Derivation of Structure Parameters of Temperature and Humidity in the Convective Boundary Layer from Large-Eddy Simulations and Implications for the Interpretation of Scintillometer Observations

We derive the turbulent structure parameters of temperature $C_{T}^2$ and humidity $C_q^2$ from high-resolution large-eddy simulations (LES) of a homogeneously-heated convective boundary layer. Boundary conditions and model forcing were derived from measurements at Cabauw in The Netherlands. Three different methods to obtain the structure-parameters from LES are investigated. The shape of the vertical structure-parameter profiles from all three methods compare well with former experimental and LES results. Depending on the method, deviations in the magnitude up to a factor of two are found and traced back to the effects of discretization and numerical dissipation of the advection scheme. Furthermore, we validate the LES data with airborne and large-aperture scintillometer (LAS) measurements at Cabauw. Virtual path measurements are used to study the variability of $C_{T}^2$ in the mixed layer and surface layer and its implications for airborne and LAS measurements. A high variability of $C_{T}^2$ along a given horizontal path in the LES data is associated with plumes (high values) and downdrafts (low values). The path average of $C_{T}^2$ varies rapidly in time due to the limited path length. The LES results suggest that measured path averages require sufficient temporal averaging and an adequate ratio of path length to height above the ground for the LAS in order to approach the domain average of $C_{T}^2$ .     

Surface Heterogeneity Effects on Regional-Scale Fluxes in the Stable Boundary Layer: Aerodynamic Roughness Length Transitions

The effects of abrupt streamwise transitions of the aerodynamic roughness length ( $z_\mathrm{o}$ z o ) on the stable atmospheric boundary layer are evaluated using a series of large-eddy simulations based on the first Global Energy and Water Cycle Experiment Atmospheric Boundary Layer intercomparison study (GABLS1). Four $z_\mathrm{o}$ z o values spanning three orders of magnitude are used to create all possible binary distributions with each arranged into patches of characteristic length scales equal to roughly one-half, one, and two times the equivalent homogeneous boundary-layer height. The impact of the heterogeneity on mean profiles of wind speed and temperature, on surface fluxes of heat and momentum, and on internal boundary-layer dynamics are considered. It is found that $z_\mathrm{o}$ z o transitions do not significantly alter the functional relationship between the average surface fluxes and the mean profiles of wind speed and potential temperature. Although this suggests that bulk similarity theory is applicable for modelling the stable boundary layer over $z_\mathrm{o}$ z o heterogeneity, effective surface parameters must still be specified. Existing models that solve for effective roughness lengths of momentum and heat are evaluated and compared to values derived from the simulation data. The existing models are unable to accurately reproduce both the values of the effective aerodynamic roughness lengths and their trends as functions of patch length scale and stability. A new model for the effective aerodynamic roughness length is developed to exploit the benefits of the other models tested. It accurately accounts for the effects of the heterogeneity and stratification on the blending height and effective aerodynamic roughness length. The new model provides improved average surface fluxes when used with bulk similarity.     

Turbulent Schmidt Numbers Above a Wheat Crop

Measurements of vertical fluxes and concentration differences above a spring wheat crop (height $h=0.9$ – $0.95$  m, row spacing 0.25 m, displacement height $d=0.5$ – $0.6$  m) were analyzed to determine the Schmidt numbers for water vapour ( $S^\mathrm{v}$ ) and carbon dioxide ( $S^\mathrm{c}$ ) based on concentration differences between intakes 2.55 and 3.54 m above the ground. During nearly-neutral stratification $S^\mathrm{v}(0) = 0.68 \pm 0.1$ while $S^\mathrm{c} = 0.78 \pm 0.2$ , implying that the roughness sublayer extended above $2.5 h$ .     

Intercomparison of Methods for the Simultaneous Estimation of Zero-Plane Displacement and Aerodynamic Roughness Length from Single-Level Eddy-Covariance Data

We applied three approaches to estimate the zero-plane displacement $d$ through the aerodynamic measurement height $z$ (with $z = z_{m}- d$ and $z_{m}$ being the measurement height above the surface), and the aerodynamic roughness length $z_{0}$ , from single-level eddy covariance data. Two approaches (one iterative and one regression-based) were based on the universal function in the logarithmic wind profile and yielded an inherently simultaneous estimation of both $d$ and $z_{0}$ . The third approach was based on flux–variance similarity, where estimation of $d$ and consecutive estimation of $z_{0}$ are independent steps. Each approach was further divided into two methods differing either with respect to the solution technique (profile approaches) or with respect to the variable (variance of vertical wind and temperature, respectively). All methods were applied to measurements above a large, growing wheat field where a uniform canopy height and its frequent monitoring provided plausibility limits for the resulting estimates of time-variant $d$ and $z_{0}$ . After applying, for each approach, a specific data filtering that accounted for the range of conditions (e.g. stability) for which it is valid, five of the six methods were able to describe the temporal changes of roughness parameters associated with crop growth and harvest, and four of them agreed on $d$ to within 0.3 m most of the time. Application of the same methods to measurements with a more heterogeneous footprint consisting of fully-grown sugarbeet and a varying contribution of adjacent harvested fields exhibited a plausible dependence of the roughness parameters on the sugarbeet fraction. It also revealed that the methods producing the largest outliers can differ between site conditions and stability. We therefore conclude that when determining $d$ for canopies with unknown properties from single-level measurements, as is increasingly done, it is important to compare the results of a number of methods rather than rely on a single one. An ensemble average or median of the results, possibly after elimination of methods that produce outliers, can help to yield more robust estimates. The estimates of $z_{0}$ were almost exclusively physically plausible, although $d$ was considered unknown and estimated simultaneously with the methods and results described above.     

A Scale-Adaptive Approach for Spatially-Varying Urban Morphology Characterization in Boundary Layer Parametrization Using Multi-Resolution Analysis

Urban morphology characterization is crucial for the parametrization of boundary-layer development over urban areas. One complexity in such a characterization is the three-dimensional variation of the urban canopies and textures, which are customarily reduced to and represented by one-dimensional varying parametrization such as the aerodynamic roughness length $z_{0}$ and zero-plane displacement $d$ . The scope of the paper is to provide novel means for a scale-adaptive spatially-varying parametrization of the boundary layer by addressing this 3-D variation. Specifically, the 3-D variation of urban geometries often poses questions in the multi-scale modelling of air pollution dispersion and other climate or weather-related modelling applications that have not been addressed yet, such as: (a) how we represent urban attributes (parameters) appropriately for the multi-scale nature and multi-resolution basis of weather numerical models, (b) how we quantify the uniqueness of an urban database in the context of modelling urban effects in large-scale weather numerical models, and (c) how we derive the impact and influence of a particular building in pre-specified sub-domain areas of the urban database. We illustrate how multi-resolution analysis (MRA) addresses and answers the afore-mentioned questions by taking as an example the Central Business District of Oklahoma City. The selection of MRA is motivated by its capacity for multi-scale sampling; in the MRA the “urban” signal depicting a city is decomposed into an approximation, a representation at a higher scale, and a detail, the part removed at lower scales to yield the approximation. Different levels of approximations were deduced for the building height $\bar{{H}}$ and planar packing density $\lambda _\mathrm{p}$ . A spatially-varying characterization with a scale-adaptive capacity is obtained for the boundary-layer parameters (aerodynamic roughness length $z_{0}$ and zero-plane displacement $d$ ) using the MRA-deduced results for the building height and the planar packing density with a morphometric model; an attribute that is shown to be of great advantage to multi-scale and multi-resolution numerical weather prediction models.     

The Effect of a New Calibration Procedure on the Measurement Accuracy of Scintec’s Displaced-Beam Laser Scintillometer

We describe a new calibration procedure included in the production process of Scintec’s displaced-beam laser scintillometers (SLS-20/40) and its effect on their measurement accuracy. The calibration procedure determines the factual displacement distances of the laser beams at the receiver and transmitter units, instead of assuming a prescribed displacement distance of 2.70 mm. For this study, four scintillometers operated by Wageningen University and the German Meteorological Service were calibrated by Scintec and their data re-analyzed. The results show that significant discrepancies may exist between the factual and the prescribed displacement distances. Generally, the factual displacement is about 0.1 mm smaller than 2.70 mm, but extremes varied between 0.04 and 0.24 mm. Correspondingly, using non-calibrated scintillometers may result in biases as large as 20 % in the estimates of the inner-scale length, $l_{0}$ , the structure parameter of the refractive index, $C_{n_{_2}}$ , and the friction velocity, $u_{*}$ . The bias in the sensible heat flux was negligible, because biases in $C_{n_{_2}}$ and $u_{*}$ cancel. Hence, the discrepancies explain much of the long observed underestimations of $u_{*}$ determined by these scintillometers. Furthermore, the calibration improves the mutual agreement between the scintillometers for $l_{0}$ , but especially for $C_{n_{_2}}$ . Finally, it is noted that the measurement specifications of the scintillometer do not expire and hence the results of the calibration can be applied retroactively.     

On the Mechanism of Air Pollutant Removal in Two-Dimensional Idealized Street Canyons: A Large-Eddy Simulation Approach

Flow resistance, ventilation, and pollutant removal for idealized two-dimensional (2D) street canyons of different building-height to street-width (aspect) ratios $AR$ are examined using the friction factor $f$ , air exchange rate (ACH), and pollutant exchange rate (PCH), respectively, calculated by large-eddy simulation (LES). The flows are basically classified into three characteristic regimes, namely isolated roughness, wake interference, and skimming flow, as functions of the aspect ratios. The LES results are validated by various experimental and numerical datasets available in the literature. The friction factor increases with decreasing aspect ratio and reaches a peak at $AR = 0.1$ in the isolated roughness regime and decreases thereafter. As with the friction factor, the ACH increases with decreasing aspect ratio in the wake interference and skimming flow regimes, signifying the improved aged air removal for a wider street canyon. The PCH exhibits a behaviour different from its ACH counterpart in the range of aspect ratios tested. Pollutants are most effectively removed from the street canyon with $AR = 0.5$ . However, a minimum of PCH is found nearby at $AR = 0.3$ , at which the pollutant removal is sharply weakened. Besides, the ACH and PCH are partitioned into the mean and turbulent components to compare their relative contributions. In line with our earlier Reynolds-averaged Navier–Stokes calculations (Liu et al., Atmos Environ 45:4763–4769, 2011), the current LES shows that the turbulent components contribute more to both ACH and PCH, consistently demonstrating the importance of atmospheric turbulence in the ventilation and pollutant removal for urban areas.     

Some Statistics of the Temperature Structure Parameter in the Convective Boundary Layer Observed by Sodar

The characteristics of the temporal and height variations of the temperature structure parameter $C_\mathrm{T}^{2}$ in strongly convective situations derived from the sodar echo-signal intensity measurements were analyzed for the first 100 m. It was corroborated that the probability density function (pdf) of the logarithm of $C_\mathrm{T}^{2}$ in the lower convective boundary layer is markedly non-Gaussian, whereas turbulence theory predicts it to be normal. It was also corroborated that the sum of two weighted Gaussians, which characterize the statistics of $C_\mathrm{T}^{2}$ within convective plumes and in their environment and the probability of plume occurrence, well approximates the observed pdfs. It was shown that the height behaviour of the arithmetic mean of $ C_\mathrm{T}^{2}$ (both total and within plumes) follows well a power law $C_\mathrm{T}^{2} (z) \sim z^{-q}$ with the exponent $q$ close to the theoretically predicted value of 4/3. But for the geometrical means of $C_\mathrm{T}^{2}$ (both total and within the plumes), $q$ is close to 1. The difference between arithmetically and geometrically averaged $C_\mathrm{T}^{2}$ profiles was analyzed. The vertical profiles of the standard deviation, skewness and kurtosis of $\hbox {ln}C_\mathrm{T}^{2}$ pdfs were analyzed to show their steady behaviour with height. The standard deviations of the logarithm of $C_\mathrm{T}^{2}$ within the plumes and between them are similar and are 1.5 times less than the total standard deviation. The estimate of the variability index $F_\mathrm{T}$ and its height behaviour were obtained, which can be useful to validate some theoretical and modelling predictions. The vertical profiles of the skewness and kurtosis show the negative asymmetry of pdfs and their flatness, respectively. The spectra of variations in $\hbox {ln}C_\mathrm{T}^{2}$ are shown to be satisfactorily fitted by the power law $f^{-\gamma } $ in the frequency range 0.02 and 0.2 Hz, with the average exponent $\approx $ 1.27  $\pm $  0.22.     

Investigation of the Flow Structure in Step-Up Street Canyons—Mean Flow and Turbulence Statistics

A step-up street canyon is a characteristic urban element composed of two buildings in which the height of the upwind building ( $H_\mathrm{u}$ ) is less than the height of the downwind building ( $H_\mathrm{d}$ ). Here, the effect of canyon geometry on the flow structure in isolated step-up street canyons is investigated through isothermal wind-tunnel measurements. The measurements were acquired along the vertical symmetry plane of model buildings using two-dimensional particle image velocimetry (PIV) for normal approach flow. The building-height ratios considered were: $H_\mathrm{d}/ H_\mathrm{u} \approx 3$ , and $H_\mathrm{d}/ H_\mathrm{u} \approx 1.67$ . For each building-height ratio, the along-wind lengths (L) of the upwind and downwind buildings, and the street-canyon width (S) were kept constant, with $L \approx S$ . The cross-wind widths (W) of the upwind and downwind buildings were varied uniformly from $W/S \approx 1$ through $W/S \approx 4$ , in increments of $W/S \approx 1$ . The objective of the work was to characterize the changes in the flow structure in step-up canyons as a function of W/S, for fixed L, S, and $H_\mathrm{d}/H_\mathrm{u}$ values. The results indicate that the in-canyon flow structure does not vary significantly for $H_\mathrm{d}/H_\mathrm{u} \approx 3$ for the W/S values considered. Qualitatively, for $H_\mathrm{d}/H_\mathrm{u} \approx 3$ , the upwind building behaves as an obstacle in the upwind cavity of the downwind building. In contrast, the flow patterns observed for the $H_\mathrm{d}/H_\mathrm{u} \approx 1.67$ configurations are unique and counter-intuitive, and depend strongly on building width (W/S). For $W/S \approx 1$ and $W/S \approx 2$ , the effect of lateral flow into the canyon is so prominent that even the mean flow patterns are highly ambiguous. For $W/S \approx 3$ and 4, the flow along the vertical symmetry plane is more shielded from the lateral flow, and hence a stable counter-rotating vortex pair is observed in the canyon. In addition to these qualitative features, a quantitative analysis of the mean flow field and turbulence stress field is presented.     

Bulk Mixing and Decoupling of the Nocturnal Stable Boundary Layer Characterized Using a Ubiquitous Natural Tracer

Vertical mixing of the nocturnal stable boundary layer (SBL) over a complex land surface is investigated for a range of stabilities, using a decoupling index ( $0 < D_{rb} < 1$ ) based on the 2–50 m bulk gradient of the ubiquitous natural trace gas radon-222. The relationship between $D_{rb}$ and the bulk Richardson number ( $R_{ib}$ ) exhibits three broad regions: (1) a well-mixed region ( $D_{rb} \approx 0.05$ ) in weakly stable conditions ( $R_{ib} < 0.03$ ); (2) a steeply increasing region ( $0.05 < D_{rb} < 0.9$ ) for “transitional” stabilities ( $0.03 < R_{ib} < 1$ ); and (3) a decoupled region ( $D_{rb} \approx 0.9$ –1.0) in very stable conditions ( $R_{ib} > 1$ ). $D_{rb}$ exhibits a large variability within individual $R_{ib}$ bins, however, due to a range of competing processes influencing bulk mixing under different conditions. To explore these processes in $R_{ib}$ – $D_{rb}$ space, we perform a bivariate analysis of the bulk thermodynamic gradients, various indicators of external influences, and key turbulence quantities at 10 and 50 m. Strong and consistent patterns are found, and five distinct regions in $R_{ib}$ – $D_{rb}$ space are identified and associated with archetypal stable boundary-layer regimes. Results demonstrate that the introduction of a scalar decoupling index yields valuable information about turbulent mixing in the SBL that cannot be gained directly from a single bulk thermodynamic stability parameter. A significant part of the high variability observed in turbulence statistics during very stable conditions is attributable to changes in the degree of decoupling of the SBL from the residual layer above. When examined in $R_{ib}$ – $D_{rb}$ space, it is seen that very different turbulence regimes can occur for the same value of $R_{ib}$ , depending on the particular combination of values for the bulk temperature gradient and wind shear, together with external factors. Extremely low turbulent variances and fluxes are found at 50 m height when $R_{ib} > 1$ and $D_{rb} \approx 1$ (fully decoupled). These “quiescent” cases tend to occur when geostrophic forcing is very weak and subsidence is present, but are not associated with the largest bulk temperature gradients. Humidity and net radiation data indicate the presence of low cloud, patchy fog or dew, any of which may aid decoupling in these cases by preventing temperature gradients from increasing sufficiently to favour gravity wave activity. The largest temperature gradients in our dataset are actually associated with smaller values of the decoupling index ( $D_{rb} < 0.7$ ), indicating the presence of mixing. Strong evidence is seen from enhanced turbulence levels, fluxes and submeso activity at 50 m, as well as high temperature variances and heat flux intermittencies at 10 m, suggesting this region of the $R_{ib}$ – $D_{rb}$ distribution can be identified as a top-down mixing regime. This may indicate an important role for gravity waves and other wave-like phenomena in providing the energy required for sporadic mixing at this complex terrain site.     

Vertical Distribution of Radiation and Energy Balance Partitioning Within and Above a Lodgepole Pine Stand Recovering from a Recent Insect Attack

The current outbreak of mountain pine beetle (MPB) that started in the late 1990s in British Columbia, Canada, is the largest ever recorded in the north American native habitat of the beetle. The killing of trees is expected to change the vertical distribution of net radiation ( $Q^*$ Q ? ) and the partitioning of latent ( $Q_\mathrm{E}$ Q E ) and sensible ( $Q_\mathrm{H}$ Q H ) heat fluxes in the different layers of an attacked forest canopy. During an intensive observation period in the summer of 2010, eddy-covariance flux and radiation measurements were made at seven heights from ground level up to 1.34 times the canopy height in an MPB-attacked open-canopy forest stand $(\hbox {leaf area index} = 0.55~\mathrm{{m}}^{2}\ \mathrm{{m}}^{-2})$ ( leaf area index = 0.55 m 2 m - 2 ) in the interior of British Columbia, Canada. The lodgepole pine dominated stand with a rich secondary structure (trees and understorey not killed by the beetle) was first attacked by the MPB in 2003 and received no management. In this study, the vertical distribution of the energy balance components and their sources and sinks were analyzed and energy balance closure (EBC) was determined for various levels within the canopy. The low stand density resulted in approximately 60 % of the shortwave irradiance and 50 % of the daily total $Q^*$ Q ? reaching the ground. Flux divergence calculations indicated relatively strong sources of latent heat at the ground and where the secondary structure was located. Only very weak sources of latent heat were found in the upper part of the canopy, which was mainly occupied by dead lodgepole pine trees. $Q_\mathrm{H}$ Q H was the dominant term throughout the canopy, and the Bowen ratio ( $Q_\mathrm{H}/Q_\mathrm{E}$ Q H / Q E ) increased with height in the canopy. Soil heat flux ( $Q_\mathrm{G}$ Q G ) accounted for approximately 4 % of $Q^*$ Q ? . Sensible heat storage in the air ( $\Delta Q_\mathrm{S,H}$ Δ Q S , H ) was the largest of the energy balance storage components in the upper canopy during daytime, while in the lower canopy sensible heat storage in the boles ( $\Delta Q_\mathrm{S,B}$ Δ Q S , B ) and biochemical energy storage ( $\Delta Q_\mathrm{S,C}$ Δ Q S , C ) were the largest terms. $\Delta Q_\mathrm{S,H}$ Δ Q S , H was almost constant from the bottom to above the canopy. $\Delta Q_\mathrm{S,C}$ Δ Q S , C , $\Delta Q_\mathrm{S,B}$ Δ Q S , B and latent heat storage in the air ( $\Delta Q_\mathrm{S,E}$ Δ Q S , E ) varied more than $\Delta Q_\mathrm{S,H}$ Δ Q S , H throughout the canopy. During daytime, energy balance closure was high in and above the upper canopy, and in the lowest canopy level. However, where the secondary structure was most abundant, ${\textit{EBC}} \le 66\,\%$ EBC ≤ 66 % . During nighttime, the storage terms together with $Q_\mathrm{G}$ Q G made up the largest part of the energy balance, while $Q_\mathrm{H}$ Q H and $Q_\mathrm{E}$ Q E were relatively small. These radiation and energy balance measurements in an insect-attacked forest highlight the role of secondary structure in the recovery of attacked stands.     

Scalar Flux–Gradient Relationships Under Unstable Conditions over Water in Coastal Regions

The scalar flux–gradient relationships of temperature ( $\phi _{T}$ ? T ) and specific humidity ( $\phi _{q}$ ? q ) under unstable conditions are investigated using eddy-covariance measurements of air–sea turbulent fluxes and vertical profiles of temperature and specific humidity collected from a marine meteorological platform. The gradients of temperature and specific humidity are obtained from measurements at five heights above the sea surface using the log-square fitting method and the simpler first-order approximation method. The two methods yield similar results. The proposed flux–gradient relationships $\phi _{T}$ ? T and $\phi _{q}$ ? q covers a wide range of instability: the stability parameter $\zeta $ ζ ranges from $-$ ? 0.1 to $-$ ? 50. The functional form of the proposed flux–gradient relationships is an interpolation between the Businger–Dyer relation and the free convection relation, which includes the “ $-$ ? 1/2” and “ $-$ ? 1/3” scaling laws at two different stability regimes. The widely used COARE 3.0 algorithm, which is an interpolation between the integrals of the Businger–Dyer and the free convection relations, is also evaluated and compared. The analysis and comparisons show that both schemes generate reasonable values of $\phi _{q}$ ? q in the whole unstable regime. The COARE 3.0 algorithm, however, overestimates $\phi _{T}$ ? T values under very unstable conditions. The errors in the flux–gradient relationships induced by the random errors in the turbulence measurements are assessed. When the random errors are taken into account, the observations agree with predictions of various schemes fairly well, implying that the dominant transport mechanism is adequately captured by the Monin–Obukhov similarity theory. The study also shows that $\phi _{q}$ ? q is significantly ${>}\phi _{T}$ > ? T under unstable conditions and that the ratio $\phi _{q}/\phi _{T}$ ? q / ? T increases with $-\zeta $ ? ζ . The ratio of $\phi _{q}$ ? q to $\phi _{T}$ ? T and the ratio of turbulent transport efficiencies of heat and water vapour ( $R_{wT}/R_{wq}$ R wT / R wq ) suggest that heat is transported more efficiently than water vapour under unstable conditions.     

Storm Surges in New York During Hurricane Sandy in 2012: A Verification of the Wind-Stress Tide Relation

In October 2012 Hurricane Sandy devastated New York City and its vicinity caused mainly by the storm surge, which is the water height above normal astronomical tide level. The meteorological conditions were as follows: minimum central pressure, 962 hPa, highest sustained wind speed 27.1 m s $^{-1}$ ? 1 and maximum gust 37.8 m s $^{-1}$ ? 1 . The peak storm surge was at 3.9 m and the peak storm tide at 4.4 m (which is referenced above mean lower low water). The wind-stress tide relation shows that $S=K\,V^{2}$ S = K V 2 , where $S$ S is the storm surge, $V$ V is the wind speed and $K$ K is the coefficient. It is found that with $S$ S in units of m, and $V$ V in  m s $^{-1}$ ? 1 , $K = 0.0051$ K = 0.0051 with $R^{2}= 0.91$ R 2 = 0.91 ( $R$ R is the correlation coefficient) indicating that 91 % of the total variation of the storm surge can be explained by variations in the wind stress, which is proportional to $V^{2}$ V 2 . Similar results were obtained during Hurricane Irene in 2011, which also affected the New York area. Therefore, this simple wind stress-tide relation should be useful in coastal engineering, urban planning, and emergency management.     

Asymmetric effects of soil moisture on mean daily maximum and minimum temperatures over eastern China

This study statistically investigates the effects of soil moisture on mean daily maximum ( $T_{\rm{max} }$ ) and minimum temperatures ( $T_{\rm{min} }$ ) over eastern China in spring (from March to May), summer (from June to August) and fall (from September to November), using the Global Land Data Assimilation System (GLDAS) soil moisture and observational temperatures. The results show that soil moisture exerts asymmetric effects on $T_{\rm{max} }$ and $T_{\rm{min} }$ , thereby has substantial effects on the diurnal temperature range (DTR) in the three seasons. The soil moisture feedbacks on $T_{\rm{max} }$ , $T_{\rm{min} }$ , and DTR are found to evidently vary with season. In spring and summer, soil moisture exerts stronger negative forcing on $T_{\rm{max} }$ than $T_{\rm{min} }$ , and thus has negative effects on the DTR over many areas of northern China. In fall, soil moisture has much stronger positive effects on $T_{\rm{min} }$ than $T_{\rm{max} }$ , and thus has significant negative effects on the DTR over Northeast China and some areas of the climatic and ecological transition zone of northern China. The uncertainties in the employed data and method should be noted. Therefore, the results need to be further investigated by other data sets and methods in the future.     

Improving Stable Boundary-Layer Height Estimation Using a Stability-Dependent Critical Bulk Richardson Number

For many decades, attempts have been made to find the universal value of the critical bulk Richardson number ( $Ri_{Bc}$ ; defined over the entire stable boundary layer). By analyzing an extensive large-eddy simulation database and various published wind-tunnel data, we show that $Ri_{Bc}$ is not a constant, rather it strongly depends on bulk atmospheric stability. A (qualitatively) similar dependency, based on the well-known resistance laws, was reported by Melgarejo and Deardorff (J Atmos Sci 31:1324–1333, 1974) about forty years ago. To the best of our knowledge, this result has largely been ignored. Based on data analysis, we find that the stability-dependent $Ri_{Bc}$ estimates boundary-layer height more accurately than the conventional constant $Ri_{Bc}$ approach. Furthermore, our results indicate that the common practice of setting $Ri_{Bc}$ as a constant in numerical modelling studies implicitly constrains the bulk stability of the simulated boundary layer. The proposed stability-dependent $Ri_{Bc}$ does not suffer from such an inappropriate constraint.     

Similarity Scaling Over a Steep Alpine Slope

In this study, we investigate the validity of similarity scaling over a steep mountain slope (30–41 $^\circ $ ). The results are based on eddy-covariance data collected during the Slope Experiment near La Fouly (SELF-2010); a field campaign conducted in a narrow valley of the Swiss Alps during summer 2010. The turbulent fluxes of heat and momentum are found to vary significantly with height in the first few metres above the inclined surface. These variations exceed by an order of magnitude the well-accepted maximum 10 % required for the applicability of Monin–Obukhov similarity theory in the surface layer. This could be due to a surface layer that is too thin to be detected or to the presence of advective fluxes. It is shown that local scaling can be a useful tool in these cases when surface-layer theory breaks down. Under convective conditions and after removing the effects of self-correlation, the normalized standard deviations of slope-normal wind velocity, temperature and humidity scale relatively well with $z/\varLambda $ , where $z$ is the measurement height and $\varLambda (z)$ the local Obukhov length. However, the horizontal velocity fluctuations are not correlated with $z/\varLambda $ under all stability regimes. The non-dimensional gradients of wind velocity and temperature are also investigated. For those, the local scaling appears inappropriate, particularly at night when shallow drainage flows prevail and lead to negative wind-speed gradients close to the surface.     

Air–Sea \mathrm{CO}_{2} Gas Transfer Velocity in a Shallow Estuary

The air–sea transfer velocity of $\mathrm{CO}_{2}\, (k_{\mathrm{CO}_{2}})$ was investigated in a shallow estuary in March to July 2012, using eddy-covariance measurements of $\mathrm{CO}_{2}$ fluxes and measured air–sea $\mathrm{CO}_{2}$ partial-pressure differences. A data evaluation method that eliminates data by nine rejection criteria in order to heighten parametrization certainty is proposed. We tested the data evaluation method by comparing two datasets: one derived using quality criteria related solely to the eddy-covariance method, and the other derived using quality criteria based on both eddy-covariance and cospectral peak methods. The best parametrization of transfer velocity normalized to a Schmidt number of 600 $(k_{600})$ was determined to be: $k_{600} = 0.3\,{U_{10}}^{2.5}$ where $U_{10}$ is the wind speed in m $\mathrm{s}^{-1}$ at 10 m; $k_{600}$ is based on $\mathrm{CO}_{2}$ fluxes calculated by the eddy-covariance method and including the cospectral peak method criteria. At low wind speeds, the transfer velocity in the shallow water estuary was lower than in other coastal waters, possibly a symptom of low tidal amplitude leading to low intensity water turbulence. High transfer velocities were recorded above wind speeds of 5 m $\mathrm{s}^{-1}$ , believed to be caused by early-breaking waves and the large fetch (6.5 km) of the estuary. These findings indicate that turbulence in both air and water influences the transfer velocity.     

Observational Support for the Stability Dependence of the Bulk Richardson Number Across the Stable Boundary Layer

The bulk Richardson number ( $Ri_{Bh}$ ; defined over the entire stable boundary layer) is commonly utilized in observational and modelling studies for the estimation of the boundary-layer height. Traditionally, $Ri_{Bh}$ is assumed to be a quasi-universal constant. Recently, based on large-eddy simulation and wind-tunnel data, a stability-dependent relationship has been proposed for $Ri_{Bh}$ . In this study, we analyze extensive observational data from several field campaigns and provide further support for this newly proposed relationship.     

Characterization of Oscillatory Motions in the Stable Atmosphere of a Deep Valley

In a valley sheltered from strong synoptic effects, the dynamics of the valley atmosphere at night is dominated by katabatic winds. In a stably stratified atmosphere, these winds undergo temporal oscillations, whose frequency is given by $N \sin {\alpha }$ N sin α for an infinitely long slope of constant slope angle $\alpha $ α , $N$ N being the buoyancy frequency. Such an unsteady flow in a stably stratified atmosphere may also generate internal gravity waves (IGWs). The numerical study by Chemel et al. (Meteorol Atmos Phys 203:187–194, 2009) showed that, in the stable atmosphere of a deep valley, the oscillatory motions associated with the IGWs generated by katabatic winds are distinct from those of the katabatic winds. The IGW frequency was found to be independent of $\alpha $ α and about $0.8N$ 0.8 N . Their study did not consider the effects of the background stratification and valley geometry on these results. The present work extends this study by investigating those effects for a wide range of stratifications and slope angles, through numerical simulations for a deep valley. The two oscillatory systems are reproduced in the simulations. The frequency of the oscillations of the katabatic winds is found to be equal to $N$ N times the sine of the maximum slope angle. Remarkably, the IGW frequency is found to also vary as $C_\mathrm{w}N$ C w N , with $C_\mathrm{w}$ C w in the range $0.7$ 0.7 – $0.95$ 0.95 . These values for $C_\mathrm{w}$ C w are similar to those reported for IGWs radiated by any turbulent field with no dominant frequency component. Results suggest that the IGW wavelength is controlled by the valley depth.