Experimental study on the tremolite-pargasite join at variable temperatures under 10 kbar

The join tremolite (Tr)-pargasite (Pa) was studied at temperatures between 800 and 1150°C under water vapour pressure of 10 kbar. The results show a continuous solid solution of amphibole between the composition Tr₈₀Pa₂₀ and Pa₁₀₀ at 800°C and 10kb. Pargasite melts incongruently and breaks down at high temperature to clinopyroxene+forsterite+spinel+L+V. A single phase amphibole with composition lying between Tr₈₀Pa₂₀ and nearly pure Pa, breaks down to amphibole of different composition plus other phases. The stability fields of amphibole spread toward higher temperature side with increasing pargasite content, and pargasite itself has the widest stability field. At subliquidus, the composition of amphibole coexisting with other phases becomes more pargasitic with increasing temperature. The compositions of liquid, which are formed by partial melting of amphibole of Tr₄₀Pa₆₀ composition (Fo-normative) under water vapour pressure of 10 kbar, are alumina-rich and Qz-normative.     

Experimentally derived thermochemical data for pargasite and reinvestigation of its stability with quartz in the system Na2O–CaO–>MgO–Al2O3–SiO2–H2O

 The stability of pargasite in the presence of excess quartz has been determined in the range of 0.5–6.0 kbar and 500–950 °C in the system Na₂O– CaO–MgO–Al₂O₃–SiO₂–H₂O, using synthetic minerals. The experimental results from this study indicate the presence of two distinct mineral assemblage regions: (1) a high temperature supersolidus region containing tremolitic amphibole+melt+quartz; (b) a low temperature subsolidus region consisting of Al-rich amphibole+plagioclase+enstatite+quartz. Compositional reversals have been determined for the following three equilibria: (a) 2 pargasite+9 quartz=tremolite+4 plagioclase (An₅₀)+1.5 enstatite+H₂O, (b) 2 pargasite+10 quartz=tremolite+4 plagioclase (An₅₀)+talc, and (c) pargasite+diopside+5 quartz=tremolite+2 plagioclase (An₅₀). These experiments indicate a continuous change of amphibole composition from pargasite to tremolite with increasing temperature, and an opposite effect with increasing pressure. The third equilibria is used to constrain a site-mixing model for the pargasitic amphiboles, which favor a single-coupled Na^A-Al^T1 site mixing. The thermochemical data for pargasite estimated from the reversal data of the three equilibrium reactions is estimated as for ΔG ⁰ _f ,Pg=−12022.11±5.2 kJ mole^-1, and S ⁰ _Pg=591.7 ±7.9 JK^-1 mole^-1. Received: 31 July 1995/Accepted: 3 June 1996     

Dehydration melting of tonalites. Part II. Composition of melts and solids

 Dehydration melting of tonalitic compositions (phlogopite or biotite-plagioclase-quartz assemblages) is investigated within a temperature range of 700–1000°C and pressure range of 2–15 kbar. The solid reaction products in the case of the phlogopite-plagioclase(An₄₅)-quartz starting material are enstatite, clinopyroxene and potassium feldspar, with amphiboles occurring occasionally. At 12 kbar, zoisite is observed below 800°C, and garnet at 900°C. The reaction products of dehydration melting of the biotite (Ann₅₀)-plagioclase (An₄₅)-quartz assemblage are melt, orthopyroxene, clinopyroxene, amphibole and potassium feldspar. At pressures > 8 kbar and temperatures below 800°C, epidote is also formed. Almandine-rich garnet appears above 10 kbar at temperatures ≥ 750°C. The composition of melts is granitic to granodioritic, hence showing the importance of dehydration melting of tonalites for the formation of granitic melts and granulitic restites at pressure-temperature conditions within the continental crust. The melt compositions plot close to the cotectic line dividing the liquidus surfaces between quartz and potassium feldspar in the haplogranite system at 5 kbar and a _{H 2O} = 1. The composition of the melts changes with the composition of the starting material, temperature and pressure. With increasing temperature, the melt becomes enriched in Al₂O₃ and FeO+MgO. Potash in the melt is highest just when biotite disappears. The amount of CaO decreases up to 900°C at 5 kbar whereas at higher temperatures it increases as amphibole, clinopyroxene and more An-component dissolve in the melt. The Na₂O content of the melt increases slightly with increase in temperature. The composition of the melt at temperatures > 900°C approaches that of the starting assemblage. The melt fraction varies with composition and proportion of hydrous phases in the starting composition as well as temperature and pressure. With increasing modal biotite from 20 to 30 wt%, the melt proportion increases from 19.8 to 22.3 vol.% (850°C and 5 kbar). With increasing temperature from 800 to 950°C (at 5 kbar), the increase in melt fraction is from 11 to 25.8 vol.%. The effect of pressure on the melt fraction is observed to be relatively small and the melt proportion in the same assemblage decreases at 850°C from 19.8 vol.% at 5 kbar to 15.3 vol.% at 15 kbar. Selected experiments were reversed at 2 and 5 kbar to demonstrate that near equilibrium compositions were obtained in runs of longer duration. Received: 27 December 1995 / Accepted: 7 May 1996     

Experimentelle Bestimmung der P-T-Stabilitätsbereiche in der Mischkristallreihe Tremolit-Tschermakit

The join tremolite (Tr)—tschermakite (Ts) was studied at temperatures of 450 to 900° C under water vapour pressure of 2 kbar. Solid solution between the end members is restricted to composition range Tr₁₀₀-Tr₄₅. Reconnaissance runs at 800°C and 10 kbar indicated that no further substitution of Al in the tremolite structure is possible by an increase of pressure. In the composition range Ts₅₅-Ts₁₀₀ tremolite-tschermakite solid solution Tr₄₅Ts₅₅ is formed with anorthite, forsterite and enstatite above 700°C and with anorthite and chlorite below 700° C. No amphibole could be synthezised from a material of composition Ts₁₀₀. Materials of composition Ts₁₀₀ crystallized to anorthite, enstatite and frosterite above 700°C and to anorthite and chlorite below 700°C. The high temperature breakdown curve for tremolite-tschermakite solid solutions drops from 870°C for pure tremolite to 826°C for Tr₄₅Ts₅₅. Additional experiments at 1 and 3 kbar indicate that the pressure effect on breakdown temperatures amounts to about 35°C/kbar. The formation of natural amphiboles belonging to the tremolite-tschermakite series is discussed in the light of the experimental data.     

Separate or shared metamorphic histories of eclogites and surrounding rocks? An example from the Bohemian Massif

Eclogite boudins occur within an orthogneiss sheet enclosed in a Barrovian metapelite‐dominated volcano‐sedimentary sequence within the Velké Vrbno unit, NE Bohemian Massif. A metamorphic and lithological break defines the base of the eclogite‐bearing orthogneiss nappe, with a structurally lower sequence without eclogite exposed in a tectonic window. The typical assemblage of the structurally upper metapelites is garnet–staurolite–kyanite–biotite–plagioclase–muscovite–quartz–ilmenite ± rutile ± silli‐manite and prograde‐zoned garnet includes chloritoid–chlorite–paragonite–margarite, staurolite–chlorite–paragonite–margarite and kyanite–chlorite–rutile. In pseudosection modelling in the system Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (NCKFMASH) using THERMOCALC, the prograde path crosses the discontinuous reaction chloritoid + margarite = chlorite + garnet + staurolite + paragonite (with muscovite + quartz + H₂O) at 9.5 kbar and 570 °C and the metamorphic peak is reached at 11 kbar and 640 °C. Decompression through about 7 kbar is indicated by sillimanite and biotite growing at the expense of garnet. In the tectonic window, the structurally lower metapelites (garnet–staurolite–biotite–muscovite–quartz ± plagioclase ± sillimanite ± kyanite) and amphibolites (garnet–amphibole–plagioclase ± epidote) indicate a metamorphic peak of 10 kbar at 620 °C and 11 kbar and 610–660 °C, respectively, that is consistent with the other metapelites. The eclogites are composed of garnet, omphacite relicts (jadeite = 33%) within plagioclase–clinopyroxene symplectites, epidote and late amphibole–plagioclase domains. Garnet commonly includes rutile–quartz–epidote ± clinopyroxene (jadeite = 43%) ± magnetite ± amphibole and its growth zoning is compatible in the pseudosection with burial under H₂O‐undersaturated conditions to 18 kbar and 680 °C. Plagioclase + amphibole replaces garnet within foliated boudin margins and results in the assemblage epidote–amphibole–plagioclase indicating that decompression occurred under decreasing temperature into garnet‐free epidote–amphibolite facies conditions. The prograde path of eclogites and metapelites up to the metamorphic peak cannot be shared, being along different geothermal gradients, of about 11 and 17 °C km^?1, respectively, to metamorphic pressure peaks that are 6–7 kbar apart. The eclogite–orthogneiss sheet docked with metapelites at about 11 kbar and 650 °C, and from this depth the exhumation of the pile is shared.     

Experimental determination of pargasite stability relations in the presence of orthopyroxene

The stability and partial melting of synthetic pargasite in the presence of enstatitic orthopyroxene (opx), forsterite, diopsidic clinopyroxene (cpx), plagioclase (An₅₀), and water has been studied in the range of 0.4–6.0 kb and 750–1000°C in the system Na₂O-CaO-MgO-Al₂O₃-SiO₂-H₂O with a fixed bulk composition of pargasite+5 opx. The addition of orthopyroxene effectively reduces the stability field of pargasite by approximately 200°C at 1 kb. The invariant point involving pargasite coexisting with water-saturated liquid and anhydrous phase shifts from about 0.85 kb and 1025°C to 2.5±0.5 kb and 925±25°C with the addition of opx. Based on the solidus mineral assemblage and direct chemical analysis of quenched glass, the vapor-saturated liquid has a composition close to that of intermediate plagioclase. A layered silicate, interpreted to be Na-phlogopite, has an upper-thermal stability that nearly equals that of pargasite in the field of partial melting and coexists with liquid, pargasite, cpx, and forsterite at 6 kb, 1000°C. These results support the hypothesis that mantle metasomatism could involve formation of pargasitic amphibole from a silicate melt at depths as shallow as 8–10 km.     

The P–T–X(fluid) evolution of meta‐anorthosites in the Eastern Granulites,Tanzania

Meta‐anorthosite bodies are typical constituents of the Neoproterozoic Eastern Granulites in Tanzania. The mineral assemblage (and accessory components) is made up of clinopyroxene, garnet, amphibole; scapolite, epidote, biotite, rutile, titanite, ilmenite and quartz. Within the feldspar‐rich matrix (70–90% plagioclase), mafic domains with metamorphic corona textures were used for P–T calculations. Central parts of these textures constitute high‐Al clinopyroxene – which is a common magmatic mineral in anorthosites – and is therefore assumed to be a magmatic relict. The clinopyroxene rims have a diopsidic composition and are surrounded by a garnet corona. Locally the pyroxene is surrounded by amphibole and scapolite suggesting that a mixed CO₂–H₂O fluid was present during their formation. Thermobarometric calculations give the following conditions for the metamorphic peak of the individual meta‐anorthosite bodies: Mwega: 11–13 kbar, 850–900 °C; Pare Mountains: 12–14 kbar, 850–900 °C; Uluguru Mountains: 12–14 kbar, 850–900 °C. The P–T evolution of these bodies was modelled using pseudosections. The amount and composition of the metamorphic fluid and <0.5 mol.% fluid in the bulk composition is sufficient to produce fluid‐saturated assemblages at 10 kbar and 800 °C. Pseudosection analysis shows that the corona textures most likely formed under fluid undersaturated conditions or close to the boundary of fluid saturation. The stabilities of garnet and amphibole are dependent on the amount of fluid present during their formation. Mode isopleths of these minerals change their geometry drastically between fluid‐saturated and fluid‐undersaturated assemblages. The garnet coronae developed during isobaric cooling following the metamorphic peak. The cooling segment is followed by decompression as indicated by the growth of amphibole and plagioclase. The estimated of the metamorphic fluid is ～0.3–0.5. Although the meta‐anorthosites have different formation ages (Archean and Proterozoic) they experienced the same Pan‐African metamorphic overprint with a retrograde isobaric cooling path. Similar P–T evolutionary paths are known from the hosting granulites. The presented data are best explained by a tectonic model of hot fold nappes that brought the different aged anorthosites and surrounding rocks together in the deep crust followed by an isobaric cooling history.     

Dehydration melting of tonalites. Part I. Beginning of melting

 The beginning of dehydration melting in the tonalite system (biotite-plagioclase-quartz) is investigated in the pressure range of 2–12 kbar. A special method consisting of surrounding a crystal of natural plagioclase (An₄₅) with a biotite-quartz mixture, and observing reactions at the plagioclase margin was employed for precise determination of the solidus for dehydration melting. The beginning of dehydration melting was worked out at 5 kbar for a range of compositions of biotite varying from iron-free phlogopite to iron-rich Ann₇₀, with and without titanium, fluorine and extra aluminium in the biotite. The dehydration melting of phlogopite + plagioclase (An₄₅) + quartz begins between 750 and 770°C at pressures of 2 and 5 kbar, at approximately 740°C at 8 kbar and between 700 and 730°C at 10 kbar. At 12 kbar, the first melts are observed at temperatures as low as 700°C. The data indicate an almost vertical dehydration melting solidus curve at low pressures which bends backward to lower temperatures at higher pressures (> 5 kbar). The new phases observed at pressures ≤ 10 kbar are melt + enstatite + clinopyroxene + potassium feldspar ± amphibole. In addition to these, zoisite was also observed at 12 kbar. With increasing temperature, phlogopite becomes enriched in aluminium and deficient in potassium. Substitution of octahedral magnesium by aluminium and titanium in the phlogopite, as well as substitution of hydroxyl by fluorine, have little effect on the beginning of dehydration melting temperatures in this system. The dehydration melting of biotite (Ann₅₀) + plagioclase (An₄₅) + quartz begins 50°C below that of phlogopite bearing starting composition. Solid reaction products are orthopyroxene + clinopyroxene + potassium feldspar ± amphibole. Epidote was also observed above 8 kbar, and garnet at 12 kbar (750°C). The experiments on the iron-bearing system performed at ≤ 5 kbar were buffered with NiNiO. The f _{O 2} in high pressure runs lies close to CoCoO. With the substitution of octahedral magnesium and iron by aluminium and titanium, and replacement of hydroxyl by fluorine in biotite, the beginning of dehydration melting temperatures in this system increase up to 780°C at 5 kbar, which is 70°C above the beginning of dehydration melting of the assemblage containing biotite (Ann₅₀) of ideal composition. The dehydration melting at 5 kbar in the more iron-rich Ann₇₀-bearing starting composition begins at 730°C, and in the Ann₂₅-bearing assemblage at 710°C. This indicates that quartz-biotite-plagioclase assemblages with intermediate compositions of biotite (Ann₂₅ and Ann₅₀) melt at lower temperatures as compared to those containing Fe-richer or Mg-richer biotites. This study shows that the dehydration melting of tonalites may begin at considerably lower temperatures than previously thought, especially at high pressures (>5 kbar). Received: 27 December 1995 / Accepted: 7 May 1996     

Quartz and orthopyroxene exsolution lamellae in clinopyroxene and the metamorphic P–T path of Belomorian eclogites

The Shirokaya Salma eclogite‐bearing complex is located in the Archean–Palaeoproterozoic Belomorian Province (Russia). Its eclogites and eclogitic rocks show multiple clinopyroxene breakdown textures, characterized by quartz–amphibole, orthopyroxene and plagioclase lamellae. Representative samples, a fresh eclogite, two partly retrograded eclogites, and a strongly retrograded eclogitic rock, were collected for this study. Two distinct mineral assemblages—(1) omphacite+garnet+quartz+rutile±amphibole and (2) clinopyroxene+garnet+amphibole+plagioclase+quartz+rutile+ilmenite±orthopyroxene—are described. Based on phase equilibria modelling, these assemblages correspond to the eclogite and granulite facies metamorphism that occurred at 16–18 kbar, 750–800°C and 11–15 kbar, 820–850°C, respectively. The quartz–amphibole lamellae in clinopyroxene formed during retrogression with water ingress, but do not imply UHP metamorphism. The superfine orthopyroxene lamellae developed due to breakdown of an antecedent clinopyroxene (omphacite) during retrogression that was triggered by decompression from the peak of metamorphism, while the coarser orthopyroxene grains and rods formed afterwards. The P–T path reconstructed for the Shirokaya Salma eclogites is comparable to that of the adjacent 1.9 Ga Uzkaya Salma eclogite (Belomorian Province), and those of several other Palaeoproterozoic high‐grade metamorphic terranes worldwide, facts allowing us to debate the exact timing of eclogite facies metamorphism in the Belomorian Province.     

Stability and chemical composition of pargasitic amphibole in MORB pyrolite under upper mantle conditions

The stability field of pargasitic amphibole in a model mantle composition (MORB pyrolite) has been experimentally determined for a fixed water content. A solidus for a pargasite-bearing lherzolite has been defined at pressures below the limit of amphibole stability of 30 kbar at T = 925 °C. The maximum temperature for pargasitic amphibole in MORB pyrolite occurs at 1075 °C between P = 18 and 25 kbar. This maximum lies between that determined for a fertile peridotite composition (Hawaiian pyrolite) and a depleted peridotite composition (Tinaquillo lherzolite). A comparison of the new results with those from earlier studies suggests that the stability for a particular bulk H₂O content is mostly controlled by alkali content of the lherzolite composition. The systematic compositional variation of pargasitic amphibole as a function of pressure and temperature can be represented as an increase of the richterite component with increase in both pressure and temperature. For a given pressure the tschermakite component increases with increasing temperature. The compositions of coexisting clinopyroxenes also show a systematic variation with pressure and temperature. The phase relationships in MORB pyrolite combined with the modal abundance of coexisting phases show that the breakdown reactions of pargasitic amphibole occur continuously throughout the subsolidus region studied. The temperature stability limit of pargasitic amphibole coincides with the water-undersaturated solidus (amphibole-dehydration solidus) at pressures below 30 kbar. The experimental results are applicable to pargasitic amphibole-bearing natural peridotites. Cooling and decompression paths and heating events observed in natural peridotites can be interpreted from changes in the composition of pargasitic amphibole. The data are also applicable to a model for peridotite melting and hydration process in the subduction environment. Received: 27 October 1997 / Accepted: 6 November 1998     

Eclogites in the Makuti gneisses of Zimbabwe: implications for the tectonic evolution of the Zambezi Belt in southern Africa

The gneisses of the Makuti Group in north-west Zimbabwe are characterized by complex geometries that resulted from intense non-coaxial deformation in a crustal scale high-strain zone that accommodated extensional deformation along the axis of the Zambezi Belt at c. 800 Ma. Within low-strain domains in the Makuti gneisses, undeformed metagabbroic lenses preserve eclogite and granulite facies assemblages, which record a part of the metamorphic history that predates Pan-African events. Eclogitic rocks can be subdivided into: (1) corona-textured metagabbros that preserve igneous textures, and (2) garnet–omphacite rocks in which primary textures are destroyed. The lenses of eclogitic rocks are enveloped in a mantle of garnet–clinopyroxene–hornblende gneiss, which is a common rock type in the Makuti gneisses. The eclogites preserve multi-staged, domainal, symplectic reaction textures that developed progressively as the rocks experienced loading followed by decompression–heating. In the metagabbros, the original clinopyroxene, plagioclase and olivine domains acted separately during the peak of metamorphism, with plagioclase being replaced by garnet and kyanite, and olivine being replaced by orthopyroxene and possibly omphacite. The peak assemblage was overprinted by: (1) the multi-mineralic corona assemblage pargasite–orthopyroxene–spinel–plagioclase replacing garnet–kyanite–clinopyroxene (possibly at c. 19 kbar, 760±25 °C); (2) orthopyroxene–pargasite–plagioclase–scapolite coronas replacing orthopyroxene (15±1.5 kbar, 750±50 °C); and (3) moats of orthopyroxene–plagioclase replacing garnet (10±1 kbar, 760±50 °C). The garnet–omphacite rocks record similar peak conditions (15±1.1 kbar, 760±60 °C). Garnet–clinopyroxene–hornblende–plagioclase gneisses envelop the eclogites and record matrix conditions of 11±1.5 kbar at 730±50 °C using assemblages that are oriented in the regional fabric. These rocks are characterized by decompression-heating textures, reflecting temperature increases during exhumation of the Makuti gneisses. The eclogite facies rocks formed during a collisional event prior to 850 Ma. Their formation could be related to a suture zone that developed along the axis of the Zambezi Belt during the formation of Rodinia (between 1400 and 850 Ma). The main deformation-metamorphism in the Makuti gneisses occurred around 800 Ma and involved extension and exhumation of the high-P rocks (break-up of Rodinia), which experienced a high-T metamorphic overprint. Around 550–500 Ma, a collisional event associated with the formation of Gondwana resulted in renewed burial and metamorphic recrystallization of the Makuti gneisses.     

Metamorphism, geochemistry and origin of magnesian volcanic rocks, Klamath Mountains, California

Metabasaltic rocks in the Klamath Mountains of California with ‘komatiitic’ major element concentrations were investigated in order to elucidate the origin of the magnesian signature. Trace-element concentrations preserve relict igneous trends and suggest that the rocks are not komatitic basalts, but immature arc rocks and within-plate alkalic lavas. Correlation of ‘excess’ MgO with the volume per cent hornblende (±clinopyroxene) suggests that the presence of cumulus phases contributes to the MgO-rich compositions. Early submarine alteration produced regional δ¹⁸O values of +10±1.5%_° and shifts in Al₂O₃, Na₂O, and K₂O concentrations. Regional metamorphic grade in the study area varies from biotite-zone greenschist facies (350–550°C, c. 3 kbar) southward to prehnite–actinolite facies (200–400°C, ≤3 kbar), but little isotopic or elemental change occurred during the regional recrystallization. The greenschist facies assemblage is actinolitic hornblende + phengite + epidote + sodic plagioclase + microcline + chlorite + titanite + hematite + quartz in Ti-poor metabasaltic rocks; in addition to these phases biotite is present in Ti-rich analogues. Lower grade greenstones contain prehnite and more nearly stoichiometric actinolite. The moderate to low pressures of regional metamorphism are compatible with P–T conditions in a magmatic arc. Later contact metamorphism at 2–2.9±0.5 kbar and at peak temperatures approaching 600° C around the English Peak and Russian Peak granodiorites produced 3–4–km-wide aureoles typified by gradual, systematic increases in the pargasite content of amphibole, muscovite content of potassic white mica, and anorthite content of plagioclase compositions. Metasomatism during contact metamorphism produced further increases in bulk-rock δ¹⁸O_SMOW of as much as +6%_°. Thus, the unusually MgO-rich nature of the Sawyers Bar rocks may be attributed at least partly to metasomatism and the presence of magnesian cumulus phases.     

Formation of clinopyroxene + spinel and amphibole + spinel symplectites in coronitic gabbros from the Sierra de San Luis (Argentina): a key to post-magmatic evolution

The El Arenal metagabbros preserve coronitic shells of orthopyroxene ± Fe‐oxide around olivine, as well as three different types of symplectite consisting of amphibole + spinel, clinopyroxene + spinel and, more rarely, orthopyroxene + spinel. The textural features of the metagabbros can be explained by the breakdown of the olivine + plagioclase pair, producing orthopyroxene coronas and clinopyroxene + spinel symplectites, followed by the formation of amphibole + spinel symplectites, reflecting a decrease in temperature and, possibly, an increase in water activity with respect to the previous stage. The metagabbros underwent a complex P–T history consisting of an igneous stage followed by cooling in granulite, amphibolite and greenschist facies conditions. Although the P–T conditions of emplacement of the igneous protolith are still doubtful, the magmatic assemblage suggests that igneous crystallization occurred at a pressure lower than 6 kbar and at 900–1100 °C. Granulitic P–T conditions have been estimated at about 900 °C and 7–8 kbar combining conventional thermobarometry and pseudosection analysis. Pseudosection calculation has also shown that the formation of the amphibole + spinel symplectite could have been favoured by an increase in water activity during the amphibolite stage, as the temperature of formation of this symplectite strongly depends on aH₂O (<740 °C for aH₂O = 0.5; <790 °C for aH₂O = 1). Furthermore, but not pervasive, re‐equilibration under greenschist facies P–T conditions is documented by retrograde epidote and chlorite. The resulting counterclockwise P–T path consists of progressive, nearly isobaric cooling from the igneous stage down to the granulite, amphibolite and greenschist stage.     

The partitioning of copper between silicate melts and two-phase aqueous fluids: An experimental investigation at 1 kbar, 800° C and 0.5 kbar, 850° C

 Experiments were performed in the three phase system high-silica rhyolite melt+low-salinity aqueous vapor+hydrosaline brine, to investigate the partitioning equilibria for copper in magmatic-hydrothermal systems at 800° C and 1 kbar, and 850° C and 0.5 kbar. D^aqm/mlt _Cu and apparent equilibrium constants, K^aqm/mlt _Cu,Na, between the aqueous mixture (aqm=quenched vapor+brine) and the silicate melt (mlt) are calculated. D^aqm/mlt _Cu increases with increasing aqueous chloride concentration and is a function of pressure. K^aqm/mlt _Cu,Na=215(±73) at 1 kbar and 800° C and K^aqm/mlt _Cu,Na=11(±6) at 0.5 kbar and 850°C. Decreasing pressure from 1 to 0.5 kbar lowers K^aqm/mlt _Cu,Na by a factor of approximately 20. Data revealed no difference in K^aqm/mlt _Cu,Na or D^aqm/mlt _Cu as a function of the melt aluminium saturation index. Within the 2-phase field the K^aqm/mlt _Cu,Na show no variation with total aqueous chloride, indicating that copper-sodium exchange between the vapor, brine and silicate melt is independent of the mass proportion of vapor and brine. Model copper-sodium apparent equilibrium constants for the hydrosaline brine and the silicate melt revealed a negative dependence on pressure. Model apparent equilibrium constants for copper-sodium exchange between the brine and vapor were close to unity at 1 kbar and 800° C. Received: 27 June 1994/Accepted: 30 March 1995     

Metamorphic evolution of diamond-bearing and associated rocks from the Kokchetav Massif, northern Kazakhstan

Representative diamond-bearing gneisses and dolomitic marble, eclogite and Ti-clinohumite-bearing garnet peridotite from Unit I at Kumdy Kol and whiteschist from Unit II at Kulet, eastern Kokchetav Massif, northern Kazakhstan, were studied. Diamond-bearing gneisses contain variable assemblages, including Grt+Bt+Qtz±Pl±Kfs±Zo±Chl±Tur±Cal and minor Ap, Rt and Zrn; abundant inclusions of diamond, graphite+chlorite (or calcite), phengite, clinopyroxene, K-feldspar, biotite, rutile, titanite, calcite and zircon occur in garnet. Diamond-bearing dolomitic marbles consist of Dol+Di±Grt+Phl; inclusions of diamond, dolomite±graphite, biotite, and clinopyroxene were identified in garnet. Whiteschists carry the assemblage Ky+Tlc+Grt+Rt; garnet shows compositional zoning, and contains abundant inclusions of talc, kyanite and rutile with minor phlogopite, chlorite, margarite and zoisite. Inclusions and zoning patterns of garnet delineate the prograde P–T path. Inclusions of quartz pseudomorphs after coesite were identified in garnet from both eclogite and gneiss. Other ultrahigh-pressure (UHP) indicators include Na-bearing garnet (up to 0.14 wt% Na₂O) with omphacitic Cpx in eclogite, occurrence of high-K diopside (up to 1.56 wt% K₂O) and phlogopite in diamond-bearing dolomitic marble, and Cr-bearing kyanite in whiteschist. These UHP rocks exhibit at least three stages of metamorphic recrystallization. The Fe-Mg partitioning between clinopyroxene and garnet yields a peak temperature of 800–1000 °C at P >40 kbar for diamond-bearing rocks, and about 740–780 °C at >28–35 kbar for eclogite, whiteschist and Ti-bearing garnet peridotite. The formation of symplectitic plagioclase+amphibole after clinopyroxene, and replacement of garnet by biotite, amphibole, or plagioclase mark retrograde amphibolite facies recrystallization at 650–680 °C and pressure less than about 10 kbar. The exsolution of calcite from dolomite, and development of matrix chlorite and actinolite imply an even lower grade greenschist facies overprint at c. 420 °C and 2–3 kbar. A clockwise P–T path suggests that supracrustal sediments together with basaltic and ultramafic lenses apparently were subjected to UHP subduction-zone metamorphism within the diamond stability field. Tectonic mixing may have occurred prior to UHP metamorphism at mantle depths. During subsequent exhumation and juxtaposition of many other tectonic units, intense deformation chaotically mixed and mylonitized these lithotectonic assemblages.     

High-pressure eclogites in northern Jiangsu – southern Shandong province, eastern China

Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO₂ phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO₂ phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe₂O₃) and Cr₂O₃ compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile. Pargasitic and taramitic amphiboles, calcic plagioclase (An₆₈), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P > 26 kbar and T= 500–750°C in the western part to P > 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P < 10 kbar and T < 580°C) to east (P > 9 kbar and T > 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.     

Diffusion-controlled olivine corona textures in granitic rocks from Lofoten, Norway: calculation of Onsager diffusion coefficients, thermodynamic modelling and petrological implications

Reactions occurring during cooling of charnockitic intrusives on the Lofoten Islands produce characteristic diffusion-controlled textures around fayalite and Fe–Ti oxides. Thermobarometry indicates the corona textures formed at 780–840 °C and pressures of 4–10 kbar, whereas the magmatic assemblage of the charnockite (clinopyroxene–olivine–quartz) crystallized at about 850–870 °C and 4 kbar. The succession olivine|orthopyroxene+magnetite|orthopyroxene+garnet and olivine|orthopyroxene+magnetite|amphibole developed where olivine reacted with adjacent plagioclase or K-feldspar, but the modes and the thicknesses of the corona textures vary according to the feldspar type, indicating that the primary magmatic ternary feldspar was already exsolved into albitic plagioclase and alkali feldspar when the corona formation began. Simultaneously, in other parts of the rock, primary magmatic clinopyroxene reacted to amphibole and Fe–Ti oxides reacted to orthopyroxene+garnet coronas or to amphibole. Textures demonstrate significant Al diffusion in the rocks under granulite facies conditions and they suggest that no pervasive fluid influx occurred and that amphibole formation was dependant on a local source of H₂O probably related to water-release during the last stages of magmatism. Calculation of the net reaction by accounting for all observed reactions at different sites in the rock indicates that the system can be regarded as balanced on a hand-specimen scale with respect to all elements except for Na and H₂O. The larger variety of textures developed in rocks of granitic bulk composition provide more constraints than textures from gabbroic compositions, and permitted calculation of a set of relative diffusion coefficients which also reproduce textures in the gabbroic and anorthositic rocks from the Lofoten Islands. The following set of relative diffusion coefficients (L_i/L_Fe) reproduces the observed textures in the Lofoten rocks: Si=0.82, Mg=0.59, Mn=0.05, Na=0.38, K=0.39, Al=0.05 and Ca=0.07.     

Sodium-rich metasomatism in the upper mantle: Implications of experiments on the pyrolite-Na2O-rich fluid system at 950°C, 20 kbar

Sodium-rich metasomatism in the upper levels of the mantle has been modelled by reacting pyrolite with alkali-bearing H₂O fluids containing minor CO₂ and concentrations of Na₂O and Na₂O + K₂O (K/K + Na = 0.1 ) up to 4.0 g alkalies/10 g H₂O at 20 kbar and 950°C. With increasing alkali concentration, the amounts of amphibole (pargasite-edenite) and olivine increase as orthopyroxene and clinopyroxene decrease. Amphiboles show progressive increases in Na (and K) and Si concentrations and decreases in Al and Ca concentrations suggesting the dominant substitution mechanism is (Na, K) + SiAl + Ca. These results and least squares mass balance calculations suggest the reaction of clinopyroxene + orthopyroxene + spinel produces amphibole + olivine.In nature, upper mantle spinel lherzolite is commonly veined by a variety of rock types which may contain Ti-pargasite as a magmatic crystallization product. Pargasite-edenite occurs interstitially in spinel Iherzolite, often spatially related to Ti-pargasite and may be produced by hydrous fluids evolved during late stage crystallization of the veined rocks. This is supported by the close compositional correlation between the natural pargasite-edenite amphiboles and those produced in this study.The present study suggests that up to 43 wt.% amphibole may be accommodated in pyrolite in the presence of Na₂O-rich H₂O-CO₂ fluids. This represents 0.8 wt.% H₂O and 1.7 wt.% Na₂O in the hydrated pyrolite composition and indicates the importance of sodium in determining the extent of metasomatism. Sodium also lowers the solidus temperature of pyrolite by more than 50°C over the H₂O-saturated pyrolite system at 20 kbar.     

Constraining the P–T path of a MORB-type eclogite using pseudosections, garnet zoning and garnet-clinopyroxene thermometry: an example from the Bohemian Massif

A mid‐ocean ridge basalt (MORB)‐type eclogite from the Moldanubian domain in the Bohemian Massif retains evidence of its prograde path in the form of inclusions of hornblende, plagioclase, clinopyroxene, titanite, ilmenite and rutile preserved in zoned garnet. Prograde zoning involves a flat grossular core followed by a grossular spike and decrease at the rim, whereas Fe/(Fe + Mg) is also flat in the core and then decreases at the rim. In a pseudosection for H₂O‐saturated conditions, garnet with such a zoning grows along an isothermal burial path at c. 750 °C from 10 kbar in the assemblage plagioclase‐hornblende‐diopsidic clinopyroxene‐quartz, then in hornblende‐diopsidic clinopyroxene‐quartz, and ends its growth at 17–18 kbar. From this point, there is no pseudosection‐based information on further increase in pressure or temperature. Then, with garnet‐clinopyroxene thermometry, the focus is on the dependence on, and the uncertainties stemming from the unknown Fe³⁺ content in clinopyroxene. Assuming no Fe³⁺ in the clinopyroxene gives a serious and unwarranted upward bias to calculated temperatures. A Fe³⁺‐contributed uncertainty of ±40 °C combined with a calibration and other uncertainties gives a peak temperature of 760 ± 90 °C at 18 kbar, consistent with no further heating following burial to eclogite facies conditions. Further pseudosection modelling suggests that decompression to c. 12 kbar occurred essentially isothermally from the metamorphic peak under H₂O‐undersaturated conditions (c. 1.3 mol.% H₂O) that allowed the preservation of the majority of garnet with symplectitic as well as relict clinopyroxene. The modelling also shows that a MORB‐type eclogite decompressed to c. 8 kbar ends as an amphibolite if it is H₂O saturated, but if it is H₂O‐undersaturated it contains assemblages with orthopyroxene. Increasing H₂O undersaturation causes an earlier transition to SiO₂ undersaturation on decompression, leading to the appearance of spinel‐bearing assemblages. Granulite facies‐looking overprints of eclogites may develop at amphibolite facies conditions.