An assessment of metal contamination in coastal sediments of the Caspian Sea

An assessment of marine pollution due to metals was made in the Caspian Sea based on coastal sediment collected in Azerbaijan, Iran, Kazakhstan, Russia and Turkmenistan. Despite the high carbonate content, the distribution of most metals was largely controlled by terrigenous inputs. Several metals (As, Cr, Ni) exhibited concentrations that exceed sediment quality guidelines. Such metals have a high natural background but anthropogenic activities, notably mining, may further enhance concentrations. This would explain hot spots for Cu and Zn in Azerbaijan and Iran, and Cr at the mouth of the Ural River in Kazakhstan. Contamination by Hg was observed to the south of Baku Bay, Azerbaijan. Some anomalously high concentrations of Ba in the central Caspian are probably from offshore drilling operations, but the elevated U concentrations (up to 11.1 microg g(-1)) may be natural in origin. Several metals (Ag, Cd, Pb) have relatively low levels that pose no environmental concerns.     

Assessment of metal contamination in surface sediments from Zhelin Bay,the South China Sea

Metals and biogenic elements were analyzed from surface sediments collected from Zhelin Bay in the South China Sea in December 2008. The high concentrations of TOC, TN and BSi indicate the high nutrient level and diatom productivity in Zhelin Bay. The concentrations of metals were generally far lower than the effects-range-low (ERL) values that define pollutant levels. Enrichment factors (EF) and geoaccumulation indices (I_geo) suggest there are pollution levels of Cd, Cu and Zn at some stations. As, Cu, and Pb are potentially biotoxic in some stations. Correlation and principal component analyses indicate that most of the metals primarily originate from natural sources, and from maricultural activities as well. Mariculture contributes considerable Cd and Cu contamination. As and Pb comes primarily from combustion of gasoline and diesel fuel by ships.     

Heavy metal contamination in western Xiamen Bay sediments and its vicinity, China

Concentrations of selected heavy metals (Cu, Pb, Zn, Cd, Cr, Ni and Fe) in surface sediments from nine sites in western Xiamen Bay and its vicinity were studied in order to understand current metal contamination due to urbanization and economic development in Xiamen, China. The sediment samples were collected in December 2004 and July 2005 respectively in order to examine temporal variations. In this study, we found that heavy metal concentrations in surface sediments sampled in the western Xiamen Bay and adjacent Maluan Bay and Yuandang Lagoon varied from 19 to 97mg kg(-1) for Cu, 45 to 60mg kg(-1) for Pb, 65 to 223mg kg(-1) for Zn, 0.11 to 1.01mg kg(-1) for Cd, 37 to 134mg kg(-1) for Cr, 25 to 65mg kg(-1) for Ni and 3.08 to 4.81% for Fe. Although all metal concentrations in sediments meets Chinese National Standard Criteria for Marine Sediment Quality, both metal enrichment factors (EF) and geoaccumulation index (I(geo)) show that Pb contamination exists in the entire study area and contamination of other metals are also present in some locations depending on the sources, of which sewage outlets and commercial ports are the main sources of contaminants to the area. This study shows that using the sediment quality standard criteria only to assess sediments cannot properly reflect sediment contamination. A multiple approaches should be applied for the sediment quality assessment.     

Distribution,fractionation, and contamination assessment of heavy metals in offshore surface sediments from western Xiamen Bay,China

Surface sediment samples were collected at 21 offshore sites in western Xiamen Bay, Southeast China.Total concentrations of Li, V, Cr, Co, Ni, Cu, Zn, Sr, Mn,Pb, Ba, Fe, and Ti were determined by inductively coupled plasma-optical emission spectrometry; Hg was determined by atomic fluorescence spectrometry. A modified BCR sequential extraction procedure was used to extract fractions of the above elements. Concentrations of Pb, Cr, and Hg at most sites met the primary standard criteria of Marine Sediment Quality except site S12 for Pb and S7 for Cr, while concentrations of Zn at 17 sites and Cu at seven sites exceeded the criteria. The mean concentration of Hg was three times higher than the background, with a possible source being the Jiulong River. Fe, Ti, Ba, Co, V, and Li dominated the residual phase, mainly from terrestrial input.Ni, Cr, Pb, and Hg in the non-residual phase varied largely between sites. Sr, Mn, Cu, and Zn were mainly in the nonresidual fraction. Most sites showed considerable ecological risk; exceptions were site S7(very high) and sites S10,S11, and S14(moderate). Cu showed moderate-to-high pollution and Pb exhibited no-to-low pollution, while other metals had a non-pollution status according to their ratios of secondary phase to primary phase(RSP). Results of two assessment methods showed moderate pollution and a veryhigh ecological risk for Cu, Zn, Ni, and Cr at site S7, which might be due to the local sewage treatment plant.     

Spatial and temporal variations of heavy metal contamination in sediments of a mangrove swamp in Hong Kong

Spatial and temporal variations of heavy metal contamination in sediments of a small mangrove stand in Hong Kong were examined by laying two transects perpendicular across the shore. Surface sediment samples were taken along the two transects running landward to seaward at intervals of 5 or 10 m during December 1989, and March, July and September 1990. Total concentrations of Cu, Zn, Mn and Pb did not show any specific trend along each transect, although the maximum concentration of heavy metals tended to occur at the landward edge. There was a high level of variability among locations within each transect; for instance, the Cu concentrations fluctuated from 1 to 42 μg g⁻¹. Certain sites contained exceptionally high levels of total metals. Total concentrations of Cu, Zn, Mn and Pb as high as 42, 150, 640 and 650 μg g⁻¹, respectively, were recorded, implying contaminated sediment. A comparison of the two transects indicated that the sediments of Transect B seemed to contain higher total Zn but lower Cu and Mn concentrations than those of Transect A. Most of the heavy metals accumulated in the sediments were not extractable with ammonium acetate and no Cu or Pb was detected in these extracts. The concentrations of extractable Zn and Mn were low, less than 10% of the total metal concentration in the sediment, and appeared to decrease from the landward to seaward samples. For both total and extractable metals, there were significant seasonal fluctuations for both transects, but no specific trends could be identified. These spatial and temporal variations suggest that the scale and representativeness of sampling require careful planning, and a single sample might not give a satisfactory evaluation of the levels of heavy metal contamination in mangrove ecosystems.     

Heavy metal pollution and assessment in the tidal flat sediments of Haizhou Bay,China

The heavy metal inventory and the ecological risk of the tidal flat sediments in Haizhou Bay were investigated. Results show that the average concentrations of heavy metals in the surface sediments exceeded the environment background values of Jiangsu Province coastal soil, suggesting that the surface sediments were mainly polluted by heavy metals (Cd, Cr, Cu, Mn, Pb and Zn). In addition, the profiles of heavy metals fluxes can reflect the socio-economic development of Lianyungang City, and heavy metals inputs were attributed to anthropogenic activities. Cr, Cu, Pb and Zn were mainly present in the non-bioavailable residual form in surface sediments, whereas Cd and Mn were predominantly in the highly mobile acid soluble and reducible fractions. The ecological risk of the polluted sediments stemmed mainly from Cd and Pb. According to the Sediment quality guidelines (SQGs), however, the adverse biological effects caused by the heavy metals occasionally occurred in tidal flat.     

Heavy metal contamination and ecological risk in Spartina alterniflora marsh in intertidal sediments of Bohai Bay,China

To investigate the effects of Spartina alterniflora on heavy metals pollution of intertidal sediments, sediment cores of a S. alterniflora salt marsh and a mudflat in Bohai Bay, China were analyzed. The results showed that S. alterniflora caused higher total C and P, but lower bulk density and electrical conductivity. The levels of Cd, Cu and Pb were higher in S. alterniflora sediment. Both Cd and Zn were higher than the probable effect level at both sites, indicating their toxicological importance. The geo-accumulation and potential ecological risk indexes revealed higher metal contamination in S. alterniflora sediment. Multivariate analysis implied that anthropogenic activities altered mobility and bioavailability of heavy metals. The percentage of mobile heavy metals was higher in S. alterniflora sediment, indicating improvement of conversion from the immobilized fraction to the mobilized fraction. These findings indicate that S. alterniflora may facilitate accumulation of heavy metals and increase their bioavailability and mobility.     

Heavy metal contamination in surface sediments from the Gulf of Venice, Italy

The authors studied surface sediments from 102 stations in four areas of the three port entrances to the Lagoon of Venice, examining the relationships between textural character, mineralogical composition, and Hg, Pb, Cd, Cu, Ni, Cr, Zn, Co and Fe content. Heavy metal distribution allowed boundaries to be fixed between polluted and nonpolluted zones. While the Cavallino area is not polluted, very high concentrations of Zn, Pb and Hg in the two central areas, facing the Lido and Malamocco port entrances, respectively, suggest that wastes mainly from industrial production of zinc are present. High concentrations of Cr in the southern part of the Chioggia area are probably due to tannery wastes reaching the sea from the Brenta river.     

Evaluation of metal contamination in coastal sediments of the Bay of Bengal, India: geochemical and statistical approaches

Surface sediment samples collected from the inner shelf region of the Bay of Bengal, were analysed for the major elements and total and acetic acid available trace elements (Al, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Si, Zn) to evaluate geochemical processes influencing their distribution. Major elemental analysis showed that the sediments had high concentrations of Si and relatively low concentrations of Al and Fe. Both major elemental and trace metal concentrations indicated that the sediments represent weathered products of granite and charnockite. Normalization of metals to Al indicated relatively high enrichment factors for Pb, Cd, Zn and Cr. The higher proportions of nondetrital Pb (66%), Cd (41%) and Co (28%) reveal metal contamination due to anthropogenic inputs. Factor analysis (FA) identified six possible types of sedimentological and geochemical associations. The dominant factor accounting for 26.9% of the total variance identifies an anthropogenic input and accumulation of nondetrital Cd, Co, Cr, Ni and Pb. Association of these metals with CaCO3 reveals that shell fragments in the surface sediments are likely act as a carrier phase for nondetrital metals. The results are discussed in the context of the sources and pathways of elements in the Bay of Bengal.     

Trace metal retention in mangrove ecosystems in Guanabara Bay,SE Brazil

Along contrasting environmental conditions (e.g., degree of trace metal contamination and mangrove forest structural development), sediments of Laguncularia racemosa-dominated mangrove stands in Guanabara Bay (SE Brazil) presented a trend of trace metal accumulation in forms with low potential of remobilization and biotic uptake. Concurrently, a relatively low transfer of sediment-bound metals to L. racemosa leaves was observed, which may moderate the metal export from the forests via leaf litter transport and the metal availability to enter in food chains based on leaf consumption.     

Mapping benthic faunal communities in the shallow and deep sediments of Las Perlas Archipelago, Pacific Panama

Las Perlas Archipelago (LPA) is located off the Pacific Coast of Panama and was designated as a marine protected area (MPA) in 2007. This baseline study of the shallow and deeper sedimentary habitats of the islands partly informed the MPA designation. Ninety-two grab stations and twenty trawl stations were sampled. Sediment grab sample results were interpolated to produce a map that showed the area to be dominated by mud (1246 km², 40%) and sand/shell sediments (780 km², 25%). A total of 201 taxa were recorded and over 5800 individual specimens were processed, revealing that the sediments hold varying community compositions, with annelids being the dominant group (73%) followed by crustaceans (14%). Relationships were evident between community, feeding guilds, and sediment types, which give an indication of communities that can be expected in similar sediments in other areas of the Tropical Eastern Pacific. A study of this scale and level of detail is rare for this biogeographic region and provides a valuable, comprehensive appreciation of the LPA’s benthos.     

PAHs contamination and bacterial communities in mangrove surface sediments of the Jiulong River Estuary, China

Sixteen sediment samples collected from eight transects in a mangrove swamp of the Jiulong River Estuary, Fujian, China were investigated for their content of polycyclic aromatic hydrocarbons (PAHs) and the biodegradation potential of the indigenous microorganisms. The bacterial community structures in the mangrove sediments and in enrichment cultures were also investigated. The results showed that the total PAHs concentration of mangrove sediments ranged from 280 to 1074 ng g(-1) dry weight, that the PAHs composition pattern in the mangrove sediments was dominated by high molecular weight PAH components (4-6 rings), and that Benzo[ghi]perylene and Indeno[1,2,3-cd]pyrene were the most dominant at different stations. Abundant PAH-degrading bacteria were found in all the stations, the values of phenanthrene-degrading bacteria ranged from 5.85 x 10(4) to 7.80 x 10(5) CFU g(-1) dry weight, fluoranthene-degrading bacteria ranged from 5.25 x 10(4) to 5.79 x 10(5) CFU g(-1) dry weight, pyrene-degrading bacteria ranged from 3.10 x 10(4) to 6.97 x 10(5) CFU g(-1) dry weight and the benzo(a)pyrene-degrading bacteria ranged from 5.25 x 10(4) to 7.26 x 10(5) CFU g(-1) dry weight. DGGE analysis of PCR-amplified 16S rDNA gene fragments confirmed that there was a remarkable shift in the composition of the bacterial community due to the addition of the different model PAH compound phenanthrene (three ring PAH), fluoranthene(four ring PAH), pyrene(four ring PAH) and benzo(a)pyrene(five ring PAH) during enrichment batch culture. Eleven strains were obtained with different morphology and different degradation ability. The presence of common bands for microbial species in the cultures and in the native mangrove sediment DNA indicated that these strains could be potential in situ PAH-degraders.     

PAHs contamination and bacterial communities in mangrove surface sediments of the Jiulong River Estuary,China

Sixteen sediment samples collected from eight transects in a mangrove swamp of the Jiulong River Estuary, Fujian, China were investigated for their content of polycyclic aromatic hydrocarbons (PAHs) and the biodegradation potential of the indigenous microorganisms. The bacterial community structures in the mangrove sediments and in enrichment cultures were also investigated. The results showed that the total PAHs concentration of mangrove sediments ranged from 280 to 1074 ng g⁻¹ dry weight, that the PAHs composition pattern in the mangrove sediments was dominated by high molecular weight PAH components (4–6 rings), and that Benzo[ghi]perylene and Indeno[1,2,3-cd]pyrene were the most dominant at different stations. Abundant PAH-degrading bacteria were found in all the stations, the values of phenanthrene-degrading bacteria ranged from 5.85 × 10⁴ to 7.80 × 10⁵ CFU g⁻¹ dry weight, fluoranthene-degrading bacteria ranged from 5.25 × 10⁴ to 5.79 × 10⁵ CFU g⁻¹ dry weight, pyrene-degrading bacteria ranged from 3.10 × 10⁴ to 6.97 × 10⁵ CFU g⁻¹ dry weight and the benzo(a)pyrene-degrading bacteria ranged from 5.25 × 10⁴ to 7.26 × 10⁵ CFU g⁻¹ dry weight. DGGE analysis of PCR-amplified 16S rDNA gene fragments confirmed that there was a remarkable shift in the composition of the bacterial community due to the addition of the different model PAH compound phenanthrene (three ring PAH), fluoranthene(four ring PAH), pyrene(four ring PAH) and benzo(a)pyrene(five ring PAH) during enrichment batch culture. Eleven strains were obtained with different morphology and different degradation ability. The presence of common bands for microbial species in the cultures and in the native mangrove sediment DNA indicated that these strains could be potential in situ PAH-degraders.     

Toxicological impact assessment of heavy metal contamination on macrobenthic communities in southern coastal sediments of Korea

In the heavily industrialized Masan Bay of southern coast, Korea, the potential harmful effects of heavy metals (Cd, Co, Cu, Ni, Pb, Sn, Zn, and Hg) were evaluated in terms of the pollution load index (PLI) and ecological risk assessment index (ERI) methods, and the results obtained were considered alongside the health of the macrobenthic fauna communities. The results revealed that the bay sediments, especially in the inner bay and the outfall area of a sewage treatment plant, are exposed to moderate to serious levels of metal pollution. Hg and Cd contributed the most to the potential toxicity response indices in sediments recently deposited in the bay. The potential ecological risk assessment of heavy metals in the bay was highlighted by the use of the benthic biological pollution index (BPI), suggesting that the ERI is a useful toxicity response index, which can quantify the overall ecological risk level to a target environment.     

Anthropogenic metal contamination and sapropel imprints in deep Mediterranean sediments

Sediment cores from the deep Balearic basin and the Cretan Sea provide evidence for the accumulation of Cd, Pd and Zn in the top few centimeters of the abyssal Mediterranean sea-bottom. In both cores, 206Pb/207Pb profiles confirm this anthropogenic impact with less radiogenic imprints toward surface sediments. The similarity between excess 210Pb accumulated in the top core and the 210Pb flux suggests that top core metal inventories reasonably reflect long-term atmospheric deposition to the open Mediterranean. Pb inventory in the western core for the past 100 years represents 20-30% of sediment coastal inventories, suggesting that long-term atmospheric deposition determined from coastal areas has to be used cautiously for mass balance calculations in the open Mediterranean. In the deeper section of both cores, Al normalized trace metal profiles suggest diagenetic remobilization of Fe, Mn, Cu and, to a lesser extent, Pb that likely corresponds to sapropel event S1.     

Influence of mangrove reforestation on heavy metal accumulation and speciation in intertidal sediments

To investigate the influence of mangrove reforestation on heavy metal accumulation and speciation in intertidal sediments, core sediments from a restored mangrove forest and adjacent mud flat in Yifeng Estuary (southeastern China) were analyzed. The chemical speciation of heavy metals (Pb, Zn, Cu, Cr and Ni) was determined according to a sequential extraction procedure. Special attention was paid to the upper 20 cm of sediment, in which metal accumulation was enhanced and speciation was obviously modified. Mangrove reforestation decreased the concentrations of all metals in the acid-soluble fraction and increased metal concentrations in the oxidizable fraction. Increased Pb, Zn and Cu concentrations and decreased Ni and Cr concentrations were observed in the reducible fraction. These results suggest that mangrove reforestation facilitated the accumulation of heavy metals in the upper sediment layers but decreased their bioavailability and mobility.