Fission track and fault kinematics analyses for new insight into the Late Cenozoic tectonic regime changes in West-Central Sulawesi (Indonesia)

A 3-D density model for the Cretan and Libyan Seas and Crete was developed by gravity modelling constrained by five 2-D seismic lines. Velocity values of these cross-sections were used to obtain the initial densities using the Nafe–Drake and Birch empirical functions for the sediments, the crust and the upper mantle. The crust outside the Cretan Arc is 18 to 24 km thick, including 10 to 14 km thick sediments. The crust below central Crete at its thickest section, has values between 32 and 34 km, consisting of continental crust of the Aegean microplate, which is thickened by the subducted oceanic plate below the Cretan Arc. The oceanic lithosphere is decoupled from the continental along a NW–SE striking front between eastern Crete and the Island of Kythera south of Peloponnese. It plunges steeply below the southern Aegean Sea and is probably associated with the present volcanic activity of the southern Aegean Sea in agreement with published seismological observations of intermediate seismicity. Low density and velocity upper mantle below the Cretan Sea with ρ  3.25 × 10³ kg/m³ and V_p velocity of compressional waves around 7.7 km/s, which are also in agreement with observed high heat flow density values, point out at the mobilization of the upper mantle material here. Outside the Hellenic Arc the upper mantle density and velocity are ρ ≥ 3.32 × 10³ kg/m³ and V_p = 8.0 km/s, respectively. The crust below the Cretan Sea is thin continental of 15 to 20 km thickness, including 3 to 4 km of sediments. Thick accumulations of sediments, located to the SSW and SSE of Crete, are separated by a block of continental crust extended for more than 100 km south of Central Crete. These deep sedimentary basins are located on the oceanic crust backstopped by the continental crust of the Aegean microplate. The stretched continental margin of Africa, north of Cyrenaica, and the abruptly terminated continental Aegean microplate south of Crete are separated by oceanic lithosphere of only 60 to 80 km width at their closest proximity. To the east and west, the areas are floored by oceanic lithosphere, which rapidly widens towards the Herodotus Abyssal plain and the deep Ionian Basin of the central Mediterranean Sea. Crustal shortening between the continental margins of the Aegean microplate and Cyrenaica of North Africa influence the deformation of the sediments of the Mediterranean Ridge that has been divided in an internal and external zone. The continental margin of Cyrenaica extends for more than 80 km to the north of the African coast in form of a huge ramp, while that of the Aegean microplate is abruptly truncated by very steep fractures towards the Mediterranean Ridge. Changes in the deformation style of the sediments express differences of the tectonic processes that control them. That is, subduction to the northeast and crustal subsidence to the south of Crete. Strike-slip movement between Crete and Libya is required by seismological observations.     

Moho topography and lower crustal wide-angle reflectivity around the TESZ in southern Scandinavia and northeastern Europe

The Moho topography is strongly undulating in southern Scandinavia and northeastern Europe. A map of the depth to Moho shows similarities between the areas of the Teisseyre–Tornquist Zone (TTZ) in Poland and the Fennoscandian Border Zone (FBZ), which is partly coinciding with the Sorgenfrei–Tornquist Zone (STZ) in Denmark. The Moho is steeply dipping at these zones from a crustal thickness of approximately 32 km in the young Palaeozoic Platform and basin areas to approximately 45 km in the old Precambrian Platform and Baltic Shield. The Moho reflectivity (P_MP waveform) in the POLONAISE'97 refraction/wide-angle seismic data from Poland and Lithuania is variable, ranging from ‘sharp’ to strongly reverberating signals of up to 2 s duration. There is little or no lower crustal wide-angle reflectivity in the thick Precambrian Platform, whereas lower crustal reflectivity in the thin Palaeozoic Platform is strongly reverberating, suggesting that the reflective lower crust and upper mantle is a young phenomena. From stochastic reflectivity modelling, we conclude that alternating high- and low-velocity layers with average thicknesses of 50–300 m and P-wave velocity variations of ±3–4% of the background velocity can explain the lower crustal reflectivity. Sedimentary layering affects the reflectivity of deeper layers significantly and must be considered in reflectivity studies, although the reverberations from the deeper crust cannot be explained by the sedimentary layering only. The reflective lower crust and upper mantle may correspond to a zone that has been intruded by mafic melts from the mantle during crustal extension and volcanism.     

南海北部陆缘地壳结构特征及其构造过程

根据“北部湾大陆缘地壳结构ＰＳ转换波测深”等地球物理测量结果,本文研究了南海北部陆缘的地壳结构特征,讨论了其白垩纪以来的构造过程。地球物理测量表明,由陆向海,南海北部陆缘地壳由陆壳、过渡壳变为洋壳,厚度由３４ｋｍ减薄至８ｋｍ左右。垂向上地壳为３层结构模式。陆壳、过渡壳和洋壳的下地壳Ｐ波速度普遍较高。地壳伸展系数的计算表明南海北部陆缘伸展主要发育于陆坡地区。结合区域地质研究,本文认为：南海北部陆缘及     

The southern margin of the East European Craton: new results from seismic sounding and potential fields between the North Sea and Poland

The extension of eastern Avalonia from Britain through the NE German Basin into Poland is, in some sense, a virtual structure. It is covered almost everywhere by late Paleozoic and younger sediments. Evidence for this terrane is only gathered from geophysical data and age information derived from magmatic rocks. During the last two decades, much geophysical and geological information has been gathered since the European Geotraverse (EGT), which was followed by the BABEL, LT-7, MONA LISA, DEKORP-Basin'96, and POLONAISE'97 deep seismic experiments. Based on seismic lines, a remarkable feature has been observed between the North Sea and Poland: north of the Elbe Line (EL), the lower crust is characterised by high velocities (6.8–7.0 km/s), a feature which seems to be characteristic for at least a major part of eastern Avalonia (far eastern Avalonia). In addition, the seismic lines indicate that a wedge of the East European Craton (EEC) (or Baltica) continues to the south below the southern Permian Basin (SPB)—a structure which resembles a passive continental margin. The observed pattern may either indicate an extension of the Baltic crust much farther south than earlier expected or oceanic crust of the Tornquist Sea trapped during the Caledonian collision. In either case, the data require a reinterpretation of the docking mechanism of eastern Avalonia, and the Elbe–Odra Line (EOL), as well as the Elbe Fault system, together with the Intra-Sudedic Faults, appear to be related to major changes in the deeper crustal structures separating the East European crust from the Paleozoic agglomeration of Middle European terranes.     

Crustal Structure across the Northwestern Margin of South China Sea: Evidence for Magma‐poor Rifting from a Wide‐angle Seismic Profile

We present results from a 484 km wide-angle seismic profile acquired in the northwest part of the South China Sea (SCS) during OBS2006 cruise. The line that runs along a previously acquired multi-channel seismic line (SO49-18) crosses the continental slope of the northern margin, the Northwest Subbasin (NWSB) of the South China Sea, the Zhongsha Massif and partly the oceanic basin of the South China Sea. Seismic sections recorded on 13 ocean-bottom seismometers were used to identify refracted phases from the crustal layer and also reflected phases from the crust-mantle boundary (Moho). Inversion of the traveltimes using a simple start model reveals crustal images in the study area. The velocity model shows that crustal thickness below the continental slope is between 14 and 23 km. The continental part of the line is characterized by gentle landward mantle uplift and an abrupt oceanward one. The velocities in the lower crust do not exceed 6.9 km/s. With the new data we can exclude a high-velocity lower crustal body (velocities above 7.0 km/s) at the location of the line. We conclude that this part of the South China Sea margin developed by a magma-poor rifting. Both, the NWSB and the Southwest Sub-basin (SWSB) reveal velocities typical for oceanic crust with crustal thickness between 5 and 7 km. The Zhongsha Massif in between is extremely stretched with only 6–10 km continental crust left. Crustal velocity is below 6.5 km/s; possibly indicating the absence of the lower crust. Multi-channel seismic profile shows that the Yitongansha Uplift in the slope area and the Zhongsha Massif are only mildly deformed. We considered them as rigid continent blocks which acted as rift shoulders of the main rift subsequently resulting in the formation of the Northwest Sub-basin. The extension was mainly accommodated by a ductile lower crustal flows, which might have been extremely attenuated and flow into the oceanic basin during the spreading stage. We compared the crustal structures along the northern margin and found an east-west thicken trend of the crust below the continent slope. This might be contributed by the east-west sea-floor spreading along the continental margin.     

Crustal structure in an onshore–offshore transitional zone near Hong Kong,northern South China Sea

To study the crustal structure beneath the onshore–offshore transitional zone, a wide-angle onshore–offshore seismic experiment was carried out in northern South China Sea near Hong Kong, using large volume airgun sources at sea and seismic stations on land. The crustal velocity model constructed from traveltime fitting shows that the sedimentary thickness abruptly increases seaward of the Dangan Islands based on the characteristics of Pg and Multiple Pg, and the crustal structure beneath the sedimentary layer is relatively simple. The Moho depth is about 25–28 km along the profile and the P-wave velocity increases gradually with depth. The velocities in the upper crust range from 5.5 to 6.4 km/s, while that in the lower crust is 6.4–6.9 km/s. It also reveals a low velocity zone with a width of more than 10 km crossing the crust at about 75–90 km distance, which suggests that the Littoral Fault Zone (LFZ) exists beneath the onshore–offshore transitional zone. The magnetism anomalies, bouguer gravity anomalies and active seismic zone along the coastline imply the LFZ is a main tectonic fault in the onshore–offshore area. Combined with two previously published profiles in the continental South China (L–G profile) and in the northern margin of South China Sea (OBS1993) respectively, we constructed a land-sea super cross-section about 1000 km long. The results show the onshore–offshore transitional zone is a border separating the unstretched and the stretched continental crust. The low velocity layer (LVL) in the middle crust was imaged along L–G profile. However, the high velocity layer (HVL) in the lower crust was detected along OBS1993. By analyzing the mechanisms of the LVL in the middle crust and HVL in the base of crust, we believe the crustal structures had distinctly different attributes in the continental South China and in the northern SCS, which indicates that the LFZ could be the boundary fault between them.     

Crustal density structure from 3D gravity modeling beneath Himalaya and Lhasa blocks,Tibet

The Himalaya and Lhasa blocks act as the main belt of convergence and collision between the Indian and Eurasian plates. Their crustal structures can be used to understand the dynamic process of continent–continent collision. Herein, we present a 3D crustal density model beneath these two tectonic blocks constrained by a review of all available active seismic and passive seismological results on the velocity structure of crust and lower lithosphere. From our final crustal density model, we infer that the present subduction-angle of the Indian plate is small, but presents some variations along the west–east extension of the orogenic belt: The dip angle of the Moho interface is about 8–9° in the eastern and western part of the orogenic belt, and about 16° in the central part. Integrating crustal P-wave velocity distribution from wide-angle seismic profiling, geothermal data and our crustal density model, we infer a crustal composition model, which is composed of an upper crust with granite–granodiorite and granite gneiss beneath the Lhasa block; biotite gneiss and phyllite beneath the Himalaya, a middle crust with granulite facies and possible pelitic gneisses, and a lower crust with gabbro–norite–troctolite and mafic granulite beneath the Lhasa block. Our density structure (<3.2 g/cm³) and composition (no fitting to eclogite) in the lower crust do not be favor to the speculation of ecologitized lower crust beneath Himalaya and the southern of Lhasa block.     

Crustal structure of the Lofoten–Vesterålen continental margin, off Norway

By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.     

Lithological interpretation of crustal composition in the Fennoscandian Shield with seismic velocity data

In this study, we report the results of an investigation of lithological interpretation of the crust in the central Fennoscandian Shield (in Finland) using seismic wide-angle velocity models and laboratory measurements on P- and S-wave velocities of different rock types. The velocities adopted from wide-angle velocity models were compared with laboratory velocities of different rock types corrected for the crustal PT conditions in the study area. The wide-angle velocity models indicate that the P-wave velocity does not only increase step-wise at boundaries of major crustal layers, but there is also gradual increase of velocity within the layers. On the other hand, the laboratory measurements of velocities indicate that no single rock type is able to provide the gradual downward increasing trends. Thus, there must be gradual vertical changes in rock composition. The downward increase of velocities indicates that the composition of the crust becomes gradually more mafic with increasing depth. We have calculated vertical velocity profiles for a range of possible crustal lithological compositions. The Finnish crustal velocity profiles require a more mafic composition than an average global continental model would suggest. For instance, on the SVEKA'81 transect, the calculated models suggest that the crustal velocity profiles can be simulated with rock type mixtures where the upper crust consists of felsic gneisses and granitic–granodioritic rocks with a minor contribution of amphibolite and diabase. In the middle crust, the amphibolite proportion increases. The lower crust consists of tonalitic gneiss, mafic garnet granulite, hornblendite, pyroxenite and minor mafic eclogite. Assuming that these rock types are present in sufficiently extensive and thick layers, they would also have sufficiently high acoustic reflection coefficients for generating the generally well-developed reflectivity in the crust in the central part of the shield. Density profiles calculated from the lithological models suggest that there is practically no density contrast at Moho in areas of the high-velocity lower crust. Comparison of reflectors from FIRE-1 and FIRE-3 transects and the velocity model from SVEKA'81 wide-angle transect indicated that the reflectors correlate with velocity layering, but the three-dimensional structures of the crust complicate such comparisons.     

Overview of the Late Tertiary–Recent tectonic and palaeo-environmental development of the Mediterranean region

The Late Tertiary history of the Mediterranean region exemplifies processes of ocean basin closure and continental collision, as determined from integrated land and marine evidence. During the Mesozoic–Early Tertiary, tectonic settings were dominated by evolution of Neotethys. This ocean generally widened eastwards, with a number of oceanic strands in the Eastern Mediterranean area. Great diversity of tectonic settings and palaeo-environments developed during the Tertiary closure history of these oceanic basins. In the Eastern Mediterranean region, more northerly Neotethyan strands were closed by the Mid Tertiary, while oceanic crust remained in the south in the present Eastern Mediterranean Sea area. Northwards subduction of the remaining southerly Neotethyan strand was probably active by the Early Miocene. Different areas exhibit different stages of convergence and ocean basin closure. In the east, the amalgamated Eurasian plate had collided with the Arabian margin (Africa) by the Late Miocene, while oceanic crust still persisted further west. Steady-state subduction during the Late Tertiary gave rise to the Mediterranean ridge, as a substantial mud-dominated accretionary wedge. In the Aegean area, sufficient northward subduction took place to activate arc volcanism and pervasive back arc extension, short of marginal basin opening. In the easternmost Mediterranean, only limited subduction took place, associated with supra-subduction zone extension (e.g. in Cyprus). Today, steady state-subduction continues only locally, where vestiges of Neotethys remain (e.g. Herodotus abyssal plain). In the Western Mediterranean area, suturing of the African and Eurasian plates initially took place in the Betic region (Early–Mid Tertiary), where the Neotethys had existed only as a narrow connection with the Central North Atlantic. In the Central Mediterranean region, where the Western Neotethys was wider, northward subduction was active, apparently as early as the Late Cretaceous. In a widely accepted interpretation, an Andean-type magmatic arc developed along the southern margin of Europe and was then rifted off in the Late Oligocene-Early Miocene, to form the Corsica-Sardinia Block, opening the North Balearic marginal basin in its wake. The migrating subduction zone and microcontinent then collided diachronously with North Africa-related continental units (North Africa and Apulia) from Late Oligocene-Early Miocene, giving rise to collisional thrust belts in the Northern and Southern Apennines and along the North African continental margin (i.e. the Maghrebian chain) to the Betic-Rif area. From the Early Miocene onwards, a separate subduction system became active, related to removal of Neotethyan oceanic crust to the southeast (Ionian Sea), fueling suprasubduction zone extension and opening of the Tyrrhenian Sea. ‘Orogenic collapse’ is an alternative mechanism of such extension, and is widely believed to have caused divergent thrusting in the Betic and Rif regions of the westernmost Mediterranean, at the same time as crustal extension and subsidence of the Alboran Sea.     

Seismological features of island arc crust as inferred from recent seismic expeditions in Japan

Crustal studies within the Japanese islands have provided important constraints on the physical properties and deformation styles of the island arc crust. The upper crust in the Japanese islands has a significant heterogeneity characterized by large velocity variation (5.5–6.1 km/s) and high seismic attenuation (Qp=100–400 for 5–15 Hz). The lateral velocity change sometimes occurs at major tectonic lines. In many cases of recent refraction/wide-angle reflection profiles, a “middle crust” with a velocity of 6.2–6.5 km/s is found in a depth range of 5–15 km. Most shallow microearthquakes are concentrated in the upper/middle crust. The velocity in the lower crust is estimated to be 6.6–7.0 km/s. The lower crust often involves a highly reflective zone with less seismicity, indicating its ductile rheology. The uppermost mantle is characterized by a low Pn velocity of 7.5–7.9 km/s. Several observations on PmP phase indicate that the Moho is not a sharp boundary with a distinct velocity contrast, but forms a transition zone from the upper mantle to the lower crust. Recent seismic reflection experiments revealed ongoing crustal deformations within the Japanese islands. A clear image of crustal delamination obtained for an arc–arc collision zone in central Hokkaido provides an important key for the evolution process from island arc to more felsic continental crust. In northern Honshu, a major fault system with listric geometry, which was formed by Miocene back arc spreading, was successfully mapped down to 12–15 km.     

Palaeozoic amalgamation of Central Europe: new results from recent geological and geophysical investigations

Multidisciplinary studies of geotransects across the North European Plain and Southern North Sea, and geological reexamination of the Variscides of the North Bohemian Massif, permit a new 3-D reassessment of the relationships between the principal crustal blocks abutting Baltica along the Trans-European Suture Zone (TESZ). Accretion was in three stages: Cambrian accretion of the Bruno–Silesian, Lysogory and Malopolska terranes; end-Ordovician/early Silurian accretion of Avalonia; and early Carboniferous accretion of the Armorican Terrane Assemblage (ATA). Palaeozoic plume-influenced metabasite geochemistry in the Bohemian Massif explains the progressive rifting away of peri-Gondwanan crustal blocks before their accretion to Baltica. Geophysical data, faunal and provenance information from boreholes, and dated small inliers and cores confirm that Avalonian crust extends beyond the Anglo-Brabant Deformation Belt eastwards to northwest Poland. The location and dip of reflectors along the TESZ and beneath the North European Plain suggest that Avalonian crust overrode the Baltica passive margin, marked by a high-velocity lower crustal layer, on shallowly southwest-dipping thrust planes forming the Heligoland–Pomerania Deformation Belt. The “Variscan orocline” of southwest Poland masks two junctions between the Armorican Terrane Assemblage (ATA) and previously accreted crustal blocks. To the east is a dextrally transpressive contact with the Bruno–Silesian and Malopolska blocks, accreted in the Cambrian, while to the north is a thrust contact with easternmost Avalonia, deeply buried beneath younger sedimentary cover. In the northeast Bohemian and Rhenohercynian Massifs Devonian “early Variscide” deformation dominated by WNW and NW-directed thrusting, records closure of Ordovician–Devonian seaways between detached “islands” of the ATA and Avalonia.     

Lithospheric structure of the Southwest South China Sea: implications for rifting and extension

ABSTRACT

The South China Sea (SCS) is an excellent site for studying the process of conjugate margin rifting, and the origin and evolution of oceanic basins. Compared with the well-defined northern margin of the SCS, the western and southern segments of the SCS margin have not been researched in significant detail. To investigate the regional structure of the southwestern SCS, a gravity model is constructed, along with the lithospheric thermal structure along a wide-angle seismic profile. The profile extends across the conjugate margins of the Southwest Sub-Basin (SWSB) of the SCS and is based on the latest multiple geophysical measurements (including heat flow and thermo-physical parameters). The results show that the average thicknesses of the crust and thermal lithosphere along the profile are about 15 km and 57 km, respectively. The overall amount of extension of continental crust and lithosphere is more than 200 km. Thermal structure of the lithosphere shows that the continental margins are in a warm thermal state. The southwest SCS is characterized by ultra-wide, thinned continental crust and lithosphere, high Moho heat flow, early syn-rift faulted basins, undeformed late syn-rifting, and high seismic velocities in the lower crust. These various pieces of evidence suggest that the break-up of the mantle lithosphere occurred before that of the continental crust favouring a depth-dependent extension of the southwestern SCS margin.     

大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示

综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。     

A three-dimensional crustal model of southwest Germany derived from seismic refraction data

From densely covered seismic refraction data obtained in 1978 (Urach experiment) and 1984 (“Schwarzer Zollern-Wald” experiment) and from seismic reflection data and results from previous refraction investigations, a three-dimensional crustal model of southwest Germany was derived. Travel-time and amplitude information of seismic refraction data were interpreted with two-dimensional forward modeling (ray tracing) to calculate two crustal cross sections in southwest Germany. These results fill a gap in the existing data and enabled the construction of a detailed three-dimensional crustal model.While seismically the upper crust is laterally homogeneous (5.9–6.0 km/s) throughout the area, the middle and lower crust show pronounced lateral variations in thickness, velocity, and reflectivity. The Moho is a flat surface at a relatively shallow depth (25–26 km). We classify the middle and lower crust of southwest Germany into two characteristic crustal types. Type I consists of a mid-crustal low-velocity zone (5.4–5.8 km/s) overlying a thick (> 10 km), high-velocity (6.6–6.8 km/s) lower crust. Type II has no prominent mid-crustal low-velocity zone, and a thin (< 10 km), low-velocity (6.3–6.4 km/s) lower crust. The crustal types correlate with the major geologic units exposed in the area: Type I is present beneath the Black Forest, forming the eastern flank of the Rhinegraben and beneath the Swabian Jura, while Type II is present beneath the intervening Triassic sediments. Beneath the South German Molasse Basin, a low-velocity zone is also present in the upper middle-crust. Seismic reflection investigations have shown that the lower crust in southwest Germany comprises a stack of layers of alternating high- and low-velocities. The lateral variation of the reflectivity of this laminated lower crust has been recognized even on refraction data. We found that high-reflectivity of the lower crust correlates to high average velocity (6.7–6.8 km/s) in the lower crust (Type I). Thus, the average velocity of the lower crust in southwest Germany seems to be an indicator of the intensity of its lamination. The uppermost mantle has a velocity of 8.3 km/s in the area and a strong, positive velocity gradient.     

Crustal observations beneath the southern North Sea and their tectonic and geological implications

In 1991, a deep seismic reflection line, MPNI-9101, was acquired in the southern North Sea from the Mesozoic Broad Fourteens Basin, across the West Netherlands Basin onto the London-Brabant Massif (LBM). The resultant section shows a strongly reflective lower crust beneath the area of Mesozoic basin development. This lower crustal reflectivity continues to be strong beneath the LBM. The travel time to the base of the reflective zone increases from approximately 11.0 s beneath the Mesozoic basins to 12.5 s beneath the LBM, suggesting a southward thickening of the crust (Rijkers et al., 1993). Based on these travel times and information from deep wells and refraction surveys. Moho depth is estimated to increase from about 31 km beneath the Mesozoic basins to about 38 km beneath the LBM. This difference in depth to the Moho can partly be explained by coaxial stretching of the crust beneath the Mesozoic basins. In comparison with the Mesozoic basins, the crust beneath the LBM was thickened during the Caledonian and Variscan orogenies.     

长江中下游成矿带及邻区地壳结构——MASH成矿过程的P波接收函数成像证据？

利用长江中下游成矿带多学科深部探测剖面于2009年11月至2011年3月间采集的天然地震数据,通过天然地震接收函数成像等分析研究,得到了研究区地壳和上地幔结构的清晰图像。接收函数成像结果显示研究区内Moho面深度存在着明显的起伏变化,在长江中下游成矿带(指剖面穿过的长江中下游成矿带宁芜矿集区,下同)下方存在着"幔隆构造"。在剖面东南端(即扬子克拉通北缘),Moho面相对稳定,深度约为30km;在茅山和江南断裂附近,Moho面存在上下起伏现象;在剖面中部或宁芜矿集区下方,Moho面存在明显隆起,深度只有28km;在郯庐断裂带下方,Moho面明显加深,深度达到36km;进一步向北到华北地台南缘,Moho面深度逐渐恢复到了32km左右的平均深度水平。其次,我们在接收函数成像结果中发现,长江中下游成矿带与其周边下地壳结构存在着明显的差异,成矿带的下地壳具有显著的地震波方位各向异性。扬子克拉通北缘的下地壳呈高速的近水平状结构,地震波各向异性特征不明显;与此相比,长江中下游成矿带的下地壳虽然也呈近水平状结构特征,但是,对于沿成矿带走向方向传播的地震波,其下地壳具有高速特征,而对于垂直于成矿带走向方向上传播的地震波,其下地壳却又表现为低速特征,这意味着成矿带的下地壳存在着平行于成矿带走向(即近北东—南西)方向的地震波各向异性,我们解释其是下地壳熔融并沿成矿带走向水平流动导致矿物晶体定向排列的结果。最后,在郯庐断裂以西的华北地台南缘观测到一条从上地壳延伸到中下地壳的南南东向倾斜的转换震相,我们推测它可能是合肥盆地内地壳伸展构造的反映。此外,我们发现接收函数成像结果中观测到的"幔隆构造"与远震P波层析成像结果在成矿带下方150km深度上显示的上地幔低速异常(江国明等,另文发表)存在着良好的对应关系,我们解释它们是软流圈物质上涌的遗迹。综合天然地震接收函数成像、远震P波层析成像和前人关于岩浆岩等方面的研究成果,我们认为长江中下游成矿带现今的下地壳可能是中生代发生成矿作用的多级岩浆房系统的一部分,成矿带的形成可能是类似MASH过程的产物。首先,软流圈物质上涌导致了长江中下游成矿带及其周边拉张环境的形成,在其上部地壳中形成了一系列伸展构造;然后,软流圈物质通过底侵进入长江中下游成矿带的原下地壳并与原下地壳物质发生同化作用,形成类埃达克质岩浆;接着,类埃达克质岩浆沿着伸展、拆离构造上升到地壳浅部形成不同层次的岩浆房和侵入岩体,并与围岩作用形成矿床。     

Seismicity of the Hellenic subduction zone in the area of western and central Crete observed by temporary local seismic networks

Temporary local seismic networks were installed in western Crete, in central Crete, and on the island Gavdos south of western Crete, respectively, in order to image shallow seismically active zones of the Hellenic subduction zone.More than 4000 events in the magnitude range between −0.5 and 4.8 were detected and localized. The resulting three-dimensional hypocenter distribution allows the localization of seismically active zones in the area of western and central Crete from the Mediterranean Ridge to the Cretan Sea. Furthermore, a three-dimensional structural model of the studied region was compiled based on results of wide-angle seismics, surface wave analysis and receiver function studies. The comparison of the hypocenter distribution and the structure has allowed intraplate and interplate seismicity to be distinguished.High interplate seismicity along the interface between the subducting African lithosphere and the Aegean lithosphere was found south of western Crete where the interface is located at about 20 to 40 km depth. An offset between the southern border of the Aegean lithosphere and the southern border of active interplate seismicity is observed. In the area of Crete, the offset varies laterally along the Hellenic arc between about 50 and 70 km.A southwards dipping zone of high seismicity within the Aegean lithosphere is found south of central Crete in the region of the Ptolemy trench. It reaches from the interface between the plates at about 30 km depth towards the surface. In comparison, the Aegean lithosphere south of western Crete is seismically much less active including the region of the Ionian trench. Intraplate seismicity within the Aegean plate beneath Crete and north of Crete is confined to the upper about 20 km. Between 20 and 40 km depth beneath Crete, the Aegean lithosphere appears to be seismically inactive. In western Crete, the southern and western borders of this aseismic zone correlate strongly with the coastline of Crete.     

Seismic structure in the northeastern South China Sea: S-wave velocity and Vp/Vs ratios derived from three-component OBS data

A nearly 500-km-long seismic profile with reflective and refractive wide-angle Ocean Bottom Seismometer (OBS) data and Multi-Channel Seismic (MCS) data was acquired across the northeastern continental margin of the South China Sea (SCS). The S-wave crustal structure and Vp/Vs ratios have been obtained based on a previously published P-wave model using the software RayInvr. Modeling of vertical- and horizontal-component OBS data yields information on the seismic crustal velocities, lithology, and geophysical properties along the OBS-2001 seismic profile. S-wave velocities in the model increase generally with depth but exhibit high spatial variability, particularly from the shelf to the upper slope of the northeastern SCS margin. Vp/Vs ratios also reveal significant lithological heterogeneity. Dongsha–Penghu Uplift (DPU) is a tectonic zone with a thicker crust than adjacent areas and a high magnetic anomaly. With a Vp/Vs of 1.74 and a P-wave velocity of 5.0–5.5 km/s, the DPU primarily consists of felsic volcanic rocks in the upper crust and is similar to the petrology of Zhejiang–Fujian volcanic provinces, which perhaps is associated with a Mesozoic volcanic arc. The ocean–continent transition (OCT) in the northeastern SCS is characterized by a thinning continental crust, volcanoes in the upper crust, and a high velocity layer (HVL) in the lower crust. The S-wave velocity and Vp/Vs ratio suggest that the HVL has a mafic composition that may originate from underplating of the igneous rocks beneath the passive rifted crust after the cessation of seafloor spreading.     

Systematic variations in seismic velocity and reflection in the crust of Cathaysia: New constraints on intraplate orogeny in the South China continent

The South China continent has a Mesozoic intraplate orogeny in its interior and an oceanward younging in postorogenic magmatic activity. In order to determine the constraints afforded by deep structure on the formation of these characteristics, we reevaluate the distribution of crustal velocities and wide-angle seismic reflections in a 400 km-long wide-angle seismic profile between Lianxian, near Hunan Province, and Gangkou Island, near Guangzhou City, South China. The results demonstrate that to the east of the Chenzhou-Linwu Fault (CLF) (the southern segment of the Jiangshan–Shaoxing Fault), the thickness and average P-wave velocity both of the sedimentary layer and the crystalline basement display abrupt lateral variations, in contrast to layering to the west of the fault. This suggests that the deformation is well developed in the whole of the crust beneath the Cathaysia block, in agreement with seismic evidence on the eastwards migration of the orogeny and the development of a vast magmatic province. Further evidence of this phenomenon is provided in the systematic increases in seismic reflection strength from the Moho eastwards away from the boundary of the CLF, as revealed by multi-filtered (with band-pass frequency range of 1–4, 1–8, 1–12 and 1–16 Hz) wide-angle seismic images through pre-stack migration in the depth domain, and in the P-wave velocity model obtained by travel time fitting. The CLF itself penetrates with a dip angle of about 22° to the bottom of the middle part of the crust, and then penetrates with a dip angle of less than 17° in the lower crust. The systematic variation in seismic velocity, reflection strength and discrepancy of extensional factors between the crust and the lithosphere, are interpreted to be the seismic signature of the magmatic activity in the interest area, most likely caused by the intrusion of magma into the deep crust by lithospheric extension or mantle extrusion.