Metamorphic history of serpentinite mylonites from the Happo ultramafic complex, central Japan

Serpentinite mylonites from the Happo ultramafic complex show evidence of two stages of mylonitization at different temperature conditions. Peridotite mylonites exhibit two types of olivine – porphyroclasts and neoblasts – produced at the earlier stage. The olivine neoblasts have a stretching lineation with a fabric suggesting plastic deformation along (0 1 0) [0 0 1]. In addition to the olivine fabric, the stable association of olivine, orthopyroxene and tremolite in the peridotites that survived later serpentinization, and the Si and Na contents of tremolite, suggest that the earlier mylonitization took place at temperatures between 700 and 800 °C. Later mylonitization was associated with high‐temperature serpentinization to form serpentinite mylonites. In contrast to a common type of serpentinite in orogenic belts, the serpentinite mylonites are cohesively foliated, rich in olivine and diopside, and poor in antigorite. The diopside has low Al, Cr and Na contents typical of a retrograde origin, and the olivine has a homogeneous composition except in areas subjected to contact metamorphism at a later stage. Modal composition and mineral chemistry suggest that the serpentinite mylonites were formed by a hydration reaction of tremolite and olivine to produce diopside and antigorite under stable conditions of olivine, at temperatures between 400 and 600 °C. Later‐stage mylonitization has preferentially been superimposed on the earlier‐stage mylonite zone with a common direction of foliation. The difference in temperature between the two mylonitization stages suggests that the shear zone was episodically active during the emplacement of the Happo complex. Conditions of relatively high temperature for serpentinization at a convergent plate boundary and high permeability caused by the early mylonitization favoured the formation of the serpentinite mylonites.     

O–H isotope ratios of high pressure ultramafic rocks: implications for fluid sources and mobility in the subducted hydrous mantle

We examine the O-H isotope signatures of Alpine ultramafic rocks and eclogitic metagabbros of the Erro-Tobbio peridotite Unit (western Italian Alps), which record a subduction and exhumation cycle. Localization of subduction-related deformation along serpentinite mylonite shear zones favoured preservation of pre-subduction mantle and low temperature (oceanic) alteration assemblages within undeformed (meta)peridotite that underwent partial static recrystallization to high-pressure metamorphic parageneses. Bulk rock and mineral separate (clinopyroxene and serpentine) oxygen isotope ratios of the serpentinized mantle peridotites (5-8‰) are slightly enriched in ¹⁸O compared with those of the high-pressure metaperidotites and the serpentinite mylonites (4.4-7.6‰). The lowest values occur in high-pressure veins (3.5-5.7‰) and eclogitic metagabbros (3.1-5.3‰). These variations are comparable to variations observed in modern oceanic rocks and in non-subducted ophiolites. Preservation of pre-eclogitic '¹⁸O signatures of the Erro-Tobbio rocks and a lack of oxygen isotope re-equilibration between different shear zones imply local-scale fluid flow at low water/rock ratios and closed system behaviour during high-pressure metamorphism. Different serpentine generations show a bimodal distribution in 'D values: pre-eclogitic lizardite and chrysotile range from -102 to -77‰; high-pressure antigorite in the mylonites and in low strain metaperidotites range from -71 to -57‰ and -83 to -60‰, respectively. Comparable ranges occur in antigorite in the associated high-pressure veins, suggesting that the hydrogen signatures were acquired prior to veining. We propose that the isotopic variations reflect multiple events of fluid uptake in different geodynamic environments. The H- and O-isotope ratios in the eclogitic mylonites suggest that initial hydration occurred over a range of temperatures during local interaction with altered seawater along oceanic shear zones. The ¹⁸O-enriched and H-depleted compositions of chrysotile and lizardite in the mantle peridotites suggest that a second hydration event may have occurred as a result of interaction with metamorphic fluids at the early stages of burial in a forearc setting, where slabs undergo large-scale, low-temperature fluid fluxing. The oceanic mantle is thus a candidate for continuous hydration during its oceanic and early subduction history. The Erro-Tobbio unit thus represents an example of cycling of internally-derived fluids, whereby the different structural and textural domains behaved as relatively closed systems to fluid circulation during high-pressure metamorphism.     

超基性岩中锆石年龄的特征和意义——以西南天山UHP蛇纹岩中锆石U-Pb年龄为例

超基性岩本身难以生长锆石的特性,使得研究其中的锆石需要特别谨慎。超基性岩中的锆石虽然具有多解性,但是锆石也携带了很多演化信息。产出不同地质背景的超基性岩,其中的锆石特征不同。本文总结现有的研究实例表明:(1)经历高温高压变质作用的石榴橄榄岩通常通过交代作用获得锆石,且锆石能够记录峰期变质时代,其中的继承锆石较少,可能在高温高压条件下,继承锆石发生分解重结晶;(2)大洋蛇绿岩型超基性岩和地幔岩捕掳体中通常具有年龄分布很广的锆石年龄特征,锆石年龄峰值通常与区域上构造事件相吻合,为捕掳晶锆石。接下来本文以西南天山超高压(UHP)蛇纹岩为例,对其锆石年龄进行解释。西南天山蛇纹岩为经历过超高压变质作用的大洋蛇绿岩型超基性岩,2个蛇纹岩样品中锆石的阴极发光图像分析和SIMS U-Pb定年分析结果显示,西南天山UHP蛇纹岩中的锆石包含捕掳晶锆石和变质锆石,捕掳晶锆石的年龄为2.1~1.0Ga,对应该区变泥质岩中碎屑锆石记录的年龄峰值。409~537Ma可能代表了蛇纹岩原岩结晶时代。区域上的变质压力峰期年龄(~320Ma)在蛇纹岩中没有记录,仅有1颗锆石记录了309±5Ma的近峰期时代。270~155Ma的退变质时代在西南天山蛇纹岩中出现较广,这与榴辉岩中出现的退变年龄相吻合,代表了折返过程中较为普遍的后期热液事件。基于对超基性岩中锆石特征的初步了解,结合西南天山蛇纹岩的研究实例,认为通过研究锆石的年代学,结合锆石矿物化学、包体矿物学、同位素地球化学等特征,不仅可以提供年代学信息,还可以对超基性岩的来源和演化过程进行解析。     

Fluid-assisted fracturing,cataclasis, and resulting plastic flow in mylonites from the Moresby Seamount detachment,Woodlark Basin

The Moresby Seamount detachment (MSD) in the Woodlark Basin (offshore Papua New Guinea) is a large active low-angle detachment excellently exposed at the seafloor, and cutting through mafic metamorphic rocks. Hydrothermal infiltration of quartz followed by that of calcite occurred during cataclastic deformation. Subsequent deformation of these a priori softer minerals leads to mylonite formation in the MSD. This study aims at a better understanding of the deformation mechanism switch from cataclastic to plastic flow. Deformation fabrics of the fault rocks were analyzed by light-optical microscopy. Rheologically critical phases were mapped to determine distributions and area proportions, and EBSD was used to measure crystallographic preferred orientation (CPO). Strong calcite CPOs indicate dominant dislocation creep. Quartz CPOs, however, are weak and more difficult to interpret, suggesting at least some strain accommodation by diffusion creep mechanisms. When quartz aggregates are intermixed with the polymineralic mylonite matrix diffusion creep grain boundary sliding may be dominant. The syntectonic conversion from mafic cataclasites to more siliceous and carbonaceous mylonites induced by hydrothermal processes is a critical weakening mechanism enabling the MSD to at least intermittently plastic flow at low shear stresses. This is probably a crucial process for the operation of low-angle detachments in hydrated and dominantly mafic crust.     

The origin and P–T evolution of peridotites and serpentinites of NE New Caledonia: prograde interaction between continental margin and the mantle wedge

The Pouébo and Diahot terranes of NE New Caledonia mostly comprise eclogite to blueschist facies metabasite and metasedimentary rocks that experienced c. 40 Ma metamorphism. This Eocene high‐P event has been linked with the SW‐directed obduction of the New Caledonian Ophiolite, an extensive ultramafic nappe that dominates outcrop in the south of the island. In the north, ultramafic lithologies are found only as sheets or discrete lenticular masses interleaved with, but separated from, the eclogites and blueschists by foliated talc–chlorite–serpentine–carbonate‐bearing rocks. The base of the largest and best‐preserved ultramafic body at Yambé is marked by a distinctive (2 m thick) layer of high‐P mylonite that preserves evidence for early blueschist facies conditions (S1) as inclusions in eclogite facies minerals. Textural evidence preserved in olivine‐bearing serpentinites and their bounding mafic mylonites suggest that the ultramafic bodies were emplaced within the structurally highest levels of the high‐P terrane as serpentinite tectonites sourced from hydrated mantle, formerly in the hangingwall of the Eocene subduction zone. Serpentinite emplacement accompanied burial of the NE New Caledonian margin at T<500 °C and P<16 kbar. The ultramafic fragments were buried to depths of 50–60 km in the subduction zone, where olivine was stable and coarse‐grained garnet–omphacite‐rich assemblages developed in low strain domains within enclosing mylonites. Host metabasic and metasedimentary rocks from the structurally highest portions of the high‐P belt have a prograde record identical to that of the ultramafic tectonites. The early emplacement and similar P–T history of host rocks and ultramafic masses suggest that NE New Caledonia preserves a fossil slab/mantle–wedge boundary reactivated during exhumation.     

定结地区韧性剪切带变形特征与糜棱岩研究

定结地区位于喜马拉雅造山带中段 ,发育有多方向、多尺度、多层次、多期次的韧性剪切带。在剪切带中 ,各种韧性变形组构极为丰富 ,表明剪切带岩石的变形主要为韧性变形机制所致。变形岩石类型为花岗质糜棱岩、长英质糜棱岩和硅质糜棱岩 ;由于岩石受糜棱岩化作用程度的不同 ,在韧性剪切带中发育糜棱岩化岩石、初糜棱岩、糜棱岩及超糜棱岩 ;剪切带岩石的变形温度为 2 0 8～ 5 5 9℃。     

Microstructural analysis and P–T conditions of the Azul megashear zone, Tandilia, Buenos Aires province, Argentina

A microstructural analysis was carried out on mylonitic rocks of the Azul megashear zone (AMSZ), Tandilia, which were formed in a range of metamorphic conditions from lower greenschist to amphibolite facies. Tailed porphyroclasts are common and mostly symmetric. Scarce asymmetric rotated porphyroclasts show both sinistral and dextral senses of shear. In sections parallel to the mylonitic foliation, porphyroclasts are round. The AMSZ is probably related to the late Transamazonian orogenic cycle and may be due to NNE–SSW-directed convergence. In weakly deformed protolith and protomylonites, quartz deforms by dynamic recrystallization, mainly subgrain rotation in dislocation creep Regime 2. K-feldspar porphyroclasts and plagioclase show scarce fracturation and deform by dynamic recrystallization along grain boundaries. Quartz microstructures in mylonites indicate predominantly Regime 3 grain boundary migration recrystallization. Feldspar structures indicate recrystallization through the nucleation and growth of new grains at grain boundaries. The temperatures of deformation from mineral assemblages in the CNKFMASH system in four bulk compositions are in the range of 400–450 °C, and the pressures are more than 6 kb.     

Structural and textural development in Singhbhum shear zone,eastern India

The rocks within the Singhbhum shear zone in the North Singhbhum fold belt, eastern India, form a tectonic melange comprising granitic mylonite, quartz-mica phyllonite, quartz-tourmaline rock and deformed volcanic and volcaniclastic rocks. The granitic rocks show a textural gradation from the least-deformed variety having coarse-to medium-grained granitoid texture through augen-bearing protomylonite and mylonite to ultramylonite. Both type I and type II S-C mylonites are present. The most intensely deformed varieties include ultramylonite. The phyllosilicate-bearing supracrustal rocks are converted to phyllonites. The different minerals exhibit a variety of crystal plastic deformation features. Generation of successive sets of mylonitic foliation, folding of the earlier sets and their truncation by the later ones results from the progressive shearing movement. The shear sense indicators suggest a thrust-type deformation. The microstructural and textural evolution of the rocks took place in an environment of relatively low temperature, dislocation creep accompanied by dynamic recovery and dynamic recrystallization being the principal deformation mechanisms. Palaeostress estimation suggests a flow stress within the range of 50–190 MPa during mylonitization.     

超高压变质岩的塑性流变：显微构造和变形机制

超高压变质岩是大陆深俯冲作用的产物。超高压变质岩在深俯冲和快速折返过程中,经历了长距离地构造搬运和构造力的作用。其构造变形主要集中在韧性剪切带中,并发生强烈地塑性流变。研究超高压变质构造岩的显微构造及其变形机制对于深入了解大陆壳岩石在深俯冲过程中的流变学行为有十分重要的意义,山东仰口的超高压韧性剪切带中榴辉岩质和花岗质糜棱岩记录了超高压变形的历史。在超高压条件下的稳定矿物绿辉石、多硅白云母、兰晶石和钾长石具有不规则波状消光、亚晶界、核幔构造和动态重结晶等显微构造特征,TEM 研究揭示了大量的位错构造,表明位错蠕变是其主要的变形机制。在花岗质糜棱岩中,金红石在刚性矿物的压力影中沉积,细粒的石榴石条带平行片理延伸,都说明超高压变形过程中有流体存在,流体助力的物质扩散迁移是又一个重要的变形机制。依据现有的流变学定律估算的流变应力应该在几十兆帕以上。     

Interdependence of deformation, fluid infiltration and reaction progress recorded in eclogitic metagranitoids (Sesia Zone, Western Alps)

The effects of high-strain deformation and fluid infiltration during Alpine eclogite facies metamorphism have been studied across ductile shear zones in relatively undeformed metagranitoids at Monte Mucrone (Sesia Zone, Western Alps, Italy). Microfabrics together with bulk rock and stable isotope data indicate that the mineralogical and chemical variations are related to the degree of deformation, rather than to changes in P-T conditions or tectonic position. Transformation of meta-quartz diorite to recrystallized eclogitic mylonites involved the breakdown of biotite and plagioclase and required the influx of H₂O. Bulk-rock geochemical data show that ductile deformation to form eclogitic mylonites involved an increase in volume with a weight percent gain in H₂O and Si and variable loss of K, Na, Ca and Al. δ¹⁸O changes systematically across ductile shear zones into the undeformed country rocks. Constant values in shear zone centres indicate advection parallel to the shear zone and within 10 cm of the mylonites. A dominant component of diffusive oxygen exchange perpendicular to the shear zones produced isotopic fronts, evident from a gradual increase in δ¹⁸O values to the reference values of the country rocks. The degree of isotopic shift within the shear zones reflects increasing deformation and degree of reaction progress. Multiple phases of Alpine deformation and mineral growth are recognized in the Monte Mucrone metagranitoids, and in some cases, eclogite facies shear zones were reactivated under greenschist facies conditions. The results of this study suggest that high-strain deformation provided pathways for both synkinematic and post-kinematic metamorphic fluids which were necessary for complete reactions. Relict igneous fabrics, as well as the presence of corona textures around biotite and pseudomorphs after primary igneous plagioclase in the least deformed rocks, indicate a paucity of hydrous fluids and support the conclusion that fluid movement was channelled rather than pervasive.     

Tectonometamorphic evolution of the Neoproterozoic Delgo suture zone,Northern Sudan

In the area around Delgo in north-east Sudan a narrow NNE-trending Neoproterozoic belt of low grade volcanosedimentary rocks is fringed by high grade migmatitic basement blocks. The volcanosedimentary sequence is structurally overlain by a rock body of several kilometres length, which is composed of metamorphosed ultramafic and mafic rocks. This sequence is interpreted as an island arc-ophiolite association representing a suture zone.With respect to their degrees of metamorphism and their structural characteristics, the lithological units of the Delgo area are significantly different from the adjacent basement rocks in the east and west. The lithological contacts of the metavolcanic-metasedimentary rocks with the basement rocks are often marked by intermediate-dipping mylonites which are locally overprinted by ductile to brittle-ductile strike-slip faults.The Delgo suture evolved through the subduction-related closure of an oceanic basin and final collision of the island arc with the migmatitic basement blocks on either side of the oceanic basin. Peak metamorphism of deeply buried back-arc basin sequences occurred at around 700 Ma ago. During the collision stage, island arc rocks, passive margin sequences and ophiolitic rocks were thrust to the east and west over the basement blocks, causing limited crustal thickening and a minor isostatic rebound.Lithospheric extension associated with increasing heat flow caused migmatization in the basement between ca. 580 and 540 Ma ago. The development of numerous intermediate-dipping mylonitic shear zones at decreasing temperatures post-dates the migmatization. Lithospheric extension may explain the juxtaposition of rocks which were formed and/or metamorphosed at significantly different crustal levels.     

Grain-size reduction of feldspars by fracturing and neocrystallization in a low-grade granitic mylonite and its rheological effect

Feldspar grain-size reduction occurred due to the fracturing of plagioclase and K-feldspar, myrmekite formation and neocrystallization of albitic plagioclase along shear fractures of K-feldspar porphyroclasts in the leucocratic granitic rocks from the Yecheon shear zone of South Korea that was deformed under a middle greenschist-facies condition. The neocrystallization of albitic plagioclase was induced by strain energy adjacent to the shear fractures and by chemical free energy due to the compositional disequilibrium between infiltrating Na-rich fluid and host K-feldspar. With increasing deformation from protomylonite to mylonite, alternating layers of feldspar, quartz and muscovite developed. The fine-grained feldspar-rich layers were deformed dominantly by granular flow, while quartz ribbons were deformed by dislocation creep. With layer development and a more distributed strain in the mylonite, lower stresses in the quartz-rich layers resulted in a larger size of dynamically recrystallized quartz grains than that of the protomylonite.     

哀牢山-红河剪切带左行走滑作用起始时间约束

位于哀牢山-红河剪切带NW延伸方向上的点苍山变质杂岩体遭受强烈的左行走滑剪切变形、变质作用改造,岩石中保存了典型的高温矿物组合以及由它们构成的宏观和微观高温变形构造特征,其中糜棱岩中具有极其发育的长石矿物拉伸线理而形成典型的L与LS型构造岩是其一个明显的特征。本文对点苍山地区高温糜棱岩主要矿物开展了显微构造与矿物变形、变形机制及组构分析,并对于遭受高温糜棱岩化改造的一个花岗质岩体开展了SHRIMP锆石U-Pb定年分析。结果表明岩石中长石、角闪石、石英等主要矿物具有典型的达角闪岩相条件下的高温晶质塑性变形和动态生长特征,它们也为走滑剪切变形活动提供了充分的微观构造证据。对于点苍山高温糜棱岩化改造的眼球状或似斑状二长花岗岩的显微构造分析结果表明,这套花岗质岩石从走滑剪切前期岩浆的侵位之后经历了早期强烈的岩浆期后交代作用—亚岩浆流动—高温固态塑性剪切变形的递进演化过程。由此可见,岩浆的上升与就位受左行走滑剪切作用的制约,岩体又遭受了强烈剪切变形改造。同时对这套构造前期就位花岗质岩石中的锆石进行定年分析,获得33.88±0.32Ma的岩浆结晶年龄,为此,我们有充分的理由认为,在点苍山地区哀牢山-红河剪切带左行走滑剪切作用的起始时间至少应该为早渐新世30.88±0.32Ma。     

Timing the tectonic mingling of ultramafic rocks and metasediments in the southern section of the coastal accretionary complex of central Chile

Uranium-lead ages are reported for zircons from ultramafic bodies and metamorphic host rocks of the Western Series that outcrop at La Cabaña, in the southern section of the coastal accretionary complex of central Chile. Metasedimentary mica schists hosting the ultramafic bodies contain a main detrital zircon population of Devonian age (365–380 Ma) clustering around ~368 Ma, differing significantly from neighbouring areas where Devonian zircons are scarce. Zircons from the metasomatic reaction zones (albitites and chloritites), formed during the emplacement and alteration of the ultramafic bodies, are mainly Ordovician (~478 Ma) and lack Devonian zircons, resembling a typical detrital zircon pattern from other locations in the Western Series. Zircons from the chloritite reaction zone of the Lavanderos serpentinite, the easternmost ultramafic body in La Cabaña, are in textural equilibrium with metamorphic ilmenite. Some of these zircons yield an average age of 283.4 ± 7 Ma (n = 6) which is identical, within error, to a previously reported K-Ar fuchsite cooling age of 282 ± 6 Ma from the reaction zone. Most zircons extracted from chromitite boulders have euhedral oscillatory-zoned growth patterns with a similar range of ages than those reported for the Western Series (324–1090 Ma; n = 12), except for two zircons with cloudy appearance and high U/Th ratios which yielded an average age of 285.5 ± 7 Ma. The presence of Early Permian zircons (~280–290 Ma) in all studied rocks suggests remobilization of Zr, possibly triggered by metasomatic fluids released during the disequilibrium reaction associated with the tectonic emplacement of the ultramafic rocks into the metasedimentary rock. Simultaneously with the formation of metasomatic zircons, Palaeozoic and Mesoproterozoic zircons from the metasedimentary rocks were mechanically incorporated into the ultramafic rocks, thus providing a record of the timing of crustal emplacement of the ultramafic rocks into the accretionary complex.     

Strain partitioning into dry and wet zones and the formation of Ca-rich myrmekite in syntectonic syenites: A case for melt-assisted dissolution-replacement creep under granulite facies conditions

The formation of Ca-rich myrmekites is described in syntectonic syenites crystallized and progressively deformed under granulite facies conditions. The syenites are found in high- and low-strain zones where microstructure and mineral composition are compared. Heterogeneously distributed water-rich, late-magmatic liquids were responsible for strain partitioning into dry and wet high-strain zones at outcrop scale, where contrasting deformation mechanisms are reported. In dry high-strain zones K-feldspar and clinopyroxene are recrystallized under high-T conditions. In wet high-strain zones, the de-stabilization of clinopyroxene and pervasive replacement of relatively undeformed K-feldspar porphyroclasts by myrmekite and subordinate micrographic intergrowths indicate dissolution-replacement creep as the main deformation mechanism. The reworking of these intergrowths is observed and is considered to contribute significantly to the development of the mylonitic foliation and banding. A model is proposed for strain partitioning relating a positive feedback between myrmekite-forming reaction, continuous inflow of late-magmatic liquids and dissolution-replacement creep in the wet zone at the expenses of original mineralogy preserved in the dry zones. Melt-assisted dissolution-replacement creep in syntectonic environments under granulite-facies conditions may extend the field of operation of dissolution-replacement creep, changing significantly the rheology of the lower continental crust.     

Mylonitic microfabrics from the rocks of MCT zone in Alakhnanda valley,Garhwal Himalaya

MCT Zone of Alakhnanda valley is a major ductile shear zone in Garhwal Himalaya, which is characterised by different types of mylonite rocks. On the basis of grain size and the percentage of matrix in the rock, zones comprising protomylonite, augen mylonite, mylonite and ultramylonite have been identified. The study of microstructures, grain size and crystallographic preferred orientation of quartz c-axis fabric reveals that the rocks of the MCT zone were deformed by a combination of intracrystalline creep (power law creep) and grain boundary migration (sliding super plasticity).     

Petrostructural evolution of ultramafic rocks of the Kalninsky chromite-bearing massif, Western Sayan

The Kalininsky ultramafic massif is a fragment of lower structural zone of the Kurtushiba ophiolitic belt in the extreme northeastern part of the Western Sayan. The massif is composed largely of rocks making up the dunite-garzburgite banded complex. The northeastern part of the massif is composed mainly of dunite with linear NW-trending chromite-bearing zones, the localization of which is controlled by banding of the dunite-harzburgite complex. Harzburgite and dunite are characterized by inhomogeneous structures and textures caused by nonuniform ductile deformation, which is expressed as heterogeneous extinction, kink bands, and syntectonic and annealing recrystallization. The petrostructural patterns of olivine in harzburgite and dunite provide evidence for three stages of ductile deformation. At the first stage under deep mantle-crustal conditions, the ductile flow of ultramafic rocks developed mainly in a regime of axial compression, high temperature (>1000°C), and low strain rate (? < 10^?6 s^?1), which resulted in translational gliding along the (010)[100] and (100)[001] systems in olivine and enstatite, respectively, in combination with a subordinate role of syntectonic recrystallization. Consequently, the rocks acquired a medium-grained (mesogranular) microstructure. At the second stage, related to the thermal effect on ultramafics, the ductile flow developed under the settings of low strain rate (? < 10^?6 s^?1) and rising temperature (>1000°C). The translational gliding in olivine proceeded largely along (010)[100] and was accompanied by diffusion creep. As the temperature rose, ductile deformation gave way to secondary recrystallization of annealing, which facilitated the growth of olivine grains free of dislocations owing to absorption of individual grains oriented adversely relative to the compression axis and deformed grains saturated with dislocations. As a result, dunite and harzburgite with a coarse-grained porphyroblastic microstructure have been formed. The third stage of ductile flow was apparently related to their transport along deep-seated thrust faults under settings of intense shear deformations at a high temperature (～1000°C) and strain rate (? >10^?4 s^?1). The ductile flow in olivine resulted in heterogeneous translational gliding along (010)[100] and accompanied by intense syntectonic recrystallization with the formation of a porphyroblastic microstructure. Chromite mineralization in dunite is controlled by internal banding. Intense ductile flow facilitated the metamorphic separation of linearbanded Cr-spinel segregations. Thus, the results of a petrostructural study show that ultramafic rocks of the Kalninsky massif, ascending to the upper lithosphere, underwent both axial and shear ductile deformations in the mantle and lower crust, and these deformations controlled chromite mineralization.     

Formation of low-temperature mylonites and phyllonites by alkali-metasomatic weakening of felsic volcanic rocks during progressive,subduction-related deformation

Dacitic to rhyolitic volcanic rocks of the Spruce Lake nappe experienced two phases of alkali-metasomatism as a result of fluids channelling along shear zones. The shear zones formed during a progressive, thrust-related deformation associated with underplating and incorporation of the volcanic rocks into the Brunswick subduction complex of northern New Brunswick. The fluids mainly represent chemically and isotopically modified seawater released by dewatering of the associated underthrusted shaly sedimentary rocks. Both phases of metasomatism weakened the felsic rocks, leading to strain localisation. Albitisation of felsic volcanic rocks as a result of Na-metasomatism during underthrusting facilitated formation of mylonites near peak high-pressure metamorphism (330–370°C, 600–800 MPa). The mylonites are preferentially preserved in the roof-thrust shear zone of the Spruce Lake nappe. Core-mantle structures, bulging and crystallographically preferred orientations indicate that albite behaved more ductilely than K-feldspar. The ductility of albite at these low temperatures is interpreted as a function of abundant intragranular fluids. Phengite-rich phyllonites formed after peak high–pressure metamorphism during uplift by out-of-sequence thrusting. These phyllonites are generally characterised by a slight gain in K and loss of Na and are best developed in the basal shear zones of the Spruce Lake nappe.     

Grain-size-sensitive creep of plagioclase accompanied by solution–precipitation and mass transfer under mid-crustal conditions

We report here on a study of three deformed granitoids: two mylonites and an ultramylonite from the inner ductile shear zone of the Ryoke metamorphic belt, SW Japan. Monophase layers composed of quartz, plagioclase or K-feldspar are present in all samples. The plagioclase-rich layers consist of grains 6–10 μm in size, and sometimes include patchy K-feldspar and quartz, indicating solution-precipitation. In the mylonite, the fine-grained plagioclase is mainly An_23–25 and, the composition of plagioclase porphyroclast is An_21–39 without any significant maximum. The An compositions together with textural observations indicate that fine-grained plagioclase nucleated from solution with mass transfer during deformation. In the ultramylonite, fine-grained plagioclase is widely changed to be An_15–37, indicating that the grain-size-reduction process includes fracturing of original plagioclase porphyroclasts in addition to the solution–precipitation process, which results in the composition concentrated around An₃₀. In all samples, the crystallographic orientations of fine-grained plagioclases are almost random and do not correlate with neighbouring porphyroclasts. Grain-size-sensitive creep occurred during rock deformation subsequent to the process of solution–precipitation that involved mass transfer via fluids.     

Geology,Geochemistry, and Evolution of the Divrigi and Kuluncak Ophiolitic Melanges,with Reference to Serpentinites in East-Central Turkey

The Divrigi and Kuluncak ophiolitic mélanges are located in central Anatolia in the Tauride ophiolite belt. The stratigraphic sequence in the Divrigi ophiolitic mélange includes, from bottom to top, the Upper Jurassic-Lower Cretaceous Akdag limestone, Upper Cretaceous Çalti ultramafic rocks, and the Curek listwaenite. The Divrigi ophiolitic mélange is intruded by the Late Cretaceous-Eocene Murmano pluton. The above stratigraphic sequence is followed by the Eocene-Paleocene Ekinbasi metasomatite and the Quaternary Kilise Formation.

The oldest sequence of rocks in Kuluncak ophiolitic mélange in the GuvenÇ area is the Karadere serpentine/ultramafic body overlain successively by the Kurtali gabbro, Gundegcikdere radiolarite, the GuvenÇ listwaenites, and the Buldudere Formation. All of these units are Late Cretaceous in age. The Karamagra siderite deposit in the Hekimhan area probably was formed in the Lower Cretaceous at the contact between Çalti ultramafic rocks and the Buldudere Formation. The Kuluncak ophiolitic mélange was intruded by a subvolcanic trachyte in the Late Cretaceous. The Eocene-Paleocene Konukdere metasomatite, the Miocene Yamadag volcanic rocks, and Quaternary slope deposits are late in the stratigraphic sequence in the GuvenÇ area.

The Kuluncak ophiolitic mélange in the Karakuz area is similar to that at GuvenÇ; however, gabbro, radiolarite, and Miocene volcanic rocks are not present. The Miocene is represented by the Ciritbelen Formation at Karakuz and the Karakuz iron deposit is hosted by a Late Cretaceous subvolcanic trachyte.

The rareearth and trace-element concentration of serpentinite in the Divrigi and Kuluncak ophiolitic mélanges indicate that all of the ultramafics and their alteration products were derived from a MORB, which was depleted in certain elements and oxides. The results expressed in this study support the idea that the Divrigi and Kuluncak ophiolitic mélanges within the Tauride ophiolite belt originated from Northern Tauride oceanic lithosphere (Poisson, 1986), instead of a northern branch of Neo-Tethys (Sengor and Yilmaz, 1981).