Late Cretaceous extension overprinting a steep belt in the Northern Calcareous Alps (Schesaplana, R?tikon, Switzerland and Austria)

The Triassic to Cretaceous sediment succession of the Lechtal Nappe in the western part of the Northern Calcareous Alps (NCA) has been deformed into large-scale folds and crosscut by thrust and extensional faults during Late Cretaceous (Eoalpine) and Tertiary orogenic processes. The following sequence of deformation is developed from overprinting relations in the field: (D1) NW-vergent folds related to thrusting; (D2) N–S shortening leading to east–west-trending folds and to the formation of a steep belt (Arlberg Steep Zone) along the southern border of the NCA; (D3) E–W to NE–SW extension and vertical shortening, leading to low-angle normal faulting and recumbent “collapse folds” like the Wildberg Syncline. D1 and D2 are Cretaceous in age and predate the Eocene emplacement of the Austroalpine on the Penninic Nappes along the Austroalpine basal thrust; the same is probably true for D3. Finally, the basal thrust was deformed by folds related to out-of-sequence thrusting. These results suggest that the NCA were at least partly in a state of extension during the sedimentation of the Gosau Group in the Late Cretaceous.     

The transition from passive to active margin tectonics: a case study from the zone of Samedan (eastern Switzerland)

The Zone of Samedan is part of a fossil, early Mesozoic rift system originally situated in the distal, Lower Austro-Alpine domain of the Adriatic passive continental margin. An early Mesozoic configuration of asymmetrical rift basins bounded by relative structural highs compartmentalized Late Cretaceous active margin tectonics; Jurassic half-grabens were folded into arcuate synclines, whereas relative structural highs engendered thin, imbricated thrust sheets. West-directed thrusting and folding initiated at the surface and continued to depths favoring mylonitization under lower greenschist-facies conditions. At this time Liguria-Piemontese ophiolites were accreted to Lower Austro-Alpine units directly underlying the Zone of Samedan. Late Cretaceous orogenic collapse of the Adriatic active margin involved the reactivation of west-directed thrusts as low-angle, top-to-the-east, normal faults. These faults accommodated extensional uplift of Liguria-Piemontese ophiolites and Lower Austro-Alpine units beneath and within the Zone of Samedan. During Paleogene collision, some Late Cretaceous faults in the Zone of Samedan were reactivated under lower anchizonal conditions as north-directed thrusts. The latter stages of this early Tertiary thickening were transitional to brittle, high-angle normal faulting associated with top-to-the-east extension and spreading above the warm, uplifting Lepontine dome.     

On the mechanics of basin formation in the Pannonian basin: Inferences from analogue and numerical modelling

We present the results of a thrust fault reactivation study that has been carried out using analogue (sandbox) and numerical modelling techniques. The basement of the Pannonian basin is built up of Cretaceous nappe piles. Reactivation of these compressional structures and connected weakness zones is one of the prime agents governing Miocene formation and Quaternary deformation of the basin system. However, reactivation on thrust fault planes (average dip of ca. 30°) in normal or transtensional stress regimes is a problematic process in terms of rock mechanics. The aim of the investigation was to analyse how the different stress regimes (extension or strike-slip), and the geometrical as well as the mechanical parameters (dip and strike of the faults, frictional coefficients) effect the reactivation potential of pre-existing faults.

Results of analogue modelling predict that thrust fault reactivation under pure extension is possible for fault dip angle larger than 45° with normal friction value (sand on sand) of the fault plane. By making the fault plane weaker, reactivation is possible down to 35° dip angle. These values are confirmed by the results of numerical modelling. Reactivation in transtensional manner can occur in a broad range of fault dip angle (from 35° to 20°) and strike angle (from 30° to 5° with respect to the direction of compression) when keeping the maximum horizontal stress magnitude approximately three times bigger than the vertical or the minimum horizontal stress values.

Our research focussed on two selected study areas in the Pannonian basin system: the Danube basin and the Derecske trough in its western and eastern part, respectively. Their Miocene tectonic evolution and their fault reactivation pattern show considerable differences. The dominance of pure extension in the Danube basin vs. strike-slip faulting (transtension) in the Derecske trough is interpreted as a consequence of their different geodynamic position in the evolving Pannonian basin system. In addition, orientation of the pre-existing thrust fault systems with respect to the Early to Middle Miocene paleostress fields had a major influence on reactivation kinematics.

As part of the collapsing east Alpine orogen, the area of the Danube basin was characterised by elevated topography and increased crustal thickness during the onset of rifting in the Pannonian basin. Consequently, an excess of gravitational potential energy resulted in extension (σ_v > σ_H) during Early Miocene basin formation. By the time topography and related crustal thickness variation relaxed (Middle Miocene), the stress field had rotated and the minimum horizontal stress axes (σ_h) became perpendicular to the main strike of the thrusts. The high topography and the rotation of σ_h could induce nearly pure extension (dip-slip faulting) along the pre-existing low-angle thrusts. On the contrary, the Derecske trough was situated near the Carpathian subduction belt, with lower crustal thickness and no pronounced topography. This resulted in much lower σ_v value than in the Danube basin. Moreover, the proximity of the retreating subduction slab provided low values of σ_h and the oblique orientation of the paleostress fields with respect to the master faults of the trough. This led to the dominance of strike-slip faulting in combination with extension and basin subsidence (transtension).     

郯庐断裂带的伸展活动及其动力学背景

郯庐断裂带的伸展活动发生于晚白垩世至早第三纪,控制形成了-系列断陷盆地.安徽段的断陷出现在晚白垩世至早第三纪,苏鲁段仅发生于晚白垩世,而山东潍坊以北的断陷皆出现在早第三纪,显示了伸展活动南早北晚的迁移规律.这一伸展活动叠加在前期走滑构造之上,呈现为幕式的正断层运动.现可鉴别出断裂带的伸展活动经历过5次显著的断陷事件.郯庐断裂带的伸展构造多不同于典型的裂谷.它与中国东部同期一系列伸展盆地形成的动力学背景一致,是太平洋板块向西正面高角度俯冲下、中国东部岩石圈上拱中出现的巨型伸展构造.     

Modes of orogen-parallel stretching and extensional exhumation in response to microplate indentation and roll-back subduction (Tauern Window, Eastern Alps)

The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.     

南黄海盆地中部隆起构造特征及其成因机制

通过选取南黄海盆地中部隆起内部地震反射清晰、构造特征明显的典型地震剖面,开展精细的构造解释,系统梳理了南黄海盆地中部隆起的构造样式特征,识别出挤压(滑脱、高角度逆冲、对冲/背冲)、走滑(正花状、y字型)、伸展(铲式正断层)等多种构造组合样式.首次提出在中部隆起内部发育2条NW-SE向走滑断层.在此基础上,结合区域应力场特征和深部地球动力学背景,明确了中部隆起构造样式的发育期次、成因机制和构造演化历程.研究结果表明:(1)滑脱构造主要位于中部隆起北部,滑脱面位于志留系底部的泥页岩.滑脱构造应力机制来源于三叠纪末印支运动时期华北板块与下扬子板块之间的碰撞造山作用;(2)高角度逆冲主要位于中部隆起南部,其应力机制来源于早侏罗世燕山运动早期,古太平洋板块初始高速、低角度NW向俯冲;(3)走滑断层主要表现为具有压扭特征的正花状构造,位于中部隆起东南部、中西部,对应于早白垩世时期,古太平洋板块低角度俯冲由NW向转变为NNW向引起的左旋剪切作用,中国东部郯庐断裂在该时期亦表现为左旋剪切特征;(4)伸展正断表现为铲式正断层特征,发育在中部隆起南北边界,即在中部隆起与南黄海盆地南部坳陷、北部坳陷的接触部...     

Evolution of the Late Cretaceous Dadaepo Basin,SE Korea,in response to oblique subduction of the proto-Pacific (Izanagi/Kula) or Pacific plate

The Dadaepo Basin is a small Late Cretaceous sedimentary basin in SE Korea, located on the eastern margin of Asia. The basin is an isolated extensional basin situated between the NNE-striking Yangsan and Dongnae faults. The basin-fill sediments, named the Dadaepo Formation, consist of channelized conglomerates and sandstones intercalated with dominantly purple mudstones in the lower part. The upper part is dominated by fine- to coarse-grained tuffaceous sandstones and olive to dark gray mudstones with abundant volcanic interbeds. The formation unconformably overlies dacitic rocks dated at ca. 94 Ma and is overlain by basaltic andesite dated at ca. 69 Ma (Ar–Ar ages). The overall configuration of the strata of the Dadaepo Formation indicates syndepositional tilting of the basin floor to the north-northeast. A number of outcrop-scale faults are observed in the basin-fill sediments, of which the majority are NW-striking normal faults, including syndepositional growth faults. The orientations of mafic (magmatic) and clastic dikes, interpreted as being approximately contemporaneous with the deposition of the Dadaepo Formation, are also nearly parallel to the strikes of outcrop-scale normal faults. All these extensional structures consistently indicate NE–SW extension of the basin and obliquely intersect the basin-bounding Yangsan and Dongnae faults at angles of 40°–60°. It is thus concluded that the Dadaepo Formation was deposited in a pull-apart basin that subsided as a result of NNE-striking sinistral strike–slip faulting in the southeastern part of the Korean Peninsula during the Campanian (Late Cretaceous). This strike–slip faulting was related to north-northwestward oblique subduction of the proto-Pacific (Izanagi/Kula) or Pacific plate under the eastern margin of the Eurasian plate.     

皖浙赣相邻区晚中生代多期构造变形特征及其动力学背景

通过详细系统的野外地质调查和构造解析,文中在皖浙赣相邻区识别出晚中生代的五期构造变形。第一期为中侏罗世末到早白垩世初的北东东向逆冲推覆构造,形成时间大约为160~150 Ma;第二期为早白垩世初的高角度正断层和北东东向左行平移断层,形成于150~135 Ma;第三期为早白垩世晚期的北北东向左行平移断层,形成于125~120 Ma;第四期为北东-北东东向右行平移断层,形成于早白垩世末期的100 Ma左右;最后一期为形成于晚白垩世早期(约75 Ma)的北北东向逆冲断层构造。区内晚中生代的多期构造变形与华南和华北板块的最后阶段的碰撞,晚中生代以来太平洋板块在不同阶段向欧亚大陆不同方向的俯冲,甚至与印度板块向北碰撞产生的向东远程挤压效应等诸多作用有关。     

塔里木盆地西南坳陷发现晚新生代伸展构造

通过认真、系统的地震资料解释, 我们在塔里木盆地西南坳陷首次发现晚新生代正断层。 这些正断层发育于西南坳陷的东北部, 走向 NE-SW, 剖面上组合成堑垒构造, 个别剖面上显示负花状构造特征。 正断层主要发育于新生界, 向上断至的最高层位是第四系更新统下部。 倾向相反的正断层向下交汇后断距消失, 断层继续向下延伸的情况不清楚。 根据断距 变化和生长指数计算, 正断层形成于上新世晚期, 持续演化至更新世早期。 正断层的形成演化过程与以往在阿瓦提凹陷、巴楚隆起和塘沽孜巴斯坳陷发现的晚新生代正断层基本一致, 正断层活动时间为 ca. 3～2 Ma。 它们形成于一个区域性弱伸展构造应力场, 代表印度-亚洲碰撞远程效应下, 塔里木盆地脉式挤压冲断过程中的一个构造间歇期。     

丽水-椒江凹陷断裂构造运动学

丽水-椒江凹陷是晚白垩世以来发展起来的大陆边缘裂陷盆地.本文利用平衡剖面技术恢复计算了丽水-椒江凹陷不同构造部位各裂陷伸展期的盆地伸展量、伸展系数和伸展率.研究表明:研究区晚白垩世至古新世裂陷作用具有"幕式"渐进发展的特征,可划分为三个裂陷伸展期:早期(晚白垩世)的断陷主要由相对分散、独立的小断陷组成,控制半地堑凹陷的主断层主要以书斜式(domino-style)为主;中、晚期(古新世)的断陷由相互连通的半地堑凹陷组成,其主干断层以犁状(listric)或坡坪状(ramp-flat)正断层为特征.研究区不同构造部位其水平伸展率不同,表现为水平伸展量由南西向北东由大变小的特征,最大伸展期亦表现为由南西向北东变晚的规律.     

西南三江构造体系及演化、成因

西南三江构造体系突出表现为以昌都-兰坪-思茅地块为中轴的不对称走滑对冲构造,次为与走滑断裂相伴的伸展滑脱、走滑拉分盆地构造体系,再次为块体内部的近北东、北西向走滑断裂系。西南三江造山带构造体系演化分为挤压收缩变形、走滑深熔热隆、走滑剪切伸展、走滑剥蚀隆升等4个阶段。自晚白垩世开始,印度板块与欧亚板块碰撞,西南三江造山带对冲体构造体系初始形成。自渐新世开始,印度板块持续向北楔入欧亚大陆,印度板块与扬子克拉通构成力偶,两者相向、相对运动,挤压与剪切特提斯大洋缝合带及两大陆边缘弧盆系等地质体,西南三江造山带对冲体构造体系进一步发展,近南北向剪切走滑构造体系形成,构造方向也由近东西转为近南北向。而与近南北向主走滑断裂带之相伴的伸展滑脱构造、拉分盆地,块体内部近北东、北西“X”型剪切走滑断裂同时相伴形成。这样,就形成了西南三江造山带大规模的对冲、走滑、旋转及其伴生的伸展、拉分盆地构造的构造体系。     

New insights on the tectonic and paleogeographic evolution of the central Atlasic domain of Tunisia

Geological and geoseismic profiles and well data gathered with field observations from the Atlasic Chain in central Tunisia highlight folded structures, tectonic events, and significant faults. These events controlled basin formation and evolution during successive Mesozoic extensional phases, followed by the tectonic inversion during the Atlasic Orogeny known on a Tethyan scale. The Cretaceous extension is well recorded through deposition, which supplied the normal faults system and influenced sediment distribution and regional subsidence. The major event is the normal slip of the principle inherited fault during the Cretaceous subsidence. The northwestern blocks, which are north of the faults of Mrhila–Trozza–Cherichira and Ballouta and west of the NS axis, correspond to continually subsiding areas of the Upper Cretaceous series. Subsequent faulting reactivated compressional structures such as strike-slips, reverse, and thrust faults during the Tertiary Orogeny which largely affected the Tunisian Atlasic domain. Geological profiles point out the evidence of the Upper Cretaceous emersion of the central Tunisia domain and lateral thickness variation of the series from Jurassic to Quaternary, unconformities, and halokinesis movement.     

青藏铁路风火山段晚第四纪断裂活动分析

地表地质调查发现,第四纪期间在风火山逆冲-褶皱构造带以发生近东西向的伸展变形为特征。在该构造带中形成切割早期近东西向挤压变形构造带、指示近东西向伸展变形、整体沿北60°东向展布的二道沟断陷盆地。断裂活动的地质、地貌证据表明,控制该盆地晚第四纪断陷的主边界断裂位于其北缘,是一条断续延伸达24 km左右、可能兼具左旋走滑性质的正断层。根据该区晚第四纪沉积物的分布和时代,并对断裂所错动的晚第四纪地质-地貌体进行初步的年代学分析,可以初步断定该断裂的晚第四纪垂直活动速率应该介于0.2~0.4 mm/a之间。     

Tertiary age and paleostructural inferences of the eclogitic imprint in the Austroalpine outliers and Zermatt–Saas ophiolite, western Alps

The Austroalpine Sesia-Lanzo inlier and upper Austroalpine Dent Blanche, Mt. Mary and Pillonet outliers occur on top of the western-Alpine orogenic wedge and, as a whole, override the structurally composite ophiolitic Piemonte zone. Instead, the Mt. Emilius, Glacier-Rafray, Etirol-Levaz and other lower Austroalpine eclogitic outliers are inserted within the Piemonte zone, between its upper (Combin) and lower (Zermatt-Saas) tectonic elements, or within the latter. Rb-Sr dating on phengitic micas show that the eclogitic imprint in the lower Austroalpine outliers, conventionally regarded as Late Cretaceous by comparison with the Sesia-Lanzo inlier, is of Eocene age (49-40 Ma), like the underlying Zermatt-Saas ophiolite (45-42 Ma) between the Aosta valley and Gran Paradiso massif. ⁴⁰Ar-³⁹Ar plateau ages on the same mica concentrates of the ophiolitic Zermatt-Saas nappe (46-43 Ma) are consistent with Rb-Sr dating, whereas that on the Austroalpine Glacier-Rafray klippe (92 Ma) is influenced by argon excess. The lower Austroalpine outliers underwent the subduction metamorphism concurrently with the Zermatt-Saas nappe, 20-25 Ma later than the eclogitic Sesia-Lanzo inlier and blueschist Pillonet klippe. The temporal gap and present intra-ophiolitic position mean that the lower Austroalpine outliers were probably derived from an intraoceanic extensional allochthon (Mt. Emilius domain) stranded inside the Piemonte-Ligurian ocean far from the Dent Blanche-Sesia domain and Adriatic margin.     

Mesozoic transtensional basin history of the Eastern Cordillera, Colombian Andes: Inferences from tectonic models

Backstripping analysis and forward modeling of 162 stratigraphic columns and wells of the Eastern Cordillera (EC), Llanos, and Magdalena Valley shows the Mesozoic Colombian Basin is marked by five lithosphere stretching pulses. Three stretching events are suggested during the Triassic–Jurassic, but additional biostratigraphical data are needed to identify them precisely. The spatial distribution of lithosphere stretching values suggests that small, narrow (<150 km), asymmetric graben basins were located on opposite sides of the paleo-Magdalena–La Salina fault system, which probably was active as a master transtensional or strike-slip fault system. Paleomagnetic data suggesting a significant (at least 10°) northward translation of terranes west of the Bucaramanga fault during the Early Jurassic, and the similarity between the early Mesozoic stratigraphy and tectonic setting of the Payandé terrane with the Late Permian transtensional rift of the Eastern Cordillera of Peru and Bolivia indicate that the areas were adjacent in early Mesozoic times. New geochronological, petrological, stratigraphic, and structural research is necessary to test this hypothesis, including additional paleomagnetic investigations to determine the paleolatitudinal position of the Central Cordillera and adjacent tectonic terranes during the Triassic–Jurassic. Two stretching events are suggested for the Cretaceous: Berriasian–Hauterivian (144–127 Ma) and Aptian–Albian (121–102 Ma). During the Early Cretaceous, marine facies accumulated on an extensional basin system. Shallow-marine sedimentation ended at the end of the Cretaceous due to the accretion of oceanic terranes of the Western Cordillera. In Berriasian–Hauterivian subsidence curves, isopach maps and paleomagnetic data imply a (>180 km) wide, asymmetrical, transtensional half-rift basin existed, divided by the Santander Floresta horst or high. The location of small mafic intrusions coincides with areas of thin crust (crustal stretching factors >1.4) and maximum stretching of the subcrustal lithosphere. During the Aptian–early Albian, the basin extended toward the south in the Upper Magdalena Valley. Differences between crustal and subcrustal stretching values suggest some lowermost crustal decoupling between the crust and subcrustal lithosphere or that increased thermal thinning affected the mantle lithosphere. Late Cretaceous subsidence was mainly driven by lithospheric cooling, water loading, and horizontal compressional stresses generated by collision of oceanic terranes in western Colombia. Triassic transtensional basins were narrow and increased in width during the Triassic and Jurassic. Cretaceous transtensional basins were wider than Triassic–Jurassic basins. During the Mesozoic, the strike-slip component gradually decreased at the expense of the increase of the extensional component, as suggested by paleomagnetic data and lithosphere stretching values. During the Berriasian–Hauterivian, the eastern side of the extensional basin may have developed by reactivation of an older Paleozoic rift system associated with the Guaicáramo fault system. The western side probably developed through reactivation of an earlier normal fault system developed during Triassic–Jurassic transtension. Alternatively, the eastern and western margins of the graben may have developed along older strike-slip faults, which were the boundaries of the accretion of terranes west of the Guaicáramo fault during the Late Triassic and Jurassic. The increasing width of the graben system likely was the result of progressive tensional reactivation of preexisting upper crustal weakness zones. Lateral changes in Mesozoic sediment thickness suggest the reverse or thrust faults that now define the eastern and western borders of the EC were originally normal faults with a strike-slip component that inverted during the Cenozoic Andean orogeny. Thus, the Guaicáramo, La Salina, Bitúima, Magdalena, and Boyacá originally were transtensional faults. Their oblique orientation relative to the Mesozoic magmatic arc of the Central Cordillera may be the result of oblique slip extension during the Cretaceous or inherited from the pre-Mesozoic structural grains. However, not all Mesozoic transtensional faults were inverted.     

Kinematic significance of fold- and fault-related fracture systems in the Zagros mountains, southern Iran

Initiation and formation of folds and the Kazerun high-angle fault zone, in the Zagros fold-and-thrust belt, were related to the continuing SW–NE oriented contraction that probably initiated in the Late Cretaceous, and intensified, starting in Miocene, when the Arabian and Eurasian plates collided. The contraction that led to folding and thrusting of the Phanerozoic sequence in the belt has led to the strike–slip reactivation of basement faults that formed during the Precambrian. Two major systems of fractures have developed, under the same regional state of contraction, during the folding and strike–slip faulting processes. Folding led to the formation of a system of fold-related fractures that comprises four sets of fractures, which include an axial and a cross-axial set that trend parallel and perpendicular to the confining fold axial trace, respectively, and two oblique sets that trend at moderate angles to the axial trace. Slip along high-angle, strike–slip faults formed a system of fractures in the damage zone of the faults (e.g., Kazerun), and deformed folds that existed in the shear zone by rotating their axial plane. This fault-related fracture system is made of five sets of fractures, which include the two sets of Riedel shear fractures (R and R′), P- and Y-shear fractures, and an extensional set.

Remote sensing analysis of both fracture systems, in a GIS environment, reveals a related kinematic history for folding outside of the Kazerun shear zone and faulting and deformation (fracturing and rotation of folds) within the Kazerun fault zone. Rotation of the folds and formation of the five sets of the fault-related fractures in the Kazerun shear zone are consistent with a dextral motion along the fault. The mean trends of the shortening directions, independently calculated for the fold- and fault-related fracture systems, are remarkably close (N53 ± 4°E and N50 ± 5°E, respectively), and are perpendicular to the general NW–SE trend of the Zagros fold-and-thrust belt. Although segments of the Kazerun fault are variably oriented within a narrow range, the angular relationships between sets of fault-related fractures and these segments remain constant.     

福建泉州晚中生代伸展构造变形特征与年代学制约

晚中生代福建沿海地区发育多期与古太平洋板块俯冲有关的岩浆活动和构造变形.福建泉州地区伸展构造变形主要表现为高角度正断层和低角度正断层或拆离断层, 古构造应力场反演指示其形成于NW-SE向伸展环境.锆石U-Pb年代学指示泉州地区发育4期岩浆活动, 分别为晚侏罗世(~155 Ma)、早白垩世中期(130~125 Ma)、早白垩世末期(~109 Ma)以及晚白垩世早期(~100 Ma之后).结合构造变形的切割关系和岩浆岩年代学, 长乐-南澳剪切带左旋韧性走滑形成于130~120 Ma, 而右旋脆性剪切形成于120~100 Ma之间.古太平洋板块向华南大陆之下的俯冲角度变化导致福建沿海地区发育晚中生代造山带.造山作用开始于早白垩世之初, 结束于早白垩世末期, 以大规模NW-SE向伸展构造发育为标志, 其从同造山挤压到后造山伸展的转换发生于~120 Ma.      

佳伊断裂带晚白垩世走滑-逆冲事件的新证据

在四平市叶赫镇发现一系列走滑-逆冲断层,断层面平直、陡倾,走向集中在NNE15°~35°范围内,组成了佳木斯—伊通两条主干边界断裂之间的分支断裂带,分支断裂呈雁列式排布,与走向NE45°的主干边界断裂呈锐角相交,指示边界断裂具有右旋走滑特征。叶赫镇走滑-逆冲断裂带的发现为佳木斯—伊通断裂存在晚白垩世晚期—末期的走滑-逆冲事件提供了新证据。叶赫镇分支断裂带是石岭镇分支断裂带向南部的延伸,两者切割了相同的地层,具有相同的构造特征和构造属性,属于同一走滑-逆冲断裂系统,它们是晚白垩世晚期—末期同一地球动力学背景下的产物。     

Growing folds and sedimentation of the Gosau Group, Muttekopf, Northern Calcareous Alps, Austria

Analysis of the three-dimensional geometry of Upper Cretaceous clastics in the Muttekopf area (Northern Calcareous Alps, Austria) indicate fold and fault structures active during deposition. Coniacian continental to neritic sedimentation (Lower Gosau Subgroup) was contemporaneous with displacements on NW-trending faults and minor folding along NE-trending axes. From the Santonian onwards (sedimentation of the deep-marine Upper Gosau Subgroup) the NW-trending faults were sealed and large folds with WSW-trending axes developed. The direction of contraction changed to N-S after the end of Gosau deposition in the Danian (Paleocene). Synorogenic sedimentation patterns indicate continuous contraction from the Coniacian to the Late Maastrichtian/?Danian. Therefore, large-scale extension as observed in the central part of the Eastern Alps cannot be documented in the western parts of the Northern Calcareous Alps. A combination of subduction tectonic erosion for the frontal parts and gravitational adjustment of an unstable orogen after nappe stacking for the internal parts possibly accounts for the different development of Gosau basins in the frontal and trailing regions of the Austroalpine wedge.