Regional prospectivity analysis for hydrothermal-remobilised nickel mineral systems in western Victoria,Australia

Fuzzy logic mineral prospectivity modelling was performed to identify camp-scale areas in western Victoria with an elevated potential for hydrothermal-remobilised nickel mineralisation. This prospectivity analysis was based on a conceptual mineral system model defined for a group of hydrothermal nickel deposits geologically similar to the Avebury deposit in Tasmania. The critical components of the conceptual model were translated into regional spatial predictor maps combined using a fuzzy inference system. Applying additional criteria of land use restrictions and depth of post-mineralisation cover, downgrading the exploration potential of the areas within national parks or with thick barren cover, allowed the identification of just a few potentially viable exploration targets, in the south of the Grampians-Stavely and Glenelg zones. Uncertainties of geological interpretations and parameters of the conceptual mineral system model were explicitly defined and propagated to the final prospectivity model by applying Monte Carlo simulations to the fuzzy inference system. Modelling uncertainty provides additional information which can assist in a further risk analysis for exploration decision making.     

Data fusion and porphyry copper prospectivity models,southeastern Arizona

Mineral exploration programs commonly use a combination of geological, geophysical and remotely sensed data to detect sets of optimal conditions for potential ore deposits. Prospectivity mapping techniques can integrate and analyse these digital geological data sets to produce maps that identify where optimal conditions converge. Three prospectivity mapping techniques – weights of evidence, fuzzy logic and a combination of these two methods – were applied to a 32,000 km² study area within the southeastern Arizona porphyry Cu district and then assessed based on their ability to identify new and existing areas of high mineral prospectivity. Validity testing revealed that the fuzzy logic method using membership values based on an exploration model identified known Cu deposits considerably better than those that relied solely on weights of evidence, and slightly better than those that used a combination of weights of evidence and fuzzy logic. This led to the selection of the prospectivity map created using the fuzzy logic method with membership values based on an exploration model. Three case study areas were identified that comprise many critical geological and geophysical characteristics favourable to hosting porphyry Cu mineralisation, but not associated with known mining or exploration activity. Detailed analysis of each case study has been performed to promote these areas as potential targets and to demonstrate the ability of prospectivity modelling techniques as useful tools in mineral exploration programs.     

Using fuzzy logic in a Geographic Information System environment to enhance conceptually based prospectivity analysis of Mississippi Valley‐type mineralisation

Geographic Information Systems (GIS) provide an efficient vehicle for the generation of mineral prospectivity maps, which are products of the integration of large geological, geophysical and geochemical datasets that typify modern global‐scale mineral exploration. Conventionally, two contrasting approaches have been adopted, an empirical approach where there are numerous deposits of the type being sought in the analysed mature terrain, or a conceptual approach where there are insufficient known deposits for a statistically valid analysis. There are also a variety of potential methodologies for treatment of the data and their integration into a final prospectivity map. The Lennard Shelf represents the major Mississippi Valley‐type (MVT) province in Australia; however, there are only 13 deposits or major prospects known, making an empirical approach to prospectivity mapping impractical. Instead, a conceptual approach was adopted, where critical features that control the location of MVT deposits on the Lennard Shelf, as defined by widely accepted genetic models, were translated into features related to fluid pathways, depositional traps and fluid outflow zones, which can be mapped in a GIS and categorised as either regional or restricted diagnostic, or permissive criteria. All criteria were derived either directly from geological and structural data, or indirectly from geophysical and geochemical datasets. A fuzzy‐logic approach was adopted for the prospectivity analysis, where each interpreted critical feature of the conceptual model was assigned a weighting between 0 and 1 based on its inferred relative importance and reliability. The fuzzy‐logic method is able to cope with incomplete data, a common problem in regional‐scale exploration datasets. The data were best combined using the gamma operator to produce a fuzzy‐logic map for the prospectivity of MVT deposits on the southeastern Lennard Shelf. Five categories of prospectivity were defined. Importantly, from an exploration viewpoint, the two lowest prospectivity categories occupy ～90% and the highest two categories only 1.6% of the analysed area, yet eight of the 13 known MVT deposits lie in the latter and none in the former: i.e. all lie within ～10% of the area, despite the fact that deposit locations were not used directly in the analysis. The propectivity map also defines potentially mineralised areas in the central southeastern Lennard Shelf and the southern part of the Oscar Ranges, where there are currently no known deposits. Overall, the analysis demonstrates the power of fuzzy‐logic prospectivity mapping on a semi‐regional to regional scale, and emphasises the value of geological data, particularly accurate geological maps, in exploration for hydrothermal mineral deposits that formed late in the evolution of the terrain under exploration.     

Vectorial fuzzy logic: A novel technique for enhanced mineral prospectivity mapping,with reference to the orogenic gold mineralisation potential of the Kalgoorlie Terrane,Western Australia

Modern exploration is a multidisciplinary task requiring the simultaneous consideration of multiple disparate geological, geochemical and geophysical datasets. Over the past decade, several research groups have investigated the role of Geographic Information Systems as a tool to analyse these data. From this research, a number of techniques has been developed that allow the extraction of exploration‐relevant spatial factors from the datasets. The spatial factors are ultimately condensed into a single prospectivity map. Most techniques used to construct prospectivity maps tend to agree, in general, as to which areas have the lowest and highest prospectivities, but disagree for regions of intermediate prospectivity. In such areas, the prospectivity map requires detailed interpretation, and the end‐user must normally resort to analysis of the original datasets to determine which conjunction of factors results in each intermediate prospectivity value. To reduce this burden, a new technique, based on fuzzy logic principles, has been developed for the integration of spatial data. Called vectorial fuzzy logic, it differs from existing methods in that it displays prospectivity as a continuous surface and allows a measure of confidence to be incorporated. With this technique, two maps are produced: one displays the calculated prospectivity and the other shows the similarity of input values (or confidence). The two datasets can be viewed simultaneously as a three‐dimensional perspective image in which colour represents prospectivity and topography represents confidence. With the vectorial fuzzy logic method, factors such as null data and incomplete knowledge can also be incorporated into the prospectivity analysis.     

Incorporating conceptual and interpretation uncertainty to mineral prospectivity modelling

Prospectivity analyses are used to reduce the exploration search space for locating areas prospective for mineral deposits.The scale of a study and the type of mineral system associated with the deposit control the evidence layers used as proxies that represent critical ore genesis processes.In particular,knowledge-driven approaches(fuzzy logic)use a conceptual mineral systems model from which data proxies represent the critical components.These typically vary based on the scale of study and the type of mineral system being predicted.Prospectivity analyses utilising interpreted data to represent proxies for a mineral system model inherit the subjectivity of the interpretations and the uncertainties of the evidence layers used in the model.In the case study presented,the prospectivity for remobilised nickel sulphide(NiS)in the west Kimberley,Western Australia,is assessed with two novel techniques that objectively grade interpretations and accommodate alternative mineralisation scenarios.Exploration targets are then identified and supplied with a robustness assessment that reflects the variability of prospectivity value for each location when all models are considered.The first technique grades the strength of structural interpretations on an individual line-segment basis.Gradings are obtained from an objective measure of feature evidence,which is the quantification of specific patterns in geophysical data that are considered to reveal underlying structure.Individual structures are weighted in the prospectivity model with grading values correlated to their feature evidence.This technique allows interpreted features to contribute prospectivity proportional to their strength in feature evidence and indicates the level of associated stochastic uncertainty.The second technique aims to embrace the systemic uncertainty of modelling complex mineral systems.In this approach,multiple prospectivity maps are each generated with different combinations of confidence values applied to evidence layers to represent the diversity of processes potentially leading to ore deposition.With a suite of prospectivity maps,the most robust exploration targets are the locations with the highest prospectivity values showing the smallest range amongst the model suite.This new technique offers an approach that reveals to the modeller a range of alternative mineralisation scenarios while employing a sensible mineral systems model,robust modelling of prospectivity and significantly reducing the exploration search space for Ni.     

Three-dimensional mineral prospectivity modeling for targeting of concealed mineralization within the Zhonggu iron orefield,Ningwu Basin,China

The Zhonggu iron orefield is one of the most important iron orefields in China, and is located in the south of the Ningwu volcanic basin, within the middle and lower Yangtze metallogenic belt of eastern China. Here, we present the results of new 3D prospectivity modeling that enabled the delineation of areas prospective for exploration of concealed and deep-seated Baixiangshan-type mineralization and Yangzhuang-type mineralization within the Zhonggu orefield; both of these deposits are Kiruna-type Fe-apatite deposits but are hosted by different formations within the Ningwu Basin. The modeling approach used during this study involves 3 steps: (1) combining available geological and geophysical data to construct 3D geological models; (2) generation of 3D predictive maps from these 3D geological models using 3D spatial analysis and 3D geophysical methods; (3) combining all of the 3D predictive maps using logistic regression to create a prospectivity map. This approach integrates a large amount of available geoscientific data using 3D methods, including 3D geological modeling, 3D/2D geophysical methods, and 3D spatial analysis and data integration methods. The resulting prospectivity model clearly identifies highly prospective areas that not only include areas of known mineralization but also a number of favorable targets for future mineral exploration. The 3D prospectivity modeling approach showcased within this study provides an efficient way to identify camp-scale concealed and deep-seated exploration targets and can easily be adapted for regional- and deposit- scale targeting.     

Exploration targeting for orogenic gold deposits in the Granites-Tanami Orogen: Mineral system analysis,targeting model and prospectivity analysis

A major challenge for mineral exploration geologists is the development of a transparent and reproducible approach to targeting exploration efforts, particularly at the regional to camp scales, in terranes under difficult cover where exploration and opportunity costs are high. In this study, a three-pronged approach is used for identifying the most prospective ground for orogenic gold deposits in the Paleoproterozoic Granite-Tanami Orogen (GTO) in Western Australia.A key input to the analyses is the recent development of a 4D model of the GTO architectural evolution that provides new insights on the spatio-temporal controls over orogenic gold occurrences in the area; in particular, on the role of pre-mineralization (pre-1795 Ma) D_GTOE–D_GTO1–D_GTO2 architecture in localization of gold deposits and the spatial distribution of rock types in 3D. This information is used to build up a model of orogenic gold minerals system in the area, which is then integrated into the three mutually independent but complementary mineral prospectivity maps namely, a concept-driven “manual” and “fuzzy” analysis; and a data-driven “automated” analysis.The manual analysis involved: (1) generation of a process-based gold mineral systems template to aid target selection; (2) manual delineation of targets; (3) manual estimation of the probability of occurrence of each critical mineralization process based on the available information; and (4) combining the above probabilities to derive the relative probability of occurrence of orogenic gold deposits in each of the targets. The knowledge-based Geological Information System (GIS) analysis attempts to replicate the expert knowledge used in the manual approach, but queried in a more systematic format to eliminate human heuristic bias. This involves representing the critical mineralization processes in the form of spatial predictor maps and systematically querying them through the use of a fuzzy logic model to integrate the predictor maps and to derive the western GTO orogenic gold prospectivity map. The data-driven ‘empirical’ GIS analysis uses no expert knowledge. Instead it employs statistical measures to evaluate the spatial associations between known deposits and predictor maps to establish weights for each predictor layer then combines these layers into a predictive map using a Weights of Evidence (WofE) approach.Application of a mineral systems approach in the manual analysis and the fuzzy analysis is critical: potential high value targets identified by these approaches in the western GTO lie largely under cover, whereas traditional manual targeting is biased to areas of outcrop or sub-crop amenable to direct detection technology such as exploration geochemistry, and therefore towards areas that are data rich.The results show the power of combining the three approaches to prioritize areas for exploration. While the manual analysis identifies and employs human intuition and can see through incomplete datasets, it is difficult to filter out human bias and to systematically apply to a large region. The fuzzy method is more systematic, and highlights areas that the manual analysis has undervalued, but lacks the intuitive power of the human mind that refines the target by seeing through incomplete datasets. The empirical WoE method highlights correlations with favorable host stratigraphy and highlights the control of an early set of structures potentially undervalued in the knowledge driven approaches, yet is biased due to the incomplete nature of exploration datasets and lack of abundant gold deposits due to the extensive cover.The results indicate that the most prospective areas for orogenic gold in western GTO are located in the central part of the study area, largely in areas blind to previous exploration efforts. According to our study, the procedure to follow should be to undertake the analyses in the following order: manual prospectivity analysis, followed by the conceptual fuzzy approach, followed by the empirical GIS-based method. Undertaking the manual analysis first is important to prevent explorationists from being biased by the automated GIS-based outputs. It is however emphasized that all of the prospectivity outputs from these three methods are possible, and they should not be treated as ‘treasure maps’, but instead, as decision-support aids. Therefore, a final manual prospectivity analysis redefined by the mutual consideration of output from all of the methods is required.The strategy employed in this study constitutes a new template for best-practice in terrane- to camp-scale exploration targeting that can be applied to different terranes and deposit types, particularly in terranes under cover, and provides a step forward in managing uncertainty in the exploration targeting process.     

A new linguistic quantifier knowledge-guided OWA approach for mineral prospectivity mapping: a case study of the Bavanat Region,Iran

The main purpose of this study is to introduce a geographic information system (GIS)-based, multi-criteria decision analysis method for selection of favourable environments for Besshi-type volcanic-hosted massive sulphide (VHMS) deposits. The approach integrates two multi-criteria decision methods (analytical hierarchy process and ordered weighted averaging) and theory of fuzzy sets, within a GIS environment, to solve the problem of big suggested areas and missing known ore deposits in favourable environment maps for time and cost reduction. We doubled the fuzzy linguistic variables’ significance as a method to apply the arrange weights that the analytical hierarchy process (AHP)-ordered weighted averaging (OWA) hybrid procedure depends on. Another aim of this work is to assist mineral deposit exploration by modelling existing uncertainty in decision-making. Both AHP and fuzzy logic methods are knowledge-based, and they are affected by decision maker judgments. We used data-driven OWA approach in a hybrid method for solving this problem. We applied a new knowledge-guided OWA approach on data with changing linguistic variables according to the mineral system for VHMS deposits. Additionally, we used a vector-based method combination, which increased the precision of results. Results of knowledge-guided OWA showed that all of the mines and discovered deposits have been predicted with 100% accuracy in half of the size of the suggested area. To summarize, results improved the selection of possible target sites and increased the accuracy of results as well as reducing the time and cost, which will be used for field exploration. Finally, the hybrid methods with a knowledge-guided OWA approach have delivered more reliable results compared to exclusively knowledge-driven or data-driven methods. The study proved that expert knowledge and processed data (information) are critical important keys to exploration, and both of them should be applied in hybrid methods for reaching reliable results in mineral prospectivity mapping.     

Fuzzy inference systems for prospectivity modeling of mineral systems and a case-study for prospectivity mapping of surficial Uranium in Yeelirrie Area,Western Australia

A Mamdani-type fuzzy inference system for prospectivity modeling of mineral systems is described. The system is a type of knowledge-driven symbolic artificial intelligence that is transparent, intuitive and is easy to construct by geologists because they are built in natural language and use linguistic values. No examples are used for training the system and expert-opinions are incorporated indirectly in terms of objective mathematical functions, which reduce the possibility of over-emphasizing the known deposits usually used as training data. The cognitive reasoning of the exploration geologist is captured in explicit if–then type of statements written in natural language using linguistic values. Conditional dependencies in the exploration data sets are managed through the use of fuzzy operators. A case study for surficial uranium prospectivity modeling in the Yeelirrie area, Western Australia, is used to demonstrate the approach. In the output prospectivity map, the SE-NW trending Yeelirrie and E-W trending Hinkler's Well palaeochannels show high prospectivity, while other channels show very low prospectivity ranges. The known surficial uranium deposits fall in high prospectivity areas, although minor showings and anomalies in the southern part of the study area fall in low prospectivity areas. A comparison of the prospectivity model with the radiometric image shows that several channels showing high surface uranium concentrations in the NW and NE quadrants may not be prospective.     

三维成矿预测数据整合过程不确定性研究——以宁芜盆地钟姑矿田为例

基于多元地学大数据的三维成矿预测方法是开展深部找矿预测的新方法和新手段,也是当前成矿预测领域的研究热点之一。然而,大数据具有高维、混杂、非精确等特点,其分析处理过程面临多重不确定性。多元地学大数据整合是三维成矿预测的最终环节,其存在的不确定性将直接作用于预测结果,影响进一步的找矿应用和风险评估。本文以宁芜盆地钟姑矿田为例,从大数据思维出发,定量分析和度量预测要素和数学模型在数据整合过程中存在的不确定性及对三维成矿预测结果的影响。结果显示,断裂构造、背斜轴部等预测要素的不确定性对三维成矿预测结果的影响最为强烈;数据整合模型中,较之Logistic回归模型和证据权重模型,神经网络模型可能具有更高的不确定性程度。进一步工作可通过增强上述预测要素的可靠性和有效性、采用更多的数据整合模型进行更为全面的不确定性分析和评价,以获得更为可靠的三维成矿预测成果,从而降低成矿预测和找矿勘探风险。     

Chatham Rise nodular phosphate — Modelling the prospectivity of a lag deposit (off-shore New Zealand): A critical tool for use in resource development and deep sea mining

After almost five decades of episodic exploration, feasibility studies are now being completed to mine the deep-water nodular phosphate deposit on the central Chatham Rise. Weights of evidence (WofE) and fuzzy logic prospectivity models have been used in these studies to help in mapping of the exploration and resource potential, to constrain resource estimation, to aid with geotechnical engineering and mine planning studies and to provide background geological data for the environmental consent process. Prospectivity modelling was carried out in two stages using weights of evidence and fuzzy logic techniques. A WofE prospectivity model covering the area of best data coverage was initially developed to define the geological and environmental variables that control the distribution of phosphate on the Chatham Rise and map areas where mineralised nodules are most likely to be present. The post-probability results from this model, in conjunction with unique conditions and confidence maps, were used to guide environmental modelling for setting aside protected zones, and also to assist with mine planning and future exploration planning. A regional scale fuzzy logic model was developed guided by the results of the spatial analysis of the WofE model, elucidating where future exploration should be targeted to give the best chance of success in expanding the known resource. The development work to date on the Chatham Rise for nodular phosphate mineralisation is an innovative example of how spatial data modelling techniques can be used not only at the exploration stage, but also to constrain resource estimation and aid with environmental studies, thereby greatly reducing development costs, improving the economics of mine planning and reducing the environmental impact of the project.     

Artificial neural networks: A new method for mineral prospectivity mapping

A multilayer feed‐forward neural network, trained with a gradient descent, back‐propagation algorithm, is used to estimate the favourability for gold deposits using a raster GIS database for the Tenterfield 1:100 000 sheet area, New South Wales. The database consists of solid geology, regional faults, airborne magnetic and gamma‐ray survey data (U, Th, K and total count channels), and 63 deposit and occurrence locations. Input to the neural network consists of feature vectors formed by combining the values from co‐registered grid cells in each GIS thematic layer. The network was trained using binary target values to indicate the presence or absence of deposits. Although the neural network was trained as a binary classifier, output values for the trained network are in the range [0.1, 0.9] and are interpreted to indicate the degree of similarity of each input vector to a composite of all the deposit vectors used in training. These values are rescaled to produce a multiclass prospectivity map. To validate and assess the effectiveness of the neural‐network method, mineral‐prospectivity maps are also prepared using the empirical weights of evidence and the conceptual fuzzy‐logic methods. The neural‐network method produces a geologically plausible mineral‐prospectivity map similar, but superior, to the fuzzy logic and weights of evidence maps. The results of this study indicate that the use of neural networks for the integration of large multisource datasets used in regional mineral exploration, and for prediction of mineral prospectivity, offers several advantages over existing methods. These include the ability of neural networks to: (i) respond to critical combinations of parameters rather than increase the estimated prospectivity in response to each individual favourable parameter; (ii) combine datasets without the loss of information inherent in existing methods; and (iii) produce results that are relatively unaffected by redundant data, spurious data and data containing multiple populations. Statistical measures of map quality indicate that the neural‐network method performs as well as, or better than, existing methods while using approximately one‐third less data than the weights of evidence method.     

Fuzzy logic application in compiling multi geohazards macro-zone maps; case study: Rahdar, 1:25,000 Quadrangle,Khuzestan, Iran

This paper is devoted to describe a new method of fuzzy logic applied to multi geohazards macro-zone maps. The basic steps are (1) compilation of macro-zone maps for each type of geohazard phenomenon. Each phenomenon is then assigned one of seven geohazard zones: very low, low, relatively low, moderate, relatively high, high, and very high; (2) definition of a membership function using a fuzzy logic algorithm to quantify the qualitative data, estimate a geohazard grade for each mesh point, and to convert qualitative maps to quantitative maps; (3) computation of the summed hazard grade for each mesh point and creation a cumulative geohazard map; and (4) compilation of a multi geohazards macro-zone map by defining a mathematical algorithm and again using fuzzy logic. The paper also describes a mechanism that takes subjective engineering judgments into account. Finally, a geohazard map with a scale of 1:25,000 (Rahdar district, Khuzestan, Iran) is compiled. This study divides the area into seven geohazard macro-zones. Zones of high and very high geohazard classification cover most of the area due to the large number of sinkholes and asymmetric subsidences, rock falls and other slop movements. Low and very low hazard zones only cover small localities.     

成矿预测:从二维到三维

随着矿产资源勘探方法以及计算机科学技术的不断发展,成矿预测的理论和方法已从定性发展至定量,从二维拓展到三维。近十年来,随着深部矿产资源勘探工作的推进,三维成矿预测研究得到了迅猛发展,相关理论与方法也已逐步走向成熟。本文总结了国内外二维成矿预测研究的现状,同时对近十年来国内外学者在三维地质建模技术、三维成矿预测方法等方面的主要成果和进展做了系统总结和分析。目前,国内外多个地区已相继开展了三维成矿预测工作,并成功圈定多个深部找矿靶区,相关成果为深部找矿勘探工作提供了新的方法和方向。在此基础上,本文对未来三维成矿预测的发展趋势进行展望,相较于传统的二维成矿预测,三维成矿预测往往受限于三维预测信息的缺乏。如何更好的挖掘二维数据在深度方向的指示能力,将二维数据推演至三维环境,利用数值模拟、机器学习等方法开展数据挖掘、充分发挥已有数据的内蕴信息将在未来推动三维成矿预测理论的深入发展,提高三维成矿预测的理论方法及应用实践水平。     

Assessment of landslide susceptibility for a landslide-prone area (north of Yenice, NW Turkey) by fuzzy approach

. Regional landslide susceptibility assessments pose complex problems. To solve these problems, numerous approaches, such as statistical analysis, geotechnical engineering approach, geomorphologic approach and fuzzy logic, have been employed. However, all the available methods for regional landslide susceptibility assessments have some uncertainties due to a lack of knowledge and variability. Minimizing these uncertainties provides realistic approaches. Use of the fuzzy logic approach to produce a landslide susceptibility map of a landslide-prone area in NW Turkey is the main purpose of the present study. For this purpose, the study includes five main stages, these being the preparation of a landslide inventory of the study area, the application of factor analysis, the extraction of fuzzy if-then rules, the use of a geographical information system, and the control of the reliability of the resulting landslide susceptibility map. Slope angle, slope aspect, land use, weathering depth, water conditions and topographical elevation were considered as landslide conditioning factors for the study area. A total of 23 if-then rules was extracted from the field data. Employing these rules, fuzzified index maps representing each parameter were obtained. Finally, combining these maps, the landslide susceptibility map of the area was prepared. When compared with the landslide susceptibility map, the landslides identified in the area were found to be located in the very high- and high-susceptibility zones. As far as the performance of the fuzzy approach for processing is concerned, the images appear to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.     

Predictive mapping of prospectivity for orogenic gold,Giyani greenstone belt (South Africa)

We present a mineral systems approach to predictive mapping of orogenic gold prospectivity in the Giyani greenstone belt (GGB) by using layers of spatial evidence representing district-scale processes that are critical to orogenic gold mineralization, namely (a) source of metals/fluids, (b) active pathways, (c) drivers of fluid flow and (d) metal deposition. To demonstrate that the quality of a predictive map of mineral prospectivity is a function of the quality of the maps used as sources of spatial evidence, we created two sets of prospectivity maps — one using an old lithologic map and another using an updated lithological map as two separate sources of spatial evidence for source of metals/fluids, drivers of fluid flow and metal deposition. We also demonstrate the importance of using spatially-coherent (or geologically-consistent) deposit occurrences in data-driven predictive mapping of mineral prospectivity. The best predictive orogenic gold prospectivity map obtained in this study is the one that made use of spatial evidence from the updated lithological map and spatially-coherent orogenic gold occurrences. This map predicts 20% of the GGB to be prospective for orogenic gold, with 89% goodness-of-fit between spatially-coherent inactive orogenic gold mines and individual layers of spatial evidence and 89% prediction-rate against spatially-coherent orogenic gold prospects. In comparison, the predictive gold prospectivity map obtained by using spatial evidence from the old lithological map and all gold occurrences has 80% goodness-of-fit but only 63% prediction-rate. These results mean that the prospectivity map based on spatially-coherent gold occurrences and spatial evidence from the updated lithological map predicts exploration targets better (i.e., 28% smaller prospective areas with 9% stronger fit to training gold mines and 26% higher prediction-rate with respect to validation gold prospects) than the prospectivity map based on all known gold occurrences and spatial evidence from the old lithological map.     

Exploration feature selection applied to hybrid data integration modeling: Targeting copper-gold potential in central Iran

A Sugeno-type fuzzy inference system is implemented in the framework of an adaptive neural network to map Cu–Au prospectivity of the Urumieh–Dokhtar magmatic arc (UDMA) in central Iran. We use the hybrid “Adaptive Neuro Fuzzy Inference System” (ANFIS; Jang, 1993) algorithm to optimize the fuzzy membership values of input predictor maps and the parameters of the output consequent functions using the spatial distribution of known mineral deposits. Generic genetic models of porphyry copper–gold and iron oxide copper–gold (IOCG) deposits are used in conjunction with deposit models of the Dalli porphyry copper–gold deposit, Aftabru IOCG prospect and other less important Cu–Au deposits within the study area to identify recognition criteria for exploration targeting of Cu–Au deposits. The recognition criteria are represented in the form of GIS predictor layers (spatial proxies) by processing available exploration data sets, which include geology, stream sediment geochemistry, airborne magnetics and multi-spectral remote sensing data. An ANFIS is trained using 30% of the 61 known Cu–Au deposits, prospects and occurrences in the area. In a parallel analysis, an exclusively expert-knowledge-driven fuzzy model was implemented using the same input predictor maps. Although the neuro-fuzzy analysis maps the high potential areas slightly better than the fuzzy model, the well-known mineralized areas and several unknown potential areas are mapped by both models. In the fuzzy analysis, the moderate and high favorable areas cover about 16% of the study area, which predict 77% of the known copper–gold occurrences. By comparison, in the neuro-fuzzy approach the moderate and high favorable areas cover about 17% of the study area, which predict 82% of the copper–gold occurrences.     

Porphyry,epithermal, and orogenic gold prospectivity of Argentina

This paper presents a review of the available information on the significant porphyry, epithermal, and orogenic gold districts in Argentina, including the tectonic, geological, and structural settings of large deposits or deposits that have been exploited in the past. Based on this review of the geology and mineralization, targeting models are developed for epithermal and orogenic gold systems, in order to produce GIS-based prospectivity models. Using publically available digital geoscience data, weights of evidence and fuzzy logic prospectivity maps were generated for epithermal and orogenic gold mineralization in Argentina. The results of the prospectivity mapping highlight existing gold deposits within known mineralized districts throughout Argentina, as well as other highly prospective areas with no known deposits within these districts. Additionally, areas within Argentina that have no known gold mineralization (based on publically available information) were highlighted as being highly prospective based on the models used.     

Use of GIS-based fuzzy logic relations and its cross application to produce landslide susceptibility maps in three test areas in Malaysia

Landslides are one of the most frequent and common natural hazards in Malaysia. Preparation of landslide susceptibility maps is one of the first and most important steps in the landslide hazard mitigation. However, due to complex nature of landslides, producing a reliable susceptibility map is not easy. For this reason, a number of different approaches have been used, including direct and indirect heuristic approaches, deterministic, probabilistic, statistical, and data mining approaches. Moreover, these landslides can be systematically assessed and mapped through a traditional mapping framework using geoinformation technologies. Since the early 1990s, several mathematical models have been developed and applied to landslide hazard mapping using geographic information system (GIS). Among various approaches, fuzzy logic relation for mapping landslide susceptibility is one of the techniques that allows to describe the role of each predisposing factor (landslide-conditioning parameters) and their optimal combination. This paper presents a new attempt at landslide susceptibility mapping using fuzzy logic relations and their cross application of membership values to three study areas in Malaysia using a GIS. The possibility of capturing the judgment and the modeling of conditioning factors are the main advantages of using fuzzy logic. These models are capable to capture the conditioning factors directly affecting the landslides and also the inter-relationship among them. In the first stage of the study, a landslide inventory was complied for each of the three study areas using both field surveys and airphoto studies. Using total 12 topographic and lithological variables, landslide susceptibility models were developed using the fuzzy logic approach. Then the landslide inventory and the parameter maps were analyzed together using the fuzzy relations and the landslide susceptibility maps produced. Finally, the prediction performance of the susceptibility maps was checked by considering field-verified landslide locations in the studied areas. Further, the susceptibility maps were validated using the receiver-operating characteristics (ROC) success rate curves. The ROC curve technique is based on plotting model sensitivity—true positive fraction values calculated for different threshold values versus model specificity—true negative fraction values on a graph. The ROC curves were calculated for the landslide susceptibility maps obtained from the application and cross application of fuzzy logic relations. Qualitatively, the produced landslide susceptibility maps showed greater than 82% landslide susceptibility in all nine cases. The results indicated that, when compared with the landslide susceptibility maps, the landslides identified in the study areas were found to be located in the very high and high susceptibility zones. This shows that as far as the performance of the fuzzy logic relation approach is concerned, the results appeared to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.     

From 2D to 3D: Prospectivity modelling in the Taupo Volcanic Zone,New Zealand

A 2D prospectivity model of epithermal gold mineralisation has been completed over the Taupo Volcanic Zone (TVZ), using the weights of evidence modelling technique. This study was used to restrict a 3D geological interpretation and prospectivity model for the Ohakuri region. The TVZ is commonly thought of as a present-day analogue of the environment in which many epithermal ore deposits, such as in the Hauraki Goldfield, Coromandel Volcanic Zone, are formed. The models utilise compiled digital data including historical exploration data, geological data from the Institute of Geological and Nuclear Sciences Ltd. Quarter Million Mapping Programme, recent Glass Earth geophysics data and historic exploration geochemical data, including rock-chip and stream sediment information. Spatial correlations between known deposits and predictive maps are determined from the available data, which represent each component of the currently accepted mineral system model for epithermal gold. The 2D prospectivity model confirms that the TVZ has potential for gold mineralisation. However, one of the weaknesses of this weights of evidence model is that the studies are carried out in 2D, with an approximation of 3D provided by geophysical and drilling data projected to a 2D plane. Consequently, a 3D prospectivity model was completed over the Ohakuri area, constrained by the results of the 2D model and predictive maps. The 3D model improved the results allowing more effective exploration targeting. However, the study also highlighted the main issues that need to be resolved before 3D prospectivity modelling becomes standard practise in the mineral exploration industry. The study also helped develop a work flow that incorporates preliminary 2D spatial data analysis from the weights of evidence technique to more effectively restrict and develop 3D predictive map interpretation and development.