共查询到20条相似文献,搜索用时 515 毫秒
1.
J. Dold 《The Photogrammetric Record》1998,16(92):199-212
In the past few years the automation of digital industrial photogrammetric systems has increased dramatically. Due to digital image processing software, coded targets and automatic matching methods, a huge number of photogrammetric measurement tasks can be fully automated. In many cases a "one button click" is enough to provide the three dimensional co-ordinates of measured points without any manual interaction, immediately after acquiring the images. The technology of intelligent cameras is a logical step towards automated photogrammetric measurements. An intelligent camera, which has an integrated computer, analyses the image immediately after it is taken. This technology provides not only a much shorter processing time for the images but also more control over the measurement process just when it is needed, during image acquisition. This takes place in the form of real time feedback.
This paper describes the role of a digital intelligent camera in the automation of an industrial photogrammetric measurement system and gives an overview of existing automation techniques in industrial photogrammetry. As an example of an intelligent camera, the performance of the new INCA digital intelligent camera, developed and manufactured by Geodetic Services, Inc. (GSI) and distributed by Leica, is described. 相似文献
This paper describes the role of a digital intelligent camera in the automation of an industrial photogrammetric measurement system and gives an overview of existing automation techniques in industrial photogrammetry. As an example of an intelligent camera, the performance of the new INCA digital intelligent camera, developed and manufactured by Geodetic Services, Inc. (GSI) and distributed by Leica, is described. 相似文献
2.
W. Bösemann 《The Photogrammetric Record》1998,16(92):187-197
Digital photogrammetric systems have been introduced to solve various measurement problems in industrial applications for many years, ever since high resolution CCD cameras and powerful computer technologies have been available. For a successful implementation of a digital photogrammetric system into the production line, not only does the actual measurement task have to be solved but also a complete integration of the system into the production process usually has to be supplied by the system manufacturer. Three examples of successful implementations of photogrammetric systems for industrial automation and process control are presented in this paper. 相似文献
3.
C. S. Fraser 《The Photogrammetric Record》1998,16(91):37-50
This presentation offers some thoughts on the emergence (that is essentially to say the commercial acceptance and exploitation) of close range digital photogrammetric systems. The discussion is restricted to systems based on standard photogrammetric processes involving digital frame imagery. Systems are classified into three tiers which are distinguished not only by accuracy and cost, but also by the degree to which a technology transfer has taken place from the specialist photogrammetrist to the non-specialist user. This technology transfer, it will be argued, has facilitated dramatic growth in the application of low accuracy, low cost three dimensional modelling systems in areas such as heritage recording, multimedia, process plant documentation and forensic photogrammetry. Along with automation, this technology transfer has also largely accounted for the wider use of high accuracy, high cost, off line and real time vision metrology systems in large scale industrial metrology. Rapid growth in these two system categories is then contrasted against the more modest advances being witnessed in the traditional close range photogrammetric service sector. Prospects for the future are also touched upon. 相似文献
4.
The Department of Geomatics and the Regional Centre for Innovation in Engineering Design in the University of Newcastle upon Tyne collaborated in a project to produce precise measurements for use in the fabrication of the body of the "Angel of the North" sculpture. This 20 m high edifice, by the sculptor Antony Gormley, is located adjacent to the A1(M) in Gateshead, Tyne and Wear.
This paper reviews the photogrammetric reverse engineering work carried out on a 1:10 scale plaster maquette of the "Angel of the North", which is a life-size model of the sculptor's body without any arms. The three dimensional measurements of the maquette, made by analytical photogrammetric techniques, were then processed to produce a fully functional three dimensional CAD model from which the dimensions needed by the fabricating company, Hartlepool Steel Fabrications Ltd., could be extracted. Additionally, the VirtuoZo digital photogrammetric software package was used to investigate the potential of automated measurement for this type of work and the results were compared with those obtained analytically. 相似文献
This paper reviews the photogrammetric reverse engineering work carried out on a 1:10 scale plaster maquette of the "Angel of the North", which is a life-size model of the sculptor's body without any arms. The three dimensional measurements of the maquette, made by analytical photogrammetric techniques, were then processed to produce a fully functional three dimensional CAD model from which the dimensions needed by the fabricating company, Hartlepool Steel Fabrications Ltd., could be extracted. Additionally, the VirtuoZo digital photogrammetric software package was used to investigate the potential of automated measurement for this type of work and the results were compared with those obtained analytically. 相似文献
5.
针对摄影测量误差分析中存在的问题,提出了一种新的误差分析方法,把计算机仿真技术用于摄影测 量误差分析中,对框幅式影像建立了误差仿真分析系统,并对卫星影像和航空影像进行了误差影响分析,得到了 许多有价值的结论。 相似文献
6.
Close range photogrammetry projects rely upon a clear and unambiguous specification of end-user requirements to inform decisions relating to the format, coverage, accuracy and complexity of the final deliverable. Invariably such deliverables will be a partial and incomplete abstraction of the real world where the benefits of higher accuracy and increased complexity must be traded against the cost of the project. As photogrammetric technologies move into the digital era, computerisation offers opportunities for the photogrammetrist to revisit established mapping traditions in order to explore new markets. One such market is that for three-dimensional Virtual Reality (VR) models for clients who have previously had little exposure to the capabilities, and limitations, of photogrammetry and may have radically different views on the cost/benefit trade-offs in producing geometric models. This paper will present some examples of the authors' recent experience of such markets, drawn from a number of research and commercial projects directed towards the modelling of complex man-made objects. This experience seems to indicate that suitably configured digital image archives may form an important deliverable for a wide range of photogrammetric projects and supplement, or even replace, more traditional CAD models. 相似文献
7.
Digital Photogrammetry and Microscope Photographs 总被引:1,自引:0,他引:1
The feasibility of applying commercial digital photogrammetric software to the measurement of small objects photographed through an optical microscope has been examined. The objects, about 20 mm across, were photographed using a 35 mm film camera (at the lowest magnification setting of the Olympus microscope) giving photographs at a scale of 2:1. The photographs were then scanned before processing with the VirtuoZo digital photogrammetric system. Various problems needed to be overcome, some due to the limited options available with the highly automated digital system which was not designed for such measurement tasks. The unusual image scales, the uncommon pixel sizes and the unconventional and uncertain imaging geometry, all impeded immediate photogrammetric implementation. Photographic problems with the microscope were also faced, as with all microscope photogrammetry. Creating control points and independently assessing the accuracy of results at these scales were also difficult operations, but an analytical plotter was utilized for both these purposes and to verify the imaging geometry. Once such problems were overcome, image matching proceeded well and an accurate DTM could be created successfully, provided that a suitably textured object was chosen. 相似文献
8.
Evaluation of Information Loss in Digital Elevation Models With Digital Photogrammetric Systems 总被引:3,自引:0,他引:3
Y. D. Huang 《The Photogrammetric Record》2000,16(95):781-791
Information loss is caused when a surface is sampled with a finite interval, such as in the production of a digital elevation model (DEM). This information loss can become the dominant part of the error in a DEM. The ability to quantify information loss enables guidance to be provided for an appropriate choice of grid interval and better accuracy assessment for the DEM. With the use of digital photogrammetric systems, evaluation of information loss has become much easier. This paper describes three methods of evaluating information loss. An example is given of the method which is most appropriate for use with a digital photogrammetric system, based on rock cliff surface data and the VirtuoZo system. 相似文献
9.
通过对民用数码相机获取数码影像产生的误差来源进行分析,提出利用数码相机获取数码影像,并对其相机畸变差进行纠正,达到可量测化的目的,探讨低成本、多途径获取可量测化立体像对的可能性及方法。 相似文献
10.
D. P. Chapman 《The Photogrammetric Record》2000,16(95):763-779
As the performance of megapixel digital imaging systems continues to improve, the rapid growth of high-end consumer markets drives prices ever lower. When such cameras are married with emerging, desktop "photogrammetric" software packages, the close range photogrammetric community is faced with many new challenges and opportunities. The dramatic changes in the technological arena are matched by a rapidly changing business environment in which concepts such as "Partnering" and "Supply chain management" have become key themes. As organizations of all sizes seek to thrive within this new business landscape, there appears to be a willingness to think more flexibly about the client-supplier relationship and the sharing of risks and rewards. This, in turn, has encouraged the development of highly customized measurement solutions across a wide range of market sectors. In each of these solutions the emphasis is not on a generic photogrammetric product, but on a highly tailored system tightly coupled to existing workflows, and focused on the specific needs of the client. Such systems pose particular challenges to their designers, since they are frequently operated by users with relatively little photogrammetric background and yet must always meet the challenging requirement of producing an output which is "fit for purpose". Thus this paper hopes to show how novel megapixel imaging systems can be configured to deliver flexible measurement systems capable of millimetric level accuracy within the challenging engineering environments typical of the nuclear and process industries (hence the microsievert component of the title). 相似文献
11.
Manuel A. Aguilar Fernando J. Aguilar Francisco Agüera 《The Photogrammetric Record》2005,20(112):335-350
Generating maps of small areas using conventional aerial photography is of great interest for small engineering firms. The main problem is the high cost of the sophisticated digital photogrammetric workstations usually employed. In this paper, a low-cost close range photogrammetric software package is used to measure the three-dimensional coordinates of points on the land surface from a photogrammetric flight at a scale of approximately 1:5000. Furthermore, the influence of the type of scanner used to digitise photographs (consumer-grade or photogrammetric scanner), the resolution of the digital images and the number of control points required are examined. The root mean square errors obtained at the check points, using a low-cost close range software package, scanning aerial images with a photogrammetric scanner and 24 ground control points, were around 116 mm for X and Y coordinates, and 191 mm for Z. These levels of accuracy allow the generation of planimetric maps at a scale of 1:1500 and topographic maps with a contour interval of around 1 m. When the images were scanned with a consumer-grade scanner, the root mean square errors were around 150 mm for X and Y, and 271 mm for Z. 相似文献
12.
主要介绍JX-4C DPW微机数字摄影测量工作站与VirtuoZo全数字摄影测量系统这两款测绘软件在立体测图方面各自的特点以及在实际生产当中各自的优势与缺陷。同时介绍了这两款软件与MicroStation进行联机测图的应用方法。 相似文献
13.
14.
G. R. Hoffman 《The Photogrammetric Record》1995,15(86):205-216
The use of digital imagery, acquired through charge-coupled devices (CCDs) either by the scanning of hard copy film or direct capture through the use of a CCD camera, has fundamentally changed the photogrammetric environment. In order to fully exploit these digital image data, the photogrammetrist must employ system design, implementation philosophies and processing methodologies different from those of traditional film based photogrammetry. It is now possible for these new photogrammetric systems to be operated from low cost, high performance PC and Macintosh class commercial hardware, using vendor supplied software for user developed applications. This paper explores lessons learned and experiences gained from low cost, digital photogrammetric system development and CCD image exploitation. Examples and discussion presented in this paper include: (1) integration of user developed applications with commercial hardware and software; (2) user interface design; (3) validation of processing algorithms within the digital image domain; (4) system calibration; (5) digital image data handling, management and storage; and (6) image data compression. The film based photogrammetric system provides the point of departure to digital photogrammetry. Technical knowledge, system design and implementation and CCD image exploitation provide the experience. 相似文献
15.
The Z/I Imaging Digital Camera System 总被引:1,自引:0,他引:1
Market needs for airborne and spaceborne imagery used in photogrammetry and GIS applications are changing. Fundamental changes in sensors, platforms and applications are currently taking place. Most recently, new high resolution spaceborne sensors have become available. Besides classical photogrammetry, new thematic applications will drive the future image market. Savings in cost and time, together with the need for higher and reproducible radiometric resolution or spectral information will push forward the change from analogue to digital imagery. High resolution satellites will compete with airborne film-based photography and digital camera systems.
With the availability of a digital airborne camera, it is possible to completely close the digital chain from image acquisition to exploitation and data distribution. The key decision regarding the camera design in this case is whether a linear or area array sensor should be used. In view of the high geometric accuracy requirements in photogrammetry, Z/I Imaging has focused development on a digital camera based on an area sensor. An essential aspect of this decision was not only the aerial camera system, but also the entire photogrammetric process to the finished photographic or mapping product. If this point of view is adopted, it becomes clear that the development of a digital camera involves more than simply exchanging film for silicon. Aspects such as data transfer rates, in-flight data processing and storage, image archiving, georeferencing, colour fusion, calibration and preprocessing have the same influence on the economic assessment of a digital camera system. This paper describes current development activities and application aspects of a digital modular airborne camera system. 相似文献
With the availability of a digital airborne camera, it is possible to completely close the digital chain from image acquisition to exploitation and data distribution. The key decision regarding the camera design in this case is whether a linear or area array sensor should be used. In view of the high geometric accuracy requirements in photogrammetry, Z/I Imaging has focused development on a digital camera based on an area sensor. An essential aspect of this decision was not only the aerial camera system, but also the entire photogrammetric process to the finished photographic or mapping product. If this point of view is adopted, it becomes clear that the development of a digital camera involves more than simply exchanging film for silicon. Aspects such as data transfer rates, in-flight data processing and storage, image archiving, georeferencing, colour fusion, calibration and preprocessing have the same influence on the economic assessment of a digital camera system. This paper describes current development activities and application aspects of a digital modular airborne camera system. 相似文献
16.
The use of large-format digital cameras in aerial photogrammetry is leading to great improvements in photogrammetric production. Since they were first introduced about 10 years ago, the technological community has been testing and investigating the conditions under which this major change can be consolidated. But a certain (and understandable) bias may be noticed in the efforts that developers, researchers and clients are undertaking. Almost all of the efforts aim at checking the quality of automated measurements and very little attention has been directed to stereoscopic measurements by human operators, which, nevertheless, still represent an important task that needs to be carried out in the production chain. This paper presents the results from a number of tests (13 operators from a variety of enterprises) performed to check the stereoscopic precision of Vexcel UltraCamD camera images compared with Leica RC30 film images. The main conclusion to be drawn from the empirical data is that stereoscopic precision does not depend on the type of camera. 相似文献
17.
王有年 《武汉大学学报(信息科学版)》1987,12(2):64-72
在深入研究了联合平差的基本理论后,作者在VAX-11/750小型计算机上建立了一个主要适合于近景摄影测量的联合平差程序系统,它具有粗差的自动定位、系统误差补偿、进行多种观测值的同时平差等多种现代先进的摄影测量平差系统所应具备的功能。本文简要介绍该联合平差程序系统的有关基本理论、基本功能、基本结构及处理有关问题的基本方法,并举例说明联合平差及该程序系统在近景摄影测量中的应用。 相似文献
18.
Digital photogrammetric techniques have opened fresh horizons and have enabled photogrammetry to become a more user friendly tool for a wide range of applications. However cost remains a critical issue, because new digital photogrammetric workstations and their related software are considered expensive. This paper examines the problem of digital rectification and presents low cost solutions involving the use of commercial off the shelf software packages, which include graphics and painting software, image processing tools and a CAD system. Additionally, specially developed software performing vector rectification is described and discussed. All the packages have been used for rectifying digital images and the results are presented. An attempt is also made to assess the accuracy and reliability of the results. Finally, several alternative digital products are presented, mainly concerning the use of the methods described in the restitution of cultural monuments. 相似文献
19.
Effects of Jpeg Compression on the Accuracy of Digital Terrain Models Automatically Derived from Digital Aerial Images 总被引:2,自引:0,他引:2
It is well recognised that data volume represents a huge overhead for softcopy photogrammetry. For example, a file size of 100 Mbytes will be generated from a black and white aerial photograph if digitised with a resolution of 20μm. Large data volumes not only create storage problems but also affect the speed of image processing. As a consequence, data compression of image data is a matter of great significance. This paper describes an investigation into the effects of image compression on the accuracy of digital terrain models (DTMs) extracted from the compressed images. The JPEG system implemented in the Z/I Imaging ImageStation digital photogrammetric workstation (DPW) was used in the study. A systematic test has been carried out on the effect of different levels of JPEG compression (with Q-factors from 1 to 100) on the resulting DTM, which is automatically generated by the DPW using Match-T software. An analysis of the results from the two sites tested shows that image compression tends to cause more significant degradation when the image texture is richer, but that recommendations on Q-factors for use with the ImageStation appear to err on the side of caution. This analysis leads to some tentative conclusions and recommendations both for future investigation and for photogrammetric practice. 相似文献
20.
Photogrammetric and laser altimetric reconstruction of water levels for extreme flood event analysis 总被引:1,自引:0,他引:1
Stuart N. Lane Timothy D. James Hamish Pritchard Mark Saunders 《The Photogrammetric Record》2003,18(104):293-307
This paper assesses the feasibility of estimating water levels using digital photogrammetry. A common problem during an extreme flood event is that automated water level recorders do not record the highest water levels, as a result of instrument malfunctioning. This paper explores two possible solutions to this problem based upon data acquired using synoptic remote sensing methods. The first method requires: (a) high-resolution elevation data (for example, in the form of a digital elevation model for the floodplain); and (b) information on the planimetric position of the maximum flood extent, such as from debris lines (known as wrack lines) visible on aerial imagery flown after the event. The planimetric data can then be used to segment the topographic data in order to identify water level elevations. The second method uses a digitial photogrammetric approach and is suitable where no topographic data are available, but aerial imagery is available, flown after the event. Provided this imagery is of the right scale, digital photogrammetric analysis may be used to identify the elevations of wrack lines visible on the imagery. In this paper, the second of these options is compared with the first. The research shows that desktop photogrammetric methods, using 1:4500 scale imagery, can yield water level estimates that are precise to ±0·147 m, on the basis of check data obtained from lidar data. This is a worst possible estimate of the acquired precision given uncertainties in the lidar data. When compared with the first option, based upon segmenting lidar data using flood outlines, the photogrammetric approach was found to be preferable given both the quality of the lidar and uncertainties over how to segment it. 相似文献