Modes of orogen-parallel stretching and extensional exhumation in response to microplate indentation and roll-back subduction (Tauern Window, Eastern Alps)

The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.     

Alpine geodynamic evolution of passive and active continental margin sequences in the Tauern Window (eastern Alps, Austria, Italy): a review

The Penninic oceanic sequence of the Glockner nappe and the foot-wall Penninic continental margin sequences exposed within the Tauern Window (eastern Alps) have been investigated in detail. Field data as well as structural and petrological data have been combined with data from the literature in order to constrain the geodynamic evolution of these units. Volcanic and sedimentary sequences document the evolution from a stable continent that was formed subsequent to the Variscan orogeny, to its disintegration associated with subsidence and rifting in the Triassic and Jurassic, the formation of the Glockner oceanic basin and its consumption during the Upper Cretaceous and the Paleogene. These units are incorporated into a nappe stack that was formed during the collision between a Penninic Zentralgneis block in the north and a southern Austroalpine block. The Venediger nappe and the Storz nappe are characterized by metamorphic Jurassic shelf deposits (Hochstegen group) and Cretaceous flysch sediments (Kaserer and Murtörl groups), the Eclogite Zone and the Rote Wand–Modereck nappe comprise Permian to Triassic clastic sequences (Wustkogel quartzite) and remnants of platform carbonates (Seidlwinkl group) as well as Jurassic volcanoclastic material and rift sediments (Brennkogel facies), covered by Cretaceous flyschoid sequences. Nappe stacking was contemporaneous to and postdated subduction-related (high-pressure) eclogite and blueschist facies metamorphism. Emplacement of the eclogite-bearing units of the Eclogite zone and the Glockner nappe onto Penninic continental units (Zentralgneis block) occurred subsequent to eclogite facies metamorphism. The Eclogite zone, a former extended continental margin, was subsequently overridden by a pile of basement-cover nappes (Rote Wand–Modereck nappe) along a ductile out-of-sequence thrust. Low-angle normal faults that have developed during the Jurassic extensional phase might have been inverted during nappe emplacement.     

Sedimentological response to late Mesozoic subduction in the Penninic windows of the Eastern Alps

Late Mesozoic subduction of Penninic oceanic lithosphere finds its response in the sedimentary record. The corresponding sediments are deposited in a deep-sea trench environment and are developed as distal, partly proximal flysches, containing breccias and olistolites, which are up to kilometer-sized (wildflysch). In the Tauern window this facies is represented by the Nordrahmen zone, which is the equivalent to the Matrei zone. It is proposed to apply the term “Matrei zone” to the entire zone. It forms the high parts of the Bündner Schiefer and Tauernflysch formation. The olistolites derive from the unstable Austroalpine continental margin (Lower Austroalpine). In the Unterengadin window the wildflysch faciès is found in North, Middle and South Penninic position. In that there are kilometer-sized blocks of clearly Lower Austroalpine provenance in a North Penninic position, the Middle Penninic Tasna zone must already have been subducted at the time of emplacement of these olistolites. The Tasna zone itself contains a number of olistolites and disintegrates towards the northeast into a wildflysch zone. Its nappe character is discussed. After earlier fossil findings it is likely that the lower flysch zones of the Unterengadin window contain younger members than the higher ones. Thus, a mechanism of offscraping of the trench sediments and piling up in an accreting wedge above a subduction zone is proposed.     

Peak‐temperature patterns of polyphase metamorphism resulting from accretion,subduction and collision (eastern Tauern Window,European Alps) – a study with Raman microspectroscopy on carbonaceous material (RSCM)

Raman microspectroscopy on carbonaceous material (RSCM) from the eastern Tauern Window indicates contrasting peak‐temperature patterns in three different fabric domains, each of which underwent a poly‐metamorphic orogenic evolution: Domain 1 in the northeastern Tauern Window preserves oceanic units (Glockner Nappe System, Matrei Zone) that attained peak temperatures (T_p) of 350–480 °C following Late Cretaceous to Palaeogene nappe stacking in an accretionary wedge. Domain 2 in the central Tauern Window experienced T_p of 500–535 °C that was attained either within an exhumed Palaeogene subduction channel or during Oligocene Barrovian‐type thermal overprinting within the Alpine collisional orogen. Domain 3 in the Eastern Tauern Subdome has a peak‐temperature pattern that resulted from Eo‐Oligocene nappe stacking of continental units derived from the distal European margin. This pattern acquired its presently concentric pattern in Miocene time due to post‐nappe doming and extensional shearing along the Katschberg Shear Zone System (KSZS). T_p values in the largest (Hochalm) dome range from 612 °C in its core to 440 °C at its rim. The maximum peak‐temperature gradient (≤70 °C km^?1) occurs along the eastern margin of this dome where mylonitic shearing of the Katschberg Normal Fault (KNF) significantly thinned the Subpenninic‐ and Penninic nappe pile, including the pre‐existing peak‐temperature gradient.     

Evolution of quartz microstructures and textures during polyphase deformation within the Tauern Window (Eastern Alps)

The interior of the Tauern Window exposes underplated Penninic continental lithosphere and the overlying obducted Penninic oceanic crust within a large antiformal dome in the internal zone of the Eastern Alps. These units have been affected by a polyphase deformation history. Generally, three deformation events are distinguished. D₁ is related to underplating of, and top-to-the-N nappe stacking within, the Penninic continental units of the Tauern Window. Deformation stage D₂ is interpreted to reflect the subsequent continent collision between the Penninic continental units and the European foreland, D₃ is related to the formation of the dome structure within the Tauern Window. During thickening of continental lithosphere and nappe stacking (D₁), and subsequent intracontinental shortening (D₂), these tectonic units have been ductilely deformed close to a plane strain geometry. Conditions for the plastic deformation of the main rock-forming mineral phases (quartz, feldspar, dolomite, calcite) have prevailed during all three phases of crustal deformation. Generally, two types of quartz microstructures that are related to D₁ are distinguished within the Tauern Window: (a) Equilibrated and annealed fabrics without crystallographic preferred orientations (CPO) have only been observed in the central part of the southeastern Tauern Window, corresponding with amphibolite-grade metamorphic conditions. (b) In the northeastern and central part of the Tauern Window microstructures are characterized by quartz grains that show equilibrated shape fabrics, but well preserved CPO with type-I cross girdle distributions, indicating a deformation geometry close to plane strain. During D₂, two types of quartz microstructures are distinguished, too: (a) Quartz grains that show equilibrated shape fabrics, but well-preserved CPO. The c-axes distributions generally are characterized by type-I cross girdles, locally by type-II cross girdles, and in places, oblique single girdle distributions. (b) A second type of quartz microstructure is characterized by highly elongated grains and fabrics typical for dislocation creep and grain-boundary migration, and strong CPO. This type is restricted to the southern sections of the western and eastern Tauern Window. The c-axis distributions show type-I cross girdles in the western part of the Tauern Window and single girdles in the southeastern part. In the western part of the Tauern Window, a continuous transition from type (b) microstructures in the south to type (a) microstructures in the north is documented. The microstructural evolution also documents that the dome formation in the southeastern and western Tauern Window has already started during D₂ and has continued subsequent to the equilibration during amphibolite to greenschist facies metamorphism. D₃ is restricted to distinct zones of localized deformation. D₃-related quartz fabrics are characterized by the formation of ribbon grains; the c-axes show small-circle distributions around the Z-axis of the finite-strain ellipsoid. During exhumation and doming (D₃), deformation occurred under continuously decreasing temperatures.     

Late stage differential exhumation of crustal blocks in the central Eastern Alps: evidence from fission track and (U–Th)/He thermochronology

Thermal history modelling based on zircon‐ and apatite fission track and apatite (U–Th)/He data constrain and refine the near‐surface exhumation of the south‐eastern Tauern Window (Penninic units) and neighbouring Austroalpine basement units in the Eastern Alps. Fast exhumation on both sides of the Penninic/Austroalpine boundary coincides with a period of lateral extrusion and tectonic denudation of the Penninic units in Miocene time (22–12 Ma). The jump to older ages occurs within the Austroalpine unit along the Polinik fault, which therefore defines the boundary between the tectonically denuded units and the hangingwall at that time. According to the different (U–Th)/He ages between the Penninic Hochalm‐ and Sonnblick Domes we demonstrate a differential cooling history of these two domes in the latest Miocene and early Pliocene.     

Crystallization and very rapid exhumation of the youngest Alpine eclogites (Tauern Window,Eastern Alps) from Rb/Sr mineral assemblage analysis

Multimineral Rb/Sr internal isochrons from eclogite facies rocks of the Eclogite Zone (Tauern Window, Eastern Alps) consistently yield an Early Oligocene age of 31.5±0.7 Ma. This age has been obtained both for late-prograde, dehydration-related eclogitic veins, and for rocks variably deformed and recrystallized under eclogite facies conditions (2.0–2.5 GPa, 600°C). Initial Sr-isotopic equilibria among all phases indicate absence of significant post-eclogitic isotope redistribution processes, therefore the ages date eclogite facies assemblage crystallization. Equilibria also prove that no prolonged pre-eclogite facies history is recorded in the rocks. Instead, subduction, prograde mineral reactions, and eclogitization proceeded rapidly. Fast exhumation immediately after eclogitization, with minimum rates >36 mm/a is inferred from a 31.5±0.5 Ma internal mineral isochron age of a post-eclogitic greenschist facies vein assemblage. Such rates equal typical subduction rates. Late Eocene to Early Oligocene subduction of the European continental margin, with subsequent rapid exhumation of high-pressure nappe complexes has previously been recognized only in the Western Alps. The new data signify synchronous continental collision all along the Alpine belt. Our results demonstrate the unique potential of Rb/Sr assemblage system analysis for precise dating of both eclogite facies and post-eclogitic events, thus for precisely constraining exhumation rates of deep-seated rocks, and for straightforward linkage of petrologic evidence with isotopic ages.     

P -T-t history of the Lower Austroalpine Nappe Complex in the “Tarntaler Berge” NW of the Tauern Window: implications for the geotectonic evolution of the central Eastern Alps

New petrologic and ⁴⁰Ar/³⁹Ar geochronologic data constrain conditions of Alpine metamorphism along the northwestern border of the Tauern Window. The P-T estimations based on phengite barometry were determined for samples from units of the Lower Austroalpine nappe complex exposed above the Southpenninic interior of the Tauern Window, and from upper parts of the Southpenninic “Bündner Schiefer” sequence. Results suggest that both Mesozoic metasedimentary nappe units (Reckner and Hippold Nappes) and an ophiolitic nappe (Reckner Complex) of the Lower Austroalpine nappe complex have been metamorphosed at pressures between 8 and 10.5 kbar and temperatures around 350 °C. The structurally highest Lower Austroalpine unit (Quartzphyllite Nappe) was not affected by high-pressure metamorphism and records maximum P-T conditions of approximately 4 kbar and 400 °C. Highest parts of the structurally underlying Southpenninic Bündner Schiefer sequence were metamorphosed at intermediate pressures (6–7 kbar). Temperatures increased in all structural units during decompression. Whole-rock ⁴⁰Ar/³⁹Ar plateau ages of silicic phyllites and cherts with abundant high-Si phengites record ages around 50 Ma in the Reckner Nappe, and 44–37 Ma in the Hippold Nappe and Southpenninic Bündner Schiefer sequence. These ages are interpreted to date closely the high-pressure metamorphism. The Lower Austroalpine-Southpenninic border area in the NW Tauern Window appears to have evolved along an indented, fragmented active continental margin where the Reckner Complex represents one of the oldest sections of the Southpenninic (Piemontais) Oceanic tract that was originally situated close to, or even within, the Lower Austroalpine continent. During closure of the Piemontais Ocean, the resultant subduction zone did not entrain components of the Reckner Complex or its cover sequences (Reckner and Hippold Nappes): therefore “Eoalpine” high-pressure metamorphism did not occur. Sequences exposed within the study area were subducted to relatively shallow depths during the last stage of consumption of oceanic crust and immediately prior to final continental collision. Received: 30 July 1996 / Accepted: 7 April 1997     

Formation, subduction, and exhumation of Penninic oceanic crust in the Eastern Alps: time constraints from Ar/Ar geochronology

New ⁴⁰Ar/³⁹Ar geochronology places time constraints on several stages of the evolution of the Penninic realm in the Eastern Alps. A 186±2 Ma age for seafloor hydrothermal metamorphic biotite from the Reckner Ophiolite Complex of the Pennine–Austroalpine transition suggests that Penninic ocean spreading occurred in the Eastern Alps as early as the Toarcian (late Early Jurassic). A 57±3 Ma amphibole from the Penninic subduction–accretion Rechnitz Complex dates high-pressure metamorphism and records a snapshot in the evolution of the Penninic accretionary wedge. High-pressure amphibole, phengite, and phengite+paragonite mixtures from the Penninic Eclogite Zone of the Tauern Window document exhumation through ≤15 kbar and >500 °C at 42 Ma to 10 kbar and 400 °C at 39 Ma. The Tauern Eclogite Zone pressure–temperature path shows isothermal decompression at mantle depths and rapid cooling in the crust, suggesting rapid exhumation. Assuming exhumation rates slower or equal to high-pressure–ultrahigh-pressure terrains in the Western Alps, Tauern Eclogite Zone peak pressures were reached not long before our high-pressure amphibole age, probably at ≤45 Ma, in accordance with dates from the Western Alps. A late-stage thermal overprint, common to the entire Penninic thrust system, occurred within the Tauern Eclogite Zone rocks at 35 Ma. The high-pressure peak and switch from burial to exhumation of the Tauern Eclogite Zone is likely to date slab breakoff in the Alpine orogen. This is in contrast to the long-lasting and foreland-propagating Franciscan-style subduction–accretion processes that are recorded in the Rechnitz Complex.     

Crustal-scale extension in a convergent orogen : the Sterzing-Steinach mylomte zone in the Eastern Alps

Abstract

The western margin of the Tauera Window (Eastern Alps) is defined by a low angle westward dipping fault zone of potently We disp lacement. Ductile deformation of the fault rocks results in a carpet of mylonites up to 400 metres thick. Evidence from shear criteria and the excision of part of the Cretaceous-Tertiary metamorphic edifice both indicate normal displacements, and relative movement of Austroalpine nappe complex towards the west. The Sterzing-Steinach mylonite zone overprints the Alpine nappe edifice. Movements occurred on the cooling path of the Tauern metamorphism, and may be as recent as Middle Miocene.

The Kinematics and geometry of the mylonite zone constrain two likely t ectonic explanations that are both compatible with secondary thining of a thick orogenic wedge. (1) Ute the Austroalpine nappe pile due to tectonic unroofing of the Tauern window. (2) Continental escape by east-west stretching of the Alpine orogenic wedge in response to continental collision.     

Tertiary age and paleostructural inferences of the eclogitic imprint in the Austroalpine outliers and Zermatt–Saas ophiolite, western Alps

The Austroalpine Sesia-Lanzo inlier and upper Austroalpine Dent Blanche, Mt. Mary and Pillonet outliers occur on top of the western-Alpine orogenic wedge and, as a whole, override the structurally composite ophiolitic Piemonte zone. Instead, the Mt. Emilius, Glacier-Rafray, Etirol-Levaz and other lower Austroalpine eclogitic outliers are inserted within the Piemonte zone, between its upper (Combin) and lower (Zermatt-Saas) tectonic elements, or within the latter. Rb-Sr dating on phengitic micas show that the eclogitic imprint in the lower Austroalpine outliers, conventionally regarded as Late Cretaceous by comparison with the Sesia-Lanzo inlier, is of Eocene age (49-40 Ma), like the underlying Zermatt-Saas ophiolite (45-42 Ma) between the Aosta valley and Gran Paradiso massif. ⁴⁰Ar-³⁹Ar plateau ages on the same mica concentrates of the ophiolitic Zermatt-Saas nappe (46-43 Ma) are consistent with Rb-Sr dating, whereas that on the Austroalpine Glacier-Rafray klippe (92 Ma) is influenced by argon excess. The lower Austroalpine outliers underwent the subduction metamorphism concurrently with the Zermatt-Saas nappe, 20-25 Ma later than the eclogitic Sesia-Lanzo inlier and blueschist Pillonet klippe. The temporal gap and present intra-ophiolitic position mean that the lower Austroalpine outliers were probably derived from an intraoceanic extensional allochthon (Mt. Emilius domain) stranded inside the Piemonte-Ligurian ocean far from the Dent Blanche-Sesia domain and Adriatic margin.     

P-T data of Ky-St-Grt gneisses hosting HP amphibolites and eclogites from the Austroalpine Polinik complex, Kreuzeck Mountains, Eastern Alps, Austria

This study focuses on metapelites of the Polinik complex in the Kreuzeck Mts. southeast of the Tauern Window, Eastern Alps, where kyanite — staurolite — garnet gneisses host eclogites and high pressure (HP) amphibolites of the Austroalpine basement. The stable mineral assemblage is garnet — staurolite — biotite — kyanite — quartz. Estimated metamorphic conditions from conventional geothermobarometry are 654±30 °C and 0.9±0.08 GPa, and Average P-T values calculated by THERMOCALC, are 665±15 °C at 0.77±0.09 GPa. Formation of the present mineral association in gneisses is related to the exhumation (D2) stage of hosted eclogites/HP amphibolites within a lateral strike-slip zone.     

Cretaceous transformation from passive to active continental margin in the Western Carpathians as indicated by the sedimentary record in the Infratatric unit

The Cretaceous orogen of the Western Carpathians comprises fragments of the destructed northern Centrocarpathian domain, which is defined as Infratatric unit and formed a continental margin facing the Penninic Ocean in Jurassic and Cretaceous times. The breakup event and opening of the Penninic Ocean occurred in the Early Jurassic (Pliensbachian), which is recorded by an abrupt deepening event from shallow-water sediments to deep-water nodular limestone in the Infratatric sediment succession. The transformation of the passive into an active continental margin by the onset of subduction of the Penninic oceanic crust occurred in Santonian times and is reflected by the beginning of flysch deposition in the Infratatric Belice domain, which took the position of a forearc basin in the convergent margin setting. The forearc basin was supplied by clastic material from the more internal part of the Infratatric unit, which experienced nappe stacking, metamorphism, and subsequent exhumation in Late Cretaceous times. In the frontal part of the forearc basin an accretionary wedge was built up, which formed an outer-arc ridge and delivered detrital material into the forearc basin in Maastrichtian time. Final collision between the European and the Adriatic plate occurred in the Eocene period and is responsible for weak metamorphism in the Infratatric unit.     

The Alpine geodynamic evolution of Penninic nappes in the eastern Central Alps

The eastern Central Alps consist of several Pennine nappes with different tectonometamorphic histories. The tectonically uppermost units (oceanic Avers Bündnerschiefer, continental Suretta and Tambo nappes, oceanic Vals Bündnerschiefer) show Cretaceous/early Tertiary W-directed thrusting with associated blueschist facies metamorphism related to subduction of the Pennine units beneath the Austroalpine continental crust. This event caused eclogite facies metamorphism in the underlying continental Adula nappe. The gross effect was crustal thickening. The tectonically lower, continental Simano nappe is devoid of any imprint from this event. In the course of continent-continent collision, high- T metamorphism and N-directed movements occurred. Both affected the whole nappe pile more or less continuously from amphibolite to greenschist facies conditions. Crustal thinning commenced during the regional temperature peak. A final phase is related to differential uplift under retrograde P–T conditions. Further thinning of the crust was accommodated by E- to NE-directed extensional deformation.     

Fault slip analysis in the Koralm Massif (Eastern Alps) and consequences for the final uplift of “cold spots” in Miocene times

The Paleogene and Neogene evolution of Austroalpine basement units east of the Tauern Window is characterised by the formation of two major sets of faults: (1) ESE–WNW- to E–W-trending faults, associated with ENE- and NNW-trending conjugate structures and (2) N–S to NNE-SSW striking structures, mainly acting as high-angle normal faults, often associated with E-dipping low-angle normal faults along the western margin of the Styrian Basin.Together with the stratigraphic evolution of the Styrian and Lavanttal Basins and the related subsidence histories a tectonic evolution may be reconstructed for this part of the Eastern Alps. In the southern part of the Koralm Massif, WNW-trending fractures were activated as dextral strike-slip faults, associated with the evolution of WNW-trending troughs filled up with coarse block debris. W- to WNW-trending fractures were reactivated as normal faults, indicating N–S extension. It is assumed that these phases resulted in subsidence and block debris sedimentation in Karpatian and Badenian times (ca. 17–13 Ma).In the Western Styrian Basin no Sarmatian (13–11.5 Ma) sediments are observed; Pannonian (11.5 to 7.1 Ma) sediments are restricted to the Eastern Styrian Basin. This indicates, that the Koralm basement and the Western Styrian Basin were affected by post-Sarmatian uplift, coinciding with a re-activation of N-trending normal faults along the eastern margin of the Koralm Massif. Therefore, we suggest that the final uplift of the Koralm Complex, partly together with the Western Styrian Basin, occurred during the early Pannonian (at approximately 10 Ma). The elevation of clastic deposits indicates that the Koralm Complex was elevated by approximately 800 m during this phase, associated with an additional phase of E–W-directed extension accommodated by N–S striking normal faults.     

全球典型大陆造山带中榴辉岩的折返机制:来自变质岩和地球物理的限制

大陆岩石圈深俯冲作用是地球科学领域的前沿热点,榴辉岩的折返机制是板块构造及动力学的关键科学问题。全球著名的大陆造山带中榴辉岩的p-T轨迹呈现差异性折返特征,为了揭示榴辉岩的折返机制,本文结合变质岩石学和地球物理学研究,选取3个典型大陆造山带——中生代—新生代的阿尔卑斯造山带、中生代的苏鲁—大别造山带和新生代的喜马拉雅造山带中的榴辉岩进行阐述。在阿尔卑斯造山带地区,地球物理研究结果发现,欧洲板块的俯冲造成了Adria地区下方的岩石圈存在明显厚度差异。同时,阿尔卑斯造山带Doria Maria和Pohorje地区以及Pohorje地区内部,榴辉岩折返历史也不尽相同,原因可能是亚德里亚大洋岩石圈断离后不同期次的逆冲推覆作用使其差异性斜向挤出。苏鲁—大别造山带中榴辉岩的快速折返,原因可能是华南板块与华北板块碰撞后岩石圈的拆沉或断离作用。在喜马拉雅造山带,西构造结和中喜马拉雅榴辉岩的折返存在差异性。在西构造结,那让和卡甘榴辉岩呈现不同的p-T轨迹和折返速率,变质岩石学和地球物理研究结果都表明它们的差异性折返很可能与印度-欧亚大陆碰撞过程中的构造挤压作用以及印度大陆岩石圈的断离作用有关。喜马拉雅造山带是年轻的正在进行造山活动的造山带,相较于古老的苏鲁-大别造山带,它更适合变质岩石学和地球物理学的综合研究。因此西构造结高压/超高压榴辉岩的折返机制——构造挤压和俯冲板块断离可应用于全球造山带。     

Two subduction events in a polycyclic basement: Alpine and pre-Alpine high-pressure metamorphism in the Suretta nappe, Swiss Eastern Alps

This study is essentially based on coupling macrostructures, microstructures and metamorphic petrology in polymetamorphic mafic rocks from the Swiss Eastern Alps (Suretta nappe, Penninic domain). Petrographic criteria are used in conjunction with structural analysis and microprobe work to define crystallization/deformation relationships and to establish a relative but precise sequence of tectono-metamorphic events. A first eclogite facies overprint and related exhumation occurred before emplacement of late Palaeozoic intrusives. During the Alpine cycle, the Suretta nappe was part of the thinned European continental margin. The Tertiary burial due to subduction and collision is responsible for D1 ductile thrusting and blueschist facies metamorphism. Late deformation phases, related to exhumation, are responsible for the development of extensional structures under greenschist facies conditions. Quantitative metamorphic petrology based on Gibbs free energy minimization (DOMINO by de Capitani) gives a constraint on the P–T  conditions during the polymetamorphic and polycyclic evolution. The first high- P metamorphic event related to pre-Alpine structures occurred at c . 700  °C and at least 2.0  GPa. These conditions are compatible with pre-Alpine high- P re-equilibration already described in several Alpine units. The Alpine high- P metamorphism occurred under blueschist facies conditions at c . 400–450  °C and 1.0  GPa. Similar high- P , low- T  conditions have already been described in the Mesozoic and Permian rock types. The two high- P events are clearly related to two different geothermal regimes and geodynamic environments.     

Deformation inside a paleosubduction channel – Insights from microstructures and crystallographic preferred orientations of eclogites and metasediments from the Tauern Window,Austria

The Eclogite Zone, of the Tauern Window is an exhumed subduction channel comprising eclogites with different grades of retrogression in a matrix of high-pressure metasediments. The rocks were exposed to 600 °C and 20–25 kbars, and then retrogressed during their exhumation, first under blueschist facies and later under amphibolite facies metamorphism. To gain insights into the deformation within the subduction channel during subduction and exhumation, both fresh and retrogressed eclogites, as well as the surrounding metasediments were investigated with respect to their deformation microstructures and crystallographic preferred orientations (CPOs). Pristine and retrogressed eclogites show grain boundary migration and subgrain rotation recrystallization microstructures in omphacite. A misorientation axes analysis reveals the activity of complementary deformation mechanisms including grain boundary sliding and dislocation creep. The omphacite CPOs of the eclogites correspond to dominant SL-fabrics characteristic of plane strain deformation, though there are local variations towards flattening or constriction within the paleosubduction channel. The glaucophane CPOs in retrogressed eclogites match those of omphacite, suggesting that a constant strain geometry persisted during exhumation at blueschist facies conditions. Plastic deformation of the host high-pressure metasediments outlasted that of the eclogites, as indicated by white mica fabrics and quartz CPO. The latter is consistently asymmetric, pointing to the operation of non-coaxial deformation. The microstructures and CPO data indicate a continuous plastic deformation cycle with eclogite and blueschist facies metamorphism related to subduction and exhumation of the different rock units.     

Integration of natural data within a numerical model of ablative subduction: a possible interpretation for the Alpine dynamics of the Austroalpine crust

A numerical modelling approach is used to validate the physical and geological reliability of the ablative subduction mechanism during Alpine convergence in order to interpret the tectonic and metamorphic evolution of an inner portion of the Alpine belt: the Austroalpine Domain. The model predictions and the natural data for the Austroalpine of the Western Alps agree very well in terms of P–T peak conditions, relative chronology of peak and exhumation events, P–T–t paths, thermal gradients and the tectonic evolution of the continental rocks. These findings suggest that a pre‐collisional evolution of this domain, with the burial of the continental rocks (induced by ablative subduction of the overriding Adria plate) and their exhumation (driven by an upwelling flow generated in a hydrated mantle wedge) could be a valid mechanism that reproduces the actual tectono‐metamorphic configuration of this part of the Alps. There is less agreement between the model predictions and the natural data for the Austroalpine of the Central‐Eastern Alps. Based on the natural data available in the literature, a critical discussion of the other proposed mechanisms is presented, and additional geological factors that should be considered within the numerical model are suggested to improve the fitting to the numerical results; these factors include variations in the continental and/or oceanic thickness, variation of the subduction rate and/or slab dip, the initial thermal state of the passive margin, the occurrence of continental collision and an oblique convergence.