Deposits and physical properties of pyroclastic density currents during complex Subplinian eruptions: the AD 472 (Pollena) eruption of Somma-Vesuvius, Italy

Small-scale pyroclastic density currents (PDCs) associated with the AD 472 (Pollena) eruption of Somma-Vesuvius, Italy, were generated by both magmatic and phreatomagmatic explosive fragmentation. The resulting deposits were emplaced under flow boundary conditions dominated by varying combinations of grain interaction, fluid escape and traction processes. Stratigraphic and lithofacies analysis of these PDCs offers a new perspective on the en masse versus progressive aggradation debate for PDC deposition. In particular, the analyses indicate that PDCs were density stratified with a basal underflow dominated by grain interactions. The underflows comprised trains of self-organized granular pulses of variable thickness and magnitude, depending on the overall particle concentration and fluid turbulence. A change in gradient between the upper and lower slopes of the volcano promoted deposition and the different pulses aggraded sequentially (stepwise). In this model each pulse stops en masse and the whole deposit aggrades progressively. Particle concentration, density, mean velocity, and flow height were assessed for the studied PDCs using differaent methods for massive and stratified deposits. The calculated mobility of the flows was 0·2 to 0·3, in the expected range for small-scale PDCs.     

Transport and deposition of pyroclastic density currents over an inhabited area: the deposits of the AD 79 eruption of Vesuvius at Herculaneum, Italy

Geological and volcanological studies were performed in the Herculaneum excavations, 7 km west of Vesuvius, Italy, to reconstruct the main features of the pyroclastic density currents and the temporal sequence of the ad 79 eruptive events that destroyed and buried the town. The identification of two distinctive marker beds allows correlation of these deposits with the better‐known sequences to the south of Vesuvius, along the dispersal axis of the Plinian fall deposit. Detailed observations from stratigraphic sections show that the pyroclastic density current deposits are characterized by several sedimentary facies, each recording different depositional and emplacement mechanisms. Facies analysis reveals both lateral and vertical variations from massive to stratified deposits, which can be related to the combined effects of flow dynamics and local irregularities of the substratum at centimetre or metre scales. These topographic irregularities enhanced turbulence and allowed rapid transition from non‐turbulent to turbulent transport within the flow. Fabric data from these deposits, both from roof tile orientations and anisotropy magnetic susceptibility (AMS) analyses carried out on some of the pyroclastic deposits, suggest that the pyroclastic density currents were strongly affected by the presence of buildings. These obstacles probably caused deflection and separation of flows into multiple lobes that moved in different directions.     

The rate of sedimentation from turbulent suspension: An experimental model with application to pyroclastic density currents and discussion on the grain‐size dependence of flow runout

Large‐scale experiments generating ground‐hugging multiphase flows were carried out with the aim of modelling the rate of sedimentation, of pyroclastic density currents. The current was initiated by the impact on the ground of a dense gas‐particle fountain issuing from a vertical conduit. On impact, a thick massive deposit was formed. The grain size of the massive deposit was almost identical to that of the mixture feeding the fountain, suggesting that similar layers formed at the impact of a natural volcanic fountain should be representative of the parent grain‐size distribution of the eruption. The flow evolved laterally into a turbulent suspension current that sedimented a thin, tractive layer. A good correlation was found between the ratio of transported/sedimented load and the normalized Rouse number of the turbulent current. A model of the sedimentation rate was developed, which shows a relationship between grain size and flow runout. A current fed with coarser particles has a higher sedimentation rate, a larger grain‐size selectivity and runs shorter than a current fed with finer particles. Application of the model to pyroclastic deposits of Vesuvius and Campi Flegrei of Southern Italy resulted in sedimentation rates falling inside the range of experiments and allowed definition of the duration of pyroclastic density currents which add important information on the hazard of such dangerous flows. The model could possibly be extended, in the future, to other geological density currents as, for example, turbidity currents.     

Storm-induced turbidity currents on a sediment-starved shelf: Insight from direct monitoring and repeat seabed mapping of upslope migrating bedforms

The monitoring of turbidity currents enables accurate internal structure and timing of these flows to be understood. Without monitoring, triggers of turbidity currents often remain hypothetical and are inferred from sedimentary structures of deposits and their age. In this study, the bottom currents within 20 m of the seabed in one of the Pointe-des-Monts (Gulf of St. Lawrence, eastern Canada) submarine canyons were monitored for two consecutive years using Acoustic Doppler Current Profilers. In addition, multibeam bathymetric surveys were carried out during deployment of the Acoustic Doppler Current Profilers and recovery operations. These new surveys, along with previous multibeam surveys carried out over the last decade, revealed that crescentic bedforms have migrated upslope by about 20 to 40 m since 2007, despite the limited supply of sediment on the shelf or river inflow in the region. During the winter of 2017, two turbidity currents with velocities reaching 0·5 m sec⁻¹ and 2·0 m sec⁻¹, respectively, were recorded and were responsible for the rapid (<1 min) upstream migration of crescentic bedforms measured between the autumn surveys of 2016 and 2017. The 200 kg (in water) mooring was also displaced 10 m down-canyon, up the stoss side of a bedform, suggesting that a dense basal layer could be driving the flow during the first minute of the event. Two other weaker turbidity currents with speeds <0·5 m sec⁻¹ occurred, but did not lead to any significant change on the seabed. These four turbidity currents coincided with strong and sustained wind speed >60 km h⁻¹ and higher than normal wave heights. Repeat seabed mapping suggests that the turbidity currents cannot be attributed to a canyon-wall slope failure. Rather, sustained windstorms triggered turbidity currents either by remobilizing limited volumes of sediment on the shelf or by resuspending sediment in the canyon head. Turbidity currents can thus be triggered when the sediment volume available is limited, likely by eroding and incorporating canyon thalweg sediment in the flow, thereby igniting the flow. This process appears to be particularly important for the generation of turbidity currents capable of eroding the lee side of upslope migrating bedforms in sediment-starved environments and might have wider implications for the activity of submarine canyons worldwide. In addition, this study suggests that a large external trigger (in this case storms) is required to initiate turbidity currents in sediment-starved environments, which contrasts with supply-dominated environments where turbidity currents are sometimes recorded without a clear triggering mechanism.     

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.     

The role of tidal,wave and river currents in the evolution of mixed‐energy deltas: Example from the Lajas Formation (Argentina)

Many modern deltas show complex morphologies and architectures related to the interplay of river, wave and tidal currents. However, methods for extracting the signature of the individual processes from the stratigraphic architecture are poorly developed. Through an analysis of facies, palaeocurrents and stratigraphic stacking patterns in the Jurassic Lajas Formation, this paper: (i) separates the signals of wave, tide and river currents; (ii) illustrates the result of strong tidal reworking in the distal reaches of deltaic systems; and (iii) discusses the implications of this reworking for the evolution of mixed‐energy systems and their reservoir heterogeneities. The Lajas Formation, a sand‐rich, shallow‐marine, mixed‐energy deltaic system in the Neuquén Basin of Argentina, previously defined as a tide‐dominated system, presents an exceptional example of process variability at different scales. Tidal signals are predominantly located in the delta front, the subaqueous platform and the distributary channel deposits. Tidal currents vigorously reworked the delta front during transgressions, producing intensely cross‐stratified, sheet‐like, sandstone units. In the subaqueous platform, described for the first time in an ancient outcrop example, the tidal reworking was confined within subtidal channels. The intensive tidal reworking in the distal reaches of the regressive delta front could not have been predicted from knowledge of the coeval proximal reaches of the regressive delta front. The wave signals occur mainly in the shelf or shoreface deposits. The fluvial signals increase in abundance proximally but are always mixed with the other processes. The Lajas system is an unusual clean‐water (i.e. very little mud is present in the system), sand‐rich deltaic system, very different from the majority of mud‐rich, modern tide‐influenced examples. The sand‐rich character is a combination of source proximity, syndepositional tectonic activity and strong tidal‐current reworking, which produced amalgamated sandstone bodies in the delta‐front area, and a final stratigraphic record very different from the simple coarsening‐upward trends of river‐dominated and wave‐dominated delta fronts.     

Magnitude of lateral displacement on the Crevillente Fault Zone (Betic Cordillera,SE Spain): stratigraphical and sedimentological considerations

The Crevillente Fault Zone (CFZ) comprises a system of northeast to southwest oriented dextral faults that extend for some 600 km in the External Zones of the Betic Cordillera (SE Spain). The magnitude of lateral displacement related to this fault zone is not well constrained, and it is considered to be between 20 and 400 km. The stratigraphical and sedimentological criteria used in this work have proven effective in quantifying the magnitude of the displacement along this structure. We have analysed an oolitic turbidite facies in the Middle Jurassic of the Sierra de Ricote (Median Subbetic of Murcia Province). A detailed revision of ooidal limestone outcrops has revealed that the source area of these deposits was to the Internal Subbetic zone, north of Vélez Rubio (Almería Province). These two tectonic units, the Median and Internal Subbetic, are currently 75 km from each other and separated by the CFZ. The conclusions arising from our stratigraphical, petrological and sedimentological studies favour interpretation of a 75–100 km lateral displacement. After restoring the Late Jurassic–Cretaceous anticlockwise rotation of Iberia, the CFZ appears to belong to the E–W palaeofault system that is related to the extension of the South Iberian Continental Margin (SICM). Copyright © 2004 John Wiley & Sons, Ltd.     

Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.     

Fe and Mn in calcites cementing red beds: A record of oxidation–reduction conditions: Examples from the Catalan Coastal Ranges (NE Spain)

Fe and Mn occur in calcite cements depending on the oxidizing–reducing conditions of cementing waters, which may change according to depositional and diagenetic environments. In red beds, Mn and Fe are available from the ferruginous matrix. Thus, it is possible to know the oxidizing–reducing conditions of fluids that precipitated calcite as a function of Mn and Fe content in calcite cement. A detailed petrological (with special attention to cathodoluminescence) and geochemical analysis of these cements is a useful tool to constrain the diagenetic evolution of red beds and the history of the basin where they deposited.     

Temporal and spatial variations in tectonic subsidence in the Iberian Basin (eastern Spain): inferences from automated forward modelling of high-resolution stratigraphy (Permian–Mesozoic)

By subsidence analysis on eighteen surface sections and 6 wells, which cover large part of the Iberian Basin (E Spain) and which are marked by high-resolution stratigraphy of the Permian, Triassic, Jurassic and Cretaceous, we quantify the complex Permian and Mesozoic tectonic subsidence history of the basin. Backstripping analysis of the available high resolution and high surface density of the database allows to quantify spatial and temporal patterns of tectonically driven subsidence to a much higher degree than previous studies. The sections and wells have also been forward modelled with a new ‘automated' modelling technique, with unlimited number of stretching phases, in order to quantify variations in timing and magnitude of rifting. It is demonstrated that the tectonic subsidence history in the Iberian Basin is characterized by pulsating periods of stretching intermitted by periods of relative tectonic quiescence and thermal subsidence. The number of stretching phases appears to be much larger than found by earlier studies, showing a close match with stretching phases found in other parts of the Iberian Peninsula and allowing a clear correlation with discrete phases in the opening of the Tethys and Atlantic.     

Effects of grain size distribution on mineralogical and chemical compositions: a case study from size‐fractional sediments of the Huanghe (Yellow River) and Changjiang (Yangtze River)

The influence of hydrodynamics on the chemical composition of sediments is based on the uneven distribution of element abundances in different size fractions. In this study, 72 size‐fractional sediments from the Huanghe (Yellow River) and Changjiang (Yangtze River) riverbeds were measured with XRD, SEM, ICP‐AES and ICP‐MS. The analysis results show that the mineral and chemical characteristics change with grain size in the Huanghe and Changjiang sediments. According to the principal components analysis, three independent geochemical factors were found. The first factor elements, Zr, Hf, Th, U, Y, La and TiO₂ are influenced by the existence of heavy minerals. The second factor elements, Al₂O₃, alkalis, alkaline earth (excluding Ca and Sr) and most of the transitional metals are dominated by clay minerals. The third factor group includes Ca and Sr, which were controlled by calcium‐bearing mineral contents and chemical weathering intensities. The various grain size distributions greatly affect the mineralogical and chemical compositions of bulk sediments. Compared to other size fractions, the 5–6PHI size fractions of the Huanghe and Changjiang sediments have special mineralogical and chemical compositions, and intermediate volume percentages. Weight or volume percentage of each size fraction may be more suitable than mean grain‐size of the bulk sediment to elucidate the grain size effects. Chemical Index of Alteration (CIA) values increase steeply with decreasing grain size, while Weathering Index of Parker (WIP) values are relatively stable. Because of the big influence of the abundance of clay minerals on CIA values, it is questionable to use CIA as a proxy of weathering intensity. Considering the clay mineral effects, stability in values and heterogeneous material properties, WIP has the potential to indicate the chemical weathering intensity of sediments. Copyright © 2014 John Wiley & Sons, Ltd.     

Carbonatation processes at the El Berrocal natural analogue granitic system (Spain): inferences from mineralogical and stable isotope studies

The El Berrocal granite/U-bearing quartz vein system has been studied as a natural analogue of a high-level radioactive waste repository. The main objective is to understand the geochemical behaviour of natural radionuclides occurring under natural conditions. In this framework, the carbonatation processes have been studied from a mineralogical and isotopic ( and ) point of view, since carbonate anions are powerful complexing agents for U(VI) under both low-temperature hydrothermal and environmental conditions. The carbonatation processes in the system are identified by the presence of secondary ankerite, with minor calcite, scattered in the hydrothermally altered granite, and Mn calcite in fracture filling materials. The isotopic signatures of these carbonates lead us to conclude that ankerite and calcite from the former were formed at the end of the same hydrothermal process that altered the granite, at a temperature range of between 72° and 61°C for ankerite, and between 52° and 35°C for calcite. The effect of edaphic CO₂ on both carbonates, greater on calcite than on ankerite, is demonstrated. Calcites from fracture fillings are, at least, binary mixtures, in different proportions, of hydrothermal calcite, formed between 25° and <100°C, and supergenic calcite, formed at ≤25°C. According to their signatures, the effect of edaphic CO₂ in both calcites is also evident. It is assumed that: (i) hydrothermal calcite from fracture fillings and ankerite from the hydrothermally altered granite are the result of the same hydrothermal process, their chemical differences being due to the intensity of the water/rock interaction which was stronger in the altered granite than in the fractures; and (ii) all of these carbonatation processes are responsible for ancient and recent migration/retention of uranium observed in the hydrothermally altered granite and fracture fillings.     

Travertine deposition and faulting: the fault-related travertine fissure-ridge at Terme S. Giovanni,Rapolano Terme (Italy)

In this paper we describe an example of travertine fissure-ridge development along the trace of a normal fault with metre displacement, located in the eastern margin of the Neogene–Quaternary Siena Basin, in the Terme S. Giovanni area (Rapolano Terme, Italy). This morphotectonic feature, 250 m long, 30 m wide and 10 m high, formed from supersaturated hot waters (39.9°C) flowing from thermal springs aligned along the trace of the normal fault dissecting travertines not older than Late Pleistocene (24 ± 3 ka). A straight, continuous fissure with a maximum width of 20 cm occurs at the top of the ridge, along its crest. Hot fluids flow from cones mainly located at the extremities of the ridge, where travertine is depositing. The travertine fissure-ridge shows an asymmetrical profile since it buries the fault scarp. The difference in height of slopes corresponds to the vertical displacement of the normal fault. Fissuring of the recent travertine deposits along the strike of the crestal fissure, as well as recent hydrothermal circulation, lead us to believe that the Terme S. Giovanni normal fault may be currently active. On the whole, the Terme S. Giovanni fissure ridge can be defined as a travertine fault trace fissure-ridge, adding a helpful example for studying the relationship between faulting and travertine deposition.     

天山乌鲁木齐河源1号冰川融水可培养细菌生理生化特性及其系统发育

对天山乌鲁木齐河源1号冰川末端融水细菌进行分离,检测了分离菌株的生理生化表型特征,通过16S rRNA基因序列分析确定分离菌株的系统进化地位.结果表明:天山乌鲁木齐河源1号冰川融水中分离的36株代表菌株分属于5个系统发育类群、8个属,其中,Bacteroidetes和γ-Proteobacteria为优势类群,分别占41.7%和38.9%;在属水平上,假单胞菌属(Pseudomonas)菌株占39%.依据菌株最适生长温度,36株分离菌株80%以上属于耐冷菌;产酶实验显示,大多数菌株同时产蛋白酶和脂肪酶,仅3株菌不产酶,6株菌同时产脂肪酶、淀粉酶、蛋白酶.耐药性试验表明,36株分离菌株对各种抗生素有不同程度的耐药,其中,7株菌对测试的10种抗生素均具有耐药性.研究结果将有助于了解天山乌鲁木齐河源1号冰川微生物物种多样性、生理多样性,同时为评估气候变化、人类活动对冰川微生物生理特性潜在的影响提供依据.     

Variscan ore formation and metamorphism at the Felbertal scheelite deposit (Austria): constraining tungsten mineralisation from Re–Os dating of molybdenite

The Felbertal scheelite deposit in the Eastern Alps has been regarded as the type locality for stratabound scheelite deposits. It is hosted by a Cambro-Ordovician metavolcanic arc sequence with minor Variscan granitoids (∼ 340 Ma) in the central Tauern Window. Re–Os model ages for molybdenite from the Felbertal tungsten deposit range between ∼ 358 and ∼ 336 Ma and record several pulses of magmatic-hydrothermal-metamorphic molybdenite formation. Molybdenite ages from the K2 orebody, a scheelite-rich quartz mylonite in the Western ore field, indicate that both mineralisation and mylonite are Variscan in age and suggest that the shear zone was active for ∼ 20 million years. Early stage tungsten mineralisation (Scheelite 1) in quartzitic ores in the Eastern ore field, which is free of molybdenite, yielded very low to near blank levels of Re and Os and thus could not be dated. However, molybdenite from scheelite–quartz stringers, previously interpreted as a feeder stockwork to quartzitic scheelite ore of presumed Cambrian age, yielded Variscan Re–Os ages of ∼ 342 and ∼ 337 Ma. Dating of molybdenite contained in scheelite ores thus far provides no indication of a Cambrian component to the tungsten mineralisation. Our data are consistent with a model of either granite intrusion-related ore formation and coeval metamorphic overprint during the Early Carboniferous or, alternatively, molybdenite formation may be exclusively attributed to Variscan metamorphism (see Stein 2006).     

Origin and mechanisms of K–Si-metasomatism of ca. 3.4–3.3 Ga volcaniclastic deposits and implications for Archean seawater evolution: Examples from cherts of Kittys Gap (Pilbara craton, Australia) and Msauli (Barberton Greenstone Belt, South Africa)

The effects of K–Si-metasomatism during the formation of Early Archean replacement cherts have been quantified in this study by the investigation of two well-known stratigraphic sections: the Msauli chert (MC, Barberton greenstone belt, South Africa) and the Kittys Gap chert (KGC, Pilbara craton, Western Australia). The KGCs have a dacitic precursor similar to Duffer Formation dacites (Pilbara craton), while the MCs are derived from Al-depleted komatiites similar to those from the Weltevreden Formation (Barberton greenstone belt). Mass balance calculations reveal that the volcaniclastic deposits had initial porosities of up to 85 vol.% for the KGC and of 65 vol.% for the MC. Secondary porosities (27 vol.%: MC, 8 vol.%: KGC) produced during K-metasomatism are proportional to the dissolution of Fe, Ca, Mg-rich glass and precursor minerals. Komatiites have a higher chemical exchange potential than dacites, each gram releasing 1.2 mmol Fe²⁺, 2.8 mmol Mg²⁺, 1.4 mmol Ca²⁺ and 1.1 mmol Na⁺ to seawater, together with 4.4 mmol O²⁻. K-metasomatism of 1 g of komatiite further implies an uptake of 0.67 mmol of K⁺ and 2.7 mmol of H⁺. The highest silica uptake is achieved for the KGC (82 mmol/g of precursor). This silica enrichment most likely operated in the water column and at the sediment–water interface by sorption mechanisms on the surface of detrital particles and particulate organic matter, as a result of seawater silica-saturation. Acidic conditions (pH 5.5–6.5) and hot temperatures (>70 °C) favored the formation of K-rich phyllosilicates by interaction with seawater during the early diagenetic alteration of the volcaniclastic particles. The widespread occurrence of K–Si-metasomatism in volcanic and sedimentary rocks can be regarded as a general alteration process of the Early Archean seafloor, with a major influence on seawater composition. The highly K-selective metasomatism confirms previous studies suggesting that the Archean ocean was acidic and probably in equilibrium with a CO₂-rich atmosphere.     

古亚洲洋东段闭合时限：来自大兴安岭南段二叠系-三叠系界线沉积地层和碎屑锆石年代学的制约

古亚洲洋东段的具体闭合时限长期以来存在争议,重要原因在于缺乏相应时期的典型沉积剖面研究。近期,笔者在大兴安岭南段阿鲁科尔沁旗地区新发现一套保存较好的二叠-三叠系沉积序列,其详细记录了古亚洲洋闭合过程。本文以此为研究对象,重点对上二叠统林西组和下三叠统老龙头组开展沉积学和碎屑锆石年代学研究。上二叠统林西组上部为一套湖泊相沉积,下三叠统老龙头组为一套河湖相沉积,底部为冲积扇辫状河砾岩层。两套地层界线附近沉积环境发生剧变,气候从温暖湿润转变为炎热干旱,确定研究区林西组沉积时代为晚二叠世长兴期,老龙头组沉积时代为早三叠世奥伦尼克期,两者为平行不整合接触关系,两者之间存在短暂沉积间断。林西组砂岩重矿物含量丰富,类型多样,原岩为中酸性岩浆岩、基性岩浆岩、少部分变质岩及沉积岩;老龙头组砂岩重矿物类型少,原岩为中酸性岩浆岩和少量变质岩。林西组2个碎屑岩样品最年轻峰值年龄分别为255±2Ma和255±1Ma,ε_Hf(t)=-22.84~+13.17,变化范围较大。老龙头组2个碎屑岩样品最年轻峰值年龄分别为248±1Ma和249±1Ma,ε_Hf(t)=7.95~11.28。结合重矿物、碎屑锆石和Hf同位素研究,确定林西组物源主要来自于兴蒙造山带,少量可能来自于华北板块,具有复杂物源、远距离搬运再沉积的特征。老龙头组物源主要来自于兴蒙造山带,具有周缘近距离搬运沉积的特征。通过区域对比上二叠统林西组与下三叠统老龙头组碎屑锆石携带年代学信息,推测古亚洲洋东段沿着西拉木伦河缝合带在晚二叠世发生汇聚碰撞作用,古亚洲洋东段闭合作用至少持续至早三叠世,老龙头组沉积期发生强烈汇聚造山作用,老龙头组是古亚洲洋闭合板块碰撞作用的产物。

     

South Equatorial Current (SEC) driven changes at DSDP Site 237, Central Indian Ocean, during the Plio-Pleistocene: Evidence from Benthic Foraminifera and Stable Isotopes

This study attempts to analyse paleoceanographic changes in the Central Indian Ocean (Deep Sea Drilling Project Site 237), linked to monsoon variability as well as deep-sea circulation during the Plio-Pleistocene. We used factor and cluster analyses of census data of the 34 most dominant species of benthic foraminifera that enabled us to identify five biofacies: Astrononion umbilicatulum–Uvigerina proboscidea (Au–Up), Pullenia bulloides–Bulimina striata (Pb–Bs), Globocassidulina tumida–Nuttallides umbonifera (Gt–Nu), Gyroidinoides nitidula–Cibicides wuellerstorfi (Gn–Cw) and Cassidulina carinata–Cassidulina laevigata (Cc–Cl) biofacies. Knowledge of the environmental preferences of modern deep-sea benthic foraminifera helped to interpret the results of factor and cluster analyses in combination with oxygen and carbon isotope values. The biofacies indicative of high surface productivity, resulting from a stronger South Equatorial Current (Au–Up and Pb–Bs biofacies), dominate the early Pliocene interval (5.6–4.5 Ma) of global warmth. An intense Indo-Pacific ‘biogenic bloom’ and strong Oxygen Minimum Zone extended to intermediate depths (1000–2000 m) over large parts of the Indian Ocean in the early Pliocene. Since 4.5 Ma, the food supply in the Central Indian Ocean dropped and fluctuated while deep waters were corrosive (biofacies Gt–Nu, Gn–Cw). The Pleistocene interval is characterized by an intermediate flux of organic matter (Cc–Cl biofacies).     

A new key pole for the East European Craton at 1452 Ma: Palaeomagnetic and geochronological constraints from mafic rocks in the Lake Ladoga region (Russian Karelia)

Palaeomagnetic and geochronological studies on mafic rocks in the Lake Ladoga region in South Russian Karelia provide a new, reliably dated Mesoproterozoic key paleopole for the East European Craton (Baltica). U–Pb dating on baddeleyite gives a crystallisation age of 1452 ± 12 Ma for one of the studied dolerite dykes. A mean palaeomagnetic pole for the Mesoproterozoic dolerite dykes, Valaam sill and Salmi basalts yields a paleopole at 15.2°N, 177.1°E, A₉₅ = 5.5°. Positive baked contact test for the dolerite dykes and positive reversal test for the Salmi basalts and for the dykes confirm the primary nature of the magnetisation. Comparison of this Baltica palaeopole with coeval paleomagnetic data for Laurentia and Siberia provides a revised palaeoposition of these cratons. The results verify that the East European Craton, Laurentia and Siberia were part of the supercontinent Columbia from the Late Palaeoproterozoic to the Middle Neoproterozoic.