Combined numerical investigation of the Gangda paleolandslide runout and associated dam breach flood propagation in the upper Jinsha River,SE Tibetan Plateau

A large paleolandslide occurred opposite the Gangda village in the upper Jinsha River, SE Tibetan Plateau. Field geological investigations and remote sensing indicated that the Gangda paleolandslide once blocked the Jinsha River. Evidence of river blocking, including landslide dam relics, upstream lacustrine sediments, and downstream outburst sediments, has been well preserved. To understand the river-blocking event including landslide, dam breach, and associated outburst flooding, optically stimulated luminescence (OSL) dating and numerical simulations were performed in this study. OSL dating results showed that the paleolandslide dam was formed at 5.4?±?0.5 ka BP and breached at 3.4?±?0.3 ka BP, indicating that the dam lasted approximately 2000 years. The discrete element method was used to simulate the dynamics of the Gangda rock landslide based on the restored topography, while a fluid–solid coupling model was performed to simulate the landslide dam breaching and flooding. The fluid–solid coupling model can simultaneously reflect the process of landslide-dam collapse and the propagation of outburst flood. The simulated results indicate that the whole landslide process lasted about 60 s with a peak velocity of 38 m/s. It is significant that the simulated morphology of the residual landslide dam and downstream outburst sediments is consistent with the field observations. The combined numerical investigation in this paper provided new insights into the research of landscape evolution and helped to understand the chain disaster of landslide, dam breach, and flooding.

     

Out-burst flood (lahar) triggered by retrogressive landsliding, 18 March 2007 at Mt Ruapehu,New Zealand—a successful early warning

The summit crater of Mt Ruapehu volcano normally hosts a 15.4-ha warm lake, whose water has been repeatedly wholly or partly ejected by explosive and extrusive eruptions. Some of the larger eruptions have modified the lake outlet by burying it under unconsolidated tephra (volcanic ash and blocks), creating a dam-break flood hazard independently of the occurrence of an eruption. Eruptions in 1995 and 1996 followed this sequence; a break-out flood was anticipated and a warning system was installed to mitigate the risk from this event and subsequent lahars in the same catchment. The 11-year filling time allowed much planning and rehearsal. The warning system involved manual inspections of dam integrity, and seepage and lake-level monitoring to constrain the likely failure window, and telemetered instruments including a tripwire and geophones to detect breaching of the dam and propagation of the outbreak flood. The dam-collapse sequence, captured by a time-lapse camera, involved a series of retrogressing landslides initiated and accelerated by seepage forces and toe scour when the lake was 1.1 m below overtopping. The barrier failed in two phases on 18th March, 2007, beginning at 09:55 (NZST), with rapid retreat of one of the erosion scarps on the downstream slope of the eastern barrier, initiated by internal erosion. Headward retrogression of the scarp into the barrier formed an initial breach in the dam, after which increasing outflow led to erosion and undercutting of the wider downstream toe of the western barrier. A final, larger dam breach occurred between 11:21 and 11:22 as slope instability caused retrogressive failure of the remaining barrier. Five-hundred meters downstream of the dam, a large landslide was reactivated by toe scour during the flood, contributing about a million cubic meters of solid material to the volumetric bulking of the outflow, which reached the coast, 215 km away, 17 h later. The success of the planning and warning system allowed the whole event to occur with little damage to infrastructure and without causing injury.     

Measurement of debris mass changes and assessment of the dam-break flood potential of earthquake-triggered Hattian landslide dam

The Hattian landslide, which was triggered by the 2005 Kashmir earthquake, formed one of largest landslide dams in the world and it has posed a serious threat of flooding to people living in the lower reach of the Jhelum River. In order to understand deformation occurring in the body of the dam, physical measurements using a Differential Global Positioning System (DGPS) were conducted. Gradual deformation and slowly developing backward erosion initially were observed, leading eventually to a sudden creation of a deep hollow on the downstream slope of the landslide dam. The dimensions of this eroded gully were determined by laser scanning, and the results showed a significant loss of soil volume and a large change in the body of the dam. A breach formation model was used to predict the outflow hydrograph generated by constant downcutting of dam during a breaching event. A run-off analysis of the outflow hydrograph was conducted to evaluate inundation levels of flood waves in case the dam is breached. Hazardous downstream locations were identified near the junction of the Karli and Jhelum Rivers, suggesting a need for early warning system in order to avoid loss of lives.     

Landslide dam failure and flood hydraulics. Part I: experimental investigation

Landslide dam failure can trigger catastrophic flooding in the downstream. However, field observation of such flooding is rarely available, while laboratory experimental studies are sparse. The mechanism of landslide dam failure and the flood has so far remained insufficiently understood. Here, we present an experimental investigation of landslide dam failure and the flood. A total of 28 runs of experiments are carried out in a flume of 80 m × 1.2 m × 0.8 m, with differing inflow discharge, dam composition, dam geometry, and initial breach dimension. An array of twelve automatic water-level probes is deployed to measure the stage hydrographs along the flume, and the video recording of the dam failure processes facilitates an estimation of the widening of initial breach. Under the present experimental conditions with dams composed of homogeneous materials, landslide dam failure is primarily caused by erosion of overtopping flow, and lateral mass collapse is also considerable during the cause of breach widening. Cohesive clay may act to mitigate the seepage through the dam and thus its subsidence and appreciably modulate the dam failure process and the flood. However, the impacts of clay may be readily overwhelmed by a large inflow discharge and initial breach. Gravels in the dam may appreciably depress the rate of the dam failure process and thus modify the flood. The present work provides new experimental data set for testing mathematical models of the flood flow due to landslide dam failure.     

喜马拉雅中段冰湖终碛坝体溃决过程实验研究

终碛坝广泛分布于世界各地的高山和极高山区。为了探究终碛坝的溃决过程,了解溃口的演变特征,文章以嘉龙错终碛坝的原位实验,模拟了终碛湖漫顶溃决过程。通过分析实验结果发现:（1）根据观察,将终碛坝溃决过程划分为坝体下游坡面冲刷、“溯源侵蚀”、出水口下切和溃口拓宽四个阶段。（2）上游湖区崩塌体激发的涌浪会造成溃口内的瞬时流量增加数倍,从而使得在有涌浪和无涌浪的条件下,“溯源侵蚀”过程出现陡坎和斜坡两种下切型。（3）通过分析溃口下切侵蚀过程,发现溃口的下切侵蚀发展过程主要受到坝体孔隙比和细粒含量的影响,并且溃口中点侵蚀率与水流剪应力存在一定的线性关系,符合线性侵蚀模型。通过分析发现,嘉龙错终碛坝的侵蚀系数为0.051,临界启动应力为237.64 Pa。与堰塞坝相比,可侵蚀系数比更小,而临界启动应力更大。     

Numerical simulation of landslide dam breaching due to overtopping

The breach of landslide dam often causes significant disaster in the inundated area; the prediction of breach hydrograph is in high demand for the dam breach risk evaluation. In this study, according to the model tests and Tangjiashan landslide dam breach case, the surface erosion accompanied by intermittent mass failure is known as the key breaching mechanism for landslide dam due to overtopping failure. The downstream slope angle would gradually decrease during the dam-breaching process, whereas a planar wedge failure occurs when the breach slopes at the dam crest and downstream breach channel fail. Based on the breach mechanism, a numerical model for landslide dam breach due to overtopping is developed to simulate the coupling process of water and soil. The model focuses on the breach morphology evolution during the breaching for the sake of the improvement of breach hydrograph prediction. Furthermore, the model can handle one- and two-sided breach, as well as incomplete and base erosion at the vertical direction. The case study of Tangjiashan landslide dam-breaching feedback analysis testifies the rationality of the present model with the relative errors less than 10% for peak discharge, final breach widths, and time to peak. The sensitivity analysis indicates that the final breach depth and soil erodibility affect the breach flow prediction of the landslide dam significantly, whereas the one- or two-sided breach mode is less sensitive.     

Landslide dam failure and flood hydraulics. Part II: coupled mathematical modelling

A coupled 2D mathematical modelling study of landslide dam failure and flood is presented, complementing our experimental investigation presented in the companion paper. The model is built upon the shallow water hydrodynamic equations. The governing equations are numerically solved using the total-variation-diminishing version of the second-order weighted-average-flux method along with the HLLC (Harten, Lax and van Leer with Contact wave restored) approximate Riemann solver. Two parameters related to bed-load sediment transport and critical slope stability are calibrated using the measured stage hydrographs from two runs of the flume experiments. The calibrated model is then applied to other independent runs of the experiments featuring different inflow discharges, dam geometry, dam composition and initial breach dimensions. It is found to be able to satisfactorily reproduce the measured stage hydrographs and the widening of initial breach. The experimental observation of the prime role of the inflow discharge and initial breach in dictating the dam failure process and flood is unequivocally resolved, along with the impacts of dam geometry as well the content of cohesive clay and gravel in the dam. Interestingly, the downstream peak discharge and stage of the flood are substantially reduced by initial breach, which clearly exemplifies its role in modulating the flooding.     

Dam-break risk analysis of the Attabad landslide dam in Pakistan and emergency countermeasures

The Attabad landslide dam caused significant property losses and many human casualties in Pakistan, and also greatly affected the operation of the China-Pakistan Karakoram Highway (KKH). This paper discusses the risk of dam breach and hazards to the KKH project construction site following a dam breach. The paper examines the following three topics. (1) The geomorphologic dimensionless blockage index (DBI) and the analogy method were used to analyze the stability of the Attabad landslide dam. The long-term behaviors of landslide dams downstream of the Attabad landslide dam indicate that the risk of a dam breach exists, but the probability of a total dam failure is low. (2) The peak discharge of a potential breach of the Attabad landslide dam was calculated for scenarios in which 1/4, 1/3, 1/2, and total failure of the dam was breached. The potential breach discharge decreases with the downstream distance. (3) The potential impacts of the landslide dam breach on the KKH project construction site were analyzed. Based on the composition of the landslide dam, the probability of a 1/3 dam breach is high. To ensure the safety of downstream areas, disaster preparedness plans that correspond to the 1/2 dam breach scenario should be developed. Based on experience in addressing the landslide dam that was caused by the Wenchuan Earthquake, artificial controlled drainage measures are suggested and provide a technical reference for addressing the Attabad landslide dam and achieving recovery and normal operation of KKH.     

堰塞坝漫顶溃决过程溃口纵向下切与溯源

为进一步了解堰塞坝溃坝过程,开展了9组水槽模型试验,对溃口纵向下切和溯源发展过程进行了系统分析,并讨论了上溯源点移动速度与溃口水深之间的关系。研究发现：非黏性堰塞坝溃坝过程中,冲刷面与底床的夹角时刻发生变化,上、下溯源点位置不固定但也不能完全发展到坝踵;上、下坡面坡度增大到最大值1：1.5时,下溯源点到下游坝趾的最大距离与坝体沿水流方向长度的比值（x_p^*/x_d^*,反映下溯源点最终相对位置）对应降低到最小值0.24和0.18;坝体相对尺寸从1减小到1/2时,x_p^*/x_d^*值从0.38增大到0.47。上溯源点的无量纲移动速度是不断变化的,在无量纲时刻为0.13时,其x,y分量分别达到峰值0.94和0.32;上溯源点处溃口水深出现时刻相对移动速度峰值点出现时刻有延迟,大概延迟0.04个无量纲时间。     

Landslides in moraines as triggers of glacial lake outburst floods: example from Palcacocha Lake (Cordillera Blanca,Peru)

Studies focusing on moraine deposits which slide into glacial lakes are scarce, even though they can trigger impact waves responsible for generating glacial lake outburst floods. We focused on landslides in lateral moraines as possible triggers. Detailed geomorphological, geophysical, and satellite radar interferometric investigations of the Palcacocha Lake moraine (Cordillera Blanca, Peru) together with laboratory tests on samples from the site provided data for slope stability calculations using GeoSlope software and hydrodynamic impact wave modeling using the Iber code. We identified landslides that could affect Palcacocha Lake and calculated their stability (factor of safety) under specified conditions, including variable water saturation and earthquake effects. Calculations showed that the moraine slopes are close to the threshold value (Fs?=?1) for stability and are especially sensitive to water saturation. The height of impact waves triggered by a landslide in 2003 and the potential wave heights from newly identified, possibly active landslides were calculated, based on landslide volume estimates, detailed lake bathymetry, and basin topography. Results show that potential future landslide-triggered waves could have similar properties to the 2003 impact wave. Evidence gathered in this study suggests that glacial lake outburst floods triggered by landslides from moraines, however, would be probably smaller than floods resulting from other types of slope processes (e.g., ice/rock avalanches) if dam breach is not taken into account. This assumption has to be critically evaluated against site-specific conditions at a given lake and any possible environmental factors, such as climate change or earthquake that may mobilize larger volumes of moraine material.     

考虑河床坡度和泄流槽横断面影响的堰塞坝溃决过程试验研究

针对缺乏地形条件和工程处置措施对堰塞坝溃决过程影响研究的现状,采用4种河床坡度(0°、1°、2°、3°)和3种泄流槽横断面型式(三角形、梯形、复合型),开展了堰塞坝溃决的模型试验。通过分析堰塞坝的溃决流量、溃决历时、溃口发展和坝体纵截面演变过程,研究了不同河床坡度和泄流槽横断面对堰塞坝溃决过程的影响规律。试验结果表明:(1)堰塞坝溃决过程可分为3个阶段。阶段Ⅰ:溃口形成阶段,溃决流量较小;阶段Ⅱ:溃口发展阶段,水流下蚀及侧蚀强烈,溃决流量到达峰值;阶段Ⅲ:衰减-平衡阶段,粗化层形成,溃口停止发展。(2)河床坡度增加意味着下游坝坡、坝顶及泄流槽的坡度增加,导致水流侵蚀能力增强,溃口下切迅猛,因此在0°～3°范围内河床坡度越大,峰值流量越大,峰现时间越早,溃决流量过程曲线越趋于“高瘦型”,且残留坝高越小。(3)泄流槽横断面型式不同导致其槽深、槽宽和侧坡坡度不同,进而影响溃口发展和溃决流量。三角形槽的水土作用面积小,溃口下切及展宽速率最高,峰值流量最大,峰现时间最早;梯形槽的槽底高程最高,水土作用面积最大,溃口下切速率最低,峰现时间最晚;而复合槽介于前两者之间。试验成果将为堰塞坝应急抢险和工...     

Evolution of a debris-rock slide causing a natural dam: the flash flood of Río Santa Cruz,Province of San Juan—November 12, 2005

Between 2001 and 2005, a large debris rock slide occurred on the western slope of the Cordillera de Santa Cruz in the southeast Andean corner of the Province of San Juan (31°40′ S–70°16′ W). The landslide material accumulated in a downstream gorge as a natural dam of the Santa Cruz river, forming a large-volume lake. In November 2005, probably as a result of the increasing pressure of the water volume, this natural dam breached off with a violent and unexpected flash flood. In addition to life-threatening instances lived by some people downstream, this flood caused great economic loss to main localities of the Department of Calingasta, as well as considerable damage to one of the most relevant projects of the Province, the Caracoles Hydropower Project dam on the San Juan river. Considering the high costs of any physical remediation for a natural dam located in this high, remote, and inaccessible mountain area with no reliable road access, the main protective measures left to be pondered are the installation of a flash-flood early-warning system connected to downstream localities, along with a program of hydrological monitoring at the dam-forming area and annual satellital monitoring to verify the evolution of accumulated mass movements.     

Formation,failure, and consequences of the Xiaolin landslide dam,triggered by extreme rainfall from Typhoon Morakot,Taiwan

An extreme rainfall event on August 9, 2009, which was close to setting a world record for 48-h accumulated rainfall, induced the Xiaolin deep-seated landslide, which was located in southwestern Taiwan and had volume of 27.6?×?10⁶?m³, and caused the formation of a landslide dam. The landslide dam burst in a very short time, and little information remained afterward. We reconstructed the process of formation and failure of the Xiaolin landslide dam and also inferred the area of the impoundment and topographic changes. A 5?×?5-m digital elevation model, the recorded water stage of the Qishan River, and data from field investigation were used for analysis. The spectral magnitude of the seismic signals induced by the Xiaolin landslide and flooding due to failure of the landslide dam were analyzed to estimate the timing of the dam breach and the peak discharge of the subsequent flood. The Xiaolin landslide dam failure resulted from overtopping. We verified the longevity of the Xiaolin landslide dam at about 2 h relying on seismic signals and water level records. In addition, the inundated area, volume of the impoundment behind the Xiaolin landslide dam, and peak discharge of the flood were estimated at 92.3 ha, 19.5?×?10⁶?m³, and 17?×?10³?m³/s, respectively. The mean velocity of the flood-recession wave front due to the dam blockage was estimated at 28 km/h, and the peak flooding velocity after failure of the dam was estimated at 23 km/h. The Xiaolin landslide provides an invaluable opportunity for understanding the mechanism of deep-seated landslides and flooding processes following a landslide dam failure.     

Case study of a giant debris flow in the Wenjia Gully, Sichuan Province, China

The debris flow, which was triggered in the Wenjia Gully on August 13, 2010, is an extreme example of mass movement events, which occurred after the Wenchuan earthquake of May 12, 2008. This Earthquake triggered in the Wenjia Gully the second largest co-seismic landslide, which can be classified as a rockslide-debris avalanche. A lot of loose sediments was deposited in the basin. In the main so called Deposition Area II of this landslide, with a volume of 30?×?10⁶?m³, flash floods can easily trigger debris flows because of the steep bottom slope and the relative small grain sizes of the sediments. The largest debris flow of August 13, 2010 destroyed the most downstream dam in the catchment during a heavy rain storm. The debris flow with a peak discharge of 1,530?m³/s and a total volume of 3.1?×?10⁶?m³ caused the death of 7 persons, 5 persons were missing, 39 persons were injured and 479 houses buried. After three rainy seasons, only 16?% of the landslide-debris deposition was taken away by 5 large-scale debris flow events. Since the threshold for rainfall triggered debris flows in the Wenjia Gully and other catchments drastically decreased after the Wenchuan Earthquake, new catastrophic events are expected in the future during the rainy season.     

Breaking mode of cohesive homogeneous earth-rock-fill dam by overtopping flow

Breaking tests on homogeneous earth-rock-fill dams destroyed by overtopping flow are presented. Two types of shear erosion are found: wetting shear erosion and quick shear erosion; the water level-discharge process is divided into “sharp rise and drop of flow” and “slow change of flow” types. Furthermore, overtopping break modes are divided into head-cut erosion and scour breaching mode (Mode 1), shear erosion and collapse breaching mode (Mode 2), and wetting shear erosion mode (Mode 3) based on the main failure types and their coupled mode during dam break. In Mode 1, the downstream slope encounters head-cut erosion at the onset of the breach and expands and undercuts gradually at the development stage; in Mode 2, the dam slope encounters rapid shear erosion and the downstream edge of the crest erodes quickly towards the upstream face at the onset of breach: the breach expands suddenly due to instability and collapse at both sides of the breach in its development stage; in Mode 3, the strength of the dam’s materials continuously decreases by wetting and erosion happens is localised at positions where wetting caused the most strength loss, no obvious breach was developed. Dam breaking time, dam-break flow process, and the maximum discharge flow varied for each breaking mode. Overtopping flow size, materials, height, and initial breach size of dam are important factors influencing breaking mode, by virtue of their changing the relative strength of the relationship between the critical shear stress of dam materials at the edge of the dam crest and the lower parts of its slope, and the given flow’s destruction capacity. Overtopping will cause different manifestations of damage to be exhibited, so modal classification is favourable for safety assessment and preparation of relevant protective measures for protection of earth-rock-fill dam against overtopping.     

Landslide-dammed lake at Tangjiashan,Sichuan province,China (triggered by the Wenchuan Earthquake,May 12, 2008): risk assessment,mitigation strategy,and lessons learned

Landslides and rock avalanches triggered by the 2008 Wenchuan Earthquake produced 257 landslide dams, mainly situated along the eastern boundary of the Qinghai-Tibet Plateau where rivers descend approximately 3,000 m into the Sichuan Basin. The largest of these dams blocked the Tongkou River (a tributary of the Fujiang River) at Tangjiashan. The blockage, consisting of 2.04 × 10⁷ m³ of landslide debris, impounded a lake with a projected maximum volume of 3.15 × 10⁸ m³, potentially inundating 8.92 km² of terrain. Its creation during the rainy season and the possibility of an uncontrolled release posed a serious, impending threat to at least 1.3 million people downstream that could add substantially to the total of 69,200 individuals directly killed by the earthquake. Risk assessment of the blockage indicated that it was unlikely to collapse suddenly, and that eventual overtopping could be mitigated by notching the structure in order to create an engineered breach and achieve safe drainage of the lake. In addition to the installation of monitoring and warning instrumentation, for emergency planning we estimated several outburst scenarios equivalent to 20, 25, 33, and 50% of the dam failing suddenly, creating, respectively, 3.35, 3.84, 4.22, and 4.65 km² of flooded area, and overbank water depths of 4.6, 5.1, 5.7, and 6.2 m, respectively, in Mianyang, the second largest city in Sichuan Province, 48 km downstream from the blockage. Based on these scenarios, recommendations and plans for excavating a sluiceway, draining the lake, and downstream evacuation were proposed and later were implemented successfully, with the blockage breached by overtopping on June 10, less than a month after dam emplacement. The peak discharge of the release only slightly exceeded the flood of record at Mianyang City. No lives were lost, and significant property damage was avoided. Post-breaching evaluation reveals how future similar mitigation can be improved. Although initial breach erosion was slow, later erosion was judged uncontrollably rapid; increased slope of the engineered channel and adoption of a compound, trapezoid–triangular cross-section can be considered, as can other measures to control the rate of breach incision. Evacuees from Mianyang City spent an unnecessarily long time (12 days) in temporary settlements; more precise risk management planning can reduce this time in the future.     

Morphological analysis and features of the landslide dams in the Cordillera Blanca,Peru

Global warming in high mountain areas has led to visible environmental changes as glacial retreat, formation and evolution of moraine dammed lakes, slope instability, and major mass movements. Landslide dams and moraine dams are rather common in the Cordillera Blanca Mountains Range, Peru, and have caused large damages and fatalities over time. The environmental changes are influencing the rivers’ and dams’ equilibrium, and the potential induced consequences, like catastrophic debris flows or outburst floods resulting from dam failures, can be major hazards in the region. The studies of past landslide dam cases are essential in forecasting induced risks, and specific works on this topic were not developed in the study region. Reflecting this research gap, a database of 51 cases and an evolution study of landslide dams in the Cordillera Blanca Mountains is presented. The main morphometric parameters and information of the landslide, the dam body, the valley, and the lake, if any, have been determined through direct and indirect survey techniques. Low variability in some of the main morphometric parameter distributions (valley width and landslide volume) has been shown, most likely due to an environmental control connected to the regional tectonic and glacial history. In order to analyze present and future landslide dam evolution, a morphological analysis was carried out using two recently developed geomorphological indexes employed on the Italian territory. The results of the Cordillera Blanca analysis have been compared with a large Italian landslide dam inventory, highlighting as much the differences as the similarities between the two datasets. The long-term geomorphological evolution changes are evaluated. Many of the stable dams are in disequilibrium with their surrounding environment and their classification result is of “uncertain determination.”     

Rainfall-related debris flows in Carhuacocha Valley, Cordillera Huayhuash, Peru

Continuous heavy rainfall hit northern Peru in the second half of the 2008/2009 summer season. From the end of January to the beginning of March, the Cordillera Huayhuash experienced abnormally high precipitations that exceeded 270?mm. The antecedent rainfall, aggravated with a severe rainstorm of 20?mm on March 7 triggered a large debris flow in the upper Carhuacocha Valley early in the morning on March 8. The debris flow interrupted drainage from the upper part of the valley damming a lake in the narrow depression between the trough slope and the lateral moraine. As a result of the drainage interruption, water percolated through the moraine dam of Cangrajanca Lake where a secondary mass movement occurred in its inner slope. In September 2009, we mapped the debris flow and related landforms and estimated the total area and volume of both mass movements using geodetic measurements. About 104,000?m³ of sediments was moved from the trough slope towards the moraine from which 534,000?m³ flowed to Cangrajanca Lake subsequently. We analysed the rainfall conditions that triggered the debris flow using rainfall data from the nearby stations. We also compared the precipitation preceding the event with the rainfall thresholds for debris flow initiation.     

Stability of landslide dams and development of knickpoints

The Wenchuan earthquake triggered many landslides and numerous avalanches and created 100 odd quake lakes. The quake lakes may be removed or preserved. The removal strategy was applied to several large landslide dams, which were dangerous because massive amounts of water pooled up in the quake lakes. The dams could eventually fail under the action of dam outburst flooding, potentially endangering the lives of people in the downstream reaches. This paper studied the stability of landslide dams and the development of knickpoints by field investigations and experiments, and analyzing satellite images. The study concluded that if landslide dams were preserved, they would develop into knickpoints and act as a primary control of riverbed incision and, thus, reduce the potential of new landslide. The stability of landslide dams depends mainly on the development of the step-pool system and stream power of the flood flow. If a landslide dam consists of many boulders, a step-pool system may develop on the spillway channel of the dam, which would maximize the resistance, consume most of the flow energy and consequently protect the dam from incision. The development degree of the step-pool system is represented by a parameter S _p, which was measured with a specially designed instrument. A preservation ratio of landslide dams is defined as the ratio of preserved height after flood scouring to the original height of the dam. For streams with peak flood discharge lower than 30 m³/s, the preservation ratio is linearly proportional to S _p. For rivers with a peak flood discharge higher than 30 m³/s (30–30,000 m³/s), the minimum S _p value for stable channel increases with log p, in which p is the unit stream power. For a landslide dam with a poorly developed step-pool system, S _p is smaller than the minimum value and the outburst flood incises the spillway channel and causes failure of the dam. For preserved landslide dams, sediment deposits in the quake lakes. A landslide dam may develop into a knickpoint if it is stabilized by long-term action of the flow. Large knickpoints can totally change the fluvial processes and river morphology. Uplift of the Qinghai–Tibetan Plateau has caused extensive channel bed incision along almost all rivers. For many rivers, the incision has been partly controlled by knickpoints. Upstream reaches of a knickpoint have a new and unchanging base level. This brings about a transition from degradation to aggradation and from vertical bed evolution to horizontal fluvial process. Multiple and unstable channels are prominent in the reaches, upstream of the knickpoints. If hundreds of landslide dams occurred simultaneously on a reach of a mountain river, the potential energy of bank failure and the slope erosion would be greatly reduced and sediment yield from the watershed may be reduced to nearly zero. The quake lakes may be preserved long term and become beautiful landscapes. Streams with long-term unfilled quake lakes have good aquatic ecology.     

粘土心墙坝漫顶溃坝过程离心模型试验与数值模拟

利用作者研制成功的溃坝离心模型试验系统,对粘土心墙坝漫顶溃决过程进行了试验研究,结果发现粘土心墙坝与均质坝溃决机理与溃口发展规律明显不同,随着漫坝水流对下游坝壳冲蚀程度的增加,粘土心墙发生剪断破坏,溃口洪水流量迅速增大.基于上述试验结果,提出了一个描述粘土心墙坝漫顶溃坝过程的数学模型,并建议了相应的数值计算方法.该模型...