Progressive development of structures in a ductile shear zone

In the Singhbhum Shear Zone of eastern India successive generations of folds grew in response to a progressive ductile shearing. During this deformation a mylonitic foliation was initiated and was repeatedly transposed. The majority of fold hinges were formed in an arcuate manner at low angles to the Y-axis in an E-W trending subhorizontal position and major segments of the fold hinges were then rotated towards the down-dip northerly plunging X-axis. The striping and intersection lineations were rotated in the same manner. The down-dip mylonitic lineation is a composite structure represented by rotated early lineations and newly superimposed stretching lineations. The consistent asymmetry of the folds, the angular relations between C and S surfaces and the evidence of two-dimensional boudinage indicate that the deformation was non-coaxial, but with a flattening type of strain with λ₁ ⪢ λ₂. The degree of non-coaxiality varied both in space and time. From the progressive development of mesoscopic structures it is concluded that the 2–3 km wide belt of ductile shear gave rise to successive anastomosing shear zones of mesoscopic scale. When a new set of shear lenses was superimposed on already sheared rocks, the preexisting foliation generally lay at a low angle to the lenses. No new folds developed where the acute angle was sympathetic to the sense of shear displacements. Where the acute angle was counter to the sense of shear, the pre-existing foliation, lying in the instantaneous shortening field, was deformed into a set of asymmetric folds.     

Andalusite–sillimanite–quartz veins as indicators of low-pressure–high-temperature deformation during late-stage unroofing of a metamorphic core complex, Turkey

Ductilely deformed veins consisting of quartz+andalusite, in which the andalusite is partially replaced by fibrous sillimanite, locally occur in garnet–sillimanite schist near a margin of the Niğde metamorphic core complex in south-central Turkey. Mineral assemblages, reaction textures and structural features of the veins record low-pressure–high-temperature deformation during exhumation of mid-crustal rocks. The partial replacement of andalusite by sillimanite may indicate a late-stage increase in temperature and/or fluid pressure, possibly related to Miocene magmatism, during extensional unroofing of the core complex. Aluminosilicate-bearing veins are observed at the eastern margin of the massif where metapelitic rocks were deformed during unroofing of the core complex. Veins formed in aluminous rocks where deformation-enhanced permeability allowed fluid flow during extensional shear. The cm-scale veins are typically boudinaged and form asymmetric lenses concordant with the host rock foliation and are parallel to the down-dip lineation defined by sillimanite and stretched biotite. Aluminosilicate-bearing boudins record top-to-the-east shear sense, which is compatible with the extensional shear sense displayed by structures in the host rock.     

Structural and textural development in Singhbhum shear zone,eastern India

The rocks within the Singhbhum shear zone in the North Singhbhum fold belt, eastern India, form a tectonic melange comprising granitic mylonite, quartz-mica phyllonite, quartz-tourmaline rock and deformed volcanic and volcaniclastic rocks. The granitic rocks show a textural gradation from the least-deformed variety having coarse-to medium-grained granitoid texture through augen-bearing protomylonite and mylonite to ultramylonite. Both type I and type II S-C mylonites are present. The most intensely deformed varieties include ultramylonite. The phyllosilicate-bearing supracrustal rocks are converted to phyllonites. The different minerals exhibit a variety of crystal plastic deformation features. Generation of successive sets of mylonitic foliation, folding of the earlier sets and their truncation by the later ones results from the progressive shearing movement. The shear sense indicators suggest a thrust-type deformation. The microstructural and textural evolution of the rocks took place in an environment of relatively low temperature, dislocation creep accompanied by dynamic recovery and dynamic recrystallization being the principal deformation mechanisms. Palaeostress estimation suggests a flow stress within the range of 50–190 MPa during mylonitization.     

Evolution of microstructures in Precambrian shear zones: An example from eastern India

Shear zones are areas of intense deformation in localized zones which can be used as natural laboratories for studying deformation characteristics. Metre to-micro scale structures that develop in response to a progressive simple shear in a shear zone are characterized by a protracted history of deformation and are immensely useful in delineating the history of progressive deformation. To decipher these localized zones of deformation and to establish the continuous non-coaxial character of deformation, detail microstructural studies are very useful. Singhbhum shear zone (SSZ), a regional Precambrian tectonic dislocation zone in eastern India, depicting a top-to-south thrust movement of the hanging wall provides a scope for studying microstructural characteristics developed in response to a progressive shear at mid-crustal level. SSZ is characterized by intense stretching lineation, isoclinal folds, shear planes, superposed schistosity and deformed quartz veins. Quasi-plastic (QP) deformation mechanisms were predominantly active in the SSZ. The overprinting relationship between the earlier and later schistosity with a consistent sense of shear indicates that earlier schistosity is transposed to later schistosity through the intermediate stages of crenulation cleavage during a progressive non-coaxial deformation. The recrystallization of quartz in mylonitic quartzite suggests protracted history of deformation. The analysis of the character of quartz grains of both the porphyroclasts and recrystallized grains suggests that strain was partitioned between the most intensely deformed central part of the shear zone and the shear-related deformation zone outside the central part of the shear zone.     

Fabric development in shear zones: theoretical controls and observed phenomena

It is suggested that the kinematic framework controls the orientation of crystallographic fabrics developed in plastically deformed quartzites. Important directions in this framework are those of the instantaneous stretching axes, and the flow plane and flow direction if these can be uniquely defined. Rotation of the crystal axes takes place at any instant of time dependent on the orientation of the grain relative to the stretching axes. Because of this dependence the skeletal outline^* of a pattern of preferred orientation is sensitive to the closing stages of deformation. Thus fabrics measured in major movement zones cannot be related to early thrust or shear displacements without considering the effects of the geological history subsequent to those events.Nevertheless, asymmetric fabrics in movement zones may allow determination of the shear direction and sense of shear. Asymmetry in the intensity distribution is less susceptible to modification than asymmetry in the fabric skeleton, and may remain as a persistent measure of the sense of shear in mylonites subjected to coaxial deformation after non-coaxial events. However, fabric asymmetry need not always be related to the deformation history, and effects related to the population of initial grain-orientations must be considered, as well as the influence of recrystallization and grain growth.A problem of scale is involved in extrapolating the movement picture inferred from the behaviour of a few hundred crystal grains to larger dimensions. This question is also encountered when trying to specify deformation paths in mesoscopic shear zones. It is difficult to obtain simple shear experimentally because of the role discontinuities play in deformation. In certain cases in natural shear zones the quartz grains may be subjected to a coaxial deformation path while the bulk deformation is progressive simple shear. Caution must therefore be exercised when attempting to use quartz fabrics to infer characteristics of the bulk kinematics or movement picture applicable during deformation.     

Kinematics and geochronology of Early Cretaceous thrusting in the northwestern paleozoic of Graz (Eastern Alps)

Abstract

The multiply deformed Upper Austro-Alpine nappe pile of the Graz area is built up of low-grade metamorphosed Paleozoic rocks which are discordantly overlain by sediments of Santonian (Late Cretaceous) age (“Gosau” formation). Slices of Permo-Mesozoic rocks are absent. Analyses of structures, microfabrics, strain and shear directions were used to decipher the kinematic history; geochronological investigations to date the age of thrusting. K/Ar and Rb/Sr ages of synkinematically grown mica suggest an eo-Alpine (Early Cretaceous) age for the major deformation D1. D1 is characterized by non-coaxial rock flow which caused SW- to W directed nappe imbrication. Incremental strain measurements indicate the progressive superposition of D2 over Dl. In the higher nappe (Rannach Nappe) nappe imbrication continued during D2 changing the direction of nappe transport from SW to NW. Enhanced flattening strain in the deeper nappe (Schöckel Nappe) led to recumbent folds in all scales during D2. This study emphasized two interpretations : (1) The Alpine deformation in the Upper Austro-Alpine nappe pile of the Paleozoic of Graz started in the Earliest Cretaceous (about 125 Ma.). (2) The emplacement of nappes followed a curved translation path in the studied area.     

Deformation of footwall rock of Phulad Shear Zone,Rajasthan: Evidence of transpressional shear zone

Phulad Shear Zone (PSZ) of Delhi Fold Belt in Rajasthan is a northeasterly striking ductile shear zone with a well developed mylonitic foliation (035/70E) and a downdip stretching lineation. The deformation in the PSZ has developed in a transpressional regime with thrusting sense of movement. The northeastern unit, i.e., the hanging wall contains a variety of rocks namely calc-silicates, pelites and amphibolites and the southwestern unit, i.e., the footwall unit contains only granitic rocks. Systematic investigation of the granites of the southwestern unit indicate a gradual change in the intensity of deformation from a distance of about 1 km west of the shear zone to the shear zone proper. The granite changes from weakly deformed granite to a mylonite/ultramylonite as we proceed towards the PSZ. The weakly deformed granite shows a crude foliation with the same attitude of mylonitic foliation of the PSZ. Microscopic study reveals the incipient development of C and S fabric with angle between C and S varying from 15 ^° to 24 ^°. The small angle between the C and S fabric in the least deformed granite variety indicates that the deformation has strong pure shear component. At a distance of about 1 m away from the PSZ, there is abrupt change in the intensity of deformation. The granite becomes intensely foliated with a strong downdip lineation and the rock becomes a true mylonite. In mesoscopic scale, the granite shows stretched porphyroclasts in both XZ and YZ sections indicating a flattening type of deformation. The angle between the C and S fabric is further reduced and finally becomes nearly parallel. In most places, S fabric is gradually replaced by C fabric. Calculation of sectional kinematic vorticity number ( W_n) from the protomylonitic and mylonite/ultramylonite granites varies from 0.3 ± 0.03 to 0.55 ± 0.04 indicating a strong component of pure shear. The similarity of the geometry of structures in the PSZ and the granites demonstrates that the deformation of the two units is broadly synchronous and the deformation in both the units is transpressional.     

Transcrystalline shear fracturing and pseudotachylite generation in a meta-anorthosite (Harris, Scotland)

The meta-anorthosite is locally deformed by brittle shear fracturing, which progressively increases from isolated fractures with little cataclasite to many generations of closely spaced fractures, the intervening rock being highly deformed, in both a plastic and brittle way. In most cases an E-W compression on gently dipping to steep reverse shear planes occurs, which we relate to a Caledonian thrust zone.In places, the highly deformed rock is cut by pseudotachylite veins, which locally form networks. The pseudotachylite is generally intrusive, but does not appear to be related to movement on major slip surfaces. Very locally it may have formed in situ. Pseudotachylite only occurs in highly deformed rock, is only very occasionally deformed itself and, thus, generally represents at each locality the last stage of a complex deformation history, as if its presence welded the rock and prevented further deformation. These striking differences from the country-rock gneisses (in which pseudotachylite occurs on well developed fractures in very slightly deformed rock) are considered to be due to the low anisotropy of the meta-anorthosite, to its lower shear strength and to the easy propagation and branching of the shear fractures in plagioclase. The source of the heat necessary to generate the pseudotachylite melt is not clear—it may come from crack propagation as well as frictional sliding.     

Ductile crust exhumation and extensional detachments in the central Aegean (Cyclades and Evvia Islands).

Abstract

The Aegean continental domain is known to be the site of widespread “back-arc” extension since at least 13 Ma, on the basis of seismotectonic, stratigraphic and fault analysis studies. This extension is documented to overprint structures related to the Mesozoic-Cenozoic Hellenic orogeny. Features attributed to early thrusting include the overall ductile deformation within two broad belts that have suffered HP/LT metamorphism across the Aegean. This study presents a structural analysis of the central Aegean area (Cyclades and Evvia Islands), examining in particular the relationship between ductile and brittle deformation, both in the field and on a regional scale. Extension appears to be responsible for most of the ductile deformation within HP rock units that have experienced penetrative greenschist facies and higher grade metamorphic over-printing. On each studied island, progressive extensional deformation has occurred through the development of a major normal-sense detachment zone down to depths of about 18-25 km. Large displacement along the detachment zone accounts for rapid cooling and exhumation of ductile lower crust to form a local metamorphic dome or core complex. Structural and stratigraphic features support a progressive migration of normal faulting away from the dome axis, and a rotation of previously active faults toward low dips, as in kinematic models recently suggested for the development of extensional detachment systems. All the studied domes, except that seen on los Island, show a dominant top-to-the north or north-east sense of shear, while on the southern flank of many of them, an opposite sense of shear is observed, displaying the same progressive evolution from ductile to brittle rock behaviour. This opposite sense of shear is thought not to result from shearing along a major conjugate detachment zone, as in some recent models, but from the accommodation in the ductile crust of upward bending of the brittle upper crust in the footwall of the north-dipping detachment. Available radiometric and stratigraphie data indicate an early minimum age (22-19 Ma) for the onset of extension. The relationship between early metamorphic domes and shallow-dipping detachments, on one hand, and Messinian-Quaternary steep normal faults and grabens, on the other hand, is best explained with the progressive and continuous development of new normal faults away from the domes axes, rather than with a two-stage evolutionary model (core-complex stage, then Basin-and-Range stage) of the type invoked for the North American Cordillera.     

胶东地区控矿剪切带脆性变形时代的Ar-Ar年代学及其对成矿的制约

胶东地区是典型的剪切带型金矿集中区,精确厘定该地区控矿剪切带的活动时代,可为探讨剪切带与金矿成因关系提供关键的时限约束,并且对矿床成矿模式的建立具有至关重要的意义。大量矿床地质证据显示胶东地区控矿剪切带中脆性变形活动对金矿体的形成具有直接影响,但其脆性变形时代尚不十分清楚。据此,本文在详细研究金矿体赋存特征的基础上,系统选取胶东焦家、玲珑、邓格庄、乳山这四个金矿区控矿剪切带断层泥中白云母进行⁴⁰Ar-³⁹Ar年代学研究。定年结果显示,胶东地区焦家剪切带、招平剪切带以及牟乳剪切带的脆性变形时代分别为110.3±1.5Ma、122.8±1.7Ma、119.6±1.2Ma~115.8±1.4Ma。其中焦家剪切带的脆性变形时代明显晚于招平和牟乳剪切带,可能代表了焦家蚀变岩型矿化形成后易遭受后期的构造叠加。综合胶东各金矿区控矿剪切带变形时代、岩体侵位时代、成矿时代及剪切带活动特征和矿体产出特征,本文认为在多期岩体侵位以及控矿剪切带递进变形过程中,剪切带韧性变形区中由高压流体作用产生的同期脆性破裂可形成脉型矿化,如乳山金矿;而在脆-韧性和脆性变形区中发生的大规模脆性变形可导致脉型和蚀变岩型矿化的形成,如玲珑、邓格庄和焦家金矿。但随着剪切带的递进变形和隆升剥蚀,后期多期次的脆性构造变形叠加,可导致多种矿化类型出现在同一构造部位,如焦家金矿中石英脉型和蚀变岩型矿化。

     

Strain distribution within a km-scale,mid-crustal shear zone: The Kuckaus Mylonite Zone,Namibia

The subvertical Kuckaus Mylonite Zone (KMZ) is a km-wide, crustal-scale, Proterozoic, dextral strike-slip shear zone in the Aus granulite terrain, SW Namibia. The KMZ was active under retrograde, amphibolite to greenschist facies conditions, and deformed felsic (and minor mafic) gneisses which had previously experienced granulite facies metamorphism during the Namaqua Orogeny. Lenses of pre- to syn-tectonic leucogranite bodies are also deformed in the shear zone. Pre-KMZ deformation (D₁) is preserved as moderately dipping gneissic foliations and tightly folded migmatitic layering. Shear strain within the KMZ is heterogeneous, and the shear zone comprises anastomosing high strain ultramylonite zones wrapping around less deformed to nearly undeformed lozenges. Strain is localized along the edge of leucogranites and between gneissic lozenges preserving D₁ migmatitic foliations. Strain localization appears controlled by pre-existing foliations, grain size, and compositional anisotropy between leucogranite and granulite. The local presence of retrograde minerals indicate that fluid infiltration occurred in places, but most ultramylonite in the KMZ is free of retrograde minerals. In particular, rock composition and D₁ fabric heterogeneity are highlighted as major contributors to the strain distribution in time and space, with deformation localization along planes of rheological contrast and along pre-existing foliations. Therefore, the spatial distribution of strain in crustal-scale ductile shear zones may be highly dependent on lithology and the orientation of pre-existing fabric elements. In addition, foliation development and grain size reduction in high strain zones further localizes strain during progressive shear, maintaining the anastomosing shear zone network established by the pre-existing heterogeneity.     

Superposed deformations in the Eastern Alps: strain analysis and microfabrics

Superposition, mainly of two Eoalpine (Cretaceous) deformation events, can be observed in vertical sections and horizontal traverses throughout a decollement zone in the Eastern Alps consisting of crystalline basement and autochthonous and allochthonous cover stacked in several nappes. The first event is an episode with a non-coaxial strain history caused by W-directed thrusting, the second a N-directed shortening by folding and fold imbrication. Strain analysis based both on deformed pebbles and on the preferred orientation of phyllosilicate grains (March theory), microfabric analysis, and observations of the relative timing of deformation and metamorphism, together indicate that the superposition of structures caused by the two events amounts to one continuous, progressive act of deformation. We attribute gradual and consistent variations in intensity and axial ratio of the tectonic strain to a history influenced by: (a) the position of samples in the pile; (b) the relative importance of the strain increments caused by the two events; and (c) rock ductility. We interpret variations of the c-axis fabrics of quartz in the same way, and draw tentative kinematic conclusions for the Eoalpine orogeny in the Eastern Alps.     

Lack of porphyroblast rotation in the Otago schists, New Zealand: implications for crenulation cleavage development, folding and deformation partitioning

Porphyroblasts of garnet and plagioclase in the Otago schists have not rotated relative to geographic coordinates during non-coaxial deformation that post-dates their growth. Inclusion trails in most of the porphyroblasts are oriented near-vertical and near-horizontal, and the strike of near-vertical inclusion trails is consistent over 3000 km². Microstructural relationships indicate that the porphyroblasts grew in zones of progressive shortening strain, and that the sense of shear affecting the geometry of porphyroblast inclusion trails on the long limbs of folds is the same as the bulk sense of displacement of fold closures. This is contrary to the sense of shear inferred when porphyroblasts are interpreted as having rotated during folding.
Several crenulation cleavage/fold models have previously been developed to accommodate the apparent sense of rotation of porphyroblasts that grew during folding. In the light of accumulating evidence that porphyroblasts do not generally rotate, the applicability of these models to deformed rocks is questionable.
Whether or not porphyroblasts rotate depends on how deformation is partitioned. Lack of rotation requires that progressive shearing strain (rotational deformation) be partitioned around rigid heterogeneities, such as porphyroblasts, which occupy zones of progressive shortening or no strain (non-rotational deformation). Therefore, processes operating at the porphyroblast/matrix boundary are important considerations. Five qualitative models are presented that accommodate stress and strain energy at the boundary without rotating the porphyroblast: (a) a thin layer of fluid at the porphyroblast boundary; (2) grain-boundary sliding; (3) a locked porphyroblast/matrix boundary; (4) dissolution at the porphyroblast/matrix boundary, and (5) an ellipsoidal porphyroblast/shadow unit.     

Theoretical and natural strain patterns in ductile simple shear zones

A simple empirical model representing the variation of shear strain throughout a simple shear zone allows us to determine the evolution of finite strain as well as the progressive shape changes of passive markers. Theoretical strain patterns (intensity and orientation of finite strain trajectories, deformed shapes of initially planar, equidimensional and non-equidimensional passive markers) compare remarkably well with patterns observed in natural and experimental zones of ductile simple shear (intensity and orientation of schistosity, shape changes of markers, foliation developed by deformation of markers).The deformed shapes of initially equidimensional and non-equidimensional passive markers is controlled by a coefficient P, the product of

1. (1) the ratio between marker size and shear zone thickness

2. (2) the shear gradient across the zone.

For small values of P (approximately P < 2), the original markers change nearly into ellipses, while large values of P lead to “ retort” shaped markers.This theoretical study also allows us to predict, throughout a simple shear zone, various relationships between the principal finite strain trajectory, planar passive markers and foliations developed by deformation of initially equidimensional passive markers.     

The role of fluids in partitioning brittle deformation and ductile creep in auriferous shear zones between 500 and 700 °C

The fabric, mineralogy, geochemistry, and stable isotope systematics of auriferous shear zones in various hydrothermal gold deposits were studied in order to discuss the role of fluids in rock deformation at temperatures between 500 °C and 700 °C. The strong hydrothermal alteration and gold mineralization indicates that effective permeability development goes ahead with high-temperature rock deformation. The economic gold enrichment is often hosted by breccias and quartz veins in the ductile shear zones, which either formed at fast strain rates or by low strain continuous deformation at slow strain rates. Both processes require (1) a close-to lithostatic to supralithostatic fluid pressure and/or (2) a strong rheology contrast of the deformed lithologies that is often developed during progressive hydrothermal alteration. Compartments of high fluid pressure are sealed from the rest of the shear zones by high-temperature deformation mechanisms, e.g. intracrystalline plasticity and diffusion creep, and compaction. In contrast, in mylonites with heterogeneous crystal plastic and brittle deformation mechanisms for the various minerals, an interconnected network of a grain-scale porosity forms an effective fluid conduit, which hampers fluid pressure build-up and the formation of veins.The auriferous shear zones of the various gold mines represent fluid conduits in the deeper crust, 100 m along strike and up to 1000 m down-dip. The hydrothermal fluids infiltrated may be responsible for low magnitude earthquakes in the Earth's lower crust, which otherwise deforms viscously.     

部分熔融与高级变质岩流变机制——以内蒙古大青山高级变质岩为例

部分熔融作用与高级变质岩变形作用是相互制约,变形作用能够提高岩石部分熔融程度,降低熔融温度。熔体存在影响和制约岩石强度和变形机制。大青山高级岩经历了下部地壳构造层次变质变形和深熔作用改造,形成了复杂构造要素组合。宏观与微观构造特点表明:高级变质岩变形机制主要为熔体增强颗粒边界扩散和颗粒流动,使岩石发生大规模的塑性流动。在宏观上形成了不对称流动组构、熔融线理、岩石和矿物条带、层内底辟褶皱和大型穹窿构造。但是,在微观上矿物颗粒变形不明显,晶内变形组构不发育,表现为三边平衡结构,与静态结晶变质岩结构相似,形成了地壳深部构造层次上变质构造岩-构造片麻岩。     

Progressive development of s-type flanking folds in simple shear

Flanking structures are deflections of planar or linear fabric elements in a rock alongside a crosscutting element (CE), e.g. a vein or fault. This study provides new results from analogue experiments, which test and extend recent numerical models of flanking structures. A linear viscous matrix material (PDMS) was deformed in a ring shear rig that allows continuous observation to large values of shear strain. Rotational behaviour, offset and deflection of marker lines around a predefined, lubricated CE were monitored for different initial orientations of the fault with respect to the shear zone boundary, and the results were compared with numerical results and natural examples. At high initial angles to the shear zone boundary (>135°), a structure previously described as an ‘s-type flanking fold’ develops. During progressive deformation, an initially straight marker line passing through the centre of the CE is offset in a sense synthetic with the bulk sense of shear and shows a shortening displacement across the CE. Simultaneously, this central marker line is deflected and forms symmetrical folds, which are convex in the direction of shear along the CE (i.e. normal drag). Both offset and deflection of the marker lines decrease towards the tips of the fault. Natural examples of s-type flanking folds, directly comparable with the model results, are more common than is generally appreciated.     

Pile reinforcement mechanism of soil slopes

Stabilizing piles are widely used as an effective and economic reinforcement approach for slopes. Reasonable designs of pile reinforcement depend on the understanding of reinforcement mechanism of slopes. A series of centrifuge model tests were conducted on the pile-reinforced slopes and corresponding unreinforced slopes under self-weight and vertical loading conditions. The deformation of the slope was measured using image-based analysis and employed to investigate the pile reinforcement mechanism. The test results showed that the piles significantly reduced the deformation and changed the deformation distribution of the slope, and prevented the failure occurred in the unreinforced slope. The pile influence zone was determined according to the inflection points on the distribution curves of horizontal displacement, which comprehensively described the features of the pile–slope interaction and the characteristics of reinforced slopes. The concepts of anti-shear effect and compression effect were proposed to quantitatively describe the restriction features of the piles on the deformation of the slope, namely the reduction in the shear deformation and the increase in the compression deformation, respectively. The pile reinforcement effect mainly occurred in the pile influence zone and decreased with increasing distance from the piles. There was a dominated compression effect in the vicinities of the piles. The compression effect developed upwards in the slope with a transmission to the anti-shear effect. The anti-shear effect became significantly dominated near the slip surface and prevented the failure that occurred in the unreinforced slope.     

Pure shear to simple shear-dominated transpression during the Eburnean major D2 deformation,Daléma sedimentary basin,eastern Senegal

Field studies in the Palaeoproterozoïc Daléma basin, Kédougou-Kéniéba Inlier, reveal that the main tectonic feature comprises alternating large shear zones relatively well-separated by weakly deformed surrounding rock domains. Analysis of the various structures in relation to this major D₂ phase of Eburnean deformation indicates partitioning of sinistral transpressive deformation between domains of dominant transcurrent and dominant compressive deformation. Foliation is mostly oblique to subvertical and trending 0–30° N, but locally is subhorizontal in some thrust-motion shear zones. Foliation planes of shear zones contain a superimposed subhorizontal stretching lineation which in places cross-cuts a steeply plunging stretching lineation which is clearly expressed in the metasedimentary rocks of weakly deformed surrounding domains. In the weakly deformed domains, the subhorizontal lineation is absent, whereas the oblique to subvertical lineation is more fully developed. Finite strain analyses of samples from surrounding both weakly deformed and shearing domains, using finite strain ratio and the Fry method, indicate flattened ellipsoid fabrics. However, the orientation of the long axis (X) of the finite strain ellipsoid is horizontal in the shear zones and oblique within the weakly deformed domains. Exceptionally, samples from some thrust zones indicate a finite strain ellipsoid in triaxial constriction fabrics with a subhorizontal long axis (X). In addition, the analysis of the strain orientation starting from semi-ductile and brittle structures indicates that a WNE–ESE (130° N to 110° N) orientation of strain shortening axis occurred during the Eburnean D₂ deformation.     

江苏东海CCSD主孔超高压变形与折返变形的叠加关系

位于苏鲁超高压变质地体南部的中国大陆科学钻探工程（CCSD）主孔岩石经历了超高压变形及多期折返变形。第一期折返变形为伸展折返变形,榴辉岩发生角闪岩相退变质作用,没有新生面理或线理的发育,基本保留了超高压阶段的S-L组构,并有显示熔融体特征的强退变榴辉岩发育。第二期折返变形为SEE-NWW向挤压折返变形,超高压变形期形成的不同岩石类型在本期变形中表现出不同的叠加变形现象,榴辉岩类岩石早期形成的S倾面理主体部分转为SEE倾,但拉伸线理产状与超高压变形期的近SN走向基本一致,反映早期面理沿NNE轴向的重褶作用,局部又被向SEE缓倾的韧性剪切带切割;而片麻岩类岩石在超高压变形期形成的S-L组构的主体部分已被新生成的总体向SEE缓倾的S-L组构置换,反映早期面理不仅重褶,而且大部分再度发生韧性剪切变形,具SEE向NWW的逆冲剪切指向,矿物普遍重新定向。第三期折返变形发育具NWW向SEE正滑剪切指向的韧性剪切带,并伴随大量“Z”型褶皱构造的发育。第四期折返变形以NWW向SEE正滑的张性或张扭性脆性断裂活动为主。探讨了苏鲁超高压变质地体折返变形的力学机制及CCSD主孔岩石面理变化的形成机制。