基于物理造波和主动消波的黏性数值波浪水槽开发

基于推板造波理论和摇板造波理论,在Open FOAM平台上采用重叠网格技术建立黏性数值波浪水槽,并使用一种结合SIMPLE算法和PISO算法的PIMPLE算法对数值模型进行求解。利用开发的数值模型通过数值收敛性测试和网格独立性测试分别重点研究了时间步长、库朗数和网格尺寸对数值精度和计算效率的影响。并对比研究了此数值模型分别嵌入层流模型和湍流模型的计算精度和计算效率。实现的规则波和二阶有限振幅波与理论结果和试验结果吻合,验证了此黏性数值波浪水槽的造波和主动消波功能。基于二维数值波浪水槽,进一步研究了三维数值造波,数值计算结果与理论结果吻合良好。研究结果不仅验证了重叠网格在二维和三维两相流体域中求解运动物体与流场交互的可靠性和正确性,而且为使用此黏性数值波浪水槽解决更复杂的海洋工程问题提供了依据。     

A numerical model of coastline deformation for sandy beach at downstream of a jetty

A reformed numerical model based on the “one-line theory” for beach deformation is presented. In this model, the change of beach slope during coastline procession is considered.A wave numerical model combined with wave refraction, diffraction and reflection is used to simulate wave climate to increase numerical accuracy.The results show that the numerical model has a good precision based on the adequate field data. The results can be applied to practical engineering.     

砂质海岸突堤式建筑物下游岸线变形数学模型

提出了一种改进的砂质海岸岸滩演变的“一线理论”数学模型.该模型中考虑了岸滩演变过程中岸滩坡度变化的影响,并采用波浪折射、绕射和反射联合计算数学模型模拟掩护区的波浪场,提高了波浪计算的精度.实例计算表明,在验证资料比较充分的条件下,该数学模型计算结果的可靠度较高,可供实际工程规划和设计时参考使用.     

Deterministic combination of numerical and physical coastal wave models

A deterministic combination of numerical and physical models for coastal waves is developed. In the combined model, a Boussinesq model MIKE 21 BW is applied for the numerical wave computations. A piston-type 2D or 3D wavemaker and the associated control system with active wave absorption provides the interface between the numerical and physical models. The link between numerical and physical models is given by an ad hoc unified wave generation theory which is devised in the study. This wave generation theory accounts for linear dispersion and shallow water non-linearity. Local wave phenomena (evanescent modes) near the wavemaker are taken into account. With this approach, the data transfer between the two models is thus on a deterministic level with detailed wave information transmitted along the wavemaker.     

多晶冰细观模拟方法及压力条件下的力学特性

针对多晶冰 ,从物体细观的角度形成三维细观数值模拟方法 ,通过计算与实验结果比较 ,证明了其可行性。在此基础上 ,对具有脆性特性即在高应变速率作用下的多晶冰进行了数值实验 ,求出了在单向受压条件下不同冰晶尺寸的微裂纹密度与应力、应变之间的关系。为正确把握多晶冰的力学特性提供了一种新的研究方法     

不规则波与开孔沉箱相互作用数值模拟

采用三步有限元法对N-S方程进行离散,同时借助CLEAR-VOF方法追踪流体自由表面,利用主动吸收式造波等手段改进了二维不规则波浪数值水槽,使得水槽中的波浪谱与目标靶谱吻合较好。进而建立了不规则波浪与开孔沉箱作用一种新的数值模式,分析研究不规则波作用下开孔沉箱的反射率,并与现有的物模结果和数模结果进行了对比,为不规则波与开孔沉箱作用问题的研究,探求了一种新的数值手段。     

Numerical study of combined overflow and wave overtopping over a smooth impermeable seawall

A numerical wave flume is used to investigate the discharge characteristics of combined overflow and wave overtopping of impermeable seawalls. The numerical procedure computes solutions to the Reynolds-averaged Navier–Stokes equations and includes the generation of an irregular train of waves, the simulation of wave breaking and interaction with a sloping, impermeable wall. The numerical model is first tested against published experimental observations, approximate analytical solutions and empirical design formulae for the cases of pure overflow and pure overtopping. A sequence of numerical experiments simulating combined overflow and overtopping are described. The results are used to determine empirical discharge formulae of the form used in current practice.     

Improvement on open boundaries on a time dependent numerical model of wave propagation in the nearshore region

An improvement on the simulation of outgoing waves on a time dependent numerical model for water wave propagation in the nearshore region is presented. The governing equations consist of a system of first order partial differential equations (PDEs), the equation of continuity and the equation of motion. A comparative study of first order radiation boundary conditions (BCs) and first order radiation BCs combined with sponge layers is presented for cases where outgoing waves leave the numerical domain of calculation through the open boundary. A reduction of spurious reflections from the numerical open boundaries can be obtained with an irrelevant increase in terms of computational cost.     

Domain decomposition and matching for time-domain analysis of motions of ships advancing in head sea

A domain decomposition and matching method in the time-domain is outlined for simulating the motions of ships advancing in waves. The flow field is decomposed into inner and outer domains by an imaginary control surface, and the Rankine source method is applied to the inner domain while the transient Green function method is used in the outer domain. Two initial boundary value problems are matched on the control surface. The corresponding numerical codes are developed, and the added masses, wave exciting forces and ship motions advancing in head sea for Series 60 ship and S175 containership, are presented and verified. A good agreement has been obtained when the numerical results are compared with the experimental data and other references. It shows that the present method is more efficient because of the panel discretization only in the inner domain during the numerical calculation, and good numerical stability is proved to avoid divergence problem regarding ships with flare.     

非线性波传播的新型数值模拟模型及其实验验证引入变换速度变量

以一种新型的含变换速度变量的Boussinesq型方程为控制方程组,采用五阶Runge-Kutta-England格式离散时间积分,采用七点差分格式离散空间导数,并采用恰当的出流边界条件,从而建立了非线性波传播的新型数值模拟模型.对均匀水深水域内波浪传播的数值模拟,说明在引入变换速度后进一步增大了模型的水深适用范围.对潜堤地形上波浪传播的数值模拟说明,在引入变换速度后进一步提高了模型的数值模拟精度.     

轴对称物体上的三阶波浪力

对于轴对称物体,提出了一个三阶波浪力的全绕射计算方法,自由水面上的三阶强迫项采用向外递推的方法加以计算。本方法已在计算机上实现。对于均匀圆柱问题,本方法计算结果与Malenica的半解析解吻合良好。本方法还被用于计算圆柱上的三阶波浪力矩,结果发现在低频区三阶波浪力矩具有很大的量值。     

非线性波传播的新型数值模拟模型及其实验验证

以一种新型的Boussinesq型方程为控制方程组,采用五阶Runge-Kutta-England格式离散时间积分,采用七点差分格式离散空间导数,并通过采用恰当的出流边界条件,从而建立了非线性波传播的新型数值模拟模型.通过对均匀水深水域内波浪传播的数值模拟说明,模型能较好地模拟大水深水域和强非线性波的传播.通过设置不同的入射波参数来进行潜堤地形上波浪传播的物理模型实验,并将数值解与物理模型实验结果进行了比较.     

Nonlinear refraction-diffraction of surface waves in intermediate and shallow water

A numerical scheme for solving the nonlinear Boussinesq equations is introduced. The numerical model is used to investigate nonlinear refraction-diffraction of surface gravity waves over a semicircular shoal. Results are compared with experimental data (Whalin, 1971) and previous reported numerical results by Liu and Tsay (1984) and Liu, Yoon and Kirby (1985). The present calculations reproduce the earlier results for shallow water waves, but are superior in intermediate water depth.     

对流项处理对厦门湾流态数值模拟结果的影响研究

<正>确处理流体力学方程中的对流项对环流的数值模拟起着重要作用。采用数值实验的方式,采用不同的对流项处理方法,模拟了厦门湾潮流场,并将数模结果与物模模拟结果进行对比,分析不同对流项处理方式对厦门湾区域流态模拟结果的影响,以此为依据提出适合港湾的对流项处理方法。     

A Numerical Model for Nonlinear Wave Propagation on Non-uniform Current

On the basis of the new type Boussinesq equations (Madsen et al.,2002),a set of equations explicitly including the effects of currents on waves are derived.A numerical implementation of the present equations in one dimension is described.The numerical model is tested for wave propagation in a wave flume of uniform depth with current present.The present numerical results are compared with those of other researchers.It is validated that the present numerical model can reasonably reflect the nonlinear influences of currents on waves.Moreover,the effects of inputting different incident boundary conditions on the calculated results are studied.     

Deformation of monochromatic water wave trains propagating over a submerged obstacle in the presence of uniform currents

A nonlinear numerical model based on depth averaged equations and a relevant physical model have been investigated for the deformation of the water wave propagating over a submerged parabolic obstacle in the presence of uniform current. Physical and numerical modeling for wave with both following and opposing currents are done to explore the wave evolutions during passage over the submerged obstacle. A third-order Stokes dispersion relation is utilized in some cases in the computation. Separated flow zone is taken into consideration by two empirical equations obtained from the physical model testing done by the authors. Verification and validation of the numerical model by other published theoretical and experimental data are presented.     

Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow

1IntroductionThe fish farming and aquaculture industry areexpanding and the demand for suitable locations forfish farms is increasing.In the future,more of thefish farms will be located offshore,as the number ofsuitable nearshore locations is limited.Futu…     

Numerical modelling of wave-induced currents in the presence of coastal structures

The hydrodynamic aspects of the general methodology of calculation of nearshore processes by means of numerical models are described. The paper focuses on the method implemented for calculating combined wave refraction-diffraction and reflection due to coastal structures and the associated radiation stresses.Results of numerical modelling are compared with experimental data obtained by Gourlay in the case of a shore-connected breakwater with periodic waves.A good agreement is found between both methods of investigation as concerns the spatial distribution of wave height and mean water level (wave-induced set-up). A good similarity of the wave-induced eddies in the lee of the structure is observed. A less satisfactory agreement is obtained between the velocity distributions in several profiles normal to the shore, although the overall order of magnitude is the same.A critical review of several wave-breaking criteria and sensitivity tests of the numerical model lead to advocate the use of the CERC criterion, particularly with steep beach slopes.     

Verification of A Numerical Harbour Wave Model

A numerical model for wave propagation in a harbour is verified by use of physical models.The extended time-dependent mild slope equation is employed as the governing equation,and the model is solved by use of ADI method containing the relaxation factor.Firstly,the reflection coefficient of waves in front of rubble-mound breakwaters under oblique incident waves is determined through physical model tests,and it is regarded as the basis for simulating partial reflection boundaries of the numerical model.Then model tests on refraction,diffraction and reflection of waves in a harbour are performed to measure wave height distribution.Comparative results between physical and numerical model tests show that the present numerical model can satisfactorily simulate the propagation of regular and irregular waves in a harbour with complex topography and boundary conditions.     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.