Carbonate precipitation in artificial soils as a sink for atmospheric carbon dioxide

Turnover of C in soils is the dominant flux in the global C cycle and is responsible for transporting 20 times the quantity of anthropogenic emissions each year. This paper investigates the potential for soils to be modified with Ca-rich materials (e.g. demolition waste or basic slag) to capture some of the transferred C as geologically stable CaCO₃. To test this principal, artificial soil known to contain Ca-rich minerals (Ca silicates and portlandite) was analysed from two sites across NE England, UK. The results demonstrate an average C content of 30 ± 15.3 Kg C m⁻² stored as CaCO₃, which is three times the expected organic C content and that it has accumulated at a rate of 25 ± 12.8 t C ha⁻¹ a⁻¹ since 1996. Isotopic analysis of the carbonates gave values between −6.4‰ and −27.5‰ for δ¹³C and −3.92‰ and −20.89‰ for δ¹⁸O, respectively (against V-PDB), which suggests that a combination of carbonate formation mechanisms are operating including the hydroxylation of gaseous CO₂ in solution, and the sequestration of degraded organic C with minor remobilisation/precipitation of lithogenic carbonates. This study implies that construction/development sites may be designed with a C capture function to sequester atmospheric C into the soil matrix with a maximum global potential of 290 Mt C a⁻¹.     

The sources and evolution of mineralising fluids in iron oxide–copper–gold systems, Norrbotten, Sweden: Constraints from Br/Cl ratios and stable Cl isotopes of fluid inclusion leachates

We have analysed the halogen concentrations and chlorine stable isotope composition of fluid inclusion leachates from three spatially associated Fe-oxide ± Cu ± Au mineralising systems in Norrbotten, Sweden. Fluid inclusions in late-stage veins in Fe-oxide–apatite deposits contain saline brines and have a wide range of Br/Cl molar ratios, from 0.2 to 1.1 × 10⁻³ and δ³⁷Cl values from −3.1‰ to −1.0‰. Leachates from saline fluid inclusions from the Greenstone and Porphyry hosted Cu–Au prospects have Br/Cl ratios that range from 0.2 to 0.5 × 10⁻³ and δ³⁷Cl values from −5.6‰ to −1.3‰. Finally, the Cu–Au deposits hosted by the Nautanen Deformation Zone (NDZ) have Br/Cl molar ratios from 0.4 to 1.1 × 10⁻³ and δ³⁷Cl values that range from −2.4‰ to +0.5‰, although the bulk of the data fall within 0‰ ± 0.5‰.The Br/Cl ratios of leachates are consistent with the derivation of salinity from magmatic sources or from the dissolution of halite. Most of the isotopic data from the Fe-oxide–apatite and Greenstone deposits are consistent with a mantle derived source of the chlorine, with the exception of the four samples with the most negative values. The origin of the low δ³⁷Cl values in these samples is unknown but we suggest that there may have been some modification of the Cl-isotope signature due to fractionation between the mineralising fluids and Cl-rich silicate assemblages found in the alteration haloes around the deposits. If such a process has occurred then a modified crustal source of the chlorine for all the samples cannot be ruled out although the amount of fractionation necessary to generate the low δ³⁷Cl values would be significantly larger.The source of Cl in the NDZ deposits has a crustal signature, which suggests the Cl in this system may be derived from (meta-) evaporites or from input from crustal melts such as granitic pegmatites of the Lina Suite.     

Variations of stable isotopes with depth in regolith calcite cements in the Broken Hill region, Australia: Palaeoclimate evolution signal?

Twenty two samples of calcretes from seven depth-profiles in the Menindee catchment, Broken Hill region, Australia were analysed for their inorganic and organic carbon contents and inorganic carbon and oxygen isotopes. The organic carbon content is very low (from 0.06 to 0.31 wt.%) while inorganic carbon (carbonate) is up to 3.9 wt.%. Both δ¹³C and δ¹⁸O become more positive closer to the surface. Carbon isotopes vary from − 8.5‰ to −5.5‰ PDB. Oxygen isotopes vary from − 6‰ to − 1.8‰ V-PDB. Depth-related δ¹³C and δ¹⁸O variations correlate over at least 15 km and show no significant variation along the flow path. δ¹³C values increase by 3‰ and δ¹⁸O values increase by 4‰ with decreasing depth in a 1.40 m thick soil profile. The variation is interpreted to indicate an increasingly elevated air temperature, greater water stress and subsequently an aridification of the area through time. The Broken Hill calcrete data confirm that climatic evolution can be deduced from isotopic series and be applied successfully to the Broken Hill region.     

The origin of dolomite associated with salt diapirs in central Tunisia: Preliminary investigations of field relationships and geochemistry

Black and white dolomite crystals (mm to cm width) of different isotopic composition are associated with Triassic diapirism in central Tunisia, as well as with evaporite minerals and clays. The white dolomites occur mostly in the Jabal Hadifa diapir near the contact with Cretaceous limestones, whereas the smaller black dolomites occur in the Jabal Hamra diapir. The former dolomite has a narrow range of δ¹⁸O and δ¹³C values (− 3.83‰ to − 6.60‰ VPDB for δ¹⁸O; − 2.11‰ to − 2.83‰ VPDB for δ¹³C), whereas the latter dolomite has a wider range and more depleted values (− 4.92‰ to − 9.97‰ for δ¹⁸O; − 0.55‰ to − 6.08‰ for δ¹³C). However, the ⁸⁷Sr / ⁸⁶Sr ratios of most of the samples are near Triassic seawater values. Dolomite formation is due to at least two different fluids. The main fluid originated from deeper hydrothermal or basinal sources related to the Triassic saliferous rocks and ascended through faults during the diapiric intrusion. The second, less important fluid source is related to meteoric water originating from Cretaceous rocks.     

Fluid inclusion and stable isotope study of the Cobre–Babilonia polymetallic epithermal vein system, Taxco district, Guerrero, Mexico

The Cobre–Babilonia vein system formed during a single major hydrothermal stage and is part of the Taxco district in Guerrero, southern Mexico. Homogenization and ice melting temperatures range from 160 to 290 °C and from − 11.6 to − 0.5 °C, respectively. We determined an approximate thermal gradient of 17 to 20 °C per 100 m using fluid inclusions. A thermal peak marked by the 290 °C isotherm is interpreted as a major feeder channel to the veins. The highest content of Zn + Pb in ore coincides with the 220 and 240 °C isotherms. Salinities of mineralizing fluids range from 0.8 to 15.6 wt.% NaCl equiv, and are distributed in two populations that can be related with barren or ore-bearing vein sections, with 0.8 to 6 wt.% NaCl equiv and 7 to 15.6 wt.% NaCl equiv, respectively. δ¹³C and δ¹⁸O water values from calcite from the Cobre–Babilonia vein system and the Esperanza Vieja and Guadalupe mantos range − 5.4‰ to − 10.4‰ and 9.9‰ to 13.4‰, respectively. δ³⁴S values range from 0‰ to 3.2‰ and − 0.7‰ to − 4.3‰ in sphalerite, − 4‰ to 0.9‰ in pyrite, and − 1.4‰ to − 5.5‰ in galena. Both fluid inclusion and stable isotope data are compatible with magmatic and meteoric sources for mineralizing fluids. Also, sulfur isotope compositions suggest both magmatic and sedimentary sources for sulfur.     

Geochemistry and evolution of ore-forming fluids of the Yueshan Cu–Au skarn- and vein-type deposits, Anhui Province, South China

The Yueshan mineral belt is geotectonically located at the centre of the Changjiang deep fracture zone or depression of the lower Yangtze platform. Two main types of ore deposits occur in the Yueshan orefield: Cu–Au–(Fe) skarn deposits and Cu–Mo–Au–(Pb–Zn) hydrothermal vein-type deposits. Almost all deposits of economic interest are concentrated within and around the eastern and northern branches of the Yueshan dioritic intrusion. In the vicinity of the Zongpu and Wuhen intrusions, there are many Cu–Pb–Zn–Au–(S) vein-type and a few Cu–Fe–(Au) skarn-type occurrences.Fluid inclusion studies show that the ore-forming fluids are characterised by a Cl⁻(S)–Na⁺–K⁺ chemical association. Hydrothermal activity associated with the above two deposit types was related to the Yueshan intrusion. The fluid salinity was high during the mineralisation processes and the fluid also underwent boiling and mixed with meteoric water. In comparison, the hydrothermal activity related to the Zongpu and Wuhen intrusions was characterised by low salinity fluids. Chlorine and sulphur species played an important role in the transport of ore-forming components.Hydrogen- and oxygen-isotope data also suggest that the ore-forming fluids in the Yueshan mineral belt consisted of magmatic water, mixed in various proportions with meteoric water. The enrichment of ore-forming components in the magmatic waters resulted from fluid–melt partitioning. The ore fluids of magmatic origin formed large Cu–Au deposits, whereas ore fluids of mixed magmatic-meteoric origin formed small- to medium-sized deposits.The sulphur isotopic composition of the skarn- and vein-type deposits varies from − 11.3‰ to + 19.2‰ and from + 4.2‰ to + 10.0‰, respectively. These variations do not appear to have been resulted from changes of physicochemical conditions, rather due to compositional variation of sulphur at the source(s) and by water–rock interaction. Complex water–rock interaction between the ore-bearing magmatic fluids and sedimentary wall rocks was responsible for sulphur mixing. Lead and silicon isotopic compositions of the two deposit types and host rocks provide similar indications for the sources and evolution of the ore-forming fluids.Hydrodynamic calculations show that magmatic ore-forming fluids were channelled upwards into faults, fractures and porous media with velocities of 1.4 m/s, 9.8 × 10^− 1 to 9.8 × 10^− 7 m/s and 3.6 × 10^− 7 to 4.6 × 10^− 7 m/s, respectively. A decrease of fluid migration velocity in porous media or tiny fractures in the contact zones between the intrusive rocks and the Triassic sedimentary rocks led to the deposition of the ore-forming components. The major species responsible for Cu transport are deduced to have been CuCl, CuCl₂⁻, CuCl₃²⁻ and CuClOH, whereas Au was transported as Au₂(HS)₂S²⁻, Au(HS)₂⁻, AuHS and AuH₃SiO₄ complexes. Cooling and a decrease in chloride ion concentration caused by fluid boiling and mixing were the principal causes of Cu deposition. Gold deposition was related to decrease of pH, total sulphur concentration and fO₂, which resulted from fluid boiling and mixing.Geological and geochemical characteristics of the two deposit types in the Yueshan mineral belt suggest that there is a close genetic relationship with the dioritic magmatism. Geochronological data show that the magmatic activity and the mineralisation took place between 130 and 136 Ma and represent a continuous process during the Yanshanian time. The cooling of the intrusions and the mineralisation event might have lasted about 6 Ma. The cooling rate of the magmatic intrusions was 80 to 120 °C my^− 1, which permitted sufficient heat supply by magma to the ore-forming system.     

Fluid geochemistry in the Ivigtut cryolite deposit, South Greenland

The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na₃AlF₆] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO₂, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO₂ and H₂O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ¹³C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ¹⁸O of CO₂ (+ 21 to + 42‰ VSMOW) and δ¹⁸O of H₂O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H₂O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.     

11 Å tobermorite from cement bypass dust and waste container glass: A feasibility study

A novel one-step hydrothermal synthesis of 11 Å tobermorite, a cation exchanger, from a unique combination of waste materials is reported. 11 Å tobermorite was prepared from stoicheiometric quantities of cement bypass dust and waste container glass at 100 °C in water. The product also comprised 10 wt.% calcite and trace quartz as residual parent phases from the cement bypass dust. In a batch sorption study at 20 °C the uptakes of Cd²⁺ and Pb²⁺ by the waste-derived tobermorite product were found to be 171 mg g^− 1 and 467 mg g^− 1, respectively, and in both cases the removal process could be described using a simple pseudo-second-order rate model (k₂ = 2.30 × 10^− 5 g mg^− 1 min^− 1 and 5.09 × 10^− 5 g mg^− 1 min^− 1, respectively). The sorption characteristics of the 11 Å tobermorite are compared with those of other waste-derived sorbents and potential applications are discussed.     

Sources and transport of carbon and nitrogen in the River Sava watershed, a major tributary of the River Danube

Carbon and nitrogen dynamics were examined throughout the River Sava watershed, a major tributary of the River Danube, in 2005 and 2006. The River Sava exported 2.1 × 10¹¹ mol C/yr as dissolved inorganic carbon (DIC), and emitted 2.5 × 10¹⁰ mol C/yr as CO₂ to the atmosphere. Stable carbon isotope ratios indicate that up to 42% of DIC originated from carbonate weathering and 23% from degradation of organic matter. Loads of dissolved and particulate organic carbon increased with discharge and export rates were calculated to be 2.1 × 10¹⁰ mol C/yr and up to 4.1 × 10⁹ mol C/yr, respectively. Isotopic compositions (δ¹³C and δ¹⁵N) and C/N ratios indicated that soil organic matter was the dominant source of particulate organic matter for 59% of the samples. Eighteen percent of the samples were dominated by plankton, 12% by periodic inputs of fresh terrestrial plant detritus with C/N > 15, and about 11% of the samples were dominated by the contribution of aquatic vascular plants. Nitrate inputs were controlled by land use in the River Sava watershed. δ¹⁵N_NO3 values <6‰ were found in predominantly forested watersheds, while values >6‰ typically represented watersheds with a higher percentage of agricultural and/or urban land use. Elevated δ¹⁵N_NO3 values (up to +25.5‰) at some sites were probably due to the combined effects of low-flow and inputs from sewage and/or animal waste.     

Magnetic anisotropy of calcite at room-temperature

The intrinsic room temperature magnetic properties of pure calcite were determined from a series of natural crystals, and they were found to be highly dependent on the chemical composition. In general, dia-, para-, and ferromagnetic components contribute to the magnetic susceptibility and the anisotropy of magnetic susceptibility (AMS). With a combination of magnetic measurements and chemical analysis these three contributions were determined and related to their mineralogical sources. The intrinsic diamagnetic susceptibility of pure calcite is − 4.46 ± 0.16 × 10^− 9 m³/kg (− 12.09 ± 0.5 × 10^− 6 SI) and the susceptibility difference is 4.06 ± 0.03 × 10^− 10 m³/kg (1.10 ± 0.01 × 10^− 6 SI). These diamagnetic properties are easily dominated by other components. The paramagnetic contribution is due to paramagnetic ions in the crystal lattice that substitute for calcium; these are mainly iron and manganese. The measured paramagnetic susceptibility agrees with the values calculated from the known concentration of paramagnetic ions in the crystals according to the Curie law of paramagnetic susceptibility. Substituted iron leads to an increase in the AMS. The paramagnetic susceptibility difference was found to correlate linearly with the iron content for concentrations between 500 and 10,000 ppm. An empirical relation was determined: (k₁ − k₃)^para (kg/m³) = Fe-content (ppm) × (1 ± 0.1) × 10^− 12 (kg/m³/ppm). The maximum susceptibility difference (Δk = k₁ − k₃) was found to be unaffected by iron contents below 100 ppm. Ferromagnetic contributions due to inclusions of ferromagnetic minerals can dominate the susceptibility. They were detected by acquisition of isothermal remanent magnetization (IRM) and their contribution to the AMS was separated by high-field measurements.     

Fluid flow record from fracture-fill calcite in the Eocene limestones from the South-Pyrenean Basin (NE Spain) and its relationship to oil shows

The presence of oil shows associated with fractures provides a significant opportunity to a) unravel the type, origin and evolution of fluids involved in fracture-fills, and b) examine how they relate to oil migration. Two stages of calcite cement (C1 and C2) were distinguished in the fractures of the Eocene Armàncies platform carbonates; C1 is characterised by fence-like crystals, exhibits dull red luminescence and contains abundant twin planes, inclusions and δ¹⁸O values that range from − 6.2‰ to − 4.8‰ VPDB. C2 consists of blocky clean crystals, is characterized by dark brown-red luminescence that alternates with yellow bands, and contains hydrocarbon fluid inclusions with homogenisation temperatures of approximately 120 °C. δ¹⁸O values range from − 9.6‰ to − 8.9‰ VPDB. The remaining porosity after C2 precipitation is filled with liquid oil that reached 115 °C. This would seem to indicate that free oil and fluid inclusions oil probably come from the same migration pulse. Oil migration timing was coeval with C2 and continued after calcite cementation was completed.     

Fluctuation in proteinaceous labile organic matter verified with degradation rate constants of terrestrial biochemical indicators

Biogenic amino acids, taken as representative of organic matter, were analyzed to determine the apparent degradation rate constant in boreal terrestrial sediment. Age determination using ¹⁴C dating gave two rate constants: the initial degradation rate constant for glycine (k_{GLY 1}), the simplest amino acid, was 1.5 × 10⁻³ yr⁻¹ (r = 0.97) until about 2200 yr BP. After the inflection point, the rate constant k_{GLY 2} was 9.1 × 10⁻⁵ yr⁻¹ (r = 0.73). The degradation of amino acids in the labile organic matter in the sediment was markedly affected by rapid processes. After the inflection point, the rate constant profiles for sub-surface amino acids were shown to have discontinuous relationships with sediment age. One pattern which emerged in the vertical distribution is that the biogenic amino acid degradation rate constant k was far greater in the labile organic matter phase than that in the refractory organic matter over the past 10,000 years.     

Lower Eocene carbonate-cemented “chimney” structures (Varna, Bulgaria) — Control of seepage rates on their formation and stable isotopic signature

The genesis of Lower Eocene calcite-cemented columns, “pisoid”-covered structures and horizontal interbeds, clustered in dispersed outcrops in the Pobiti Kamani area (Varna, Bulgaria) is related to fossil processes of hydrocarbon migration. Field observations, petrography and stable isotope geochemistry of the cemented structures and associated early-diagenetic veins, revealed that varying seepage rates of a single, warm hydrocarbon-bearing fluid, probably ascending along active faults, controlled the type of structure formed and its geochemical signature. Slow seepage allowed methane to oxidize within the sediment under ambient seafloor conditions (δ¹⁸O = − 1 ± 0.5‰ V-PDB), explaining columns' depleted δ¹³C ratios of − 43‰. Increasing seepage rates caused methane to emanate into the water column (δ¹³C = − 8‰) and raised precipitation temperatures (δ¹⁸O = − 8‰). Calcite-cemented conduits formed and upward migrating fluids also affected interbed cementation. Even higher-energy fluid flow and temperatures likely controlled the formation of “pisoids”, whereby sediment was whirled up and cemented.     

Origin of coarse-crystalline calcite cement in Early Ordovician carbonate rocks, Ordos basin, northern China: Insights from oxygen and carbon isotopes and fluid inclusion microthermometry

The calcite cement in the Lower Ordovician Majiagou Formation in the Ordos basin in northern China can be subdivided into three groups based on preliminary results of oxygen and carbon isotopes and fluid inclusion microthermometry. Group 1 has low oxygen isotopes (− 14‰ to − 18‰), low T_h values (92–103 °C), and low salinities (1.7–4.9 wt.% NaCl equivalent) and is interpreted to have precipitated during early burial from porewater influenced by meteoric water. Group 2 has much higher oxygen isotope values (− 5‰ to − 8‰), which, coupled with the higher T_h values (136–151 °C), suggest that the calcite was precipitated from fluids that were significantly enriched in ¹⁸O, possibly resulting from fluid–rock reaction during burial. Group 3 occurring along fractures is characterized by high salinities (21–28 wt.% NaCl equivalent) and is interpreted to have been precipitated from locally preserved residual evaporitic brines. The occurrence of primary hydrocarbon inclusions and its low carbon isotopes (− 11‰ to − 15‰) suggest that precipitation of group 3 calcite took place in the presence of hydrocarbons.     

Hydrochemistry and isotope compositions of groundwater from the Shihongtan sandstone-hosted uranium deposit, Xinjiang, NW China

Groundwaters and surface water in the Shihongtan sandstone-hosted U ore district, Xinjiang, NW China, were sampled and analyzed for their major-, and trace element concentrations and oxygen, hydrogen, boron and strontium isotope compositions in order to assess the possible origins of the waters and water–rock interactions that occurred in the deep aquifer system. The waters in the study district have been grouped into three hydrochemical facies: Facies 1, potable spring-water, is a pH neutral (7.0), Na–Ca–HCO₃ type water with low total dissolved solids (TDS; 0.2 g/l, fresh) and has δ¹⁸O of − 8.3‰, δD of − 48.2‰,δ¹¹B of 1.5‰, and ⁸⁷Sr/⁸⁶Sr of 0.70627. Facies 2 groundwaters are mildly acidic to mildly alkaline (pH of 6.5–8.0, mean 7.3), Na–Ca–Mg–Cl–SO₄ type waters with moderate TDS (8.2 g/l–17.2 g/l, mean 9.3 g/l, brackish) and haveδ¹⁸O values in the − 5.8‰ to − 9.3‰ range (mean − 8.1‰), δD values in the − 20.8‰ to − 85.5‰ range (mean − 47.0‰),δ¹¹B values in the + 9.5‰ to + 39.1‰ range (mean + 17.1‰), and ⁸⁷Sr/⁸⁶Sr values in the 0.70595 to 0.70975 range (mean 0.70826). Facies 3, Aiting Lake water, is a mildly alkaline (pH = 7.4), Na–Ca–Mg–Cl–SO₄ type water with the highest TDS (249.1 g/l, brine) and has δ¹⁸O of − 2.8‰, δD of − 45.8‰,δ¹¹B of 21.2‰, and ⁸⁷Sr/⁸⁶Sr of 0.70840. The waters from the study district show a systematic increase in major, trace element and TDS concentrations and δ¹¹B values along the pathway of groundwater migration which can only be interpreted in terms of water–rock interaction at depth and strong surface evaporation. The hydrochemical and isotopic data presented here confirm that the groundwaters in the Shihongtan ore district are the combined result of migration, water–rock interaction and mixing of meteoric water with connate waters contained in sediments.     

Comparison of methods for the estimation of pyrite oxidation rate in a waste rock pile at Mine Doyon site, Quebec, Canada

Several methods were evaluated and compared for the estimation of pyrite oxidation rates (POR) in waste rock at Mine Doyon, Quebec, Canada. Methods based on data collected in situ, such as the interpretation of temperature and oxygen concentration profiles (TOP) measured in the waste rock pile and pyrite mass balance (PMB) on solid phase samples were compared with the oxygen consumption measurements (OCM) in closed chamber in the laboratory. A 1-D analytical solution to a gas and heat transport equation used temperature and oxygen profiles (TOP) measured in the pile for the preliminary POR estimates at a site close to the slope of the pile (Site 6) and in the core of the pile (Site 7). Resulting POR values were 1.1 × 10^− 9 mol(O₂) kg^− 1 s^− 1 and 1.0 × 10^− 10 mol(O₂) kg^− 1 s^− 1 for the slope site and the core site, respectively. Oxidation rates based on pyrite mass balance (PMB) calculations for solid samples were 2.21 × 10^− 9 mol(O₂) kg^− 1 s^− 1 and 2.03 × 10^− 9 mol(O₂) kg^− 1 s^− 1, respectively, for the same slope and core sites, but the difference between sites was within the error margin. The OCM measurements in the laboratory on fresh waste rock samples yielded higher POR values than field methods, with average oxidation rate of 6.7 × 10^− 8 mol(O₂) kg^− 1 s^− 1. However, the OCM results on weathered and decomposed material from the rock stockpile (average oxidation rate 3.4 × 10^− 9 mol(O₂) kg^− 1 s^− 1) were consistent with results from the field-based estimates. When POR values based on fresh material are excluded, the remaining POR values for all methods range from 1.0 × 10^− 10 to 3.4 × 10^− 9 mol(O₂) kg^− 1 s^− 1. The lowest estimated value (1.0 × 10^− 10 mol(O₂) kg^− 1 s^− 1) was based on TOP estimates in the interior of the pile where oxygen transport was limited by diffusion from the surface. These results suggest that small-scale OCM laboratory experiments may provide relatively representative values of POR in the zones of waste rock piles in which oxygen transport is not dominated by diffusion.     

Dolomite formation in breccias at the Musandam Platform border, Northern Oman Mountains, United Arab Emirates

The presence of dolomite breccia patches along Wadi Batha Mahani suggests large-scale fluid flow causing dolomite formation. The controls on dolomitization have been studied, using petrography and geochemistry. Dolomitization was mainly controlled by brecciation and the nearby Hagab thrust. Breccias formed as subaerial scree deposits, with clay infill from dissolved platform limestones, during Early Cretaceous emergence. Cathodoluminescence of the dolostones indicates dolomitization took place in two phases. First, fine-crystalline planar-s dolomite replaced the breccias. Later, these dolomites were recrystallized by larger non-planar dolomites. The stable isotope trend towards depleted values (δ¹⁸O: − 2.7‰ to − 10.2‰ VPDB and δ¹³C: − 0.6‰ to − 8.9‰ VPDB), caused by mixing dolomite types during sampling, indicates type 2 dolomites were formed by hot fluids. Microthermometry of quartz cements and karst veins, post-dating dolomites, also yielded high temperatures. Hot formation waters which ascended along the Hagab thrust are invoked to explain type 2 dolomitization, silicification and hydrothermal karstification.     

A method for determining both diffusion and sorption coefficients of rock medium within a few days by adopting a micro-reactor technique

Migration properties characterized by physico-chemical factors such as distribution coefficient (K_d) and diffusion coefficient (D_e) are of great concern in performance assessment of high-level radioactive waste disposal in a deep geologic environment. These coefficients are normally obtained with different sample geometries using conventional methods, i.e., crushed samples by the batch sorption method for K_d determination and block samples by the through-diffusion method for D_e. A size dependence on both K_d and D_e has been reported and an additional correction due to size difference is required to maintain consistency of the data set. A fast method was developed, hereafter referred to as the micro-channel method, to determine both the sorption coefficient (R_d) and D_e using non-crushed rock sample by adopting the micro-reactor technique. In this method, a radionuclide solution is injected into a micro-channel (20 mm length, 4 mm width, 160 μm depth), which is in contact with a plate-shaped rock sample. A part of the injected radionuclide can diffuse into the rock matrix and/or adsorb on the rock surface and this results in an inlet-outlet concentration difference. A breakthrough curve is easily obtained with a short observation period because the injection amount is extremely small and is comparable to that escaping by diffusion into the matrix. The breakthrough curve is analyzed by a two-dimensional diffusion-advection equation to evaluate R_d and D_e.In the present study, tritiated water (specific activity, 1.2 × 10⁴ Bq/mL; pH, 6) was injected into the micro-channel, and the breakthrough curve of ³H obtained. A series of experiments was carried out by changing the flow rate of the tritiated water (2.6 × 10⁻⁵–7.7 × 10⁻⁴ m/s). Rock samples were biotite granite from the Makabe area, Japan. The diffusion coefficient evaluated by least squares fitting to the numerical solutions (D_e = 1.5 × 10⁻¹¹ m²/s) agreed well with that obtained by the through-diffusion method (1.3 × 10⁻¹¹ m²/s). The breakthrough curve of Cs ([Cs] = 1.0 × 10⁻⁷ mol/L, pH 6) labeled with ¹³⁴Cs (specific activity adjusted to 4.9 × 10¹ Bq/mL) was also obtained. A nearly constant R_d value (5.5 × 10⁻² m³/kg) was found when the flow rate was less than 2.5 × 10⁻⁴ m/s. This implied that the sorption equilibrium is reached and K_d is obtained by the present method. This value was almost identical to K_d obtained by the batch sorption method (5.0 × 10⁻² m³/kg), but the testing period was very different; 1 day and 7 days, respectively. It is concluded that application of the micro-channel method provided advantages when compared with the conventional methods.     

Iron isotopes in acid mine waters and iron-rich solids from the Tinto–Odiel Basin (Iberian Pyrite Belt, Southwest Spain)

The isotopic composition of Fe was determined in water, Fe-oxides and sulfides from the Tinto and Odiel Basins (South West Spain). As a consequence of sulfide oxidation in mine tailings both rivers are acidic (1.45 < pH < 3.85) and display high concentrations of dissolved Fe (up to 420 mmol l^− 1) and sulphates (up to 1190 mmol l^− 1).The δ⁵⁶Fe of pyrite-rich samples from the Rio Tinto and from the Tharsis mine ranged from − 0.56 ± 0.08‰ to + 0.25 ± 0.1‰. δ⁵⁶Fe values for Fe-oxides precipitates that currently form in the riverbed varied from − 1.98 ± 0.10‰ to 1.57 ± 0.08‰. Comparatively narrower ranges of values (− 0.18 ± 0.08‰ and + 0.21 ± 0.14‰) were observed in their fossil analogues from the Pliocene–Pleistocene and in samples from the Gossan (the oxidized layer that formed through exposure to oxygen of the massive sulfide deposits) (− 0.36 ± 0.12‰ to 0.82 ± 0.07‰). In water, δ⁵⁶Fe values ranged from − 1.76 ± 0.10‰ to + 0.43 ± 0.05‰.At the source of the Tinto River, fractionation between aqueous Fe(III) and pyrite from the tailings was less than would be expected from a simple pyrite oxidation process. Similarly, the isotopic composition of Gossan oxides and that of pyrite was different from what would be expected from pyrite oxidation. In rivers, the precipitation of Fe-oxides (mainly jarosite and schwertmannite and lesser amounts of goethite) from water containing mainly (more than 99%) Fe(III) with concentrations up to 372 mmol l^− 1 causes variable fractionation between the solid and the aqueous phase (− 0.98‰ < Δ⁵⁶Fe_{solid–water} < 2.25‰). The significant magnitude of the positive fractionation factor observed in several Fe(III) dominated water may be related to the precipitation of Fe(III) sulphates containing phases.     

Some parameters of rockbursts derived from underground seismological measurements

A total of 240 three-component recordings from 80 rockbursts, which occurred in various coal mines in the Ostrava-Karviná Coal Basin (Czech Republic) between 1993 and 2005, was used to examine the decrease in maximum particle velocities u_i (m/s) with a scaled distance of d = d/√E (m/√J) or d/³√E (m/³√J) and the rate of predominant frequencies of body waves. The energetic span of rockbursts was within the interval of E = 6.2 × 10³ − 5.0 × 10⁸ J, while calculated hypocentral distances d of four underground seismic stations varied from 0.6 to 7 km. The slopes b of regression straight lines for the maximum particle velocities u_i (m/s) of P- and S-waves in the bilogarithmic scale correspond to the values of − 1.004, − 1.297, − 1.183 and − 1.527. The results of the linear regression are as follows:

P_max-waves u_i = 1.184 × 10^− 4 × d^− 1.004 (m/s) (square root scaling)

P_max-waves u_i = 3.055 × 10^− 3 × d^− 1.297 (m/s) (cube root scaling)

S_max-waves u_i = 5.280 × 10^− 4 × d^− 1.183 (m/s) (square root scaling)

S_max-waves u_i = 2.397 × 10^− 2 × d^− 1.527 (m/s) (cube root scaling).

The evaluation of the abovementioned dynamic parameters was based on seismic events data gathered in the database of the regional seismic array, and calculations were carried out either by using special programs applied as part of the automated data processing in the computation center, or by usual linear regression approaches. The aim of the detailed analysis of the maximum particle velocity and predominant frequencies was a) to set up input data from underground seismological observations for laboratory experiments dealing with the comparison of rock mass behaviour under modeled laboratory conditions simulating manifestation of rockbursts, and b) to incorporate particle velocity into the design of support in order to control damage and evident devastation of workings by rockbursts. The investigation of peak particle velocities was based on the recognition that they are the best criterion to assess vibration damage to surface structures and in mines.