The channel between Gran Canaria and Tenerife: constructive processes and destructive events during the evolution of volcanic islands

Seismic, sidescan sonar, bathymetric multibeam and ODP (Ocean Drilling Program) data obtained in the submarine channel between the volcanic islands of Gran Canaria and Tenerife allow to identify constructive features and destructive events during the evolution of both islands. The most prominent constructive features are the submarine island flanks being the acoustic basement of the seismic images. The build-up of Tenerife started following the submarine stage of Gran Canaria because the submarine island flank of Tenerife onlaps the steeper flank of Gran Canaria. The overlying sediments in the channel between Gran Canaria and Tenerife are chaotic, consisting of slumps, debris flow deposits, syn-ignimbrite turbidites, ash layers, and other volcaniclastic rocks generated by eruptions, erosion, and flank collapse of the volcanoes. Volcanic cones on the submarine island flanks reflect ongoing submarine volcanic activity. The construction of the islands is interrupted by large destructive events, especially by flank collapses resulting in giant landslides. Several Miocene flank collapses (e.g., the formation of the Horgazales basin) were identified by combining seismic and drilling data whereas young giant landslides (e.g., the Güimar debris avalanche) are documented by sidescan, bathymetric and drilling data. Sediments are also transported through numerous submarine canyons from the islands into the volcaniclastic apron. Seismic profiles across the channel do not show a major offset of reflectors. The existence of a repeatedly postulated major NE-SW-trending fault zone between Gran Canaria and Tenerife is thus in doubt. The sporadic earthquake activity in this area may be related to the regional stress field or the submarine volcanic activity in this area. Seismic reflectors cannot be correlated through the channel between the sedimentary basins north and south of Gran Canaria because the channel acts as sediment barrier. The sedimentary basins to the north and south evolved differently following the submarine growth of Gran Canaria and Tenerife in the Miocene.     

Slope failures on the flanks of the western Canary Islands

Landslides have been a key process in the evolution of the western Canary Islands. The younger and more volcanically active Canary Islands, El Hierro, La Palma and Tenerife, show the clearest evidence of recent landslide activity. The evidence includes landslide scars on the island flanks, debris deposits on the lower island slopes, and volcaniclastic turbidites on the floor of the adjacent ocean basins. At least 14 large landslides have occurred on the flanks of the El Hierro, La Palma and Tenerife, the majority of these in the last 1 million years, with the youngest, on the northwest flank of El Hierro, as recent as 15 thousand years in age. Older landslides undoubtedly occurred, but are difficult to quantify because the evidence is buried beneath younger volcanic rocks and sediments. Landslides on the Canary Island flanks can be categorised as debris avalanches, slumps or debris flows. Debris avalanches are long runout catastrophic failures which typically affect only the superficial part of the island volcanic sequence, up to a maximum thickness of 1 to 2 km. They are the commonest type of landslide mapped. In contrast, slumps move short distances and are deep-rooted landslides which may affect the entire thickness of the volcanic edifice. Debris flows are defined as landslides which primarily affect the sedimentary cover of the submarine island flanks. Some landslides are complex events involving more than one of the above end-member processes.Individual debris avalanches have volumes in the range of 50–500 km³, cover several thousand km² of seafloor, and have runout distances of up to 130 km from source. Overall, debris avalanche deposits account for about 10% of the total volcanic edifices of the small, relatively young islands of El Hierro and La Palma. Some parameters, such as deposit volumes and landslide ages, are difficult to quantify. The key characteristics of debris avalanches include a relatively narrow headwall and chute above 3000 m water depth on the island flanks, broadening into a depositional lobe below 3000 m. Debris avalanche deposits have a typically blocky morphology, with individual blocks up to a kilometre or more in diameter. However, considerable variation exists between different avalanche deposits. At one extreme, the El Golfo debris avalanche on El Hierro has few large blocks scattered randomly across the avalanche surface. At the other, Icod on the north flank of Tenerife has much more numerous but smaller blocks over most of its surface, with a few very large blocks confined to the margins of the deposit. Icod also exhibits flow structures (longitudinal shears and pressure ridges) that are absent in El Golfo. The primary controls on the block structure and distribution are inferred to be related to the nature of the landslide material and to flow processes. Observations in experimental debris flows show that the differences between the El Golfo and Icod landslide deposits are probably controlled by the greater proportion of fine grained material in the Icod landslide. This, in turn, relates to the nature of the failed volcanic rocks, which are almost entirely basalt on El Hierro but include a much greater proportion of pyroclastic deposits on Tenerife.Landslide occurrence appears to be primarily controlled by the locations of volcanic rift zones on the islands, with landslides propagating perpendicular to the rift orientation. However, this does not explain the uneven distribution of landslides on some islands which seems to indicate that unstable flanks are a ‘weakness’ that can be carried forward during island development. This may occur because certain island flanks are steeper, extend to greater water depths or are less buttressed by the surrounding topography, and because volcanic production following a landslide my be concentrated in the landslide scar, thus focussing subsequent landslide potential in this area. Landslides are primarily a result of volcanic construction to a point where the mass of volcanic products fails under its own weight. Although the actual triggering factors are poorly understood, they may include or be influenced by dyke intrusion, pore pressure changes related to intrusion, seismicity or sealevel/climate changes. A possible relationship between caldera collapse and landsliding on Tenerife is not, in our interpretation, supported by the available evidence.     

L'ı̂le de la Dominique, à l'origine des avalanches de débris les plus volumineuses de l'arc des Petites AntillesThe Island of Dominica,site for the generation of the most voluminous debris avalanches in the Lesser Antilles Arc

Results from recent fieldwork and the Aguadomar marine survey in the Lesser Antilles clearly indicate that the volcanic field of southern Dominica has experienced three major edifice collapse events. This led to formation of the most voluminous debris avalanches known in the Caribbean Arc. Submarine hummocky morphology with plurikilometric megablocks is characteristic of debris avalanche deposits. We propose that steep slopes on the western Caribbean side of the island and intense hydrothermal alteration lead to recurrent large-scale edifice collapses. Therefore islands in the Lesser Antilles face a non-negligible risk from generation of tsunamis associated with potential future edifice collapse. To cite this article: A. Le Friant et al., C. R. Geoscience 334 (2002) 235–243.     

Evidence for carbonate platform failure during rapid sea‐level rise; ca 14 000 year old bioclastic flow deposits in the Lesser Antilles

Bioclastic flow deposits offshore from the Soufrière Hills volcano on Montserrat in the Lesser Antilles were deposited by the largest volume sediment flows near this active volcano in the last 26 kyr. The volume of these deposits exceeds that of the largest historic volcanic dome collapse in the world, which occurred on Montserrat in 2003. These flows were most probably generated by a large submarine slope failure of the carbonate shelf comprising the south‐west flank of Antigua or the east flank of Redonda; adjacent islands that are not volcanically active. The bioclastic flow deposits are relatively coarse‐grained and either ungraded or poorly graded, and were deposited by non‐cohesive debris flow and high density turbidity currents. The bioclastic deposit often comprises multiple sub‐units that cannot be correlated between core sites; some located just 2 km apart. Multiple sub‐units in the bioclastic deposit result from either flow reflection, stacking of multiple debris flow lobes, and/or multi‐stage collapse of the initial landslide. This study provides unusually precise constraints on the age of this mass flow event that occurred at ca 14 ka. Few large submarine landslides have been well dated, but the slope failures that have been dated are commonly associated with periods of rapid sea‐level change.     

From seamount to oceanic island, Porto Santo, central East-Atlantic

The uplifted and deeply eroded volcanic succession of Porto Santo (central East-Atlantic) is the product of a wide spectrum of dynamic processes that are active in shoaling to emergent seamounts. Two superimposed lapilli cones marking the base of the exposed section are interpreted as having formed from numerous submarine to subaerial phreatomagmatic explosions, pyroclastic fragmentation being subordinate. The lower basaltic and the upper mugearitic to trachytic sections are dominated by redeposited tephra and are called 'lapilli cone aprons'. Vertical growth due to accumulation of tephra, voluminous intrusions, and minor pillowed lava flows produced ephemeral islands which were subsequently leveled by wave erosion, as shown by conglomerate beds. Periods of volcanic quiescence are represented by abundant biocalcarenite lenses at several stratigraphic levels. The loose tephra piles became stabilized by widespread syn-volcanic intrusions such as dikes and trachytic to rhyolitic domes welding the volcanic and volcaniclastic ensemble into a solid edifice. Shattering of a submarine extrusive trachytic dome by pyroclastic and phreatomagmatic explosions, accentuated by quench fragmentation, resulted in pumice- and crystal-rich deposits emplaced in a prominent submarine erosional channel. The dome must have produced an island as indicated by a collapse breccia comprising surf-rounded boulders of dome material. Subaerial explosive activity is represented by scoria cones and tuff cones. Basaltic lava flows built a resistant cap that protected the island from wave erosion. Some lava flows entered the sea and formed two distinct types of lava delta: 1. closely-packed pillow lava and massive tabular lava flows along the southwestern coast of Porto Santo, and 2. a steeply inclined pillow-hyaloclastite breccia prism composed of foreset-bedded hydroclastic breccia, variably-shaped pillows, and thin sheet flows capped by subhorizontal submarine to subaerial lava flows along the eastern coast of Porto Santo.The facies architectures indicate emplacement: 1. on a gently sloping platform in southwestern Porto Santo, and 2. on steep offshore slopes along high energy shorelines in eastern Porto Santo.Growth of the pillow-hyaloclastite breccia prism is dominated by the formation of foreset beds but various types of syn-volcanic intrusions contributed significantly. Submarine flank eruptions occurred in very shallow water on the flanks of the hyaloclastite prism in eastern Porto Santo. The island became consolidated by intrusion of numerous dikes and by emplacement of prominent intrusions that penetrate the entire volcanic succession. Volcanic sedimentation ended with the emplacement of a debris avalanche that postdates the last subaerial volcanic activity.     

Landscape and sedimentary response to catastrophic debris avalanches, western Taranaki, New Zealand

Catastrophic volcanic debris avalanches reshape volcanic edifices with up to half of pre-collapse cone volumes being removed. Deposition from this debris avalanche deposit often fills and inundates the surrounding landscape and may permanently change the distribution of drainage networks. On the weakly-incised Mt. Taranaki ring-plain, volcanic debris avalanche deposits typically form a large, wedge shape (in plan view), over all flat-lying fans. Following volcanic debris avalanches a period of intense re-sedimentation commonly begins on ring-plain areas, particularly in wet or temperate climates. This is exacerbated by large areas of denuded landscape, ongoing instability in the scarp/source region, damming of river/stream systems, and in some cases inherent instability of the volcanic debris avalanche deposits. In addition, on Mt. Taranaki, the collapse of a segment of the cone by volcanic debris avalanche often generates long periods of renewed volcanism, generating large volumes of juvenile tephra onto unstable and unvegetated slopes, or construction of new domes with associated rock falls and block-and-ash flows. The distal ring-plain impact from these post-debris avalanche conditions and processes is primarily accumulation of long run-out debris flow and hyperconcentrated flow deposits with a variety of lithologies and sedimentary character. Common to these post-debris avalanche units is evidence for high-water-content flows that are typically non-cohesive. Hence sedimentary variations in these units are high in lateral and longitudinal exposure in relation to local topography. The post-collapse deposits flank large-scale fans and hence similar lithological and chronological sequences can form on widely disparate sectors of the ring plain. These deposits on Mt. Taranaki provide a record of landscape response and ring-plain evolution in three stages that divide the currently identified Warea Formation: 1) the deposition of broad fans of material adjacent to the debris avalanche unit; 2) channel formation and erosion of Stage 1 deposits, primarily at the contact between debris avalanche deposits and the Stage 1 deposits and the refilling of these channels; and 3) the development of broad tabular sheet flows on top of the debris avalanche, leaving sediments between debris avalanche mounds. After a volcanic debris avalanche, these processes represent an ever changing and evolving hazard-scape with hazard maps needing to be regularly updated to take account of which stage the sedimentary system is in.     

Mid-Holocene lateral collapse of Antuco volcano (Chile): debris avalanche deposit features,emplacement dynamics,and impacts

Antuco (37.4°S, 71.4°W; Chile) is a dominantly basaltic stratovolcano whose original?~?3300 m altitude main cone experienced a catastrophic sector collapse at?~?7.1 cal ka BP, producing a volcanic debris avalanche deposit (VDAD) with hummocky surface and?~?6.4 km³ of volume. We carried out geological studies of its debris avalanche deposit, which was distributed to the W and displays a longitudinal facies transformation from edifice’s megablocks and block to mixed facies in distal areas (up to 25 km from the scar). Our observations support the behavior of the avalanche beginning as a translational slide, and then as plug flow when confined within the Laja River valley. Clay abundance and high content of hydrothermally altered material may suggest active participation of water; flow velocities are estimated to?~100 m s^?1. We primarily identify the steep-sided flanks of the cone, and hydrothermal alteration promoted the edifice instability, while basement seismogenic structures may have ultimately triggered the landslide. Subsequent landslide-led events include the transformation of the volcanic activity with explosive eruptions producing a sequence of dilute pyroclastic density currents (PDCs) ending?~3.4 ky BP, and extensive lava effusion rapidly reconstructing the collapsed edifice. Moreover, the Antuco VDAD also blocked the natural output of the Laja Lake, increasing its level by?~200 m and then triggering cataclysmic outburst floods by dam rupture, preserved as high-energy alluvial beds with ages between 2.8 and 1.7 ky BP. The Antuco constitutes an excellent example of a critical chain of events initiated by a stratovolcano lateral collapse and warns for detailed hazard investigations to better comprehend its related impacts.

     

Large landslides triggered by caldera collapse events in Tenerife,Canary Islands

Landsliding is a significant process on volcanic edifices, with individual events exceeding several cubic kilometres in volume. The causes of such mass movements and their relationship with volcanic activity are still poorly understood. Landslide events are an important factor in the evolution of volcanic islands such as Tenerife, where vertical and lateral collapses have occurred repeatedly. Subaerial and submarine processes related to landslide events strongly influence the morphology of the island. On Tenerife there are three very big valleys, Güimar, La Orotava and Icod, that have been created by large landslide events with ages ranging from Upper Pliocene to Middle Pleistocene. The landslides affect the northern flanks of the island and the slopes of a large central volcanic edifice, the Las Canadas volcano, which is truncated by the Las Canadas caldera, a multicyclic collapse depression, formed between 1.02 and 0.17 Ma. We have focused our studies on the potential for caldera collapse events to trigger large scale landslides. The available geological and morphological information has been incorporated into numerical models, which simulate the destabilising effects of a caldera collapse episode. The results of the numerical modelling indicate that processes associated with caldera collapse events can overcome the stabilising forces on the volcano flank and trigger landslides. We propose that caldera collapse events may have triggered large landslides on the slopes of the Las Canadas volcano.     

Large volcanic landslide and debris avalanche deposit at Meru,Tanzania

Meru volcano is located within the Northern Tanzanian Divergence Zone where the east branch of the East African Rift splits into several branches. The 4565-m-high Meru volcano is breached on the east flank by a horseshoe-shaped scar following a major collapse associated with the Momella debris avalanche approximately 9000 years ago. Remote sensing combined with detailed field mapping allowed the characterisation of the Momella debris avalanche deposit, structure, and texture. Hummocks, ridges, lineaments, lobes, grabens and shear zones are observed on the surface of the deposit. The most common facies observed are the mixed facies with indurated and shattered outcrops and the matrix facies. The collapse involved a volume of 20 ± 2 km³ with a deposit that spread over an area of 1250 km², up to the base of Kilimanjaro. Based on field evidence, we suggest that water played a key role in the deformation, facies formation, avalanche emplacement and mobility of the entire deposit but to a lesser extent south of Ngurodoto complex. The deformation and emplacement of the avalanche were accommodated by both extension and shearing on a water-fluidised basal layer.     

Deep-sea volcaniclastic sedimentary systems: an example from La Fournaise volcano, Réunion Island, Indian Ocean

A volcaniclastic sedimentary fan extending to water depths of 4000 m is characterized using gravity cores, camera surveys, high-resolution sonar images, seismic records and bathymetry from the submarine portion of La Fournaise volcano, Réunion Island, a basaltic shield volcano in the SW Indian Ocean. Three main areas are identified from the study: (1) the proximal fan extending from 500 m water depth down to 2000 m water depth; (2) the outer fan extending from 2000 m water depth down to 3600 m water depth; (3) the basin extending beyond 3600 m water depth. Within these three main areas, seven distinct submarine environments are defined: the proximal fan is characterized by volcanic basement outcrops, sedimentary slides, deep-water deltas, debris-avalanche deposits, and eroded floor in the valley outlets; the outer fan is characterized by a discontinuous fine-grained sedimentary cover overlying coarse-grained turbidites or undifferentiated volcanic basement; the basin is characterized by hemipelagic muds and fine-grained turbidites interbedded with sandy and gravelly turbidite lobes. The evolution of the deep-sea volcaniclastic fan is strongly influenced by sector collapses, such as the one which occurred 0·0042 Ma ago. This collapse produced a minimum of 6 km³ of debris-avalanche deposit in the proximal area. The feeding regime of the deep-sea fan is ‘alluvial dominated’ before the occurrence of any sector collapse and ‘lava-dominated’ after the occurrence of a sector collapse. The main deep-water lava-fed delta is prograding among the blocks of the debris-avalanche deposits as a result of turbidity flows occurring on the delta slope. These turbidity flows are triggered routinely by wave-action, earthquakes and accumulation of new volcanic debris on top of the deltas. Both turbidity currents triggered on the deep-water delta slope, and those triggered by debris avalanche reworked volcaniclastic material as far as 100 km from the shore line.     

Stratigraphy and volcanology of the Türkbükü volcanics: products of a stratovolcano in the Bodrum Peninsula,SW Anatolia

The Middle‐Upper Miocene Bodrum magmatic complex of the Aegean region, southwestern Turkey, is mainly represented by intermediate stocks, lavas, pyroclastic and volcaniclastic deposits. Monzonitic stocks and connected porphyry intrusions and extrusions are the first products of the magmatism. These are followed by a volcanic succession consisting of andesitic‐latitic lavas, autobrecciated lavas, pyroclastic and volcaniclastic deposits. The final stage is represented by basaltic and basaltic andesitic flows and dykes intruded into previous units. The volcanic succession crops out in the northern part of the Bodrum peninsula. In the lower part of this succession are widespread pyroclastic deposits, composed of pyroclastic fall and flow units, alternating with epiclastic deposits. Grain size, volume and thickness of the pyroclastic deposits were mainly controlled by the type, magnitude and intensity of the eruption. Further up the section, there are two horizons of debris avalanche deposits forming the coarsest and thickest deposits of the volcaniclastic succession. The debris avalanche deposits indicate at least two different flank collapses coeval with the volcanism. The stratigraphy and map pattern of these volcanic units imply that the northern part of the Bodrum peninsula was the north‐facing flank of a stratovolcano during the mid‐Late Miocene. Copyright © 2006 John Wiley & Sons, Ltd.     

Analyses on granular mass movement mechanics and deformation with distinct element numerical modeling: implications for large-scale rock and debris avalanches

A large-scale avalanche of Earth material is modeled here as a granular flow using a distinct element numerical model PFC ^2D. Such failures occur in a variety of geological settings and are known to occur frequently over geologic time-scales transporting significant volumes of material basinward. Despite this, they remain poorly understood. The model used here begins with a listric failure, typical of the flank collapse of a volcanic cone, and describes the movement of an assembly of several thousand particles from failure to deposition. Within the model, each particle possesses its own material properties and interacts with its immediate neighbors and/or the basal boundary during emplacement. The general mechanics of the particle assembly are observed by monitoring the stresses, displacements, and velocities of distinct sections of the avalanche body. We monitor the avalanches’ energy regime (e.g., gravitational influence, energy dissipation by friction, kinetic energy evolution, and avalanche body strain). The addition of colored markers of varying geometry to the pre-failure avalanche was also used to make qualitative observations on the internal deformation that occurs during avalanche emplacement. A general stretching and thinning of the avalanche is observed. Monitoring of vertical and horizontal variations in stress, strain, porosity, and relative particle stability indicate that the lower more proximal sections of the avalanche are subject to higher stresses. These stresses are observed to be most significant during the initial phases of failure but decline thereafter; a situation likely to be conducive to block fragmentation and in developing a basal shear layer in real-world events. The model also shows how an avalanche which is initially influenced purely by gravity (potential energy) develops into a fully flowing assemblage as downslope momentum is gained and kinetic energy increases. The horizontal transition where the failure meets the run-out surface is recognized as a key area in emplacement evolution. The model has particular relevance to volcanic flank collapses and consequently the implications of the model to these types of failure and the geological products that result are considered in detail although the model is relevant to any form of large-scale rock or debris avalanche.     

Pacific Basin tsunami hazards associated with mass flows in the Aleutian arc of Alaska

We analyze mass-flow tsunami generation for selected areas within the Aleutian arc of Alaska using results from numerical simulation of hypothetical but plausible mass-flow sources such as submarine landslides and volcanic debris avalanches. The Aleutian arc consists of a chain of volcanic mountains, volcanic islands, and submarine canyons, surrounded by a low-relief continental shelf above about 1000–2000 m water depth. Parts of the arc are fragmented into a series of fault-bounded blocks, tens to hundreds of kilometers in length, and separated from one another by distinctive fault-controlled canyons that are roughly normal to the arc axis. The canyons are natural regions for the accumulation and conveyance of sediment derived from glacial and volcanic processes. The volcanic islands in the region include a number of historically active volcanoes and some possess geological evidence for large-scale sector collapse into the sea. Large scale mass-flow deposits have not been mapped on the seafloor south of the Aleutian Islands, in part because most of the area has never been examined at the resolution required to identify such features, and in part because of the complex nature of erosional and depositional processes. Extensive submarine landslide deposits and debris flows are known on the north side of the arc and are common in similar settings elsewhere and thus they likely exist on the trench slope south of the Aleutian Islands. Because the Aleutian arc is surrounded by deep, open ocean, mass flows of unconsolidated debris that originate either as submarine landslides or as volcanic debris avalanches entering the sea may be potential tsunami sources.To test this hypothesis we present a series of numerical simulations of submarine mass-flow initiated tsunamis from eight different source areas. We consider four submarine mass flows originating in submarine canyons and four flows that evolve from submarine landslides on the trench slope. The flows have lengths that range from 40 to 80 km, maximum thicknesses of 400–800 m, and maximum widths of 10–40 km. We also evaluate tsunami generation by volcanic debris avalanches associated with flank collapse, at four locations (Makushin, Cleveland, Seguam and Yunaska SW volcanoes), which represent large to moderate sized events in this region. We calculate tsunami sources using the numerical model TOPICS and simulate wave propagation across the Pacific using a spherical Boussinesq model, which is a modified version of the public domain code FUNWAVE. Our numerical simulations indicate that geologically plausible mass flows originating in the North Pacific near the Aleutian Islands can indeed generate large local tsunamis as well as large transoceanic tsunamis. These waves may be several meters in elevation at distal locations, such as Japan, Hawaii, and along the North and South American coastlines where they would constitute significant hazards.     

Changing debris flow activity after sudden sediment input: a case study from the Swiss Alps

On 27 December 2011, a rock avalanche in the upper Val Bondasca in the southern Swiss Alps deposited 1.5–1.7 million m³ of rock debris. The following summer, debris flow activity in Val Bondasca was unusually high with four events after a 90‐year period of debris flow inactivity. This was an exceptional situation for the valley. Analysing the 2012 events, the long‐term record of meteorological conditions such as rainfall intensity and duration, in comparison with debris flow activity, suggests that the meteorological conditions in summer 2012 would not have triggered the high intensity debris flow events without additional sediment input. Consequently, the suddenly increased debris availability can be considered a major factor in these events. Interestingly, rainfall events of similar magnitude in the subsequent years 2013–2015 did not trigger additional debris flow events, indicating that debris flow initiation thresholds are increasing again, back towards pre‐rock avalanche levels. This study aims to help in understanding the so far poorly understood temporal evolution of debris flow triggering thresholds and the effect of sudden changes in sediment availability.     

Potential Flank-Collapse of Soufrière Volcano, Guadeloupe, Lesser Antilles? Numerical Simulation and Hazards

The past history of recurrent flank collapses of la Soufrière volcano of Guadeloupe, its structure, its well-developed hydrothermal system and the current activity constitute factors that could promote a future flank collapse, particularly in the case of a significant increase of activity, with or without shallow magmatic input. To address the hazards associated with such a collapse, we model the emplacement of the debris avalanche generated by a flank-collapse event in 1,250 BC (3,100 years B.P.). We use a finite-difference grain-flow model solving mass and momentum conservation equations that are depth-averaged over the slide thickness, and a Coulomb-type friction law with a variable basal (minimum) friction angle. Using the parameter values determined from this simulation, we then simulate the debris avalanche which could be generated by a potential collapse of the present lava dome. We then discuss the region which could be affected by such a future collapse, and additional associated hazards of concern.     

A Middle Miocene carbonate embankment on an active volcanic slope: Ilhéu de Baixo,Madeira Archipelago,Eastern Atlantic

Carbonate factories on insular oceanic islands in active volcanic settings are poorly explored. This case study illuminates marginal limestone deposits on a steep volcanic flank and their recurring interruption by deposits linked to volcaniclastic processes. Historically known as Ilhéu da Cal (Lime Island), Ilhéu de Baixo was separated from Porto Santo, in the Madeira Archipelago, during the course of the Quaternary. Here, extensive mines were tunnelled in the Miocene carbonate strata for the production of slaked lime. Approximately 10 000 m³ of calcarenite (−1 to 1ø) was removed by hand labour from the Blandy Brothers mine at the south end of the islet. Investigations of two stratigraphic sections at opposite ends of the mine reveal that the quarried material represents an incipient carbonate ramp developed from east to west and embanked against the flank of a volcanic island. A petrographic analysis of limestones from the mine shows that coralline red algae from crushed rhodoliths account for 51% of all identifiable bioclasts. This material was transported shoreward and deposited on the ramp between normal wave base and storm wave base at moderate depths. The mine's roof rocks are formed by Surtseyan deposits from a subsequent volcanic eruption. Volcaniclastic density flows also are a prevalent factor interrupting renewed carbonate deposition. These flows arrived downslope from the north and gradually steepened the debris apron westwards. Slope instability is further shown by a coral rudstone density flow that followed from growth of a coral reef dominated by Pocillopora madreporacea (Lamarck), partial reef collapse, and transport from a more easterly direction into a fore‐reef setting. The uppermost facies represents a soft bottom at moderate depths in a quiet, but shore‐proximal setting. Application of this study to a broader understanding of the relationship between carbonate and volcaniclastic deposition on oceanic islands emphasizes the susceptibility of carbonates to dilution and complete removal by density flows of various kinds, in contrast to the potential for preservation beneath less‐disruptive Surtseyan deposits. Copyright © 2013 John Wiley & Sons, Ltd.     

The Cascade rock avalanche: implications of a very large Alpine Fault-triggered failure,New Zealand

Catastrophic deep-seated rock slope failures (RSFs; e.g., rock avalanches) can be particularly useful proxies for fault rupture and strong ground motion, and currently represent an underappreciated hazard of earthquakes in New Zealand. This study presents observations of the previously undescribed Cascade rock avalanche (CRA), a c. 0.75 km³ single-event, long-runout, catastrophic failure interpreted to have been coseismically triggered by a large to great earthquake c. 660 AD on the Alpine Fault. Despite its size and remarkable preservation, the CRA deposit has been previously identified as a terminal moraine and fault-damaged outcrop, highlighting the common misinterpretation of similar rock avalanche deposits. Comparisons are drawn between the CRA and other Alpine Fault-attributed rock avalanches, such as the better-studied c. 860 AD Round Top rock avalanche, to re-assess coseismic rock avalanche hazard. Structural relationships indicate the rock mass comprising the CRA may have formerly been a portion of a larger (c. 3 km³) RSF, before its catastrophic collapse on a deep-seated gravitational collapse structure (sackung). Sackungen and RSFs are common throughout the Southern Alps and other mountainous regions worldwide; in many cases, they should be considered potential precursors to catastrophic failure events. Two masses of rock in the Cascade River Valley show precursory signs of potential catastrophic failures of up to c. 2 km³; a similar mass may threaten the town of Franz Josef.     

Build‐up and depositional dynamics of an arc front volcaniclastic complex: the Miocene Tepoztlán Formation (Transmexican Volcanic Belt,Central Mexico)

Volcanic terrains such as magmatic arcs are thought to display the most complex surface environments on Earth. Ancient volcaniclastics are notoriously difficult to interpret as they describe the interplay between a single or several volcanoes and the environment. The Early Miocene Tepoztlán Formation at the southern edge of the Transmexican Volcanic Belt belongs to the few remnants of this ancestral magmatic arc, and therefore is thought to represent an example of the initial phase of evolution of the Transmexican Volcanic Belt. Based on geological mapping, detailed logging of lithostratigraphic sections, palaeocurrent data of sedimentary features and anisotropy of magnetic susceptibility, mapping of two‐dimensional panels from outcrop to field scale, and geochronological data in an area of ca 1000 km², three periods in the evolution of the Tepoztlán Formation were distinguished, which lasted around 4 Myr and are representative of a volcanic cycle (edifice growth phases followed by collapse) in a magmatic arc setting. The volcaniclastic sediments accumulated in proximal to medial distances on partly coalescing aprons, similar to volcanic ring plains, around at least three different stratovolcanoes. These volcanoes resulted from various eruptions separated by repose periods. During the first phase of the evolution of the Tepoztlán Formation (22·8 to 22·2 Ma), deposition was dominated by fluvial sediments in a braided river setting. Pyroclastic material from small, andesitic–dacitic composite volcanoes in the near vicinity was mostly eroded and reworked by fluvial processes, resulting in sediments ranging from cross‐bedded sand to an aggradational series of river gravels. The second phase (22·2 to 21·3 Ma) was characterized by periods of strong volcanic activity, resulting in voluminous accumulations of lava and tuff, which temporarily overloaded and buried the original fluvial system with its detritus. Continuous build‐up of at least three major volcanic centres further accentuated the topography and, in the third phase (21·3 to 18·8 Ma), mass flow processes, represented by an increase of debris flow deposits, became dominant, marking a period of edifice destruction and flank failures.     

Distribution and characteristics of landslides induced by the Iwate–Miyagi Nairiku Earthquake in 2008 in Tohoku District, Northeast Japan

The Iwate–Miyagi Nairiku Earthquake in 2008, whose seismic intensity was M. 7.2 in Japan Meteorological Agency (JMA) scale, induced innumerable landslides on the southern flank of Mt. Kurikoma volcano allocated along the Ou Backbone Range in Northeast Japan. Most landslides are detected in a hanging wall side of the seismic fault. Those landslides are classified into five types: deep-seated slide, debris slide, shallow debris slide, secondary shallow debris slide, and debris flow. Most common landslide types induced by the earthquake are shallow debris slides and subsequent debris flows. They are intensively distributed along steep gorges incising a volcanic skirt of Mt. Kurikoma, consisting of welded ignimbrite of the Pleistocene age. Debris flows are also distributed even along gentle river floors in the southern lower flank of the volcano. The area of densely distributed debris slides, shallow debris slides, and debris flows is concordant with that of severe seismic tremor. Thus, genetic processes of landslides induced by the Iwate–Miyagi Nairiku Earthquake in 2008 are attributed to multiple causative factors such as geology, topography, and seismic force.     

Evolution of Irruputuncu volcano,Central Andes,northern Chile

The Irruputuncu is an active volcano located in northern Chile within the Central Andean Volcanic Zone (CAVZ) and that has produced andesitic to trachy-andesitic magmas over the last ∼258 ± 49 ka. We report petrographical and geochemical data, new geochronological ages and for the first time a detailed geological map representing the eruptive products generated by the Irruputuncu volcano. The detailed study on the volcanic products allows us to establish a temporal evolution of the edifice. We propose that the Irruputuncu volcanic history can be divided in two stages, both dominated by effusive activity: Irruputuncu I and II. The oldest identified products that mark the beginning of Irruputuncu I are small-volume pyroclastic flow deposits generated during an explosive phase that may have been triggered by magma injection as suggested by mingling features in the clasts. This event was followed by generation of large lava flows and the edifice grew until destabilization of its SW flank through the generation of a debris avalanche, which ended Irruputuncu I. New effusive activity generated lavas flows to the NW at the beginning of Irruputuncu II. In the meantime, lava domes that grew in the summit were destabilized, as shown by two well-preserved block-and-ash flow deposits. The first phase of dome collapse, in particular, generated highly mobile pyroclastic flows that propagated up to ∼8 km from their source on gentle slopes as low as 11° in distal areas. The actual activity is characterized by deposition of sulfur and permanent gas emissions, producing a gas plume that reaches 200 m above the crater. The maximum volume of this volcanic system is of ∼4 km³, being one of the smallest active volcano of Central Andes.