Discovery of a layer of probable impact melt spherules in the Late Archaean Jeerinah Formation,Fortescue Group,Western Australia

In the high‐grade (granulite facies) metamorphic rocks at Broken Hill the foliation is deformed by two groups of folds. Group 1 folds have an axial‐plane schistosity and a sillimanite lineation parallel to their fold axes; the foliation has been transposed into the plane of the schistosity by these folds. Group 2 folds deform the schistosity and distort the sillimanite lineation so that it now lies in a plane. Both groups of folds are developed as large folds. The retrograde schist zones are zones in which new fold structures have formed. These structures deform Group 1 and Group 2 folds and are associated with the formation of a new schistosity and strain‐slip cleavage. The interface between ore and gneiss is folded about Group 1 axial planes but about axes different from those in the foliation in the gneiss. On the basis of this, the orebody could not have been parallel to the foliation prior to the first recognizable structural and metamorphic events at Broken Hill. The orebody has been deformed by Group 2 and later structures.     

Microstructural evidence of time-relationships between metamorphism and deformation in the metasedimentary sequence of the Northern Hill end trough, New South Wales, Australia

Microstructural evidence of time-relationships between regional metamorphism and deformation has been obtained in the higher-grade, biotite-bearing parts of the metasedimentary sequence of the northern Hill End Tough, New South Wales. The rocks have only one prominent foliation (slaty cleavage) and one mineral-streaking lineation, which are of consistent orientation through the area. Therefore, they should be suitable for obtaining clear evidence of time-relationships. Microstructural criteria in many of the rocks are ambiguous, but relatively clear evidence is shown by porphyroblastic biotite phyllites (locally containing garnet), in which some of the porphyroblasts show microboudinage, new biotite occurring with quartz in the interboudin areas. These rocks indicate that biotite was stable during the later stages of deformation. The study shows that careful microstructural studies can be diagnostic of time-relationships in low-grade metamorphic areas, where critical rocks are available.     

Regional slaty cleavage formation and fold axis rotation by re-use and reactivation of pre-existing foliations: the Fiery Creek Slate Belt, North Queensland

A deformation history, comprised of six separate deformation events of differing intensity, has affected the rocks of the South Palmer River region of the the Hodgkinson Province, north Queensland. Within this region, a zone of pervasive slaty cleavage, herein termed the Fiery Creek Slate Belt, has developed as a result of the superposition of fabrics formed during several of these events. The most important processes in the formation of this composite cleavage were the re-use and reactivation of the favourably oriented, steep, N-S-trending S₂ foliation by the intense fourth deformation event, D₄. This produced micro-, meso- and macroscopic folds in an originally shallow S₃ foliation, produced during the intervening D₃ deformation, with an axial planar S₂–S₄ foliation. The D₄ stretching lineation, L⁴₄, plunges subvertically to steeply north and indicates that shear during D₄ was oriented steeply north-south. In the Fiery Creek Slate Belt, D₂ fold axes are interpreted to have formed in much shallower orientations than their present moderately N-S-plunging to subvertical orientations. We consider this to be a result of D₄ shear, which caused variable degrees of rotation of D₂ fold axes toward the D₄ stretching lineation due to subparallelism of the bulk shortening directions of the D₂ and D₄ events. Near-total destruction of the pre-D₄ foliations during slaty cleavage formation has produced a misleading impression of a simple deformation history. There is no relationship between metamorphic grade and intensity of slaty cleavage development.     

武功山北缘剥离断层、近水平韧性剪切带与伸展构造

武功山北缘的伸展构造结构完整,系由以脆性变形的上拆离盘及近水平的韧性剪切带为代表的变质核杂岩体所组成。上拆离盘组成于一系列的北倾犁式正断层系及拉张断陷盆地;变质核杂岩体的岩石以舌状—饼状褶皱、片理化、拉伸线理及条带状糜棱岩等近水平的韧性剪切变形为其特征。根据由伸展构造所控制的拉伸断陷盆地的沉积物时代来推测,武功山北缘的伸展构造可能发生于印支运动晚期。     

Transition from subduction- to exhumation-related fabrics in glaucophane-bearing eclogites, Oman: evidence from relative fabric chronology and Ar/Ar ages

Controversy over the age of peak metamorphism and therefore the tectonic evolution of the Arabian margin relates to the polydeformed and polymetamorphosed nature of glaucophane-bearing eclogites from the Saih Hatat window beneath the allochthonous Samail ophiolite in NE Oman. These eclogites contain relicts of earlier fabrics, structures and metamorphic assemblages and provide a record of change from subduction to exhumation. The eclogites are part of a mafic layer that was disrupted into boudins up to 0.5 km in length within a lower plate shear zone (As Sifah shear zone). The megaboudins not only preserve the relicts of the highest grade of metamorphism but also an early ENE-trending lineation and sheathlike isoclines enveloped by the flat-lying schistosity. The boudin-bearing layer is isoclinally folded with calc-schist, mafic schist and quartz–mica schist, where the regional folds have axes parallel to the NE-trending stretching lineation (a-type folds). Textural evidence suggests multiple growth events for garnet and clinopyroxene, requiring polymetamorphism of the mafic layers that formed the eclogite megaboudins. The surrounding calc-schist and quartz–mica schist are both intensely deformed with transposition foliation containing an NE-trending lineation in phengite and asymmetric shear indicators such as C′-type shear bands and asymmetric pressure shadows around garnets, that give top-to-the-NE sense of shear. Although consistent ENE-trending lineations in all the boudins suggest that they have largely acted as passive, nonrotating rigid bodies, the presence of NE-vergent asymmetric mesofolds, extensive dynamic recrystallisation, multiple generations of phengites and a range of ⁴⁰Ar–³⁹Ar apparent ages within the megaboudins suggest, however, that they have not acted entirely passively during the later deformation. Phengites isolated from the high-P/low-T fabrics show groupings in ⁴⁰Ar–³⁹Ar apparent ages interpreted as distinct metamorphic/cooling intervals at 140–135, 120–98 and 92–80 Ma. Microstructural relations suggest that age groupings younger than 100 Ma reflect phengite growth during exhumation with the top-to-the-NE shearing. The older ages (120–110 Ma) from fabrics that give top-to-the-S shear sense may reflect growth during the subduction phase. The combination of groupings of apparent argon ages older than the crystallisation age of the Samail Ophiolite, the suggestion of different geothermal gradients, and superposed metamorphism suggest that the eclogites and garnet blueschists formed as a result of underthrusting along a break that was not directly related to the metamorphic sole of the ophiolite. The glaucophane–eclogites are interpreted as having formed at different times under varying pressure–temperature conditions during underthrusting with variations in the rate of underthrusting, allowing thermal equilibration and/or rapid cooling at different crustal levels.     

Polyphase Deformation of the Weihai-Rongcheng UHP Unit Rocks, NE Sulu： Insights into the Tectonic Evolution of the Dabie-Sulu UHP and HP Belts, China

Different scales of structural data reveal a complex deformation history of ultrahigh- pressure （UHP） rocks exposed in the Weihai-Rongcbeng area, NE Sulu （northern Jiangsu-eastern Shandong）, eastern China. Excluding pre-UHP deformations, at least five major sequential deformational stages （D1-Ds） are recognized. The first deformation （DO produced a weak foliation and lineation in massive eclogites. The foliated eclogite with a dominant foliation containing a stretching and mineral lineation was developed during the I）2 deformation. Both the D1 and D2 deformations occurred under UHP metamorphic conditions, and are well preserved in the eclogite bodies. D3 structures which developed shortly after the formation of granulite/amphibolite facies symplectites are characterized by imbricated associations marked by a regional, steeply dipping foliation, compositional layering, eclogite boudinage, isoclinal folds and reverse ductile shear zones. The D3 deformation was accompanied by decompressional partial melting. A regional, gently dipping amphibolite facies foliation and stretching lineation, low-angle detachments, and dome- and arc-shaped structures formed during the D4 deformation stage dominate to some degree the map pattern of the Weihai-Rongcbeng UHP domain. The last stage of deformation （Ds） gave rise to the final exhumation of the UHP rocks. Ds is characterized by development of brittle-dominated high-angle faulting associated with emplacement of large volmnes of undeformed granite plutons and dykes dated at 134-100 Ma. The deformational and metamorphic sequence followed by the UHP rocks in the Weihai-Rongcheng area is similar to that studied in the entire Dabie-Sulu UHP and HP metamorphic belts from microscopic to mapping scale. Based on structural data, combined with available petrographic, metamorphic and geochronological data, a speculative tectonic evolutionary model for the Dabie-Sulu UHP and IIP belts is proposed, involving continental subduction/collision between the Sino-Korean and Yangtze cratons and subsequent polyphase exhumation histories of the UHP and IIP metamorphic rocks.     

内蒙古大青山高级变质岩中熔体线理特征

熔体线理由浅色部分熔融物质形成长的集合体或杆状体沿着应变椭球体X轴方向定向排列构成,是高级变质岩特有的一种线状构造.熔体线理发育在深部构造层次韧性变形带中,与矿物拉伸线理一样具有运动方向指向意义.熔体线理形成于伸展构造环境中,是变形作用、变质作用和部分熔融作用共同作用的结果.伸展构造变形导致岩石部分熔融,是熔体线理形成...     

医巫闾山变质核杂岩构造特征

经过野外宏观观测、室内显微分析及同位素年龄测定,基本厘定医巫闾山是一个白垩纪时形成的变质核杂岩。变质核杂岩中心为晚燕山期的医巫闾山二长花岗岩体,周围是由代表地壳深部变形特点的太古宇变质岩组成的变质核。变质核北面和东面以拆离断层与盖层下部中新元古界相接触,并为中新元古界组成的韧性流变的中间层所环绕。变质核西面以阜新盆地东南缘边界正断层( 孙家湾- 稍户营子正断层) 与盖层上部以脆性变形为特征的白垩纪碎屑岩相邻。变质核杂岩的变形片理、线理及运动指向说明该变质核杂岩为对称型变质核杂岩。     

Deformation history inferred from magnetic fabric in the southwestern Okcheon metamorphic belt, Korea

Magnetic fabric and rock-magnetic studies have been carried out for the non-fossiliferous, low- to medium-grade metasedimentary rocks in the southwestern part of the Okcheon metamorphic belt (OMB). Two major metamorphic events in the study area were previously recognized: regional metamorphism (M₁) in the late Carboniferous to early Permian and contact metamorphism (M₂) due to the intrusion of granite in the middle Jurassic. The metamorphic grade of the study area increases from the biotite zone in southeast through the garnet zone to the staurolite zone towards the northwest. Magnetic fabrics of the study area are generally well defined and can be characterized according to the metamorphic zones. Magnetic foliation is the dominant magnetic fabric in the biotite zone, while magnetic lineation prevails in both garnet and staurolite zones. We interpret the metamorphism-related deformation history of the study area based on magnetic fabrics, magnetic mineralogy and previously reported metamorphic evolution as follows. Penetrative NW-dipping cleavage, represented by magnetic foliation, was formed in the study area by prevailing NW–SE shortening event during the M₁ regional metamorphism in the late Carboniferous–early Permian. This shortening event is interpreted to be associated with the collisional event between the North and South China blocks. Cleavages dipping steeply to the southeast in the staurolite zone are attributed to the pressure exerted from the intrusion of Jurassic granite in the northwestern area.     

Geological aspects of deformation in continental shear zones

A method of kinematic analysis of structures, microstructuresand mineral preferred orientations, initially devised in the study of peridotites, has been applied to crustal rocks bearing evidence of large strains produced in metamorphic environments. Three tectonic lineaments (Angers-Lanvaux, Montagne Noire and Maydan) were selected. They illustrate a general situation arising in continental crusts when they are deformed by ductile transcurrent fault systems.The Angers-Lanvaux structure is bilaterally symmetric; its dominant feature is the horizontal stretching lineation which is parallel to the fold axes. The foliation and slaty cleavage in the most surficial formations wrap around the axis of the whole structure. The folds in the slates away from the axis also exhibit axes parallel to the general trend, but no stretching lineations. These folds are attributed to crustal shortening in a direction normal to the ductile fault. In the Montagne Noire recumbent folds are thrusted away from the axis of the structure over at least 25 km. The metamorphism is also centered on the structure and symmetrically reduced away from it. The core of the structure is occupied by a strongly lineated orthogneiss, cut by a late intrusive granite. The Maydan axial zone displays clear evidence of partial melting at various scales within the deformed gneisses: (1) in gashes perpendicular to the stretching lineation which in these anatectic formations tends to plunge at more than 45°; (2) in bands of deformed pegmatites; and (3) possibly in granites which on the one hand intrude the surrounding formations and on the other converge with increasing deformation on the fault zone. The quartz preferred orientations and microstructures in quartzite layers from Angers indicate that the plastic flow plane and direction lie, respectively, close to the foliation and lineation, the slight departure is ascribed to a flow with a rotational shear component.All this suggests a general model for the origin of such ductile zones. The horizontal relative displacement of crustal blocks along a ductile band is responsible for its overall steeply dipping foliation and horizontal lineations. Viscous heating progressively tends to concentrate the plastic flow along its axis. It is also responsible for the development of metamorphism and of anatexis at depth; the partially melted rocks tend to rise, building at shallower depth the arched structure in the axis of the ductile zone, with a continuing flowage parallel to this axis probably now in the solid state; they can also intrude the surrounding terrain as undeformed batholiths. The folds parallel to the stretching lineation in the axial zone are explained by the fact that, due to the escape of anatectic melts, the formations at depth flow in a narrowing channel. The upwelling of the axial structure induces a compression with folding in the surrounding sedimentary formations and gravity nappe sliding away from the axis.     

Structural pattern in the Precambrian rocks of Sonua-Lotapahar region,North Singhbhum,eastern India

In the western part of the North Singhbhum fold belt near Lotapahar and Sonua the remobilized basement block of Chakradharpur Gneiss is overlain by a metasedimentary assemblage consisting of quartz arenite, conglomerate, slate-phyllite, greywacke with volcanogenic material, volcaniclastic rocks and chert. The rock assemblage suggests an association of volcanism, turbidite deposition and debris flow in the basin. The grade of metamorphism is very low, the common metamorphic minerals being muscovite, chlorite, biotite and stilpnomelane. Three phases of deformation have affected the rocks. The principal D1 structure is a penetrative planar fabric, parallel to or at low angle to bedding. No D1 major fold is observed and the regional importance of this deformation is uncertain. The D2 deformation has given rise to a number of northerly plunging major folds on E-W axial planes. These have nearly reclined geometry and theL ₂lineation is mostly downdip on theS ₂surface, though some variation in pitch is observed. The morphology of D2 planar fabric varies from slaty cleavage/schistosity to crenulation cleavage and solution cleavage. D3 deformation is weak and has given rise to puckers and broad warps on schistosity and bedding. The D2 major folds south of Lotapahar are second order folds in the core of the Ongarbira syncline whose easterly closure is exposed east of the mapped area. Photogeological study suggests that the easterly and westerly closing folds together form a large synclinal sheath fold. There is a continuity of structures from north to south and no mylonite belt is present, though there is attenuation and disruption along the fold limbs. Therefore, the Singhbhum shear zone cannot be extended westwards in the present area. There is no evidence that in this area a discontinuity surface separates two orogenic belts of Archaean and Proterozoic age.     

Distinguishing syn-cleavage folds from pre-cleavage folds to which cleavage is virtually axial planar: examples from the Cambrian core of the Lower Palaeozoic Anglo-Brabant Deformation Belt (Belgium)

Within the Cambrian Jodoigne Formation in the easternmost part of the Anglo-Brabant Deformation Belt, sub-horizontal to gently plunging folds occur within the limbs of steeply plunging folds. The latter folds are cogenetic with cleavage and are attributed to the Brabantian deformation event. In contrast, although cleavage is also (1) virtually axial planar to the sub-horizontal to gently plunging higher-order folds, shows (2) a well-developed divergent fanning across these folds, (3) an opposing sense of cleavage refraction on opposite fold limbs, and (4) only very small cleavage transection angles, an analysis of the cleavage/bedding intersection lineation suggests that these higher-order folds have a pre-cleavage origin. On the basis of a comparison of structural and sedimentological features these higher-order folds are interpreted as slump folds. The seemingly ‘normal’ cleavage/fold relationship across the slump folds within the limbs of the large steeply plunging folds is due to the very small angle between cleavage and bedding.As such, a ‘normal’ cleavage/fold relationship is no guarantee for a syn-cleavage fold origin. It is not unlikely that also within undeformed, recumbent slump folds, a well-developed compaction fabric, formed parallel to the axial surface of the slump folds, may show fanning and contrasting senses of cleavage refraction on opposite fold limbs.     

Structural arcuation in the Berwyn Hills,North Wales

New mapping has better defined the well known arc in Acadian (late Caledonian) structures centred in the Berwyn Hills. This arc, convex to the north-west and about 20 km across, is defined by the strikes of bedding and cleavage and the trends of fold hinges. In contrast, a mineral lineation within the cleavage has a north-north-westerly plunge throughout the arc. It approximates to the long (X) axes of measured strain ellipsoids. A primary origin for the arcuation is implied by this consistency, by the absence of secondary cleavages and by opposing senses of fold transection across the arc. The new data favour the hypothesis of shortening of the Lower Palaeozoic cover against and over a pre-existing basement high inferred from geophysical data and from metamorphic and sedimentary facies.     

庐山变质核杂岩基底拆离的变形特征及形成条件

庐山变质核杂岩具有典型的3层结构。拆离带是核部隆升过程中盖层滑脱、剪切变形而形成的,该拆离面是在北东向褶皱基础上叠加杂岩核部隆升作用而形成的波状起伏面。拆离带在核部以西发育倾向西向、南西向、北西向的面理和矿物生长线理,显示向西滑脱形成剪切拉伸变形的特征。拆离带岩石以糜棱岩和构造片岩为主,辅以碎裂岩和构造角砾岩。岩石变形特征表明其既具有韧性变形,也具有脆-韧性变形及脆性变形的特点。核部隆升引起的拆离变形作用,不仅形成了拆离带,还影响了拆离带以上盖层岩石,形成一个由拆离带向上由强变弱的变形域。这种规律性递变现象使庐山变质核杂岩具有垂向变形分层、水平变形分带的特点。拆离带中角闪石-斜长石矿物对计算得出的变质温度为653 ℃～694 ℃,压力为0.56～0.67 GPa。     

藏东巴青县北部酉西岩组构造片理形成及构造意义

西藏巴青县以北酉西岩组主要由石英构造片岩、钠长石英构造片岩、白云母石英构造片岩组成,构造片理为近水平韧性剪切作用产物。宏观上构造片理构成了宽缓的背形、向形褶皱构造,构造片理上广布一期透入性拉伸线理,将构造片理展平,分布在透入性片理上的线理具明显优选方位,方向为280~100°。根据微观构造分析,韧性剪切指向为自西向东运动,构造片岩内发育多硅白云母。多硅白云母电子探针分析结果认为其形成环境为低温高压蓝片岩相,变质温度确定为320~500℃、压力0·6~1·1GPa。多硅白云母40Ar/39Ar测年结果为(230±1)Ma,为中三叠世末期。酉西岩组构造片理(韧性剪切作用)与查吾拉—吉塘印支期构造岩浆带形成密切相关。     

A microstructural and microchemical study of cleavage lamellae in a slate

The results of a detailed microstructural and microchemical study of a slate from the Chewton area, Victoria, Australia are reported in which it was found that cleavage developed from microcrenulations. Phyllosilicates in P-domains differed in their chemistry from those in Q-domains and were concentrated in the P-domains by localized metamorphic reactions which were aided by mechanical rotation and solution processes. Wide, dark cleavage lamellae, often taken as evidence for the passive concentration of insoluble minerals, appear to have had a similar origin. The P-domains exhibited two types of microstructure, one which was consistent with annealing and the other with deformation within the domain. Cataclasites had formed along some P-domains, suggesting that they had become preferential sites for late phase brittle deformation.     

江苏东海CCSD主孔超高压变形与折返变形的叠加关系

位于苏鲁超高压变质地体南部的中国大陆科学钻探工程（CCSD）主孔岩石经历了超高压变形及多期折返变形。第一期折返变形为伸展折返变形,榴辉岩发生角闪岩相退变质作用,没有新生面理或线理的发育,基本保留了超高压阶段的S-L组构,并有显示熔融体特征的强退变榴辉岩发育。第二期折返变形为SEE-NWW向挤压折返变形,超高压变形期形成的不同岩石类型在本期变形中表现出不同的叠加变形现象,榴辉岩类岩石早期形成的S倾面理主体部分转为SEE倾,但拉伸线理产状与超高压变形期的近SN走向基本一致,反映早期面理沿NNE轴向的重褶作用,局部又被向SEE缓倾的韧性剪切带切割;而片麻岩类岩石在超高压变形期形成的S-L组构的主体部分已被新生成的总体向SEE缓倾的S-L组构置换,反映早期面理不仅重褶,而且大部分再度发生韧性剪切变形,具SEE向NWW的逆冲剪切指向,矿物普遍重新定向。第三期折返变形发育具NWW向SEE正滑剪切指向的韧性剪切带,并伴随大量“Z”型褶皱构造的发育。第四期折返变形以NWW向SEE正滑的张性或张扭性脆性断裂活动为主。探讨了苏鲁超高压变质地体折返变形的力学机制及CCSD主孔岩石面理变化的形成机制。     

大别山碧溪岭地区超高压变质岩构造分析

大比例尺 (1∶10 0 0 0 )构造制图及构造分析表明 ,碧溪岭地区超高压变质岩石含有丰富的构造演化历史记录。同碰撞或挤压组构只保留于榴辉岩及其它超高压变质岩透镜体内部 ,表现为高角度网络状超高压剪切带与弱应变透镜体域规律组合格式。前者由面理或糜棱岩化榴辉岩组成 ,后者由块状榴辉岩及石榴橄榄岩组成。碰撞期后伸展构造表现为区域性的假单斜状 ,内部呈低缓角度的网络状强应变带及所环绕的透镜状弱应变域组合格式 ,强应变带的岩石为由榴辉岩退变成的角闪岩相高压片麻岩及部分熔融形成的含榴花岗岩 ,透镜状弱应变域的岩石为弱角闪相改造的榴辉岩及石榴橄榄岩。不同尺度上同碰撞或挤压组构及碰撞期后伸展组构所显示的这种残斑基质流变学结构样式 ,虽然与先期原岩成分、结构、流变学的不均一性有关 ,但主要是多期递进应变分解作用的结果 ,支持榴辉岩“原地”成因模式。依据构造学证据和可利用的岩石学及同位素年代学资料 ,分析了超高压变质岩石的形成及折返过程 ,指出碧溪岭地区超高压变质岩石是在 2 45～ 2 10Ma形成的 ,碰撞期后伸展作用主要发生在 2 0 0～ 170Ma。在超高压变质岩石向地壳表层折返过程中 ,张扭作用可能有重要功能 ,不支持碧溪岭地区遭受过多期超高压变质作用的推论。     

Kinematics of the Southern Rhodope Core Complex (North Greece)

The Southern Rhodope Core Complex is a wide metamorphic dome exhumed in the northern Aegean as a result of large-scale extension from mid-Eocene to mid-Miocene times. Its roughly triangular shape is bordered on the SW by the Jurassic and Cretaceous metamorphic units of the Serbo-Macedonian in the Chalkidiki peninsula and on the N by the eclogite bearing gneisses of the Sideroneron massif. The main foliation of metamorphic rocks is flat lying up to 100 km core complex width. Most rocks display a stretching lineation trending NE–SW. The Kerdylion detachment zone located at the SW controlled the exhumation of the core complex from middle Eocene to mid-Oligocene. From late Oligocene to mid-Miocene exhumation is located inside the dome and is accompanied by the emplacement of the synkinematic plutons of Vrondou and Symvolon. Since late Miocene times, extensional basin sediments are deposited on top of the exhumed metamorphic and plutonic rocks and controlled by steep normal faults and flat-ramp-type structures. Evidence from Thassos Island is used to illustrate the sequence of deformation from stacking by thrusting of the metamorphic pile to ductile extension and finally to development of extensional Plio-Pleistocene sedimentary basin. Paleomagnetic data indicate that the core complex exhumation is controlled by a 30° dextral rotation of the Chalkidiki block. Extensional displacements are restored using a pole of rotation deduced from the curvature of stretching lineation trends at core complex scale. It is argued that the Rhodope Core Complex has recorded at least 120 km of extension in the North Aegean, since the last 40 My.     

苏鲁-大别山超高压变质带迟家店和碧溪岭石榴二辉橄榄岩橄榄石组构

大别山碧溪岭和山东荣成分别发育壳源和幔源的石榴二辉橄榄岩。它们在扬子板块向华北板块的俯冲过程中与俯冲板片一起经历了超高压变质作用。这两种原岩来源不同的石榴橄榄岩中的橄榄石具有相似的结晶学优选方位(LPO):[100]轴主板密垂直于面理面,[010]轴主极密平行于线理,这种橄榄石结晶学优选方位明显不同于高温地幔橄榄岩包体中的橄榄石组构,也不同于最近在超高压变质地体中发现的水导致的橄榄石组构。我们认为碧溪岭和荣成石榴二辉橄榄岩中的这种橄榄石组构可能是在相对较干的超高压变质条件下形成的。本研究为大陆深俯冲超高压变质石榴橄榄岩橄榄石组构特征提供了第一手资料。