Using multi-polarization C- and L-band synthetic aperture radar to estimate biomass and soil moisture of wheat fields

Biomass and soil moisture are two important parameters for agricultural crop monitoring and yield estimation. In this study, the Water Cloud Model (WCM) was coupled with the Ulaby soil moisture model to estimate both biomass and soil moisture for spring wheat fields in a test site in western Canada. This study exploited both C-band (RADARSAT-2) and L-band (UAVSAR) Synthetic Aperture Radars (SARs) for this purpose. The WCM-Ulaby model was calibrated for three polarizations (HH, VV and HV). Subsequently two of these three polarizations were used as inputs to an inversion procedure, to retrieve either soil moisture or biomass without the need for any ancillary data. The model was calibrated for total canopy biomass, the biomass of only the wheat heads, as well as for different wheat growth stages. This resulted in a calibrated WCM-Ulaby model for each sensor-polarization-phenology-biomass combination. Validation of model retrievals led to promising results. RADARSAT-2 (HH-HV) estimated total wheat biomass with root mean square (RMSE) and mean average (MAE) errors of 78.834 g/m² and 58.438 g/m²; soil moisture with errors of 0.078 m³/m³ (RMSE) and 0.065 m³/m³ (MAE) are reported. During the period of crop ripening, L-band estimates of soil moisture had accuracies of 0.064 m³/m³ (RMSE) and 0.057 m³/m³ (MAE). RADARSAT-2 (VV-HV) produced interesting results for retrieval of the biomass of the wheat heads. In this particular case, the biomass of the heads was estimated with accuracies of 38.757 g/m² (RSME) and 33.152 g/m² (MAE). For wider implementation this model will require additional data to strengthen the model accuracy and confirm estimation performance. Nevertheless this study encourages further research given the importance of wheat as a global commodity, the challenge of cloud cover in optical monitoring and the potential of direct estimation of the weight of heads where wheat production lies.     

利用AMSR2和MODIS数据的土壤冻融相变水量降尺度方法

本文基于站点实测土壤温度和土壤湿度数据分析,发现温度指数TI(Temperature Index)和土壤冻融相变水量呈现幂函数关系,温度指数能够反映相变水量的变化。使用MODIS地表温度产品计算温度指数,在AMSR2卫星观测尺度上与相变水量建立了关系,从而对土壤冻融相变水量进行了降尺度研究。采用CTP-SMTMN数据采集仪观测网络上的站点观测到土壤水分对土壤冻融相变水量降尺度结果进行了验证。结果表明,土壤冻融相变水量降尺度结果与实测值较为接近,在土壤相变水量大于0.01(m³/m³)时,RMSE为0.0085(m³/m³),MAE为0.0059(m³/m³)。这种通过温度指数对土壤相变水量进行降尺度的方法具有简便,可行,可靠的优势,适合在冻融交替期计算较湿润土壤在冻融过程中产生的相变水量。同时,这种降尺度方法能够生成小尺度上的相变水量产品,实现了热红外遥感和被动微波遥感的优势整合,对研究地气水热平衡,气候变化,土壤冻结强度以及冻融侵蚀强度等具有重要意义。     

Estimation of Partial Pressure of Carbon Dioxide and Air-Sea Fluxes in Hooghly Estuary Based on In Situ and Satellite Observations

An empirical model is developed and used with remotely sensed predictors: sea surface temperature (SST) and chlorophyll-a concentration (Chl-a), to compute surface water partial pressure of carbon dioxide (pCO_2w) and air-sea fluxes of CO₂ in the Hooghly estuary and its adjacent coastal oceans. In situ observations used here were based on measurements carried out in this region during winter and summer periods in 2008. The estimated pCO_2w compares well with the in situ observations at root mean square error ±18 μatm. In winter, estimated pCO_2w ranges between 320 and 500 μatm with large values (>400 μatm) on the south-western and south-eastern flanks of the coastal domain and lower values (340–375 μatm) on the main-channel. In summer, it remained spatially uniform at 450 μatm. Extrapolation of the results over the study region based on the Moderate Imaging Specroradiometer (MODIS) measured SST and Chl-a suggests that the region is a strong source of atmospheric CO₂ during the summer with net release of 0.095 Tg C year^?1 (equivalent to mean flux of 90 molC m^?2 year^?1) and is a weak source during the winter with net release of 0.006 Tg C yr^?1 (0.5 molC m^?2 year^?1) from the geographical extent of 6000 Km² area.     

Remote leveling of tide gauges using GNSS reflectometry: case study at Spring Bay,Australia

We further developed a new approach using GNSS reflectometry to determine the leveling connection between a tide gauge and a GNSS antenna. This approach includes the optimization of the unknown receiver bandwidth and the estimation of frequency changes in the signal-to-noise ratio (SNR) oscillation through an extended Kalman filter/smoother algorithm. We also corrected the geometric bending of the GNSS signals due to tropospheric refraction using local meteorological observations. Using 3 weeks of SNR data in Spring Bay, Australia, from a GNSS antenna placed sideways (i.e., ground plane orientated vertically and directed in azimuth toward the sea surface) to improve the SNR interference near the horizon, we obtained mean leveling differences of approximately 5 mm, with an RMS of approximately 3 cm level with respect to the nominal leveling from classical surveying techniques. SNR data from three different receiver manufacturers, coupled to the same antenna, provided similar leveling results. With a second antenna in the usual upright configuration, we obtained mean leveling differences of 1–2 cm and a RMS of about 10 cm. In the upright configuration, the leveling differences may include errors in the GNSS antenna phase center calibration, which are avoided in our technique but not in the classical surveying techniques. These results demonstrate the usefulness of the reflectometry technique to obtain precisely and remotely the leveling between a GNSS antenna and a tide gauge. In addition, this technique can be applied continuously, providing an independent and economical means to monitor the stability of the tide gauge zero.     

Ionospheric tomography based on GNSS observations of the CMONOC: performance in the topside ionosphere

This study carries out a quantitative analysis of the performance of ionospheric tomography in the topside ionosphere, utilizing data of October 2011 collected from 260 Global Navigation Satellite System (GNSS) stations in the Crustal Movement Observation Network of China. This tomographic reconstruction with a resolution of 2° in latitude, 2° in longitude and 20 km in altitude has more than 70 % of voxels traversed by GPS raypaths and is able to provide reliable bottom parts of ionospheric profiles. Compared with the observations measured by the Defense Meteorological Satellite Program (DMSP) satellites (F16, F17 and F18) at an altitude of 830–880 km, the results show that there is an overestimation in the reconstructed plasma density at the DMSP altitude, and the reconstruction is better during daytime than nighttime. In addition, the reconstruction at nighttime also indicates a solar activity and latitudinal dependence. In summary, with respect to DMSP measurements, the daytime bias is on average from ?0.32 × 10⁵/cm³ to ?0.28 × 10⁵/cm³, while the nighttime bias is between ?0.37 × 10⁵/cm³ and ?0.24 × 10⁵/cm³, and the standard deviation at daytime and at nighttime is, respectively, 0.082 × 10⁵/cm³ to 0.244 × 10⁵/cm³ and 0.086 × 10⁵/cm³ to 0.428 × 10⁵/cm³. This study suggests that vertical ionospheric profiles from other sources, such as ionosondes or GNSS occultation satellites, should be incorporated into ground-based GNSS topside tomographic studies.     

Spatial Assessment of Soil Organic Carbon Density Through Random Forests Based Imputation

Regional estimates of soil carbon pool have been made using various approaches that combine soil maps with sample databases. The point soil organic carbon (SOC) densities are spatialized employing approaches like regression, spatial interpolation, polygon based summation, etc. The present work investigates a data mining based spatial imputation for spatial assessment of soil organic carbon density. The study area covers Andhra Pradesh and Karnataka states of India. Field sampling was done using stratified random sampling method with land cover/use, soil type, agro-ecological regions for defining strata. The spatial data at 1 km resolution on climate, NDVI, land cover, soil type, topography was used as input for modeling the top 30 cm Soil Organic Carbon (SOC) density. To model the SOC density, a Random Forest (RF) based model with optimal parameters and input variables has been adopted. Experiment results indicate that 500 number of trees with 5 variables at each split could explain the maximum variability of soil organic carbon density of the study area. Out of various input variables used to model SOC density, land use / cover was found to be the most significant factor that influences SOC density with a distinct importance score of 34.7 followed by NDVI with a score of 12.9. The predicted mean SOC densities range between 2.22 and 13.2 Kg m^?2 and the estimated pool size of SOC in top 30 cm depth is 923 Tg for Andhra Pradesh and 1,029 Tg for Karnataka. The predicted SOC densities using this model were in good agreement with the measured observations (R?=?0.86).     

Intercomparison of two trapezoid-based soil moisture downscaling methods using three scaling factors

This paper compared two soil moisture downscaling methods using three scaling factors. Level 3 soil moisture product of advanced microwave scanning radiometer for EOS (AMSR-E) is downscaled from 25 to 1?km. The downscaled results are compared with the soil moisture observations from polarimetric scanning radiometer (PSR) microwave radiometer and field sampling. The results show that (1) the scaling factor of normalized soil thermal inertia (NSTIs) and vegetation temperature condition index (VTCI) are better than soil evaporative efficiency in reflecting soil moisture; (2) for method 1, NSTIS is the best in the downscaling of soil moisture. For method 2, VTCI is the best; (3) no significant differences of the correlation coefficients (R²) and the biases were found between the two methods for the same scaling factors. However, method 2 shows a better potential than method 1 in the time-series applications of the downscaling of soil moisture; (4) compared with the relationship between the area-averaged soil moisture of AMSR-E and that of PSR, R² of the 6 sets of the downscaled soil moisture almost do not decrease, which suggests the validity of the downscaling of soil moisture with the two downscaling methods using the three scaling factors.     

Pasture enclosures increase soil carbon dioxide flux rate in Semiarid Rangeland,Kenya

Background

Pasture enclosures play an important role in rehabilitating the degraded soils and vegetation, and may also influence the emission of key greenhouse gasses (GHGs) from the soil. However, no study in East Africa and in Kenya has conducted direct measurements of GHG fluxes following the restoration of degraded communal grazing lands through the establishment of pasture enclosures. A field experiment was conducted in northwestern Kenya to measure the emission of CO₂, CH₄ and N₂O from soil under two pasture restoration systems; grazing dominated enclosure (GDE) and contractual grazing enclosure (CGE), and in the adjacent open grazing rangeland (OGR) as control. Herbaceous vegetation cover, biomass production, and surface (0–10 cm) soil organic carbon (SOC) were also assessed to determine their relationship with the GHG flux rate.

Results

Vegetation cover was higher enclosure systems and ranged from 20.7% in OGR to 40.2% in GDE while aboveground biomass increased from 72.0 kg DM ha^?1 in OGR to 483.1 and 560.4 kg DM ha^?1 in CGE and GDE respectively. The SOC concentration in GDE and CGE increased by an average of 27% relative to OGR and ranged between 4.4 g kg^?1 and 6.6 g kg^?1. The mean emission rates across the grazing systems were 18.6 μg N m^?2 h^?1, 50.1 μg C m^?2 h^?1 and 199.7 mg C m^?2 h^?1 for N₂O, CH₄, and CO₂, respectively. Soil CO₂ emission was considerably higher in GDE and CGE systems than in OGR (P?<?0.001). However, non-significantly higher CH₄ and N₂O emissions were observed in GDE and CGE compared to OGR (P?=?0.33 and 0.53 for CH₄ and N₂O, respectively). Soil moisture exhibited a significant positive relationship with CO₂, CH₄, and N₂O, implying that it is the key factor influencing the flux rate of GHGs in the area.

Conclusions

The results demonstrated that the establishment of enclosures in tropical rangelands is a valuable intervention for improving pasture production and restoration of surface soil properties. However, a long-term study is required to evaluate the patterns in annual CO₂, N₂O, CH₄ fluxes from soils and determine the ecosystem carbon balance across the pastoral landscape.

     

GNSS信号土壤衰减模型的试验验证方法

GNSS（global navigation satellite system）信号在土壤中的衰减情况对于研究GNSS反射信号的有效遥感深度具有重要意义。本文通过试验研究了北斗信号与GPS（global positioning system）信号在土壤中的衰减情况。在试验设计上将GNSS天线置入土壤中并不断改变天线上方的土壤厚度与湿度以采集GNSS信号的功率衰减数据,最后利用这些数据反演土壤湿度以对GNSS信号土壤衰减模型进行验证。试验结果表明,土壤能够使GNSS信号发生明显的衰减。土壤的湿度值与厚度值越大,GNSS信号功率衰减越严重。在黏土土质,土壤湿度为0.15~0.30 cm³/cm³的情况下,当土壤厚度达到21 cm时,GNSS信号功率已衰减至无法被GNSS接收机测出。进一步根据GNSS信号衰减模型反演土壤湿度,结果显示,模型在土壤厚度大于等于10 cm、卫星仰角高于50°的情况下较为精确,此时利用北斗B1信号与GPS L1信号反演土壤湿度的均方根误差分别小于0.04 cm³/cm³与0.09 cm³/cm³。     

Digitizing the thermal and hydrological parameters of land surface in subtropical China using AMSR-E brightness temperatures

ABSTRACT

Digitizing the land surface temperature (T_s) and surface soil moisture (m_v) is essential for developing the intelligent Digital Earth. Here, we developed a two parameter physical-based passive microwave remote sensing model for jointly retrieving T_s and m_v using the dual-polarized T_b of Aqua satellite advanced microwave scanning radiometer (AMSR-E) C-band (6.9 GHz) based on the simplified radiative transfer equation. Validation using in situ T_s and m_v in southern China showed the average root mean square errors (RMSE) of T_s and m_v retrievals reach 2.42 K (R² = 0.61, n = 351) and 0.025 g cm^?3 (R² = 0.68, n = 663), respectively. The results were also validated using global in situ T_s (n = 2362) and m_v (n = 1657) of International Soil Moisture Network. The corresponding RMSE are 3.44 k (R² = 0.86) and 0.039 g cm^?3 (R² = 0.83), respectively. The monthly variations of model-derived Ts and mv are highly consistent with those of the Moderate Resolution Imaging Spectroradiometer T_s (R² = 0.57; RMSE = 2.91 k) and ECV_SM m_v (R² = 0.51; RMSE = 0.045 g cm^?3), respectively. Overall, this paper indicates an effective way to jointly modeling T_s and m_v using passive microwave remote sensing.     

Evaluation of machine learning models for rice dry biomass estimation and mapping using quad-source optical imagery

ABSTRACT

Several machine learning regression models have been advanced for the estimation of crop biophysical parameters with optical satellite imagery. However, literature on the comparative performances of such models is still limited in range and scope, especially under multiple data sources, despite the potential of multi-source imagery to improving crop monitoring in cloudy areas. To fill in this knowledge gap, this study explored the synergistic use of Landsat-8, Sentinel-2A, China’s environment and disaster monitoring and forecasting satellites (HJ-1 A and B) and Gaofen-1 (GF-1) data to evaluate four machine learning regression models that include Random Forest (RF), Support Vector Machine (SVM), k-Nearest Neighbor (k-NN), and Gradient Boosting Decision Tree (GBDT), for rice dry biomass estimation and mapping. Taking a major rice cultivation area in southeast China as case study during the 2016 and 2017 growing seasons, a cross-calibrated time series of the Enhanced Vegetation Index (EVI) was obtained from the quad-source optical imagery and on which the aforementioned models were applied, respectively. Results indicate that in the before rice heading scenario, the most accurate dry biomass estimates were obtained by the GBDT model (R² of 0.82 and RMSE of 191.8 g/m²) followed by the RF model (R² of 0.79 and RMSE of 197.8 g/m²). After heading, the k-NN model performed best (R² of 0.43 and RMSE of 452.1 g/m²) followed by the RF model (R² of 0.42 and RMSE of 464.7 g/m²). Whist the k-NN model performed least in the before heading scenario, SVM performed least in the after heading scenario. These findings may suggest that machine learning regression models based on an ensemble of decision trees (RF and GBDT) are more suitable for the estimation of rice dry biomass, at least with optical satellite imagery. Studies that would extend the evaluation of these machine learning models, to other parameters like leaf area index, and to microwave imagery, are hereby recommended.     

小波变换与滑动窗口相结合的GNSS-IR雪深估测模型

GNSS干涉反射技术（GNSS interferometric reflectometry）是一种新型的地表雪深监测方式。针对当前信号分离不佳和随机估测偏差的问题,提出联合小波变换和滑动窗口构建一种多卫星融合的GNSS-IR雪深估测精化模型。该模型采用离散小波变换代替常用的多项式方法,获取高质量的信噪比序列。通过利用阈值约束下的滑动窗口筛选多卫星有效反射高度,并进行等权平均。以PBO H₂O和SNOTEL的雪深数据为参考值,利用2016—2017年雪季的GNSS观测数据建立模型并验证精度。结果表明：①GNSS-IR精化模型估测结果与实测数据在整体趋势上保持高一致性;②与单颗卫星结果相比,多卫星融合估测结果在精度和稳定性方面明显改善,其均方根误差（RMSE）为10 cm,相较于PBO H₂O减少了近50%。此外,考虑到地表粗糙度作为一种误差影响因素,采用新的反射高度基准修正的雪深估测相对RMSE误差约4 cm,同时估测值与实际值的相关系数达到0.98。     

Impact of data model and point density on aboveground forest biomass estimation from airborne LiDAR

Background

Accurate estimation of aboveground forest biomass (AGB) and its dynamics is of paramount importance in understanding the role of forest in the carbon cycle and the effective implementation of climate change mitigation policies. LiDAR is currently the most accurate technology for AGB estimation. LiDAR metrics can be derived from the 3D point cloud (echo-based) or from the canopy height model (CHM). Different sensors and survey configurations can affect the metrics derived from the LiDAR data. We evaluate the ability of the metrics derived from the echo-based and CHM data models to estimate AGB in three different biomes, as well as the impact of point density on the metrics derived from them.

Results

Our results show that differences among metrics derived at different point densities were significantly different from zero, with a larger impact on CHM-based than echo-based metrics, particularly when the point density was reduced to 1 point m^?2. Both data models-echo-based and CHM-performed similarly well in estimating AGB at the three study sites. For the temperate forest in the Sierra Nevada Mountains, California, USA, R² ranged from 0.79 to 0.8 and RMSE (relRMSE) from 69.69 (35.59%) to 70.71 (36.12%) Mg ha^?1 for the echo-based model and from 0.76 to 0.78 and 73.84 (37.72%) to 128.20 (65.49%) Mg ha^?1 for the CHM-based model. For the moist tropical forest on Barro Colorado Island, Panama, the models gave R² ranging between 0.70 and 0.71 and RMSE between 30.08 (12.36%) and 30.32 (12.46) Mg ha^?1 [between 0.69–0.70 and 30.42 (12.50%) and 61.30 (25.19%) Mg ha^?1] for the echo-based [CHM-based] models. Finally, for the Atlantic forest in the Sierra do Mar, Brazil, R² was between 0.58–0.69 and RMSE between 37.73 (8.67%) and 39.77 (9.14%) Mg ha^?1 for the echo-based model, whereas for the CHM R² was between 0.37–0.45 and RMSE between 45.43 (10.44%) and 67.23 (15.45%) Mg ha^?1.

Conclusions

Metrics derived from the CHM show a higher dependence on point density than metrics derived from the echo-based data model. Despite the median of the differences between metrics derived at different point densities differing significantly from zero, the mean change was close to zero and smaller than the standard deviation except for very low point densities (1 point m^?2). The application of calibrated models to estimate AGB on metrics derived from thinned datasets resulted in less than 5% error when metrics were derived from the echo-based model. For CHM-based metrics, the same level of error was obtained for point densities higher than 5 points m^?2. The fact that reducing point density does not introduce significant errors in AGB estimates is important for biomass monitoring and for an effective implementation of climate change mitigation policies such as REDD + due to its implications for the costs of data acquisition. Both data models showed similar capability to estimate AGB when point density was greater than or equal to 5 point m^?2.

     

Satellite surface soil moisture from SMOS and Aquarius: Assessment for applications in agricultural landscapes

Satellite surface soil moisture has become more widely available in the past five years, with several missions designed specifically for soil moisture measurement now available, including the Soil Moisture and Ocean Salinity (SMOS) mission and the Soil Moisture Active/Passive (SMAP) mission. With a wealth of data now available, the challenge is to understand the skill and limitations of the data so they can be used routinely to support monitoring applications and to better understand environmental change. This paper examined two satellite surface soil moisture data sets from the SMOS and Aquarius missions against in situ networks in largely agricultural regions of Canada. The data from both sensors was compared to ground measurements on both an absolute and relative basis. Overall, the root mean squared errors for SMOS were less than 0.10 m³ m⁻³ at most sites, and less where the in situ soil moisture was measured at multiple sites within the radiometer footprint (sites in Saskatchewan, Manitoba and Ontario). At many sites, SMOS overestimates soil moisture shortly after rainfall events compared to the in situ data; however this was not consistent for each site and each time period. SMOS was found to underestimate drying events compared to the in situ data, however this observation was not consistent from site to site. The Aquarius soil moisture data showed higher root mean squared errors in areas where there were more frequent wetting and drying cycles. Overall, both data sets, and SMOS in particular, showed a stable and consistent pattern of capturing surface soil moisture over time.     

Satellite and In Situ Observations of a Phytoplankton Bloom from Coastal Bay of Bengal: Role in pCO<Subscript>2</Subscript> Modulation

A phytoplankton bloom was monitored in coastal waters of Bay of Bengal and its influence in water column properties was investigated. Significant draw down of CO₂ was noted within the vicinity of the bloom associated with high chlorophyll biomass. Microscopic analysis revealed diatoms as the dominant population. Skeletonema costatum a diatom, reached cell density of 36,898 cells l^?1 within the bloom. The lowest surface pCO₂ observed was 287 µatm at the southern end of the transect covarying with surface chlorophyll of 1.090 µg l^?1. At the northern end the surface pCO₂ went as low as 313 µatm. The pCO₂ levels below the mixed layer increased twice of that of surface value (~600 µatm). The chlorophyll values observed by Ocean Colour Monitor-2 were modestly related with the in situ measurements. The primary productivity derived from growth rate, assimilation number and maximum surface chlorophyll was 160.6 mg C m^?2 day^?1 leading to a modest sequestration ~of 0.08 Gg of carbon per day by the surface waters. Our observations reflects the potential role of diatom blooms on coastal carbon dynamics therefore should be carefully monitored in realm of anthropogenic changes.     

Multi-Index Soil Moisture Estimation from Satellite Earth Observations: Comparative Evaluation of the Topographic Wetness Index (TWI), the Temperature Vegetation Dryness Index (TVDI) and the Improved TVDI (iTVDI)

Soil moisture estimation from satellite earth observation has emerged effectively advantageous due to the high temporal resolution, spatial resolution, coverage, and processing convenience it affords. In this paper, we present a study carried out to estimate soil moisture level at every location within Enugu State Nigeria from satellite earth observation. Comparative analysis of multiple indices for soil moisture estimation was carried out with a view to evaluating the robustness, correlation, appropriateness and accuracy of the indices in estimating the spatial distribution of soil moisture level in Enugu State. Results were correlated and validated with In-Situ soil moisture observations from multi-sample points. To achieve this, the Topographic Wetness Index (TWI), based on digital elevation data, the Temperature Vegetation Dryness Index (TVDI) and an improved TVDI (iTVDI) incorporating air temperature and a Digital Elevation Model (DEM) were calculated from ASTER global DEM and Landsat images. Possible dependencies of the indices on land cover type, topography, and precipitation were explored. In-Situ soil moisture data were used to validate the derived indices. The results showed that there was a positive significant relationship between iTVDI versus TVDI (R = 0.53, P value < 0.05), while in iTVDI versus TWI (R = 0.00, P value > 0.05) and TVDI versus TWI (R = ?0.01, P value > 0.05) no significant relationship existed. There was a strong relationship between iTVDI and topography, land cover type, and precipitation than other indices (TVDI, TWI). In situ measured soil moisture values showed negative significant relationship with TVDI (R = ?0.52, P value < 0.05) and iTVDI (R = ?0.63, P value < 0.05) but not with TWI (R = ?0.10, P value > 0.05). The iTVDI outperformed the other two index; having a stronger relationship with topography, precipitation, land cover classes and soil moisture. It concludes that although iTVDI outperformed other indices (TVDI, TWI) in soil moisture estimation, the decision of which index to apply is dependent on available data, the intent of usage and spatial scale.     

Comparative analysis of different uni- and multi-variate methods for estimation of vegetation water content using hyper-spectral measurements

Assessment of vegetation water content is critical for monitoring vegetation condition, detecting plant water stress, assessing the risk of forest fires and evaluating water status for irrigation. The main objective of this study was to investigate the performance of various mono- and multi-variate statistical methods for estimating vegetation water content (VWC) from hyper-spectral data. Hyper-spectral data is influenced by multi-collinearity because of a large number of (independent) spectral bands being modeled by a small number of (dependent) biophysical variables. Therefore, some full spectrum methods that are known to be suitable for analyzing multi-collinear data set were chosen. Canopy spectral reflectance was obtained with a GER 3700 spectro-radiometer (400–2400 nm) in a laboratory setting and VWC was measured by calculating wet/dry weight difference per unit of ground area (g/m²) of each plant canopy (n = 95). Three multivariate statistical methods were applied to estimate VWC: (1) partial least square regression, (2) artificial neural network and (3) principal component regression. They were selected to minimize the problem related to multi-collinearity. For comparison, uni-variate techniques including narrow band ratio water index (RWI), normalized difference water index (NDWI), second soil adjusted vegetation index (SAVI2) and transferred soil adjusted vegetation index (TSAVI) were applied. For each type of vegetation index, all two-band combinations were evaluated to determine the best band combination. Validation of the methods was based on the cross validation procedure and using three statistical indicators: R², RMSE and relative RMSE. The cross-validated results identified PLSR as the regression model providing the most accurate estimates of VWC among the various methods. The result revealed that this model is highly recommended for use with multi-collinear datasets ($R_{\text{CV}}^2=0.94$, RRMSE_CV = 0.23). Principal component regression exhibited the lowest accuracy among the multivariate models ($R_{\text{CV}}^2=0.78$, RRMSE_CV = 0.41).     

Global SMOS Soil Moisture Retrievals from The Land Parameter Retrieval Model

A recent study by Van der Schalie et al. (2015) showed good results for applying the Land Parameter Retrieval Model (LPRM) on SMOS observations over southeast Australia and optimizing and evaluating the retrieved soil moisture (θ in m³ m⁻³) against ground measurements from the OzNet sites. In this study, the LPRM parameterization is globally updated for SMOS against modelled θ from MERRA-Land (MERRA) and ERA-Interim/Land (ERA) over the period of July 2010–December 2010, mainly focusing on two parameters: the single scattering albedo (ω) and the roughness (h). The Pearson's coefficient of correlation (r) increased rapidly when increasing the ω up to 0.12 and reached a steady state from thereon, no significant spatial pattern was found in the estimation of the single scattering albedo, which could be an artifact of the used parameter estimation procedure, and a single value of 0.12 was therefore used globally. The h was defined as a function of θ and varied slightly for the different angle bins, with maximum values of 1.1–1.3 as the angle changes from 42.5° to 57.5°.This resulted in an average r of 0.51 and 0.47, with a bias (m³ m⁻³) of −0.02 and −0.01 and an unbiased root mean square error (ubrmse in m³ m⁻³) of 0.054 and 0.056 against MERRA (ascending and descending). For ERA this resulted in an r of 0.61 and 0.53, with a bias of −0.03 and an ubrmse 0.055 and 0.059. The resulting parameterization was then used to run LPRM on SMOS observations over the period of July 2010–December 2013 and evaluated against SMOS Level 3 (L3) θ and available in situ measurements from the International Soil Moisture Network (ISMN). The comparison with L3 shows that the LPRM θ retrievals are very similar, with for the ascending set very high r of over 0.9 in large parts of the globe, with an overall average of 0.85 and the descending set performing less with an average of 0.74, mainly due to the negative r over the Sahara. The mean bias is 0.03, with an ubrmse of 0.038 and 0.044. In this study there are three major areas where the LPRM retrievals do not perform well: very dry sandy areas, densely forested areas and over high latitudes, which are all known limitations of LPRM. The comparison against in situ measurement from the ISMN give very similar results, with average r for LPRM of 0.65 and 0.61 (0.64 and 0.59 for L3) for the ascending and descending sets, while having a comparable bias and ubrmse over the different networks. This shows that LPRM used on SMOS observations produce θ retrievals with a similar quality as the SMOS L3 product.     

Estimation of winter wheat crop growth parameters using time series Sentinel-1A SAR data

In the present study, Sentinel-1A Synthetic Aperture Radar analysis of time series data at C-band was carried out to estimate the winter wheat crop growth parameters. Five different date images were acquired during January 2015–April 2015 at different growth stages from tillering to ripening in Varanasi district, India. The winter wheat crop parameters, i.e. leaf area index, vegetation water content (VWC), fresh biomass (FB), dry biomass (DB) and plant height (PH) were estimated using random forest regression (RFR), support vector regression (SVR), artificial neural network regression (ANNR) and linear regression (LR) algorithms. The Ground Range Detected products of Interferometric Wide (IW) Swath were used at VV polarization. The three different subplots of 1 m² area were taken for the measurement of crop parameters at every growth stage. In total, 73 samples were taken as the training data-sets and 39 samples were taken as testing data-sets. The highest sensitivity (adj. R^2?=?0.95579) of backscattering with VWC was found using RFR algorithm, whereas the lowest sensitivity (adj. R^2?=?0.66201) was found for the PH using LR algorithm. Overall results indicate more accurate estimation of winter wheat parameters by the RFR algorithm followed by SVR, ANNR and LR algorithms.     

Estimation of higher chlorophylla concentrations using field spectral measurement and HJ-1A hyperspectral satellite data in Dianshan Lake,China

Based on in situ water sampling and field spectral measurements in Dianshan Lake, a semi-analytical three-band algorithm was used to estimate Chlorophylla (Chla) content in case II waters. The three bands selected to estimate Chla for high concentrations included 653, 691 and 748 nm. An equation, based on the difference in reciprocal reflectance between 653 and 691 nm, multiplied by reflectance at 748 nm as [R_rs⁻¹(653) − R_rs⁻¹ (691)] R_rs(748), explained 85.57% of variance in Chla concentration with a root mean square error (RMSE) of <6.56 mg/m³. In order to test the utility of this model with satellite data, HJ-1A Hyperspectral Imager (HSI) data were analyzed using comparable wavelengths selected from the in situ data [B₆₇⁻¹(656) − B₈₀⁻¹(716)] B₈₇(753). This model accounted for 84.3% of Chla variation, estimating Chla concentrations with an RMSE of <4.23 mg/m³. The results illustrate that, based on the determined wavelengths, the spectrum-based model can achieve a high estimation accuracy and can be applied to hyperspectral satellite imagery especially for higher Chla concentration waters.