Reply to the Discussion by John Nott on ‘Coarse‐sand beach ridges at Cowley Beach,north‐eastern Australia: Their formative processes and potential as records of tropical cyclone history’ by Tamura et al. (2018), Sedimentology,65, 721–744

Tamura et al. (2018) refined our understanding of formative processes that have resulted in a series of coarse‐sand beach ridges at Cowley Beach in north‐eastern Australia. Nott (2018) claimed that there are several shortcomings in the findings Tamura et al. (2018) presented. However, his criticism mostly derived from his misunderstanding of the data and discussion presented in Tamura et al. (2018), which thus should be clarified here. This reply also reiterates how his method for estimating the magnitude of past tropical cyclones from beach ridges is inconsistent with our observations of beach morphology and beach‐ridge formative processes.     

Discussion of ‘Oceanographic and eustatic control of carbonate platform evolution and sequence stratigraphy on the Cretaceous (Valanginian–Campanian) passive margin,northern Gulf of Mexico’ by Phelps et al. (2014), Sedimentology, 61, 461–496

Errors in Phelps et al. ( 2014 ) arise from: (i) inclusion of the East Texas Basin and basin‐flank formations in a regional stratigraphic transect purported to represent the San Marcos Arch (axis of the Comanche Platform, central and south Texas); and (ii) revision of Edwards Group strata (Person Formation) that ignores well‐documented studies in the subsurface and adjacent outcrops in the Balcones fault zone and Edwards Plateau. Consequently, the Upper Albian Composite Sequence 104–101 of Phelps et al. ( 2014 ) should be revised from one cycle to three and the upper boundary of the Albian Supersequence should be elevated to 99·6 Ma.     

Coastal lagoons and beach ridges as complementary sedimentary archives for the reconstruction of Holocene relative sea‐level changes

Coastal lagoons and beach ridges are genetically independent, though non‐continuous, sedimentary archives. We here combine the results from two recently published studies in order to produce an 8000‐year‐long record of Holocene relative sea‐level changes on the island of Samsø, southern Kattegat, Denmark. The reconstruction of the initial mid‐Holocene sea‐level rise is based on the sedimentary infill from topography‐confined coastal lagoons (Sander et al., Boreas, 2015b). Sea‐level index points over the mid‐ to late Holocene period of sea‐level stability and fall are retrieved from the internal structures of a wide beach‐ridge system (Hede et al., The Holocene, 2015). Data from sediment coring, georadar and absolute dating are thus combined in an inter‐disciplinary approach that is highly reproducible in micro‐tidal environments characterised by high sediment supply. We show here that the commonly proximate occurrence of coastal lagoons and beach ridges allows us to produce seamless time series of relative sea‐level changes from field sites in SW Scandinavia and in similar coastal environments.     

Comment on: Mass Fractions of Forty‐Six Major and Trace Elements,Including Rare Earth Elements,in Sediment and Soil Reference Materials Used in Environmental Studies. Fiket et al. (2017), Geostandards and Geoanalytical Research, 41, 123–135

This paper is intended to be a constructive discussion of Fiket et al. (2017, Geostandards and Geoanalytical Research , 41 , 123–135), who dealt with the determination of major, trace and rare earth elements in several sediment and soil certified reference materials. In the present author's view, the paper by Fiket et al. (2017) suffers from a lack of reference to several publications in which somewhat similar results had already been reported. The present contribution therefore provides a comparison of previously published results with those of Fiket et al. for the CRMs soil NCS DC 77302 (GBW 07410), stream sediment NCS DC 73309 (GBW 07311), marine sediments MESS‐3 and NCS DC 75301 (GBW 07314) and estuarine sediment IAEA‐405. It is argued that this fuller consideration (a) allows critical evaluation of the quality of the results presented by Fiket et al. and (b) highlights the advantages of their work. Finally, attention is drawn to the (possible or real) problems that can arise during simultaneous determination of multiple trace elements.     

Traces of historical tropical cyclones and tsunamis in the Ashburton Delta (north‐west Australia)

Although the north‐western coast of Western Australia is highly vulnerable to tropical cyclones and tsunamis, little is known about the geological imprint of historic and prehistoric extreme wave events in this particular area. Despite a number of site‐specific difficulties such as post‐depositional changes and the preservation potential of event deposits, both tropical cyclones and tsunamis may be inferred from the geomorphology and the stratigraphy of beach ridge sequences, washover fans and coastal lagoons or marshes. A further challenge is the differentiation between tsunami and storm deposits in the geological record, particularly where modern deposits and/or historical reports on the event are not available. This study presents a high‐resolution sedimentary record of washover events from the Ashburton River delta (Western Australia) spanning approximately the last 150 years. A detailed characterization of event deposits is provided, and a robust chronostratigraphy for the investigated washover sequence is established based on multi‐proxy sediment analyses and optically stimulated luminescence dating. Combining sedimentological, geochemical and high‐resolution optically stimulated luminescence data, event layers are assigned to known historical events and tropical cyclone deposits are separated from tsunami deposits. For the first time, the 1883 Krakatoa and 1977 Sumba tsunamis are inferred from sedimentary records of the north‐western part of Western Australia. It is demonstrated that optically stimulated luminescence applied in coastal sedimentary archives with favourable luminescence characteristics can provide accurate chronostratigraphies even on a decadal timescale. The results contribute to the data pool of tropical cyclone and tsunami deposits in Holocene stratigraphies; however, they also demonstrate how short‐lived sediment archives may be in dynamic sedimentary environments.     

Reply to the Discussion by Rose of Phelps et al. (2014) ‘Oceanographic and eustatic control of carbonate platform evolution and sequence stratigraphy on the Cretaceous (Valanginian–Campanian) passive margin,northern Gulf of Mexico’, Sedimentology, 61, 461–496

Discussion points raised by Rose ( 2016 ) concentrate on late Albian stratigraphic relationships between formations of the East Texas Basin and the San Marcos Arch of the Comanche Platform in the northern Gulf of Mexico. Criticisms of Phelps et al. (2014) regarding stratigraphic nomenclature, palaeogeography and regional lithostratigraphic correlations generally focus on interpretive aspects of the study or do not account for the full scope of published information. Revisions to the top Aptian–Albian Supersequence boundary by Rose are incompatible with the relative location of a subaerial unconformity, as well as deepening lithofacies trends and retrogradational stratigraphic patterns below the interpreted boundary. Rose's placement of the top Aptian–Albian Supersequence boundary precisely at the Albian–Cenomanian stage boundary also implies ca 1·4 Ma of diachroneity in second order sea‐level patterns between the northern Gulf of Mexico and other documented global sedimentary basins.     

Use of Hydrofluoric Acid Desilicification in the Determination of Highly Siderophile Element Abundances and Re‐Pt‐Os Isotope Systematics in Mafic‐Ultramafic Rocks

Properly combining highly siderophile element (HSE: Re, Pd, Pt, Ru, Ir, Os) abundance data, obtained by isotope dilution, with corresponding ¹⁸⁷Os/¹⁸⁸Os and ¹⁸⁶Os/¹⁸⁸Os measurements of rocks requires efficient digestion of finely‐ground powders and complete spike‐sample equilibration. Yet, because of the nature of commonly used methods for separating Os from a rock matrix, hydrofluoric acid (HF) is typically not used in such digestions. Consequently, some silicates are not completely dissolved, and HSE residing within these silicates may not be fully accessed. Consistent with this, some recent studies of basaltic reference materials (RMs) have concluded that an HF‐desilicification procedure is required to fully access the HSE (Ishikawa et al. (2014) Chemical Geology, 384, 27–46; Li et al. (2015) Geostandards and Geoanalytical Research, 39, 17–30). Highly siderophile element abundance and Os isotope studies of intraplate basalts typically target samples with a range of MgO contents (< 8 to > 18% m/m, or as mass fractions, < 8 to > 18 g per 100 g), in contrast to the lower MgO mass fractions (< 10 g per 100 g) of basalt and diabase RMs (i.e., BIR‐1, BHVO‐2, TDB‐1). To investigate the effect of HF‐desilicification on intraplate basalts, experiments were performed on finely ground Azores basalts (8.1–17 g per 100 g MgO) using a ‘standard acid digestion’ (2:1 mixture of concentrated HNO₃ and HCl), and a standard acid digestion, followed by HF‐desilicification. No systematic trends in HSE abundances were observed between data obtained by standard acid digestion and HF‐desilicification. Desilicification procedures using HF do not improve liberation of the HSE from Azores basalts, or some RMs (e.g., WPR‐1). We conclude that HF‐desilicification procedures are useful for obtaining total HSE contents of some young lavas, but this type of procedure is not recommended for studies where Re‐Pt‐Os chronological information is desired. The collateral effect of a standard acid digestion to liberate Os, followed by HF‐desilicification to obtain Re and Pt abundances in samples, is that the measured Re/Os and Pt/Os may not correspond with measured ¹⁸⁷Os/¹⁸⁸Os or ¹⁸⁶Os/¹⁸⁸Os.     

Sedimentary architecture and depositional controls of a Holocene wave‐dominated barrier‐island system

Barrier‐island system evolution is controlled by internal and external forcing mechanisms, and temporal changes in these mechanisms may be recorded in the sedimentary architecture. However, the precise role of individual forcing mechanisms is rarely well understood due to limited chronological control. This study investigates the relative role of forcing conditions, such as antecedent topography, sea‐level rise, sediment supply, storms and climate changes, on the evolution of a Holocene wave‐dominated barrier‐island system. This article presents temporal reconstruction of the depositional history of the barrier‐island system of Rømø in the Wadden Sea in unprecedented detail, based on ground‐penetrating radar profiles, sediment cores, high‐resolution dating and palynological investigations, and shows that ca 8000 years ago the barrier island formed on a Pleistocene topographic high. During the initial phase of barrier evolution, the long‐term sea‐level rise was relatively rapid (ca 9 mm year⁻¹) and the barrier was narrow and frequently overwashed. Sediment supply kept pace with sea‐level rise, and the barrier‐island system mainly aggraded through the deposition of a ca 7 m thick stack of overwash fans. Aggradation continued for ca 1700 years until sea‐level rise had decreased to <2 mm year⁻¹. In the last ca 6000 years, the barrier prograded 4 to 5 km through deposition of a 10 to 15 m thick beach and shoreface unit, despite a long‐term sea‐level rise of 1 to 2 mm year⁻¹. The long‐term progradation was, however, interrupted by a transgression between 4000 years and 1700 years ago. These results demonstrate that the large‐scale morphology of the Danish Wadden Sea shoreline influences the longshore sediment transport flux and the millennial‐scale dispersal of sediment along the shoreline. On decadal to centennial timescales, major storms induced intense beach and shoreface erosion followed by rapid recovery and progradation which resulted in a highly punctuated beach and shoreface record. Major storms contributed towards a positive sediment budget, and the sustained surplus of sediment was, and still is, instrumental in maintaining the aggradational–progradational state of the barrier island.     

Reply to Molina-Garza et al. (2019) “Discussion of: Ortega-Flores et al. (2018) provenance analysis of Oligocene sandstone from the Cerro Pelón area,southern Gulf of Mexico”

ABSTRACT

The origin of the Oligocene turbidites from the Cerro Pelón area in south Gulf Mexico proposed by Ortega-Flores et al. (2018) is in disagree with the interpretations made by Molina-Garza et al. (2019), which main criticism is based on U-Pb ages of detrital zircons from the matrix of a conglomerate unit, which they refer to as ‘Nanchital Conglomerate’, as well as on the presence of limestone, gabbros, and mafic protolith-derived clasts. Molina-Garza et al. (2019) basically interpret the Nanchital Conglomerate as Miocene in age, which was sourced mainly from metamorphic complexes including their sedimentary covers located to the west and south of the Cerro Pelón area. For some reason, Molina-Garza et al. (2019) suppose that the Nanchital Conglomerate should have the same provenance sources that the Oligocene turbidites from Cerro Pelón area, reported by Ortega-Flores et al. (2018). Based on the foregoing, we strongly disagree with Molina-Garza et al. (2019) considering that, from the beginning, they intend to compare two units of different age. Additionally, the scarce data reported from both the matrix and the clasts of the Nanchital Conglomerate are not determinant for interpreting the provenance of this conglomeratic unit and subsequently, to consider the same rock sources from the Oligocene through Miocene time.     

Coarse‐sand beach ridges at Cowley Beach,north‐eastern Australia: Their formative processes and potential as records of tropical cyclone history

Storm surges generated by tropical cyclones have been considered a primary process for building coarse‐sand beach ridges along the north‐eastern Queensland coast, Australia. This interpretation has led to the development of palaeotempestology based on the beach ridges. To better identify the sedimentary processes responsible for these ridges, a high‐resolution chronostratigraphic analysis of a series of ridges was carried out at Cowley Beach, Queensland, a meso‐tidal beach system with a >3 m tide range. Optically stimulated luminescence ages indicate that 10 ridges accreted seaward over the last 2500 to 2700 years. The ridge crests sit +3·5 to 5·1 m above Australian Height Datum (ca mean sea‐level). A ground‐penetrating radar profile shows two distinct radar facies, both of which are dissected by truncation surfaces. Hummocky structures in the upper facies indicate that the nucleus of the beach ridge forms as a berm at +2·5 m Australian Height Datum, equivalent to the fair‐weather swash limit during high tide. The lower facies comprises a sequence of seaward‐dipping reflections. Beach progradation thus occurs via fair‐weather‐wave accretion of sand, with erosion by storm waves resulting in a sporadic sedimentary record. The ridge deposits above the fair‐weather swash limit are primarily composed of coarse and medium sands with pumice gravels and are largely emplaced during surge events. Inundation of the ridges is more likely to occur in relation to a cyclone passing during high tide. The ridges may also include an aeolian component as cyclonic winds can transport beach sand inland, especially during low tide, and some layers above +2·5 m Australian Height Datum are finer than aeolian ripples found on the backshore. Coarse‐sand ridges at Cowley Beach are thus products of fair‐weather swash and cyclone inundation modulated by tides. Knowledge of this composite depositional process can better inform the development of robust palaeoenvironmental reconstructions from the ridges.     

High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.     

Sources of Inaccuracy in Boron Isotope Measurement Using LA-MC-ICP-MS

Laser ablation multi-collector-inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS) has become a valuable tool for the in situ measurement of the boron isotope composition of geological samples at high (tens to hundreds of μm) spatial resolution. That said, this application suffers from significant analytical challenges. We focus in this study on the underlying processes of two of the main causes for inaccuracies using this technique. We provide empirical evidence that not only Ca ions (Sadekov et al. 2019, Standish et al. 2019, Evans et al. 2021) but also Ar ions, that are reflected within the flight tube of the mass spectrometer, are the source for previously reported issues with spectral baselines. We also address the impact of plasma conditions on the instrumental mass fractionation as a source for matrix- and mass-load-related analytical biases. Comparing experimental data with the results of a dedicated release and diffusion model (RDM) we estimate that a close to complete (~ 97%) release of boron from the sample aerosol is needed to allow for consistently accurate LA boron isotope measurement results without the need for corrections.     

Cambrian wave‐dominated tidal‐flat deposits,central Wisconsin,USA

In central Wisconsin, Cambrian strata of the Elk Mound Group record deposition on open‐coast, wave‐dominated tidal flats. Mature, medium‐grained quartz arenite is dominated by parallel‐bedding with upper‐flow regime parallel‐lamination, deposited during high‐energy storms that also produced three‐dimensional bedforms on the flats. Abundant wave ripples were produced as storms waned or during fair weather, in water depths ≤2 m. Indicators of variably shallow water (washout structures and stranded cnidarian medusae) and subaerial exposure (adhesion marks, rain‐drop impressions and desiccation cracks, including cracked medusae) are abundant. Parallel‐bedded facies preserve a Cruziana ichnofacies, similar to other Cambrian tidal‐flat deposits. Flats were dissected by small, mainly straight channels, the floors of which were grazed intensely by molluscs. Most channels were ephemeral but some developed low levées, point bars and cut‐banks, probably reflecting stabilization by abundant microbial mats and biofilms. Channels were filled with trough cross‐bedding that is interpreted to have been produced mainly during storm runoff. The strata resemble deposits of open‐coast, wave‐dominated tidal flats on the east coast of India and west coast of Korea. Ancient wave‐dominated and open‐coast tidal flats documented to date appear to have been limited to mud‐rich strata with ‘classic’ tidal indicators such as flaser bedding and tidal bundles. The Cambrian (Miaolingian to early Furongian) Elk Mound Group demonstrates that sandy, wave‐dominated tidal flats also can be recognized in the stratigraphic record.     

Modern and historical tropical cyclone and tsunami deposits at the coast of Myanmar: Implications for their identification and preservation in the geological record

The catastrophic storm surge of tropical cyclone Nargis in May 2008 demonstrated Myanmar's exposure to coastal flooding. The investigation of sediments left by tropical cyclone Nargis and its predecessors is an important contribution to prepare for the impact of future tropical cyclones and tsunamis in the region, because they may extend the database for long-term hazard assessment beyond the relatively short instrumental and historical record. This study, for the first time, presents deposits of modern and historical tropical cyclones and tsunamis from the coast of Myanmar. The aim is to establish regional sedimentary characteristics that may help to identify and discriminate cyclones and tsunamis in the geological record, and to document post-depositional changes due to tropical weathering in the first years after deposition. These findings if used to interpret older deposits will extend the existing instrumental record of flooding events in Myanmar. Evaluating deposits that can be related to specific events, such as the 2006 tropical cyclone Mala and the 2004 Indian Ocean tsunami, indicates similar sedimentary characteristics for both types of sediments. Landward thinning and fining trends, littoral sediment sources and sharp lower contacts allow for the differentiation from underlying deposits, while discrimination between tropical cyclone and tsunami origin is challenging based on the applied methods. The modern analogues also demonstrate a rather low preservation potential of the sand sheets due to carbonate dissolution, formation of organic top soils, and coastal erosion. However, in coastal depressions sand sheets of sufficient thickness (>10 cm) may be preserved where the shoreline is prograding or stable. In the most seaward swale of a beach-ridge plain at the Rakhine coast, two sand sheets have been identified in addition to the deposits of 2006 tropical cyclone Mala. Based on a combination of optically stimulated luminescence, radiocarbon and ¹³⁷Cs dating, the younger sand layer is related to 1982 tropical cyclone Gwa, while the older sand layer is most probably the result of an event that took place prior to 1950. Comparison with historical records indicates that the archive is only sensitive to tropical cyclones of category 4 (or higher) with landfall directly in or a few tens of kilometres north of the study area. While the presented tropical cyclone records are restricted to the last 100 years, optically stimulated luminescence ages of the beach ridges indicate that the swales landward of the one investigated in this study might provide tropical cyclone information for at least the past 700 years.     

Coupled ‘storm‐flood’ depositional model: Application to the Miocene–Modern Baram Delta Province,north‐west Borneo

The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (10² to 10⁵ km²) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma⁻¹), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.     

Stability of fine‐grained TT‐OSL and post‐IR IRSL signals from a c. 1 Ma sequence of aeolian and lacustrine deposits from the Nihewan Basin (northern China)

We tested the suitability of the fine‐grained quartz (4–11 μm) Optical Stimulated Luminescence (OSL) and thermally‐transferred OSL (TT‐OSL), and the fine‐grained polymineral (4–11 μm) post‐infrared IRSL (post‐IR IRSL or pIRIR) signals for dating samples from aeolian‐lacustrine deposits from the Xiaochangliang archaeological profile in the Nihewan Basin, China; these deposits include material from the Jaramillo subchron (c. 1.0 Ma). In the upper aeolian section, the OSL and pIRIR₂₉₀ ages are consistent with each other, and show that the upper 8.8 m was deposited between c. 0.3 and c. 140 ka. The luminescence ages indicate a major discontinuity in deposition between the aeolian and the older lacustrine deposits. Below this hiatus at 9.4 m (i.e. in the lacustrine sediments) all three signals are found to be in field saturation (no further systematic increase in burial dose with depth) despite the TT‐OSL signal (apparent mean burial dose ~880 Gy) being well below saturation on the laboratory growth curve. This is in contrast to the pIRIR₂₉₀ signal, which saturates in the field at a level consistent with laboratory saturation. This results in a practical upper limit to the measured burial dose of ~900 Gy (2D₀). Thus for the TT‐OSL and pIRIR₂₉₀ signals, the upper limits for dating lacustrine deposits are <260 ka and c. 240 ka, respectively. These results have major implications for the appropriate future application of these signals. The ages of our lacustrine samples cannot be regarded as necessarily accurate ones; nevertheless, these ages provide the first long series absolute chronology for study of local palaeolithic and geomorphic evolution history aside from the magnetostratigraphical results available before this research.     

Evolution of a carbonate delta generated by gateway‐funnelling of episodic currents

Cool‐water carbonate sedimentation has dominated Mediterranean shelves since the Early Pliocene. Skeletal sand and gravel herein consist of remains of heterozoan organisms, which are susceptible to reworking due to weak early cementation in non‐tropical waters. This study documents the Lower Pleistocene carbonate wedge of Favignana Island (Italy), which prograded from a 5   km wide passage between two palaeo‐islands into a perpendicular, 10 to 15   km wide strait between the palaeo‐islands at one side and Sicily at the other during the Emilian highstand (1·6   Ma to 1·1   Ma). The clinoformed carbonate wedge, which is 50   m thick and 6   km long, formed by east/south‐east progradation of a platform on the submarine sill by currents that were funnelled between the two palaeo‐islands. Platform‐slope clinoforms evolved from initial aggradation (thin and low‐angle) into a progradation phase (thick and high‐angle). Both clinoform types are characterized by a bimodal facies stacking pattern defined by sedimentary structures created by: (i) subaqueous dunes associated with dilute subcritical currents; and (ii) upper‐flow‐regime bedforms associated with sediment‐laden supercritical turbidity currents. Focusing of episodic currents on the platform by funnelling between the islands controlled the downstream formation of a sediment body, here named carbonate delta. The carbonate delta interfingers with subaqueous dune deposits formed in the perpendicular strait. This study uses a reconstruction of bedform dynamics to unravel the evolution of this gateway‐related carbonate accumulation.     

Depositional processes on oceanic island shelves – Evidence from storm‐generated Neogene deposits from the mid‐North Atlantic

Oceanic islands – such as the Azores in the mid‐North Atlantic – are periodically exposed to large storms that often remobilize and transport marine sediments along coastlines, and into deeper environments. Such disruptive events create deposits – denominated tempestites – whose characteristics reflect the highly dynamic environment in which they were formed. Tempestites from oceanic islands, however, are seldom described in the literature and little is known about storm‐related sediment dynamics affecting oceanic island shelves. Therefore, the geological record of tempestite deposits at oceanic islands can provide invaluable information on the processes of sediment remobilization, transport and deposition taking place on insular shelves during and after major storms. In Santa Maria Island (Azores), a sequence of Neogene tempestite deposits was incorporated in the island edifice by the ongoing volcanic activity (thus preserved) and later exposed through uplift and erosion. Because it was overlain by a contemporary coastal lava delta, the water depth at the time of deposition could be inferred, constituting an excellent case‐study to gain insight on the still enigmatic processes of insular shelf deposition. Sedimentological, palaeontological, petrographic and palaeo‐water depth information allowed the reconstruction of the depositional environment of these sediments. The sequence typifies the characteristics of a tempestite (or successive tempestites) formed at ca 50 m depth, in a steep, energetic open insular shelf, and with evidence for massive sediment remobilization from the nearshore to the middle or outer shelf. The authors claim that cross‐shelf transport induced by storm events is the main process of sediment deposition acting on steep and narrow shelves subjected to high‐energetic environments, such as the insular shelves of open‐sea volcanic islands.     

Three‐fold nature of coastal progradation during the Holocene eustatic highstand,Po Plain,Italy – close correspondence of stratal character with distribution patterns

Although general trends in transgressive to highstand sedimentary evolution of river‐mouth coastlines are well‐known, the details of the turnaround from retrogradational (typically estuarine) to aggradational–progradational (typically coastal/deltaic) stacking patterns are not fully resolved. This paper examines the middle to late Holocene eustatic highstand succession of the Po Delta: its stratigraphic architecture records a complex pattern of delta outbuilding and coastal progradation that followed eustatic stabilization, since around 7·7 cal kyr bp . Sedimentological, palaeoecological (benthic foraminifera, ostracods and molluscs) and compositional criteria were used to characterize depositional conditions and sediment‐dispersal pathways within a radiocarbon‐dated chronological framework. A three‐stage progradation history was reconstructed. First, as soon as eustasy stabilized (7·7 to 7·0 cal kyr bp ), rapid bay‐head delta progradation (ca 5 m year^?1), fed mostly by the Po River, took place in a mixed, freshwater and brackish estuarine environment. Second, a dominantly aggradational parasequence set of beach‐barrier deposits in the lower highstand systems tract (7·0 to 2·0 cal kyr bp ) records the development of a shallow, wave‐dominated coastal system fed alongshore, with elongated, modestly crescent beaches (ca 2·5 m year^?1). Third, in the last 2000 years, the development of faster accreting and more rapidly prograding (up to ca 15 m year^?1) Po delta lobes occurred into 30 m deep waters (upper highstand systems tract). This study documents the close correspondence of sediment character with stratal distribution patterns within the highstand systems tract. Remarkable changes in sediment characteristics, palaeoenvironments and direction of sediment transport occur across a surface named the ‘A–P surface’. This surface demarcates a major shift from dominantly aggradational (lower highstand systems tract) to fully progradational (upper highstand systems tract) parasequence stacking. In the Po system, this surface also reflects evolution from a wave‐dominated to river‐dominated deltaic system. Identifying the A–P surface through detailed palaeoecological and compositional data can help guide interpretation of highstand systems tracts in the rock record, especially where facies assemblages and their characteristic geometries are difficult to discern from physical sedimentary structures alone.     

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.