华北克拉通基底花岗质片麻岩变形和流变学研究——以辽西寺儿堡地区为例

辽西寺儿堡镇新太古代花岗质片麻岩内发育的宏观、微观构造变形特征表明该地区曾遭受了强烈的韧性变形改造。花岗质岩石变形程度在初糜棱岩–糜棱岩之间,岩石经历了SWW向左行剪切作用改造。岩石中石英有限应变测量判别结果表明,构造岩类型为L-S型,为平面应变。岩石的剪应变平均值为1.43,运动学涡度值为0.788~0.829,指示岩石形成于以简单剪切为主的一般剪切变形中。此外,石英颗粒以亚颗粒旋转重结晶和颗粒边界迁移重结晶作用为主,长石颗粒塑性拉长,部分发生膨凸式重结晶作用;石英组构特征(EBSD)揭示石英以中–高温柱面滑移为主;石英颗粒边界具有明显的分形特征,分形维数值为1.151~1.201,指示了中高温变形条件。综合石英、长石的变形行为、石英组构特征以及分形法Kruhl温度计的判别结果,推断辽西寺儿堡镇新太古代花岗质片麻岩经历过480~600℃的中高温变形,其同构造变质相为高绿片岩相-低角闪岩相。花岗质岩石的古差异应力为10.62~12.21 MPa,估算的应变速率为10~(–11.67)~10~(–13.34) s~(–1),即缓慢的变形,可能记录早期中高温、低应变速率的韧性变形过程,反映华北克拉通基底中下部地壳变形特征。     

Geology and Hydrothermal Alteration of the Duobuza Gold‐Rich Porphyry Copper District in the Bangongco Metallogenetic Belt,Northwestern Tibet

The Duobuza gold‐rich porphyry copper district is located in the Bangongco metallogenetic belt in the Bangongco‐Nujiang suture zone south of the Qiangtang terrane. Two main gold‐rich porphyry copper deposits (Duobuza and Bolong) and an occurrence (135 Line) were discovered in the district. The porphyry‐type mineralization is associated with three Early Cretaceous ore‐bearing granodiorite porphyries at Duobuza, 135 Line and Bolong, and is hosted by volcanic and sedimentary rocks of the Middle Jurassic Yanshiping Formation and intermediate‐acidic volcanic rocks of the Early Cretaceous Meiriqie Group. Simultaneous emplacement and isometric distribution of three ore‐forming porphyries is explained as multi‐centered mineralization generated from the same magma chamber. Intense hydrothermal alteration occurs in the porphyries and at the contact zone with wall rocks. Four main hypogene alteration zones are distinguished at Duobuza. Early‐stage alteration is dominated by potassic alteration with extensive secondary biotite, K‐feldspar and magnetite. The alteration zone includes dense magnetite and quartz‐magnetite veinlets, in which Cu‐Fe‐bearing sulfides are present. Propylitic alteration occurs in the host basic volcanic rocks. Extensive chloritization‐silicification with quartz‐chalcopyrite or quartz‐molybdenite veinlets superimposes on the potassic alteration. Final‐stage argillic alteration overlaps on all the earlier alteration. This alteration stage is characterized by destruction of feldspar to form illite, dickite and kaolinite, with accompanying veinlets of quartz + chalcopyrite + pyrite and quartz + pyrite assemblages. Cu coexists with Au, which indicates their simultaneous precipitation. Mass balance calculations show that ore‐forming elements are strongly enriched during the above‐mentioned three alteration stages.     

长乐-南澳断裂带晚中生代岩浆活动 与变质-变形关系

长乐-南澳断裂带是东南沿海地区陆内强烈变质-变形带。带内沉积岩、火山岩和早白垩世的钙碱性角闪石黑云花岗岩和花岗闪长岩都已发生可达角闪岩相的变质和石英-长石相韧性剪切变形。鉴于高温矿物和强烈韧性变形多出现在深成岩附近;远离深成岩,变质和变形就逐渐减弱,故本文认为,至少有一部分变质变形的热源是由岩浆提供的。韧剪组构和糜棱质花岗岩是在岩浆侵位的晚期或长乐-南澳断裂带左旋走滑时,在中地壳部位同时形成的,长乐断裂带中花岗岩的组构记录了一期同走滑变形的岩浆作用,“软变形”作用。据此,长乐-南澳带内花岗岩的形成是受走滑剪切应力和岩浆热双重制约的,是在走滑过程中实现的。其动力来源可能与晚中生代的太平洋板块沿日本中央构造线—台湾纵谷带朝东亚陆缘的斜向俯冲有关。     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

文象花岗岩的成分、结构和成因机制

文象花岗岩具有特殊文象结构,研究其三维拓扑结构和形成过程有助于了解花岗质岩石的结晶作用.以北京周口店房山岩体和湖北罗田蕙兰山的文象花岗岩为研究对象,综合利用光学显微镜、扫描电镜、电子探针和电子背散射衍射等技术方法,对岩石矿物组成、结晶学取向和拓扑结构进行了系统研究.结果表明:(1) 文象花岗岩的矿物组成与其形成地质环境有关,石英和长石的含量变化范围很大,其中石英含量通常在20%~45%,但是相同地区同期形成的文象花岗岩具有相对稳定的矿物组成;(2) 长石作为寄主矿物通常呈半自形－自形粗大晶体,可以是碱性长石或斜长石,其端元组分以钾长石和钠长石为主,低温下常分解为条纹长石;(3) 石英在长石寄主矿物中规则穿插生长,在三维空间通常呈近似平行板状、长条状/柱状或非连通枝杈状,并只在特定岩石断面形似象形文字;(4) 正交偏光显微镜下,石英可以具有多种消光位,但是通常在一定范围内同时消光;(5) 石英普遍发育道芬双晶,偶见日本双晶;(6) 条纹长石中钾长石与钠长石对应(100)、(010)、(001) 面和[001]轴近似平行;(7) 多数石英颗粒与寄主长石之间具有密切结晶学取向关系,即石英[1123]轴近似平行长石c[001]轴.该研究证实文象花岗岩是石英和长石同时生长的结果,而长石作为寄主矿物影响并控制着石英的成核与生长方向.      

S–C fabrics developed in cataclastic rocks from the Nojima fault zone,Japan and their implications for tectonic history

S–C fabrics similar to those found in mylonites are observed in foliated cataclastic granitic rocks from the Nojima fault zone, southwest Japan. The foliated cataclastic rocks comprise cataclasite, fault breccia, gouge, and crushing-originated pseudotachylyte. The S–C fabrics observed in these cataclastic rocks involve S-surfaces defined by shape preferred orientation of biotite fragments or aggregates of quartz and feldspar fragments, and C-and C′-surfaces defined by microshears and shear bands, respectively, where fine-grained material is concentrated. Striations on the main fault plane are oriented parallel to the cataclasite lineations. A significant microstructural difference between the foliated cataclastic rocks and S–C mylonites is the absence of dynamically recrystallized grains in the foliated cataclasites. The striations, cataclastic lineations, and the S–C fabrics in the cataclastic rocks formed from the late Tertiary to the late Holocene indicate that the Nojima fault zone has moved as a dextral strike-slip fault, with a minor reverse component since it formed. S–C fabrics in cataclastic rocks provide important information on the tectonic history and are reliable kinematic indicators of the shear sense in brittle shear zones or faults.     

Alteration and mass transfer in cataclasites and mylonites in 6.6 km of granitic crust at the Siljan impact structure,central Sweden

Granitic rocks deformed by cataclasis and mylonitization on macro- (a few meters) and micro- (thin section) scales are found at depths down to 6.6km in the Siljan impact structure in central Sweden. Granites near fault planes exhibit: (1) fracturing, kinking, fragmentation, and recrystallization of feldspars into pure K and Na endmember varieties, (2) fragmentation, polygonization and development of undulose extinction in quartz, and (3) kinking, appearance of wavy extinction and alteration of biotite, chlorite, amphibole, and alteration of ilmenite and magnetite. Whole-rock chemical analyses of deformed and undeformed rocks show that deformed rocks are enriched in SiO₂ (by about 5 wt.%) and depleted in other oxides by variable percentages. Apart from Rb and Co, the concentrations of other trace elements (including Ba, Sr, Zn, Zr, Pb, Cd, Cu, Cr, Ni, V, U, Th, La, and Li) are lower in deformed relative to undeformed rocks. Mass-balance calculations for a 1000 cm³ model granite which were based on modal mineralogy, whole-rock chemistry, and mineral analyses suggest that the break down of primary biotite, chlorite, and amphibole in deformed zones released elements to circulating fluids. These calculations also indicate liberation of water and a doubling of porosity (from 1 to 2%) during the deformation episodes. Later precipitation of minerals in shear and tension fractures reduced this porosity. Within the upper 2000 m of the Gravberg-1 well, the formation of fracture-filling minerals (smectite, calcite, hematite, chlorite, and albite) is impact-related, and was favored by active circulation of meteoric water. Fracture-filling minerals in the upper 2000 m of the borehole formed at temperatures of 70° to 200°C. Between depths of 2000 and 3500 m, fracture-filling mineral assemblages (dominated by Fe–Mg chlorite, sphene and epidote) suggest formation temperatures in the range of 150° to 300°C. Occurrence of pumpellyite and prehnite in some altered biotite and chlorite of the deformed zones between 3500 and 5500 m suggest preimpact metamorphism and formation temperature above 150°C. Below 5500 m, the mineral assemblages in the fractures are dominated by quartz, sphene, epidote, and some muscovite and chlorite, indicating a temperature range between 300° and 450°C. One of the possible origins for the CH₄ and H₂ gases detected in the Gravberg-1 well is a combination of hydrogen ions released by decomposition of hydrated silicates (biotite, chlorite, hornblende) with carbon. The presence of iron in the deformed granitic rocks prevented the resulting CH₄ from being oxidized.     

Deformation conditions, kinematics, and displacement history of shallow crustal ductile shearing in the Norumbega fault system in the Northern Appalachians, eastern Maine

The Norumbega fault system in the Northern Appalachians in eastern Maine experienced complex post-Acadian ductile and brittle deformation from middle through late Paleozoic times. Well-preserved epizonal ductile shear zones in Fredericton belt metasedimentary rocks and granitic batholiths that intrude them provide valuable information on the nature, geometry, and evolution of orogen-parallel strike-slip Norumbega faulting. Metasedimentary rocks were ductilely sheared into phyllonite schistose mylonite, whereas granite into mylonite within the ductile shear zones. Ductile shearing took place at conditions of the lower greenschist facies with peak temperatures on the order of 300–350° based on comparison of plastic quartz and brittle feldspar microstructures, confirming a shallow crustal environment during faulting.Ductile shear strain was partitioned into two major shear zones in easternmost Maine—the Waite and Kellyland zones—but these zones converge toward the southwest. Megascopic, mesoscopic, and microscopic kinematic indicators confirm that fault motion in both zones was dominantly dextral strike-slip. Detailed mapping, especially in the plutonic rocks, reveals a complex ductile deformation history in the area where the Waite and Kellyland zones converge. Shear strain is broadly distributed in the rocks between Kellyland and Waite zones, and increases toward their junction. Multiple dextral high-strain zones oblique to both zones resemble megascopic synthetic c′ shear bands. Together with the Kellyland and Waite master shear zones, these define a megascopic S–C′ structure system produced in a regional-scale dextral strike-slip shear duplex that developed in the transition zone between the deeper (south-central Maine) and shallower (eastern Maine) segments of the Norumbega fault system.Granite plutons caught within the strike-slip shear duplex were intensely sheared and progressively smeared into long and narrow slivers identified by this study. The western lobe of the Deblois pluton and the Lucerne pluton have been recognized as the sources, respectively of the Third Lake Ridge and Morrison Ridge granite slivers. Restoration of both granite slivers to their presumed original positions yields approximately 25 km of dextral strike-slip displacement along only the Kellyland and synthetic ductile shear zones.     

Grain-size reduction of feldspars by fracturing and neocrystallization in a low-grade granitic mylonite and its rheological effect

Feldspar grain-size reduction occurred due to the fracturing of plagioclase and K-feldspar, myrmekite formation and neocrystallization of albitic plagioclase along shear fractures of K-feldspar porphyroclasts in the leucocratic granitic rocks from the Yecheon shear zone of South Korea that was deformed under a middle greenschist-facies condition. The neocrystallization of albitic plagioclase was induced by strain energy adjacent to the shear fractures and by chemical free energy due to the compositional disequilibrium between infiltrating Na-rich fluid and host K-feldspar. With increasing deformation from protomylonite to mylonite, alternating layers of feldspar, quartz and muscovite developed. The fine-grained feldspar-rich layers were deformed dominantly by granular flow, while quartz ribbons were deformed by dislocation creep. With layer development and a more distributed strain in the mylonite, lower stresses in the quartz-rich layers resulted in a larger size of dynamically recrystallized quartz grains than that of the protomylonite.     

天山东段推覆构造研究

本文概括性总结了天山东段大型推覆构造的基本特征。根据地质证据和同位素年龄,东天山存在早古生代末,晚古生代晚期和新生代三期推覆构造;根据推覆构造分布规律及构造背景,在平面上划分为五大推覆带、9个大型韧剪带;根据出露岩石的矿物变形相将东天山推覆构造划分为深、中深和浅三个深度层次;通过韧剪变形组构的观察分析,确定了多期韧性变形性质与运动方向。糜棱岩中超微构造、古应力及小构造变形缩短率测量统计,证明东天山推覆变形具有显著的地壳缩短增厚作用。新生代板块碰撞导致本区中新生代盆地基底向造山带A型俯冲,造山带向盆地推覆,其结果就构成了今日看到的镶嵌状盆地-山脉构造地貌景观。     

云南腾冲地热区主要蚀变矿物含量与蚀变母岩的关系

腾冲地热区出露有众多热泉泉群,地热活动频繁,岩石发生强烈蚀变,形成的主要蚀变矿物包括高岭石、绢云母、蒙脱石、I/M间层矿物、石英和蛋白石。主要蚀变矿物的种类和含量受蚀变母岩性质的控制,花岗质砂砾岩和花岗岩形成高岭石,玄武岩形成伊利石和蒙托石,安山岩中发育硅化作用。泥化作用增强的趋势是安山岩→花岗岩→玄武岩→花岗质砂砾岩。由于花岗质砂砾岩在热区内广泛分布,通过蚀变作用形成了有经济价值的高岭土矿床。     

Development of quartz ribbons in quartzofeldspathic granulites

In high-grade (granulite facies) quartzofeldspathic rocks the progressive development of a fabric records contrasting deformation behaviour of quartz and feldspar. Feldspar has undergone deformation mainly by recrystallization-accommodated dislocation creep and produced smaller recrystallized grains progressively in the course of deformation. Quartz has not deformed solely by dislocation creep but also by a diffusion-controlled mechanism. Dislocation climb is important in the dislocation creep of quartz. In contrast to feldspar, quartz grains have not recrystallized into smaller grains at any stage of deformation. Rather, they have transformed initially to short monocrystalline ribbons and ultimately to long polycrystalline ribbons. This textural change of quartz is a continuous process and has taken place in the course of bulk textural change of the rocks during the deformation.     

Retardation capacity of altered granitic rock distributed along fractured and faulted zones in the orogenic belt of Japan

There are wide areas of granitic rocks in the Japanese orogenic belt. These granitic bodies inevitably contain fracture and fault systems associated with alteration zones. However, relatively little attention has been given to the possible influence of such widely distributed alteration zones on the migration of radionuclides from any radioactive waste repository that might in future be sited within granitic rock. In particular, the influences of alteration products and micro-fractures, due to chemical sorption and/or physical retardation require further consideration. In order to understand the retardation capacity of the altered deep granitic rocks, detailed geometrical characterization of pores, geochemical analysis, and batch sorption and flow-through experiments have been carried out. Those results show that the altered granite has a large volume of accessible pores, particularly in potassium-feldspar grains, which would influence nuclide retardation more than the accessible porosity in other minerals present, such as biotite. The distribution coefficients, Kd estimated from batch sorption tests and flow-through experiments suggest that altered granite has a high capability to retard the migration of nuclides. The retardation would probably be due to sorption on altered minerals such as sericite and iron hydroxides formed along grain boundaries and in pores created by dissolution, in addition to sorption on primary sorptive minerals. These results provide confidence that even altered and fractured parts of any granitic rock that might be encountered in a site for the disposal of high level radioactive waste may still retard radionuclide migration and thereby help the geosphere to function as a barrier.     

Structures,kinematic analysis,rheological parameters and temperature-pressure estimate of the Mesozoic Xingcheng-Taili ductile shear zone in the North China Craton

The NE to ENE trending Mesozoic Xingcheng-Taili ductile shear zone of the northeastern North China Craton was shaped by three phases of deformation. Deformation phase D₁ is characterized by a steep, generally E–W striking gneissosity. It was then overprinted by deformation phase D₂ with NE-sinistral shear with K-feldspar porphyroclasts forming a subhorizontal low-angle stretching lineation on a steep foliation. During deformation phase D₃, lateral motion accommodated by ENE sinistral strike-slip shear zones dominated. Associated fabrics developed at upper greenschist metamorphic facies conditions and show the deformation characteristics of middle- to shallow crustal levels. In some parts, the older structures have been in turn overprinted by late-stage sinistral D₃ shearing. Finite strain and kinematic vorticity in all deformed granitic rocks indicate a prolate ellipsoid (L-S tectonites) near plane strain. Simple shear-dominated general shear during D₃ deformation is probably of general significance. The quartz c-axis textures indicate prism-gliding with a dominant rhomb <a> slip and basal <a> slip system formed mainly at low-middle temperatures. Mineral deformation behavior, quartz c-axis textures, quartz grain size and the Kruhl thermometer demonstrate that the ductile shear zone developed under greenschist facies metamorphic conditions at deformation temperatures ranging from 400 to 500 °C. Dislocation creep is the main deformation mechanism at a shallow crustal level. Fractal analysis showed that the boundaries of recrystallized quartz grains had statistically self-similarities. Differential stresses deduced from dynamically recrystallized quartz grain size are at around 20–39 MPa, and strain rates in the order of 10⁻¹² to 10⁻¹⁴ s⁻¹. This indicates deformation of granitic rocks in the Xingcheng-Taili ductile shear zone at low strain rates, which is consistent with most other ductile shear zones. Hornblende-plagioclase thermometer and white mica barometer indicate metamorphic conditions of medium pressures at around ca. 3–5 kbar and temperatures of 400–500 °C within greenschist facies conditions. The main D₃ deformation of the ENE-trending sinistral strike-slip ductile shearing is related to the roll-back of the subducting Pacific plate beneath the North China Craton.     

Determining heterogeneous deformation for granitic rocks in the northern thrust in Wadi Mubarak belt,Eastern Desert,Egypt

Finite-strain was studied in the mylonitic granitic and metasedimentary rocks in the northern thrust in Wadi Mubarak belt to show a relationship to nappe contacts between the old granitic and metavolcano-sedimentary rocks and to shed light on the heterogeneous deformation for the northern thrust in Wadi Mubarak belt. We used the R_f/ϕ and Fry methods on feldspar porphyroclasts, quartz and mafic grains from 7 old granitic and 7 metasedimentary samples in the northern thrust in Wadi Mubarak belt. The finite-strain data shows that old granitic rocks were moderate to highly deformed and axial ratios in the XZ section range from 3.05 to 7.10 for granitic and metasedimentary rocks. The long axes (X) of the finite-strain ellipsoids trend W/WNW and E/ENE in the northern thrust in Wadi Mubarak belt. Furthermore, the short axes (Z) are subvertical associated with a subhorizontal foliation. The value of strain magnitudes mainly constants towards the tectonic contacts between the mylonitic granite and metavolcano-sedimentary rocks. The data indicate oblate strain symmetry (flattening strain) in the mylonitic granite rocks. It is suggested that the accumulation of finite strain was formed before or/and during nappe contacts. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes and foliation was formed during nappe thrusting.     

Detrital mode, mineralogy and geochemistry of the Sidi Aïch Formation (Early Cretaceous) in central and southwestern Tunisia: Implications for provenance, tectonic setting and paleoenvironment

The chemical and mineralogical composition of the Sidi Aïch Formation sandstones in central and southwestern Tunisia has been investigated in order to infer the provenance and tectonic setting, as well as to appraise the influence of weathering. The sixteen studied samples are mainly composed of quartz, feldspar, kaolinite and/or illite. Sidi Aïch sandstones are mainly arkosic, potassic feldspar-rich and immature. Much of the feldspar was transformed to kaolinite. Concerning the relation between sandstone detrital composition and their depositional setting, the Sidi Aïch Formation sandstone in the major studied localities, probably accumulated in relatively proximal small basins within the continental interior. However, for the Khanguet El Ouara study site, sandstones may have been deposited in a foreland basin which received recycled sediments from an adjacent orogenic belt.The source area may have included quartzose sedimentary rocks. The dominance of quartz and enrichment in immobile elements suggest that the depositional basins were associated with a passive margin. The petrography and geochemistry reflect a stable continental margin and sediments were derived from granitic and pegmatitic sources located in the southern parts of the Gafsa basin. High values for the chemical index of alteration (CIA) indicate that recycling processes might have been important. Particularly high CIA values in the Garet Hadid locality indicate more intense chemical alteration, either due to weathering processes or tectonic control.     

Strain accumulation and fluid–rock interaction in a naturally deformed diamictite,Willard thrust system,Utah (USA): Implications for crustal rheology and strain softening

Structural and geochemical patterns of heterogeneously deformed diamictite in northern Utah (USA) record interrelations between strain accumulation, fluid–rock interaction, and softening processes across a major fault (Willard thrust). Different clast types in the diamictite have varying shape fabrics related to competence contrasts with estimated effective viscosity ratios relative to micaceous matrix of: ∼6 and 8 for large quartzite clasts respectively in the Willard hanging wall and footwall; ∼5 and 2 for less altered and more altered granitic clasts respectively in the hanging wall and footwall; and ∼1 for micaceous clasts that approximate matrix strain. Within the footwall, matrix X–Z strain ratios increase from ∼2 to 8 westward along a distinct deformation gradient. Microstructures record widespread mass transfer, alteration of feldspar to mica, and dislocation creep of quartz within matrix and clasts. Fluid influx along microcracks and mesoscopic vein networks increased westward and led to reaction softening and hydrolytic weakening, in conjunction with textural softening from alignment of muscovite aggregates. Consistent Si, Al, and Ti concentrations between matrix, granitic clasts, and protoliths indicate limited volume change. Mg gain and Na loss reflect alteration of feldspar to phengitic muscovite. Within the hanging wall, strain is overall lower with matrix X–Z strain ratios of ∼2 to 4. Microstructures record mass transfer and dislocation creep concentrated in the matrix. Greater Al and Ti concentrations and lower Si concentrations in matrix indicate volume loss by quartz dissolution. Na gain in granitic clasts reflects albitization. Large granitic clasts have less mica alteration and greater competence compared to smaller clasts. Differences in strain and alteration patterns across the Willard thrust fault suggest overall downward (up-temperature) fluid flow in the hanging wall and upward (down-temperature) fluid flow in the footwall.     

The effects of diagenesis on the reservoir characters in sandstones of the Late Cretaceous Pab Formation,Kirthar Fold Belt,southern Pakistan

The Maastrichtian Pab Formation in the southern part of Pakistan is composed of fine- to very coarse-grained texturally mature quartz arenite and subordinate sublitharenite varieties. The sandstones have undergone intense and complex diagenetic episodes due to burial and uplift. Diagenetic modifications were dependent mainly on the clastic composition of sandstone, burial depth and thrust tectonics. Diagenetic events identified include compaction, precipitation of calcite, quartz, clay minerals and iron oxide/hydroxide, dissolution and alteration of unstable clastic grains as feldspar and volcaniclithic fragments as well as tectonically induced grain fracturing. The unstable clastic grains like feldspar and lithic volcanic fragments suffered considerable alteration to kaolinite and chlorite. Dissolution and alteration of feldspar and volcanic lithic fragments and pressure solution were the main sources of quartz cements. Mechanical compaction and authigenic cements like calcite, quartz and iron oxide/hydroxide reduced the primary porosity, whereas dissolution of clastic grains and cements has produced secondary porosity. Chlorite coatings on clastic grains have prevented quartz cementation. Coarse-grained, thick bedded packages of fluviodeltaic, shelf delta lobe and submarine channels facies have higher average porosity than fine-grained, thin bedded and bioturbated sandstone of deeper shelf and abyssal plain environments and these facies are concluded to be possible future hydrocarbon prospects.     

Metamorphism and deformation of mafic and felsic rocks in a magma transfer zone,Stewart Island,New Zealand

In the mingled mafic/felsic Halfmoon Pluton at The Neck, Stewart Island (part of the Median Batholith of New Zealand) some hornblende gabbros and diorites retain magmatic structures, whereas others show evidence of major changes in grain and inclusion shapes, and still others are amphibolite‐facies granofelses with few or no igneous relicts. These mafic to intermediate magmas crystallized in felsic magma relatively quickly, with the result that most deformation occurred at subsolidus conditions. It is suggested that mafic‐intermediate rocks with predominantly igneous microstructures spent less time in the magmatic system. The metamorphism of the mafic rocks appears to be ‘autometamorphic’, in the sense that elevated temperatures were maintained by magmatic heat during subsolidus cooling. Elevated temperatures were maintained because of repeated sheet injection and subconcordant dyke injection of hot basaltic and composite mafic‐felsic magmas, into a dominantly transtensional, km‐scale, outboard‐migrating, magmatic shear zone that operated semi‐continuously for between c. 140 and c. 130 Ma. Complete cooling occurred only when the system evolved to transpressional and the locus of magmatism migrated inboard (southward) between c. 130 and c. 120 Ma, associated with solid‐state mylonitic deformation. Intermingled granitic rocks escaped metamorphism, because they remained magmatic to lower temperatures, and experienced shorter and lower‐temperature subsolidus cooling intervals. However, the felsic rocks underwent relatively high‐temperature solid‐state deformation, as indicated by myrmekite replacing K‐feldspar and chess‐board subgrain patterns in quartz; locally they developed felsic mylonites. The felsic rocks were deformed in the solid state because of their high proportion of relatively weak minerals (quartz and biotite), whereas the mafic rocks mostly escaped subsolidus deformation, except in local high‐strain zones of hornblende‐plagioclase schist, because of their high proportion of relatively strong minerals (hornblende and plagioclase). We suggest that such contrasting microstructural features are diagnostic of long‐lived syntectonic magma transfer zones, and contrast with the more typical complex, batholith‐scale magma chambers of magmatic arcs.     

Textural and microstructural evidence for semi-brittle flow in natural fault rocks with varied mica contents

Fault rocks from the Siberia Fault Zone (SFZ) in southern New Zealand are derived from schists with varied mica contents. Regional evidence indicates that the rocks are exhumed from depths of 8-10 km and temperatures of 200-250 °C. Foliated cataclasites in a zone 5-40 m thick are accompanied by interlaced pseudotachylyte, and are cut through by a late-stage master fault and zones of random fabric cataclasite. Textures and microstructures in the foliated cataclasites reflect contemporaneous or cyclic operation of cataclastic, crystal-plastic and solution transfer deformation mechanisms, partitioned differently between different phases. The deformation regime is interpreted as a form of semi-brittle flow, facilitated by crystal-plastic deformation of phyllosilicate phases in a relatively weak interconnected matrix. Quartz and feldspar are deformed mainly by cataclasis. The presence of pseudotachylyte indicates the fault was seismically active, and non-localised semi-brittle flow was episodically punctuated by high strain-rate earthquake events. Late-stage formation of a discrete master fault probably reflects a change from semi-brittle flow to brittle faulting. The presently exposed level of the fault is thought to represent a section of the mid-crustal brittle-ductile transition in the seismogenic zone. Thus, this study provides a tangible natural example of theoretically and experimentally predicted fault rocks.