STRUCTURES OF DUNES AT WHITE SANDS NATIONAL MONUMENT,NEW MEXICO (AND A COMPARISON WITH STRUCTURES OF DUNES FROM OTHER SELECTED AREAS)1

The type, scale, and relative abundance of sedimentary structures in four kinds of dunes at White Sands National Monument, New Mexico, were determined by examination of vertical sections on walls of trenches cut through the dunes both in a windward direction and at right angles to this direction. Analysis of cross-stratification in all dunes examined indicated certain common features: sets of cross-strata mostly are medium- to large-scale; nearly all laminae dip downwind at high angles (not uncommonly at 30°-34°); most bounding surfaces between sets of cross-strata are nearly horizontal on the upwind side, but have progressively steeper dips to lee, downwind; and individual sets of cross-strata tend to be thinner and the laminae flatter near the top than at the bottom of a dune in vertical section. Sparse but distinctive structural features that are characteristic of the four types of dunes are varieties of contorted bedding, rare ripple laminae, and either local scour-and-fill bedding, or festoon bedding. Other structures, apparently limited to either one or two types of dunes, are the concave-downward foresets in some parabolic dunes; the low-angle reverse dips of upwind strata on high transverse dunes; and the almost horizontal laminae which represent apparent dip in sections normal to wind direction in dome-shaped and transverse dunes. Describing cross-stratification in terms of three dimensions, dune structure at White Sands consists dominantly of the tabular planar sets, with units thickest near the dune base, thinner above. To a lesser extent the sets are of simple (non-erosion) tabular form and relatively uncommonly, of the trough type. Wedge planar forms are scarce. The planar forms characteristically are of two classes in nearly equal proportions: those in which bounding surfaces are virtually horizontal and those in which they dip at moderate to high degree. A brief comparison is made between the structures of dunes that are characteristic of one effective wind direction, as at White Sands, and certain others formed by winds of two or more directions. Seif dunes of Libya, reversing dunes of the San Luis Valley, Colorado, and star dunes in Saudi Arabia are discussed as examples of complex dunes formed by multi-directional winds.     

The structure and development of foredunes on a locally prograding coast: insights from ground-penetrating radar surveys, Norfolk, UK

The internal structure of coastal foredunes from three sites along the north Norfolk coast has been investigated using ground‐penetrating radar (GPR), which provides a unique insight into the internal structure of these dunes that cannot be achieved by any other non‐destructive or geophysical technique. Combining geomorphological and geophysical investigations into the structure and morphology of these coastal foredunes has enabled a more accurate determination of their development and evolution. The radar profiles show the internal structures, which include foreslope accretion, trough cut and fill, roll‐over and beach deposits. Foredune ridges contain large sets of low‐angle cross‐stratification from dune foreslope accretion with trough‐shaped structures from cut and fill on the crest and rearslope. Foreslope accretion indicates sand supply from the beach to the foreslope, while troughs on the dune crest and rearslope are attributed to reworking by offshore winds. Bounding surfaces between dunes are clearly resolved and reveal the relative chronology of dune emplacement. Radar sequence boundaries within dunes have been traced below the water‐table passing into beach erosion surfaces. These are believed to result from storm activity, which erodes the upper beach and dunes. In one example, at Brancaster, a dune scarp and erosion surface may be correlated with erosion in the 1950s, possibly the 1953 storm. Results suggest that dune ridge development is intimately linked to changes in the shoreline, with dune development associated with coastal progradation while dunes are eroded during storms and, where beaches are eroding, a stable coast provides more time for dune development, resulting in higher foredune ridges. A model for coastal dune evolution is presented, which illustrates stages of dune development in response to beach evolution and sand supply. In contrast to many other coastal dune fields where the prevailing wind is onshore, on the north Norfolk coast, the prevailing wind is directed along the coast and offshore, which reduces the landward migration of sand dunes.     

The origin of bounding surfaces in ancient aeolian sandstones

Three orders of aeolian bounding surface are arranged in a hierarchy based on their extent and regularity. First order surfaces are the most extensive. They are flat-lying bedding planes cutting across all other aeolian structures and are attributed to the passage of the largest aeolian bedforms—draas—across an area. First order surfaces cut across second order surfaces, which are gentle to moderately dipping surfaces bounding sets of cross-strata. Second order surfaces are attributed to the passage of dunes across draas, or to longitudinal dunes migrating across the lower ice slopes of draas. Third order surfaces bound bundles of laminae within coscts of cross laminae and are due either to local fluctuations in wind direction and velocity or to changes in airflow patterns caused by configurational changes in dune patterns. All these bounding surfaces could be explained by wind variations and dune migration, but the rates of dune migration relative to probable sediment deposition rates are incompatible with this general explanation of the form and spacing of the bounding surfaces. The concept of climbing bedforms of different hierarchical order together with subsidence provides a better explanation. Analogous bounding surfaces in aqueous bedforms have already been attributed to climbing bedforms of differing hierarchical order.     

Tertiary Tsondab Sandstone Formation: preliminary bedform reconstruction and comparison to modern Namib Sand Sea dunes

The Tertiary Tsondab Sandstone Formation, which underlies much of the present Namib Sand Sea, is a key element in understanding the Cenozoic evolution of the Namib Desert. Outcrops of the aeolian facies of the Tsondab Sandstone at Elim and Diep Rivier consist of two sequences of bioturbated cross-strata separated by likely formation-scale surfaces of stabilisation. Cross-strata consist of scalloped sets about 200 m in width and separated by southeast dipping bounding surfaces. Internally, sets contain reactivation surfaces of probable seasonal origin. The north to south-southeast dipping foresets define crescent shapes with a trough axis trending northeast. Although additional data are needed to define the Tsondab bedform, the outcrop data is best satisfied in computer simulations by north trending, east migrating main bedforms, which had relatively large and slow-moving dunes superimposed upon their eastern flanks and migrated to the north. Foresets dipping to the south to south-southwest at Elim suggest that superimposed dunes also occurred on the western flanks of the main bedform and migrated to the south, but that their record was largely lost with net eastward migration of the main bedform. This preliminary Tsondab model shares attributes such as trend, scale of cross-strata, and presence of scalloped sets with reactivation surfaces with computer models of the modern linear dunes in which large-scale sinuosity migrates alongcrest to the north. Differences emerge in the overall set architecture and the orientation of cross-strata and bounding surfaces, as well as the degree of vegetation that must have characterised Tsondab dunes.     

Late Proterozoic periglacial aeolian deposits on the West African Platform, Taoudeni Basin, western Mali

The Late Proterozoic Bakoye 3 Formation is a predominantly aeolian unit deposited in the glacially influenced cratonic Taoudeni Basin of western Africa. The Bakoye 3 can be divided into five distal units, two proximal units, and a local upper massive sandstone. The basal Unit 1 shows a complex interfingering of aeolian and subaqueous structures, and is interpreted as the precursor of the overlying erg sequences. Unit 2 consists of compound, trough cosets of aeolian cross-strata dominated by grain-flow strata. The unit is interpreted to represent draas with superimposed, small, crescentic dunes. A super bounding surface marks the termination and planation of the erg. Unit 3 is distinguished from the underlying Unit 2 by its larger, overall simple sets of trough cross-strata, interpreted to represent simple, large, crescentic dunes. Unit 4 occurs only locally in laterally discontinuous, large troughs. In one case the trough is filled by small sets of tabular cross-strata dominated by grain-flow deposits. At another section, wedges of coarse-grained wind-ripple strata fill the trough. Unit 4 may represent remnants of ergs or, more likely, local deposition in depressions. The depressions, in the latter scenario, formed with the development of a second super surface that truncates Unit 3. Unit 5 consists of very large sets of wind-ripple cross-strata with less common sets of grain-flow deposits. These deposits are believed to represent enormous dunes with large plinths and subordinate slip face development. A third super surface separates Unit 5 from overlying marine deposits. Together, Units 1–5 represent the core of the ergs in a distal position relative to adjacent upland source areas. Proximally, aeolian deposits are simple, smaller, trough sets interpreted as moderate sized crescentic dunes. Coarse-grained braided stream deposits are prominent. Locally, the top of the Bakoye 3 is marked by channelized mass-flow deposits containing aeolian blocks, and is believed to have resulted from iceberg grounding. An overall environment for the Bakoye 3 is one of uplands marked by ice sheets, with outwash plains extending distally to aeolian ergs. Super surfaces, all marked by polygonal fractures and coarsegrained sediment, represent periods of erg termination that may be linked to glacial-fluvial-aeolian cycles.     

Internal structure of mixed-sand-and-gravel beach deposits revealed using ground-penetrating radar

ABSTRACT Mixed‐sand‐and‐gravel beaches are a distinctive type of coarse‐clastic beach. Ground‐penetrating radar (GPR) and photographic records of previous excavations are used to investigate the stratigraphy and internal sedimentary structure of mixed‐beach deposits at Aldeburgh in Suffolk, south‐east England. The principles of radar stratigraphy are used to describe and interpret migrated radar reflection profiles obtained from the study site. The application of radar stratigraphy allows the delineation of both bounding surfaces (radar surfaces) and the intervening beds or bed sets (radar facies). The deposits of the main backshore berm ridge consist of seaward‐dipping bounding surfaces that are gently onlapped by seaward‐dipping bed sets. Good correspondence is observed between a sequence of beach profiles, which record development of the berm ridge on the backshore, and the berm ridge's internal structure. The beach‐profile data also indicate that backshore berm ridges at Aldeburgh owe their origin to discrete depositional episodes related to storm‐wave activity. Beach‐ridge plain deposits at the study site consist of a complex, progradational sequence of foreshore, berm‐ridge, overtop and overwash deposits. Relict berm‐ridge deposits, separated by seaward‐dipping bounding surfaces, form the main depositional element beneath the beach‐ridge plain. However, the beach ridges themselves are formed predominantly of vertically stacked overtop/overwash units, which lie above the berm‐ridge deposits. Consequently, beach‐ridge development in this progradational, mixed‐beach setting must have occurred when conditions favoured overtopping and overwashing of the upper beachface. Interannual to decadal variations in wave climate, antecedent beach morphology, shoreline progradation rate and sea level are identified as the likely controlling factors in the development of such suitable conditions.     

What is preserved in the aeolian rock record? A Jurassic Entrada Sandstone case study at the Utah–Arizona border

Aeolian dune fields evolve from protodunes and small dunes into a pattern of progressively fewer, larger and more widely spaced dunes within limits defined by boundary conditions. However, the allogenic boundary conditions that promote aeolian dune‐field development, accumulation of strata and preservation of accumulated strata are not the same. Autogenic processes, such as dune interactions, scour‐depth variation along migrating dunes and substrate cannibalization by growing dunes, result in removal of the stratigraphic record. Moreover, dune‐field events may be collapsed into major erosional bounding surfaces. The question is what stages of evolving dune fields are represented in the rock record? This case study of ca 60 m of Jurassic Entrada Sandstone on the Utah/Arizona border (USA) defines stratigraphic intervals by gross architecture of bounding surfaces and sets of cross‐strata. The interpreted intervals in stratigraphic order consist of: (i) a lower sabkha bed that transitions upward into erosional remnants of small sets representing an initial wet aeolian system; (ii) large, compound cross‐strata representing a mature dune field; (iii) isolated scour‐fill representing negatively climbing dunes that produced ca 25 m of palaeo‐topographic relief; (iv) downlapping sets that fill the landscape‐scale relief; (v) four intervals of stacked climbing sets that each represent short periods of time; and (vi) an upper sabkha bed that again transitions into small sets representing a wet system. Accumulations appear to be associated with sediment pulses, a rising water table, and filling of scoured troughs and landscape‐scale depressions. Preservation of the accumulations is selective and associated with a rising water table, burial and subsidence. The preserved record appears remarkably incomplete. Speculation about missing strata gravitates towards cannibalization of the record of early dune‐field construction, and strata removed during the formation of bounding surfaces. This local Entrada record is thought to represent a point in the spectrum of preservation styles in the rock record.     

Erg deposits in the Lower Jurassic Wingate Sandstone, northeastern Arizona: oblique dune sedimentation

The Lower Jurassic erg (aeolian sand sea) deposits of the Wingate Sandstone on the Colorado Plateau are beautifully exposed near Many Farms, Arizona. These 3-D outcrops allow a detailed study of structures and sequenses in the erg body. The erg sequence comprises chiefly oblique dune deposits. The dune facies are in most cases characterized by a well-developed tripartite upbuilding. Each dune coset contains unusually thick and intricate bottomsets, medial low-angle dipping toesets, and upper steeply dipping foresets. The foresets reveal significant across-crest transport of sand and dip within a narrow range of directions towards the ESE. The bottomset beds are composed of compound cross-bedding that documents strong along-crest transport towards the SSW, whereas the toeset beds reveal upslope, downslope, and along-crest transport of sand. The ancient dunes apparently formed in a directionally varying wind flow with prevailing winds (early summer) from the NW and periodic strong winds (late summer) from the SW. The dunes were oblique not only to seasonal transport directions, but also to the resultant annual transport direction and dune migration direction. This was caused by the interaction of the dune system with the primary winds which resulted in secondary airflow and significant along-crest transport of sand. The erg deposits at Many Farms are separated by a number of super bounding surfaces suggesting several episodes of erg formation and destruction. The initial erg system was dominated by transverse dunes, but overlying ergs only contained oblique dunes. All erg systems were bounded to the SW by wide regions of erg margin environments in which aeolian sand sheet, fluvial, and lacustrine facies were deposited. Even though fluvial deposits are absent from the main part of the sequence at the study area, the effects of this system are reflected within the erg deposits at Many Farms.     

Aeolian architecture, bedform climbing and preservation space in the Cretaceous Etjo Formation, NW Namibia

Sets of aeolian cross‐strata within the Cretaceous Etjo Formation of NW Namibia are bounded by a hierarchy of surfaces, the origin of which are ascribed to one of four processes related to aeolian bedform and erg behaviour. The base of the main aeolian succession is characterized by a basin‐wide erosional supersurface that formed in response to a period of aeolian deflation before the onset of the main phase of erg building. Interdune migration surfaces formed by draa migration are planar in sections parallel to the palaeowind and are inclined at up to 5° in an upwind direction (SW). Perpendicular to the palaeowind, interdune surfaces form 500‐m‐wide troughs, signifying crestline sinuosity within the original bedforms. Superimposition surfaces are inclined at 5–10° in a downwind direction and indicate the migration of crescentic oblique dunes over larger, slipfaceless transverse draa. Reactivation surfaces associated with minor changes in dune slipface orientation are distinct from other bounding surface types because overlying cross‐strata lie parallel to them, rather than downlap onto them. Analysis of the geometry of these bounding surfaces, together with the orientation of the cross‐strata within the sets that they bound, has enabled the detailed morphology of the original bedforms to be reconstructed. The maximum preserved thickness of individual aeolian sets varies systematically across the basin, from 52 m in the basin depocentre to only 8 m at the basin margin. The set architecture indicates that this spatial variation is primarily the result of decreased angles of bedform climb at the basin margin, rather than the presence of smaller bedforms. Similarly, a temporal reduction in the angle‐of‐climb, rather than a reduction in bedform size, is considered to be responsible for an upward decrease in preserved set thickness. Reductions in bedform climb angle reflect progressive loss of accommodation space as the accumulating erg filled the basin.     

Significance of interdune deposits and bounding surfaces in aeolian dune sands

Bounding surfaces and interdune deposits provide keys for detailed interpretations of the development, shape, type, wavelength and angle of climb of aeolian bedforms, as well as overall sand sea conditions. Current alternate interpretations of bounding surfaces require very different, but testable models for sand sea deposition. Two perpendicular traverses of Jurassic Entrada Sandstone, Utah, reveal relations among cross-strata, first-order bounding surfaces, and horizontal strata. These field relations seem explicable only as the deposits of downwind-migrating, climbing, enclosed interdune basins (horizontal strata) and dune bodies consisting of superimposed smaller crescentic dunes (cross-stratified deposits). A 1.7 km traverse parallel to the palaeowind direction provides a time-transgressive view showing continuous cosets of cross-strata, first-order bounding surfaces and interdune deposits climbing downwind at an angle of a few tenths of a degree. Changes occur in the angle of climb, cross-strata structure, and interdune deposits; these reflect changes in depositional conditions through time. A 1.5 km traverse perpendicular to the palaeowind direction provides a view at an instant in geological time showing first-order bounding surfaces and interdune deposits forming flat, laterally discontinuous lenticular bodies. The distribution of interdune sedimentary structures in this traverse is very similar to that of some modern interdune basins, such as those on Padre Island, Texas. Hierarchies of bounding surfaces in an aeolian deposit reflect the bedform development on an erg. The presence of three orders of bounding surfaces indicates dune bodies consisting of smaller, super-imposed dunes. The geometry of first-order bounding surfaces is a reflection of the shape of the inter-dune basins. Second-order bounding surfaces originate by the migration of the superimposed dunes over the larger dune body and reflect individual dune shape and type. Third-order bounding surfaces are reactivation surfaces showing stages in the advance of individual dunes. The presence of only two orders of bounding surfaces indicates simple dunes. Modern and Entrada interdune deposits show a wide variety of sediment types and structures reflecting deposition under wet, damp, and dry conditions. Interdune deposits are probably the best indicators of overall erg conditions and commonly show complex vertical sequences reflecting changes in specific depositional conditions.     

Seaward dipping reflectors along the SW continental margin of India: Evidence for volcanic passive margin

Multi-channel seismic reflection profiles across the southwest continental margin of India (SWCMI) show presence of westerly dipping seismic reflectors beneath sedimentary strata along the western flank of the Laccadive Ridge — northernmost part of the Chagos-Laccadive Ridge system. Velocity structure, seismic character, 2D gravity model and geographic locations of the dipping reflectors suggest that these reflectors are volcanic in origin, which are interpreted as Seaward Dipping Reflectors (SDRs).     

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons,Gale crater,Mars

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca 10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.     

Cross-stratified calcarenites from New Zealand: subaqueous dunes in a cool-water, Oligo-Miocene seaway

Cross-bedded, cool-water, bioclastic limestones of the Te Kuiti Group on the North Island of New Zealand are composed primarily of bryozoans, echinoderms, and benthic foraminifers. Their prominent, large-scale, unidirectional cross-stratification is interpreted as produced by migrating subaqueous dunes on the floor of a 50–100 km wide, north-east-trending seaway in water depths of 40–60 m. These dunes are thought to have developed in response to strong, seaway-parallel, tidal currents combined with a north-east-directed, set-up or oceanic current. Cross-stratification is organized into four hierarchical levels: (1) cross-lamination; (2) first-order sets; (3) second-order sets; and (4) cross-stratified successions. The levels are based on increasing degrees of internal complexity. Distinct attributes such as internal organization, cross-set thickness, foreset shape, and lower bounding-surface shape are used to describe and interpret the cross-stratification. All these attributes are here integrated in a new and expanded classification of unidirectional cross-stratification that emphasizes flow and bedform dynamics rather than overall set shape. Individual cross-stratified successions are interpreted to have formed by dunes with varying sinuosity, superposition, and flow history, under conditions of different current strength but constant sediment production. Horizontally bedded successions are the result of robust, active dune fields that grew during times of vigorous sediment transport. Formset successions were produced from large compound dunes and are the expression of languid and decaying dune fields that developed during times of decreasing sediment transport. These decaying dunes were gradually smothered by continuously and locally produced bioclastic sediment. Formset cross-stratified successions are most likely to develop in carbonates, where the sediment is produced in place, than in terrigenous clastics where the sediment is imported.     

Internal sedimentary structure of linear dunes modelled with a cellular automaton

Linear dunes are the most common type of dune found on Earth and exist on several extra-terrestrial bodies, but despite this abundance their internal stratigraphy has not been commonly agreed. A cellular automaton is deployed to simulate the development of linear dunes, starting from a flat bed, under bi-modal oblique wind regimes of varying degrees of asymmetry. The internal stratigraphy of the linear dunes is monitored by keeping track of (buried) erosion surfaces, avalanche deposits and vertical accumulation, as well as the age of last subaerial exposure of the sediments. The simulations show the initial pattern-coarsening of a network of small dunes into fewer larger longitudinal ridges via bedform interactions and Y-junction dynamics. Three newly recognized types of bedform interaction are identified that relate to initial Y-junction dynamics: longitudinal crest-splitting, which creates free dune tips that can interact with adjacent dunes, and laterally oscillating interactions that lead to ephemeral Y-junctions (normal or reverse). The results show that these three bedform interactions leave no persistent signatures in the stratigraphic record. However, a further three bedform interactions involving the superposition of one dune onto another – merging, cannibalizing and repulsion (known from transverse dune field dynamics) – do leave specific evidence in the internal stratigraphy of the remaining dune, a buried interaction surface at a specific inclination. The preservation potential of this interaction surface varies between the three types. After the initial pattern-coarsening phase, the linear dunes become larger and more independent and their crest orientation follows the net resultant transport direction. The stratigraphies of mature dunes under wind regimes of differing asymmetry show that under (nearly) symmetrical winds the dune accumulates mainly vertically, with strata dipping parallel to the flanks, while under more asymmetrical wind regimes the internal stratigraphy resembles that of transverse dunes.     

探地雷达(GPR)在海南岛东北部海岸带调查中的应用 *

对海南岛东北部海岸带调查采用了探地雷达(GPR)研究海岸带沙体的结构、展布和沉积序列,取得了很好的效果。文章通过和有限的露头资料对比以及对反射波形态、结构的研究,确定了海滩脊、海岸沙丘的反射特征以及潜水面的位置。雷达图像显示五龙港古海滩脊由亚水平、不连续、高振幅和透镜状反射波组成;木兰头海岸沙丘已受到人类活动的扰动,短的、陡倾斜反射可能代表未受扰动的海岸风成沙的前积层。研究表明探地雷达是一种可靠、快速和经济的地球物理方法,在砂砾质海岸可产生高质量、高分辨率和连续的反射剖面,值得加以推广。     

Ground-penetrating radar investigation of active faults along the Dead Sea Transform and implications for seismic hazards within the city of Aqaba, Jordan

Ground-penetrating radar (GPR) was used in an effort to locate a major active fault that traverses Aqaba City, Jordan. Measurements over an exposed (trenched) cross fault outside of the city identify a radar signature consisting of linear events and horizontal offset/flexured reflectors both showing a geometric correlation with two known faults at a control site. The asymmetric linear events are consistent with dipping planar reflectors matching the known direction of dip of the faults. However, other observations regarding this radar signature render the mechanism generating these events more complex and uncertain.GPR measurements in Aqaba City were limited to vacant lots. Seven GPR profiles were conducted approximately perpendicular to the assumed strike of the fault zone, based on regional geological evidence. A radar response very similar to that obtained over the cross fault was observed on five of the profiles in Aqaba City, although the response is weaker than that obtained at the control site. The positions of the identified responses form a near straight line with a strike of 45°. Although subsurface verification of the fault by trenching within the city is needed, the geophysical evidence for fault zone location is strong. The location of the interpreted fault zone relative to emergency services, military bases, commercial properties, and residential areas is defined to within a few meters. This study has significant implications for seismic hazard analysis in this tectonically active and heavily populated region.     

Large-scale structure of Calamus River deposits (Nebraska, USA) revealed using ground-penetrating radar

The large-scale (i.e. bar-scale) structure of channel deposits of the braided, low-sinuosity Calamus River, Nebraska, is described using ground-penetrating radar (GPR) profiles combined with vibracores. Basal erosion surfaces are generally overlain by medium-scale, trough-cross-stratified (sets 3–25 cm thick), very coarse to medium sands, that are associated with relatively high amplitude, discontinuous GPR reflectors. Overlying deposits are bioturbated, small-scale cross-stratified (sets <3 cm thick) and vegetation-rich, fine to very-fine sands, that are associated with low-amplitude discontinuous reflectors. Near-surface peat and turf have no associated GPR reflectors. In along-stream profiles through braid and point bars, most GPR reflectors dip downstream at up to 2° relative to the basal erosion surface, but some reflectors in the upstream parts of bars are parallel to the basal erosion surface or dip upstream. In cross-stream profiles through bars, GPR reflectors are either approximately parallel to bar surfaces or have low-angle inclinations (up to 6°) towards cut banks of adjacent curved channels. Basal erosion surfaces become deeper towards cut banks of curved channels. These structures can be explained by lateral and downstream growth of bars combined with vertical accretion. Convex upwards forms up to 0·5 m high, several metres across and tens of metres long represent episodic accretion of unit bars (scroll bars and bar heads). Stratal patterns in channel fills record a complicated history of erosion and deposition during filling, including migration of relatively small bars. A revised facies model for this type of sandy, braided river has been constructed based on this new information on large-scale bedding structure.     

Aeolian granule ripple deposits, Namibia

Granule ripples are a common feature of most dunefields, yet they have seldom been recognized in ancient deposits. Although granule ripples are common in erosional settings, such as windward slopes of dunes, or scour surfaces in interdunes, they nevertheless migrate laterally and leave distinctive deposits that can be recognized in ancient rocks. These deposits have characteristics of ‘type B’sand sheet deposits, including: ‘poured-in’texture; curving ripple trough; tangential, coarse-grained foresets; irregular silty layers; well-sorted coarse and fine layers (either horizontal or within foresets); and fine layers in ripple troughs. Wind tunnel experiments suggest that under low-velocity wind conditions, granule ripples grow to a significant degree as parasites dependent on saltation of fine sand grains whose impact moves the larger grains of the granule ripple. Although the depositional surface of granule ripples is commonly coated with a layer of coarse grains, this is in most places only a few grains thick. Underlying deposits commonly have a poorly sorted, or ‘poured-in’texture. This texture results from an admixture of fine grains that fall among the spaces between the larger grains during deposition.     

沙丘背风侧气流及其沉积类型与意义

在腾格里沙漠东南缘对现代沙丘表面气流、沉积过程的野外观测结果表明,由于区域气流、沙丘形态及其相互作用等的不同使沙丘背风坡气流发生变化,在此发现三种背风坡次生气流 :分离流、附体未偏向流和附体偏向流。前者以弱的反向流为特征多发生在横向气流条件下坡度较陡的背风坡;后二者具有相对高的风速,其中附体流多发生在坡度缓和的背风坡,其方向在横向气流条件下保持原来的方向,而在斜向气流作用下发生偏转且其强度为原始风入射角的余弦函数。根据背风坡气流方向及强度,作者阐述了不同区域气流环境中沙丘背风坡沉积过程、层理类型及特征,探讨了交错层产状与区域气流方向之间的关系.     

Transverse and linear dunes in an Upper Pleistocene marine sequence, Corinth Basin, Greece

A range of large-scale dunes of oolitic calcarenite composition are exposed in the Corinth Basin of central Greece. These transverse dunes and a very large linear dune (> 15 m high) lie within an Upper Pleistocene, transgressive marine sequence. Tidal flow, accelerated by constriction through a narrow, fault-bounded seaway, is interpreted to have generated the current velocities necessary to produce the dunes. Marine facies in the Upper Pleistocene sequence include beach to offshore conglomerates and sandstones with wave-modified sedimentary structures and herringbone cross-stratification. An offshore facies association comprises variably bioturbated siltstones and sandstones with a varied marine fauna that includes thermophile species such as scleractinian corals and Strombus bubonius. Oolitic sandstone facies also occur. Oolitic sands were apparently produced in shoal environments subject to tidal (and wave) action, and transported by dominant southerly currents over the southern part of the basin. Oolites accumulated in a linear dune 2.7 km long and 15–20 m high and in three-dimensional transverse dunes up to 10 m high having a variety of compound and simple internal geometries. The isolated, WSW-ENE-trending linear form exhibits angle of repose sedimentary dips (up to 35°) of avalanche sets on its SE flank and sets typically with dips of 15–20° to the NW. Internal high-angle discontinuities are developed in the SE-dipping lee face. It is proposed that a dominant north-to-south flow crossed over the crest obliquely, resulting in both net erosional and depositional processes on the lee flank. A subordinate (?tidal) current may have locally and or periodically crossed the dune crest in a westwards direction. A string of transverse dunes, which were located adjacent to a fault/marine terrace scarp, is interpreted to have originally coalesced to form the linear dune. The distribution of transverse and linear dunes together with the palaeogeographical reconstruction suggest that a marine connection periodically existed across the Corinth Isthmus during the Late Pleistocene due to a combination of active faulting and glacio-eustatic highstands of sea level.