土壤-植被-大气系统水分散失机理的数值模拟

以Eeardorff(1978)提出的陆面参数化方案和Noilhan等人(1989)土壤水分参数化方案为基础,对陆面物理过程参数化方案进行了改进,在模式中较详细地考虑了植被和地面的各种物理参量如地面和叶面的反射率和发射率,净叶面面积指数,植被的物理阻抗等,并与大气边界层模式耦合。应用该模式模拟了沙漠及绿洲地区不同植被覆盖率情况下的蒸散量、土壤含水量和表面温度的日变化和连续变化特征;对不同植被覆盖率的热量平衡特征进行了比较。结果表明该模式较好地反映了地表蒸散3阶段的变化趋势特征,揭示出下垫面热量平衡分量间的相互转换过程。该模式可以用于中尺度的气象和区域气候模式,模拟和预测不同植被覆盖情况下近地层的热量输送和水分散失情况。     

Evaluation of a land-surface scheme at Cabauw

Summary We study the response of the land-surface to prescribed atmospheric forcing for 31 May 1978 at Cabauw, Netherlands, using the land-surface scheme from the Coupled Atmospheric boundary layer-Plant-Soil (CAPS) model. Results from model runs show realistic daytime surface fluxes are produced using a canopy conductance formulation derived from Cabauw data (for 1987, a different year), and un-tuned parameterizations of root density (near-uniform with depth) and soil heat flux (reduced thermal conductivity through vegetation). Sensitivity of model-calculated surface heat fluxes to initial values of soil moisture is also examined. Results of this study provide the land-surface base state for a coupled land–atmosphere modeling study.     

Large-Eddy Atmosphere–Land-Surface Modelling over Heterogeneous Surfaces: Model Development and Comparison with Measurements

A model is developed for the large-eddy simulation (LES) of heterogeneous atmosphere and land-surface processes. This couples a LES model with a land-surface scheme. New developments are made to the land-surface scheme to ensure the adequate representation of atmosphere–land-surface transfers on the large-eddy scale. These include, (1) a multi-layer canopy scheme; (2) a method for flux estimates consistent with the large-eddy subgrid closure; and (3) an appropriate soil-layer configuration. The model is then applied to a heterogeneous region with 60-m horizontal resolution and the results are compared with ground-based and airborne measurements. The simulated sensible and latent heat fluxes are found to agree well with the eddy-correlation measurements. Good agreement is also found in the modelled and observed net radiation, ground heat flux, soil temperature and moisture. Based on the model results, we study the patterns of the sensible and latent heat fluxes, how such patterns come into existence, and how large eddies propagate and destroy land-surface signals in the atmosphere. Near the surface, the flux and land-use patterns are found to be closely correlated. In the lower boundary layer, small eddies bearing land-surface signals organize and develop into larger eddies, which carry the signals to considerably higher levels. As a result, the instantaneous flux patterns appear to be unrelated to the land-use patterns, but on average, the correlation between them is significant and persistent up to about 650 m. For a given land-surface type, the scatter of the fluxes amounts to several hundred W $\text{ m }^{-2}$ , due to (1) large-eddy randomness; (2) rapid large-eddy and surface feedback; and (3) local advection related to surface heterogeneity.     

Numerical Simulation of Fluxes Generated by Inhomogeneities of the Underlying Surface over the Jinta Oasisin Northwestern China

Using land-use types derived from satellite remote sensing data collected by the EOS Moderate Resolution Imaging Spectroradiometer (EOS/MODIS), the mesoscale and turbulent fluxes generated by inhomogeneities of the underlying surface over the Jinta Oasis, northwestern China, were simulated using the Regional Atmospheric Modeling System (RAMS4.4). The results indicate that mesoscale circulation generated by land-surface inhomogeneities over the Jinta Oasis is more important than turbulence. Vertical heat fluxes and water vapor are transported to higher levels by mesoscale circulation. Mesoscale circulation also produces mesoscale synoptic systems and prevents water vapor over the oasis from running off. Mesoscale circulation transports moisture to higher atmospheric levels as the land-surface moisture over the oasis increases, favoring the formation of clouds, which sometimes leads to rainfall. Large-scale wind speed has a significant impact on mesoscale heat fluxes. During the active phase of mesoscale circulation, the stronger large-scale winds are associated with small mesoscale fluxes; however, background wind seems to intensify the turbulent sensible heat flux and turbulent latent heat flux. If the area of oasis is enlarged properly, mesoscale circulation will be able to transport moisture to higher levels, favoring the formation of rainfall in the oasis and protecting its "cold island" effect. The impact of irrigation on rainfall is important, and increasing irrigation across the oasis is necessary to protect the oasis.     

Improved Representation of Land-surface Heterogeneity in a Non-hydrostatic Numerical Weather Prediction Model

This study focuses on the relevance of accurate surface parameters, in particular soil moisture, and of parameterizations for heterogeneous land surfaces, for the prediction of sensible and latent heat fluxes by a mesoscale weather forecast model with horizontal grid resolution of 7 km. The analysis is based on model integrations for a 30-day period, which are compared both to flux measurements obtained from the LITFASS-2003 field experiment and to high-resolution-model (1-km grid spacing) results. At first, the relevance of improved parameter sets and input data compared to usual operational practice for an accurate prediction of near-surface fluxes is shown and discussed. It is demonstrated that an observation-based land-surface assimilation scheme leads to an improved soil moisture analysis, which is shown to be essential for the realistic simulation of surface fluxes. Secondly, the implementation of two efficient parameterization strategies for subgrid-scale variability of the surface, the mosaic and the tile approach, is presented. Using these methods, the simulations are in better agreement with measurements than simulations with simple aggregation methods that use effective surface parameters. Integrations with the mosaic approach reproduce high resolution simulations very well and more accurately than simulations with the tile method. Finally, the high resolution simulations are analyzed to justify and discuss the approximations underlying both methods.     

Sensitivity Analysis and Investigation of the Behaviour of the UTOPIA Land-Surface Process Model: A Case Study for Vineyards in Northern Italy

We used sensitivity-analysis techniques to investigate the behaviour of the land-surface model UTOPIA while simulating the micrometeorology of a typical northern Italy vineyard (Vitis vinifera L.) under average climatic conditions. Sensitivity-analysis experiments were performed by sampling the vegetation parameter hyperspace using the Morris method and quantifying the parameter relevance across a wide range of soil conditions. This method was used since it proved its suitability for models with high computational time or with a large number of parameters, in a variety of studies performed on different types of biophysical models. The impact of input variability was estimated on reference model variables selected among energy (e.g. net radiation, sensible and latent heat fluxes) and hydrological (e.g. soil moisture, surface runoff, drainage) budget components. Maximum vegetation cover and maximum leaf area index were ranked as the most relevant parameters, with sensitivity indices exceeding the remaining parameters by about one order of magnitude. Soil variability had a high impact on the relevance of most of the vegetation parameters: coefficients of variation calculated on the sensitivity indices estimated for the different soils often exceeded 100 %. The only exceptions were represented by maximum vegetation cover and maximum leaf area index, which showed a low variability in sensitivity indices while changing soil type, and confirmed their key role in affecting model results.     

基于CLM4.5的高寒草地辐射收支和水热交换的数值模拟研究

利用那曲高寒气候环境观测研究站本部BJ观测点2014年6-8月的近地层观测资料,结合CLM4.5陆面模型,探究空气动力学粗糙长度、叶面积指数、植被覆盖度和热力学粗糙长度参数化方案的改变对陆面能水平衡的模拟结果产生的影响,并且探讨了粗糙度及植被状态指数影响陆面能水平衡模拟性能的机制.结果表明:(1)CLM4.5默认的热力...     

Evaluation of a Photosynthesis-Based Canopy Resistance Formulation in the Noah Land-Surface Model

Accurately representing complex land-surface processes balancing complexity and realism remains one challenge that the weather modelling community is facing nowadays. In this study, a photosynthesis-based Gas-exchange Evapotranspiration Model (GEM) is integrated into the Noah land-surface model replacing the traditional Jarvis scheme for estimating the canopy resistance and transpiration. Using 18-month simulations from the High Resolution Land Data Assimilation System (HRLDAS), the impact of the photosynthesis-based approach on the simulated canopy resistance, surface heat fluxes, soil moisture, and soil temperature over different vegetation types is evaluated using data from the Atmospheric Radiation Measurement (ARM) site, Oklahoma Mesonet, 2002 International H₂O Project (IHOP_2002), and three Ameriflux sites. Incorporation of GEM into Noah improves the surface energy fluxes as well as the associated diurnal cycle of soil moisture and soil temperature during both wet and dry periods. An analysis of midday, average canopy resistance shows similar day-to-day trends in the model fields as seen in observed patterns. Bias and standard deviation analyses for soil temperature and surface fluxes show that GEM responds somewhat better than the Jarvis scheme, mainly because the Jarvis approach relies on a parametrised minimum canopy resistance and meteorological variables such as air temperature and incident radiation. The analyses suggest that adding a photosynthesis-based transpiration scheme such as GEM improves the ability of the land-data assimilation system to simulate evaporation and transpiration under a range of soil and vegetation conditions.     

The Simulation of the Opposing Fluxes of Latent Heat and CO<Subscript>2</Subscript> over Various Land-Use Types: Coupling a Gas Exchange Model to a Mesoscale Atmospheric Model

A mesoscale meteorological model (FOOT3DK) is coupled with a gas exchange model to simulate surface fluxes of CO₂ and H₂O under field conditions. The gas exchange model consists of a C3 single leaf photosynthesis sub-model and an extended big leaf (sun/shade) sub-model that divides the canopy into sunlit and shaded fractions. Simulated CO₂ fluxes of the stand-alone version of the gas exchange model correspond well to eddy-covariance measurements at a test site in a rural area in the west of Germany. The coupled FOOT3DK/gas exchange model is validated for the diurnal cycle at singular grid points, and delivers realistic fluxes with respect to their order of magnitude and to the general daily course. Compared to the Jarvis-based big leaf scheme, simulations of latent heat fluxes with a photosynthesis-based scheme for stomatal conductance are more realistic. As expected, flux averages are strongly influenced by the underlying land cover. While the simulated net ecosystem exchange is highly correlated with leaf area index, this correlation is much weaker for the latent heat flux. Photosynthetic CO₂ uptake is associated with transpirational water loss via the stomata, and the resulting opposing surface fluxes of CO₂ and H₂O are reproduced with the model approach. Over vegetated surfaces it is shown that the coupling of a photosynthesis-based gas exchange model with the land-surface scheme of a mesoscale model results in more realistic simulated latent heat fluxes.     

A regional climate model simulation over West Africa: parameterization tests and analysis of land-surface fields

The West African Monsoon has been simulated with the regional climate model PROMES, coupled to the land-surface model ORCHIDEE and nested in ECMWF analysis, within AMMA-EU project. Three different runs are presented to address the influence of changes in two parameterizations (moist convection and radiation) on the simulated West African Monsoon. Another aim of the study is to get an insight into the relationship of simulated precipitation and 2-m temperature with land-surface fluxes. To this effect, data from the AMMA land-surface model intercomparison project (ALMIP) have been used. In ALMIP, offline simulations have been made using the same land-surface model than in the coupled simulation presented here, which makes ALMIP data particularly relevant for the present study, as it enables us to analyse the simulated soil and land-surface fields. The simulation of the monsoon depends clearly on the two analysed parameterizations. The inclusion of shallow convection parametrization affects the intensity of the simulated monsoon precipitation and modifies some dynamical aspects of the monsoon. The use of a fractional cloud-cover parameterization and a more complex radiation scheme is important for better reproducing the amplitude of the latitudinal displacement of the precipitation band. This is associated to an improved simulation of the surface temperature field and the easterly jets. However, the parameterization changes do not affect the timing of the main rainy and break periods of the monsoon. A better representation of downward solar radiation is associated with a smaller bias in the surface heat fluxes. The comparison with ALMIP land-surface and soil fields shows that precipitation and temperature biases in the regional climate model simulation are associated to certain biases in land-surface fluxes. The biases in soil moisture seem to be driven by atmospheric biases as they are strongly affected by the parameterization changes in atmospheric processes.     

Sensitivity study and validation of a land surface parameterization using the HAPEX-MOBILHY data set

A simple parameterization of land surface processes, amenable to the structure of a two-layer soil model, including a representation of the vegetation, has been designed for use in meteorological models. Prior to implementation in a mesoscale model, it is necessary to check the components and to verify the good working order of the parameterization as a whole. The aims of this paper then are: (i) evaluation and a sensitivity study of the various components of the model, specifying the needed accuracy for the parameters; (ii) micrometeorological validation of the model against the HAPEX-MOBILHY data set.First, we present the basic scheme. The focus is on the parameterization of surface resistance, and especially on its relationship with soil moisture.A sensitivity study is then performed through a set of one-dimensional simulations which allow a full interaction between the ground and the atmosphere. Above bare ground, it is shown that both soil texture and initial moisture greatly influence the outcome of the simulation. Latent heat flux ranges from that associated with potential evaporation through a switch-like behavior to that of dry soil. Next, the effects of transpiring vegetation canopies on the physical processes involved and the surface energy balance are examined. The sensitivity of the latent heat flux to changes in the soil and canopy parameters is emphazised; the major influence of the initial mean soil moisture and of the vegetation cover is pointed out. Finally, the evolution of the boundary layer in response to various surface conditions is studied.A validation of the land surface scheme is conducted through daily cycles during cloudless days. Simulated turbulent fluxes are successfully compared to micrometeorological measurements over a maize field at different growth stages. Over a pine forest, the correct simulation of the turbulent fluxes is obtained with an adequate parameterization of the surface resistance accounting for the atmospheric moisture deficit.     

西北干旱区荒漠戈壁陆面过程的数值模拟

首先利用“中国西北干旱区陆 气相互作用试验”2 0 0 0年 5～ 6月在甘肃敦煌进行的陆 气相互作用野外试验的观测资料 ,确定了西北干旱区荒漠戈壁的陆面过程参数 ,并用这些参数改进了已有的陆面过程模式。然后用该陆面过程模式对敦煌陆 气相互作用野外试验荒漠戈壁上的大气感热通量、潜热通量、摩擦速度以及净辐射、地表和土壤温度、土壤水份等重要陆面变量进行了模拟 ,结果表明 ,模拟值与观测值非常接近 ,这说明改进后的模式对干旱区陆面过程有较强的模拟能力     

Simulation of surface energy fluxes using high-resolution non-hydrostatic simulations and comparisons with measurements for the LITFASS-2003 experiment

Land-surface heterogeneity effects on the subgrid scale of regional climate and numerical weather prediction models are of vital interest for the energy and mass exchange between the surface and the atmospheric boundary layer. High-resolution numerical model simulations can be used to quantify these effects, and are a tool used to obtain area-averaged surface fluxes over heterogeneous land surfaces. We present high-resolution model simulations for the LITFASS area near Berlin during the LITFASS-2003 experiment, which were carried out using the non-hydrostatic model FOOT3DK of the University of Köln with horizontal resolutions of 1 km and 250 m. The LITFASS-2003 experimental dataset is used for comparison. The screen level quantities show good quality for the simulated pressure, temperature, humidity and wind speed and direction. Averaged over the four week experimental period, simulated surface energy fluxes at land stations show a small bias for the turbulent heat fluxes and an underestimation of the net radiation caused by excessive cloudiness in the simulations. For eight selected days with low cloud amounts, the net radiation bias is close to zero, but the sensible heat flux shows a strong positive bias. Large differences are found for latent heat fluxes over a lake, which are partly due to local effects on the measurements, but an additional problem seems to be the overestimation of the turbulent exchange under stable conditions in the daytime internal boundary layer over the lake. In the area average over the LITFASS area of 20 ×  20 km², again a strong positive bias of 70 W m^?2 for the sensible heat is present. For the low soil moisture conditions during June 2003, the simulation of the turbulent heat fluxes is sensitive to variations in the soil type and its hydrological properties. Under these conditions, the supply of ground water to the lowest soil layer should be accounted for. Different area-averaging methods are tested. The experimental set-up of the LITFASS-2003 experiment is found to be well suited for the computation of area-averaged turbulent heat fluxes.     

Effects of Crop Growth and Development on Land Surface Fluxes

In this study, the Crop Estimation through Resource and Environment Synthesis model (CERES3.0) was coupled into the Biosphere-Atmosphere Transfer Scheme (BATS), which is called BATS CERES, to represent interactions between the land surface and crop growth processes. The effects of crop growth and development on land surface processes were then studied based on numerical simulations using the land surface models. Six sensitivity experiments by BATS show that the land surface fluxes underwent substantial changes when the leaf area index was changed from 0 to 6 m2 m-2. Numerical experiments for Yucheng and Taoyuan stations reveal that the coupled model could capture not only the responses of crop growth and development to environmental conditions, but also the feedbacks to land surface processes. For quantitative evaluation of the effects of crop growth and development on surface fluxes in China, two numerical experiments were conducted over continental China: one by BATS CERES and one by the original BATS. Comparison of the two runs shows decreases of leaf area index and fractional vegetation cover when incorporating dynamic crops in land surface simulation, which lead to less canopy interception, vegetation transpiration, total evapotranspiration, top soil moisture, and more soil evaporation, surface runoff, and root zone soil moisture. These changes are accompanied by decreasing latent heat flux and increasing sensible heat flux in the cropland region. In addition, the comparison between the simulations and observations proved that incorporating the crop growth and development process into the land surface model could reduce the systematic biases of the simulated leaf area index and top soil moisture, hence improve the simulation of land surface fluxes.     

Evaluating Common Land Model Energy Fluxes Using FLUXNET Data

Given the crucial role of land surface processes in global and regional climates, there is a pressing need to test and verify the performance of land surface models via comparisons to observations. In this study, the eddy covariance measurements from 20 FLUXNET sites spanning more than 100 site-years were utilized to evaluate the performance of the Common Land Model(Co LM) over different vegetation types in various climate zones. A decomposition method was employed to separate both the observed and simulated energy fluxes, i.e., the sensible heat flux, latent heat flux, net radiation, and ground heat flux, at three timescales ranging from stepwise(30 min) to monthly. A comparison between the simulations and observations indicated that Co LM produced satisfactory simulations of all four energy fluxes, although the different indexes did not exhibit consistent results among the different fluxes. A strong agreement between the simulations and observations was found for the seasonal cycles at the 20 sites, whereas Co LM underestimated the latent heat flux at the sites with distinct dry and wet seasons, which might be associated with its weakness in simulating soil water during the dry season. Co LM cannot explicitly simulate the midday depression of leaf gas exchange, which may explain why Co LM also has a maximum diurnal bias at noon in the summer. Of the eight selected vegetation types analyzed, Co LM performs best for evergreen broadleaf forests and worst for croplands and wetlands.     

Validation of the “Lokal-Modell” over heterogeneous land surfaces using aircraft-based measurements of the REEEFA experiment and comparison with micro-scale simulations

Summary An aircraft-based experimental investigation of the atmospheric boundary layer (ABL) structure and of the energy exchange processes over heterogeneous land surfaces is presented. The measurements are used for the validation of the mesoscale atmospheric model “Lokal-Modell” (LM) of the German Weather Service with 2.8 km resolution. In addition, high-resolution simulations using the non-hydrostatic model FOOT3DK with 250 m resolution are performed in order to resolve detailed surface heterogeneities. Two special observation periods in May 1999 show comparable convective boundary layer (CBL) conditions. For one case study vertical profiles and area averages of meteorological quantities and energy fluxes are investigated in detail. The measured net radiation is highly dependent on surface albedo, and the latent heat flux exhibits a strong temporal variability in the investigation area. A reduction of this variability is possible by aggregation of multiple flight patterns. To calculate surface fluxes from aircraft measurements at low altitude, turbulent energy fluxes were extrapolated to the ground by the budget method, which turned out to be well applicable for the sensible heat flux, but not for the latent flux. The development of the ABL is well captured by the LM simulation. The comparison of spatiotemporal averages shows an underestimation of the observed net radiation, which is mainly caused by thin low-level clouds in the LM compared to observed scattered CBL clouds. The sensible heat flux is reproduced very well, while the latent flux is highly overestimated especially above forests. The realistic representation of surface heterogeneities in the investigation area in the FOOT3DK simulations leads to improvements for the energy fluxes, but an overestimation of the latent heat flux still persists. A study of upscaling effects yields more structures than the LM fields when averaged to the same scale, which are partly caused by the non-linear effects of parameter aggregation on the LM scale.     

Modeling water and heat balance components for the river basin using remote sensing data on underlying surface characteristics

The method of the AVHRR-3 (NOAA) radiometer measurement data subject processing is produced for the retrieval of underlying surface temperature and several vegetation characteristics under cloud-free conditions. A technology for deriving the values of these parameters from the MODIS (EOS/Terra and Aqua) radiometer data is developed. The estimation of the temperature and vegetation characteristics is carried out for the Seim River basin (Kursk region) with the catchment area of 7460 km² for 2003–2005 vegetation seasons. Practical coincidence of estimations of AVHRR- and MODIS-derived temperatures, as well as the coincidence with ground observation results, is revealed. Statistics of these estimation errors is analyzed. Satellite-derived estimations of land surface temperature (LST) and vegetation characteristics are used for the calibration and verification of the developed model of the vertical heat and water transfer in the soil-vegetation-atmosphere system (SVAT). The model is intended for calculations of evapotranspiration, soil water and heat content, latent and sensible heat fluxes, and other water and heat balance components. The abilities to compute these parameters using the satellite estimations of the leaf area index and projective vegetation cover fraction as the model parameters and LST satellite estimations as the model input variable are investigated.     

Numerical Modelling of the Effects of Vegetation and Environmental Conditions on the Lake Breeze

The influence of vegetation and environmental conditions on the lake breeze and associated boundary-layer turbulence structure has been studied using a two-dimensional nonhydrostatic, compressible mesoscale model coupled with the SiB2 land-surface scheme. The results show that the impacts of vegetation on the lake effects are dependent on the environmental conditions, such as soil wetness and background wind, as well as vegetation characteristics. Both soil wetness and background wind play important roles in modifying lake effects on boundary-layer turbulence and the lake breeze, while the effects of vegetation type are secondary compared to the other factors. Without background wind, and under the same soil wetness, the maximum horizontal windspeed of the lake breeze is insensitive to the type of vegetation. Soil wetness can greatly affect both the maximum horizontal windspeed and the maximum vertical velocities of the lake breeze. With background wind, the lake-breeze circulations, upward motion regions, and boundary-layer turbulence structure all change markedly. A weaker background wind can strengthen the lake breeze, while stronger background wind suppresses the lake breeze circulations. The distribution of sensible and latent heat fluxes is also very sensitive to the soil wetness and background wind. However, for the same soil wetness (0.25 and 0.4 were chosen), there is only a small difference in the distribution of sensible and latent heat fluxes between the bare soil and vegetated soil or between the types of vegetated soils.