PAOLO: A Polarimeter Add‐On for the LRS Optics at a Nasmyth focus of the TNG

We describe a new polarimetric facility available at the Istituto Nazionale di AstroFisica / Telescopio Nazionale Galileo at La Palma, Canary islands. This facility, PAOLO (Polarimetric Add‐On for the LRS Optics), is located at a Nasmyth focus of an alt‐az telescope and requires a specific modeling in order to remove the time‐ and pointing position‐dependent instrumental polarization. We also describe the opto‐mechanical structure of the instrument and its calibration and present early examples of applications. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparing the GREGOR solar telescope for night‐time use: Deriving a pointing model

We report on the results of a dedicated campaign to derive a pointing model for the GREGOR solar telescope which took place in December 2011. Two main goals were in the focus of this campaign: first to prove the aptness of the GREGOR solar telescope for night‐time, unattended operations and second to derive some qualitative measure of the amount of misalignment in the optical and mechanical parts of the telescope. In the final version, a root‐mean‐square deviation (RMSD) of 1.6″ for the azimuth model and an RMSD of 2.3″ in the elevation model could be achieved (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A method for arc-second determination of solar burst emission centers with high time resolution and sensitivity at 48 GHz

A 48 GHz five-radiometer front end was installed at the Cassegrain focus of the 13.7-m Itapetinga antenna for the observation of solar bursts. The system works with five beam patterns partly overlapping. The five antenna temperatures are recorded with a temporal resolution of 1 millisecond, including time and antenna position. The ratios of the incoming antenna signals are used to determine the centroid of burst emission. Its coordinates are determined from groups of three receivers by using a least-square fit. In favourable observing conditions we obtain an angular accuracy of about 2 arc sec (r.m.s.), with a time resolution of 1 ms and a sensitivity of 0.05 s.f.u. The accuracy of the antenna tracking, the absolute pointing and the quality of radio seeing at Itapetinga are discussed. A preliminary analysis of an impulsive solar burst event is used to illustrate the capabilities of the method described here.     

Double‐pass spectro‐imaging: TUNIS

We present TUNIS, a double‐pass spectro‐imager built in THEMIS as a proof‐of‐concept for EST. Basic concepts and selected first results are shown. We introduce the concept of a Hadamard spectral mask as a proposition to move forward from the present implementation of a single‐wavelength per image pixel to a more general one of multiplexed spectral information that improves the temporal coherence of the spectral measurement (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

THEMIS instrumental control

The THEMIS control system architecture is described here as well as the instrument supervisory and control system.The THEMIS instrument supervisory and control system offers data management capability, such as easy to use I/O configuration for large channel‐count applications, automatic data logging, real time and historical trending.     

An X‐shooter survey of star forming regions: Low‐mass stars and sub‐stellar objects

We present preliminary results of our X‐shooter survey in star forming regions. In this contribution we focus on subsamples of young stellar and sub‐stellar objects (YSOs) in the Lupus star forming region and in the TW Hya association. We show that the X‐shooter spectra are suitable for conducting several parallel studies such as YSO + disk fundamental parameters, accretion and outflow activity in the very low‐mass (VLM) and sub‐stellar regimes, as well as magnetic activity in young VLM YSOs, and Li abundance determinations. The capabilities of X‐shooter in terms of wide spectral coverage, resolution and limiting magnitudes, allow us to assess simultaneously the accretion/outflow, magnetic activity, and disk diagnostics, from the UV and optical to the near‐IR, avoiding ambiguities due to possible YSO variability (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

New observing modes of a future HTN‐based distributed detection network for high time resolution and quantum optical astrophysics experiments

This contribution aims to introduce the idea that a well‐evolved HTN of the far future, with the anticipated addition of very large apertures, could also be made to incorporate the ability to carry out photonic astronomy observations, particularly Optical VLBI in a revived Hanbury‐Brown and Twiss Intensity Interferometry (HBTII) configuration. Such an HTN could exploit its inherent rapid reconfigurational ability to become a multi‐aperture distributed photon‐counting network able to study higher‐order spatiotemporal photon correlations and provide a unique tool for direct diagnostics of astrophysical emission processes. We very briefly review various considerations associated with the switching of the HTN to a special mode in which single‐photon detection events are continuously captured for a posteriori intercorrelation. In this context, photon arrival times should be determined to the highest time resolution possible and extremely demanding absolute time keeping and absolute time distribution schemes should be devised and implemented in the HTN nodes involved. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Star‐forming galaxies observed with X‐shooter

In the last couple of decades hundreds of studies have explored the nature of star‐forming galaxies at different redshifts. This contribution focuses on X‐shooter observations of star‐burst galaxies at 0 < z < 6 from commissioning runs, science verification, and regular observations, and demonstrates the capability of the new instrument in this competitive field. Observations of gravitationally lensed galaxies show that X‐shooter has no limitation in the redshift desert (1.4 < z < 2) where the strong optical emission lines are shifted to the near‐IR region. Physical properties of galaxies, such as masses, metallicities, abundance ratios, and star formation rates can be derived from observations with relatively short integration times for faint galaxies. The simultaneous UV to near‐IR spectral coverage makes derivation of physical quantities more reliable because there are no differential slit losses as may occur when observations from different optical and near‐IR instruments are used. Over the entire redshift range, spectra of faint galaxies will allow us to better measure stellar ages and dominating ionisation sources compared to broad band spectral energy distribution measurements (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Global 3‐D solar‐type star‐disc dynamo systems: I. MHD modeling

We have carried out global three‐dimensional magnetohydrodynamic simulations of the star‐disc interaction region around a young solar‐type star. The magnetic field is generated and maintained by dynamos in the star as well as in the disc. The developing mass flows possess non‐periodic time‐variable azimuthal structure and are controlled by the nonaxisymmetric magnetic fields. Since the stellar field drives a strong stellar wind, accretion is anti‐correlated with the stellar field strength and disc matter is spiraling onto the star at low latitudes, both contrary to the generally assumed accretion picture. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

NAHUAL: a near‐infrared high‐resolution spectrograph for the GTC optimized for studies of ultracool dwarfs

We present the status of an ongoing study for a high‐resolution near‐infrared echelle spectrograph for the 10.4‐m GTC (Gran Telescopio de Canarias) which will soon start operating at the Observatorio del Roque de los Muchachos on the island of La Palma. The main science driver of this instrument, which we have baptized NAHUAL, is to carry out a high precision radial velocity survey of exoplanets around ultracool dwarfs. NAHUAL is being especially designed to achieve the highest possible accuracy for radial velocity measurements. The goal is to reach an accuracy of a few m/s. It is thus required that the instrument is cross‐dispersed and that it covers simultaneously a wide wavelength range. Absorption cells will be placed in front of the slit which will allow a simultaneous self‐reference similar to an iodine‐cell in the optical regime. It is planned to place the instrument at one of the Nasmyth platform of the GTC behind the Adaptive Optics system. Our current design reaches a maximum spectral resolution of λ/Δλ = 50000 with a slit width of 0.175 arcsec, and gives nearly complete spectral coverage from 900 to 2400 nm. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effect of the prompt particle environment at L2 on optical CCDs for astronomy and astrophysics

The increasing number of probes carrying large focal planes consisting of many charge-coupled devices (CCDs), planned to be sent to the L2 Lagrangian point, 1.5 million kilometres from Earth in the next 15 years, implies that a detailed study of the effects of the prompt particle environment at L2 on CCDs is required. The focus of this study will be on CCDs for optical astronomy, astrometry and photometric applications. This study will be of particular interest to GAIA the European Space Agency's (ESA) cornerstone optical astronomy mission to further explore and map sections of our galaxy in greater detail. The results will also have implications for future X-ray astronomy missions like the X-ray Evolving Universe Spectroscopy Mission (XEUS). Both the above missions will require large area focal planes incorporating many CCD detectors.The sources of the instrument background are both solar and galactic and if a probe is launched around the peak in the next solar cycle (2010), the possible false detection rate or the amount of data that could be lost during a mission must be determined. This paper presents measured data for a spacecraft in a geostationary orbit, specifically Geosynchronous Operational Environmental Satellites (GOES) data, and makes predictions of the flux and energy of the particle environment at L2. The solar and galactic cosmic ray background was determined by using the Cosmic Ray Effects on Micro-Electronics or CREME96 code. A comparison was then made between the GOES data and the output from the CREME96 code in order to make predictions about the L2 environment.     

An improved astrometric calibration technique for space debris observation

An optical survey is the main technique for detecting space debris. Due to the specific characteristics of observation, the pointing errors and tracking errors of the telescope as well as image degradation may be significant, which make it difficult for astrometric calibration. Here we present an improved method that corrects the pointing and tracking errors, and measures the image position precisely. The pipeline is tested on a number of CCD images obtained from a 1-m telescope administered by Xinjiang Astronomical Observatory while observing a GPS satellite. The results show that the position measurement error of the background stars is around 0.1 pixel, while the time cost for a single frame is about 7.5 s; hence the reliability and accuracy of our method are demonstrated. In addition, our method shows a versatile and feasible way to perform space debris observation utilizing non-dedicated telescopes, which means more sensors could be involved and the ability to perform surveys could be improved.     

The design of the Central-Axis Reflector (ZAS)

The Central-Axis Reflector, the design principle which is presented below is a segmented-mirror telescope. The inventions relate mainly to the optical system and to the tracking apparatus.A large number of small individual mirror bodies, ground off-axis (hexagonal/polygonal) produce one primary mirror with closed circular aperture when joined together.The overall design of the tracking apperatus results directly —and thus without unnecessary adornment — from the two planes of to aminimum but which are required for tracking of the telescope.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Rapid instrument exchanging system for the Cassegrain focus of the Lijiang 2.4-m Telescope

As a facility used for astronomical research, the Lijiang 2.4-m telescope of Yunnan Astronomical Observatories, requires the ability to change one auxiliary instrument with another in as short a time as possible. This arises from the need to quickly respond to scientific programs(e.g. transient observation, time domain studies) and changes in observation conditions(e.g. seeing and weather conditions). In this paper, we describe the design, construction and test of hardware and software in the rapid instrument exchange system(RIES) for the Cassegrain focal station of this telescope, which enables instruments to be quickly changed at night without much loss of observing time. Tests in the laboratory and at the telescope show that the image quality and pointing accuracy of RIES are satisfactory.With RIES, we observed the same Landolt standard stars almost at the same time with the Princeton Instruments VersA rray 1300 B Camera(PICCD) and the Yunnan Faint Object Spectrograph and Camera(YFOSC), while both were mounted at the Cassegrain focus. A quasi-simultaneous comparison shows that the image quality of the optical system inside the YFOSC is comparable with that provided by the PICCD.     

基于光学辅助指向测量的太赫兹望远镜指向误差模型研究

针对太赫兹波段天文点源目标较少, 指向测量相对困难的特点, 研究了利用与太赫兹天线共轴的小型光学望远镜来辅助太赫兹望远镜指向测量以及建立指向误差修正模型的方法. 依托紫金山天文台1.2 m斜轴式太赫兹天线开展了光学辅助指向测量的实验研究, 利用一台安装在天线背架上的100mm口径折射式光学望远镜获得了优于2$''$的指向测量精度. 此外, 通过对斜轴天线的结构分析以及大气折射和本地恒星时(Local Sidereal Time, LST)偏差等误差来源的分析, 建立了包含23个误差项的斜轴式光学指向修正模型, 实现了约3$''$的拟合精度. 最后, 借助高精度数字摄影测量对光电轴一致性进行了标定, 并针对其对指向模型精度的影响进行了讨论. 研究成果将为南极5 m太赫兹望远镜(The 5m Dome A Terahertz Explorer, DATE5)及其他太赫兹望远镜提供指向测量和指向修正模型方面的技术参考.     

Resolution of impact‐related microstructures in lunar zircon: A shock‐deformation mechanism map

Abstract– The microstructures of lunar zircon grains from breccia samples 72215, 73215, 73235, and 76295 collected during the Apollo 17 mission have been characterized via optical microscopy, cathodoluminescence imaging, and electron backscatter diffraction mapping. These zircon grains preserve deformation microstructures that show a wide range in style and complexity. Planar deformation features (PDFs) are documented in lunar zircon for the first time, and occur along {001}, {110}, and {112}, typically with 0.1–25 μm spacing. The widest PDFs associated with {112} contain microtwin lamellae with 65°/<110> misorientation relationships. Deformation bands parallel to {100} planes and irregular low‐angle (<10°) boundaries most commonly have <001> misorientation axes. This geometry is consistent with a dislocation glide system with <100>{010} during dislocation creep. Nonplanar fractures, recrystallized domains with sharp, irregular interfaces, and localized annealing textures along fractures are also observed. No occurrences of reidite were detected. Shock‐deformation microstructures in zircon are explained in terms of elastic anisotropy of zircon. PDFs form along a limited number of specific {hkl} planes that are perpendicular to directions of high Young’s modulus, suggesting that PDFs are likely to be planes of longitudinal lattice damage. Twinned {112} PDFs also contain directions of high shear modulus. A conceptual model is proposed for the development of different deformation microstructures during an impact event. This “shock‐deformation mechanism map” is used to explain the relative timing, conditions, and complexity relationships between impact‐related deformation microstructures in zircon.     

Design and implementation of an image stabilization device at the THEMIS solar telescope

An image stabilizer has been inserted into the optical path of the THEMIS solar telescope. THEMIS is a Ritchey–Chretien reflector telescope using an altazimuthal mount and closely tied to its spectrograph. The optical and mechanical design, implementation and system tests are described, and emphasis is put on the complexity of situations that this stabilizer must accept, including the scanning of the solar surface while stabilizing. The current closed-loop crossover frequency of the device is 65 Hz at ??3 dB on all typical solar scenes.     

WIP: A Web‐based program for indexing planar features in quartz grains and its usage

Planar deformation features (PDFs) in quartz are the most important diagnostic features that allow the unambiguous identification of impact structures on Earth. In order to confirm that these features (that are characterized by planar character and form along specific crystallographic planes) are indeed PDFs, they need to be properly investigated and indexed. Following universal‐stage measurements, the process of indexing is usually performed manually, using a Wulff stereonet and following a strict procedure, which is time consuming and error prone. In this article, we present WIP, a new Web‐based program for indexing planar deformation features in quartz. The correctness of our program is shown by its application to measurements that had previously been indexed manually. The observed minor differences, especially in the absolute frequency percentage of PDFs, are negligible and not significant enough to influence the estimation of shock pressure that could be calculated from the indexed results. Usability of this program is shown using the spatial relationships between a statistically significant number of 278 quartz grains with 409 sets of PDFs analyzed within the area (~35 mm²) of a single thin section of a meta‐greywacke from the Bosumtwi impact structure. Our program is not only more accurate and faster than the manual (graphical) method but also removes the human error from the plotting process and allows control of several parameters, such as the value of estimated measurement error used in the indexing calculation or method of aggregated error handling. The program also provides information about the angles between the planes of the measured PDF sets present in a grain, which allows determination of the angles between (for example) indexed {} and {} sets.     

Mechanical structure of JNLT

The Japanese National Large Telescope (JNLT) requires mechanical performance of high tracking accuracy to achieve good image quality and a mechanical configuration to provide several kinds of focus modes. Under these requirements, a conceptual design for the JNLT mechanical structure has been performed. This paper presents the results of the conceptual design currently under consideration.Paper presented at the symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.