A reappraisal of the metamorphic history of the Tehuitzingo chromitite,Puebla state,Mexico

ABSTRACT

The Tehuitzingo ultramafic body (Acatlán Complex, southern Mexico) is a strongly serpentinized harburgitic body that encloses chromitite bodies and blocks of eclogitic rocks. Hydrous retrograde metamorphism on chromitite bodies resulted in the formation of: i) partly altered chromite characterized by unaltered cores surrounded by Fe²⁺-rich and Al-depleted porous chromite containing chlorite; ii) porous chromite corresponding to a chromite that was entirely transformed to Fe²⁺-rich and Al-depleted porous chromite; and iii) zoned chromite formed by modified cores surrounded by Fe³⁺-rich non-porous chromite and magnetite rims. The content of minor and trace elements (Ga, Ti, Ni, Zn, Co, Mn, V, Sc) in the cores of partly altered chromite preserves the magmatic fingerprint of back-arc-bearing chromitites, while the cores of zoned chromite are enriched in Zn, Co and Mn but depleted in Ga, Ti, Ni and Sc, and display a metamorphic signature. P-T pseudosections performed in the system CrMFASH allow us to constrain the temperature of formation of Fe²⁺-rich chromite by reaction of magmatic chromite with olivine between 584 and 449 °C; while the new thermodynamic calculations performed in the FMASH system shows that the Fe³⁺-rich non-porous chromite and magnetite rims in zoned chromites were formed at lower temperatures (i.e. 270–340 ºC and < 20 kbar). Temperatures of alteration obtained using our new thermodynamic model are in agreement with the qualitative estimation that use minor and trace elements in Fe²⁺-rich chromite (i.e. 560–700 ºC). These temperatures are more restricted than those estimated for chlorite hosted in partly altered (193–481 ºC) and porous chromite (158–255 ºC), and those reported in host serpentinite and associated eclogitic rocks (210–399 ºC). A comparison of P-T conditions estimated by our new thermodynamic models and the distribution of minor and trace elements in the different zones of chromites allow us to infer that the alteration took place during the hydrous retrograde metamorphism, and that the high-pressure metamorphism did not modify the composition of chromites. Thus, the microstructural zoning displayed by chromite grains was formed during the exhumation of a segment of a back-arc-related oceanic lithosphere, at similar temperature conditions than the Tehuitzingo serpentinite.     

Alteration patterns of chromian spinels from La Cabaña peridotite,south-central Chile

La Cabaña peridotite is part of a dismembered ophiolite complex located within the metamorphic basement of the Coastal Cordillera of south-central Chile, and is the only location in Chile were Cr-spinels have been described so far. The La Cabaña peridotite is part of the Western Series unit, which comprises meta-sedimentary rocks, metabasites, and serpentinized ultramafic rocks. This unit has been affected by greenschist-facies metamorphism with reported peak PT conditions of 7.0–9.3 kbar and 380°–420 °C. Within La Cabaña peridotite Cr-spinels are present in two localities: Lavanderos and Centinela Bajo. In Lavanderos, Cr-spinel occurs in small chromitite pods and as accessory/disseminated grains with a porous or spongy texture in serpentinite, whereas in Centinela Bajo Cr-spinel is present as accessory zoned grains in partly serpentinized dunites, and in chromitite blocks. All Cr-spinels display variable degrees of alteration to Fe²⁺-rich chromite with a variation trend of major elements from chromite to Fe²⁺-rich chromite similar to those observed in other locations, i.e., an increase in Fe₂O₃ and FeO, a decrease in Al₂O₃ and MgO. Cr₂O₃ content increases from chromite to Fe²⁺-rich chromite in chromitite pods from Lavanderos and chromitite blocks from Centinela Bajo, but decreases in ferrian chromite zones in accessory grains from Centinela Bajo. The minor element (Ti, V, Zn, Ni) content is mostly low and does not exceed 0.4 wt.%, with the exception of MnO (<0.9 wt.%), which shows a correspondence with increasing degree of alteration. Cr# (Cr/Cr?+?Al) versus Mg# (Mg/Mg?+?Fe²⁺) and Fe³⁺/Fe³⁺+Fe²⁺ versus Mg# plots are used to illustrate the Cr-spinel alteration process. Overall, the Cr-spinels from Lavanderos (chromitite pods and disseminated grains) exhibit Cr# values ranging from 0.6 to 1.0, Mg# (Mg/Mg?+?Fe²⁺) below 0.5, and (Fe³⁺/Fe³⁺+Fe²⁺) <0.4. Cr-spinels from chromitites in Centinela Bajo have Cr# and Mg# values that range from 0.65 to 1.0, and 0.7-0.3, respectively, and (Fe³⁺/Fe³⁺+Fe²⁺)?3+/Fe³⁺+Fe²⁺) ratio is less than 0.4 in chromite cores and Fe²⁺-rich chromite, and >0.5 in ferrian chromite and Cr-magnetite. Interpretation of the data obtained and Cr-spinel textures indicate that the alteration of Cr-spinel is a progressive process that involves in its initial stages the reaction of chromite with olivine under water-saturated conditions to produce clinochlore and Fe²⁺-rich chromite. During this stage the chromite can also incorporate Ni, Mn, and/or Zn from the serpentinization fluids. As alteration progresses, Fe²⁺-rich chromite loses mass resulting in the development of a spongy texture. In a later stage and under more oxidizing conditions Fe³⁺ is incorporated in chromite/Fe²⁺-rich chromite shifting its composition to an Fe³⁺-rich chromite (i.e., ferrian chromite). Depending on the fluid/rock and Cr-spinel/silicate ratios, Cr-magnetite can also form over Fe²⁺-rich chromite and/or ferrian chromite as a secondary overgrowth. The compositional changes observed in Cr-spinels from La Cabaña reflect the initial stages of alteration under serpentinization conditions. Results from this study show that the alteration of Cr-spinels is dependent on temperature. The degree and extent of alteration (formation of Fe²⁺-rich and/or ferrian chromite) are controlled by the redox nature of the fluids, the Cr-spinel/silicate and the fluid/rock ratios.     

High- and low-Cr chromitite and dunite in a Tibetan ophiolite: evolution from mature subduction system to incipient forearc in the Neo-Tethyan Ocean

The microstructures, major- and trace-element compositions of minerals and electron backscattered diffraction (EBSD) maps of high- and low-Cr# [spinel Cr# = Cr³⁺/(Cr³⁺ + Al³⁺)] chromitites and dunites from the Zedang ophiolite in the Yarlung Zangbo Suture (South Tibet) have been used to reveal their genesis and the related geodynamic processes in the Neo-Tethyan Ocean. The high-Cr# (0.77–0.80) chromitites (with or without diopside exsolution) have chromite compositions consistent with initial crystallization by interaction between boninitic magmas, harzburgite and reaction-produced magmas in a shallow, mature mantle wedge. Some high-Cr# chromitites show crystal-plastic deformation and grain growth on previous chromite relics that have exsolved needles of diopside. These features are similar to those of the Luobusa high-Cr# chromitites, possibly recycled from the deep upper mantle in a mature subduction system. In contrast, mineralogical, chemical and EBSD features of the Zedang low-Cr# (0.49–0.67) chromitites and dunites and the silicate inclusions in chromite indicate that they formed by rapid interaction between forearc basaltic magmas (MORB-like but with rare subduction input) and the Zedang harzburgites in a dynamically extended, incipient forearc lithosphere. The evidence implies that the high-Cr# chromitites were produced or emplaced in an earlier mature arc (possibly Jurassic), while the low-Cr# associations formed in an incipient forearc during the initiation of a new episode of Neo-Tethyan subduction at ~130–120 Ma. This two-episode subduction model can provide a new explanation for the coexistence of high- and low-Cr# chromitites in the same volume of ophiolitic mantle.     

Origin of zoned spinel by coupled dissolution–precipitation and inter-crystalline diffusion: evidence from serpentinized wehrlite, Bangriposi, Eastern India

Textural and mineral–chemical characteristics in the Bangriposi wehrlites (Eastern India) provide insight into metamorphic processes that morphologically and chemically modified magmatic spinel during serpentinization of wehrlite. Aluminous chromite included in unaltered magmatic olivine is chemically homogenous. In sub-cm to 10s-of-micron-wide veins, magnetite associated with antigorite and clinochlore comprising the serpentine matrix is near-stoichiometric. But Al–Cr–Fe³⁺ spinels in the chlorite–magnetite veins are invariably zoned, e.g., chemically homogenous Al-rich chromite interior successively mantled by ferritchromite/Cr-rich magnetite zone and magnetite continuous with vein magnetite in the serpentine matrix. In aluminous chromite, ferritchromite/Cr-rich magnetite zones are symmetrically disposed adjacent to fracture-controlled magnetite veins that are physically continuous with magnetite rim. The morphology of ferritchromite–Cr-rich magnetite mimics the morphology of aluminous chromite interior but is incongruous with the exterior margin of magnetite mantle. Micropores are abundant in magnetite veins, but are fewer in and do not appear to be integral to the adjacent ferritchromite–Cr-rich magnetite zones. Sandwiched between chemically homogenous aluminous chromite interior and magnetite mantle, ferritchromite–Cr-rich magnetite zones show rim-ward decrease in Cr₂O₃, Al₂O₃ and MgO and complementary increase in Fe₂O₃ at constant FeO. In diffusion profiles, Fe₂O₃–Cr₂O₃ crossover coincides with Al₂O₃ decrease to values <0.5 wt% in ferritchromite zone, with Cr₂O₃ continuing to decrease within magnetite mantle. Following fluid-mediated (hydrous) dissolution of magmatic olivine and olivine + Al–chromite aggregates, antigorite + magnetite and chlorite + magnetite were transported in 10s-of-microns to sub-cm-wide veins and precipitated along porosity networks during serpentinization (T: 550–600 °C, f(O₂): ?19 to ?22 log units). These veins acted as conduits for precipitation of magnetite as mantles and veins apophytic in chemically/morphologically modified magmatic Al-rich chromite. Inter-crystalline diffusion induced by chemical gradient at interfaces separating aluminous chromite interiors and magnetite mantles/veins led to the growth of ferritchromite/Cr-rich magnetite zones, mimicking the morphology of chemically modified Al–Cr–Fe–Mg spinel interiors. Inter-crystalline diffusion outlasted fluid-mediated aluminous chromite dissolution, mass transfer and magnetite precipitation.     

Chromite composition and platinum-group mineral assemblage in the Uktus Uralian-Alaskan-type complex (Central Urals,Russia)

Chromitite segregations in dunites of the Uktus Uralian-Alaskan-type complex (Central Urals, Russia) display large variation of the chromite composition: Cr/(Cr+Al)=0.46-0.77, Fe²⁺/(Fe²⁺+Mg)=0.28-0.66, and Fe³⁺/(Fe³⁺+Fe²⁺)=0.23-0.59. Three types of PGM assemblages have been recognized, varying in accordance with chromite composition: type I, dominated by Ru-Os-Ir (sulfides), is associated with magnesiochromite having Fe³⁺/(Fe³⁺+Fe²⁺)<0.30, in the southern dunite body. Type II, containing abundant Pt-Ir (alloys, minor sulfides), is found in magnesiochromite with Fe³⁺/(Fe³⁺+Fe²⁺)=0.40-0.44; type III, consisting of Ir-Rh-Pt-Pd (alloys, sulfarsenides, antimonides) in Fe-rich chromite having Fe²⁺/(Fe²⁺+Mg)=0.66 and Fe³⁺/(Fe³⁺+Fe²⁺)=0.59. Positive anomalies of Ir and Pt, and a negative peak of Ru characterize the PGE patterns of chromitites with type II and III PGM assemblages, whereas a positive Pt anomaly is observed in their dunite host. Intensive fractionation of Pt-Fe alloys in the Uktus chromitites reflects the anomalous behavior of Pt which is decoupled from Rh and Pd. Among other factors, the high iron activity and oxygen fugacity in the parent melt appear to exert a major control on precipitation of Pt-Fe alloys, below sulfur saturation. The strong Pt anomaly in chromitites from Uktus may indicate that Uralian-Alaskan-type magmas were derived from a Pt-rich mantle source.     

The crystal chemistry of lithium and Fe3+ in synthetic orthopyroxene

Lithian ferrian enstatite with Li₂O = 1.39 wt% and Fe₂O₃ 7.54 wt% was synthesised in the (MgO–Li₂O–FeO–SiO₂–H₂O) system at P = 0.3 GPa, T = 1,000°C, fO₂ = +2 Pbca, and a = 18.2113(7), b = 8.8172(3), c = 5.2050(2) Å, V = 835.79(9) Å³. The composition of the orthopyroxene was determined combining EMP, LA-ICP-MS and single-crystal XRD analysis, yielding the unit formula ^M2(Mg_0.59Fe _0.21 ²⁺ Li_0.20) ^M1(Mg_0.74Fe _0.20 ³⁺ Fe _0.06 ²⁺ ) Si₂O₆. Structure refinements done on crystals obtained from synthesis runs with variable Mg-content show that the orthopyroxene is virtually constant in composition and hence in structure, whereas coexisting clinopyroxenes occurring both as individual grains or thin rims around the orthopyroxene crystals have variable amounts of Li, Fe³⁺ and Mg contents. Structure refinement shows that Li is ordered at the M2 site and Fe³⁺ is ordered at the M1 site of the orthopyroxene, whereas Mg (and Fe²⁺) distributes over both octahedral sites. The main geometrical variations observed for Li-rich samples are actually due to the presence of Fe³⁺, which affects significantly the geometry of the M1 site; changes in the geometry of the M2 site due to the lower coordination of Li are likely to affect both the degree and the kinetics of the non-convergent Fe²⁺-Mg ordering process in octahedral sites.     

Geodynamic implications of ophiolitic chromitites in the La Cabaña ultramafic bodies,Central Chile

Chromitites (>80% volume chromite) hosted in two ultramafic bodies (Lavanderos and Centinela Bajo) from the Palaeozoic metamorphic basement of the Chilean Coastal Cordillera were studied in terms of their chromite composition, platinum-group element (PGE) abundances, and Re-Os isotopic systematics. Primary chromite (Cr# = 0.64–0.66; Mg# = 48.71–51.81) is only preserved in some massive chromitites from the Centinela Bajo ultramafic body. This chemical fingerprint is similar to other high-Cr chromitites from ophiolite complexes, suggesting that they crystallized from arc-type melt similar to high-Mg island-arc tholeiites (IAT) and boninites in supra-subduction mantle. The chromitites display enrichment in IPGE (Os, Ir, Ru) over PPGE (Rh, Pt, Pd), with PGE concentrations between 180 and 347 ppb, as is typical of chromitites hosted in the mantle of supra-subduction zone (SSZ) ophiolites. Laurite (RuS₂)-erlichmanite (OsS₂) phases are the most abundant inclusions of platinum-group minerals (PGM) in chromite, indicating crystallization from S-undersaturated melts in the sub-arc mantle. The metamorphism associated with the emplacement of the ultramafic bodies in the La Cabaña has been determined to be ca. 300 Ma, based on K-Ar dating of fuchsite. Initial ¹⁸⁷Os/¹⁸⁸Os ratios for four chromitite samples, calculated for this age, range from 0.1248 to 0.1271. These isotopic compositions are well within the range of chromitites hosted in the mantle section of other Phanaerozoic ophiolites. Collectively, these mineralogical and geochemical features are interpreted in terms of chromite crystallization in dunite channels beneath a spreading centre that opened a marginal basin above a supra-subduction zone. This implies that chromitite-bearing serpentinites in the metamorphic basement of the Coastal Cordillera are of oceanic-mantle origin and not oceanic crust as previously suggested. We suggest that old subcontinental mantle underlying the hypothetical Chilenia micro-continent was unroofed and later altered during the opening of the marginal basin. This defined the compositional and structural framework in which the protoliths of the meta-igneous and meta-sedimentary rocks of the Eastern and Western Series of the Chilean Coastal Cordillera basement were formed.     

Base metal mineral segregation and Fe-Mg exchange inducing extreme compositions of olivine and chromite from the Xiadong Alaskan-type complex in the southern part of the Central Asian Orogenic Belt

The Xiadong Alaskan-type complex shares much in common with typical Alaskan-type complexes worldwide, while showing some unique features in terms of mineral compositions. Olivine from the Xiadong dunites is characterized by extremely high Fo component of 91.7–96.7 and anomalously negative correlation of Fo with NiO, while chromite is featured by high 100 × Fe³⁺/(Fe³⁺ + Cr + Al) (>70), high 100 × Fe²⁺/(Fe²⁺ + Mg) (>70), high 100 × Cr/(Cr + Al) (>90), low MnO (<0.6 wt%) and TiO₂ contents (<0.5 wt%). To investigate these particular features, we conducted petrographic observation and mineral composition analyses for the Xiadong dunite. A number of Fe and/or Ni sulfides and alloys occurring as inclusions in olivine and chromite indicate that base metal mineral segregation took place prior to crystallization of olivine and chromite and probably induced Fe and Ni depletions in olivine. The FeO and MgO variations in profile analyses from chromite to adjacent olivine are compatible with Fe-Mg exchange. The diffusion mechanism of Fe from olivine to chromite and Mg from chromite to olivine may have elevated both Fo of olivine and 100 × Fe²⁺/(Mg + Fe²⁺) ratio of chromite and further enhanced the decoupling of Fo and NiO in olivine. We thus suggest that base metal mineral segregation and Fe-Mg exchange play important roles in the extreme compositions of the Xiadong dunite. The Ni depletion of olivine and degree of Fe-Mg exchange between olivine and chromite may be used as indicators of mineralization in mafic-ultramafic intrusions.     

Ages and compositions of primary and secondary allanite from the Lala Fe–Cu deposit,SW China: implications for multiple episodes of hydrothermal events

Numerous Fe–Cu deposits in southwestern China form the Kangdian Iron-Oxide Copper-Gold (IOCG) metallogenic Province. These deposits have a close association of Fe-oxides and Cu-sulfides formed at different stages, which are possibly related to multiple hydrothermal events. In this paper, U–Pb dating and chemical analyses on allanite from different stages of the Lala deposit were used to constrain timing and origin of such events. Allanite occurs as disseminated grains or patches in Fe–Cu ores and is closely associated with chalcopyrite, molybdenite, calcite and minor titanite, postdating magnetite and apatite. High-resolution backscattered electronic (BSE) imaging, electron microprobe compositions and X-ray scanning profiles demonstrate that REE-rich primary allanite was replaced by later, relatively porous and REE-poor secondary allanite. Such a replacement was promoted by interaction between primary allanite and fluid fluxes infiltrating the minerals, following an exchange scheme of REE³⁺ + Fe²⁺ → Ca²⁺ + Al³⁺. The secondary allanite has higher Fe³⁺/(Fe³⁺+Fe²⁺) ratios and U contents, indicating involvement of relatively oxidized fluids during alteration. The alteration has also produced unidentified secondary REE minerals in fractures, indicating re-deposition of some of the removed REEs. The primary and secondary allanites are dated by in situ LA-ICP-MS technique and have U–Pb ages of 1,067 ± 41 Ma and 880–850 Ma, respectively. The ~1.07 Ga primary allanite was contemporaneous with the main Mo–Cu–LREE mineralization with a molybdenite Re–Os age of ~1.08 Ga. The 880–850 Ma secondary allanite is comparable with the Ar–Ar ages (890–830 Ma) of biotite from hosting schists and undeformed sulfide veins occurring throughout the Kangdian Province, suggesting that such an event was possibly syn-deformational and represents a younger hydrothermal event. Occurrences of both primary and secondary allanites suggest that the mineralization may have involved multiple tectonothermal events including the ~1.05–1.1 Ga intra-plate and subsequent 960–740 Ma arc magmatism in the Kangdian region.     

Relict chromian spinels in Tulu Dimtu serpentinites and listvenite,Western Ethiopia: implications for the timing of listvenite formation

Serpentinites (massive and schistose) and listvenite occur as tectonic sheets and lenses within a calcareous metasedimentary mélange of the Tulu Dimtu, western Ethiopia. The massive serpentinite contains high-magnesian metamorphic olivine (forsterite [fo] ~96 mol%) and rare relict primary mantle olivine (Fo_90–93). Both massive and schistose serpentinites contain zoned chromian spinel; the cores with the ferritchromite rims preserve a pristine Cr/(Cr+Al) atomic ratio (Cr# = 0.79–0.87), suggesting a highly depleted residual mantle peridotite, likely formed in a suprasubduction zone setting. Listvenite associated with serpentinites of smaller ultramafic lenses also contain relict chromian spinel having identical Cr# to those observed in serpentinites. However, the relict chromian spinel in listvenite has significantly higher Mg/(Mg+Fe²⁺) atomic ratios. This suggests that a nearly complete metasomatic replacement of ultramafic rocks by magnesite, talc, and quartz to prevent Mg–Fe²⁺ redistribution between relict chromian spinel and the host, that is, listvenite formation, took place prior to re-equilibration between chromian spinel and the surrounding mafic minerals in serpentinites. Considering together with the regional geological context, low-temperature CO₂-rich hydrothermal fluids would have infiltrated into ultramafic rocks from host calcareous sedimentary rocks at a shallow level of accretionary prism before a continental collision to form the East African Orogen (EAO).     

Structural changes in the FeAl2O4–FeCr2O4 solid solution series and their consequences on natural Cr-bearing spinels

The influence of Al–Cr substitution on the spinel structure was studied in synthetic single crystals belonging to the FeCr₂O₄–FeAl₂O₄ series produced by flux growth at 1,000–1,300 °C in controlled atmosphere. Samples were characterized by single-crystal X-ray diffraction, electron microprobe analyses and Mössbauer spectroscopy. Crystals of sufficient size and quality for single-crystal X-ray diffraction were obtained in the ranges Chr_0–0.45 and Chr_70–100 but not for intermediate compositions, possibly due to a reduced stability in this range. The increase in chromite component leads to an increase in the cell edge from 8.1534 (6) to 8.3672 (1) Å and a decrease in the u parameter from 0.2645 (2) to 0.2628 (1). Chemical analyses show that Fe²⁺ is very close to 1 apfu (0.994–1.007), Al is in the range 0.0793–1.981 apfu, Cr between 0 and 1.925 apfu. In some cases, Fe³⁺ is present in amounts up to 0.031 apfu. Spinels with intermediate Cr content (Chr component between 40 and 60) are strongly zoned with Cr-rich cores and Cr-poor rims. Mössbauer analyses on powdered spinels of the runs from which single crystal has been used for X-ray structural data show values of Fe³⁺/Fe_tot consistently larger than that calculated by EMPA on single crystals, presumably due to chemical variation between single crystals from the same runs. The synthesis runs ended at a temperature of 1,000 °C, but it is possible that cation ordering continued in the Cr-poor samples towards lower temperatures, possibly down to 700 °C.     

The role of silica in the hydrous metamorphism of chromite

Retrograde hydrous metamorphism has produced three types of microstructures in chromite grains from chromitites and enclosing rocks of the Tapo Ultramafic Massif (Central Peruvian Andes). In semi-massive chromitites (60–80 vol% chromite), (i) partly altered chromite with homogeneous cores surrounded by lower Al₂O₃ and MgO but higher Cr₂O₃ and FeO porous chromite with chlorite filling the pores. In serpentinites (ii) zoned chromite with homogeneous cores surrounded by extremely higher Fe₂O₃ non-porous chromite and magnetite rims, and (iii) non-porous chromite grains. The different patterns of zoning in chromite grains are the consequences of the infiltration of reducing and SiO₂-rich fluids and the subsequent heterogeneous interaction with more oxidizing and Fe-bearing fluids. During the first stage of alteration under reduced conditions magmatic chromite is dissolved meanwhile new metamorphogenic porous chromite crystallizes in equilibrium with chlorite. This reaction that involves dissolution and precipitation of minerals is here modeled thermodynamically for the first time. µSiO₂-µMgO pseudosection calculated for unaltered semi-massive chromitites at 2 kbar and 300 °C, the lowest P-T conditions inferred from the Tapo Ultramafic Massif and Marañón Complex, predicts that chromite + chlorite (i.e., partly altered chromite) is stable instead of chromite + chlorite + brucite at progressive higher µSiO₂ but lower µMgO. Our observation is twofold as it reveals that the important role of SiO₂ and MgO and the open-nature of this process. P-T-X diagrams computed using the different P-T pathways estimated for the enclosing Tapo Ultramafic Massif reproduce well the partial equilibrium sequence of mineral assemblages preserved in the chromitites. Nevertheless, it is restricted only to the P-T conditions of the metamorphic peak and that of the latest overprint. Our estimations reveal that a high fluid/rock ratio (1:40 ratio) is required to produce the microstructures and compositional changes observed in the chromitites from the Tapo Ultramafic Massif. The circulation of SiO₂-rich fluids and the mobilization of MgO from the chromitite bodies are linked with the formation of garnet amphibolites and carbonate-silica hydrothermalites (i.e., listwaenites and birbirites) in the ultramafic massif. The origin of these fluids is interpreted as a result of the dissolution of orthopyroxene and/or olivine from the metaharzburgites and metagabbros enclosed in the Tapo Ultramafic Massif.     

A secondary precious and base metal mineralization in chromitites linked to the development of a Paleozoic accretionary complex in Central Chile

Platinum-group element (PGE) and gold inclusions are usually present in peridotites and chromitite deposits associated with ophiolites. Here, we present the first detailed study of the mineralogy of precious metals in ultramafic rocks hosted in the Paleozoic Coastal Accretionary Complex of Central Chile. In these ultramafic rocks the mineralization of precious metals is associated with small meter-size pods and veins of massive chromitite hosted in serpentinite-filled shear zones. Crystallographic orientation maps of single chromite grains, obtained using the Electron-Backscattered Secondary Diffraction technique, allow us to identify two types of chromite in the precious-metal bearing chromitites: (1) Type A chromite, characterized by an average misorientation per grain of ≤ 2° and chemically homogeneous cores surrounded by a porous rim with abundant inclusions of chlorite, and (2) Type B chromite, which exhibits higher degrees of misorientation (2–8°) and porosity, and abundant silicate inclusions, but a relatively homogeneous chemical composition. In situ analyses using EMPA and LA-ICP-MS for major, minor and trace elements indicate that composition of the magmatic chromite is only preserved in the cores of Type A chromite grains. Core to rim chemical trends in these Type A chromites are characterized by a progressive increase of the Cr# with a decrease of the Mg#, loss of Al and addition of Fe^2 + in the porous rim. The observed changes in the microstructure and chemistry of chromite are associated with the infiltration of external fluids through shear zones filled with antigorite (± talc) developed in partly serpentinized peridotites (i.e., olivine–lizardite dunites). Thermodynamic calculations using the phase equilibria relations in the system Cr₂O₃–MgO–FeO–Al₂O₃–SiO₂–H₂O (CrMFASH) indicate that Fe^2 +-rich porous chromite + chlorite replaced the original assemblage chromite + olivine in the chromitite while prograde antigorite was formed. According to our results this transformation occurred at ~ 510–560 °C when external fluids penetrated the ultramafic/chromitite bodies through shear zones. These temperatures are slightly higher than estimated for the metamorphic peak in the host metapelitic rocks (i.e., ~ 420 °C at 9.3 kbar), suggesting that a hotter ultramafic body was captured by the metasediments of the accretionary prism during their exhumation through subduction channel. Chlorite geothermometry yielded a wide range of lower temperature from 430 to 188 °C, for chlorite present in the porous chromite rims. These results are in agreement with the retrograde overprint under greenchist-facies metamorphism conditions recorded by metapelitic host rocks and minor volcanogenic massive sulphide deposits in the area (300–400 °C, ~ 3–4 kbar). We suggest that although initially decoupled, the chromitite-bearing ultramafic rocks and their metasedimentary host undergone a common metamorphic PT pathway of exhumation during the formation and evolution of the subduction-related accretionary complex.The chromitites contain appreciable amounts of the platinum-group elements (up to 347 ppb total) and gold (up to 24 ppb), present as inclusions of platinum-group minerals (PGM) and alloys as well as native gold. The PGM identified include native osmium, laurite (RuS₂), irarsite (IrAsS), osarsite (OsAsS), omeiite (OsAs₂), Pt–Fe alloy (possibly isoferroplatinum) and a suite of inadequately identified phases such as PtSb (possibly stumpflite), PdHg (possibly potarite), RhS, Ir–Ni and Ir–Ni–Ru compounds. Only a few grains of osmium and laurite were identified in unaltered cores of chromite and therefore considered as magmatic in origin formed during the high-T event of chomite crystallisation in the upper mantle. The other PGM were located in the porous chromite associated with chlorite or base-metal minerals (BMM) that often fill the pores of this altered chromite or are intergrowth with antigorite in the host serpentinized ultramafic rock. The assemblage of BMM identified in the studied rocks include sulphides [millerite (NiS), polydymite (Ni₃S₄), violarite (FeNi₂S₄), galena (PbS), sphalerite (ZnS), chalcocite (CuS)], arsenides [(orcelite (Ni_5 − xAs₂) and maucherite (Ni₁₁As₈)], the sulpharsenide gersdorfitte (NiAsS), and native bismuth. The irregular shape of several PGM grains observed in porous chromite suggest disequilibrium, whereas others exhibit perfectly developed crystal faces with the associated secondary silicate or base-metal mineral suggesting neoformation of PGMs in situ from metamorphic fluids. We suggest that the origin of these PGM inclusions is magmatic, but some grains were reworked in situ when metalloid (i.e., As, Sb, Pb, Zn and Hg)-rich fluids released from metasediments penetrated the ultramafic rocks through active shear zones, once the ultramafic bodies became tectonically mixed with the host metasedimentary host rocks. During this event, gold sourced from the (meta)sediments was also precipitated within chromitites and serpentinites.     

Cation substitution in synthetic meridianiite (MgSO<Subscript>4</Subscript>·11H<Subscript>2</Subscript>O) I: X-ray powder diffraction analysis of quenched polycrystalline aggregates

Meridianiite, MgSO₄·11H₂O, is the most highly hydrated phase in the binary MgSO₄–H₂O system. Lower hydrates in the MgSO₄–H₂O system have end-member analogues containing alternative divalent metal cations (Ni²⁺, Zn²⁺, Mn²⁺, Cu²⁺, Fe²⁺, and Co²⁺) and exhibit extensive solid solution with MgSO₄ and with one another, but no other undecahydrate is known. We have prepared aqueous MgSO₄ solutions doped with these other cations in proportions up to and including the pure end-members. These liquids have been solidified into fine-grained polycrystalline blocks of metal sulfate hydrate + ice by rapid quenching in liquid nitrogen. The solid products have been characterised by X-ray powder diffraction, and the onset of partial melting has been quantified using a thermal probe. We have established that of the seven end-member metal sulfates studied, only MgSO₄ forms an undecahydrate; ZnSO₄ forms an orthorhombic heptahydrate (synthetic goslarite), MnSO₄, FeSO₄, and CoSO₄ form monoclinic heptahydrates (syn. mallardite, melanterite, bieberite, respectively), and CuSO₄ crystallises as the well-known triclinic pentahydrate (syn. chalcanthite). NiSO₄ forms a new hydrate which has been indexed with a triclinic unit cell of dimensions a = 6.1275(1) Å, b = 6.8628(1) Å, c = 12.6318(2) Å, α = 92.904(2)°, β = 97.678(2)°, and γ = 96.618(2)°. The unit-cell volume of this crystal, V = 521.74(1) ų, is consistent with it being an octahydrate, NiSO₄·8H₂O. Further analysis of doped specimens has shown that synthetic meridianiite is able to accommodate significant quantities of foreign cations in its structure; of the order 50 mol. % Co²⁺ or Mn²⁺, 20–30 mol. % Ni²⁺ or Zn²⁺, but less than 10 mol. % of Cu²⁺ or Fe²⁺. In three of the systems we examined, an ‘intermediate’ phase occurred that differed in hydration state both from the Mg-bearing meridianiite end-member and the pure dopant end-member hydrate. In the case of CuSO₄, we observed a melanterite-structured heptahydrate at Cu/(Cu + Mg) = 0.5, which we identify as synthetic alpersite [(Mg_0.5Cu_0.5)SO₄·7H₂O)]. In the NiSO₄- and ZnSO₄-doped systems we characterised an entirely new hydrate which could also be identified to a lesser degree in the CuSO₄- and the FeSO₄-doped systems. The Ni-doped substance has been indexed with a monoclinic unit-cell of dimensions a = 6.7488(2) Å, b = 11.9613(4) Å, c = 14.6321(5) Å, and β = 95.047(3)°, systematic absences being indicative of space-group P2₁/c with Z = 4. The unit-cell volume, V = 1,176.59(5) ų, is consistent with it being an enneahydrate [i.e. (Mg_0.5Ni_0.5)SO₄·9H₂O)]. Similarly, the new Zn-bearing enneahydrate has refined unit cell dimensions of a = 6.7555(3) Å, b = 11.9834(5) Å, c = 14.6666(8) Å, β = 95.020(4)°, V = 1,182.77(7) ų, and the new Fe-bearing enneahydrate has refined unit cell dimensions of a = 6.7726(3) Å, b = 12.0077(3) Å, c = 14.6920(5) Å, β = 95.037(3)°, and V = 1,190.20(6) ų. The observation that synthetic meridianiite can form in the presence of, and accommodate significant quantities of other ions increases the likelihood that this mineral will occur naturally on Mars—and elsewhere in the outer solar system—in metalliferous brines.     

Chromium solubility in anhydrous Phase B

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.     

Microanalysis of the iron oxidation state in (Mg,Fe)O and application to the study of microscale processes

We report application of the flank method using the electron microprobe to a suite of twelve (Mg,Fe)O samples with composition 2–47 wt% Fe and Fe³⁺/ΣFe = 1 to 11%, where Fe³⁺/ΣFe was determined independently using Mössbauer spectroscopy on the same grains used for the flank method measurements. A calibration curve of the form Fe²⁺ = A + B × (ΣFe)² + C × (Lβ/Lα) was fit to the data and gave excellent agreement between Fe³⁺/ΣFe calculated from the flank method and Fe³⁺/ΣFe determined using Mössbauer spectroscopy. We found the method to be sufficiently sensitive to determine meaningful variations in Fe³⁺/ΣFe for geophysically relevant compositions of (Mg,Fe)O (<25 wt% Fe), and calibration parameters remained constant within experimental uncertainty over the course of the entire study (20 months). Flank method measurements on an inhomogeneous sample of synthetic (Mg,Fe)O showed evidence of diffusion processes resulting from rupture of the capsule during the high-pressure experiment and the possibility to measure Lβ/Lα variations with a spatial resolution of a few microns. We detected the presence of exsolved magnesioferrite in a suite of (Mg,Fe)O single crystals using transmission electron microscopy and Mössbauer spectroscopy. Flank method measurements on the same suite of single crystals showed enhanced Fe³⁺/ΣFe values, consistent with the presence of magnesioferrite even though the grains were too small to be resolved by conventional electron microprobe measurements.     

Crystallographic,Mössbauer and electrokinetic study of synthetic lipscombite

The transformation of vivianite and the direct synthesis starting from pure chemicals lead to the formation of lipscombite {Fe _x ²⁺ Fe _3?x ³⁺ [(OH)_3?x/(PO₄)₂]} with varying Fe²⁺/Fe³⁺ molar ratios. The influence of this ratio on the Mössbauer spectra, solubility, electrokinetic potential and infrared spectra has been studied. By means of Mössbauer spectroscopy, the distribution of the Fe²⁺ and Fe³⁺ ions between the octahedral sites I and II has been investigated. The unit cell dimensions have been determined from Guinier-Hägg X-ray diffraction patterns. The crystal system is tetragonal for synthetic lipscombite with a=5.3020±0.0005 Å and c=12.8800±0.0005 Å. Lipscombite has been found to show a negative and time-dependent zeta-potential which, moreover, is influenced by the pH of the suspension and the Fe²⁺/Fe³⁺ molar ratio. An explanation of the time-dependence of the zeta-potential on variations of solubility is proposed. Infrared absorption spectrum only is characterized by two absorption bands: v _OH(3,500 cm^?1) and v _P?O(1,100-960 cm^?1). The density at 25° C is determined in toluene as 3.36±0.01 g·cm^?3.     

Occurrence of an Alaskan-type complex in the Middle Tianshan Massif,Central Asian Orogenic Belt: inferences from petrological and mineralogical studies

The Xiadong mafic–ultramafic complex lies in the central part of the Middle Tianshan Massif (MTM), along the southern margin of the Central Asian Orogenic Belt (CAOB). This complex is composed of dunite, hornblende (Hbl) clinopyroxenite, hornblendite, and Hbl gabbro. These rocks are characterized by adcumulated textures and variable alteration. Orthopyroxene is an extremely rare mineral in all rock units and plagioclase is absent in dunite and Hbl clinopyroxenite. Hbl, Fe-chromite, and Cr-magnetite are common phases. Olivines have forsterite (Fo) contents ranging from 92.3 to 96.6. Clinopyroxenes are Ca-rich, Ti-poor diopsides, and mostly altered to tremolites or actinolites. Chromites display low TiO₂ and Al₂O₃ contents and high Cr# and Fe²⁺/(Fe²⁺ + Mg) values. Primary and secondary Hbls show wide compositional variations. These petrological and mineralogical features as well as mineral chemistry are comparable to typical Alaskan-type complexes worldwide, which are widely considered to have formed above subduction zones. The chemistry of clinopyroxene and chromite supports an arc plate-tectonic origin for the Xiadong complex. Its confirmation as an Alaskan-type complex implies that the MTM, with Precambrian basement, was probably a continental arc during oceanic plate underflow and further supports the hypothesis of southward subduction of the Palaeozoic Junggar Ocean.     

Effects of temperature on the crystal structure of epidote: a neutron single-crystal diffraction study at 293 and 1,070 K

The effects of temperature on the crystal structure of a natural epidote [Ca_1.925 Fe_0.745Al_2.265Ti_0.004Si_3.037O₁₂(OH), a = 8.890(6), b = 5.630(4), c = 10.150(6) Å and β = 115.36(5)°, Sp. Gr. P2₁ /m] have been investigated by means of neutron single-crystal diffraction at 293 and 1,070 K. At room conditions, the structural refinement confirms the presence of Fe³⁺ at the M₃ site [%Fe(M3) = 73.1(8)%] and all attempts to refine the amount of Fe at the M(1) site were unsuccessful. Only one independent proton site was located. Two possible hydrogen bonds, with O(2) and O(4) as acceptors [i.e. O(10)–H(1)···O(2) and O(10)–H(1)···O(4)], occur. However, the topological configuration of the bonds suggests that the O(10)–H(1)···O(4) is energetically more favourable, as H(1)···O(4) = 1.9731(28) Å, O(10)···O(4) = 2.9318(22) Å and O(10)–H(1)···O4 = 166.7(2)°, whereas H(1)···O(2) = 2.5921(23) Å, O(10)···O(2) = 2.8221(17) Å and O(10)–H(1)···O2 = 93.3(1)°. The O(10)–H(1) bond distance corrected for “riding motion” is 0.9943 Å. The diffraction data at 1,070 K show that epidote is stable within the T-range investigated, and that its crystallinity is maintained. A positive thermal expansion is observed along all the three crystallographic axes. At 1,070 K the structural refinement again shows that Fe³⁺ share the M(3) site along with Al³⁺ [%Fe(M3)_1,070K = 74(2)%]. The refined amount of Fe³⁺ at the M(1) is not significant [%Fe(M1)_1,070K = 1(2)%]. The tetrahedral and octahedral bond distances and angles show a slight distortion of the polyhedra at high-T, but a significant increase of the bond distances compared to those at room temperature is observed, especially for bond distances corrected for “rigid body motions”. The high-T conditions also affect the inter-polyhedral configurations: the bridging angle Si(2)–O(9)–Si(1) of the Si₂O₇ group increases significantly with T. The high-T structure refinement shows that no dehydration effect occurs at least within the T-range investigated. The configuration of the H-bonding is basically maintained with temperature. However, the hydrogen bond strength changes at 1,070 K, as the O(10)···O(4) and H(1)···O(4) distances are slightly longer than those at 293 K. The anisotropic displacement parameters of the proton site are significantly larger than those at room condition. Reasons for the thermal stability of epidote up to 1,070 K observed in this study, the absence of dehydration and/or non-convergent ordering of Al and Fe³⁺ between different octahedral sites and/or convergent ordering on M(3) are discussed.     

Chromitites from the Luanga Complex,Carajás,Brazil: Stratigraphic distribution and clues to processes leading to post-magmatic alteration

The Neoarchean (ca. 2.75 Ga) Luanga Complex, located in the Carajás Mineral Province in Brazil, is a medium-size layered intrusion consisting, from base to top, of ultramafic cumulates (Ultramafic Zone), interlayered ultramafic and mafic cumulates (Transition Zone) and mafic cumulates (Mafic Zone). Chromitite layers in the Luanga Complex occur in the upper portion of interlayered harzburgite and orthopyroxenite of the Transition Zone and associated with the lowermost norites of the Mafic Zone. The stratigraphic interval that hosts chromitites (∼150 meters thick) consists of several cyclic units interpreted as the result of successive influxes of primitive parental magma. The compositions of chromite in chromitites from the Transition Zone (Lower Group Chromitites) have distinctively higher Cr# (100Cr/(Cr + Al + Fe³⁺)) compared with chromite in chromitites from the Mafic Zone (Upper Group Chromitites). Chromitites hosted by noritic rocks are preceded by a thin layer of harzburgite located 15–20 cm below each chromitite layer. Lower Cr# in chromitites hosted by noritic rocks are interpreted as the result of increased Al₂O₃ activity caused by new magma influxes. Electron microprobe analyses on line transverses through 35 chromite crystals indicate that they are rimmed and/or extensively zoned. The composition of chromite in chromitites changes abruptly in the outer rim, becoming enriched in Fe³⁺ and Fe²⁺ at the expense of Mg, Cr, Al, thus moving toward the magnetite apex on the spinel prism. This outer rim, characterized by higher reflectance, is probably related to the metamorphic replacement of the primary mineralogy of the Luanga Complex. Zoned chromite crystals indicate an extensive exchange between divalent (Mg, Fe²⁺) cations and minor to none exchange between trivalent cations (Cr³⁺, Al³⁺ and Fe³⁺). This Mg-Fe zoning is interpreted as the result of subsolidus exchange of Fe²⁺ and Mg between chromite and coexisting silicates during slow cooling of the intrusion. A remarkable feature of chromitites from Luanga Complex is the occurrence of abundant silicate inclusions within chromite crystals. These inclusions show an adjacent inner rim with higher Cr# and lower Mg# (100 Mg/(Mg + Fe²⁺)) and Al# (100Al/(Cr + Al + Fe³⁺)). This compositional shift is possibly due to crystallization from a progressively more fractionated liquid trapped in the chromite crystal. Significant modification of primary cumulus composition of chromite, as indicated in our study for the Luanga Complex, is likely to be common in non-massive chromitites and the rule for disseminated chromites in mafic intrusions.