Oxygen consumption in Macrotrachela musculosa and Trichotria truncata (Rotatoria) from the High Arctic

Oxygen consumption by rotifers Macrotrachela musculosa and Trichotria truncata from Spitsbergen tundra (77°N) was measured using the method of Cartesian divers. The metabolic rate of M. musculosa was: 0.205 10⁻³mm³ 0₂ per g 10⁻⁶ per hour at 2°C, 0.201 10⁻⁶mm³ at 6°C and 0.616 10⁻³mm³ 0₂ per g 10⁻⁶ per hour at 10°C. The metabolic rate of Trichotria truncata at 6° was 0.103 10⁻³mm³ per g 10⁻⁶ per hour. The relation between body weight and oxygen consumption by M. musculosa at 2°C is expressed with the equation R = 0.18W^0.67, with R – oxygen consumption in mm³10⁻³ per individual per hour and W – wet weight of an animal in g 10⁻⁶.     

Role of pore pressure generation in sediment transport within half-grabens

Sediment transport and overpressure generation are coupled primary through the impact of effective stress on subsidence and compaction. Here, we use mathematical modeling to explore the interactions between groundwater flow and diffusion-controlled sediment transport within alluvial basins. Because of lateral variation in permeability, proximal basin facies will have pore pressure close to hydrostatic levels while distal fine-grained facies can reach near lithostatic levels. Lateral variation in pore pressure leads to differential compaction, which deforms basins in several ways. Differential compaction reduces basin size, bends isochron surfaces across the sand–clay interface, restricts basinward progradation of sand facies, and reduces the amplitude of oscillation in the lateral position of the sand–clay interface especially in the deepest part of the section even when temporal sediment supply are held constant. Overpressure generation was found to be sensitive to change in sediment supply in permeable basins (at least 10⁻¹⁷ m² in our model). We found that during basin evolution, temporal variations in overpressure and sediment supply fluctuations are not necessarily in phase with each other, especially in tight (low permeability) basins (<10⁻¹⁷ m² in our model).     

One-year records of current and bottom pressure in the strait between Nordaustlandet and Kvitøya, Svalbard, 1980-81

we have obtained one year of measurements from a subsurface instrumented mooring carrying two current meters and one bottom pressure recorder in the strait between Nordaustlandet and Kvitøya in the northeastern Svalbard archipelago. The observations show a mixed tide with typical amplitudes 0.4 db and 10cm sec⁻¹. The semidiurnal tide is characterized by a progressive wave propagating toward the south. together with a cross-channel baroclinic mode. The annual average (non-tidal) current is less than 2cm sec⁻¹ toward the north-east, suggesting that the transport into the Arctic Ocean is approximately 0.2 × 10⁶m³s⁻¹.     

Numerical computation of the three-dimensional normal ellipsoidal field with a 10−2 m and 10−2 mgal accuracy

Summary. A new computation of the relevant geometrical and mechanical quantities pertaining to the three-dimensional normal ellipsoidal field (Bocchio) has been worked out with reference to a spatial grid ranging from 0 to 9000 m in dynamic height and from 0 to 90° in latitude, with a mesh size of 500 m and 1° respectively giving a better accuracy. An estimate of the latter at the upper end of the vertical interval gives 10⁻² m for the radii of curvature of the equipotential surfaces and 10⁻²mgal for normal gravity. Twenty-six functions of interest have been numerically computed including the metric tensor, Christoffel's symbols and the tensor of gravity gradients giving about 45 000 tabulated data.     

Coseismic and other short-term strain changes recorded with Sacks-Evertson strainmeters in a deep mine, South Africa

Summary. During 1977 March and April, three Sacks-Evertson borehole dilatometers were installed at the ends of boreholes drilled into the sidewall of an experimental tunnel at a depth of 3.1 km in the ERPM gold mine near Johannesburg. In the following year coseismic strain changes ranging from 5 ± 10⁻¹⁰ to values exceeding 5 ± 10⁻⁶ were recorded for hundreds of mine tremors in the magnitude range -1 to 3.7 and at hypocentral distances of 50 m to about 2 km. Hypocentral coordinates and magnitudes were determined from seismograms recorded from an underground array of geophones. Amplitudes and polarities of the coseismic strain steps are generally in excellent agreement with theoretical expectations based on point-source dislocation theory; specifically, the strain steps are proportional to the seismic moment divided by the cube of hypocentral distance. At a strain level of 5 ± 10⁻⁹ or greater the tremors do not appear to be preceded by any short-term indications of instability even for tremors producing coseismic steps greater than 5 ± 10⁻⁶ and for which the strainmeters were within a source radius of the hypocentre. Continuous strain changes observed at the times when the mine excavation, at a distance of about 100 m, is extended are in good agreement with calculated changes based on the theory of elasticity. A similar calculation is consistent with post-seismic strain changes observed to follow some of the closer tremors. These post-seismic strains show a logarithmic dependence on time following the tremor and appear to be due to the interaction of a tremor with the adjacent mine excavation rather than to deformation within the actual seismic source region.     

On the penetration of a hot diapir through a strongly temperature-dependent viscosity medium

Summary. The ascent of a hot spherical body through a fluid with a strongly temperature-dependent viscosity has been studied using an axisymmetric finite element method. Numerical solutions range over Peclet numbers of 10⁻¹– 10³ from constant viscosity up to viscosity variations of 10⁵. Both rigid and stress-free boundary conditions were applied at the surface of the sphere. The dependence of drag on viscosity variation was shown to have no dependence on the stress boundary condition except for a Stokes flow scaling factor. A Nusselt number parameterization based on the stress-free constant viscosity functional dependence on the Peclet number scaled by a parameter depending on the viscosity structure fits both stress-free and rigid boundary condition data above viscosity variations of 100. The temperature scale height was determined as a function of sphere radius. For the simple physical model studied in this paper pre-heating is required to reduce the ambient viscosity of the country rock to less than 10²² cm² s⁻¹ in order for a 10 km diapir to penetrate a distance of several radii.     

Distribution of Chemical Constituents in Superimposed Ice from Austre Brøggerbreen, Spitsbergen

10 m and 2.3 m ice cores were obtained on Austre Brøggerbreen, Spitsbergen in Svalbard (78°53 ' N, 11°56 ' E, 450 m a.s.l.) in September 1994 and in March 1995, respectively. Stratigraphy, bulk density, pH, electrical conductivity, and major ions were obtained from the core samples.
The chemical effect of meltwater percolation through snow/ice is examined. Good correlation between Cl⁻ and Na⁺ was obtained. The ratio of Cl⁻ to Na⁺ was 1.14 which was nearly the same value as in bulk sea water. However, the variation of Cl⁻/Na⁺ shows that higher ratio occured in the bubble-free ice. Furthermore the Cl⁻ ions remain in higher concentration than SO ₄ ²⁻ or Na⁺ ions.     

Seismic moment release during slab rupture beneath the Banda Sea

The highest intermediate depth moment release rates in Indonesia occur in the slab beneath the largely submerged segment of the Banda arc in the Banda Sea to the east of Roma, termed the Damar Zone. The most active, western-part of this zone is characterized by downdip extension, with moment release rates (∼10¹⁸ Nm yr^–1 per 50 km strike length) implying the slab is stretching at ∼10⁻¹⁴ s⁻¹ consistent with near complete slab decoupling across the 100–200 km depth range. Differential vertical stretching along the length of the Damar Zone is consistent with a slab rupture front at ∼100–200 km depth beneath Roma propagating eastwards at ∼100 km Myr^–1. Complexities in the slab deformation field are revealed by a narrow zone of anomalous in-plane P -axis trends beneath Damar, where subhorizontal constriction suggests extreme stress concentrations ∼100 km ahead of the slab rupture front. Such stress concentrations may explain the anomalously deep ocean gateways in this region, in which case ongoing slab rupture may have played a key role in modulating the Indonesian throughflow in the Banda Sea over the last few million years.     

The elastodynamic near field

Summary. The elastodynamic fields of point forces and shear dislocations of finite source duration are analysed with the aim of establishing the frequency and time-domain characteristics of the field in the near-source region. Criteria are obtained for amplitude dominance in regions where the source–sensor distance is much smaller than the wavelength.
It is shown that in the frequency domain , the Green's tensor (and hence the displacement field of a single point force) attenuates like R ⁻¹ in the near-source region and there exists no region in which the 'near-field' term becomes dominant such that the 'far-field' term can be neglected. Hence, there is no real 'near-field' term for the elastodynamic Green's tensor. The near-field terms of the displacements, velocities and accelerations excited by a shear dislocation attenuate like R ⁻², since the R ⁻³ and R ⁻⁴ terms tend to be eliminated due to mutual cancellation of P and S motions in the near-source region.
In the time domain , the corresponding near field of the displacement field is defined for the steady amplitude interval (away from transients) R /β < t < R /α+ T by the condition R ≤βT where β is the shear velocity and T is the source's duration. The relative strengths of all other arrivals will depend on the particular time window under consideration.
The particle motion patterns due to a single force in the near-source region are shown to be similar to rotating hyperbolas with an axis along the force direction, which are quite different from the 'smoke ring' motion patterns of the so-called 'near-field' term itself.     

Modelling of short-interval silent slip events in deeper subduction interfaces considering the frictional properties at the unstable–stable transition regime

Recent high-resolution observations of crustal movements have revealed silent slip events (SSEs) with propagation velocities of around 10–15 km d⁻¹ and with intervals of 3–14 months along the deeper parts of the Cascadia and Nankai subduction zones. This study develops 2-D and 3-D models of these short-interval SSEs considering the frictional behaviour that was confirmed experimentally by Shimamoto for the unstable–stable transition regime. To represent this frictional behaviour, a small cut-off velocity to an evolution effect is introduced in a rate- and state-dependent friction law. When the cut-off velocity to the evolution effect is significantly smaller than that to a direct effect, steady-state friction exhibits velocity weakening at low slip velocities and velocity strengthening at high slip velocities. At the deeper Cascadia and Nankai subduction interfaces, the pore pressure is inferred to be high because of the dehydration of materials in the descending plate. Under conditions where the pore-fluid pressure is nearly equal to the lithostatic pressure and the critical weakening displacement is very small, short-interval SSEs with propagation velocities and slip velocities of 4–8 km d⁻¹ and  2 − 4 × 10⁻⁷  m s⁻¹, respectively, can be reproduced. The propagation velocity of short-interval SSEs is in proportion to the slip velocity. The results also show that during the nucleation process of large earthquakes, the occurrence of short-interval SSEs becomes irregular because of the accelerated slips that occur at the bottom of the seismogenic zone. Our results suggest that monitoring of short-interval SSEs might be useful for forecasting the main earthquakes.     

Micromonas pusilla (Prasinophyceae) as part of pico-and nanoplankton communities of the Barents Sea

Micromonas pusilla (Butcher) Manton & Parke appears to be a prominent member of the Barents Sea picoplankton community as revealed by the serial dilution culture method. Cell numbers frequently exceeded 10⁷ cells 1⁻¹, though they usually varied between 10³and 10⁶ cells l⁻¹. A number of other identified and unidentified taxa were recorded and quantified. Distribution relative to the marginal ice zone is reported.     

The Residual Water Flow through the Solent, South England

Summary. A reduced equation of motion is used to compute the residual velocity and the residual transport through the West Solent from the water levels recorded over an eight-month period at tide gauges at either end of the channel. A coefficient of bottom friction of 5·0 × 10⁻³ is assumed. There was a spring-neap variation and a significant correlation of fluctuations in the residual velocity with meteorological conditions. Westward residual velocities occurred at spring tides with low barometric pressure and south-westerly winds. Eastward residual velocities occurred at neap tides with high pressure and north-easterly winds. Because of the progressive nature of the tidal wave the long term residual transport appeared to be towards the west and the flushing time for the Solent system was long for considerable periods. The maximum velocities experienced during a tidal cycle half way along the channel are towards the west with a probability of values exceeding 160 cm s⁻¹ for 10 min in 5·4 days.     

Explicit, approximate expressions for the resolution and a posteriori covariance of massive tomographic systems

We present an approximate method to estimate the resolution, covariance and correlation matrix for linear tomographic systems Ax = b that are too large to be solved by singular value decomposition. An explicit expression for the approximate inverse matrix A ⁻ is found using one-step backprojections on the Penrose condition AA ⁻≈ I , from which we calculate the statistical properties of the solution. The computation of A ⁻ can easily be parallelized, each column being constructed independently.
The method is validated on small systems for which the exact covariance can still be computed with singular value decomposition. Though A ⁻ is not accurate enough to actually compute the solution x , the qualitative agreement obtained for resolution and covariance is sufficient for many purposes, such as rough assessment of model precision or the reparametrization of the model by the grouping of correlating parameters. We present an example for the computation of the complete covariance matrix of a very large (69 043 × 9610) system with 5.9 × 10⁶ non-zero elements in A . Computation time is proportional to the number of non-zero elements in A . If the correlation matrix is computed for the purpose of reparametrization by combining highly correlating unknowns x _i , a further gain in efficiency can be obtained by neglecting the small elements in A , but a more accurate estimation of the correlation requires a full treatment of even the smaller A _ij . We finally develop a formalism to compute a damped version of A ⁻.     

Lipid composition of phytoplankton from the Barents Sea and environmental influences on the distribution pattern of carbon among photosynthetic end products

The colonial algae Phaeocystis pouchetii and Dinobryon pellucidum dominated the phytoplankton crop at three stations in the Polar Front area of the Barents Sea.
Lipid extracted from the seawater containing the phytoplankton was dominated by neutral lipid classes, particularly triacylglycerols, and phospholipids were more abundant than galactolipids at all stations. Polyunsaturated fatty acids comprised between 15 and 26% of fatty acids of total lipid.
Of the carbon assimilated into lipid over 24 hours, 40% was located in the neutral lipid fraction. Phospholipids contained a smaller proportion of fixed carbon than galactolipids.
No defiinte relationships were observed between the distribution of fixed carbon in photosynthetic end products and the temperature or irradiance at which the phytoplankton was incubated. At a constant irradiance of 8.5 μmol m⁻²s⁻¹, the highest proportion of fixed carbon was recovered in protein at 4.5°C, but at −1.5°C most radioactivity was present in low molecular weight compounds. Regardless of incubation conditions, lipid always contained less than 30% of total assimilated carbon.     

Long-period geomagnetic variations and mantle conductivity: an inversion using Bailey's method

Summary. We have implemented an algorithm which is based on Bailey's solution of the inverse problem of electromagnetic induction in the Earth. The study was motivated by recent determinations of very long period data and also benefited from recent redeterminations of high frequency data. The algorithm has been successfully tested to provide reliable estimates of conductivity down to a depth of 2000 km, using synthetic data in the period range from 4 days to 11 years. Smooth data sets, which are required for the inversion, were constructed from various sources. At a given depth, the range of inverted models is less than one order of magnitude. Due to the lack of high frequency data, the conductivity of the upper 600 km of the mantle, which is found to be of the order of 10⁻¹Ω⁻¹ m⁻¹, may be overestimated. The algorithm performs well in the middle mantle, where conductivity rises steadily from 1 to 50 Ω⁻¹ m⁻¹. The lack of very low frequency data and limitations of the algorithm prevent one from obtaining meaningful estimates in the lower mantle. However, the study of the propagation of the late 1960s secular variation acceleration provides an estimate of the mean conductivity of the whole mantle. Thus, a complete mantle profile can be constructed. It is found that deep mantle conductivity probability does not exceed a few hundred Ω⁻¹ m⁻¹.     

Experimental study of fracture at geological scale velocities

Summary. It is well-known that the chemical environment and the thermodynamical conditions play a fundamental role in the physics of the fracture properties of solids which in turn appear relevant in the understanding of the earthquake mechanism and related precursory phenomena. We designed and built an experimental apparatus capable of measuring the fracture velocities with control of the physical and chemical environment as well as of the applied stress. The apparatus consists of a chamber where both the total pressure and the partial pressure of gases can be controlled. The stress is applied in mode I (tension) configuration. The crack is detected optically on the surface of the sample with an ordinary microscope and the velocity of propagation is directly measured by the increase in length in the elapsed time. The very good stability of the system over very long periods allows us to measure crack velocities down to 10⁻¹² ms⁻¹. The propagation under such low-velocity regimes appears interesting from a geological standpoint since it implies extremely low stress values, which are generally assumed to have no effect on crustal rocks. The first results obtained will be discussed, with particular regard to the apparent dramatic influence of the partial pressure of water vapour in the crack propagation velocity.     

Large-scale velocity field and strain tensor in Iran inferred from GPS measurements: new insight for the present-day deformation pattern within NE Iran

A network of 26 GPS sites was implemented in Iran and Northern Oman to measure displacements in this part of the Arabia–Eurasia collision zone. We present the GPS velocity field obtained from three surveys performed in 1999 September, 2001 October and 2005 September and the deduced strain tensor. This study refines previous studies inferred from only the two first surveys. Improvements are significant in NE Iran. The present-day shortening rate across the mountain belts of NE Iran is estimated to 5 ± 1 mm yr⁻¹ at about N11°, 2 ± 1 mm yr⁻¹ of NS shortening across the eastern Kopet Dag and 3 ± 1 mm yr⁻¹ of NS shortening across Binalud and Kuh-e-Sorkh. Our GPS measurements emphasize the varying character of the Kopet Dag deformation between its southeastern part with prevailing thrusting at low rates and its northwestern part with dominant strike-slip activity at increasing rates. The principal axes of the horizontal strain tensor appears very homogeneous from the Zagros to the Alborz and the Kopet-Dag (N20°) and in eastern Iran (Makran and Lut block: N30°). Only NW Iran suffers a variable strain pattern which seems to wrap the Caspian basin. The strain tensor map underlines the existence of large homogeneous tectonic provinces in terms of style and amplitude of the deformation.     

Notes on the ecology and physiology of the Antarctic oribatid mite Maudheimia wilsoni

The oribatid mite Maudheimia wilsoni Dalenius was found to be numerous on the underside of stones at Jutulsessen (72°S, 3'E) in Dronning Maud Land, Antarctica. Daily temperature fluctuations of the microhabitat from as high as 19°C and to as low as – 17°C were observed during the austral summer. Optimal activity of the mites occurred at 10°C. Even in January the mean supercooling point of adult mites was as low as -30.8±4.7°C. Haemolymph osmolality ranged from 500 to 800mOsmol and thermal hystersis freezing points from −4.7 to −6.1°C. Adult mites had a mean water content of 43.6% and a water loss rate of 0.12 μgh⁻¹ at 15°C and 10% relative humidity.     

On the consistency of earthquake moment release and space geodetic strain rates: Europe

In this paper, approximately 100 VLBI/SLR/GPS velocities map European strain rates from <0.09 × 10⁻⁸ to >9.0 × 10⁻⁸ yr⁻¹ with regional uncertainties of 20 to 40 per cent. Kostrov's formula translates these strain-rate values into regional geodetic moment rates M¯˙ _geodetic . Two other moment rates, M¯˙ _seismic , extracted from a 100-year historical catalogue and M¯˙ _plate , taken from plate-tectonic models, contrast the geodetic rates. In Mediterranean Europe, the ratios of M¯˙ _seismic to M¯˙ _geodetic are between 0.50 and 0.71. In Turkey the ratio falls to 0.22. Although aseismic deformation may contribute to the earthquake deficit ( M¯˙ _seismic values less than M¯˙ _geodetic ), the evidence is not compelling because the magnitudes of the observed shortfalls coincide with the random variations expected in a 100-year catalogue. If the lack of aseismic deformation inferred from the 100-year catalogue holds true for longer periods, then much of Europe's strain budget would have to be accommodated by more frequent or larger earthquakes than have been experienced this century to raise the ratios of M¯˙ _seismic to M¯˙ _geodetic to unity. Improved geological fault data bases, longer historical earthquake catalogues, and densification of the continent's space geodetic network will clarify the roles of aseismic deformation versus statistical quiescence.     

Aseismic fault movement before the 1995 Kobe earthquake detected by a GPS survey: implication for preseismic stress localization?

By inversion analysis of the baseline changes and horizontal displacements observed with GPS (Global Positioning System) during 1990–1994, a high-angle reverse fault was detected in the Shikoku-Kinki region, southwest Japan. The active blind fault is characterized by reverse dip-slip (0.7±0.2  m yr⁻¹ within a layer 17–26  km deep) with a length of 208±5  km, a (down-dip) width of 9±2  km, a dip-angle of 51°±2° and a strike direction of 40°±2° (NE). Evidence from the geological investigation of subfaults close to the southwestern portion of the fault, two historical earthquakes ( M _L=7.0, 1789 and 6.4, 1955) near the centre of the fault, and an additional inversion analysis of the baseline changes recorded by the nationwide permanent GPS array from 18 January to 31 December 1995 partially demonstrates the existence of the fault, and suggests that it might be a reactivation of a pre-existing fault in this region. The fact that hardly any earthquakes ( M _L>2.0) occurred at depth on the inferred fault plane suggests that the fault activity was largely aseismic. Based on the parameters of the blind fault estimated in this study, we evaluated stress changes in this region. It is found that shear stress concentrated and increased by up to 2.1 bar yr⁻¹ at a depth of about 20  km around the epicentral area of the 1995 January 17  Kobe earthquake ( M _L=7.2, Japan), and that the earthquake hypocentre received a Coulomb failure stress of about 5.6 bar yr⁻¹ during 1990–1994. The results suggest that the 1995  Kobe earthquake could have been induced or triggered by aseismic fault movement.