The pollution of marine sediments by trace elements in the coastal region of Togo caused by dumping of cadmium-rich phosphorite tailing into the sea

 The marine coastal sediments from Togo have been analysed for the trace elements Cd, Cr, Cu, Ni, Pb, Sr, V, Zn and Zr to ascertain the geo-ecological impact of dumping of phosphorite tailings into the sea. Trace element concentrations ranged from 2–44 ppm for Cd, 22–184 ppm for Cu, 19–281 ppm for Ni, 22–176 ppm for Pb, 179–643 ppm for Sr, 38–329 ppm for V, 60–632 ppm for Zn and 18–8928 ppm for Zr. Regional distribution of trace elements in the marine environment indicates that the concentrations of Cr, Cu, Ni, Pb, V, Sr and Zn increase seawards and along the coastal line outwards of the tailing outfall, whereas Cd and Zr showed reversed spatial patterns. Sorting and transport of phosphorite particles by coastal currents are the main factors controlling the distribution of particle-bound trace metals in the coastal environment. The Cd, Sr and Zn concentrations decrease with decreasing grain size in marine coastal sediments, whereas Cr, Cu, Ni and Zn concentrations increase with decreasing grain size. Percolation and shaking experiments were carried out in laboratory using raw phosphate material and artificial sea water. Enhanced mobilization of Cd from phosphorites by contact with the sea water was observed. Received: 11 May 1998 · Accepted: 20 October 1998     

Heavy metals in sediments of a large, turbid tropical lake affected by anthropogenic discharges

 Bottom-water data and trace metal concentration of Cu, Cr, Ni, Pb, Co, Zn, and organic matter in surficial sediment samples from 13 sampling stations of Lake Chapala in Mexico were studied. The lake is turbid with a great amount of flocculated sediments as a result of wind mixing, sediment re-suspension, and Lerma River discharges. Al distribution pattern in sediments was used as an indicator of the Lerma River discharges into Lake Chapala. The highest values of Cu (33.27 ppm), Cr (81.94 ppm), Pb (99.8 ppm), and Zn (149.7 ppm) were detected in sediments near the lake outlet. The bioavailable metal fraction is low for all metals except Pb, which shows 65–93% of the total metal concentration in bioavailable form. The minimum energy zone in the lake was related to organic matter concentration and was located in the SE part of the lake. An analysis of the studied parameters shows two zones: eastern zone (fluvio-deltaic) and central-western zone (lacustrine). Received: 9 September 1998 · Accepted: 16 November 1998     

Environmental geochemistry of Damodar River basin, east coast of India

 Water and bed sediment samples collected from the Damodar River and its tributaries were analysed to study elemental chemistry and suspended load characteristics of the river basin. Na and Ca are the dominant cations and HCO₃ is the dominant anion. The water chemistry of the Damodar River basin strongly reflects the dominance of continental weathering aided by atmospheric and anthropogenic activities in the catchment area. High concentrations of SO₄ and PO₄ at some sites indicate the mining and anthropogenic impact on water quality. The high concentration of dissolved silica, relatively high (Na+K)/TZ⁺ ratio (0.2–0.4) and low equivalent ratio of (Ca+Mg)/(Na+K) indicate that dissolved ions contribute significantly to the weathering of aluminosilicate minerals of crystalline rocks. The seasonal data show a minimum ionic concentration in the monsoon season, reflecting the influence of atmospheric precipitation on total dissolved solids contents. The suspended sediments show a positive correlation with discharge and both discharge and suspended load reach their maximum value during the monsoon season. Kaolinite is the mineral that is possibly in equilibrium with the water. This implies that the chemistry of the Damodar River water favours kaolinite formation. The concentration of heavy metals in the finer size fraction (<37 μ m) is significantly higher than the bulk composition. The geoaccumulation index values calculated for Fe, Mn, Zn, Ni and Cr are well below zero, suggesting that there is no pollution from these metals in Damodar River sediments. Received: 21 January 1998 · Accepted: 4 May 1998     

A contemporary contamination record of stormdrain and harbour sediments, Wellington, New Zealand

 Sediments from stormdrain catchments and outlets in Wellington city and sediment traps from Wellington Harbour were sampled for trace metal content. Samples were analysed for total metal content using XRF and ICP-MS. High values of Pb and Zn were found in stormdrain catchments and outlets, decreasing to elevated background rock levels in the harbour. Maximum values were recorded in an inner city stormdrain catchment, with levels of Pb (4605 ppm), Cu (2981 ppm) and Zn (3572 ppm) all higher than the biological probable effects levels (PEL). Concentrations of As, Cr, Cu, Pb, Ni and Zn concentrations in all harbour sediment trap samples were below the PEL. The mean values for each harbour sediment trap sample can be used as an accurate historical baseline in future studies. Stormdrain samples with high trace metal levels were close to industrial and construction sites. The proximity of these outlets to recreational areas should be of concern to local authorities. Received: 28 August 1997 · Accepted: 15 December 1997     

Source and distribution of trace metals and nutrients in Narmada and Tapti river basins,India

The study was designed to establish the distributions of trace metals, dissolved organic carbon, and inorganic nutrients as well as to assess the extent of anthropogenic inputs into the Narmada and Tapti rivers. Water and sediment qualities are variable in the rivers, and there are major pollution problems at certain locations, mainly associated with urban and industrial centers. The metal concentrations of samples of the aquatic compartments investigated were close to the maximum permissible concentration for the survival of aquatic life, except for higher values of Cu (5–763 μg l⁻¹), Pb (24–376 μg l⁻¹), Zn (24–730 μg l⁻¹), and Cr (70–740 μg l⁻¹) and for drinking water except for elevated concentrations of metals such as Pb, Fe (850–2,060 μg l⁻¹), Cr, and Ni (20–120 μg l⁻¹). In general, the concentrations of trace metals in the rivers vary down stream which may affect the “health” of the aquatic ecosystem and may also affect the health of the rural community that depends on the untreated river water directly for domestic use. The assessment of EF, I _geo, and PLI in the sediments reveals overall moderate pollution in the river basins.     

Heavy metal pollution in freshly deposited sediments of the Yamuna River (the Ganges River tributary): a case study from Delhi and Agra urban centres, India

 The Yamuna River sediments, collected from Delhi and Agra urban centres, were analysed for concentration and distribution of nine heavy metals by means of atomic adsorption spectrometry. Total metal contents varied in the following ranges (in mg/kg): Cr (157–817), Mn (515–1015), Fe (28,700–45,300), Co(11.7–28.4), Ni (40–538), Cu (40–1204), Zn (107–1974), Pb (22–856) and Cd (0.50–114.8). The degree of metal enrichment was compared with the average shale concentration and shows exceptionally high values for Cr, Ni, Cu, Zn, Pb and Cd in both urban centres. In the total heavy metal concentration, anthropogenic input contains 70% Cr, 74% Cu, 59% Zn, 46% Pb, 90% Cd in Delhi and 61% Cr, 23% Ni, 71% Cu, 72% Zn, 63% Pb, 94% Cd in Agra. A significant correlation was observed between increasing Cr, Ni, Zn, and Cu concentrations with increasing total sediment carbon and total sediment sulfur content. Based on the Müller's geoaccumulation index, the quality of the river sediments can be regarded as being moderately polluted to very highly polluted with Cr, Ni, Cu, Zn, Pb and Cd in the Delhi and Agra urban centres. The present sediment analysis, therefore, plays an important role in environmental measures for the Yamuna River and the planning of these city centres. Received: 21 June 1999 · Accepted: 1 October 1999     

Archean high-Mg monzodiorite–syenite,epidote skarn,and biotite–sericite gold lodes in the Granny Smith–Wallaby district,Australia: U–Pb and Re–Os chronometry of two intrusion-related hydrothermal systems

The Granny Smith (37 t Au production) and Wallaby deposits (38 t out of a 180 t Au resource) are located northeast of Kalgoorlie, in 2.7 Ga greenstones of the Eastern Goldfields Province, the youngest orogenic belt of the Yilgarn craton, Western Australia. At Granny Smith, a zoned monzodiorite–granodiorite stock, dated by a concordant titanite–zircon U–Pb age of 2,665 ± 3 Ma, cuts across east-dipping thrust faults. The stock is fractured but not displaced and sets a minimum age for large-scale (1 km) thrust faulting (D2), regional folding (D1), and dynamothermal metamorphism in the mining district. The local gold–pyrite mineralization, controlled by fractured fault zones, is younger than 2,665 ± 3 Ma. In augite–hornblende monzodiorite, alteration progressed from a hematite-stained alkali feldspar–quartz–calcite assemblage and quartz–molybdenite–pyrite veins to a late reduced sericite–dolomite–albite assemblage. Gold-related monazite and xenotime define a U–Pb age of 2,660 ± 5 Ma, and molybdenite from veins a Re–Os isochron age of 2,661 ± 6 Ma, indicating that mineralization took place shortly after the emplacement of the main stock, perhaps coincident with the intrusion of late alkali granite dikes. At Wallaby, a NE-trending swarm of porphyry dikes comprising augite monzonite, monzodiorite, and minor kersantite intrudes folded and thrust-faulted molasse. The conglomerate and the dikes are overprinted by barren (<0.01 g/t Au) anhydrite-bearing epidote–actinolite–calcite skarn, forming a 600-m-wide and >1,600-m-long replacement pipe, which is intruded by a younger ring dike of syenite porphyry pervasively altered to muscovite + calcite + pyrite. Skarn and syenite are cut by pink biotite–calcite veins, containing magnetite + pyrite and subeconomic gold–silver mineralization (Au/Ag = 0.2). The veins are associated with red biotite–sericite–calcite–albite alteration in adjacent monzonite dikes. Structural relations and the concordant titanite U–Pb age of the skarn constrain intrusion-related mineralization to 2,662 ± 3 Ma. The main-stage gold–pyrite ore (Au/Ag >10) forms hematite-stained sericite–dolomite–albite lodes in stacked D2 reverse faults, which offset skarn, syenite, and the biotite–calcite veins by up to 25 m. The molybdenite Re–Os age (2,661 ± 10 Ma) of the ore suggests a genetic link to intrusive activity but is in apparent conflict with a monazite–xenotime U–Pb age (2,651 ± 6 Ma), which differs from that of the skarn at the 95% confidence level. The time relationships at both gold deposits are inconsistent with orogenic models invoking a principal role for metamorphic fluids released during the main phase of compression in the fold belt. Instead, mineralization is related in space and time to late-orogenic, magnetite-series, high-Mg monzodiorite–syenite intrusions of mantle origin, characterized by Mg/(Mg + Fe_TOTAL) = 0.31–0.57, high Cr (34–96 ppm), Ni (22–63 ppm), Ba (1,056–2,321 ppm), Sr (1,268–2,457 ppm), Th (15–36 ppm), and rare earth elements (total REE: 343–523 ppm). At Wallaby, shared Ca–K–CO₂ metasomatism and Th-REE enrichment (in allanite) link Au–Ag mineralization in biotite–calcite veins to the formation of the giant epidote skarn, implicating a Th + REE-rich syenite pluton at depth as the source of the oxidized hydrothermal fluid. At Granny Smith, lead isotope data and the Rb–Th–U signature of early hematite-bearing wall-rock alteration point to fluid released by the source pluton of the differentiated alkali granite dikes.     

A metallogenic survey of alkalic rocks of Mt. Somma-Vesuvius volcano

Summary Somma-Vesuvius is an alkaline volcano whose products (pumice, scoria and lava) have alkaline (Na₂O + K₂O) contents between 6 and 16 wt%, Mg number <50, SiO₂ 59–47 wt% and MgO 0–7.8 wt% (more than 50% of the samples have a content <2 wt%). Immobile-element ratios (Th/Yb, Ta/Yb, Ce/Yb) indicate a shoshonitic character, while the K₂O content (4–10 wt%) is characteristic of ultrapotassic rocks. The behavior of selected metals is discussed by grouping them on the basis of the stratigraphic sequence and differentiating the volcanic activity between plinian and interplinian (Rolandi et al., 1998; Ayuso et al., 1998). This allows observation of the variation within each formation from 25.000 y. BP to the last historic eruptive cycle (1631–1944 AD). The main processes to explain the wide distribution of the data presented are fractional crystallization of a mantle-derived magma, magma mixing, and contamination with heterogeneous lower and/or upper crust. Variation diagrams distinguish different behavior for groups of metals: Ag (0.01–0.2 ppm), Mo (1–8.8 ppm), W (1.3–13 ppm), Pb (16–250 ppm), Sb (0.2–2.6 ppm), Sc (0.2–61 ppm), Li (15–140 ppm) and Be (1–31 ppm) increase with increasing differentiation and tend to correlate with the incompatible trace elements (Th, Hf, etc). Cu (10–380 ppm), Au (2–143 ppb), Co (0.7–35.1 ppm) and Fe (1.3–6.2 wt%) decrease towards advanced stage of differentiation. Iron also identifies three magmatic groups. The ratio Fe³⁺/Fe²⁺ ranges between 0.2 and 1.8, and Fe₂O₃/(Fe₂O₃ + FeO) ranges between 0.2 and 0.8, giving rise to an oxidized environment; exceptions are in the samples belonging to the interplinian formations: I, II, medieval and 1631–1994 AD. Fluorine ranges between 0.1 and 0.4 wt% for the complete Mt. Somma-Vesuvius activity, except for the Ottaviano and Avellino plinian (0.8 wt%) events. Chlorine has a wider range, from 0.1 wt% to 1.6 wt%. Mt Somma-Vesuvius has some features similar to those of mineralized alkaline magmatic systems which coincide with the transition between subduction-related compression and extension-related to continental rifting. We infer that a prospective time for the formation of mineralization at Mt Somma-Vesuvius was during the 1631–1944 eruptive period. Received March 27, 2000; revised version accepted February 28, 2001     

Remediation of heavy metal-contaminated sediments by solid-bed bioleaching

 Weisse Elster River sediment from the Leipzig Lowlands region (Saxony, Germany) is anthropogenically polluted by heavy metals. Sediment dredged from a trap to the south of Leipzig was characterized in detail. When freshly dredged sediment contacts air, the material turns acidic because of oxidation processes, the heavy metals become soluble and the sediment poses an environmental risk. We are therefore developing a sediment-treatment process based on heavy metal removal by bioleaching. Leaching experiments were carried out in suspension and in the solid bed. The heavy metals were solubilized to nearly the same extent by H₂SO₄ dosage (pure chemical extraction) and addition of elemental sulphur (microbial oxidation of S⁰ to H₂SO₄). With increasing dosage of the leaching agent, Zn, Cd, Ni, Cu and Cr were more and more solubilized, whereas Pb was only dissolved in small amounts. The addition of 2% S⁰ is considered an optimum dosage. When 5% S⁰ was added to the sediment, the pH dropped to 1.76 and large amounts of undesirable compounds such as Ca, Al and Fe were solubilized. The higher the temperature, the faster the metals were solubilized in both suspension and the solid bed. The temperature optimum for activating the indigenous S⁰-oxidizing microbes of the sediment lies between 30 and 40  °C. Conditioning of freshly dredged sediment with plants makes it suitable for solid-bed leaching; the kinetics of heavy metal solubilization from sediment conditioned for 6 months with Phragmites australis was the same as from long-term stored sediment. Received: 26 November 1999 · Accepted: 5 May 2000     

The Svalbard western coast: site of baseline geochemistry and incipient contamination

 Potentially toxic metals tracked by the Arctic Monitoring and Assessment Program were analysed in sediments from the Svalbard western coastal zone. These include As and Hg found as contaminants in other Arctic seas as well as other elements (e.g. Pb, V, Cu, Zn, Cr, Ni). Svalbard shelf sediments contain average values of 12 ppm As, 12 ppm Pb, 56 ppb Hg and 114 ppm V. These values increase in Isfjorden sediments to 15 ppm As, 28 ppm Pb, 99 ppb Hg and 210 ppm V. Cluster analysis yields a major cluster that is likely related to clay minerals (Al, K, Ti, Mg) and sorption onto them of transition (Cu, V, Cr, Sc) and other elements (Pb, Rb). A second significant cluster includes Ca, Sr and plagioclase. The Svalbard western shelf is a natural geochemical environment. The possible incipient contamination of fjord sediments by As, Pb, Hg and V should be evaluated for possible links to anthropogenic sources. If links are found, remediation must be used to stop the input and preserve a pristine Svalbard fjord environment. Received: 21 December 1998 · Accepted: 15 March 1999     

Geochemistry of sulphate-bearing water of Akra Kaur Dam,Gwadar, Balochistan,Pakistan and its assessment for drinking and irrigation purposes

This paper is an attempt to study the geochemistry of Akra Kaur Dam (AKD) water, north of Gwadar city, southern Balochistan. Representative water samples were collected from AKD reservoir to assess the suitability of water for drinking and agriculture purposes. The major ionic composition is suggestive for freshwater. The average ionic composition demonstrate SO₄ > Ca > Na > Cl > HCO₃ > Mg > K. The plots on Piper diagram reflected Ca–Mg–SO₄ type of water facies. High Ca/SO₄ and Ca/Mg ratios revealed that the water has influence of gypsum dissolution. The negative ratio of chloro-alkaline indices indicated reverse exchange between Ca and Mg in water occurred with Na and K in rocks. The pH, electrical conductivity, total dissolved salts, Ca, Mg, Na, K, HCO₃, Cl and SO₄ concentrations in the dam water were below the permissible limit, however, Na and SO₄ were above the desirable limit, set by the World Health Organization. Important parameters such as residue sodium carbonate, sodium percent, sodium adsorption ratio, permeability index, magnesium content and Kelley’s ratio were calculated to evaluate the suitability of water for irrigation purpose. The result were compared with standard permissible limits and found satisfactory. The health and agriculture hazards of sulphate-bearing water were also discussed.     

A comparison of geochemical information obtained from two fluvial bed sediment fractions

 A total of 121 bed sediment samples were collected from a 5.8-km stretch of Manoa Stream, Hawaii. Samples were physically partitioned into two grain-size fractions, <63 μm and 63–125 μm, acid digested and analyzed by ICP-AES and FAAS. Non-parametric matched-pair statistical testing and correlation analysis were used to assess differences and strengths of association between the two fractions for Al, Ba, Cu, Fe, Mn, Ni, Pb, Ti and Zn. Results indicated statistically significant differences between fractions for all elements except Mn. Concentrations were significantly greater in the <63 μm fraction for Al, Cu, Pb, Ti and Zn, while Ba, Fe and Ni were higher in the 63–125 μm fraction. Though some elements had statistically significant differences between fractions (Al, Ba, Fe and Zn) percentage differences were in the range of analytical precision of the instrument and thus differences were not practically significant. Correlation analysis indicated strong positive associations for all elements between the two fractions (p<0.0001). Three contamination indices indicated similar degrees of pollution for each size fraction for four elements having an anthropogenic signal (Ba, Cu, Pb and Zn). The environmental information obtained from the 63–125 μm fraction was essentially equivalent to that from the <63 μm fraction. In this system it is clear that both bed sediment fractions indicate anthropogenic enrichment of trace metals, especially Pb, and further supports previous research that has found that aquatic sediments are critical median for tracing sources of pollution. Received: 17 August 1998 · Accepted: 30 October 1998     

An assessment study of heavy metal distribution within soil in upper course of Zarqa River basin/Jordan

Levels of heavy metals are found in soils and waters of the major tributary valleys of the Jordan Valley. Heavy metal content in soils irrigated by treated waste water were measured for a 40 km reach of Zarqa River. Soil samples from eight different sites along the upper course of this river were analyzed to determine the concentration of selected heavy metals (CO, Cr, Cu, Pb, Ni, Zn). Silt forms the major component of the soils with an average of 54%. Clay fractions show an increase with depth from 17 to 41%. Trends in particle size distribution and metal contents were compared across sample sites. Samples contained moderate to considerable levels of Pb and Ni. Concentrations of Cu and Cr ranged between 33–59 and 65–90 ppm, respectively. These values represent a slight to moderate class of pollution. The concentration of Cr shows a decrease with depth and distance from the waste water plant. Cu, Zn, and Ni show increasing concentrations with depth but Pb and CO do not. The concentrations of the measured heavy metals increases near the waste water treatment plant but decreases with distance from the plant due to precipitation in the stream bed and dilution with stream water. This decline in metal content with distance from the treatment plant suggests that most metals reaching floodplain soils may derive from the same source. Although current metal concentrations are low to moderate, floodplain surface soils in this area should be regarded as a potential source for future heavy metal pollution downstream.     

Quartz from Allchar as monitor for cosmogenic 26Al: Geochemical and petrogenetic constraints

Summary Results of a multidisciplinary study on quartz concentrates (mineralogically separated) and etched concentrates (stoichiometric quartz) from three locations at Allchar (Macedonia) are presented. The investigation of quality and composition of these quartz samples is of great interest because the same material has been previously used as monitor for ²⁶Al Acceleration Mass-Spectrometry (AMS) erosion rate estimates. Two genetically different types of quartz are distinguished in the studied samples which petrologically can be described as hydrothermally altered dacites or quartz latites; i.e. volcanic (Q_V) and hydrothermal (Q_H) quartz with relative proportions of Q_H:Q_V around 3:2. Q_H is genetically related to the Allchar Sb–As–Tl–S mineralization having very high Sb (85–785 ppm), As (7.6–78 ppm) and (Tl 3.3–4.0 ppm) contents. This type of quartz is also characterized by very high Li (129–138 ppm), Al (2424–2520 ppm) and Ti (153–219 ppm) concentrations. Q_V appears to be much less enriched in trace elements having Al and K contents ranging from 0 to 280 ppm and from 50 to 85 ppm, respectively. ²⁶Al AMS measurements were done on the samples containing two genetically different types of quartz but this had no effects on the interpretation and erosion rate determinations. However, the extremely high Al concentrations in the analyzed quartz have generally negative effects, mainly by decreasing ²⁶Al/²⁷Al ratios and thus causing an increase of the detection limit. The disagreement between the results of ²⁶Al AMS analyses and quantitative geomorphologic data for one location is probably caused by different geographical position with respect to the direction of cosmic rays.     

Assessing variability of water quality in a groundwater-fed perennial lake of Kashmir Himalayas using linear geostatistics

This paper presents a study on Manasbal lake, which is one of the high altitude lakes in the Kashmir Valley, India. Eighteen water samples were analysed for major ions and trace elements to assess the variability of water quality of the lake for various purposes. Geostatistics, the theory of regionalized variables, was then used to enhance the dataset and estimate some missing spatial values. Results indicated that the concentration of major ions in the water samples in winter was higher than in summer. The scatter diagrams suggested the dominance of alkaline earths over the alkali elements. Three types of water were identified in the lake that are referred to as Ca–HCO₃, Mg–HCO₃ and hybrid types. The lake water was found to be controlled by rock–water interaction with carbonate lithology as a dominant source of the solutes. The major (Ca^2 +, Mg^2 +, Na⁺, K⁺, NO₃ and HCO₃^-{\rm{HCO}}_{3}^{-}, CO₃ and Cl) and trace elements of the lake water were within the World Health Organization standards, therefore the lake water was considered chemically safe for drinking purposes. Although NO₃ concentration (ranging from 1.72 to 2 mg/L), is within the permissible limit and not very alarming, the gradually increasing trend is not acceptable. It is however, important to guard its spatio-temporal variability as the water is used for domestic as well as agricultural purposes. This study is significant as hydrogeological information on such high altitude lakes in India is scanty.     

Thermal waters of the Hornonitrianska kotlina depression and their utilization

 Slovakia has many areas rich in thermal waters one of which is the Hornonitrianska kotlina depression. At four localities three types of waters are found. The first belongs to the Ca–Mg–HCO₃ type with T.D.S. 0.7 g/l, the second to the Ca–Mg–SO₄ type with T.D.S. 1.37–2.01 g/l and the third to the Ca–Mg–SO₄–HCO₃ type with T.D.S. 0.97 g/l. Discharge at individual localities varies up to 30 l/s and temperatures of water reach 32.5–66.6  °C. The waters are predominantly used for healing, rehabilitation purposes, recreation and heating. Received: 8 March 1999 · Accepted: 7 June 1999     

Manzala lagoon, Nile delta, Egypt: modern sediment accumulation based on radioactive tracers

 This study was undertaken to determine whether recent anthropogenic changes in the Nile basin have affected the modern rate of sediment accumulation in the Nile delta. Excess ²¹⁰Pb, ¹³⁷Cs, and ^239,240Pu were used to develop a sediment chronology for a core from central Manzala lagoon, the delta sector which has had the highest average rate of sediment accumulation during the Holocene (to about 0.7 cm year^–1). Excess ²¹⁰Pb was detected in the top 32 cm of the core, yielding an accumulation rate of 1.2 cm year^–1, higher than the mean rate for the Holocene. A high ¹³⁷Cs/^239,240Pu ratio requires a reactor source (possibly Chernobyl) for these nuclides. Low concentrations of excess ²¹⁰Pb and weapons-fallout nuclides precluded recognition of changes in sediment accumulation rate in Manzala lagoon during this century and may limit the use of tracer radionuclides for modern sediment chronology in the Nile delta. Received: 18 March 1997 · Accepted: 22 July 1997     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Hydrogeochemical analysis and evaluation of groundwater quality in the Gadilam river basin,Tamil Nadu,India

Water samples were collected from different formations of Gadilam river basin and analyzed to assess the major ion chemistry and suitability of water for domestic and drinking purposes. Chemical parameters of groundwater such as pH, electrical conductivity (EC), total dissolved solids (TDS), Sodium (Na⁺), Potassium (K⁺), Calcium (Ca⁺), Magnesium (Mg⁺), Bicarbonate (HCO₃  ^-_{3}^{\ \,-}), Sulphate (SO₄  ^-_{4}^{\ \,-}), Phosphate (PO₄  ^-_{4}^{\ \,-}) and Silica (H₄SiO₄) were determined. The geochemical study of the aquatic systems of the Gadilam river basin show that the groundwater is near-acidic to alkaline and mostly oxidizing in nature. Higher concentration of Sodium and Chloride indicates leaching of secondary salts and anthropogenic impact by industry and salt water intrusion. Spatial distribution of EC indicates anthropogenic impact in the downstream side of the basin. The concentration levels of trace metals such as Iron (Fe), Lead (Pb), Nickel (Ni), Bromide (Br), Iodide (I) and Aluminium (Al) have been compared with the world standard. Interpretation of data shows that some trace metals such as Al, Ni and Pb exceed the acceptable limit of world standard. Geophysical study was carried out to identify the weathered zone in the hard rock and contaminated zone by anthropogenic impact in the downstream of river Gadilam. A few of the groundwater samples in the study area were found to be unsuitable for domestic and drinking purposes.     

The chemistry of suspended particulate material in a highly contaminated embayment of Port Jackson (Australia) under quiescent,high-wind and heavy-rainfall conditions

This study investigated physico-chemical characteristics of the water column and chemistry of suspended particulate material (SPM) under quiescent, high-wind and high-wind/heavy-rainfall conditions in Homebush Bay, a highly contaminated embayment of Port Jackson (Australia) to distinguish source and possible adverse effects to benthic and pelagic animals. Mean concentrations in surficial sediment were <1, 14, 181, 141, 37, 290 and 685 μg g⁻¹ for Cd, Co, Cr, Cu, Ni, Pb and Zn, respectively. Sediment chemistry indicated these metals had multiple sources, i.e. the estuary, stormwater and industry. Mean total suspended solids (TSS) were 7, 17 and 20 mg L⁻¹ during quiescent, high-rainfall and heavy rainfall/high wind conditions, respectively, whereas SPM Cd, Co, Cr, Cu, Ni, Pb and Zn concentrations varied between 13–25, 166–259, 127–198, 38–82, 236–305 and 605–865 μg g⁻¹, respectively under these conditions. TSS and total water metal concentrations were lowest during quiescent conditions. High TSS and metal loads in surface water characterised high-rainfall events. Wind-induced resuspension contributed the greatest mass of SPM and metals to the water column. Benthic animals may be adversely affected by Pb and Zn in sediment. Total water Cu and Zn concentrations may pose a risk to filter-feeding animals in the water column due to resuspension of contaminated sediment.