Volatile-induced magma differentiation in the plumbing system of Mt. Etna volcano (Italy): evidence from glass in tephra of the 2001 eruption

Mount Etna volcano was shaken during the summer 2001 by one of the most singular eruptive episodes of the last centuries. For about 3 weeks, several eruptive fractures developed, emitting lava flows and tephra that significantly modified the landscape of the southern flank of the volcano. This event stimulated the attention of the scientific community especially for the simultaneous emission of petrologically distinct magmas, recognized as coming from different segments of the plumbing system. A stratigraphically controlled sampling of tephra layers was performed at the most active vents of the eruption, in particular at the 2,100 m (CAL) and at the 2,550 m (LAG) scoria cones. Detailed scanning electron microscope and energy dispersive x-ray spectrometer (SEM-EDS) analyses performed on glasses found in tephra and comparison with lava whole rock compositions indicate an anomalous increase in Ti, Fe, P, and particularly of K and Cl in the upper layers of the LAG sequence. Mass balance and thermodynamic calculations have shown that this enrichment cannot be accounted for by “classical” differentiation processes, such as crystal fractionation and magma mixing. The analysis of petrological features of the magmas involved in the event, integrated with the volcanological evolution, has evidenced the role played by volatiles in controlling the magmatic evolution within the crustal portion of the plumbing system. Volatiles, constituted of H₂O, CO₂, and Cl-complexes, originated from a deeply seated magma body (DBM). Their upward migration occurred through a fracture network possibly developed by the seismic swarms during the period preceding the event. In the upper portion of the plumbing system, a shallower residing magma body (ABT) had chemical and physical conditions to receive migrating volatiles, which hence dissolved the mobilized elements producing the observed selective enrichment. This volatile-induced differentiation involved exclusively the lowest erupted portion of the ABT magma due to the low velocity of volatiles diffusion within a crystallizing magma body and/or to the short time between volatiles migration and the onset of the eruption. Furthermore, the increased amount of volatiles in this level of the chamber strongly affected the eruptive behavior. In fact, the emission of these products at the LAG vent, towards the end of the eruption, modified the eruptive style from classical strombolian to strongly explosive.     

Volcanic tremor at Mt. Etna: Inferences on magma dynamics during effusive and explosive activity

During 1999, the volcanic activity at Mt. Etna was both explosive and effusive at the summit craters: Strombolian activity, lava fountains and lava flows affected different areas of the volcano, involving three of the four summit craters. Results from analysis of the 1999 volcanic tremor features are shown at two different time scales. First, the long-term time variation of the features of the volcanic tremor (including spectral and polarization parameters), during the entire year, was compared with the evolution of the eruptive activity. This approach demonstrated the good agreement between tremor data and observed eruptive activity; the activation of different tremor sources was suggested. Then, a more refined analysis of the volcanic tremor, recorded during 14 lava fountain eruptions, was performed. In particular, a shift of the dominant frequencies towards lower values was noted which corresponds with increasing explosive activity. Similar behaviour in the frequency content has already been observed in other explosive eruptions at Mt. Etna as well as on other volcanoes. This behaviour has been explained in terms of either an increase in the tremor source dimension or a decrease in the sound speed in the magma within the conduit. These results confirm that the volcanic tremor is a powerful tool for better understanding the physical processes controlling explosive eruptions at Mt. Etna volcano.     

Shifting styles of basaltic explosive activity during the 2002–03 eruption of Mt. Etna, Italy

The 2002–03 flank eruption of Etna was characterized by two months of explosive activity that produced copious ash fallout, constituting a major source of hazard and damage over all eastern Sicily. Most of the tephra were erupted from vents at 2750 and 2800 m elevation on the S flank of the volcano, where different eruptive styles alternated. The dominant style of explosive activity consisted of discrete to pulsing magma jets mounted by wide ash plumes, which we refer to as ash-rich jets and plumes. Similarly, ash-rich explosive activity was also briefly observed during the 2001 flank eruption of Etna, but is otherwise fairly uncommon in the recent history of Etna. Here, we describe the features of the 2002–03 explosive activity and compare it with the 2001 eruption in order to characterize ash-rich jets and plumes and their transition with other eruptive styles, including Strombolian and ash explosions, mainly through chemical, componentry and morphology investigations of erupted ash. Past models explain the transition between different styles of basaltic explosive activity only in terms of flow conditions of gas and liquid. Our findings suggest that the abundant presence of a solid phase (microlites) may also control vent degassing and consequent magma fragmentation and eruptive style. In fact, in contrast with the Strombolian or Hawaiian microlite-poor, fluidal, sideromelane clasts, ash-rich jets and plumes produce crystal-rich tachylite clasts with evidence of brittle fragmentation, suggesting that high groundmass crystallinity of the very top part of the magma column may reduce bubble movement while increasing fragmentation efficiency.     

The role of syn-eruptive vesiculation on explosive basaltic activity at Mt. Etna,Italy

We investigated the dynamics of explosive activity at Mt. Etna between 31 August and 15 December 2006 by combining vesicle studies in the erupted products with measurements of the gas composition at the active, summit crater. The analysed scoria clasts present large, connected vesicles with complex shapes and smaller, isolated, spherical vesicles, the content of which increases in scoriae from the most explosive events. Gas geochemistry reports CO₂/SO₂ and SO₂/HCl ratios supporting a deep-derived gas phase for fire-fountain activity. By integrating results from scoria vesiculation and gas analysis we find that the highest energy episodes of Mt. Etna activity in 2006 were driven by a previously accumulated CO₂-rich gas phase but we highlight the lesser role of syn-eruptive vesicle nucleation driven by water exsolution during ascent. We conclude that syn-eruptive vesiculation is a common process in Etnean magmas that may promote a deeper conduit magma fragmentation and increase ash formation.     

Petrologic evidence of a complex plumbing system feeding the July–August 2001 eruption of Mt. Etna,Sicily, Italy

After the major 1991–1993 eruption, Mt. Etna resumed flank activity in July 2001 through a complex system of eruptive fissures cutting the NE and the S flanks of the volcano and feeding effusive activity, fire fountains, Strombolian and minor phreatomagmatic explosions. Throughout the eruption, magmas with different petrography and composition were erupted. The vents higher than 2,600 m a.s.l. (hereafter Upper vents, UV) erupted porphyritic, plagioclase-rich trachybasalt, typical of present-day summit and flank activity. Differently, the vents located at 2,550 and 2,100 m a.s.l. (hereafter Lower vents, LV) produced slightly more primitive trachybasalt dominated by large clinopyroxene, olivine and uncommon minerals for Etna such as amphibole, apatite and orthopyroxene and containing siliceous and cognate xenoliths. Petrologic investigations carried out on samples collected throughout the eruption provided insights into one of the most intriguing aspects of the 2001 activity, namely the coeval occurrence of distinct magmas. We interpret this evidence as the result of a complex plumbing system. It consists in two separate magma storage systems: a shallow one feeding the activity of the UV and a deeper and more complex storage related to the activity of LV. In this deep storage zone, which is thermally and compositionally zoned, the favourable conditions allow the crystallization of amphibole and the occurrence of cognate xenoliths representing wall cumulates. Throughout 2001 eruption, UV and LV magmas remain clearly distinct and ascended following different paths, ruling out the occurrence of mixing processes between them. Furthermore, integrating the 2001 eruption in the framework of summit activity occurring since 1995, we propose that the 2001 magma feeding the vents lower than 2,600 m a.s.l. is a precursor of a refilling event, which reached its peak during the 2002–2003 Etna flank eruption.     

Seismic activity accompanying the outbreak of the 1991–1993 eruption of Mt. Etna (Italy)

The character and location of seismic activity accompanying the onset of the 1991–1993 eruption at Mt. Etna are compatible with the surface evidence of the volcanic pile rupture. Both the epicentral distribution and the focal mechanisms of a swarm that occurred on December 14, 1991, agree with magma ascent occurring along the main NNW-SSE-trending structure of the volcano and the consequent opening of a system of effusive fissures with the same trend. A typical mainshock-aftershock sequence, recorded the day after and indicating transcurrent displacement occurring along the second-principal structure of Etna (NE-SW), depicts the tectonic response of the volcanic pile and the underlying basement to major stresses applied by the magma push.     

Unusual magma storage conditions at Mt. Etna (Southern Italy) as evidenced by plagioclase megacryst-bearing lavas: implications for the plumbing system geometry and summit caldera collapse

At Mt. Etna volcano, the emission of plagioclase megacryst-bearing lavas, known locally as “cicirara”, has occurred rarely and generally in association with unusual volcanological phenomena. In this work, we interpret the magma chamber processes and the structural features of the plumbing system that led to the production of these peculiar volcanic rocks, based on a detailed study of plagioclase megacrysts, including their oscillatory zoning, sieve textures, and fluid inclusions. Patchy zoning suggests limited ascent in the deep levels of the plumbing system, based on the plagioclase nucleation threshold and the volatile saturation depth. At intermediate, water-undersaturated levels of the plumbing system ascent is faster, as indicated by crystals with coarse sieve textures. Storage at shallow, water-saturated levels (less than 6 km deep) is associated with oscillatory zoning with very small changes in An. Slightly larger An variations coupled with different wavelengths provide evidence of convection of crystals across distinct zones of the chamber. Stripes of melt inclusions formed at steps of magma ascent and volatile loss, whereas layers of fluid inclusions may be related to episodes of volatile flushing into the magma chamber. In contrast, strongly sieve-textured envelopes with An increase and constant FeO may be related to mixing with more volatile-rich magmas of similar composition. We interpret the repeated occurrence of “cicirara” lavas as evidence that the shallow portion of the plumbing system underwent a progressive coalescence of a complex network of dykes and sills in response to increasing rates of magma supply from depth. Major magma withdrawals from this larger reservoir may be linked to episodes of summit instability associated with major caldera collapses.     

Seismic activity accompanying the 1974 eruption of Mt. Etna

On January 30, 1974, an explosive eruption began on the western side of Etna. The activity evolved into two eruptive periods (January 30–February 17 and March 11–29). Two spatter cones (Mount De Fiore I and Mount De Fiore II) were formed at a height of about 1650 m a.s.l. and a distance of 6 km from the summit area. The effusive activity was very irregular with viscous lava flows of modest length.A seismic network of four stations was established around the upper part of the volcano on February 3. Moreover additional mobile stations were set up at several different sites in order to obtain more detailed informations on epicenter locations and spectral content of volcanic tremor.The volcanic activity is discussed in relation to the distribution of epicenters and the time-space distribution of the spectral characteristics of volcanic earthquakes and tremor. The characteristics of the seismic activity suggest that the flank eruption of Mount Etna was probably feed by a lateral branch of the main conduit yielding the activity at the Central Crater.     

Seismic activity preceding the 1983 eruption of Mt. Etna

The March–August, 1983 eruption of Mt. Etna can be considered as one of the most important in the last years.The analysis of seismic activity during the three months immediately before the eruption showed interesting variations of theb coefficient, in the frequency-magnitude relationship, that have been linked to possible changes of the stress field in the Etnean region.The eruption start was also preceded by a strong seismic crisis with epicenters mostly on the southern, eastern and southwestern flanks of the volcano, and characterized by the shallowness of most of the events (h3 km).The data analysis has led to a hypothesis on the eruption occurrence based on a model of dynamic evolution of the stress field acting on Mt. Etna.     

Upwards migration of seismic focii: A forerunner of the 1989 eruption of Mt Etna (Italy)

Data from a portable array of three-component digital stations, run at Mt Etna from 1988 to early 1990, highlight the seismic behaviour of the volcano before the 1989 eruption, one of the most significant in terms of energy of the last two decades. After a two-year period of weak and discotinuous seismicity, the depth of the seismically active volumes was observed to become shallower a few months before the volcanic event. The overall migration of the events, inferred by hypocentral locations and decreases of S-P time differences at two stations, agrees with other geophysical forerunners and allows further insights into the changes in the stress field leading to the eruption.     

Earthen barriers to control lava flows in the 2001 eruption of Mt. Etna

Preceded by four days of intense seismicity and marked ground deformation, a new eruption of Mt. Etna started on 17 July and lasted until 9 August 2001. It produced lava emission and strombolian and phreatomagmatic activity from four different main vents located on a complex fracture system extending from the southeast summit cone for about 4.5 km southwards, from 3000 to 2100 m elevation (a.s.l.). The lava emitted from the lowest vent cut up an important road on the volcano and destroyed other rural roads and a few isolated country houses. Its front descended southwards to about 4 km distance from the villages of Nicolosi and Belpasso. A plan of intervention, including diversion and retaining barriers and possibly lava flow interruption, was prepared but not activated because the flow front stopped as a consequence of a decrease in the effusion rate. Extensive interventions were carried out in order to protect some important tourist facilities of the Sapienza and Mts. Silvestri zones (1900 m elevation) from being destroyed by the lava emitted from vents located at 2700 m and 2550 m elevation. Thirteen earthen barriers (with a maximum length of 370 m, height of 10–12 m, base width of 15 m and volume of 25 000 m³) were built to divert the lava flow away from the facilities towards a path implying considerably less damage. Most of the barriers were oriented diagonally (110–135°) to the direction of the flow. They were made of loose material excavated nearby and worked very nicely, resisting the thrust of the lava without any difficulty. After the interventions carried out on Mt. Etna in 1983 and in 1991–1992, those of 2001 confirm that earthen barriers can be very effective in controlling lava flows.     

Features of volcanic tremors on Mt. Etna (Sicily) during the March–August 1983 eruption

The seismic analysis of the volcanic tremors preceding and accompanying the Etnean eruption of March–August, 1983 has shown a significant variation in the spectral content before the beginning of the eruption, the tremor peaks at 1.4 and 1.6 Hz — which might be associated with the feeding pipes of the NE crater (Schick et al., 1982a) — being the dominant feature of the spectra.A model of eruption mechanism is proposed where a feeder dyke would connect the NE crater with the effusive fracture.     

A thermal model of the magma reservoir feeding Plinian eruptions at Mt. Vesuvius (Italy)

A theoretical thermal model has been worked out for the magma reservoir that would have fed the two last Plinian eruptions of Mt. Vesuvius (Barberi et al., 1981). The effect of convective motions is discussed, and it is shown that the size of convective cells and the efficiency of the process in smoothing out temperature gradients evolves in time due to the progressive viscosity increase produced by the heat lost by conductive heat transfer through the host rock. Although convection will be important throughout the history of the reservoir, until very high viscosities are reached, the pure conductive model seems to account satisfactorily for the cumulative heat loss by the reservoir. Gravitative crystal settling can occur, even in presence of convective motions, mostly during several hundred years after the magma emplacement when viscosity is not yet increased to high values.     

Lava-flow hazard on the SE flank of Mt. Etna (Southern Italy)

A method for mapping lava-flow hazard on the SE flank of Mt. Etna (Sicily, Southern Italy) by applying the Cellular Automata model SCIARA_-fv is described, together with employed techniques of calibration and validation through a parallel Genetic Algorithm. The study area is partly urbanised; it has repeatedly been affected by lava flows from flank eruptions in historical time, and shows evidence of a dominant SSE-trending fracture system. Moreover, a dormant deep-seated gravitational deformation, associated with a larger volcano-tectonic phenomenon, affects the whole south-eastern flank of the volcano.     

The role of the urban system dysfunction in the assessment of seismic risk in the Mt. Etna area (Italy)

A procedure for seismic risk assessment is applied to the Mt. Etna area (eastern Sicily, Italy) through assessment of urban system dysfunction following the occurrence of an earthquake. The tool used is based on the Disruption Index as a concept implemented in Simulator QuakeIST, which defines urban disruption following a natural disaster. The first element of the procedure is the definition of the seismic input, which is based on information about historical seismicity and seismogenic faults. The second element is computation of seismic impact on the building stock and infrastructure in the area considered. Information on urban-scale vulnerability was collected and a geographic information system was used to organise the data relating to buildings and network systems (e.g., building stock, schools, strategic structures, lifelines). The central idea underlying the definition of the Disruption Index is identification and evaluation of the impact on a target community through the physical elements that most contribute to severe disruption. The procedure applied in this study (i.e., software and data) constitutes a very useful operational tool to drive the development of strategies to minimise risks from earthquakes.     

The occurrence of Mt Barca flank eruption in the evolution of the NW periphery of Etna volcano (Italy)

Geological surveys, tephrostratigraphic study, and ⁴⁰Ar/³⁹Ar age determinations have allowed us to chronologically constrain the geological evolution of the lower NW flank of Etna volcano and to reconstruct the eruptive style of the Mt Barca flank eruption. This peripheral sector of the Mt Etna edifice, corresponding to the upper Simeto valley, was invaded by the Ellittico volcano lava flows between 41 and 29 ka ago when the Mt Barca eruption occurred. The vent of this flank eruption is located at about 15 km away from the summit craters, close to the town of Bronte. The Mt Barca eruption was characterized by a vigorous explosive activity that produced pyroclastic deposits dispersed eastward and minor effusive activity with the emission of a 1.1-km-long lava flow. Explosive activity was characterized by a phreatomagmatic phase followed by a magmatic one. The geological setting of this peripheral sector of the volcano favors the interaction between the rising magma and the shallow groundwater hosted in the volcanic pile resting on the impermeable sedimentary basement. This process produced phreatomagmatic activity in the first phase of the eruption, forming a pyroclastic fall deposit made of high-density, poorly vesicular scoria lapilli and lithic clasts. Conversely, during the second phase, a typical strombolian fall deposit formed. In terms of hazard assessment, the possible occurrence of this type of highly explosive flank eruption, at lower elevation in the densely inhabited areas, increases the volcanic risk in the Etnean region and widens the already known hazard scenario.     

3-D density model of Mt. Etna Volcano (Southern Italy)

A detailed density model of Mt. Etna and its surrounding areas has been evaluated using a 3-D inversion of the gravimetric data acquired in the 1980's. Several high-density and low-density bodies are found, penetrating from shallow depths as far down as 12 km bsl. A positive correlation (in terms of location, extent, density, and velocity) is established between several anomalies of the density model and features identified in previously published seismic tomographies. A prominent high-density body extending down to 7 km bsl is recognized in the southern part of the Valle del Bove, and interpreted as a solidified magmatic intrusion. On the western boundary of this anomaly, a low-density body is interpreted as a bubble and liquid magma mixture. Outside the central area, three other high-density anomalies are imaged and attributed to the earliest phases of volcanic activity in the area. Several interesting low-density anomalies are also identified and correlated with known fault lines and other structural features of the region.     

Mechanisms for ground-surface fracturing and incipient slope failure associated with the 2001 eruption of Mt. Etna, Italy: analysis of ephemeral field data

During the July–August 2001 eruption of Mt. Etna development of extensional fractures/faults and grabens accompanied magma intrusion and subsequent volcanic activity. During the first days of the eruption, we performed an analysis of attitude, displacement and propagation of fractures and faults exposed on the ground surface in two sites, Torre del Filosofo and Valle del Leone, located along the same fracture system in the region surrounding the Valle del Bove depression on the eastern flank of Mt. Etna. Fractures and faults formed as the consequence of a shallow intruding dyke system that fed the several volcanic centres developed along the fracture system. The investigated sites differ in slope attitude and in geometrical relationships between fractures and slopes. In particular, the fracture system propagated parallel to the gentle slope (<7° dip) in the Torre del Filosofo area, and perpendicular to the steep slope (25° dip) in the Valle del Leone area. In the Torre del Filosofo area, slight graben subsidence and horizontal extension of the ground surface by about 3 m were recorded. In the Valle del Leone area, extensional faulting forming a larger and deeper graben with horizontal extension of the ground surface by about 10 m was recorded. For the Valle del Leone area, we assessed a downhill dip of 14° for the graben master fault at the structural level beneath the graben where the fault dip shallows. These results suggest that dyke intrusion at Mount Etna, and particularly in the region surrounding the Valle del Bove depression, may be at the origin of slope failure and subsequent slumps where boundary conditions, i.e. geometry of dyke, slope dip and initial shear stress, amongst others, favour incipient failures.     

Magma mixing during the 2001 event at Mount Etna (Italy): Effects on the eruptive dynamics

During the 2001 eruptive episode three different magmas were erupted on the southern flank of Mount Etna volcano from distinct vent systems. Major and minor element chemistry of rocks and minerals shows that mixing occurred, and that the mixed magma was erupted during the last eruptive phases.The space–time integrated analysis of the eruption, supported by geophysical data, together with major and trace element bulk chemistry (XRF, ICP-MS) and major and trace mineral chemistry (EPMA, LAM ICP-MS), support the following model: 1) trachybasaltic magma rises through a NNW–SSE trending structure, connected to the main open conduit system; 2) ascent of an amphibole-bearing trachybasaltic magma from a 6 km deep eccentric reservoir through newly open N–S trending fractures; 3) just a few days following the eruption onset the two tectonic systems intersect at the Laghetto area; 4) at the Laghetto vent a mixed magma is erupted.Mixing occurred between the amphibole-bearing trachybasaltic magma and an inferred deep more basic end-member. The most relevant aspect in the eruptive dynamics is that the eruption of the mixed magma at the Laghetto vent was highly explosive due to volatile content in the magma. The gas phase formed, mainly because of the decreased volatile solubility due to rapid fractures opening and increased T, related to mixing, and partially because of the amphibole breakdown.