共查询到20条相似文献,搜索用时 31 毫秒
1.
Investigation of well-exposed volcaniclastic deposits of Shiveluch volcano indicates that large-scale failures have occurred
at least eight times in its history: approximately 10,000, 5700, 3700, 2600, 1600, 1000, 600 14C BP and 1964 AD. The volcano was stable during the Late Pleistocene, when a large cone was formed (Old Shiveluch), and became
unstable in the Holocene when repetitive collapses of a portion of the edifice (Young Shiveluch) generated debris avalanches.
The transition in stability was connected with a change in composition of the erupting magma (increased SiO2 from ca. 55–56% to 60–62%) that resulted in an abrupt increase of viscosity and the production of lava domes. Each failure
was triggered by a disturbance of the volcanic edifice related to the ascent of a new batch of viscous magma. The failures
occurred before magma intruded into the upper part of the edifice, suggesting that the trigger mechanism was indirectly associated
with magma and involved shaking by a moderate to large volcanic earthquake and/or enhancement of edifice pore pressure due
to pressurised juvenile gas. The failures typically included: (a) a retrogressive landslide involving backward rotation of
slide blocks; (b) fragmentation of the leading blocks and their transformation into a debris avalanche, while the trailing
slide blocks decelerate and soon come to rest; and (c) long-distance runout of the avalanche as a transient wave of debris
with yield strength that glides on a thin weak layer of mixed facies developed at the avalanche base. All the failures of
Young Shiveluch were immediately followed by explosive eruptions that developed along a similar pattern. The slope failure
was the first event, followed by a plinian eruption accompanied by partial fountain collapse and the emplacement of pumice
flows. In several cases the slope failure depressurised the hydrothermal system to cause phreatic explosions that preceded
the magmatic eruption. The collapse-induced plinian eruptions were moderate-sized and ordinary events in the history of the
volcano. No evidence for directed blasts was found associated with any of the slope failures.
Received: 28 June 1998 / Accepted: 28 March 1999 相似文献
2.
David A. John Thomas W. Sisson George N. Breit Robert O. Rye James W. Vallance 《Journal of Volcanology and Geothermal Research》2008
Hydrothermal alteration at Mount Rainier waxed and waned over the 500,000-year episodic growth of the edifice. Hydrothermal minerals and their stable-isotope compositions in samples collected from outcrop and as clasts from Holocene debris-flow deposits identify three distinct hypogene argillic/advanced argillic hydrothermal environments: magmatic-hydrothermal, steam-heated, and magmatic steam (fumarolic), with minor superimposed supergene alteration. The 3.8 km3 Osceola Mudflow (5600 y BP) and coeval phreatomagmatic F tephra contain the highest temperature and most deeply formed hydrothermal minerals. Relatively deeply formed magmatic-hydrothermal alteration minerals and associations in clasts include quartz (residual silica), quartz–alunite, quartz–topaz, quartz–pyrophyllite, quartz–dickite/kaolinite, and quartz–illite (all with pyrite). Clasts of smectite–pyrite and steam-heated opal–alunite–kaolinite are also common in the Osceola Mudflow. In contrast, the Paradise lahar, formed by collapse of the summit or near-summit of the edifice at about the same time, contains only smectite–pyrite and near-surface steam-heated and fumarolic alteration minerals. Younger debris-flow deposits on the west side of the volcano (Round Pass and distal Electron Mudflows) contain only low-temperature smectite–pyrite assemblages, whereas the proximal Electron Mudflow and a < 100 y BP rock avalanche on Tahoma Glacier also contain magmatic-hydrothermal alteration minerals that are exposed in the avalanche headwall of Sunset Amphitheater, reflecting progressive incision into deeper near-conduit alteration products that formed at higher temperatures. 相似文献
3.
Flank spreading and collapse of weak-cored volcanoes 总被引:1,自引:1,他引:0
Volcanoes subjected to hydrothermal activity develop weak cores as a result of alteration and due to elevated pore pressures. Edifices constructed at the angle of repose of volcanoclastics, or at even more gentle slopes, respond to internal weakening by initially deforming slowly, but may then collapse catastrophically. Such a process has so far been described for only a few volcanoes, such as Casita, Nicaragua; however, the conditions for flank spreading are widespread and many, if not most volcanoes should suffer some alteration-related flank spreading. We provide analogue models that characterise the structure — surface deformation fields and internal structures — of a spreading flank. Deformation creates a characteristic concave-convex-concave flank profile producing structures such as basal thrusts, summit normal faults, grabens and strike-slip relay faults. Three deformation regimes are found: a pit collapse regime is associated with very small volumes of ductile material located far from the edifice surface. This would not appear in nature, as time for deformation is greater than the lifetime of a volcano, unless very low rock viscosities are present. The other two regimes are flank spreading regimes, one symmetric and one asymmetric. The latter is the most common, as most volcanic structures are asymmetrical in form and in distribution of physical properties. The deformation is controlled by altered region dimensions, volume and position relative to the edifice, and to a lesser extent by its shape. As the flanks spread, landslides are created, initially on the steepened portion, but also from fault scarps. Major flank collapse may occur leading to explosive hydrothermal decompression and to a debris avalanche rich in hydrothermally altered material. We provide several new examples of volcanoes that have structures and morphologies compatible with flank spreading. We suggest that it is a common feature, important in the tectonics and hazards of many volcanoes.Editorial Responsibility: J. Gilbert 相似文献
4.
Audray Delcamp Benjamin van Wyk de Vries Mike R. James L. S. Gailler E. Lebas 《Bulletin of Volcanology》2012,74(3):743-765
Volcano spreading, with its characteristic sector grabens, is caused by outward flow of weak substrata due to gravitational
loading. This process is now known to affect many present-day edifices. A volcano intrusive complex can form an important
component of an edifice and may induce deformation while it develops. Such intrusions are clearly observed in ancient eroded
volcanoes, like the Scottish Palaeocene centres, or in geophysical studies such as in La Réunion, or inferred from large calderas,
such as in Hawaii, the Canaries or Galapagos volcanoes. Volcano gravitational spreading and intrusive complex emplacement
may act simultaneously within an edifice. We explore the coupling and interactions between these two processes. We use scaled
analogue models, where an intrusive complex made of Golden syrup is emplaced within a granular model volcano based on a substratum
of a ductile silicone layer overlain by a brittle granular layer. We model specifically the large intrusive complex growth
and do not model small-scale and short-lived events, such as dyke intrusion, that develop above the intrusive complex. The
models show that the intrusive complex develops in continual competition between upward bulging and lateral gravity spreading.
The brittle substratum strongly controls the deformation style, the intrusion shape and also controls the balance between
intrusive complex spreading and ductile layer-related gravitational spreading. In the models, intrusive complex emplacement
and spreading produce similar structures to those formed during volcano gravitational spreading alone (i.e. grabens, folds,
en échelon fractures). Therefore, simple analysis of fault geometry and fault kinetic indicators is not sufficient to distinguish
gravitational from intrusive complex spreading, except when the intrusive complex is eccentric from the volcano centre. However,
the displacement fields obtained for (1) a solely gravitational spreading volcano and for (2) a gravitational spreading volcano
with a growing and spreading intrusive complex are very different. Consequently, deformation fields (like those obtained from
geodetic monitoring) can give a strong indication of the presence of a spreading intrusive complex. We compare the models
with field observations and geophysical evidence on active volcanoes such as La Réunion Island (Indian Ocean), Ometepe Island
(Nicaragua) and eroded volcanic remnants such as Ardnamurchan (Scotland) and suggest that a combination between gravitational
and intrusive complex spreading has been active. 相似文献
5.
《Journal of Volcanology and Geothermal Research》2001,105(3):225-247
Socompa Volcano arguably provides the world's best-exposed example of a sector collapse-derived debris avalanche deposit. New observations lead us to re-interpret the origin of the sector collapse. We show that it was triggered by failure of active thrust-anticlines in sediments and ignimbrites underlying the volcano. The thrust-anticlines were a result of gravitational spreading of substrata under the volcano load. About 80% of the resulting avalanche deposit is composed of substrata formerly residing under the volcano and in the anticlines. The collapse scar can be traced up to 5 km from the edifice, truncating two spreading-related anticlines, which collapsed in the event. Outcrops near the volcano preserve evidence of edifice material being carried along on top of mobilised substrata. On the north side of the scar, the avalanche motion was initially at right angles to the failure edge. Structural relations indicate that immediately prior to collapse the substrata disintegrated, became effectively liquidised, and were ejected from beneath the edifice. Catastrophic mobilisation of substrata probably resulted from breakdown of ignimbrite clasts and cement. It may have occurred through progressive rock fracture by high shear strain during spreading. Material ejected from under Socompa formed a layer on which volcanic edifice debris was transported. This interpretation of events explains the puzzling observation that avalanche units with the lowest gravitational potential energy moved the furthest. It can also account for avalanche motion normal to the collapse scar walls. Ignimbrites and other rock types probably capable of similar behaviour underlie many other volcanoes. Identification of spreading at other sites could therefore be a first step towards assessment of the potential for this style of catastrophic sector collapse. 相似文献
6.
Nathan D. Stansell 《Bulletin of Volcanology》2013,75(1):1-4
Radiocarbon-dated lake sediments provide minimum-limiting ages for two major debris avalanches originating from Mombacho Volcano in Nicaragua. A basal age from Lake El Gancho indicates that the northeast debris avalanche (Las Isletas) occurred sometime before ~140 to 345 A.D. Basal ages from Lakes Blanca and Verde indicate that the southern (El Crater) debris avalanche occurred sometime before ~270 to 650 A.D. Both events therefore occurred in the space of a few centuries, yet there is strong evidence that the mechanisms varied for destabilization of each flank. Possibly, the influence of a developing hydrothermal system lead first to deeper structural failure in the substrata to produce the Las Isletas sector collapse, progressing to higher level destabilization within the edifice and the El Crater collapse. 相似文献
7.
For first time, during 1991, seismic activity was recorded during an eruption at Colima volcano. We analyze these data to
obtain a stress pattern using a composite focal mechanism technique. From the analysis of regional seismicity, the Tamazula
Fault and the Armeria River appear as active features and the dip of the slab east of the Jalisco Block is approximately 12°.
Southwest of Colima volcano a vertical alignment of seismic events was observed. We estimate five different composite focal
mechanism solutions from our data set, which indicate a change of the stress field at the volcano after the 1991 eruption.
These solutions suggest that the stress field in the volcanic edifice was controlled by stresses related to the emplacement
of magma superimposed on the regional stress field. No evidence of active local faults in the volcanic edifice was found.
We propose a model for the eruptive process that involves tilting of the volcanic edifice.
Received: 15 October 1995 / Accepted: 26 October 1998 相似文献
8.
R. J. Watters D. R. Zimbelman S. D. Bowman J. K. Crowley 《Pure and Applied Geophysics》2000,157(6-8):957-976
—Catastrophic edifice and sector failure occur commonly on stratovolcanoes worldwide and in some cases leave telltale horseshoe-shaped calderas. Many of these failures are now recognised as having resulted from large-scale landsliding. These slides often transform into debris avalanches and lahars that can devastate populations downstream of the volcano. Research on these phenomena has been directed mainly at understanding avalanche mechanics and travel distances and related socioeconomic impacts. Few investigations have examined volcanic avalanche source characteristics. The focus of this paper is to 1) describe a methodology for obtaining rock strengths that control initial failure and 2) report results of rock mass strength testing from Mount Rainier and Mount Hood. Rock mass and shear strength for fresh and hydrothermally altered rocks were obtained by 1) utilizing rock strength and structural information obtained from field studies and 2) applying rock mechanics techniques common in mining and civil engineering to the edifice region. Rock mass and intact rock strength differences greatly in excess of one order of magnitude were obtained when comparing strength behavior of fresh and completely altered volcanic rock. The recognition and determination of marked strength differences existing on the volcano edifice and flank, when combined with detailed geologic mapping, can be used to quantify volcano stability assessment and improve hazard mitigation efforts. 相似文献
9.
10.
Edifice and substrata deformation induced by intrusive complexes and gravitational loading in the Mull volcano (Scotland) 总被引:1,自引:1,他引:0
It is likely that the structure of a volcanic edifice can be significantly modified by deformation caused by large, shallow
intrusions. Such deformation may interact with that caused by volcano loading. We explore such intrusion-related and loading-related
deformation with field evidence and analogue models. To do this we have chosen the eroded Palaeogene Mull volcano (Scotland)
that had a major edifice, has well exposed intrusions and significant deformation. There are thin Mesozoic sedimentary rocks
forming ductile layers below the volcano, but their thickness is insufficient to allow the gravitational spreading of the
volcanic edifice, especially when considering that a thick lava pile covers them. Thus intrusive push may have been the driving
force for deformation. The Mull activity migrated toward the northwest, forming three successive intrusive complexes (Centres
1, 2 and 3). Our detailed fieldwork reveals that deformation due to these was accommodated on three levels; along thrust planes
in lava sequences, along a décollement located in a thin clay-rich sediment succession and in basement schists. A relative
chronology has been established between different groups of structures using dyke and sill cross-cutting relationships. Centre
1 is surrounded by a fold and thrust belt leading to radial expansion. In contrast, Centre 2 and 3 are connected to thrusts
located to the south and east, bounded by strike-slip faults, leading to expansion to the southeast. The migration of centres
and the directed sliding of the edifice may be related to the presence to the southeast of low-resistance Dalradian basement
that failed significantly during growth of Centres 2 and 3. To study the observed relationships we have carried out scaled
analogue models. Models are made with fine powder intruded by a viscous magma analogue. The models show an intimate relationship
between intrusion growth, uplift of the volcano and subsequent flank sliding. The structures produced can be compared with
Mull and suggest that the Centre 1 thrust belt probably formed following edifice gravitational sliding as a consequence of
the uplift associated with Centre 1 formation. Centre 2 and 3 are responsible for the sector sliding of the edifice flank
toward the southeast as the magmatic complex became more asymmetric. The features observed at Mull and in the models are similar
to those seen on active volcanoes, such as Etna, providing a structural framework for their deformation and evolution. 相似文献
11.
Claus Siebe Jean-Christophe Komorowski Michael F Sheridan 《Bulletin of Volcanology》1992,54(7):573-589
A pre-historic collapse of the northeastern flank of Jocotitlán Volcano (3950 m), located in the central part of the Trans Mexican Volcanic Belt, produced a debris-avalanche deposit characterized by surficial hummocks of exceptional size and conical shape. The avalanche covered an area of 80 km2, had an apparent coefficient of friction (H/L)_of 0.11, a maximum runout distance of 12 km, and an estimated volume of 2.8 km3. The most remarkable features of the Jocotitlán debris avalanche deposit are: the several steep (29–32°) conical proximal hummocks (up to 165 m high), large tansverse ridges (up to 205 m high and 2.7 km long) situated at the base of the volcano, and the steep 15–50 m thick terminal scarp. Proximal conical hummocks and parallel ridges that can be visually fitted back to their pre-collapse position on the mountain resulted from a sliding mode of emplacement. Steep primary slopes developed as a result of the accumulation of coarse angular clasts at the angle of repose around core clasts that are decameters in size. Distal hummocks are commonly smaller, less conical, and clustered with more diffuse outlines. Field evidence indicates that the leading distal edge of the avalanche spilled around certain topographic barriers and that the distal moving mass had a yield strength prior to stopping. In the NE sector, the avalanche was suddenly confined by topographically higher lacustrine and volcaniclastic deposits which as a result were intensely thrust-faulted, folded, and impacted by large clasts that separated from the avalanche front. Post-emplacement loading also induced normal faulting of these soft, locally water-rich sediments. The regional tectonic pattern, N-NE direction of flank failure, and the presence of a major normal fault which intersects the volcano and is parallel to the orientation of the Acambay graben located 10 km to the N suggest a genetic relationship between the extensional tectonic stress regime and triggering of catastrophic slope failure. The presence of a 3-m-thick sequence of pumice and obsidian-rich pyroclastic surge and fall tephra directly overlying the debris-avalanche deposit indicates that magma must have been present within the edifice just prior to the catastrophic flank failure. The breached crater left by the avalanche has mostly been filled by dacitic domes and lava flows. The youngest pryroclastic surge deposits on the upper flanks of the volcano have an historical C14 age of 680±80 yearsBp (Ad 1270±80). Thus Jocotitlán volcano, formerly believed to be extinct, should be considered potentially active. Because of its close proximity to Mexico-City (60 km), the most populous city in the world, reactivation could engender severe hazards. 相似文献
12.
Llullaillaco is one of a chain of Quaternary stratovolcanoes that defines the present Andean Central Volcanic Zone (CVZ), and marks the border between Chile and Argentina/Bolivia. The current edifice is constructed from a series of thick dacitic lava flows, forming the second tallest active volcano in the world (6739 m). K–Ar and new biotite laser 40Ar/39Ar step-heating dates indicate that the volcano was constructed during the Pleistocene (≤1.5 Ma), with a youngest date of 0.048±0.012 Ma being recorded for a fresh dacite flow that descends the southern flank. Additional 40Ar/39Ar measurements for andesitic and dacitic lava flows from the surrounding volcanic terrain yield dates of between 11.94±0.13 Ma and 5.48±0.07 Ma, corresponding to an extended period of Miocene volcanism which defines much of the landscape in this region. Major- and trace-element compositions of lavas from Llullaillaco are typical of Miocene–Pleistocene volcanic rocks from the western margin of the CVZ, and are related to relatively shallow-dipping subduction of the Nazca plate beneath northern Chile and Argentina.Oversteepening of the edifice by stacking of thick, viscous, dacitic lava flows resulted in collapse of its southeastern flank to form a large volcanic debris avalanche. Biotite 40Ar/39Ar dating of lava blocks from the avalanche deposit indicate that collapse occurred at or after 0.15 Ma, and may have been triggered by extrusion of a dacitic flow similar to the one dated at 0.048±0.012 Ma. The avalanche deposits are exceptionally well preserved due to the arid climate, and prominent levées, longitudinal ridges, and megablocks up to 20-m diameter are observed.The avalanche descended 2.8 km vertically, and bifurcated around an older volcano, Cerro Rosado, before debouching onto the salt flats of Salina de Llullaillaco. The north and south limbs of the avalanche traveled 25 and 23 km, respectively, and together cover an area of approximately 165 km2. Estimates of deposit volume are hampered by a lack of thickness information except at the edges, but it is likely to be between 1 and 2 km3. Equivalent coefficients of friction of 0.11 and 0.12, and excess travel distances of 20.5 and 18.5 km, are calculated for the north and south limbs, respectively. The avalanche ascended 400 m where it broke against the western flank of Cerro Rosado, and a minimum flow velocity of 90 m s−1 can be calculated at this point; lower velocities of 45 m s−1 are calculated where distal toes ascend 200 m slopes.It is suggested that the remaining precipitous edifice has a high probability for further avalanche collapse in the event of renewed volcanism. 相似文献
13.
Volcano-tectonic controls and emplacement kinematics of the Iriga debris avalanches (Philippines) 总被引:1,自引:0,他引:1
Mt Iriga in southeastern Luzon is known for its spectacular collapse scar that was possibly created in 1628 ad by a 1.5-km3 debris avalanche. The debris avalanche deposit (DAD) covered 70?km2 and dammed the Barit River to form Lake Buhi. The collapse has been ascribed to a non-volcanic trigger related to a major strike-slip fault under the volcano. Using a combination of fieldwork and remote sensing, we have identified a similar size, older DAD to the southwest of the edifice that originated from a sector oblique to the underlying strike-slip fault. Both deposits cover wide areas of low, waterlogged plains, to a distance of about 16?km for the oldest and 12?km for the youngest. Hundreds of metre-wide and up to 50-m-high hummocks of intact conglomerate, sand and clay units derived from the base of the volcano show that the initial failure planes cut deep into the substrata. In addition, large proportions of both DAD consist of ring-plain sediments that were incorporated by soft-sediment bulking and extensive bulldozing. An ignimbrite unit incorporated into the younger DAD forms small (less than 5?m high) discrete hummocks between the larger ones. Both debris avalanches slid over water-saturated soft sediment or ignimbrite and spread out on a basal shear zone, accommodated by horst and graben formation and strike-slip faults in the main mass. The faults are listric and flatten into a well-developed basal shear zone. This shear zone contains components from the substrate and has a diffuse contact with the intact substrata. Long, transport-normal ridges in the distal parts are evidence of compression related to deceleration and bulldozing. The collapse orientation and structure on both sectors and DAD constituents are consistent with collapse being a response to combined transtensional faulting and gravity spreading. Iriga can serve as a model for other volcanoes, such as Mayon, that stand in sedimentary basins undergoing transtensional strike-slip faulting. 相似文献
14.
Remote sensing studies of the Central Andean volcanic province between 18°–27°S with the Landsat Thematic Mapper have revealed the presence of 28 previously undescribed breached volcanic cones and 14 major volcanic debris avalanche deposits, of which only 3 had previously been identified. Several of the debris avalanche deposits cover areas in excess of 100 km2 and have volumes of the order of 10 km3. H/L ratios for the deposits have a median of 0.1 and a mean of 0.11, values similar to those determined for deposits described in other regions. Surface morphologies commonly include the hummocky topography of small hillocks and enclosed basins that is typical of avalanche deposits, but some examples exhibit smoother surfaces characterised by longitudinal grooves and ridges. These differences may result from the effects of flow confinement by topography or from variations in resistance to shearing in the materials involved. Breached composite cones and debris avalanche deposits tend to occur at right angles to regional tectonic elements, suggesting possible seismic involvement in triggering collapse and providing an additional consideration for assessment of areas at risk from collapse. The low denudation rate in the Central Andes, coupled with the predominance of viscous dacite lavas in volcanic edifices, produces unusually steep cones which may result in a higher incidence of volcano collapse than in other regions. A statistical survey of 578 composite volcanoes in the study area indicates that a majority of cones which achieve edifice heights between 2000–3000 m may undergo sector collapse. 相似文献
15.
— In September 1999, we collected seven high resolution seismic reflection profiles along the northern continental margin of Papua New Guinea, which targeted the source region of the 1998 tsunami that inundated Sissano Lagoon. We utilized swath bathymetry collected by the JAMSTEC/SOPAC groups in January 1999. The seismic profiles image several faults, bottom simulating reflectors, and a large rotational slump. The slump has a head scarp of 100 m vertical extent, coinciding with the headwall and tension cracks observed previously by submersible at the southern edge of the amphitheater. The central, back-rotated part of the slump is coherent with parallel reflections. The interpreted basal failure plane has a maximum depth of 760 m below the seafloor, and it crops out at a steep escarpment, about 100 meters high, located 4.5 km north of the head scarp. This escarpment separates the slide toe from a series of seafloor-parallel, coherent reflections that are top-lapped by basin deposits at the foot of the amphitheater to the north. The cross-sectional area of the displaced mass is 2.3 km2. From the bathymetry, the width is approximately 2.5–3 km, yielding a total volume (assuming parabolic shape) of 3.8–4.6 km3. Based on these interpretations, the slump was restored to its undeformed position. This technique yields a center of mass vertical drop of 380 m, horizontal movement of 840 m and slip of 980 m along the slide plane. 相似文献
16.
The volcano-tectonic evolution of Concepción,Nicaragua 总被引:1,自引:1,他引:0
We describe the evolution of Concepción volcano by integrating regional geology, eruptive activity, morphology, stratigraphy,
petrology, structure and active deformation data. This Nicaraguan volcano is set close to the back limb of the northwest-trending
Tertiary Rivas anticline, a regional structure that bounds the southwest side of Lake Nicaragua. Concepción rises 1,600 m
above a 1-km-thick sequence of Quaternary lacustrine mud-stones. There is no record of volcanism in the lake prior to Concepción.
In addition, the only nearby volcano, Maderas volcano, has not deposited material on Concepción because of the trade winds.
Thus, Concepción (and Made ras, too) can be considered as pristine volcanic environments, unaffected by other centres. A topographic
rise forms an annulus 20 km in diameter around the cone. The rise is created by thrust-related folds at the western base,
where the trade winds have accumulated a thick sequence of tephra, and by mud diapirs at the eastern base where only lake
mudstones are present. Four magmatic-eruptive episodes exist in the stratigraphic record. The first begins with primitive
low-alumina basalt and subsequently evolves to dacitic compositions. The following three episodes begin with high-alumina
basalts and evolve only to silicic andesites. The occurrence of the high-alumina basalt after the first episode is indicative
of crystal fractionation at lower crustal depths. The first episode may be associated with a compressive phase of volcano
evolution. In this phase, the edifice load compresses substrata, allowing a longer magma residence time and differentiation
in a shallow reservoir (possibly located at the density contrast between the lake sediments and the Tertiary flysch). During
the next three episodes the weak sediments below the volcano started to rupture and yield under its increasing load, beginning
a thrusting/diapiring phase of volcano evolution. Because of outward thrusting, vertical and horizontal stresses above the
chamber were reduced, allowing magma to erupt more easily and to reach a lesser degree of evolution. If we consider the future
evolution of Concepción, the differentiation in the shallow reservoir has probably generated a cumulitic complex, which eventually
will start to deform and spread, beginning another, this time plutonic, spreading phase. This phase, which may be beginning
now, could allow less evolved magmas to be erupted again. Four components influence the phases of volcano evolution: (1) the
regional geology that is the boundary condition of the environment, (2) the substrata rheology that controls deformation,
(3) the load of the volcanic edifice and (4) the magma, which provides the input of mass and energy. Our model of volcanic
evolution suggests that Concepción is a complex geologic environment. The volcanic activity, tectonics and hazards can only
be constrained through a complete knowledge of the many components of this environment.
Published online: 20 February 2003
Editorial responsibility: R. Cioni 相似文献
17.
Kenichiro Tani Richard S. Fiske Yoshihiko Tamura Yukari Kido Jiro Naka Hiroshi Shukuno Rika Takeuchi 《Bulletin of Volcanology》2008,70(5):547-562
Sumisu volcano was the site of an eruption during 30–60 ka that introduced ∼48–50 km3 of rhyolite tephra into the open-ocean environment at the front of the Izu-Bonin arc. The resulting caldera is 8 × 10 km
in diameter, has steep inner walls 550–780 m high, and a floor averaging 900 m below sea level. In the course of five research
cruises to the Sumisu area, a manned submersible, two ROVs, a Deep-Tow camera sled, and dredge samples were used to study
the caldera and surrounding areas. These studies were augmented by newly acquired single-channel seismic profiles and multi-beam
seafloor swath-mapping. Caldera-wall traverses show that pre-caldera eruptions built a complex of overlapping dacitic and
basaltic edifices, that eventually grew above sea level to form an island about 200 m high. The caldera-forming eruption began
on the island and probably produced a large eruption column. We interpret that prodigious rates of tephra fallback overwhelmed
the Sumisu area, forming huge rafts of floating pumice, choking the nearby water column with hyperconcentrations of slowly
settling tephra, and generating pyroclastic gravity currents of water-saturated pumice that traveled downslope along the sea
floor. Thick, compositionally similar pumice deposits encountered in ODP Leg 126 cores 70 km to the south could have been
deposited by these gravity currents. The caldera-rim, presently at ocean depths of 100–400 m, is mantled by an extensive layer
of coarse dense lithic clasts, but syn-caldera pumice deposits are only thin and locally preserved. The paucity of syn-caldera
pumice could be due to the combined effects of proximal non-deposition and later erosion by strong ocean currents. Post-caldera
edifice instability resulted in the collapse of a 15° sector of the eastern caldera rim and the formation of bathymetrically
conspicuous wavy slump structures that disturb much of the volcano’s surface. 相似文献
18.
Usu volcano (Hokkaido, Japan) is a dacitic volcano, known for its high production rate of lava domes and crypto-domes. It is thus a good target to study processes of volcanic dome evolution (upheaval and/or relaxation). We carried out repeated GPS and microgravity surveys on the three most recent domes of Mt. Usu (1910: Meiji Shinzan; 1943–1945: Showa-Shinzan and 1977–1982: Usu-Shinzan). The repeat period was 1 to 2 months and extended from October 1996 to June 1997. We also compare new data with results from former studies. More than 20 years after the start of Usu-Shinzan dome growth, there is still subsidence at a maximum rate of about 7 to 8 cm/year. The reasons for this subsidence are discussed. Repeated gravity surveys revealed an increase of gravity on the domes (about 60±10 microgal/year for Usu-Shinzan, about 15 microgal at Showa-Shinzan and 10 to 20 microgal for Meiji-shinzan); this gravity increase exceeds that expected due to subsidence. We discuss and interpret the excess gravity change in terms of a density increase in the edifice, caused by a combination of processes (contraction of the edifice, water level change, devesiculisation, cooling and magma intrusion). Quantification of these processes at Usu volcano may help to understand the processes of evolution at domes on other volcanoes such as Merapi (Indonesia), Unzen (Japan) or Montserrat (West Indies). 相似文献
19.
文中对腾冲火山区1998—2004年水准及重力观测资料进行了分析,发现垂直形变量大多在±10mm之内,重力变化为几十μGal,火山锥体和断层附近点位活动异常较大,可综合应用多源mogi模型和断层模型解释,断层的活动可使相邻测点的形变方向相反;垂直形变和重力的逐年变化表明火山岩浆处于一种活动状态。将火山区点位各时间段的重力梯度展布在形变-重力关系解释图中,发现数据主要落在Ⅰ、Ⅱ、Ⅳ和Ⅴ区,结合形变量对压力源等效体积的估算,初步认为火山区岩浆目前活动程度较低,暂没有喷发的危险 相似文献
20.
The regional variation of physical and geochemical characteristics of Central American volcanoes occurs in two fundamentally different patterns. The first pattern is symmetrical about Nicaragua. Crustal thickness, silica contents of mafic lavas and volcanic edifice heights are lowest in Nicaragua and increase smoothly toward Costa Rica to the south and Guatemala to the north. Magma density is maximum in Nicaragua and decreases smoothly outward. The regional variation in crustal thickness is just enough so that magma densities, calculated at appropriate Moho pressures, are the same at the base of the crust throughout the region. This is consistent with magma ponding at the base of the crust. The bulk compositions of Central American basalts show the same symmetrical variation. Suites of Nicaraguan basalts plotted in pseudo-ternary CMAS projections indicate large olivine and plagioclase primary-phase volumes. Toward Costa Rica and Guatemala the olivine and plagioclase fields inferred from suites of basaltic lavas are smaller, which is consistent with fractionation at increasing depth.The second pattern is the segmentation of the volcanic front and the plate margin in general. The segmentation strongly affects the spacing and size of volcanic centers. At segment boundaries volcanic centers are generally small and unusually widely spaced. Toward segment interiors volcano spacing and size increase systematically. The LIL element contents of lavas strongly reflect this pattern. For lavas with similar silica contents the larger the volcano, the higher the LIL element contents. The relationships between segmentation, volcano spacing and volcano size are compatible with diapiric rise of magma accumulated in narrow ribbons near the upper surface of the underthrust slab. The relationship between volcano volume and LIL element content is qualitatively in agreement with an open-system fractionation model. 相似文献