Magmatic inclusions and felsic clasts in the Dar al Gani 319 polymict ureilite

Abstract— Magmatic inclusions occur in type II ureilite clasts (olivine‐orthopyroxene‐augite assemblages with essentially no carbon) and in a large isolated plagioclase clast in the Dar al Gani (DaG) 319 polymict ureilite. Type I ureilite clasts (olivine‐pigeonite assemblages with carbon), as well as other lithic and mineral clasts in this meteorite, are described in Ikeda et al.(2000). The magmatic inclusions in the type II ureilite clasts consist mainly of magnesian augite and glass. They metastably crystallized euhedral pyroxenes, resulting in feldspar component‐enriched glass. On the other hand, the magmatic inclusions in the large plagioclase clast consist mainly of pyroxene and plagioclase, with a mesostasis. They crystallized with a composition along the cotectic line between the pyroxene and plagioclase liquidus fields. DaG 319 also contains felsic lithic clasts that represent various types of igneous lithologies. These are the rare components not found in the common monomict ureilites. Porphyritic felsic clasts, the main type, contain phenocrysts of plagioclase and pyroxene, and their groundmass consists mainly of plagioclase, pyroxene, and minor phosphate, ilmenite, chromite, and/or glass. Crystallization of these porphyritic clasts took place along the cotectic line between the pyroxene and plagioclase fields. Pilotaxitic felsic clasts crystallized plagioclase laths and minor interstitial pyroxene under metastable conditions, and the mesostasis is extremely enriched in plagioclase component in spite of the ubiquitous crystallization of plagioclase laths in the clasts. We suggest that there are two crystallization trends, pyroxene‐metal and pyroxene‐plagioclase trends, for the magmatic inclusions and felsic lithic clasts in DaG 319. The pyroxene‐metal crystallization trend corresponds to the magmatic inclusions in the type II ureilite clasts and the pilotaxitic felsic clasts, where crystallization took place under reducing and metastable conditions, suppressing precipitation of plagioclase. The pyroxene‐plagioclase crystallization trend corresponds to the magmatic inclusions in the isolated plagioclase clast and the porphyritic felsic clasts. This trend developed under oxidizing conditions in magma chambers within the ureilite parent body. The felsic clasts may have formed mainly from albite component‐rich silicate melts produced by fractional partial melting of chondritic precursors. The common monomict ureilites, type I ureilites, may have formed by the fractional partial melting of alkali‐bearing chondritic precursors. However, type II ureilites may have formed as cumulates from a basaltic melt.     

The most primitive mesosiderite Northwest Africa 1878, subgroup 0

All mesosiderites previously reported were subjected to thermal metamorphism and/or partial melting on the parent body. Therefore, their primordial features have been mostly lost. Here, we report detailed petrological and mineralogical features on a mesosiderite, Northwest Africa (NWA) 1878. This meteorite comprises silicate lithology and aggregates of small spheroidal Fe‐Ni metal grains. Silicate lithology typically shows igneous texture without recrystallization features, and mainly consists of low‐Ca pyroxene and plagioclase. Pyroxenes often show normal zoning. Exsolution lamella of augite is rarely noticed and very thin in width, compared with other mesosiderites. A few magnesian olivine grains are encountered without typical corona texture around them. They are not equilibrated with pyroxene on a large scale. Plagioclase shows a wide compositional range. These results show that NWA 1878 hardly experienced thermal metamorphism, distinguished from mesosiderites of subgroups 1–4. Therefore, we propose that this is classified as subgroup 0 mesosiderite. Nevertheless, NWA 1878 was locally subjected to secondary reactions, such as weak reduction of pyroxene and Fe‐Mg diffusion between olivine and pyroxene, on the parent body.     

Microdistributions and petrogenetic implications of rare earth elements in polymict ureilites

Abstract— Polymict ureilites contain various mineral and lithic clasts not observed in monomict ureilites, including plagioclase, enstatite, feldspathic melt clasts and dark inclusions. This paper investigates the microdistributions and petrogenetic implications of rare earth elements (REEs) in three polymict ureilites (Elephant Moraine (EET) 83309, EET 87720 and North Haig), focusing particularly on the mineral and lithic clasts not found in monomict ureilites. As in monomict ureilites, olivine and pyroxene are the major heavy (H)REE carriers in polymict ureilites. They have light (L)REE‐depleted patterns with little variation in REE abundances, despite large differences in major element compositions. The textural and REE characteristics of feldspathic melt clasts in the three polymict ureilites indicate that they are most likely shocked melt that sampled the basaltic components associated with ureilites on their parent body. Simple REE modeling shows that the most common melt clasts in polymict ureilites can be produced by 20–30% partial melting of chondritic material, leaving behind a ureilitic residue. The plagioclase clasts, as well as some of the high‐Ca pyroxene grains, probably represent plagioclase‐pyroxene rock types on the ureilite parent body. However, the variety of REE patterns in both plagioclase and melt clasts cannot be the result of a single igneous differentiation event. Multiple processes, probably including shock melting and different sources, are required to account for all the REE characteristics observed in lithic and mineral clasts. The C‐rich matrix in polymict ureilites is LREE‐enriched, like that in monomict ureilites. The occurrence of Ce anomalies in C‐rich matrix, dark inclusions and the presence of the hydration product, iddingsite, imply significant terrestrial weathering. A search for ²⁶Mg excesses, from the radioactive decay of ²⁶Al, in the polymict ureilite EET 83309 was negative.     

Mineralogy and petrology of dark clasts in the Allan Hills 76005 polymict eucrite pairing group

The Allan Hills 76005 polymict eucrite pairing group consists of 15 paired masses recovered during six different field seasons in the Transantarctic Mountains. Although this group has been well studied in general, most of the meteorites contain a significant portion of dark clasts that have not been well characterized. The Dawn mission to Vesta discovered dark materials that provide insight into its evolution. The ALH dark clasts are thus of great interest to understanding the evolution of Vesta. Here, 45 different dark clasts from 15 different thin sections from the pairing group are characterized in detail to better understand their nature and origin. Five different textural types of dark clasts are recognized among this group—skeletal, vitrophyric, pilotaxitic, fan spherulitic, and troilite‐silica‐plagioclase‐rich clasts with aphyric or blobby textures. Mineralogy of the clasts is dominated by plagioclase and pyroxene, with minor troilite, silica, ilmenite, chromite, and rare Fe‐Ni metal. All of the textures can be produced by rapid cooling rates on the order of 60–2500°C h^?1. Bulk compositions of the clasts are demonstrably eucritic, and not chondritic, howarditic, or diogenitic. The combination of mineralogy, composition, and textures strongly suggests that the dark clasts are eucritic impact melts. Several craters on Vesta have associated orange deposits that have been proposed as impact melt breccias. The ALH pairing group may thus represent material that originated near Oppia or Octavia craters.     

Geochemistry and origin of metal,olivine clasts,and matrix in the Dong Ujimqin Qi mesosiderite

Abstract— The Dong Ujimqin Qi mesosiderite is the first recorded fall of a stony‐iron meteorite in China. According to silicate textures and metal composition, this meteorite is classified as a member of subgroup IB. Instrumental neutron activation analyses (INAA) of metals show that the matrix metal has lower concentrations of Os, Ir, Re, and Pt, but higher concentrations of Ni and Au than the 7.5 cm metal nodule present in the meteorite. We attribute these compositional differences to fractional crystallization of molten metal. Studies of olivine clasts show that FeO contents are uniform in individual olivine crystals but are variable for different olivine clasts. Although concentrations of rare earth elements (REEs) change within olivine clasts, they all exhibit a vee‐shaped pattern relative to CI chondrites. The relatively high concentrations of REEs in olivine and the shape of REE patterns require a liquid high in REEs and especially in light REEs. As such a liquid was absent from the region where basaltic and gabbroic clasts formed, mesosiderite olivine must have formed in a part of the differentiated asteroid that is different from the location where other mesosiderite silicate clasts formed.     

Petrology and mineralogy of mesosiderite Northwest Africa 12949: Implications for geological history on its parent body

Mesosiderites are breccias composed of roughly equal parts of metal phases and silicate clasts. However, the parent body and formation process of mesosiderites remain enigmatic. Northwest Africa (NWA) 12949 is a newly found mesosiderite belonging to type 2A. One type of ultramafic clasts and four types of mafic clasts (gabbroic, poikilitic, subophitic, and cataclastic), compositionally consistent with diogenites and eucrites, have been identified in NWA 12949. However, these clasts have undergone different thermal histories, with cooling rates varying from ~0.0044 °C year⁻¹ to a few °C h⁻¹, and equilibrium temperatures varying from ~880 to 910 °C to ~1000 to 1100 °C. All the lithic clasts have undergone redox reactions during extensive metamorphism, forming excess troilite, chromite, merrillite, tridymite, and pyroxene with lower Fe/Mg and Fe/Mn. The petrology and mineralogy of NWA 12949 support a formation scenario involving two major impact events, and a candidate parent body of 4 Vesta.     

PETROLOGY OF IGNEOUS LITHIC CLASTS FROM POLYMICT EUCRITES ALHA76005 AND ALHA77302

A total of seven lithic clasts from the polymict eucrites ALHA76005 and ALHA77302 have been studied petrographically and analyzed with the electron microprobe. All clasts are composed predominantly of pyroxene and plagioclase, ± ilmenite, troilite, Fe-Ni metal, mesostasis, and silica. Pyroxene compositions in unequilibrated clasts and clast bulk compositions, calculated by modal recombination, indicate that the clasts originally crystallized under similar conditions and that they may be genetically related to each other by fractionation of pigeonite and plagioclase.     

Mineralogy,petrology, and oxygen isotopic compositions of chondritic and achondritic lithologies in the anomalous CB carbonaceous chondrites Sierra Gorda 013 and Fountain Hills

The CB (Bencubbin-like) metal-rich carbonaceous chondrites are subdivided into the CB_a and CB_b subgroups. The CB_a chondrites are composed predominantly of ~cm-sized skeletal olivine chondrules and unzoned Fe,Ni-metal ± troilite nodules. The CB_b chondrites are finer grained than the CB_as and consist of chemically zoned and unzoned Fe,Ni-metal grains, Fe,Ni-metal ± troilite nodules, cryptocrystalline and skeletal olivine chondrules, and rare refractory inclusions. Both subgroups contain exceptionally rare porphyritic chondrules and no interchondrule fine-grained matrix, and are interpreted as the products of a gas–melt impact plume formed by a high-velocity collision between differentiated planetesimals about 4562 Ma. The anomalous metal-rich carbonaceous chondrites, Fountain Hills and Sierra Gorda 013 (SG 013), have bulk oxygen isotopic compositions similar to those of other CBs but contain coarse-grained igneous clasts/porphyritic chondrule-like objects composed of olivine, low-Ca-pyroxene, and minor plagioclase and high-Ca pyroxene as well as barred olivine and skeletal olivine chondrules. Cryptocrystalline chondrules, zoned Fe,Ni-metal grains, and interchondrule fine-grained matrix are absent. In SG 013, Fe,Ni-metal (~80 vol%) occurs as several mm-sized nodules; magnesiochromite (Mg-chromite) is accessory; daubréelite and schreibersite are minor; troilite is absent. In Fountain Hills, Fe,Ni-metal (~25 vol%) is dispersed between chondrules and silicate clasts; chromite and sulfides are absent. In addition to a dominant chondritic lithology, SG 013 contains a chondrule-free lithology composed of Fe,Ni-metal nodules (~25 vol%), coarse-grained olivine and low-Ca pyroxene, interstitial high-Ca pyroxene and anorthitic plagioclase, and Mg-chromite. Here, we report on oxygen isotopic compositions of olivine, low-Ca pyroxene, and ±Mg-chromite in Fountain Hills and both lithologies of SG 013 measured in situ using an ion microprobe. Oxygen isotope compositions of olivine, low-Ca pyroxene, and Mg-chromite in these meteorites are similar to those of magnesian non-porphyritic chondrules in CB_a and CB_b chondrites: on a three-isotope oxygen diagram (δ¹⁷O vs. δ¹⁸O), they plot close to a slope-1 (primitive chondrule mineral) line and have a very narrow range of Δ¹⁷O (=δ¹⁷O–0.52 × δ¹⁸O) values, −2.5 ± 0.9‰ (avr ± 2SD). No isotopically distinct relict grains have been identified in porphyritic chondrule-like objects. We suggest that magnesian non-porphyritic (barred olivine, skeletal olivine, cryptocrystalline) chondrules in the CB_as, CB_bs, and porphyritic chondrule-like objects in SG 013 and Fountain Hills formed in different zones of the CB impact plume characterized by variable pressure, temperature, cooling rates, and redox conditions. The achondritic lithology in SG 013 represents fragments of one of the colliding bodies and therefore one of the CB chondrule precursors. Fountain Hills was subsequently modified by impact melting; Fe,Ni-metal and sulfides were partially lost during this process.     

Regolith breccia Northwest Africa 7533: Mineralogy and petrology with implications for early Mars

Northwest Africa 7533, a polymict Martian breccia, consists of fine‐grained clast‐laden melt particles and microcrystalline matrix. While both melt and matrix contain medium‐grained noritic‐monzonitic material and crystal clasts, the matrix also contains lithic clasts with zoned pigeonite and augite plus two feldspars, microbasaltic clasts, vitrophyric and microcrystalline spherules, and shards. The clast‐laden melt rocks contain clump‐like aggregates of orthopyroxene surrounded by aureoles of plagioclase. Some shards of vesicular melt rocks resemble the pyroxene‐plagioclase clump‐aureole structures. Submicron size matrix grains show some triple junctions, but most are irregular with high intergranular porosity. The noritic‐monzonitic rocks contain exsolved pyroxenes and perthitic intergrowths, and cooled more slowly than rocks with zoned‐pyroxene or fine grain size. Noritic material contains orthopyroxene or inverted pigeonite, augite, calcic to intermediate plagioclase, and chromite to Cr‐bearing magnetite; monzonitic clasts contain augite, sodic plagioclase, K feldspar, Ti‐bearing magnetite, ilmenite, chlorapatite, and zircon. These feldspathic rocks show similarities to some rocks at Gale Crater like Black Trout, Mara, and Jake M. The most magnesian orthopyroxene clasts are close to ALH 84001 orthopyroxene in composition. All these materials are enriched in siderophile elements, indicating impact melting and incorporation of a projectile component, except for Ni‐poor pyroxene clasts which are from pristine rocks. Clast‐laden melt rocks, spherules, shards, and siderophile element contents indicate formation of NWA 7533 as a regolith breccia. The zircons, mainly derived from monzonitic (melt) rocks, crystallized at 4.43 ± 0.03 Ga (Humayun et al. 2013 ) and a ¹⁴⁷Sm‐¹⁴³Nd isochron for NWA 7034 yielding 4.42 ± 0.07 Ga (Nyquist et al. 2016 ) defines the crystallization age of all its igneous portions. The zircon from the monzonitic rocks has a higher Δ¹⁷O than other Martian meteorites explained in part by assimilation of regolith materials enriched during surface alteration (Nemchin et al. 2014 ). This record of protolith interaction with atmosphere‐hydrosphere during regolith formation before melting demonstrates a thin atmosphere, a wet early surface environment on Mars, and an evolved crust likely to have contaminated younger extrusive rocks. The latest events recorded when the breccia was on Mars are resetting of apatite, much feldspar and some zircons at 1.35–1.4 Ga (Bellucci et al. 2015 ), and formation of Ni‐bearing pyrite veins during or shortly after this disturbance (Lorand et al. 2015 ).     

An anomalous eucrite,Dhofar 007, and a possible genetic relationship with mesosiderites

Abstract— We studied the texture, mineralogy, and bulk chemical composition of Dhofar 007, a basaltic achondrite. Dhofar 007 is a polymict breccia that is mostly composed of coarse‐grained granular (CG) clasts with a minor amount of xenolithic components, such as a fragment of Mg‐rich pyroxene. The coarse‐grained, relict gabbroic texture, mineral chemistry, and bulk chemical data of the coarse‐grained clast indicate that the CG clasts were originally a cumulate rock crystallized in a crust of the parent body. However, in contrast to monomict eucrites, the siderophile elements are highly enriched and could have been introduced by impact events. Dhofar 007 appears to have experienced a two‐stage postcrystallization thermal history: rapid cooling at high temperatures and slow cooling at lower temperatures. The presence of pigeonite with closely spaced, fine augite lamellae suggests that this rock was cooled rapidly from higher temperatures (>0.5 °C/yr at ˜1000 °C) than typical cumulate eucrites. However, the presence of the cloudy zone in taenite and the Ni profile across the kamacite‐taenite boundaries indicates that the cooling rate was very slow at lower temperatures (˜1–10 °C/Myr at <600–700 °C). The slow cooling rate is comparable to those in mesosiderites and pallasites. The two‐stage thermal history and the relative abundance of siderophile elements similar to those for metallic portions in mesosiderites suggest that Dhofar 007 is a large inclusion of mesosiderite. However, we cannot rule out a possibility that Dhofar 007 is an anomalous eucrite.     

Microtextures and crystal chemistry of pigeonite in the ureilites ALHA77257, RKPA80239, Y‐791538, and ALHA81101

Abstract— The microtextures of pigeonite in four ureilites, Allan Hills (ALH) 77257, Reckling Peak (RKP) A80239, Yamato (Y‐) 791538, and Allan Hills A81101, chosen to span a range of composition and shock level, were investigated by transmission electron microscopy (TEM); two of the samples were also investigated by single crystal X‐ray diffraction to determine Fe²⁺‐Mg cation site partitioning. The low‐shock and compositionally homogeneous pigeonites in ALHA77257 and RKPA80329 (Wo 6.4 for both, mg 86.3 and 84.3 respectively) display irregularly spaced, shock‐induced stacking faults oriented parallel to (100), and large antiphase domains (50–100 nm). Antiphase domains have no preferential orientation. No evidence of exsolution was observed. The low‐shock Y‐791538 pigeonite is homogeneous and has higher Ca and mg (Wo 9.4, mg 91.2). TEM investigation showed spinodal decomposition, indicative of incipient exsolution; small antiphase domains were observed (～5 nm). Single crystal refinement yielded R_4s? = 5.71%, with Fe²⁺‐Mg partitioning coefficient k_d = 0.077(8) and T_c = 658(35) °C. ALHA81101 has compositionally heterogeneous pyroxenes, with large local variations in Wo and mg (Wo = 4–13, mg = 86–68). No compositional gradients from core to rim of grains were observed, and the heterogeneity is interpreted as related to cation migration during shock. In one relatively Ca‐rich region (Wo～12), TEM analysis showed augite‐pigeonite exsolution lamellae, with spacing 145(20) nm. Results for ALHA77257, RKPA80239, and Y‐791538 support a model of rapid cooling following breakup of the ureilite parent body. The presence of exsolution lamellae in ALHA81101 can be related to a local shock‐induced Ca enrichment and provides no constraint on the late cooling history.     

A NEW LL3 CHONDRITE,ALLAN HILLS A79003, AND OBSERVATIONS ON MATRICES IN ORDINARY CHONDRITES

Allan Hills A79003 is an LL3 chondrite with a petrologic subtype of 3.4 ± 0.2. Contrary to previous suggestions, it is not paired with other Allan Hills specimens. It contains haxonite, (Fe, Ni)₂₃C₆; shock-melted, ‘fizzed’ metal-troilite intergrowths; and translucent, glassy-looking Huss matrix (fine-grained, Fe-rich silicate matrix), in addition to the normal opaque and recrystallized varieties of Huss matrix. Some chondrules are partly coated with opaque matrix, others with translucent matrix. Translucent matrix is more uniform in composition and contains less S, CaO and FeO and more MgO than the opaque variety. Both kinds of matrix rimmed chondrules before consolidation of the meteorite.     

Complex origins of silicate veinlets in HED meteorites: A case study of Northwest Africa 1109

We report on the petrography and mineralogy of three types of silicate veinlets in the brecciated eucrite Northwest Africa (NWA) 1109. These include Fe‐rich olivine, Mg‐rich olivine, and pyroxene veinlets. The Fe‐rich olivine veinlets mainly infill fractures in pyroxene and also occur along grain boundaries between pyroxene and plagioclase crystals, in both nonequilibrated and equilibrated lithic clasts. The host pyroxene of Fe‐rich olivine veinlets shows large chemical variations between and within grains. The Fe‐rich olivine veinlets also contain fine‐grained Fe³⁺‐bearing chromite, highly calcic plagioclase, merrillite, apatite, and troilite. Based on texture and mineral chemistry, we argue that the formation of Fe‐rich olivine was related to fluid deposition at relatively high temperatures. However, the source of Fe‐rich olivine in the veinlets remains unclear. Magnesium‐rich olivine veinlets were found in three diogenitic lithic clasts. In one of these, the Mg‐rich olivine veinlets only occur in one of the fine‐grained interstitial regions and extend into fractures within surrounding coarse‐grained orthopyroxene. Based on the texture of the interstitial materials, we suggest that the Mg‐rich olivine veinlets formed by shock‐induced localized melting and recrystallization. Pyroxene veinlets were only observed in one clast where they infill fractures within large plagioclase grains and are associated with fine‐grained pyroxene surrounding coarse‐grained pyroxene. The large chemical variations in pyroxene and the fracture‐filling texture indicate that the pyroxene veinlets might also have formed by shock‐induced localized melting and rapid crystallization. Our study demonstrates that silicate veinlets formed by a range of different surface processes on the surface of Vesta.     

In situ laser ablation ICP‐MS analyses of dimict diogenites: Further evidence for harzburgitic and orthopyroxenitic lithologies

Trace element concentrations in pyroxene, plagioclase, and olivine were measured in five diogenite breccias previously identified as containing distinct harzburgitic (ol+opx) and orthopyroxenitic (opx) lithologies (dimict). Three samples show two distinct populations of pyroxene trace element abundances, supporting their classification as dimict. These three meteorites show increases in Y, Yb, and HREE concentrations from harzburgitic to orthopyroxenitic pyroxenes, supporting the hypothesis that the lithologies are related through fractional crystallization whereby harzburgite olivine and pyroxene crystallized from the magma first followed by orthopyroxenite pyroxene. Depletions in LREE and Eu concentrations in the orthopyroxenitic lithology are most likely due to equilibration with LREE and Eu‐rich phases, likely plagioclase, which is found primarily in that lithology. Two samples do not show evidence supporting a dimict classification. Large pyroxene trace element variation in one sample indicates that it is polymict, while uniform trace element distribution in the other suggests that it may be a monomict breccia.     

PETROLOGY OF EETA79006 AND IMPLICATIONS FOR THE FORMATION OF POLYMICT EUCRITES

A newly found polymict eucrite, EETA79006, is described. Lithic clasts are similar to those found in howardites and fall into four groups: fine-grained (aphanitic), coarse-grained, basaltic, and cataclastic. All have eucritic compositions and differ mainly in cooling and deformation histories. Some basaltic clasts cooled faster than others and may be impact melts. Analysis of pyroxene and feldspar in the matrix and in 20 lithic clasts indicates that the matrix was not derived from the observed lithic clast population. This meteorite and similar polymict eucrites may have formed by addition of younger more fractionated lithic clasts to the regolith of the parent body.     

Mineralogy,petrology, and shock history of lunar meteorite Sayh al Uhaymir 300: A crystalline impact‐melt breccia

Abstract— Sayh al Uhaymir (SaU) 300 comprises a microcrystalline igneous matrix (grain size <10 μm), dominated by plagioclase, pyroxene, and olivine. Pyroxene geothermometry indicates that the matrix crystallized at ?1100 °C. The matrix encloses mineral and lithic clasts that record the effects of variable levels of shock. Mineral clasts include plagioclase, low‐ and high‐Ca pyroxene, pigeonite, and olivine. Minor amounts of ilmenite, FeNi metal, chromite, and a silica phase are also present. A variety of lithic clast types are observed, including glassy impact melts, impact‐melt breccias, and metamorphosed impact melts. One clast of granulitic breccia was also noted. A lunar origin for SaU 300 is supported by the composition of the plagioclase (average An₉₅), the high Cr content in olivine, the lack of hydrous phases, and the Fe/Mn ratio of mafic minerals. Both matrix and clasts have been locally overprinted by shock veins and melt pockets. SaU 300 has previously been described as an anorthositic regolith breccia with basaltic components and a granulitic matrix, but we here interpret it to be a polymict crystalline impact‐melt breccia with an olivine‐rich anorthositic norite bulk composition. The varying shock states of the mineral and lithic clasts suggest that they were shocked to between 5–28 GPa (shock stages S1–S2) by impact events in target rocks prior to their inclusion in the matrix. Formation of the igneous matrix requires a minimum shock pressure of 60 GPa (shock stage >S4). The association of maskelynite with melt pockets and shock veins indicates a subsequent, local 28–45 GPa (shock stage S2–S3) excursion, which was probably responsible for lofting the sample from the lunar surface. Subsequent fracturing is attributed to atmospheric entry and probable breakup of the parent meteor.     

PROCESSES AND SUBDIVISIONS IN DIOGENITES,A MULTIVARIATE STATISTICAL ANALYSIS

Multivariate statistical techniques used on diogenite orthopyroxene analyses show the relationships that occur within diogenites and the two orthopyroxenite components (class I and II) in the polymict diogenite Garland. Cluster analysis shows that only Peckelsheim is similar to Garland class I (Fe-rich) and the other diogenites resemble Garland class II. The unique diogenite Y 75032 may be related to type I by fractionation. Factor analysis confirms the subdivision and shows that Fe does not correlate with the weakly incompatible elements across the entire pyroxene composition range, indicating that igneous fractionation is not the process controlling total diogenite composition variation. The occurrence of two groups of diogenites is interpreted as the result of sampling or mixing of two main sequences of orthopyroxene cumulates with slightly different compositions.     

High crustal diversity preserved in the lunar meteorite Mount DeWitt 12007 (Victoria Land,Antarctica)

The meteorite Mount DeWitt (DEW) 12007 is a polymict regolith breccia mainly consisting of glassy impact‐melt breccia particles, gabbroic clasts, feldspathic clasts, impact and volcanic glass beads, basaltic clasts, and mingled breccia clasts embedded in a matrix dominated by fine‐grained crystals; vesicular glassy veins and rare agglutinates are also present. Main minerals are plagioclase (typically An_>85) and clinopyroxene (pigeonites and augites, sometimes interspersed). The presence of tranquillityite, coupled with the petrophysical data, the O‐isotope data (Δ¹⁷O = ?0.075), and the FeO_tot/MnO ratios in olivine (91), pyroxene (65), and bulk rock (77) indicate a lunar origin for DEW 12007. Impactites consist of Al‐rich impact‐melt splashes and plagioclase‐rich meta‐melt clasts. The volcanic products belong to the very low titanium (VLT) or low titanium (LT) suites; an unusual subophitic fragment could be cryptomare‐related. Gabbroic clasts could represent part of a shallow intrusion within a volcanic complex with prevailing VLT affinity. DEW 12007 has a mingled bulk composition with relatively high incompatible element abundances and shows a high crustal diversity comprising clasts from the Moon's major terranes and rare lithologies. First‐order petrographic and chemical features suggest that DEW 12007 could be launch‐paired with other meteorites including Y 793274/981031, QUE 94281, EET 87521/96008, and NWA 4884.     

Oxide‐bearing and FeO‐rich clasts in aubrites

Abstract— We report the occurrence of an oxide‐bearing clast and an FeO‐rich clast from aubrites. The FeO‐rich clast in Pesyanoe is dominated by olivine and pyroxene phenocrysts with mineral compositions slightly less FeO‐rich than is typical for H chondrites. In Allan Hills (ALH) 84008, the oxide‐bearing clast consists of a single forsterite grain rimmed by an array of sulfides, oxides, and phosphides. We consider a number of possible origins. We can exclude formation by melting of oxide‐bearing chondrules and CAIs formed in enstatite chondrites. The Pesyanoe clast may have formed in a more oxidized region of the aubrite parent body or, more likely, is a foreign clast from a more oxidized parent body. The ALH 84008 clast likely formed by reaction between sulfides and silicates as a result of cooling, oxidation, or de‐sulfidization. This clast appears to be the first oxide‐bearing clast from an aubritic breccia that formed on the aubrite parent body. Identification of additional oxide‐bearing clasts in aubrites could shed light on whether this was a widespread phenomenon and the origin of these enigmatic objects.     

Petrology and geochemistry of a silicate clast from the Mount Padbury mesosiderite: Implications for metal‐silicate mixing events of mesosiderite

Abstract— Petrological and bulk geochemical studies were performed on a large silicate clast from the Mount Padbury mesosiderite. The silicate clast is composed mainly of pyroxene and plagioclase with minor amounts of ilmenite, spinel, and other accessory minerals, and it shows subophitic texture. Pyroxenes in the clast are similar to those in type 5 eucrites and could have experienced prolonged thermal metamorphism after rapid crystallization from a near‐surface melt. Ilmenite and spinel vary chemically, indicating growth under disequilibrium conditions. The clast seems to have experienced an episode of rapid reheating and cooling, possibly as a result of metal‐silicate mixing. Abundances of siderophile elements are obviously higher than in eucrites, although the clast is also extremely depleted in highly siderophile elements. The fractionated pattern can be explained by injection of Fe‐FeS melts generated by partial melting of metallic portions during metal‐silicate mixing. The silicate clast had a complex petrogenesis that could have included: 1) rapid crystallization from magma in a lava flow or a shallow intrusion; 2) prolonged thermal metamorphism to equilibrate the mineral compositions of pyroxene and plagioclase after primary crystallization; 3) metal‐silicate mixing probably caused by the impact of solid metal bodies on the surface of the mesosiderite parent body; and 4) partial melting of metal and sulfide portions (and silicate in some cases) caused by the collisional heating, which produced Fe‐FeS melts with highly fractionated siderophile elements that were injected into silicate portions along cracks and fractures.