Development of damage probability matrices based on Greek earthquake damage data

A comprehensive study is presented for empirical seismic vulnerability assessment of typical structural types, representative of the building stock of Southern Europe, based on a large set of damage statistics. The observational database was obtained from post-earthquake surveys carried out in the area struck by the September 7, 1999 Athens earthquake. After analysis of the collected observational data, a unified damage database has been created which comprises 180,945 damaged buildings from/after the near-field area of the earthquake. The damaged buildings are classified in specific structural types, according to the materials, seismic codes and construction techniques in Southern Europe. The seismic demand is described in terms of both the regional macroseismic intensity and the ratio αg/ao, where αg is the maximum peak ground acceleration (PGA) of the earthquake event and ao is the unique value PGA that characterizes each municipality shown on the Greek hazard map. The relative and cumulative frequencies of the different damage states for each structural type and each intensity level are computed in terms of damage ratio. Damage probability matrices (DPMs) and vulnerability curves are obtained for specific structural types. A comparison analysis is fulfilled between the produced and the existing vulnerability models.     

Development of fragility functions as a damage classification/prediction method for steel moment‐resisting frames using a wavelet‐based damage sensitive feature

Fragility functions are commonly used in performance‐based earthquake engineering for predicting the damage state of a structure subjected to an earthquake. This process often involves estimating the structural damage as a function of structural response, such as the story drift ratio and the peak floor absolute acceleration. In this paper, a new framework is proposed to develop fragility functions to be used as a damage classification/prediction method for steel structures based on a wavelet‐based damage sensitive feature (DSF). DSFs are often used in structural health monitoring as an indicator of the damage state of the structure, and they are easily estimated from recorded structural responses. The proposed framework for damage classification of steel structures subjected to earthquakes is demonstrated and validated with a set of numerically simulated data for a four‐story steel moment‐resisting frame designed based on current seismic provisions. It is shown that the damage state of the frame is predicted with less variance using the fragility functions derived from the wavelet‐based DSF than it is with fragility functions derived from an alternate acceleration‐based measure, the spectral acceleration at the first mode period of the structure. Therefore, the fragility functions derived from the wavelet‐based DSF can be used as a probabilistic damage classification model in the field of structural health monitoring and an alternative damage prediction model in the field of performance‐based earthquake engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance-based methodology for assessing seismic vulnerability and capacity of buildings

This paper presents a performance-based methodology for the assessment of seismic vulnerability and capacity of buildings. The vulnerability assessment methodology is based on the HAZUS methodology and the improved capacity- demand-diagram method. The spectral displacement (Sd) of performance points on a capacity curve is used to estimate the damage level of a building. The relationship between Sd and peak ground acceleration (PGA) is established, and then a new vulnerability function is expressed in terms of PGA. Furthermore, the expected value of the seismic capacity index (SCev) is provided to estimate the seismic capacity of buildings based on the probability distribution of damage levels and the corresponding seismic capacity index. The results indicate that the proposed vulnerability methodology is able to assess seismic damage of a large number of building stock directly and quickly following an earthquake. The SCev provides an effective index to measure the seismic capacity of buildings and illustrate the relationship between the seismic capacity of buildings and seismic action. The estimated result is compared with damage surveys of the cities of Dujiangyan and Jiangyou in the M8.0 Wenchuan earthquake, revealing that the methodology is acceptable for seismic risk assessment and decision making. The primary reasons for discrepancies between the estimated results and the damage surveys are discussed.     

Analytical investigation of the observed damage in an RC building after March 08, 2010 Kovancilar-Turkey earthquake

Although the M _w  = 6.1 Kovancilar-Turkey earthquake of March 8, 2010 had a moderate intensity with a recorded PGA of 0.07g, it caused heavy damages in 2870 residential buildings having traditional or masonry structural systems and 42 human loss. Damage has been reported to be particularly concentrated at Kovancilar and Palu counties of Elazig province. Five hours after this earthquake, an aftershock of M _L  = 5.6 with a PGA of 0.08g struck the same region, developing the existing damages in the structures. In order to investigate this significant amount of reported damages under the effect of such low ground shakings, our reconnaissance team arrived at the region and unexpectedly came across a two-story RC building settled on a slope in Yukari Demirci village, which suffered moderate damage during the shakes. The outline of this paper can be summarized as the presentation of the results of the investigations in the order of describing the overall observed damages within the region; evaluation of the recorded motions; the details of the field-work carried out for the two story RC building and the analytical estimation of the site-assessed damages by means of nonlinear dynamic analysis. Employing the gathered data, the building is analytically modeled as plane frames and analyses are performed under the effects of the processed earthquake records, which are applied to the structure one after another in the consistent directions due to the building location. It is shown herein that the structural elements remain in the elastic range subjected to the processed recorded motions; henceforth acceleration time histories are scaled step by step up to 0.40g and computations are repeated for each acceleration level. Comparison with the observed and the analytically obtained damages confirmed that approximately 0.30g of peak ground acceleration should have to be exposed during the earthquakes.     

Evidence for fault-related directionality and localized site effects from strong motion recordings of the 2003 Boumerdes (Algeria) earthquake: Consequences on damage distribution and the Algerian seismic code

The Algiers–Boumerdes region has been struck by a destructive magnitude 6.8 (M_w) earthquake on May 21, 2003. The study presented in this paper is based on main shock strong motions from 13 stations of the Algerian accelerograph network. A maximum 0.58g peak ground acceleration (PGA) has been recorded at 20 km from the epicenter, only about 150 m away from a PGA of 0.34g, with both a central frequency around 5 Hz, explained by a strong very localized site effect, confirmed by receiver function technique results showing peaks at 5 Hz with amplitudes changing by a factor of 2. Soil amplifications are also evidenced at stations located in the quaternary Mitidja basin, explaining the higher PGA values recorded at these stations than at stations located on firm soil at similar distances from the epicenter. A fault-related directionality effect observed on the strong motion records and confirmed by the study of the seismic movement anisotropy, in agreement with the N65 fault plan direction, explains the SW–NE orientation of the main damage zone. In the near field, strong motions present a high-frequency content starting at 3 Hz with a central frequency around 8 Hz, while in the far field their central frequency is around 3 Hz, explaining the high level of damage in the 3- to 4-story buildings in the epicentral zone. The design spectra overestimate the recorded mean response spectra, and its high corner frequency is less than the recorded one, leading to a re-examination of the seismic design code that should definitively integrate site-related coefficient, to account for the up to now neglected site amplification, as well as a re-modeling of the actual design spectra. Finally, both the proposed Algerian attenuation law and the worldwide laws usually used in Algeria underestimate the recorded accelerations of the 6.8 (M_w) Boumerdes earthquake, clearly showing that it is not possible to extrapolate the proposed Algerian law to major earthquakes.     

Seismic vulnerability assessment to slight damage based on experimental modal parameters

The aim of this paper is to adjust behaviour models for each class of structure for vulnerability assessment by using ambient vibration. A simple model based on frequencies, mode shapes and damping, taken from ambient vibrations, allows computation of the response of the structures and comparison of inter‐storey drifts with the limits found in the literature for the slight damage grade, considered here as the limit of elastic behaviour. Two complete methodologies for building fragility curves are proposed: (1) using a multi‐degree of freedom system including higher modes and full seismic ground‐motion and (2) using a single‐degree of freedom model considering the fundamental mode f₀ of the structure and ground‐motion displacement response spectra S_D(f₀). These two methods were applied to the city of Grenoble, where 60 buildings were studied. Fragility curves for slight damage were derived for the various masonry and reinforced concrete classes of buildings. A site‐specific earthquake scenario, taking into account local site conditions, was considered, corresponding to an M_L = 5.5 earthquake at a distance of 15 km. The results show the benefits of using experimental models to reduce variability of the slight damage fragility curve. Moreover, by introducing the experimental modal model of the buildings, it is possible to improve seismic risk assessment at an overall scale (the city) or a local scale (the building) for the first damage grade (slight damage). This level of damage, of great interest for moderate seismic‐prone regions, may contribute to the seismic loss assessment. Copyright © 2011 John Wiley & Sons, Ltd.     

Seismic strengthening of an under‐designed RC structure with FRP

The opportunities provided by the use of fiber‐reinforced polymer (FRP) for the seismic retrofit of existing reinforced concrete (RC) structures were assessed on a full‐scale three‐story framed structure. The structure, designed only for gravity loads, was subjected to a bi‐directional pseudo‐dynamic (PsD) test at peak ground acceleration (PGA) equal to 0.20g at the ELSA Laboratory of the Joint Research Centre. The seismic deficiencies exhibited by the structure after the test were confirmed by post‐test assessment of structural seismic capacity performed by nonlinear static pushover analysis implemented on the lumped plasticity model of the structure. In order to allow the structure to withstand 0.30g PGA seismic actions, a retrofit using glass fiber‐reinforced polymer (GFRP) laminates was designed. The retrofit design was targeted to achieve a more ductile and energy dissipating global performance of the structure by increasing the ductility of columns and preventing brittle failure modes. Design assumptions and criteria along with nonlinear static pushover analysis to assess the overall capacity of the FRP‐retrofitted structure are presented and discussed. After the retrofit execution, a new series of PsD tests at both 0.20g and 0.30g PGA level were carried out. Theoretical predictions are compared with the main experimental outcomes to assess the effectiveness of the proposed retrofit technique and validate the adopted design procedures. Copyright © 2007 John Wiley & Sons, Ltd.     

Performance‐based earthquake engineering assessment of a self‐centering,post‐tensioned concrete bridge system

Highway bridges in highly seismic regions can sustain considerable residual displacements in their columns following large earthquakes. These residual displacements are an important measure of post‐earthquake functionality, and often determine whether or not a bridge remains usable following an earthquake. In this study, a self‐centering system is considered that makes use of unbonded, post‐tensioned steel tendons to provide a restoring force to bridge columns to mitigate the problem of residual displacements. To evaluate the proposed system, a code‐conforming, case‐study bridge structure is analyzed both with conventional reinforced concrete columns and with self‐centering, post‐tensioned columns using a formalized performance‐based earthquake engineering (PBEE) framework. The PBEE analysis allows for a quantitative comparison of the relative performance of the two systems in terms of engineering parameters such as peak drift ratio as well as more readily understood metrics such as expected repair costs and downtime. The self‐centering column system is found to undergo similar peak displacements to the conventional system, but sustains lower residual displacements under large earthquakes, resulting in similar expected repair costs but significantly lower expected downtimes. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of the angle of seismic incidence on the fragility curves of bridges

This study examines the effect of the angle of seismic incidence θ on the fragility curves of bridges. Although currently, fragility curves of bridges are usually expressed only as a function of intensity measure of ground motion (IM) such as peak ground acceleration, peak ground velocity, or S_a(ω₁), in this study they are expressed as a function of IM with θ as a parameter. Lognormal distribution function is used for this purpose with fragility parameters, median c_m and standard deviation ζ to be estimated for each value of θ chosen from 0 < θ < 360°. A nonlinear 3D finite element dynamic analysis is performed, and key response values are calculated as demand on the bridge under a set of acceleration time histories with different IM values representing the seismic hazard in Los Angeles area. This method is applied to typical straight reinforced concrete bridges located in California. The results are validated with existing empirical damage data from the 1994 Northridge earthquake. Even though the sample bridges are regular and symmetric with respect to the longitudinal axis, the results indicate that the weakest direction is neither longitudinal nor transverse. Therefore, if the angle of seismic incidence is not considered, the damageability of a bridge can be underestimated depending on the incidence angle of seismic wave. Because a regional highway transportation network is composed of hundreds or even thousands of bridges, its vulnerability can also be underestimated. Hence, it is prudent to use fragility curves taking the incident angle of seismic waves into consideration as developed here when the seismic performance of a highway network is to be analyzed. Copyright © 2012 John Wiley & Sons, Ltd.     

The 1986 Dharamsala earthquake of Himachal Himalaya – estimates of source parameters,average intrinsic attenuation and site amplification functions

The 26th April 1986 Dharamsala earthquake (m_b 5.5) occurred in the Kangra region of Himachal Himalaya, which lies in the rupture zone of great Kangra earthquake of 1905. This was the first moderate sized earthquake to be recorded at a few sites of the strong ground motion array in the NW Himalaya. The accelerograms of this earthquake have been used to estimate its source parameters, site amplification functions and to estimate the effective shear wave attenuation factor Q_β in the frontal region of Himachal Himalaya. A double couple fault plane solution for the earthquake has been obtained based on the spectra of the transverse component of the accelerograms. The estimated values of the source parameters are seismic moment: 2.1×10²⁴ dyne-cm, static stress drop (Δσ): 36 bars, source radius (r): 2.8 km and moment magnitude (M_w): 5.4. The estimated average values of effective shear wave attenuation factor Q_β for various sites are in the range of 125 to 300 with an overall spatial average of 239. The influence of local site effects on the observed PGA values have been examined on the basis of site amplification functions.     

Probability of actuating a seismic shutoff device

Automatic seismic shutoff devices are used to reduce the risk to gas and liquid distribution systems from earthquakes. In the USA, the gas shutoff devices are tested and certified according to the American Society of Civil Engineers' Standard ASCE 25. During tests, devices are shaken by simple harmonic (sinusoidal) motions of different frequencies and checked for actuation. Because earthquake motions are not sinusoidal, the amplitude of earthquake motions that will actuate these devices is not clearly understood. This paper determines the probability of actuating devices by earthquake motions of different amplitudes. The probability of actuation increases with increase in the resultant peak horizontal ground acceleration (PGA). The probability of actuation is 50% for PGA = 0.23g and 90% for PGA = 0.31g, where g = 9.81 m/s² = acceleration due to gravity. On a ‘stiff soil’ site in San Francisco, CA, the mean recurrence interval of actuation is 51 years. On a similar site in Boston, MA, the mean recurrence interval of actuation is 3000 years. ASCE 25 compliant devices are actuated by high frequencies in ground motions. There is greater uncertainty in the actuation of these devices by ground motions that are damaging to very flexible systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Perturbation of fluvial sediment fluxes following the 2008 Wenchuan earthquake

Quantifying the removal of co‐seismic landslide material after a large‐magnitude earthquake is central to our understanding of geomorphic recovery from seismic events and the topographic evolution of tectonically active mountain ranges. In order to gain more insight into the fluvial erosion response to co‐seismic landslides, we focus on the sediment fluxes of rivers flowing through the rupture zone of the 2008 M_w 7.9 Wenchuan earthquake in the Longmen Shan of the eastern Tibetan Plateau. Over the post‐seismic period of 2008–2013, we annually collected river sediment samples (0.25–1 mm) at 19 locations and measured the concentration of cosmogenic ¹⁰Be in quartz. When compared with published pre‐earthquake data, the ¹⁰Be concentrations declined dramatically after the earthquake at all sampling sites, but with significant spatial differences in the amplitude of this decrease, and were starting to increase toward pre‐earthquake level in several basins over the 5‐year survey. Our analysis shows that the amplitude of ¹⁰Be decrease is controlled by the amount of landslides directly connected to the river network. Calculations based on ¹⁰Be mixing budgets indicate that the sediment flux of the 0.25–1 mm size fraction increased up to sixfold following the Wenchuan earthquake. Our results also suggest that fluvial erosion became supply limited shortly after the earthquake, and predict that it could take a few years to several decades for fluvial sediment fluxes to go back to pre‐earthquake characteristics, depending on catchment properties. We also estimate that it will take at least decades and possibly up to thousands of years to remove the co‐seismic landslide materials from the catchments in the Longmen Shan. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of earthquake ground motions on fragility curves of highway bridge piers based on numerical simulation

Fragility curves express the probability of structural damage due to earthquakes as a function of ground motion indices, e.g., PGA, PGV. Based on the actual damage data of highway bridges from the 1995 Hyogoken‐Nanbu (Kobe) earthquake, a set of empirical fragility curves was constructed. However, the type of structure, structural performance (static and dynamic) and variation of input ground motion were not considered to construct the empirical fragility curves. In this study, an analytical approach was adopted to construct fragility curves for highway bridge piers of specific bridges. A typical bridge structure was considered and its piers were designed according to the seismic design codes in Japan. Using the strong motion records from Japan and the United States, non‐linear dynamic response analyses were performed, and the damage indices for the bridge piers were obtained. Using the damage indices and ground motion indices, fragility curves for the bridge piers were constructed assuming a lognormal distribution. The analytical fragility curves were compared with the empirical ones. The proposed approach may be used in constructing the fragility curves for highway bridge structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Markovian modeling of seismic damage accumulation

Analysis of civil structures at the scale of life‐cycle requires stochastic modeling of degradation. Phenomena causing structures to degrade are typically categorized as aging and point‐in‐time overloads. Earthquake effects are the members of the latter category this study deals with in the framework of performance‐based earthquake engineering (PBEE). The focus is structural seismic reliability, which requires modeling of the stochastic process describing damage progression, because of subsequent events, over time. The presented study explicitly addresses this issue via a Markov‐chain‐based approach, which is able to account for the change in seismic response of damaged structures (i.e. state‐dependent seismic fragility) as well as uncertainty in occurrence and intensity of earthquakes (i.e. seismic hazard). The state‐dependent vulnerability issue arises when the seismic hysteretic response is evolutionary and/or when the damage measure employed is such that the degradation increment probabilistically depends on the conditions of the structure at the time of the shock. The framework set up takes advantage also of the hypotheses of classical probabilistic seismic hazard analysis, allowing to separate the modeling of the process of occurrence of seismic shocks and the effect they produce on the structure. It is also discussed how the reliability assessment, which is in closed‐form, may be virtually extended to describe a generic age‐ and state‐dependent degradation process (e.g. including aging and/or when aftershock risk is of interest). Illustrative applications show the options to calibrate the model and its potential in the context of PBEE. Copyright © 2015 John Wiley & Sons, Ltd.     

Seismic response estimation method for earthquake‐damaged RC buildings

This study proposes a procedure for identifying spectral response curves for earthquake‐damaged areas in developing countries without seismic records. An earthquake‐damaged reinforced concrete building located in Padang, Indonesia was selected to illustrate the identification of the maximum seismic response during the 2009 West Sumatra earthquake. This paper summarizes the damage incurred by the building; the majority of the damage was observed in the third story in the span direction. The damage was quantitatively evaluated using the damage index R according to the Japanese guidelines for post‐earthquake damage evaluation. The damage index was also applied to the proposed spectral response identification method. The seismic performance of the building was evaluated by a nonlinear static analysis. The analytical results reproduced a drift concentration in the third story. The R‐index decreased with an increase in the story drift, which provided an estimation of the maximum response of the building during the earthquake. The estimation was verified via an earthquake response analysis of the building using ground acceleration data, which were simulated based on acceleration records of engineering bedrock that considered site amplification. The maximum response estimated by the R‐index was consistent with the maximum response obtained from the earthquake response analysis. Therefore, the proposed method enables the construction of spectral response curves by integrating the identification results for the maximum responses in a number of earthquake‐damaged buildings despite a lack of seismic records. Copyright © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.     

Correlation of JMA instrumental seismic intensity with strong motion parameters

The Japan Meteorological Agency (JMA) seismic intensity (I_JMA) has been used as a measure of strong shaking for many years in Japan, and it necessitates to know the correlation between the JMA seismic intensity and other strong motion indices, e.g. Peak Ground Acceleration (PGA), Peak Ground Velocity (PGV), and Spectrum Intensity (SI). In this study, two strong motion data sets were selected; in which, the first set consists of 879 three‐components non‐liquefied records selected from 13 major earthquake events that occurred in Japan, the United States, and Taiwan, and the second set consists of 17 liquefied records selected from 7 major earthquake events that occurred in Japan and the United States. The JMA seismic intensity and other ground motion indices were calculated using the selected data sets. The relationships between the JMA seismic intensity and PGA, PGV, and SI were then derived performing a two‐stage linear regression analysis. Results from the analysis show that the JMA instrumental seismic intensity shows higher correlation with SI than PGA or PGV, and it shows the highest correlation with the parameters such as the combination of PGA and SI or the product of PGA and SI. The obtained relationships are also compared with the ones obtained by other studies, which may be useful for the disaster management agencies in Japan and deployment of new SI‐sensors that monitor both PGA and SI. Copyright © 2002 John Wiley & Sons, Ltd.     

Estimation of Strong Ground Motions for 2001 Bhuj (M w 7.6), India Earthquake

The strong ground motions for the 2001 Bhuj (M _w 7.6) India earthquake have been estimated on hard rock and B/C boundary (NEHRP) levels using a recently modified version of stochastic finite fault modeling based on dynamic corner frequency (Motazedian and Atkinson in Bull Seismol Soc Am 95, 995–1010 2005). Incorporation of dynamic corner frequency removes the limitations of earlier stochastic methods. Simulations were carried out at 13 sites in Gujarat where structural response recorder (SRR) recordings are available. In addition, accelerograms were simulated at the B/C boundary at a large number of points distributed on a grid. The corresponding response spectra have also been estimated. The values of peak ground accelerations and spectral accelerations at three periods (0.4, 0.75 and 1.25 s) are presented in the form of contour maps. The maximum value of peak ground acceleration (PGA) in the center of meizoseismal zone is 550 cm/s². The response spectral acceleration in same zone is 900 cm/s² (T = 0.4 s), 600 cm/s² (T = 0.75 s) and 300 cm/s² (T = 1.25 s). The innermost PGA contour is on the fault plane. A comparison of the PGA values obtained at 13 sites in this study with those obtained in earlier studies on the same sites, but employing different methods, show that the present PGA values are comparable at most of the sites. The rate of decay of PGA values is fast at short distances as compared to that at longer distances. The PGA values obtained here put some constraints on the expected values from a similar earthquake in the region. A synthetic intensity map has been prepared from the estimated values of PGA using an empirical relation. A comparison with the reported intensity map of the earthquake shows the synthetic MMI values, as expected, are lower by 1 unit compared to reported intensity map. The contour map of PGA along with the contour maps of spectral acceleration at various periods permit the assessment of damage potential to various categories of houses and other structures. Such information will be quite important in planning of mitigation and disaster management programs in the region.     

On the treatment of uncertainty in seismic vulnerability and portfolio risk assessment

In a related study developed by the authors, building fragility is represented by intensity‐specific distributions of damage exceedance probability of various damage states. The contribution of the latter has been demonstrated in the context of loss estimation of building portfolios, where it is shown that the proposed concept of conditional fragility functions provides the link between seismic intensity and the uncertainty in damage exceedance probabilities. In the present study, this methodology is extended to the definition of building vulnerability, whereby vulnerability functions are characterized by hazard‐consistent distributions of damage ratio per level of primary seismic intensity parameter—Sa(T₁). The latter is further included in a loss assessment framework, in which the impact of variability and spatial correlation of damage ratio in the probabilistic evaluation of seismic loss is accounted for, using test‐bed portfolios of 2, 5, and 8‐story precode reinforced concrete buildings located in the district of Lisbon, Portugal. This methodology is evaluated in comparison with current state‐of‐the‐art methods of vulnerability and loss calculation, highlighting the discrepancies that can arise in loss estimates when the variability and spatial distributions of damage ratio, influenced by ground motion properties other than the considered primary intensity measure, are not taken into account.     

Fragility curves of concrete bridges retrofitted by column jacketing

The Northridge earthquake inflicted various levels of damage upon a large number of Caltrans’ bridges not retrofitted by column jacketing. In this respect, this study represents results of fragility curve development for two (2) sample bridges typical in southern California, strengthened for seismic retrofit by means of steel jacketing of bridge columns. Monte Carlo simulation is performed to study nonlinear dynamic responses of the bridges before and after column retrofit. Fragility curves in this study are represented by lognormal distribution functions with two parameters and developed as a function of PGA. The sixty (60) ground acceleration time histories for the Los Angeles area developed for the Federal Emergency Management Agcncy (FEMA) SAC (SEAOC-ATC-CUREe) steel project are used for the dynamic analysis of the bridges. The improvement in the fragility with steel jacketing is quantified by comparing fragility curves of the bridge before and after column retrofit. In this first attempt to formulate the problem of fragility enhancement, the quantification is made by comparing the median values of the fragility curves before and after the retrofit. Under the hypothesis that this quantification also applies to empirical fragility curves developed on the basis of Northridge earthquake damage, the enhanced version of the empirical curves is developed for the ensuing analysis to determine the enhancement of transportation network performance due to the retrofit. Supported by: MCEER/FHWA under Contract No.DTFH 61-98-C-00094 and Caltrans under Contract No.59A0304     

Need of performance‐based earthquake engineering in Taiwan: a lesson from the Chichi earthquake

The objectives of seismic engineering are to design and build better and more economic earthquake‐resistant structures. Performance, which is measured as the amount of damage of a facility and the impact of damage to the society after an earthquake, is the main concern. Performance‐based earthquake engineering (PBEE) implies design, evaluation, and construction of engineered facilities whose performance under common and extreme earthquake ground motions responds to the diverse needs and objectives of the owners, users and society. Observations on the performance or damage of structures after strong earthquake ground motions have always served as an effective means to evaluate the current seismic regulations and guidelines and make further improvements afterwards. This paper presents some of the typical damage evidence after the Chichi earthquake occurred recently in Taiwan. Important issues in performance‐based earthquake engineering that need to be considered in future seismic regulations of Taiwan are addressed accordingly. Copyright © 2000 John Wiley & Sons, Ltd.