The entry heating and abundances of basaltic micrometeorites

Basaltic micrometeorites (MMs) derived from HED‐like parent bodies have been found among particles collected from the Antarctic and from Arctic glaciers and are to date the only achondritic particles reported among cosmic dust. The majority of Antarctic basaltic particles are completely melted cosmic spherules with only one unmelted particle recognized from the region. This paper investigates the entry heating of basaltic MMs in order to predict the relative abundances of unmelted to melted basaltic particles and to evaluate how mineralogical differences in precursor materials influence the final products of atmospheric entry collected on the Earth's surface. Thermodynamic modeling is used to simulate the melting behavior of particles with compositions corresponding to eucrites, diogenites, and ordinary chondrites in order to evaluate degree of partial melting and to make a comparison between the behavior of chondritic particles that dominate the terrestrial dust flux and basaltic micrometeroids. The results of 120,000 simulations were compiled to predict relative abundances and indicate that the phase relations of precursor materials are crucial in determining the relative abundances of particle types. Diogenite and ordinary chondrite materials exhibit similar behavior, although diogenite precursors are more likely to form cosmic spherules under similar entry parameters. Eucrite particles, however, are much more likely to melt due to their lower liquidus temperatures and small temperature interval of partial melting. Eucrite MMs, therefore, usually form completely molten cosmic spherules except at particle diameters <100 μm. The low abundance of unmelted basaltic MMs compared with spherules, if statistically valid, is also shown to be inconsistent with a low velocity population (12 km s^?1) and is more compatible with higher velocities which may suggest a near‐Earth asteroid source dominates the current dust production of basaltic MMs.     

A preliminary investigation into the nature of carbonaceous material in ordinary chondrites

Abstract— The nature and isotopic composition of carbonaceous components in a variety of ordinary chondrites have been studied using stepped combustion. The samples were chosen to include falls, finds and Antarctic meteorites; specimens from all three chemical groups (H, L and LL) have been analysed. Effort was concentrated mostly on the low petrologic type meteorites (i.e., type 3); however, types 4–6 were also included in the study. Apart from terrestrial contaminants and weathering products, some of the unequilibrated ordinary chondrites appear to contain an indigenous organic component. In addition, most of the samples studied show evidence for an amorphous/graphitic component. This exists as C-rich aggregates or as carbon associated with “Huss” matrix. There does not appear to be any difference in δ¹³C for this carbon between Antarctic and non-Antarctic meteorites. In contrast, low temperature carbon in Antarctic samples is characterized by a ¹³C-enrichment. This is thought to be due to the influence of terrestrial weathering products introduced in the Antarctic. Curiously, the low temperature carbon in non-Antarctic finds appears to be intermediate in δ¹³C between Antarctic finds and non-Antarctic falls. This suggests that the weathering processes which are so obviously apparent from Antarctic samples may also extend, albeit in a more limited way, to non-Antarctic meteorites.     

A METHOD FOR THE IDENTIFICATION AND ELIMINATION OF CONTAMINATION DURING CARBON ISOTOPIC ANALYSES OF EXTRATERRESTRIAL SAMPLES

The study of carbon abundance and isotopic composition in extraterrestrial samples is fraught with problems related to contamination in the terrestrial environment and during sample handling. A stepped combustion method is described which demonstrates that progress can be made towards resolving the indigenous species from contamination which for the most part burns at low temperature (< 425 ± 25 ±C). The proposed method is not applicable to samples which have indigenous phases burning at low temperatures e.g. the C1 and C2 carbonaceous chondrites. A number of examples where its application is possible are given. Even meteorites collected immediately after their fall, such as Allende, contain a proportion of extraneous carbon which has deleterious effects on any bulk estimate of isotopic composition. “Falls” which have spent a considerable time in museum collections and “finds” (other than Antarctic samples) can be considered as grossly contaminated. Bulk isotope and carbon abundance measurements in the literature for most samples having less than 1 wt% C are thus of questionable value. Antarctic samples have much less contamination of an organic nature but all seem to contain a weathering component which can be easily recognised and hence disregarded in estimates of bulk composition. Stepped combustion, applied to an Apollo 11 lunar soil which has not been specially stored and which now contains, due to contamination, nearly twice as much carbon as when originally collected, can still afford data closely resembling those obtained from the sample when it was first returned to Earth.     

Raman characterization of carbonaceous matter in CONCORDIA Antarctic micrometeorites

Abstract– We report a multi‐wavelength Raman spectroscopy study of carbonaceous matter in 38 Antarctic micrometeorites (AMMs) from the 2006 CONCORDIA collection. The particles were selected as a function of their degree of thermal alteration developed during the deceleration in the atmosphere. These samples range from unmelted (fine‐grained—Fg; ultracarbonaceous—UCAMMs) to partially melted AMMs (scorias—Sc) and completely melted particles (cosmic spherules—CS). More than half of the analyzed AMMs contain a substantial amount of polyaromatic carbonaceous matter with a high degree of disorder. The proportion of particles where carbon is not detected increase from the Fg to the Fg‐Sc and to the Sc‐AMMs, and no carbon is detected in CS. In addition, the spectral characteristics of the G and D bands of the carbonaceous matter in Sc‐AMMs plot apart from the trend formed by the data from Fg‐AMMs and UCAMMs. These results suggest that oxidation processes occurred during the deceleration of the particles in the atmosphere. In Fg‐AMMs and UCAMMs, the spectral characteristics of the G and D bands reveal the high degree of disorder of the carbonaceous matter, precluding a long duration thermal metamorphism on the parent body and suggesting that AMMs have a connection with C1–C2 chondrites. The Raman parameters of the deuterium‐rich carbonaceous matter of UCAMMs do not differ from that of Fg‐AMMs. Using a 244 nm excitation, we detected the cyanide (–CN) functional group for the first time in a UCAMM, reinforcing the likely cometary origin of this type of micrometeorites.     

Melted micrometeorites from Antarctic ice with evidence for the separation of immiscible Fe-Ni-S liquids during entry heating

Abstract— We report the discovery of four large (>50 μm) cosmic spherules (CSs) and a single scoriaceous micrometeorite (SMM) that contain evidence for the separation of immiscible Fe-Ni-S liquids during atmospheric entry heating. The particles contain segregated Fe-rich regions dominated by either Ni-S-bearing Fe-oxides or iron sulphides and have textural relations that suggest these separated from the silicate portions of the particles as metallic liquids. The oxides, which may be hydrous, are thought to result from alteration of metal and sulphide. The compositions of the silicate portions of the CSs are equivalent to spherules without Fe-rich regions, implying that metallic liquids are exsolved during the heating of most spherules, but completely separate. The single SMM has a very different composition from other scoriaceous particles, and the occurrence of an exsolved metallic liquid probably indicates extreme reduction during entry heating. The pyrolysis of carbonaceous materials is the most likely explanation for reduction and suggests that the precursor material of this particle was unusually C-rich. This SMM might be, therefore, an appropriate candidate for a large melted anhydrous or smectite interplanetary dust particle (IDP). The exsolution of immiscible Fe-Ni-S liquids during entry heating will result in systematic changes in the compositions of the remaining silicate melt.     

Density,porosity, mineralogy,and internal structure of cosmic dust and alteration of its properties during high‐velocity atmospheric entry

X‐ray microtomography (XMT), X‐ray diffraction (XRD), and magnetic hysteresis measurements were used to determine micrometeorite internal structure, mineralogy, crystallography, and physical properties at μm resolution. The study samples include unmelted, partially melted (scoriaceous), and completely melted (cosmic spherules) micrometeorites. This variety not only allows comparison of the mineralogy and porosity of these three micrometeorite types but also reveals changes in meteoroid properties during atmospheric entry at various velocities. At low entry velocities, meteoroids do not melt and their physical properties do not change. The porosity of unmelted micrometeorites varies considerably (0–12%) with one friable example having porosity around 50%. At higher velocities, the range of meteoroid porosity narrows, but average porosity increases (to 16–27%) due to volatile evaporation and partial melting (scoriaceous phase). Metal distribution seems to be mostly unaffected at this stage. At even higher entry velocities, complete melting follows the scoriaceous phase. Complete melting is accompanied by metal oxidation and redistribution, loss of porosity (1 ± 1%), and narrowing of the bulk (3.2 ± 0.5 g cm^?3) and grain (3.3 ± 0.5 g cm^?3) density range. Melted cosmic spherules with a barred olivine structure show an oriented crystallographic structure, whereas other subtypes do not.     

Interior textures,chemical compositions,and noble gas signatures of Antarctic cosmic spherules: Possible sources of spherules with long exposure ages

Abstract– The interior texture and chemical and noble gas composition of 99 cosmic spherules collected from the meteorite ice field around the Yamato Mountains in Antarctica were investigated. Their textures were used to classify the spherules into six different types reflecting the degree of heating: 13 were cryptocrystalline, 40 were barred olivine, 3 were porphyritic A, 24 were porphyritic B, 9 were porphyritic C, and 10 were partially melted spherules. While a correlation exists between the type of spherule and its noble gas content, there is no significant correlation between its chemical composition and noble gas content. Fifteen of the spherules still had detectable amounts of extraterrestrial He, and the majority of them had ³He/⁴He ratios that were close to that of solar wind (SW). The Ne isotopic composition of 28 of the spherules clustered between implantation‐fractionated SW and air. Extraterrestrial Ar, confirmed to be present because it had a ⁴⁰Ar/³⁶Ar ratio lower than that of terrestrial atmosphere, was found in 35 of the spherules. An enigmatic spherule, labeled M240410, had an extremely high concentration of cosmogenic nuclides. Assuming 4π exposure to galactic and solar cosmic rays as a micrometeoroid and no exposure on the parent body, the cosmic‐ray exposure (CRE) age of 393 Myr could be computed using cosmogenic ²¹Ne. Under these model assumptions, the inferred age suggests that the particle might have been an Edgeworth‐Kuiper Belt object. Alternatively, if exposure near the surface of its parent body was dominant, the CRE age of 382 Myr can be estimated from the cosmogenic ³⁸Ar using the production rate of the 2π exposure geometry, and implies that the particle may have originated in the mature regolith of an asteroid.     

A propensity for n‐ω‐amino acids in thermally altered Antarctic meteorites

Abstract– Asteroids and their fragments have impacted the Earth for the last 4.5 Gyr. Carbonaceous meteorites are known to contain a wealth of indigenous organic molecules, including amino acids, which suggests that these meteorites could have been an important source of prebiotic organic material during the origins of life on Earth and possibly elsewhere. We report the detection of extraterrestrial amino acids in thermally altered type 3 CV and CO carbonaceous chondrites and ureilites recovered from Antarctica. The amino acid concentrations of the thirteen Antarctic meteorites ranged from 300 to 3200 parts‐per‐billion (ppb), generally much less abundant than in amino acid‐rich CI, CM, and CR carbonaceous chondrites that experienced much lower temperature aqueous alteration on their parent bodies. In contrast to low‐temperature aqueously altered meteorites that show complete structural diversity in amino acids formed predominantly by Strecker–cyanohydrin synthesis, the thermally altered meteorites studied here are dominated by small, straight‐chain, amine terminal (n‐ω‐amino) amino acids that are not consistent with Strecker formation. The carbon isotopic ratios of two extraterrestrial n‐ω‐amino acids measured in one of the CV chondrites (δ¹³C approximately ?25‰) are consistent with ¹³C‐depletions observed previously in hydrocarbons produced by Fischer‐Tropsch type reactions. The predominance of n‐ω‐amino acid isomers in thermally altered meteorites hints at cosmochemical mechanisms for the preferential formation and preservation of a small subset of the possible amino acids.     

A numerical model for isotopic patterns from thermal-extraction experiments

Abstract— A model based on volume diffusion is proposed to describe thermal extraction (progressive or stepped vacuum-pyrolysis or combustion) experimental results (yield and isotopic composition), reported against time or temperature. It accounts for the common asymmetrical shape of the release patterns, with peak-tails due to the extraction kinetics. By analogy to this model, a simulation function is introduced which allows calculation of the concentration and isotopic patterns resulting from component mixings during such experiments. In this calculation, each component's isotopic composition is assumed to be constant throughout its extraction. The simulation readily explains the shift between the isotopic composition peaks and the concentration peaks in the temperature release pattern commonly observed during pyrolysis or combustion of meteorite samples. Because of its simplicity, the principles of the simulation can be easily applied by the readers to real data. One example is taken from the meteoritic stable isotope literature: the progressive pyrolysis extraction of hydrogen from the Parnallee LL3 meteorite (Robert et al., 1987a). The simulation permits calculation of a range for the isotopic composition of a D-depleted reservoir in this meteorite: ?460 < δD < ?320‰ rel. SMOW.     

A potentially new type of nonchondritic interplanetary dust particle with hematite,organic carbon,amorphous Na,Ca‐aluminosilicate,and FeO‐spheres

Abstract– We used a combination of different analytical techniques to study particle W7190‐D12 using microinfrared spectroscopy, micro‐Raman spectroscopy, and field emission scanning electron microscopy (FESEM) energy dispersive X‐ray spectroscopy (EDS). The particle consists mainly of hematite (α‐Fe₂O₃) with considerable variations in structural disorder. It further contains amorphous (Na,K)‐bearing Ca,Al‐silicate and organic carbon. Iron‐bearing spherules (<150 nm in diameter) cover the surface of this particle. At local sites of structural disorder at the hematite surface, the hematite spheres were reduced to FeO in the presence of organic carbons forming FeO‐spheres. However, metallic Fe spheres cannot be excluded based on the available data. To the best of our knowledge, this particle is the first detection of such spherules at the surface of a stratospheric dust particle. Although there is no definitive evidence for an extraterrestrial origin of particle W7190‐D12, we suggest that it could be an IDP that had moved away from the asteroid‐forming region of the early solar system into the outer solar system of the accreting Kuiper Belt objects. After it was released from a Jupiter family comet, this particle became part of the zodiacal cloud. Atmospheric entry flash‐heating caused (1) the formation of microenvironments of reduced iron oxide when indigenous carbon materials reacted with hematite covering its surface resulting in the formation of FeO‐spheres and (2) Na‐loss from Na,Al‐plagioclase. The particle of this study, and other similar particles on this collector, may represent a potentially new type of nonchondritic IDPs associated with Jupiter family comets, although an origin in the asteroid belt cannot be ignored.     

A review of volatile compounds in tektites,and carbon content and isotopic composition of moldavite glass

Abstract– Tektites, natural silica‐rich glasses produced during impact events, commonly contain bubbles. The paper reviews published data on pressure and composition of a gas phase contained in the tektite bubbles and data on other volatile compounds which can be released from tektites by either high‐temperature melting or by crushing or milling under vacuum. Gas extraction from tektites using high‐temperature melting generally produced higher gas yield and different gas composition than the low‐temperature extraction using crushing or milling under vacuum. The high‐temperature extraction obviously releases volatiles not only from the bubbles, but also volatile compounds contained directly in the glass. Moreover, the gas composition can be modified by reactions between the released gases and the glass melt. Published data indicate that besides CO₂ and/or CO in the bubbles, another carbon reservoir is present directly in the tektite glass. To clarify the problem of carbon content and carbon isotopic composition of the tektite glass, three samples from the Central European tektite strewn field—moldavites—were analyzed. The samples contained only 35–41 ppm C with δ¹³C values in the range from ?28.5 to ?29.9‰ VPDB. This indicates that terrestrial organic matter was a dominant carbon source during moldavite formation.     

Assessment and control of organic and other contaminants associated with the Stardust sample return from comet 81P/Wild 2

Abstract– Numerous potential sources of organic contaminants could have greatly complicated the interpretation of the organic portions of the samples returned from comet 81P/Wild 2 by the Stardust spacecraft. Measures were taken to control and assess potential organic (and other) contaminants during the design, construction, and flight of the spacecraft, and during and after recovery of the sample return capsule. Studies of controls and the returned samples suggest that many of these potential sources did not contribute any significant material to the collectors. In particular, contamination from soils at the recovery site and materials associated with the ablation of the heatshield do not appear to be significant problems. The largest source of concern is associated with the C present in the original aerogel. The relative abundance of this carbon can vary between aerogel tiles and even within individual tiles. This C was fortunately not distributed among a complex mixture of organics, but was instead largely present in a few simple forms (mostly as Si‐CH₃ groups). In most cases, the signature of returned cometary organics can be readily distinguished from contaminants through their different compositions, nonterrestrial isotopic ratios, and/or association with other cometary materials. However, some conversion of the carbon indigenous to the flight aerogel appears to have happened during particle impact, and some open issues remain regarding how this C may be processed into new forms during the hypervelocity impact collection of the comet dust.     

The Leonard Award Address Presented 1996 July 25, Berlin,Germany: The elemental composition of stony cosmic spherules

Abstract— Five hundred stony cosmic spherules collected from deep-sea sediments, polar ice, and the stratosphere have been analyzed for major and some minor element composition. Typical spherules are products of atmospheric melting of millimeter sized and smaller meteoroids. The samples are small and modified by atmospheric entry, but they are an important source of information on the composition of asteroids. The spherules in this study were all analyzed in an identical manner, and they provide a sampling of the solar system's asteroids that is both different and less biased than provided by studies of conventional meteorites. Volatile elements such as Na and S are depleted due to atmospheric heating, while siderophiles are depleted by less understood causes. The refractory nonsiderophile elements appear not to have been significantly disturbed during atmospheric melting and provide important clues on the elemental composition of millimeter sized meteoroids colliding with the Earth. Typical spherules have CM-like composition that is distinctively different than ordinary chondrites and most other meteorite types. We assume that C-type asteroids are the primary origin of spherules with this composition. Type S asteroids should also be an important source of the spherules, and the analysis data provide constraints on their composition. A minor fraction of the spherules are melt products of precursor particles that did not have chondritic elemental compositions. The most common of these are particles that are dominated by olivine. The observed compositions of spherules are inconsistent with the possibility that an appreciable fraction of the spherules are simply chondrules remelted during atmospheric entry.     

Major and trace element geochemistry of S‐type cosmic spherules

Micrometeorites that pass through the Earth's atmosphere undergo changes in their chemical compositions, thereby making it difficult to understand if they are sourced from the matrix, chondrules, or calcium–aluminum‐rich inclusions (CAIs). These components have the potential to provide evidence toward the understanding of the early solar nebular evolution. The variations in the major element and trace element compositions of 155 different type (scoriaceous, relict bearing, porphyritic, barred, cryptocrystalline, and glass) of S‐type cosmic spherules are investigated with the intent to decipher the parent sources using electron microprobe and laser ablation inductively coupled plasma‐mass spectrometry. The S‐type cosmic spherules appear to show a systematic depletion in volatile element contents, but have preserved their refractory trace elements. The trends in their chemical compositions suggest that the S‐type spherules comprise of components from similar parent bodies, that is, carbonaceous chondrites. Large fosteritic relict grains observed in this investigation appear to be related to the fragments of chondrules from carbonaceous chondrites. Furthermore, four spherules (two of these spherules enclose spinels and one comprised entirely of a Ca‐Al‐rich plagioclase) show enhanced trace element enrichment patterns that are drastically different from all the other 151 cosmic spherules. The information on the chemical composition and rare earth elements (REEs) on cosmic spherules suggest that the partially to fully melted ones can preserve evidences related to their parent bodies. The Ce, Eu, and Tm anomalies found in the cosmic spherules have similar behavior as that of chondrites. Distinct correlations observed between different REEs and types of cosmic spherules reflect the inherited properties of the precursors.     

The origins of I‐type spherules and the atmospheric entry of iron micrometeoroids

The Earth's extraterrestrial dust flux includes a wide variety of dust particles that include FeNi metallic grains. During their atmospheric entry iron micrometeoroids melt and oxidize to form cosmic spherules termed I‐type spherules. These particles are chemically resistant and readily collected by magnetic separation and are thus the most likely micrometeorites to be recovered from modern and ancient sediments. Understanding their behavior during atmospheric entry is crucial in constraining their abundance relative to other particle types and the nature of the zodiacal dust population at 1 AU. This article presents numerical simulations of the atmospheric entry heating of iron meteoroids to investigate the abundance and nature of these materials. The results indicate that iron micrometeoroids experience peak temperatures 300–800 K higher than silicate particles explaining the rarity of unmelted iron particles which can only be present at sizes of <50 μm. The lower evaporation rates of liquid iron oxide leads to greater survival of iron particles compared with silicates, which enhances their abundance among micrometeorites by a factor of 2. The abundance of I‐types is shown to be broadly consistent with the abundance and size of metal in ordinary chondrites and the current day flux of ordinary chondrite‐derived MMs arriving at Earth. Furthermore, carbonaceous asteroids and cometary dust are suggested to make negligible contributions to the I‐type spherule flux. Events involving such objects, therefore, cannot be recognized from I‐type spherule abundances in the geological record.     

Redistribution of elements in the heavily shocked Yanzhuang chondrite

Abstract— Compositions of metal, sulfide, olivine, pyroxene, and plagioclase/plagioclase glass were studied for the melted and unmelted parts of the heavily shocked H6(S6) chondrite‐Yanzhuang. We found that the partitioning of some trace elements significantly changed between the 2 parts; compared with the corresponding minerals in the unmelted part, Ga is enriched in the metal, Co, Cr, and Zn are enriched in the sulfide, Cr is enriched in olivine and pyroxene, and Ti is enriched in the plagioclase glass of the melt pocket. These detailed studies of the mineral phases put constraints on 3 important parameters (temperature, pressure, and duration) associated with the post‐shock melting process. The coexistence of melted and unmelted olivine in the melt pocket of Yanzhuang implies a peak temperature after shock that approaches the melting point of olivine. The lack of Ni in the olivine crystallized from a melt suggests crystallization of olivine at pressures below 10 kbar. The resetting of Ga partitioning between metal and silicate in the melt pocket indicates that the interval from the peak temperature after shock to the crystallization of metal‐sulfide and plagioclase glass in the melted part of Yanzhuang is longer than 500 sec.     

Carbon isotopic fractionation in Fischer‐Tropsch‐type reactions and relevance to meteorite organics

Abstract— Fischer‐Tropsch‐type (FTT) reactions have been hypothesized to contribute to the formation of organic compounds in the early solar system, but it has been difficult to identify a signature of such reactions in meteoritic organics. The work reported here examined whether temperature‐dependent carbon isotopic fractionation of FTT reactions might provide such a signature. Analyses of bulk organic deposits resulting from FTT experiments show a slight trend toward lighter carbon isotopic ratios with increasing temperature. It is unlikely, however, that these carbon isotopic signatures could provide definitive provenance for organic compounds in solar system materials produced through FTT reactions, because of the small scale of the observed fractionations and the possibility that signatures from many different temperatures may be present in any specific grain.     

Pristine stratospheric collection of interplanetary dust on an oil‐free polyurethane foam substrate

We performed chemical, mineralogical, and isotopic studies of the first interplanetary dust particles (IDPs) collected in the stratosphere without the use of silicone oil. The collection substrate, polyurethane foam, effectively traps impacting particles, but the lack of an embedding medium results in significant particle fragmentation. Two dust particles found on the collector exhibit the typical compositional and mineralogical properties of chondritic porous interplanetary dust particles (CP‐IDPs). Hydrogen and nitrogen isotopic imaging revealed isotopic anomalies of typical magnitude and spatial variability observed in previous CP‐IDP studies. Oxygen isotopic imaging shows that individual mineral grains and glass with embedded metal and sulfide (GEMS) grains are dominated by solar system materials. No systematic differences are observed in element abundance patterns of GEMS grains from the dry collection versus silicone oil‐collected IDPs. This initial study establishes the validity of a new IDP collection substrate that avoids the use of silicone oil as a collection medium, removing the need for this problematic contaminant and the organic solvents necessary to remove it. Additional silicone oil‐free collections of this type are needed to determine more accurate bulk element abundances of IDPs and to examine the indigenous soluble organic components of IDPs.     

Atmospheric entry heating of micrometeorites at Earth and Mars: Implications for the survival of organics

The atmospheric entry heating of micrometeorites (MMs) can significantly alter their pre‐existing mineralogy, texture, and organic material. The degree of heating depends predominantly on the gravity and atmospheric density of the planet on which they fall. For particles falling on Earth, the alteration can be significant, leading to the destruction of much of the pre‐entry organics; however, the weaker gravity and thinner atmosphere of Mars enhance the survival of MMs and increase the fraction of particles that preserve organic material. This paper investigates the entry heating of MMs on the Earth and Mars in order to examine the MM population on each planet and give insights into the survival of extraterrestrial organic material. The results show that particles reaching the surface of Mars experience a lower peak temperature compared to Earth and, therefore, experience less evaporative mass loss. Of the particles which reach the surface, 68.2% remain unmelted on Mars compared to only 22.8% on Earth. Due to evaporative mass loss, unmelted particles that reach the surface of Earth are restricted to sizes <70 μm whereas particles >475 μm survive unmelted on Mars. Approximately 10% of particles experience temperatures below ~800 K, that is, the sublimation temperature of refractory organics found in MMs. On Earth, this fraction is significantly lower with less than 1% expected to remain below this temperature. Lower peak temperatures coupled with the larger sizes of particles surviving without significant heating on Mars suggest a much higher fraction of organic material surviving to the Martian surface.     

Moderate velocity oblique impact sliding: Production of shocked meteorite textures and palaeomagnetically important metallic spherules in planetary regoliths

We detail the production of metallic spherules in laboratory oblique shock impact experiments, and their applicability (1) to textures in a partly shock‐melted chondritic meteorite and (2) to the occurrence of palaeomagnetically important fine iron or iron alloy particles in the lunar regolith. Samples recovered from 29–44 GPa, 800 ns, experiments revealed melting and textures reminiscent of metallic spherules in the Yanzhuang H‐chondrite, including “dumbbell” forms and other more complex morphologies. Our experiments demonstrate that metallic spherules can be produced via oblique impact sliding at lower velocities (1.85 km s^?1) than are generally assumed in previous work associated with bulk‐shock melting, and that oblique impact sliding is a viable mechanism for producing spherules in shock‐induced veins in moderately shocked meteorites. Significantly, our experiments also produced fine metallic (iron alloy) spherules within the theoretical narrow size range (a few tens of nanometers for slightly ellipsoidal particles) for stable single‐domain (SSD) particles, which are the most important palaeomagnetically, since they can record lunar and planetary magnetic fields over geological time periods. The experiments also produced spherules consistent with superparamagnetic (SP) and multidomain (MD) particle sizes. The fine SSD and SP particles on the lunar surface are currently thought to have been formed predominantly by space weathering processes. Our experiments suggest that oblique shock impact sliding may be a further means of producing the SSD and SP iron or iron alloy particles observed in the lunar regolith, and which are likely to occur in the regoliths of Mercury and other planetary bodies.