Source and supply of sediment to a shoreline salient in a fringing reef environment

Reef-associated landforms are coupled to the health of the reef ecosystem which produces the sediment that forms and maintains these landforms. However, this connection can make reef-fronted coastlines sensitive to the impacts of climate change, given that any decline in ecosystem health (e.g. decreasing sediment supply) or changes to physical processes (e.g. sea level rise, increasing wave energy) could drive the sediment budgets of these systems into a net erosive state. Therefore, knowledge of both the sediment sources and transport mechanisms is required to predict the sensitivity of reef-associated landforms to future climate change. Here, we examine the benthic habitat composition, sediment characteristics (composition, texture, and age), and transport mechanisms and pathways to understand the interconnections between coastal morphology and the reef system at Tantabiddi, Ningaloo Reef, Western Australia. Benthic surveys and sediment composition analysis revealed that although live coral accounts for less than 5% of the benthic cover, coral is the dominant sediment constituent (34% on average). Sediment ages (²³⁸U/²³⁰Th) were mostly found to be thousands of years old, suggesting that the primary sediment source is relic reef material (e.g. Holocene reef framework). Sediment transport across the lagoon was quantified through measurements of ripple migration rates, which were found to be shoreward migrating and responsible for feeding the large shoreline salient in the lee of the reef. The derived sediment fluxes were comparable with previously measured rates of sediment production by bioerosion. These results suggest that sediment budgets of systems dependent on old (>10³ years) source materials may be more resilient to climate change as present-day reef health and community composition (i.e. sources of ‘new’ carbonate production) have limited influence on sediment supply. Therefore, the vulnerability of reef-associated landforms in these systems will be dictated by future changes to mechanisms of sediment generation (e.g. bioerosion) and/or physical processes. © 2018 John Wiley & Sons, Ltd.     

A meta‐analysis of reef island response to environmental change on the Great Barrier Reef

Reef islands on the Great Barrier Reef are influenced by a range of environmental factors. A meta‐analysis of 103 islands is presented to express variation in island size (area and volume) as a function of latitudinal and cross shelf gradients in regional oceanographic factors (exposure to incident waves, tidal range and tropical cyclone frequency) and local physical factors (position on the shelf, area, length and depth of supporting reef platform, vegetative cover). Models performed well for unvegetated sandcays (R² = 0.89), vegetated sandcays (R² = 0·72) and low wooded islands (R² = 0.78), with a moderate level of variation explained when all islands were simultaneously regressed (R² = 0.58). Future island dynamics were simulated for anticipated changes in cyclone regime, wave activity and sea level. For 38 islands mapped on the 1973 Royal Society and Universities of Queensland Expedition to the Northern Great Barrier Reef, change over the same 22 year period (1973–1995) was determined and the relative magnitude of observed and modelled changes was compared and found to be consistent through rank correlation analysis (Γ = 0.84 for unvegetated sandcays, Γ = 0.81 for vegetated sandcays). Simulations of island area or volume change from 2000 to 2100 indicated that under a 30% decrease in tropical cyclone activity, unvegetated sandcays continue to accrete at a lower rate, whereas all island types erode under a 38% increase in tropical cyclone activity. Vegetated sandcays initially accrete at higher levels of cyclone activity, entering an erosive state with a 60% increase in activity. Low wooded islands are unresponsive to environmental changes modelled. A sensitivity analysis of vegetated and unvegetated sandcays indicated that the presence of vegetation increases the tropical cyclone activity threshold at which islands begin to erode. Greatest sedimentary losses occur within the central band of high cyclone activity between Cooktown and Mackay. Copyright © 2015 John Wiley & Sons, Ltd.     

Runoff and sediment generation on bench‐terraced hillsides: measurements and up‐scaling of a field‐based model

Despite widespread bench‐terracing, stream sediment yields from agricultural hillsides in upland West Java remain high. We studied the causes of this lack of effect by combining measurements at different spatial scales using an erosion process model. Event runoff and sediment yield from two 4‐ha terraced hillside subcatchments were measured and field surveys of land use, bench‐terrace geometry and storage of sediment in the drainage network were conducted for two consecutive years. Runoff was 3·0–3·9% of rainfall and sediment yield was 11–30 t ha⁻¹ yr⁻¹ for different years, subcatchments and calculation techniques. Sediment storage changes in the subcatchment drainage network were less than 2 t ha⁻¹, whereas an additional 0·3–1·5 t ha⁻¹ was stored in the gully between the subcatchment flumes and the main stream. This suggests mean annual sediment delivery ratios of 86–125%, or 80–104% if this additional storage is included. The Terrace Erosion and Sediment Transport (TEST) model developed and validated for the studied environment was parameterized using erosion plot studies, land use surveys and digital terrain analysis to simulate runoff and sediment generation on the terraced hillsides. This resulted in over‐estimates of runoff and under‐estimates of runoff sediment concentration. Relatively poor model performance was attributed to sample bias in the six erosion plots used for model calibration and unaccounted covariance between important terrain attributes such as slope, infiltration capacity, soil conservation works and vegetation cover. Copyright © 2005 John Wiley & Sons, Ltd.     

Gully‐head erosion processes on a semi‐arid valley floor in Kenya: a case study into temporal variation and sediment budgeting

A three year monitoring programme of gully‐head retreat was established to assess the significance of sediment production in a drainage network that expanded rapidly by gully‐head erosion on the low‐angled alluvio‐lacustrine Njemps Flats in semi‐arid Baringo District, Kenya. This paper discusses the factors controlling the large observed spatial and temporal variation in gully‐head retreat rates, ranging from 0 to 15 m a^?1. The selected gullies differed in planform and in runoff‐contributing catchment area but soil material and land use were similar. The data were analysed at event and annual timescales. The results show that at annual timescale rainfall amount appears to be a good indicator of gully‐head retreat, while at storm‐event timescale rainfall distribution has to be taken into account. A model is proposed, including only rainfall (P) and the number of dry days (DD) between storms: which explains 56 per cent of the variation in retreat rate of the single‐headed gully of Lam1. A detailed sediment budget has been established for Lam1 and its runoff‐contributing area (RCA). By measuring sediment input from the RCA, the sediment output by channelized flow and linear retreat of the gully head for nine storms, it can be seen that erosion shifts between different components of the budget depending on the duration of the dry period (DD) between storms. Sediment input from the RCA was usually the largest component for the smaller storms. The erosion of the gully head occurred as a direct effect of runoff falling over the edge (GH_waterfall) and of the indirect destabilization of the adjacent walls by the waterfall erosion and by saturation (GH_mass/storage). The latter component (GH_mass/storage) was usually much larger that the former (GH_waterfall). The sediment output from the gully was strongly related to the runoff volume while the linear retreat, because of its complex behaviour, was not. Overall, the results show that the annual retreat is the optimal timescale to predict retreat patterns. More detailed knowledge about relevant processes and interactions is necessary if gully‐head erosion is to be included in event‐based soil erosion models. Copyright © 2001 John Wiley & Sons, Ltd.     

Stereophotogrammetry of archive data and topographic approaches to debris‐flow torrent measurements: calculation of channel‐sediment states and a partial sediment budget for Manival torrent (Isère,France)

This paper focuses on a topographic methodology to characterize the amount of sediment stored in channels and the use of historical photographs for aerial survey by stereophotogrammetry, as part of wider research on debris‐flow magnitude prediction. The topographic methodology uses equidistant four‐point cross‐sections along the long profile of the channel. Each cross‐section is representative of a 50‐m reach of the channel. To calculate the volume of each reach, the difference is calculated between a reference level and the topographic surface. The reference level is the lowest level where the debris flow can erode, and in the current method this level is estimated from fixed points along the long profile of the channel. The accuracy of the method has been estimated by comparing results of a detailed topographic survey, with a standard deviation corresponding to about 6 per cent of the total calculated sediment volume. This topographic methodology has been used on aerial photographs by photogrammetry. This tool was applied to photographs taken on 12 past dates. The scales of the archive photographs used range from 1:3000 to 1:30 000, but results are consistent and permit us to calculate sediment states of the channel for different past dates with an uncertainty of about 6 per cent of the total volume. The application of the technique to the Manival debris‐flow torrent has permitted us to propose some partial sediment budgets and erosion‐rate estimates. Copyright © 2006 John Wiley & Sons, Ltd.     

Delayed delivery from the sediment factory: modeling the impact of catchment response time to tectonics on sediment flux and fluvio‐deltaic stratigraphy

The sediment flux from a catchment is driven by tectonics and climate but is moderated by the geomorphic response of the landscape system to changes in these two boundary conditions. Consequently, catchment response time and the non‐linear behavior of landscapes in response to boundary condition change control the downstream propagation of climatic or tectonic perturbations from catchments to neighboring basins. In order to investigate the impact of catchment response time on sediment flux, we integrated a spatially‐lumped numerical model PaCMod, with new routines simulating the evolution of landscape morphology and erosion rates under tectonic and climatic forcing. We subsequently applied the model to reconstruct the sediment flux from a tectonically perturbed catchment in central Italy. Finally, we coupled our model to DeltaSim, a process‐response model simulating fluvio‐deltaic stratigraphy, and investigated the impact of catchment response time on stratigraphy, using both synthetic scenarios and a real world system (Fucino Basin, central Italy). Our results demonstrate that the differential response of geomorphic elements to tectonic and climatic changes induces a complex sediment flux signal, and produces characteristic stratigraphic architectures and shoreline trajectories. Copyright © 2014 John Wiley & Sons, Ltd.     

Large‐scale sediment bodies and superimposed bedforms on the continental shelf close to the Strait of Gibraltar: interplay of complex oceanographic conditions and physiographic constraints

A previously unknown field of large‐scale sedimentary bodies has been mapped and studied on the continental shelf off the Cape Trafalgar near the Strait of Gibraltar with particular emphasis on the relationship between large‐scale sediment bodies and the superimposed bedforms. This study is based on a grid of 975 km of high‐resolution seismic profiles collected at water depths ranging between 15 and 60 m. High variability of large‐scale sedimentary bodies is attributed to the complex interaction of hydrodynamic agents. The most prominent sedimentary features are sand banks and ridges that indicate long‐term southwest and southward‐directed sediment transport patterns, possibly due to the interplay of two dominant current systems flowing southward and westward. These sediment bodies evolve laterally to distinct external geometries, such as sand shoals in shallow water and sand sheets in the vicinity of larger sand banks that indicate moderate current velocities. In addition, pre‐existing physiography is considered to play a role in the generation of certain sediment bodies, developed over inclined surfaces or confined laterally by elevations. Relationships between superimposed bedforms (mostly very large dunes) and underlying sediment bodies vary across the study area. Most superimposed bedforms occur over the complex mosaic of sediment banks and sheets, suggesting the interaction of several high‐energy currents with different directions, such as tidal and/or wind‐driven currents. Copyright © 2010 John Wiley & Sons, Ltd.     

The influence of Pacific salmon decay products on near‐field streambed sediment and organic matter dynamics: a flume simulation

Pacific salmon are biogeomorphic agents shown to induce positive feedbacks on their natal watersheds. However, the literature documenting their ecological effects on in‐stream natal environments is more divisive. The disturbance salmon create during redd construction has the potential to reduce stream productivity. The pulse of salmon organic matter (SOM) and marine derived nutrients (MDNs) released during carcass decay has been reported as either stimulating in‐stream productivity or having no local effect. To evaluate the ecological costs and benefits of salmon spawning events, MDN delivery and storage processes need to be identified and quantified. A simulation was conducted in three flow‐through flumes (2 m × 2 m × 30 m) over a 33‐day period (consisting of 15 baseline, four MDN exposure, and 14 post‐exposure days) to assess near‐field sediment and organic matter dynamics during active and post‐spawn simulations. The objective of the study was to measure changes in the amounts and particle sizes of suspended and gravel‐stored fine sediment, in order to elucidate the process and significance of SOM recruitment to the gravel bed via sedimentation. Gravel beds in all flumes were enriched with SOM following treatments but the response was highest in the active spawn simulation. The more effective delivery in the active spawn simulation was attributed to its higher inorganic sediment concentration, which is known to enhance floc formation. Although the active spawn simulation delivered more SOM to the gravel bed, the post‐spawn phase may be equally important to natural streams because its decay phase is longer than the active spawn and consequently can provide SOM to the streambed as long as carcasses remain in‐stream. The delivery, and potential retention, of SOM to spawning streambeds and the intergravel environment may be particularly important for interior streams, which experience low flow conditions during the spawning phase and accordingly have the potential for hyporheic nutrient recruitment and storage. Copyright © 2014 John Wiley & Sons, Ltd.