40Ar-39Ar Dating of the Haughton Impact Structure

Abstract— ⁴⁰Ar-³⁹Ar dating of a strongly shocked, vesiculated gneiss clast in a breccia from the Haughton impact structure yields an isochron age of 23.4 ± 1.0 Ma. The sample contains excess ⁴⁰Ar.     

The Haughton Impact Structure,Devon Island,Canada: Setting and History of Investigations

Abstract— Although mapped initially as a piercement dome, subsequent discovery of shock metamorphism in clasts of an impact breccia, shatter cones in outcrops of uplifted target rocks and morphological and geophysical characteristics consistent with a complex crater, confirmed a meteorite impact origin for the Haughton structure, Devon Island. Results of three field investigations carried out prior to 1984 defined a complex crater, 20 km in diameter, formed in a lower Paleozoic sedimentary sequence overlying gneisses of the Precambrian basement. The distribution of allochthonous breccia overlying the disturbed target rocks and of the sediments deposited in the crater-filling lake were mapped. A Miocene or possibly Holocene age for the crater was based on paleo-flora and fauna assemblages from the lake sediments. Gravity and magnetic surveys revealed anomalies coincident with the crater, but not interpretable from surface lithologies. Some of the early investigations were of a reconnaissance nature and results and interpretation can only be considered preliminary. Other studies that were carried out in some detail, petrographic investigations in particular, require complementary work for a fuller understanding of their significance. As a result, in 1984 the HISS (Haughton Impact Structure Studies) group carried out a program of detailed geological mapping and sampling, and seismic, gravity, and magnetic surveys in an attempt to improve the definition of the surface and subsurface nature of Haughton, and to formulate a more complete understanding of its formation and subsequent history. Results of these various studies are presented in the eight succeeding papers of this volume.     

Seismic Signature of the Haughton Structure

Abstract— The western flank of the Haughton impact structure was imaged with a reflection profile generating 9.8 km of subsurface information. Ten reflecting horizons were recognized and have been correlated via a sonic log with the Paleozoic limestone/dolomite rock sequences. The seismic section is dominated by a dense and complex compound fault system with variable attitudes. These steeply dipping faults penetrated the sedimentary rocks but showed no recognizable extension into the crystalline basement. According to the seismically recognized fracture zones of the western margin, the structure is significantly larger than previously estimated. Reconstruction of the crater on the basis of the seismic information and existing scaling relationships reveals a structure with an apparent diameter of 23.9 km, and an excavated cavity of 10.3 km width and 1.97 km depth. The estimated diameters of the transient crater and the central uplift are 12 km and 11 km respectively. The morphologically distinct ring zones do not have seismically recognizable subsurface signatures. The underlying crystalline basement rocks did not exhibit seismically mappable impact-related zones of disturbance. In the central interior region, coherent reflection signals are virtually absent. Valuable information for this area was provided by a 10.26 km long refraction profile that indicated nearly uniform velocities (～5000 m/s) to a considerable depth. Major lateral variations in the velocity field across the structure were not detected.     

Gravity and Magnetic Investigations in the Haughton Impact Structure,Devon Island,Canada

Abstract— The results of a new gravity survey show that the Haughton impact structure is associated with a 24 km diameter negative Bouguer gravity anomaly with a maximum amplitude of ?12 mgal. A local minimum with a half-width of 2 km and an amplitude of ?4 mgal is located at the center of the structure. A positive magnetic total field anomaly with a half-width of 0.6 km and an amplitude of 700 nT coincides with the local central gravity anomaly. The overall negative gravity anomaly is explained by lowered rock densities due to impact-related fracturing in the crater area. The central gravity and magnetic anomalies are believed to be due to highly shocked and heated sedimentary and crystalline basement rocks forming the unexposed peak of the central uplift in the Haughton impact structure.     

Application Of Organic Geochemistry To Detect Signatures Of Organic Matter In The Haughton Impact Structure

Abstract— Organic geochemistry applied to samples of bedrock and surface sediment from the Haughton impact structure detects a range of signatures representing the impact event and the transfer of organic matter from the crater bedrock to its erosion products. The bedrock dolomite contains hydrocarbon‐bearing fluid inclusions which were incorporated before the impact event. Comparison of biomarker data from the hydrocarbons in samples inside and outside of the crater show the thermal signature of an impact. The occurrence of hydrocarbon inclusions in hydrothermal mineral samples shows that organic matter was mobilized and migrated in the immediate aftermath of the impact. The hydrocarbon signature was then transferred from bedrock to the crater‐fill lacustrine deposits and present‐day sediments in the crater, including wind‐blown detritus in snow/ice. Separate signatures are detected from modern microbial life in crater rock and sediment samples. Signatures in Haughton crater samples are readily detectable because they include hydrocarbons generated by the burial of organic matter. This type of organic matter is not expected in crater samples on other planets, but the Haughton data show that, using very high resolution detection of organic compounds, any signature of primitive life in the crater rocks could be transferred to surface detritus and so extend the sampling medium.     

The Allochthonous Polymict Breccia Layer of the Haughton Impact Crater,Devon Island,Canada

Abstract— The central allochthonous polymict breccia of the Haughton impact structure is up to about 90 m thick and as much as 7.3 km in radial extent. It has been analyzed with respect to modal composition, grain-size characteristics, and degree of shock metamorphism for the grain-size ranges 10–～ 50, 1–10, 0.03–1, and <0.03 mm. The mineralogy of the breccia matrix is dominated by dolomite and calcite, with minor amounts of quartz, other silicate minerals, and rare melt particles. The following lithic clasts have been identified in the 1–10 mm size fraction (averages of vol.% given in parentheses): dolomitic rocks (51), limestones (29), crystalline rocks (10), sandstones and siltstones (3.7), chert (0.7), melt particles (1.9). The mineral clasts (1–0.03 mm) comprise (with decreasing frequency) dolomite, quartz, calcite, feldspar, biotite, amphibole, garnet, opaques, rounded quartz derived from sandstones and accessory minerals. Lithic and mineral clasts display various degrees of shock. Fragments of crystalline rocks are shocked in the 0–60 GPa range; whole rock melts from the crystalline basement are lacking and unshocked rocks are very rare. In contrast, shock-melted sandstones, shales, and chert were found in most samples. Large clasts of these melt rocks are highly concentrated near the center of the crater. Otherwise, no distinct change of the modal composition with radial range has been observed except that the frequency of limestone clasts increases slightly with radial range. The breccia near the center is more fine-grained than that beyond about 1 km radius and the sorting parameter increases somewhat with radial range. Except for the high concentration of shock-melted sedimentary rocks and highly shocked crystalline rocks near the center of the crater, the distribution of shock stages within the lithic clast population is quite uniform throughout the breccia formation. We conclude that the breccia constituents are derived from the lower part of the target stratigraphy (deeper than about 800 m) and that the total depth of excavation at Haughton is in the order of 2000 m. The mixing of sedimentary rocks of the Eleanor River Formation, Lower Ordovician, and Cambrian (～850 m thickness) with crystalline basement rocks is quite thorough and homogeneous throughout the breccia lens, at least for the analyzed part. This may require an air-borne mode of emplacement for the upper section of the breccia in analogy to the fall-back suevite in the Ries crater. A calculation of the excavation (Z-model) and of the shock pressure attenuation based on reasonable estimates of the energy and crater geometry of the Haughton impact confirms the observed maximum depth of excavation of about 2 km. Shock-melted crystalline basement rocks, if present at all, must be confined to the very center of the structure below the excavation cavity.     

Impact metamorphism of CaCO3‐bearing sandstones at the Haughton structure,Canada

Abstract— Impact‐metamorphosed CaCO₃‐bearing sandstones at the Haughton structure have been divided into 6 classes, based to a large extent on a previous classification developed for sandstones at Meteor Crater. Class 1a sandstones (<3 GPa) display crude shatter cones, but no other petrographic indications of shock. At pressures of 3 to 5.5 GPa (class 1b), porosity is destroyed and well‐developed shatter cones occur. Class 2 rocks display planar deformation features (PDFs) and are characterized by a “jigsaw” texture produced by rotation and shear at quartz grain boundaries. Calcite shows an increase in the density of mechanical twins and undergoes micro‐brecciation in class 1 and 2 sandstones. Class 3 samples display multiple sets of PDFs and widespread development of diaplectic glass, toasted quartz, and symplectic intergrowths of quartz, diaplectic glass, and coesite. Textural evidence, such as the intermingling of silicate glasses and calcite and the presence of flow textures, indicates that calcite in class 3 sandstones has undergone melting. This constrains the onset of melting of calcite in the Haughton sandstones to > 10 < 20 GPa. At higher pressures, the original texture of the sandstone is lost, which is associated with major development of vesicular SiO₂ glass or lechatelierite. Class 5 rocks (>30 GPa) consist almost entirely of lechatelierite. A new class of shocked sandstones (class 6) consists of SiO₂‐rich melt that recrystallized to microcrystalline quartz. Calcite within class 4 to 6 sandstones also underwent melting and is preserved as globules and euhedral crystals within SiO₂ phases, demonstrating the importance of impact melting, and not decomposition, in these CaCO₃‐bearing sandstones.     

Intracrystalline lipids within sulfates from the Haughton Impact Structure—Implications for survival of lipids on Mars

Lipids can be present within gypsum as intracrystalline inclusions if they become incorporated within the mineral as is it precipitates. The lipids that comprise these inclusions are protected against alteration or destruction by an external oxidising chemical environment because a protective mineral matrix surrounds them. Sulfate minerals are abundant on the surface of Mars and were present in the samples that were analysed by the Viking landers. The quantities of secondary intracrystalline fossil-lipids that are present in samples of gypsum and gypsum-rich soils from the Haughton Impact Structure, Devon Island, Canadian High Arctic are sufficient to suggest that if a similar concentration of fossil lipids was present in the sulfate-rich samples analysed by the Viking Landers then they could have been detected. Possible reasons why a secondary fossil-lipid signature was not detected include a poor rate of conversion during pyrolysis, exposure of intracrystalline lipids during periods of weathering to oxidative martian diagenesis, a low level of biological productivity or an absence of a source for lipids on the surface of Mars. Polycyclic aromatic hydrocarbons of meteoritic origin, and terpane biomarkers such as hopanes and steranes, are not present in the Haughton gypsum in sufficient quantities to have been readily detected.     

Composition of the Crystalline Basement and Shock Metamorphism of Crystalline and Sedimentary Target Rocks at the Haughton Impact Crater,Devon Island,Canada

Abstract— About 100 cobble-sized samples collected from the surface of the central polymict breccia formation of Haughton impact crater, Canada, have been studied microscopically and chemically. Breccia clasts derived from the 1700 m deep Precambian basement consist of 13 rock types which can be grouped into sillimanite- and garnet-bearing gneiss; alkali feldspar-rich aplitic or biotite-hornblende-bearing gneiss; biotite and hornblende gneiss; apatite-rich biotite and biotite-hornblende gneiss; calcitediopside gneiss; amphibolite; tonalitic orthogneiss; and basalts. The range of chemical compositions of these rocks is wide: e.g., SiO₂ ranges from 40–85 wt.%; Al₂O₃ from 7–20 wt.%; CaO from 0.01–25 wt.%; or P₂O_s from <0.01–5 wt.%. Nearly all samples of crystalline rocks are shock metamorphosed up to about 60 GPa. Most conspicuous is the absence of whole-rock melts and the very rare occurrence of unshocked rocks. The 45 samples examined can be classified into the following shock stages: stage 0 (<5 GPa): 4.5%, stage Ia (10–20 GPa): 9.0%, stage Ib (20–35 GPa): 33%, stage II (35–45 GPa): 29%, stage III (45–55 GPa): 18%, stage III–IV (55–60 GPa): 6.5%. Among Paleozoic sedimentary rock clasts higher degrees of shock than within crystalline rocks were observed such as highly vesiculated, whole-rock melts of sandstones and shales. Within the northern and eastern sectors of the allochthonous breccia no distinct radial variation of the cobble-sized lithic clasts regarding abundance, rock type, and degree of shock was observed, with the exception that clasts of shock-melted sedimentary rocks and of highly shocked basement rocks (stage III–IV) are strongly concentrated near the center of the crater. Based on our field and laboratory investigations we conclude that vaporization and melting due to the Haughton impact affected the lower section of the sedimentary strata from about 900 to 1700 m depth (Eleanor River limestones and dolomites, Lower Ordovician and Cambrian limestones, dolomites, shales, and sandstones). The 60-GPa shock pressure isobar reached only the uppermost basement rocks so that whole rock melting of the crystalline rocks was not possible.     

The Stellar Populations of the Bars of Barred Spirals Through Evolutionary Synthesis: First Results

As part of an ongoing project aimed at studying the age and metallicity gradients of the stellar populations along the bars of a sample of barred spirals of different morphological types, we present our first results on NGC 4314 (SBa). We have obtained optical and NIR colours and spectral indices along the bar and we interpret some of these results here and discuss their uncertainties on the basis of single stellar population models. In a preliminary analysis, we constrain the limits for the age and metallicity of the nucleus and two selected regions in the star formation ring of NGC 4314, characterizing both as metal rich (Z<Z _solar) stellar populations, and finding a difference in the mean luminosity-weighted age of at least ∼ 3–4 Gyr. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sgr A*的结构和变化:银河中心的超大质量黑洞

银河中心为我们提供了一个唯一的天体物理实验室来用以研究各式各样的天体物理过程。在文中 ,我们总结和归纳了关于SgrA 观测的最新结果 ,主要涉及源的结构和在流量密度方面的变化。SgrA 现象代表着在低光度活动星系核中围绕一个超大质量黑洞的低辐射率的吸积盘外流的典型例子。从SgrA 观测得到的许多天体物理中悬而未决的问题对现存的天体物理理论是一个挑战。对SgrA 的最新理论模型也作了综述。     

Unusual Light Structure in the NOAA 12109 Sunspot Umbra: Observations and Preliminary Results

Astronomy Letters - On July 12, 2014, an unusual light structure was observed in the NOAA 12109 sunspot umbra at the Horizontal Solar Telescope of the Sayan Observatory. It differed from...     

The South Range Breccia Belt of the Sudbury Impact Structure: A possible terrace collapse feature

Abstract— The South Range Breccia Belt (SRBB) is an arcuate, 45 km long zone of Sudbury Breccia in the South Range of the 1.85 Ga Sudbury Impact Structure. The belt varies in thickness between tens of meters to hundreds of meters and is composed of a polymict assemblage of Huronian Supergroup (2.49–2.20 Ga), Nipissing Diabase (2.2 Ga), and Proterozoic granitoid breccia fragments ranging in size from a few millimeters to tens of meters. The SRBB matrix is composed of a fine‐grained (～100 μm) assemblage of biotite, quartz, and ilmenite, with trace amounts of plagioclase, zircon, titanite, epidote, pyrite, chalcopyrite, pyrrhotite, and occasionally chlorite. The SRBB hosts the Frood‐Stobie, Vermilion, and Kirkwood quartz diorite offset dykes, the former being associated with one of the largest Ni‐Cu‐PGE sulphide deposits in the world. Optical petrography and whole‐rock geochemistry concur with previous studies that have suggested that the matrix of the SRBB is derived from comminution and at least partial frictional melting of the wall rock Huronian Supergroup lithologies. Rare earth element (REE) data from all sampled lithologies associated with the SRBB exhibit crustal signatures when normalized to C1 chondrite values. Additionally, REE data from the quartz diorites, disseminated sulphides in Sudbury Breccia, and a sample of an aphanitic biotite‐hornblende tonalite dyke exhibit flat slopes when compared to the mafic and felsic norites, quartz gabbro, and granophyre units of the Sudbury Igneous Complex (SIC), which suggests that these lithologies are representative of bulk SIC melt. We suggest that the SRBB was formed by high strain‐rate (>1 m/s), gravity‐driven seismogenic slip of the inner ring of the Sudbury Impact Structure during postimpact crustal readjustment (crater modification stage). Failure of the hanging wall may have facilitated the injection of bulk SIC melt into the SRBB, along with the Ni‐Cu‐PGE sulphides of the Frood‐Stobie deposit. Postimpact Penokean (1.9–1.7 Ga) tectonism, particularly northwest‐directed shearing along the South Range Shear Zone and associated thrust faulting, could account for the present subvertical orientation of the SRBB, and the apparent lack of a connection at depth with the SIC.     

The Stratigraphy,Sedimentology, and Fossils of the Haughton Formation: A Post-Impact Crater-Fill,Devon Island,N.W.T., Canada

Abstract— After the impact that formed Haughton crater, 22.4 ± 1.4 Ma ago (early Miocene), the cavity filled with water and began to accumulate lacustrine sediments. These preserve detailed evidence of pre-impact stratigraphy and post-impact morphology and development of the crater, as well as of the climatic and biotic regime in which it lay. In this report we formally designate these sediments as the Haughton Formation, of which only a 48 m thick remnant covering approximately 7 km² still exists. Dolomite-rich, poorly-sorted silt, fine sand, and mud are the principal lithologies. The formation unconformably overlies a blanket of allochthonous impact breccia forming the floor of the original crater. Presence of a debris-flow deposit in the base of the sequence indicates that lacustine deposition began very shortly after crater formation. The Haughton Formation contains a moderately diverse and highly endemic vertebrate fauna as well as palynomorphs and plant macrofossils that indicate a cool-temperate climatic regime. A small percentage of reworked Late Cretaceous and early Tertiary palynomorphs point to the former existence of the Eureka Sound Formation in the drainage area of the crater. In addition, the distribution of the lake beds indicates the absence of an inner ring on the west side of the crater, and the 3° to 3.5° inward dip of Haughton strata implies that the central mass has subsided approximately 300 to 350 m since deposition began.     

宇宙大尺度结构对星系形成和空间排列的影响

星系的空间排列以及指向并非随机的.星系的主轴和角动量与物质的大尺度分布存在一定的指向相关.这一方向的研究将可以促进我们对结构形成机制的认识,并提供一个独立的视角去检验星系形成过程中的环境效应.本文就相关问题做了详细的探讨.     

Some New Results Concerning the Study of the Virgo Cluster Structure

The creation of a new version of MERCG the catalogue enriched by the new information, which was reduced to the uniform system in RC3 and transferred together with data from other lists into our catalogue, made it possible to study the structure of the Virgo cluster based on the statistical cviterion offered by Anosova. The study of the spatial distribution of galaxies in A and B clusters, forming the main concentration of galaxies in the Virgo cluster, made it possible to consider galaxy number density, and velocity and magnitude means for early and late type galaxies in the direction from the center to the periphery. The mean value of galaxy velocities of the B cluster appeared to be larger than that for the A cluster thus placing it farther. Investigation of the distribution of galaxy colors in the areas of the A and the B clusters revealed a statistically significant distinction, expressed in the noticeable reddening of the galaxies observed in B cluster region, with can be explained possibly by the location of HI deficient galaxies in this area of the Virgo cluster.     

Tectonic Structure,Classification, and Evolution of Arachnoids on Venus: Preliminary Results

An analysis has been done of the topography and geologic structure of arachnoids—specific radial/concentric volcannic-tectonic structures on the surface of Venus. A representative sample (53 arachnoids) from 265 structures of this type, which are listed in the catalog of volcanic structures of the surface of Venus (Crumpler and Aubele, 2000), has been studied. The overwhelming majority of arachnoids are shown to be depressions that are commonly outlined by concentric extensional structures. Following Head et al. (1992) and Aittola and Kostama (2001), the assumption is confirmed and substantiated that arachnoids are formed by gravitational relaxation of small magmatic diapirs. Several types of arachnoids are identified on the basis of an analysis of structural patterns characteristic of such structures. It is also shown that the formation of different types of arachnoids depends on the depth of the magmatic diapir under the surface, on the thickness and reologic properties of the structures superposed on the evolving magmatic diapir, and on the character of regional stress fields that arise in the process of formation of such structures. The conclusion is drawn that most of the arachnoids were formed due to the gravitational relaxation of magmatic diapirs within the brittle part of the lithosphere, and some of them appeared as a result of the gravitational relaxation of radially fractured centers—novae. It is also shown that arachnoids are long-lived and multistep structures. At least some of them began to evolve before the formation of regional plains with wrinkle ridges, and their development ended after this event.