefore, shown to be very sensitive to the changes in undrained strength for unconsolidated marine sediments. This correlation allows an in-situ estimation of shear stress in the subsurface from shear wave velocity data.     

Physical Properties and their Relationship to Texture and Consolidation Effects in Pliocene-Quaternary Sediments from Madeira Abyssal Plain

Multi-sensor core logger data and index properties were measured onboard the JOIDES resolution during ODP Leg 157 and compared with grain size distribution and carbonate contents measured in the on-shore laboratory. Cored sediments are similar in grain size, but very variable in carbonate content. Magnetic susceptibility clearly defines the volcanic turbidite layers, whereas GRAPE density and acoustic velocity help to define the coarser (silty) bases of some organic or calcareous turbidite layers. Index properties are mostly controlled by consolidation effects.     

东太平洋CC区西区表层沉积物黏土矿物和地球化学特征

本文以太平洋CC区西区12个表层沉积物样品作为研究对象,对其粒度、化学组分和矿物成分进行分析,讨论其沉积环境和物质来源。研究区地处深海,主要以深海黏土和硅钙质黏土为主,含有少量的硅质黏土、黏土质硅质软泥和黏土质钙质软泥。黏土矿物成分主要是蒙皂石和伊利石,含有部分的高岭石和绿泥石。黏土矿物组成表明,区内沉积物主要是陆源,由高空气流携带而来,南极底流和热液活动对其物源的来源有一定影响。沉积物地球化学特征也表明,物源以陆源为主,稀土元素分布曲线和北太平洋表层海水稀土曲线类似,且表现出强的Ce亏损,表明生物活动导致的生物沉降对表层沉积物也有一定的影响。     

粘性类土侵蚀强度量化研究

海洋动力作用下,粘性土内部粘结力与重力的联合作用使其冲刷侵蚀特性较为复杂。从侵蚀原理出发,利用粘结力仪进行侵蚀试验,探讨了粘性土临界侵蚀剪应力τ_c与土体物理力学性质之间的相关性,并提出中值粒径、粘粒含量、密度及抗剪强度与τ_c之间的计算关系式。同时通过侵蚀公式计算结果与试验结果比较,验证了试验结果的准确性。     

Distribution pattern and morphochemical relationships of manganese nodules from the Central Indian Basin

In the Central Indian Basin manganese nodule abundance was variable in all sediment types. Mean abundance varied from 1.5 in calcareous ooze to 10.2 kg/m² in terrigenous-siliceous ooze sediments. Nodule grade and growth rates are positively correlated only up to 10 mm/My (million years), and grade shows no distinct relationship with abundance. Relationships between the morphochemical characteristics of the nodules and host sediment types are subtle. Both hydrogenetic and diagenetic nodules (with smooth and rough surfaces respectively) occur on almost all sediments, but in variable proportions. Thus, the overall distribution pattern shows that small nodules (<4-cm diameters) of lower grade (average value Ni+Cu+Co=1.21%) with smooth surfaces are more common on red clay, terrigenous, and terrigenous-siliceous ooze transition-zone sediments. By contrast, large nodules (>4-cm diameters) of higher grade (average value Ni+Cu+Co=1.80%) with rough surfaces are more prevalent on siliceous ooze, siliceous ooze-red clay, and calcareous ooze-red clay transition-zone sediments. This implies an enhanced supply of trace metals from pore waters to rough-surface nodules during early diagenesis.     

基于Chirp数据和Biot-Stoll模型反演南海北部陆坡海底表层沉积物物理性质

浅地层剖面是基于声学信号(频率在几百至几千赫兹)在沉积物中的传播得到可反映沉积地层结构的数据,海底反射系数与沉积物物理性质密切相关。Biot-Stoll声波传播理论模型可以预测海底沉积物的物理性质,构建反射系数等声学参数与物理参数之间的关系,但在不同的海域采用不同的参数所获得的效果不同。为此,本文基于南海北部陆坡海底表层沉积物的实测物理参数,利用Biot-Stoll模型建立研究区海底反射系数和沉积物物理性质之间的关系,结果表明模型计算值与样品实测值吻合度总体较好,偏差在0.1%～4.9%之间,并建立了频率3.5 kHz时海底反射系数与沉积物孔隙度、密度、平均粒径之间的关系方程,且方程拟合度较高,可决系数R2均大于0.99。在对典型Chirp剖面数据计算其海底反射系数的基础上,反演了海底表层沉积物的孔隙度、密度、颗粒平均粒径等物理性质,其中反演孔隙度、密度、平均粒径与实测孔隙度、密度、平均粒径相对误差均小于5%,结果与实测值基本相符,表明该反演方法在南海北部陆坡区的应用是可行的。     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.     

太平洋东部CC48孔沉积物稀土元素地球化学研究

研究样品于１９８８年采自太平洋东部ＣＣ４８孔。通过对沉积物稀土元素地球化学特征的分析发现：（１）各种类型深海沉积物的稀土含量有所差别，以稀土元素总量而论，深海粘土＞硅质软泥＞硅钙质软泥＞钙质软泥；沉积物中的自生矿物、硅质生物成因的非晶质ＳｉＯ２及碎屑矿物对稀土元素起富集作用，而生物ＣａＣＯ３则起分散作用。（２）稀土元素含量随深度发生变化。为地层划分提供了依据，应用元素地层学方法将岩芯分成５个层段。     

基于浅地层剖面的海底浅表层沉积物物理性质参数反演技术研究

海底浅表层（小于1 m）沉积物的物理性质,如粒度、孔隙度、密度等是海洋沉积学研究和海洋工程地质分析的重要内容,目前主要基于有限的海底取样或原位测试获取这些沉积物的物理性质。浅地层剖面是基于声学信号（频率几千赫兹）在沉积物中的传播得到可反映沉积地层结构的数据,其中的一些声学参数,如海底反射系数、波阻抗等与沉积物物理性质密切相关。如何充分而有效地利用浅地层剖面资料,反演得到剖面覆盖区海底浅表层沉积物的物理性质参数,极具科学意义和应用价值,且基于声学属性反演沉积物物理性质是当前研究的热点。为此,本文基于渤海LD16-3CEPA至LD10-1PAPD路由段的浅地层剖面数据和海底表层沉积物的实测物理参数,利用Biot-Stoll模型建立研究区海底反射系数和沉积物物理性质之间的关系,并基于浅地层剖面数据计算得到的海底反射系数,反演了研究区海底浅表层沉积物的孔隙度、密度、平均粒径等物理性质参数。其中反演的孔隙度、密度、平均粒径与实测孔隙度、密度、平均粒径基本相符,偏差度基本都在20%的偏差范围内,表明该反演方法在该区的应用是可行的。     

Fast reconnaissance of carbonate dissolution based on the size distribution of calcareous ooze on Walvis Ridge, SE Atlantic Ocean

We present a new index of carbonate fragmentation based on the size distribution of bulk sediments in core MD962094 from Walvis Ridge (SE Atlantic Ocean). The carbonate fragmentation index is constructed by taking a ratio of the two coarsest fractions in the grain size distributions of the bulk calcareous ooze. The coarsest two fractions (25–90 μm and >90 μm) of the bulk sediments consist primarily of complete shells and fragments of adult foraminifera shells, and juvenile foraminifera shells and fragments, respectively. The ratio of the proportions of the two fractions is interpreted as a measure of fragmentation of the foraminifera shells caused by carbonate dissolution. Downcore changes in our carbonate fragmentation index compare very well with those in the coarse-carbonate fragmentation index in sediments from a nearby core on Walvis Ridge. The latter commonly used fragmentation index is defined as a ratio of foraminifera fragments over whole foraminifera in the >150-μm fraction as seen with a light microscope. Fragmentation is relatively high during glacial stages and relatively low during interglacial stages during the last 300 kyr, caused by the combined effect of wind-driven upwelling of corrosive water and increased production of organic matter, decreasing the preservation potential of carbonates both during and after deposition. The carbonate fragmentation index we present here provides a precise and fast method to establish a downcore fragmentation record. It can be applied to bulk sediments that are carbonate-rich (CaCO₃>68%) and to all other deep-marine sediments of which the grain size distribution of the carbonate-free fraction is available.     

南海北部大陆架海底沉积物物理性质研究

用物理(声学的、工程地质的、扫描电子显微镜)等技术方法,综合分析了沉积物结构特征和工程力学性质,研究了颗粒接触、堆垒、孔隙等现象与物理性质之间的关系,得出了沉积物声学物理参数和应力一应变性质之间的关系。结果表明,南海北部大陆架海底沉积物有6种结构类型,其中混合接触结构类型的沉积物具有较高的抗压强度和声速,浅层海底存在着高、低声速分层的中尺度结构。