Three-Dimensional Evolution of Flux-Rope CMEs and Its Relation to the Local Orientation of the Heliospheric Current Sheet

Flux ropes ejected from the Sun may change their geometrical orientation during their evolution, which directly affects their geoeffectiveness. Therefore, it is crucial to understand how solar flux ropes evolve in the heliosphere to improve our space-weather forecasting tools. We present a follow-up study of the concepts described by Isavnin, Vourlidas, and Kilpua (Solar Phys. 284, 203, 2013). We analyze 14 coronal mass ejections (CMEs), with clear flux-rope signatures, observed during the decay of Solar Cycle 23 and rise of Solar Cycle 24. First, we estimate initial orientations of the flux ropes at the origin using extreme-ultraviolet observations of post-eruption arcades and/or eruptive prominences. Then we reconstruct multi-viewpoint coronagraph observations of the CMEs from ≈?2 to 30 R_⊙ with a three-dimensional geometric representation of a flux rope to determine their geometrical parameters. Finally, we propagate the flux ropes from ≈?30 R_⊙ to 1 AU through MHD-simulated background solar wind while using in-situ measurements at 1 AU of the associated magnetic cloud as a constraint for the propagation technique. This methodology allows us to estimate the flux-rope orientation all the way from the Sun to 1 AU. We find that while the flux-ropes’ deflection occurs predominantly below 30 R_⊙, a significant amount of deflection and rotation happens between 30 R_⊙ and 1 AU. We compare the flux-rope orientation to the local orientation of the heliospheric current sheet (HCS). We find that slow flux ropes tend to align with the streams of slow solar wind in the inner heliosphere. During the solar-cycle minimum the slow solar-wind channel as well as the HCS usually occupy the area in the vicinity of the solar equatorial plane, which in the past led researchers to the hypothesis that flux ropes align with the HCS. Our results show that exceptions from this rule are explained by interaction with the Parker-spiraled background magnetic field, which dominates over the magnetic interaction with the HCS in the inner heliosphere at least during solar-minimum conditions.     

Comparing Simulations of Rising Flux Tubes Through the Solar Convection Zone with Observations of Solar Active Regions: Constraining the Dynamo Field Strength

We study how active-region-scale flux tubes rise buoyantly from the base of the convection zone to near the solar surface by embedding a thin flux tube model in a rotating spherical shell of solar-like turbulent convection. These toroidal flux tubes that we simulate range in magnetic field strength from 15 kG to 100 kG at initial latitudes of 1^° to 40^° in both hemispheres. This article expands upon Weber, Fan, and Miesch (Astrophys. J. 741, 11, 2011) (Article 1) with the inclusion of tubes with magnetic flux of 10²⁰ Mx and 10²¹ Mx, and more simulations of the previously investigated case of 10²² Mx, sampling more convective flows than the previous article, greatly improving statistics. Observed properties of active regions are compared to properties of the simulated emerging flux tubes, including: the tilt of active regions in accordance with Joy’s Law as in Article 1, and in addition the scatter of tilt angles about the Joy’s Law trend, the most commonly occurring tilt angle, the rotation rate of the emerging loops with respect to the surrounding plasma, and the nature of the magnetic field at the flux tube apex. We discuss how these diagnostic properties constrain the initial field strength of the active-region flux tubes at the bottom of the solar convection zone, and suggest that flux tubes of initial magnetic field strengths of ≥?40 kG are good candidates for the progenitors of large (10²¹ Mx to 10²² Mx) solar active regions, which agrees with the results from Article 1 for flux tubes of 10²² Mx. With the addition of more magnetic flux values and more simulations, we find that for all magnetic field strengths, the emerging tubes show a positive Joy’s Law trend, and that this trend does not show a statistically significant dependence on the magnetic flux.     

Solar Intranetwork Magnetic Elements: Flux Distributions

The current study aims at quantifying the flux distributions of solar intranetwork (IN) magnetic field based on the data taken in four quiet and two enhanced network areas with the Narrow-band Filter Imager of the Solar Optical Telescope on board the Hinode satellite. More than 14000 IN elements and 3000 NT elements were visually identified. They exhibit a flux distribution function with a peak at 1?–?3×10¹⁶ Mx (maxwell) and 2?–?3×10¹⁷ Mx, respectively. We found that the IN elements contribute approximately to 52 % of the total flux and an average flux density of 12.4 gauss of the quiet region at any given time. By taking the lifetime of IN elements of about 3 min (Zhou et al., Solar Phys. 267, 63, 2010) into account, the IN fields are estimated to have total contributions to the solar magnetic flux up to 3.8×10²⁶ Mx per day. No fundamental distinction can be identified in IN fields between the quiet and enhanced network areas.     

The Wave–Driver System of the Off-Disk Coronal Wave of 17 January 2010

We study the 17 January 2010 flare–CME–wave event by using STEREO/SECCHI-EUVI and -COR1 data. The observational study is combined with an analytic model that simulates the evolution of the coronal wave phenomenon associated with the event. From EUV observations, the wave signature appears to be dome shaped having a component propagating on the solar surface ( $\overline{v}\approx280~\mathrm{km}\,\mathrm{s}^{-1}$ ) as well as one off-disk ( $\overline{v}\approx 600~\mathrm{km}\,\mathrm{s}^{-1}$ ) away from the Sun. The off-disk dome of the wave consists of two enhancements in intensity, which conjointly develop and can be followed up to white-light coronagraph images. Applying an analytic model, we derive that these intensity variations belong to a wave–driver system with a weakly shocked wave, initially driven by expanding loops, which are indicative of the early evolution phase of the accompanying CME. We obtain the shock standoff distance between wave and driver from observations as well as from model results. The shock standoff distance close to the Sun (<?0.3 R _⊙ above the solar surface) is found to rapidly increase with values of ≈?0.03?–?0.09 R _⊙, which gives evidence of an initial lateral (over)expansion of the CME. The kinematical evolution of the on-disk wave could be modeled using input parameters that require a more impulsive driver (duration t=90 s, acceleration a=1.7 km?s^?2) compared to the off-disk component (duration t=340 s, acceleration a=1.5 km?s^?2).     

Three-Dimensional Evolution of Erupted Flux Ropes from the Sun (2 – 20 R ⊙) to 1 AU

Studying the evolution of magnetic clouds entrained in coronal mass ejections using in-situ data is a difficult task, since only a limited number of observational points is available at large heliocentric distances. Remote sensing observations can, however, provide important information for events close to the Sun. In this work we estimate the flux rope orientation first in the close vicinity of the Sun (2?–?20 R _⊙) using forward modeling of STEREO/SECCHI and SOHO/LASCO coronagraph images of coronal mass ejections and then in situ using Grad–Shafranov reconstruction of the magnetic cloud. Thus, we are able to measure changes in the orientation of the erupted flux ropes as they propagate from the Sun to 1 AU. We present both techniques and use them to study 15 magnetic clouds observed during the minimum following Solar Cycle 23 and the rise of Solar Cycle 24. This is the first multievent study to compare the three-dimensional parameters of CMEs from imaging and in-situ reconstructions. The results of our analysis confirm earlier studies showing that the flux ropes tend to deflect towards the solar equatorial plane. We also find evidence of rotation on their travel from the Sun to 1 AU. In contrast to past studies, our method allows one to deduce the evolution of the three-dimensional orientation of individual flux ropes rather than on a statistical basis.     

3D Evolution of a Filament Disappearance Event Observed by STEREO

A filament disappearance event was observed on 22 May 2008 during our recent campaign JOP 178. The filament, situated in the Southern Hemisphere, showed sinistral chirality consistent with the hemispheric rule. The event was well observed by several observatories, in particular by THEMIS. One day, before the disappearance, Hα observations showed up- and down-flows in adjacent locations along the filament, which suggest plasma motions along twisted flux rope. THEMIS and GONG observations show shearing photospheric motions leading to magnetic flux canceling around barbs. STEREO A, B spacecraft with separation angle 52.4°, showed quite different views of this untwisting flux rope in He ii 304 Å images. Here, we reconstruct the three-dimensional geometry of the filament during its eruption phase using STEREO EUV He ii 304 Å images and find that the filament was highly inclined to the solar normal. The He ii 304 Å movies show individual threads, which oscillate and rise to an altitude of about 120 Mm with apparent velocities of about 100 km?s^?1 during the rapid evolution phase. Finally, as the flux rope expands into the corona, the filament disappears by becoming optically thin to undetectable levels. No CME was detected by STEREO, only a faint CME was recorded by LASCO at the beginning of the disappearance phase at 02:00 UT, which could be due to partial filament eruption. Further, STEREO Fe xii 195 Å images showed bright loops beneath the filament prior to the disappearance phase, suggesting magnetic reconnection below the flux rope.     

A Major Geoeffective CME from NOAA 12371: Initiation,CME–CME Interactions,and Interplanetary Consequences

In this article, we present a multi-wavelength and multi-instrument investigation of a halo coronal mass ejection (CME) from active region NOAA 12371 on 21 June 2015 that led to a major geomagnetic storm of minimum \(\mathrm{Dst} = -204\) nT. The observations from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory in the hot EUV channel of 94 Å confirm the CME to be associated with a coronal sigmoid that displayed an intense emission (\(T \sim6\) MK) from its core before the onset of the eruption. Multi-wavelength observations of the source active region suggest tether-cutting reconnection to be the primary triggering mechanism of the flux rope eruption. Interestingly, the flux rope eruption exhibited a two-phase evolution during which the “standard” large-scale flare reconnection process originated two composite M-class flares. The eruption of the flux rope is followed by the coronagraphic observation of a fast, halo CME with linear projected speed of 1366 km?s^?1. The dynamic radio spectrum in the decameter-hectometer frequency range reveals multiple continuum-like enhancements in type II radio emission which imply the interaction of the CME with other preceding slow speed CMEs in the corona within \(\approx10\)?–?\(90~\mbox{R} _{\odot}\). The scenario of CME–CME interaction in the corona and interplanetary medium is further confirmed by the height–time plots of the CMEs occurring during 19?–?21 June. In situ measurements of solar wind magnetic field and plasma parameters at 1 AU exhibit two distinct magnetic clouds, separated by a magnetic hole. Synthesis of near-Sun observations, interplanetary radio emissions, and in situ measurements at 1 AU reveal complex processes of CME–CME interactions right from the source active region to the corona and interplanetary medium that have played a crucial role towards the large enhancement of the geoeffectiveness of the halo CME on 21 June 2015.     

Joint Measurements of Flare Flux Densities at 210 – 212 GHz by Two Different Radio Telescopes

Multiple-beam observations of solar flares at submillimeter wavelengths need detection with at least four beams to derive the flux density $\mbox{$F$} $ of the emitting source, its size, and centroid position. When this condition is not fulfilled, the assumptions on the location and/or size of the emitting source have to be made in order to compute $\mbox{$F$}$ . Otherwise, only a flux density range $\mbox{$\Delta F$}$ can be estimated. We report on simultaneous flare observations at 212 and 210 GHz obtained by the Solar Submillimeter Telescope (SST) and the Bernese Multibeam Radiometer for Kosma (BEMRAK), respectively, during two solar events on 28 October 2003. For both events, BEMRAK utilized four beam information to calculate the source flux density F ₂₁₀, its size and position. On the other hand, the SST observed the events with only one beam, at low solar elevation angles and during high atmospheric attenuation. Therefore, because of these poor observing conditions at 212 GHz, only a flux density range ΔF ₂₁₂ could be estimated. The results show that ΔF ₂₁₂ is within a factor of 2.5 of the flux density F ₂₁₀. This factor can be significantly reduced (e.g. 1.4 for one of the studied events) by an appropriate choice of the 212 GHz source position using flare observations at other wavelengths. By adopting the position and size of the 210 GHz source measured by BEMRAK, the flux density at 212 GHz, F _212b, is comparable to F ₂₁₀ within the uncertainties, as expected. Therefore our findings indicate that even during poor observing conditions, the SST can provide an acceptable estimate of the flux density at 212 GHz. This is a remarkable fact since the SST and BEMRAK use quite different procedures for calibration and flux density determination. We also show that the necessary assumptions made on the size of the emitting source at 212 GHz in order to estimate its flux density are not critical, and therefore do not affect the conclusions of previous studies at this frequency.     

Subsurface Meridional Flow from HMI Using the Ring-Diagram Pipeline

We have determined the meridional flows in subsurface layers for 18 Carrington rotations (CR 2097 to 2114) analyzing high-resolution Dopplergrams obtained with the Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO). We are especially interested in flows at high latitudes up to 75^° in order to address the question whether the meridional flow remains poleward or reverses direction (so-called counter cells). The flows have been determined in depth from near-surface layers to about 16 Mm using the HMI ring-diagram pipeline. The measured meridional flows show systematic effects, such as a variation with the B ₀-angle and a variation with central meridian distance (CMD). These variations have been taken into account to lead to more reliable flow estimates at high latitudes. The corrected average meridional flow is poleward at most depths and latitudes with a maximum amplitude of about $20~\mathrm{m\,s}^{-1}$ near 37.5^° latitude. The flows are more poleward on the equatorward side of the mean latitude of magnetic activity at 22^° and less poleward on the poleward side, which can be interpreted as convergent flows near the mean latitude of activity. The corrected meridional flow is poleward at all depths within ±?67.5^° latitude. The corrected flow is equatorward only at 75^° latitude in the southern hemisphere at depths between about 4 and 8 Mm and at 75^° latitude in the northern hemisphere only when the B ₀ angle is barely large enough to measure flows at this latitude. These counter cells are most likely the remains of an insufficiently corrected B ₀-angle variation and not of solar origin. Flow measurements and B ₀-angle corrections are difficult at the highest latitude because these flows are only determined during limited periods when the B ₀ angle is sufficiently large.     

Bimodal Distribution of Magnetic Fields and Areas of Sunspots

We applied automatic identification of sunspot umbrae and penumbrae to daily observations from the Helioseismic Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) to study their magnetic flux density (B) and area (A). The results confirm an already known logarithmic relationship between the area of sunspots and their maximum flux density. In addition, we find that the relation between average magnetic flux density ( $B_{\rm avg}$ ) and sunspot area shows a bimodal distribution: for small sunspots and pores (A≤20 millionth of solar hemisphere, MSH), $B_{\rm avg} \approx 800~\mbox{G}$ (gauss), and for large sunspots (A≥100 MSH), $B_{\rm avg}$ is about 600 G. For intermediate sunspots, average flux density linearly decreases from about 800 G to 600 G. A similar bimodal distribution was found in several other integral parameters of sunspots. We show that this bimodality can be related to different stages of sunspot penumbra formation and can be explained by the difference in average inclination of magnetic fields at the periphery of small and large sunspots.     

Are There Different Populations of Flux Ropes in the Solar Wind?

Flux ropes are twisted magnetic structures that can be detected by in-situ measurements in the solar wind. However, different properties of detected flux ropes suggest different types of flux-rope populations. As such, are there different populations of flux ropes? The answer is positive and is the result of the analysis of four lists of flux ropes, including magnetic clouds (MCs), observed at 1 AU. The in-situ data for the four lists were fitted with the same cylindrical force-free field model, which provides an estimate of the local flux-rope parameters such as its radius and orientation. Since the flux-rope distributions have a broad dynamic range, we went beyond a simple histogram analysis by developing a partition technique that uniformly distributes the statistical fluctuations across the radius range. By doing so, we found that small flux ropes with radius R<0.1 AU have a steep power-law distribution in contrast to the larger flux ropes (identified as MCs), which have a Gaussian-like distribution. Next, from four CME catalogs, we estimated the expected flux-rope frequency per year at 1 AU. We found that the predicted numbers are similar to the frequencies of MCs observed in-situ. However, we also found that small flux ropes are at least ten times too abundant to correspond to CMEs, even to narrow ones. Investigating the different possible scenarios for the origin of these small flux ropes, we conclude that these twisted structures can be formed by blowout jets in the low corona or in coronal streamers.     

Stability of the Triangular Points Under Combined Effects of Radiation and Oblateness in the Restricted Three-Body Problem

This paper deals with the existence of triangular points and their linear stability when the primaries are oblate spheroid and sources of radiation considering the effect of oblateness up to 10^?6 of main terms in the restricted three-body problem; we see that the locations of the triangular points are affected by the oblateness of the primaries and solar radiation pressure. It is further seen that these points are stable for 0 ≤ μ ≤μ _c ; and unstable for μ _c  ≤ μ ≤1/2; where μ _c is the critical mass value depending on terms which involve parameters that characterize the oblateness and radiation repulsive forces such that $ \mu_{c} \in (0,1/2) $ ; in addition to this an algorithm has been constructed to calculate the critical mass value.     

The Horizontal Component of Photospheric Plasma Flows During the Emergence of Active Regions on the Sun

The dynamics of horizontal plasma flows during the first hours of the emergence of active region magnetic flux in the solar photosphere have been analyzed using SOHO/MDI data. Four active regions emerging near the solar limb have been considered. It has been found that extended regions of Doppler velocities with different signs are formed in the first hours of the magnetic flux emergence in the horizontal velocity field. The flows observed are directly connected with the emerging magnetic flux; they form at the beginning of the emergence of active regions and are present for a few hours. The Doppler velocities of flows observed increase gradually and reach their peak values 4?–?12 hours after the start of the magnetic flux emergence. The peak values of the mean (inside the ±?500 m?s^?1 isolines) and maximum Doppler velocities are 800?–?970 m?s^?1 and 1410?–?1700 m?s^?1, respectively. The Doppler velocities observed substantially exceed the separation velocities of the photospheric magnetic flux outer boundaries. The asymmetry was detected between velocity structures of leading and following polarities. Doppler velocity structures located in a region of leading magnetic polarity are more powerful and exist longer than those in regions of following polarity. The Doppler velocity asymmetry between the velocity structures of opposite sign reaches its peak values soon after the emergence begins and then gradually drops within 7?–?12 hours. The peak values of asymmetry for the mean and maximal Doppler velocities reach 240?–?460 m?s^?1 and 710?–?940 m?s^?1, respectively. An interpretation of the observable flow of photospheric plasma is given.     

Coronal Hole Influence on the Observed Structure of Interplanetary CMEs

We report on the coronal hole (CH) influence on the 54 magnetic cloud (MC) and non-MC associated coronal mass ejections (CMEs) selected for studies during the Coordinated Data Analysis Workshops (CDAWs) focusing on the question if all CMEs are flux ropes. All selected CMEs originated from source regions located between longitudes 15E?–?15W. Xie, Gopalswamy, and St. Cyr (2013, Solar Phys., doi: 10.1007/s11207-012-0209-0 ) found that these MC and non-MC associated CMEs are on average deflected towards and away from the Sun–Earth line, respectively. We used a CH influence parameter (CHIP) that depends on the CH area, average magnetic field strength, and distance from the CME source region to describe the influence of all on-disk CHs on the erupting CME. We found that for CHIP values larger than 2.6 G the MC and non-MC events separate into two distinct groups where MCs (non-MCs) are deflected towards (away) from the disk center. Division into two groups was also observed when the distance to the nearest CH was less than 3.2×10⁵ km. At CHIP values less than 2.6 G or at distances of the nearest CH larger than 3.2×10⁵ km the deflection distributions of the MC and non-MCs started to overlap, indicating diminishing CH influence. These results give support to the idea that all CMEs are flux ropes, but those observed to be non-MCs at 1 AU could be deflected away from the Sun–Earth line by nearby CHs, making their flux rope structure unobservable at 1 AU.     

On the Origin of Pulsations of Sub-THz Emission from Solar Flares

We propose a model to explain fast pulsations in sub-THz emission from solar flares. The model is based on the approach of a flaring loop as an equivalent electric circuit and explains the pulse-repetition rate, the high-quality factor, Q≥10³, low modulation depth, pulse synchronism at different frequencies, and the dependence of the pulse-repetition rate on the emission flux, observed by Kaufmann et al. (Astrophys. J. 697, 420, 2009). We solved the nonlinear equation for electric current oscillations using a Van der Pol method and found the steady-state value for the amplitude of the current oscillations. Using the pulse rate variation during the flare on 4 November 2003, we found a decrease of the electric current from 1.7×10¹² A in the flare maximum to 4×10¹⁰ A just after the burst. Our model is consistent with the plasma mechanism of sub-THz emission suggested recently by Zaitsev, Stepanov, and Melnikov (Astron. Lett. 39, 650, 2013).     

Investigation of the Coronal Magnetic Field Using a Type II Solar Radio Burst

The type II solar radio burst recorded on 13 June 2010 by the Hiraiso Solar Observatory Radio Spectrograph was employed to estimate the magnetic-field strength in the solar corona. The burst was characterized by a well-pronounced band splitting, which we used to estimate the density jump at the shock and Alfvén Mach number using the Rankine–Hugoniot relation. We convert the plasma frequency of the type II burst into height [R] in solar radii using an appropriate density model, and then we estimated the shock speed [V _s], coronal Alfvén velocity [V _A], and the magnetic-field strength at different heights. The relative bandwidth of the band splitting was found to be in the range 0.2?–?0.25, corresponding to a density jump of X=1.44?–?1.56, and an Alfvén Mach number of M _A=1.35?–?1.45. The inferred mean shock speed was on the order of V≈667 km?s^?1. From the dependencies V(R) and M _A(R) we found that the Alfvén speed slightly decreases at R≈1.3?–?1.5 R_⊙. The magnetic-field strength decreases from a value between 2.7 and 1.7 G at R≈1.3?–?1.5 R_⊙, depending on the coronal-density model employed. Our results are in good agreement with the empirical scaling by Dulk and McLean (Solar Phys. 57, 279, 1978) and Gopalswamy et al. (Astrophys. J. 744, 72, 2012). Our results show that the type II band-splitting method is an important tool for inferring the coronal magnetic field, especially when independent measurements are made from white-light observations.     

Stability of ion-acoustic waves in a pair-ion plasma with a third species of ions: application to cometary plasmas

A popular model of a cometary plasma is hydrogen (H⁺) with positively charged oxygen (O⁺) as a heavier ion component. However, the discovery of negatively charged oxygen (O^?) ions enables one to model a cometary plasma as a pair-ion plasma (of O⁺ and O^?) with hydrogen as a third ion constituent. We have, therefore, studied the stability of the ion-acoustic wave in such a pair-ion plasma with hydrogen and electrons streaming with velocities $V_{d\mathrm{H}^{+}}$ and V _de , respectively, relative to the oxygen ions. We find the calculated frequency of the ion-acoustic wave with this model to be in good agreement with the observed frequencies. The ion-acoustic wave can also be driven unstable by the streaming velocity of the hydrogen ions. The growth rate increases with increasing hydrogen density $n_{\mathrm{H}^{+}}$ , and streaming velocities $V_{d\mathrm{H}^{+}}$ and V _de . It, however, decreases with increasing oxygen ion densities $n_{\mathrm{O}^{+}}$ and $n_{\mathrm{O}^{-}}$ .     

Forecasting the intensity of solar proton events from the time characteristics of solar microwave bursts

A survey of the main characteristics of solar microwave bursts in relation to their usefulness for indicating the intensity of associated solar proton emissions suggests that time parameters give much better results than intensity or spectrum parameters. In particular, best results are obtained by using the effective, or mean, burst duration defined by $$T_M = 1/P_{max} \int_0^T {P(t)dt} $$ where T is the overall burst duration, P is the power density at time T, and P _max is the maximum power density. For proton energies > 10 MeV the proton flux N _p is given approximately by N _p = 0.034 T _M ³ particles ster^?1 cm^?2 s^?1, where T _m is in minutes, with a correlation factor of 0.8. Corresponding coefficients have been derived for a number of energy ranges. Using this parameter solar proton warnings and intensity estimates can be made with observations at only one frequency, preferably in the range 5–20 GHz.     

On Thermal-Pulse-Driven Plasma Flows in Coronal Funnels as Observed by the Hinode/EUV Imaging Spectrometer (EIS)

Using one-arcsecond-slit-scan observations from the Hinode/EUV Imaging Spectrometer (EIS) on 5 February 2007, we find the plasma outflows in the open and expanding coronal funnels at the eastern boundary of AR 10940. The Doppler-velocity map of Fe?xii 195.120 Å shows the diffuse closed-loop system to be mostly red-shifted. The open arches (funnels) at the eastern boundary of AR exhibit blue-shifts with a maximum speed of about 10?–?15 km?s^?1. This implies outflowing plasma through these magnetic structures. In support of these observations, we perform a 2D numerical simulation of the expanding coronal funnels by solving the set of ideal MHD equations in appropriate VAL-III C initial temperature conditions using the FLASH code. We implement a rarefied and hotter region at the footpoint of the model funnel, which results in the evolution of slow plasma perturbations propagating outward in the form of plasma flows. We conclude that the heating, which may result from magnetic reconnection, can trigger the observed plasma outflows in such coronal funnels. This can transport mass into the higher corona, giving rise to the formation of the nascent solar wind.     

Observational Evidence for a Double-Helix Structure in CMEs and Magnetic Clouds

We compare recent observations of a solar eruptive prominence as seen in extreme-UV light on 30 March 2010 by the Solar Dynamics Observatory (SDO) with the multi-tube model for interplanetary magnetic clouds (Osherovich, Fainberg, Stone, Geophys. Res. Lett. 26, 2597, 1999). Our model is based on an exact analytical solution of the plasma equilibrium with magnetic force balanced by a gradient of scalar gas pressure. Topologically, this solution describes two magnetic helices with opposite magnetic polarity embedded in a cylindrical magnetic flux tube that creates magnetic flux inequality between the two helices by enhancing one helix and suppressing the other. The magnetic field in this model is continuous everywhere and has a finite magnetic energy per unit length of the tube. These configurations have been introduced as MHD bounded states (Osherovich, Soln. Dannye 5, 70, 1975). Apparently, the SDO observations depict two non-equal magnetically interacting helices described by this analytical model. We consider magnetic and thermodynamic signatures of multiple magnetic flux ropes inside the same magnetic cloud, using in situ observations. The ratio of magnetic energy density to bulk speed solar wind energy density has been defined as a solar wind quasi-invariant (QI). We analyze the structure of the QI profile to probe the topology of the internal structure of magnetic clouds. From the superposition of 12 magnetically isolated clouds observed by Ulysses, we have found that the corresponding QI is consistent with our double helix model.