Numerical Simulations of Seasonally Oscillated Groundwater Dynamics in Coastal Confined Aquifers

Studies investigating the effects of inland recharge on coastal groundwater dynamics were carried out typically in unconfined aquifers, with few in confined aquifers. This study focused on the groundwater dynamics in confined aquifers with seasonally sinusoidally fluctuated inland groundwater head and constant sea level by numerical simulations. It is known that the mixing zone (MZ) of saltwater wedge in response to the seasonal oscillations of inland groundwater head swings around the steady-state MZ. However, our simulation results indicate that even the most landward freshwater-saltwater interface over a year is seaward from the steady-state location when the hydraulic conductivity K is ≤10⁻⁴ m/s under certain boundary conditions with given parameter values. That is, seasonal oscillations of inland groundwater head may reduce seawater intrusion in confined coastal aquifers when K ≤ 10⁻⁴ m/s. Sensitivity analysis indicates that for aquifers of K ≤ 10⁻⁴ m/s, the larger the inland head fluctuation amplitude is, the less the seawater intrudes. This is probably due to the reason that the seawater intrusion time decreases with the increase of fluctuation amplitude when K ≤ 10⁻⁴ m/s. Numerical simulations demonstrate that seasonal inland groundwater head oscillations promote the annual averaged recirculated seawater discharge across the seaward boundary.     

Effect of a Freshwater Layer Overlying Salt Water on the Regime of Replacement in Confined Coastal Aquifers

A mathematical model of fresh groundwater flow from a semi-infinite confined aquifer into a sea (pool, trench, and the like) filled with salt water and having a freshwater layer above its horizon. To study this problem a mixed boundary-value problem of the theory of analytical functions is formulated and solved with the use of the Polubarinova-Kochina method. The obtained exact analytical relationships and numerical calculations are used to perform a detailed hydrodynamic analysis of the effect of the freshwater layer and other physical parameters of the model on the character and the extent of displacement.     

Impact of Sea-Level Rise on Sea Water Intrusion in Coastal Aquifers

Despite its purported importance, previous studies of the influence of sea-level rise on coastal aquifers have focused on specific sites, and a generalized systematic analysis of the general case of the sea water intrusion response to sea-level rise has not been reported. In this study, a simple conceptual framework is used to provide a first-order assessment of sea water intrusion changes in coastal unconfined aquifers in response to sea-level rise. Two conceptual models are tested: (1) flux-controlled systems, in which ground water discharge to the sea is persistent despite changes in sea level, and (2) head-controlled systems, whereby ground water abstractions or surface features maintain the head condition in the aquifer despite sea-level changes. The conceptualization assumes steady-state conditions, a sharp interface sea water-fresh water transition zone, homogeneous and isotropic aquifer properties, and constant recharge. In the case of constant flux conditions, the upper limit for sea water intrusion due to sea-level rise (up to 1.5 m is tested) is no greater than 50 m for typical values of recharge, hydraulic conductivity, and aquifer depth. This is in striking contrast to the constant head cases, in which the magnitude of salt water toe migration is on the order of hundreds of meters to several kilometers for the same sea-level rise. This study has highlighted the importance of inland boundary conditions on the sea-level rise impact. It identifies combinations of hydrogeologic parameters that control whether large or small salt water toe migration will occur for any given change in a hydrogeologic variable.     

Numerical Modeling of Emulsified Oil Distribution in Heterogeneous Aquifers

In situ anaerobic bioremediation using edible oil emulsions will be most effective if the oil droplets can be brought into close contact with the contaminant to be treated. However, uniformly distributing oil in heterogeneous aquifers can be difficult. The impact of injection conditions on emulsion distribution in a three-dimensional heterogeneous aquifer is examined using MODFLOW and RT3D. Emulsion retention is simulated using a rate-limited Langmuir isotherm. Volume and flow contact efficiency are shown to be functions of mass of oil injected, injection fluid volume, well spacing, and injection sequence. Regression equations are developed relating dimensionless scaling factors to expected contact efficiency for area treatment and barriers. Cleanup time for uncontacted zones is estimated using a mobile-immobile zone modeling approach.     

Multiphase Modeling of Geologic Carbon Sequestration in Saline Aquifers

Geologic carbon sequestration (GCS) is being considered as a climate change mitigation option in many future energy scenarios. Mathematical modeling is routinely used to predict subsurface CO₂ and resident brine migration for the design of injection operations, to demonstrate the permanence of CO₂ storage, and to show that other subsurface resources will not be degraded. Many processes impact the migration of CO₂ and brine, including multiphase flow dynamics, geochemistry, and geomechanics, along with the spatial distribution of parameters such as porosity and permeability. In this article, we review a set of multiphase modeling approaches with different levels of conceptual complexity that have been used to model GCS. Model complexity ranges from coupled multiprocess models to simplified vertical equilibrium (VE) models and macroscopic invasion percolation models. The goal of this article is to give a framework of conceptual model complexity, and to show the types of modeling approaches that have been used to address specific GCS questions. Application of the modeling approaches is shown using five ongoing or proposed CO₂ injection sites. For the selected sites, the majority of GCS models follow a simplified multiphase approach, especially for questions related to injection and local‐scale heterogeneity. Coupled multiprocess models are only applied in one case where geomechanics have a strong impact on the flow. Owing to their computational efficiency, VE models tend to be applied at large scales. A macroscopic invasion percolation approach was used to predict the CO₂ migration at one site to examine details of CO₂ migration under the caprock.     

Electrical Resistivity Imaging and the Saline Water Interface in High-Quality Coastal Aquifers

Population growth and changing climate continue to impact on the availability of natural resources. Urbanization of vulnerable coastal margins can place serious demands on shallow groundwater. Here, groundwater management requires definition of coastal hydrogeology, particularly the seawater interface. Electrical resistivity imaging (ERI) appears to be ideally suited for this purpose. We investigate challenges and drivers for successful electrical resistivity imaging with field and synthetic experiments. Two decades of seawater intrusion monitoring provide a basis for creating a geo-electrical model suitable for demonstrating the significance of acquisition and inversion parameters on resistivity imaging outcomes. A key observation is that resistivity imaging with combinations of electrode arrays that include dipole–dipole quadrupoles can be configured to illuminate consequential elements of coastal hydrogeology. We extend our analysis of ERI to include a diverse set of hydrogeological settings along more than 100 km of the coastal margin passing the city of Perth, Western Australia. Of particular importance are settings with: (1) a classic seawater wedge in an unconfined aquifer, (2) a shallow unconfined aquifer over an impermeable substrate, and (3) a shallow multi-tiered aquifer system over a conductive impermeable substrate. We also demonstrate a systematic increase in the landward extent of the seawater wedge at sites located progressively closer to the highly urbanized center of Perth. Based on field and synthetic ERI experiments from a broad range of hydrogeological settings, we tabulate current challenges and future directions for this technology. Our research contributes to resolving the globally significant challenge of managing seawater intrusion at vulnerable coastal margins.     

Analytical Design Curves to Maximize Pumping or Minimize Injection in Coastal Aquifers

Explicit algebraic equations are derived to determine approximate maximum pumping rates or minimum injection rates to limit sea water intrusion to a prespecified distance from the coastline. The equations are based on Strack's (1976) single-potential solution. The maximum pumping rates and minimum injection rates applied at wells with uniform spacing to control the inland movement of the fresh water-salt water interface in a coastal aquifer could be calculated from Strack's (1976) solution without the need of a numerical optimization algorithm. When wells are distributed in a simple fashion, the maximum intrusion location can be identified precisely for pumping cases and approximately for injection cases. For pumping cases, critical points are the limit of allowable salt water intrusion, whereas no such limit exists for injection cases. Once an application site is identified, a series of design curves for pumping and injection rates can be developed for arbitrary intrusion limits. When a user is interested only in the largest pumping rates associated with critical points, one design curve can yield complete information.     

Review of Modeling Approaches to Groundwater Flow in Deformed Carbonate Aquifers

We discuss techniques to represent groundwater flow in carbonate aquifers using the three existing modeling approaches: equivalent porous medium, conduit network, and discrete fracture network. Fractures in faulted stratigraphic successions are characterized by dominant sets of sub-vertical joints. Grid rotation is recommended using the equivalent porous medium to match higher hydraulic conductivity with the dominant orientation of the joints. Modeling carbonate faults with throws greater than approximately 100 m is more challenging. Such faults are characterized by combined conduit-barrier behavior. The barrier behavior can be modeled using the Horizontal Flow Barrier Package with a low-permeability vertical barrier inserted to represent the impediment of horizontal flow in faults characterized by sharp drops of the piezometric surface. Cavities can occur parallel to the strike of normal faults generating channels for the groundwater. In this case, flow models need to account for turbulence using a conduit network approach. Channels need to be embedded in an equivalent porous medium due to cavities a few centimeters large, which are present in carbonate aquifers even in areas characterized by low hydraulic gradients. Discrete fracture network modeling enables representation of individual rock discontinuities in three dimensions. This approach is used in non-heavily karstified aquifers at industrial sites and was recently combined with the equivalent porous medium to simulate diffusivity in the matrix. Following this review, we recommend that the future research combines three practiced modeling approaches: equivalent porous medium, discrete fracture network, and conduit network, in order to capture structural and flow aspects in the modeling of groundwater in carbonate rocks.     

Reliable Monitoring of the Transition Zone Between Fresh and Saline Waters in Coastal Aquifers

This study deals with the reliability of monitoring the transition zone between fresh and saline waters in coastal aquifers, considering the effect of tides in long‐perforated boreholes. Electric conductivity (EC) fluctuations in the coastal aquifer of Israel, as measured in long‐perforated borehole, were found to have the same periodicities as the sea tide, though some orders of magnitude larger than sea‐level or groundwater level fluctuations. Direct measurements in the aquifer through buried EC sensors demonstrate that EC measurements within the long‐perforated boreholes might be distorted due to vertical flow in the boreholes, whereas actual fluctuations of the transition zone within the aquifer are some orders of magnitude smaller. Considering these field data, we suggest that monitoring of the transition zone between fresh and saline water adjacent to the sea through long‐perforated boreholes is unreliable. EC fluctuations in short‐perforated boreholes (1 m perforation at the upper part of the transition zone) were somewhat larger than in the aquifer, but much smaller than those in the long‐perforated borehole. The short‐perforation diminishes the vertical flow and the distortion and therefore is more reliable for monitoring the transition zone in the shoreline vicinity.