Fluid sources and stable isotope signatures in authigenic carbonates from the Northern Apennines,Italy

Authigenic carbonates are frequently associated with methane cold-seep systems, which extensively occur in various geologic settings worldwide. Of interest is the relation between the fluids involved in their formation and the isotopic signals recorded in the carbonate cements. Along the Northern Apennines foothills (Italy), hydrocarbons and connate waters still seeping nowadays are believed to be the primary sources for the formation of fossil authigenic carbonate found in Plio-Pleistocene marine sediments. Four selected outcrops of dolomitic authigenic carbonates were analysed to compare signature of seeping fluids with fractionation of stable carbon and oxygen isotopes recorded in the carbonate.Along the foothills, deep methane-rich fluids spontaneously rise to the surface through mud volcanoes or are exploited in wells drilled nearby to the fossil Plio-Pleistocene authigenic carbonates. The plumbing system providing fluids to present-day cold seeps was structurally achieved in Late Miocene and Plio-Pleistocene. δ¹³C values of methane, which vary from −51.9 to −43.0‰ VPDB, indicate that gas composition from the deep hydrocarbon reservoirs is relatively uniform along the foothills. On the contrary, δ¹³C in fossil authigenic carbonates strongly varies among different areas and also within the same outcrop.The different carbon sources that fed the investigated carbonates were identified and include: thermogenic methane from the deep Miocene reservoirs, ¹³C-enriched CO₂ derived from secondary methanogenesis and microbial methane from Pliocene successions buried in the Po Plain. The δ¹³C variability documented among samples from a single outcrop testifies that the authigenic carbonates might represent a record of varying biogeochemical processes in the hydrocarbon reservoirs. The sources of stable oxygen isotopes in authigenic carbonates are often ascribed to marine water. Oxygen isotopic fractionation in the dolomite cements indicates that marine pore water couldn't be the sole source of oxygen. δ¹⁸O values provide a preliminary evidence that connate waters had a role in the carbonates precipitation. The concomitant occurrence of active cold seepages and fossil record of former plumbing systems suggests that generation and migration of hydrocarbons are long-lasting and very effective processes along the Northern Apennines foothills.     

A contribution to the reconstruction of Miocene seepage from authigenic carbonates of the northern Apennines (Italy)

Authigenic carbonates from outcrops of the northern Apennines consist of small and irregular lenses and exhibit numerous features indicative of cold-seep settings. Detailed petrographic, mineralogical and geochemical studies from two Miocene deposits are presented. The first carbonate outcrop, named Fosso Riconi, is located in the foredeep basin of the Apenninic chain, whereas the second deposit represents a satellite basin called Sarsetta. The stable isotope data from specific carbonate minerals show a wide range of values well known from other palaeoseeps of the Apennine Mountains. The majority of seep carbonates are formed by low-Mg calcite and ankerite. Those minerals have δ¹³C values between ?7 and ?23‰ V-PDB, suggesting variable amounts of carbonate derived from oxidized methane, seawater (dissolved inorganic carbon) and sedimentary organic matter. Dolomite samples have the lowest δ¹³C values (?30.8 to ?39.0‰ V-PDB), indicating methane as the main carbon source. The findings suggest an evolutionary formation of the seeps and development of authigenic carbonates influenced by the activity of chemosynthetic organisms, of which large lucinid clams are preserved. Bioirrigation by the clams controlled the sediment–water exchange, and is here considered as an explanation for the anomalous Mg content of the calcite. We hypothesize that the seep carbonates were formed during periods of active methane-rich seepage, whereas during periods of slow seepage carbonate formation was reduced. Despite different geological settings, the two examined deposits of Sarsetta and Fosso Riconi show similar features, suggesting that a common pattern of fluid circulation played a major role in carbonate formation at both seep sites.     

Evolution of a Miocene carbonate shelf (northern Apennines,Italy) revealed through a quantitative compositional study

The evolution of the Miocene San Marino carbonate shelf (Torriana outcrop), developed on the accretionary prism of the northern Apennines, has been interpreted through a stratigraphic and compositional study. Modal analysis allowed to quantify the framework components and to identify four microfacies through which the main steps of the carbonate ecosystem were traced. The healthy phase of the carbonate shelf, dominated by bryozoans and echinoids, originated in a high-energy transgressive setting and evolved during a warm period characterized by a progressive increase of nutrients. The transitional stage is marked by a reduction of carbonate productivity and by terrigenous intermittent pulses associated with bioclast fragmentation. The drowning succession corresponds to deepening upward facies formed by fine-grained hybrid arenites to sandy marls with abundant planktonic foraminifera, glauconitic grains and clay matrix. The demise of the carbonate shelf might have resulted from a combination of regional and global factors that interplayed controlling the detrital input, the nutrient budget and the deepening of the basin. Synsedimentary tectonics triggered subsidence of the basin and enhanced terrigenous discharge. Moreover, the superposition of paleoclimatic and paleoceanographic events (Monterey and Middle Miocene Climate Optimum) could have contributed with the intense weathering and remarkable detrital and nutrients supply.     

Hydrocarbon-derived imprints in olistostromes of the Early Serravallian Marnoso-arenacea Formation,Romagna Apennines (northern Italy)

Evidence of hydrocarbon venting within slumped bodies associated with the siliciclastic, dominantly turbiditic, Marnoso-arenacea Formation (Umbria-Romagna structural domain, Romagna Apennine, northern Italy) is documented with sedimentological, faunal, and geochemical data. Specifically,¹³C-depleted carbonate concretions and limestones and clusters of chemosynthetic clams (Vesicomyidae) have been identified in the marls of the Le Caselle Olistostrome and other slumped bodies contained within the Early Serravallian section of the Marnoso-arenacea Fm. Most of the olistostrome marls and limestones are extrabasinal and must have slid from a source area located several kilometers southwest of their present position. Thus, they presumably pertain to the Vicchio Marls Formation of the northeastern (outer) Tuscan structural domain, with possible minor contributions from the epi-Ligurian Bismantova Fm. It is suggested that venting of methane in the source area of the olistostromes permitted the establishment of exotic chemosynthetic communities and promoted the precipitation of carbonate concretions and limestones. According to the field evidence, these materials were later subjected to multistep downslope remobilization and were eventually carried into the Marnoso-arenacea basin through gravity mass transport.     

桑沟湾长牡蛎生物沉积物对环境底质影响的同位素证据

贝类通过生物沉积作用加速了养殖海区水体中的颗粒物质向海底的输送。在桑沟湾中筏式养殖的长牡蛎(Crassostrea gigas),将大量的有机物以生物沉积物(真粪和假粪)的形式排向养殖区海底。为完成对桑沟湾筏式养殖长牡蛎生物沉积物对环境底质影响的量化研究,作者通过在桑沟湾内不同的海区设置采样点(5个养殖区,3个对照点),对采样点SG 2与SG 6两个点的长牡蛎生物性沉积物与海区悬浮颗粒物进行了稳定同位测定及有机物来源分析。实验结果表明:选取的采样点沉积物稳定碳氮同位素丰度集中于δ~(13)C–22.82‰~–21.62‰,δ~(15)N 4.73‰~6.21‰。在SG 2点的悬浮颗粒物中,长牡蛎生物性沉积物贡献有机物占9.95%,对照区沉积物与SG 2区沉积物贡献分别为54.19%和35.86%。在典型的采样点,稳定同位素法能较准确地量化出各有机物来源的贡献比例。以SG C点为对照,其余7个采样点长牡蛎生物性沉积物有机物贡献在4.06%~28.64%,平均贡献率为13.96%±8.62%,牡蛎养殖已经对桑沟湾底质造成了一定的影响。     

Frequency analysis across the drowning of a Lower Jurassic carbonate platform: The Calcare Massiccio Formation (Apennines,Italy)

This work illustrates the evolution the Lower Jurassic shallow-water carbonates known as the Calcare Massiccio Formation in the Central Apennines (Italy). The Calcare Massiccio is characterized by lateral and vertical variability in the facies associations, related to an articulated physiography of the Triassic to Lower Jurassic carbonate platform and to its tectonic evolution. This work documents the depositional environment changes during the platform evolution. Quantitative analysis on samples collected from three stratigraphic sections were performed through the Calcare Massiccio succession allowed up to the overlying Pliensbachian pelagites. Two type of carbonate sedimentation have been recognized: in the peritidal and shallow subtidal environments (Calcare Massiccio A) the carbonate production is dominated by microbial activity, while the carbonate sedimentation in a deeper environment of middle to outer ramp (Calcare Massiccio B), is dominated by a bioclastic sedimentation.The evolution from the Calcare Massiccio A to the B can be interpreted as the product of increase of accommodation that in turn produced a backstepping of carbonate facies belt, the photic microbial dominated peritidal facies developed on the persistent Latium-Abruzzi Platform while the bioclastic carbonate production factory settled on the structural highs resulting from the dismembering of the platform by syn-sedimentary tectonic.The bioclastic carbonate factory was not efficient in filling the available accommodation space produced by Sinemurian extensional tectonic. This inefficiency was amplified by the restricted area available for this factory in the small structural highs. These conditions were sufficient to predispose the platform to the drowning without invoke change in the trophic resource or change in the palaeoceanography.     

Tectonic evolution of the internal sector of the Central Apennines, Italy

A wide sector of the internal portion of the Central Apennines, which comprises the southern Lepini Mtns up to the northern Simbruini Mtns has been investigated through detailed field mapping and integrated with structural analyses. A few small productive oil fields and a large number of hydrocarbon seeps and oil impregnations are located in this sector. This area offers good opportunities for testing the use of structural fieldwork methodologies in order to highlight oil migrating paths, from Triassic source rocks, and prospecting chances for oil field exploitation.The main stages of the structural evolution of the area took place after deposition of the foredeep sediments (Frosinone Fm.), i.e. after Late Tortonian, under a stress field characterised by a NE–SW trending σ₁, which was responsible for the early emplacement of major thrust faults present in the area. The Messinian-Early Pliocene thrust-top basin deposits allowed the reconstruction of an in-sequence evolution of the thrust system. The development of out-of-sequence thrusting post-dates these structures leading to a further strong shortening phase in the area during the Pliocene. This phase is characterised by a roughly NNE–SSW trending σ₁. Some peculiar tectonic features evidenced by thrust faults with younger-over-older relationships and an inversion of the original stacking of thrust sheets developed during this phase.Successively, a block-faulting tectonic, mainly with NE–SW extension stress field, occurred and dismembered the compressive tectonic edifice.Later on up to the Middle Pleistocene, N–S to NNE–SSW trending dextral strike-slip faults also acted in the area. Associated to the strike-slip tectonics are local volcanic centres as well as necks, whose compositions show a mantle origin, thus indicating deep seating and a possible lithospheric significance of these structures.In the light of this study, the reduced extension of the productive oil area as well as the spotting of oil seeps, may indicate that the migration conditions are not tied to well defined structures but that likely the cross-cutting points among structures facilitate the conditions for an upwards rising of oil. These conditions in particular are achieved at least in two cases: (1) where the Late Triassic source rocks do not have great depth due to normal or reverse faults, or (2) at a major depth when encountered by transcurrent-oblique roughly N–S trending faults—in both cases oil can easily migrate along the damage zone associated to the fault plane.     

Riverine dominance of a nearshore marine demersal food web: evidence from stable isotope and C/N ratio analysis

The Thukela Bank, KwaZulu-Natal, supports a diverse ecosystem and South Africa’s only prawn fishery. Oceanographic studies suggest riverine input is not important for the biology of this system, whereas biological studies suggest the contrary, with prawn catches increasing with increased fluvial run-off. The aim of this study was to determine (i) the importance of riverine and marine organic matter for the Thukela Bank food web; and (ii) whether there are seasonal changes in the Thukela River stable isotope values, and, if so, whether these are reflected in the isotope values of demersal organisms. Estuarine organic matter, sediments and demersal organisms were collected from several sites across the bank in the wet and dry seasons of 2008, 2009 and 2010. Marine particulate organic matter was also collected in 2010 and analysed for δ13C and δ15N, as well as C/N ratios. There were strong seasonal changes in isotopic values of organic matter and fauna, especially faunal δ13C. There was an apparent time-lag in organisms assimilating riverine organic matter isotopic values, with the isotopic signature of demersal organisms reflecting that of riverine organic matter from the previous season, which is likely the result of tissue turnover time. In 2010, Thukela Bank sediment organic matter was of riverine origin and this maintained the demersal food web. We conclude that Thukela River organic matter is an important input to the food web of the Thukela Bank, indicating that any future damming of the catchment area could have serious consequences for this ecosystem.     

Stratigraphic and provenance evolution of the Southern Apennines foreland basin system during the Middle Miocene to Pliocene (Irpinia-Sannio successions,Italy)

The paper deals with original stratigraphic, petrographic and structural data concerning the evolution of the southern Apennines chain (Italy). The main Langhian to Pliocene deposits cropping out in the northern sector of the southern Apennines foreland basin system (Sannio-Irpinia area) have been studied and correlated in order to document the effects of tectonic changes on the evolution of sandstone detrital modes and stratigraphic architecture. The studied sandstone units can be grouped in five key intervals: a) Numidian Flysch, mostly formed by Langhian mature quartzarenitic deposits and conformable Serravallian post-Numidian successions, formed by arkosic and calciclastic arenaceous-pelitic beds (foreland depozones); b) Langhian to Tortonian San Giorgio Fm., mostly composed of quartzofeldspatic sandstones (foredeep depozone); c) Tortonian to Early Messinian, quartz-feldspatic and partly sedimentary-carbonatoclastic petrofacies, thrust-top successions (Vallone Ponticello, Villanova del Battista and San Bartolomeo fms.); d) Late Messinian quartzolithic to quartzofeldspatic sandstones (Torrente Fiumarella, Anzano Molasse and Tufo-Altavilla unit), which can be referred to infilled thrust-top basins; e) unconformity-bounded Pliocene quartzofeldspatic sandstone strata (wedge-top depozones), characterized by synsedimentary tectonic activity.Detrital modes of the Serravallian through Middle Pliocene sandstones of the southern Apennines foreland basin system testify clear provenance relations from the accreted terranes forming the southern Apennine thrust-belt. The studied clastics show almost the same blended (quartz-feldspatic) composition; this condition could be related to the tectonic transport over thrust ramp of source rocks, as suggested by the tectonic evolutionary model. This study, dealing with sedimentary provenance analysis and tectonostratigraphic evolution, provides an example of the close relations between clastic compositions and foreland basin system development in southern Apennines.     

Organic matter origin and distribution in suspended particulate materials and surficial sediments from the western Adriatic Sea (Italy)

In this study, organic carbon (OC), total nitrogen (TN), stable carbon isotopic (δ¹³C_OC) and CuO reaction product compositions were used to identify the sources of organic matter (OM) and to quantify the relative importance of allochthonous and autochthonous contributions to the western Adriatic Sea, Italy. Suspended particulate material (195 samples) and surficial sediments (0–1 cm, 70 samples) from shallow cross-shelf transects were collected in February and May 2003, respectively. Vertical water column profiles were acquired along the same transects. Data include depth, potential temperature, salinity, density and chlorophyll fluorimetry.Along the western Adriatic shelf in the near-shore region, the phytoplankton growth was influenced by dynamics of the buoyant plumes from the Po and Appennine rivers. A small amount of very fine terrigenous material remained suspended within the coastal current and was exported southward along the shelf to the slope. High variability in the bulk composition was detected in the Po prodelta surficial sediments, whereas the western Adriatic shelf, although a larger area, exhibited a narrower range of values.A significant decoupling was observed between suspended particles in the water column and surficial deposits. The organic material collected in the water column was compositionally heterogeneous, with contributions from marine phytoplankton, riverine–estuarine phytoplankton and soil-derived OM. Frequent physical reworking of surficial sediments likely leads to the efficient oxidation of marine OC, resulting in the observed accumulation and preservation of refractory soil-derived OC delivered by the Po and Appennine rivers.     

Assessment of a Sr isotope vital effect (87Sr/86Sr) in marine taxa from Lee Stocking Island, Bahamas

Data from Lee Stocking Island, Bahamas, confirms the hypothesis that there are no vital effects with the uptake of Sr isotopes (⁸⁷Sr/⁸⁶Sr) at the present mass spectrometer resolution [±2×10^?5 (2σ)]. Our data set contains analyses of 40 samples derived from 37 different calcareous taxa inhabiting a wide range of carbonate subenvironments (i.e., reefal, intertidal, supratidal, mangrove). The mean value of our analyses was 0.709179 with a standard deviation of 2.4×10^?5 (2σ) which was very close to the long-term uncertainty of the strontium isotope methodology [±2.0×10^?5 (2σ)] and to the widely reported ⁸⁷Sr/⁸⁶Sr value of seawater, which clusters around 0.709175.     

Assessment of a Sr isotope vital effect (87Sr/86Sr) in marine taxa from Lee Stocking Island, Bahamas

 Data from Lee Stocking Island, Bahamas, confirms the hypothesis that there are no vital effects with the uptake of Sr isotopes (⁸⁷Sr/⁸⁶Sr) at the present mass spectrometer resolution [±2×10^-5 (2σ)]. Our data set contains analyses of 40 samples derived from 37 different calcareous taxa inhabiting a wide range of carbonate subenvironments (i.e., reefal, intertidal, supratidal, mangrove). The mean value of our analyses was 0.709179 with a standard deviation of 2.4×10^-5 (2σ) which was very close to the long-term uncertainty of the strontium isotope methodology [±2.0×10^-5 (2σ)] and to the widely reported ⁸⁷Sr/⁸⁶Sr value of seawater, which clusters around 0.709175. Received: 14 October 1997 / Revision received: 20 March 1998     

Heavy metals in marine sediments of Taranto Gulf (Ionian Sea, Southern Italy)

Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Ti and Zn concentrations have been determined in surface sediment samples collected in the Taranto Gulf (Ionian Sea, Southern Italy) in order to evaluate their levels and spatial distribution in this important area of the Mediterranean Sea. For various metals, the geoaccumulation index has been calculated as a criterion to assess if their concentrations represent contamination levels or can be considered as background levels. The results show that metals concentrations in sediments can be considered near the background levels found in the Mediterranean Sea.Analytical results have been elaborated by using a Geographical Information System (GIS) software to show metals accumulation areas. Using multivariate statistical analysis, we evaluate the possibility to distinguish the sampling stations, in relation to their geographical position. Results have showed metals distribution in the Taranto Gulf is principally influenced by industrial and urban wastes, located mostly in the northern coastal area of the Ionian Sea. Rivers in the Basilicata region and prevailing anticlockwise marine currents are further factors influencing metal accumulation in sediments.     

Petrographic evidence of the past occurrence of gas hydrates in the Tertiary Piedmont Basin (NW Italy)

Methane-derived rocks in Monferrato and the Tertiary Piedmont Basin (NW Italy) consist of seep carbonates, formed by gas seepage at the seafloor, and macroconcretions resulting from the cementation of buried sediments crossed by gas-rich fluids. These rocks are characterized by both negative δ¹³C values and a marked enrichment in δ¹⁸O. Petrographic features not commonly described and that point to enigmatic depositional and diagenetic conditions have been observed in both types of rocks: inhomogeneous distribution of cements within cavities; dolomite crystals floating within cavity-filling calcite spar; non-gravitational fabrics of internal sediments plastering cavity walls; open framework within microbial crusts. These features suggest the former presence of gas hydrates in sediments. During their dissociation, new space was formed and filled with authigenic carbonates or injected sediments. Analogous mechanisms of clathrate freeze-and-thaw processes have been inferred for the genesis of zebra and stromatactis structures and particular kinds of carbonate breccias. The term melt-seal structure is proposed for this kind of diagenetic structure. The fabrics of gas hydrates and the geochemical conditions of sediments, in turn depending on the relative rates of supply of methane-rich fluids and normal seawater, conditioned the final aspect of the rocks.     

Impact of early dolomitization on multi-scale petrophysical heterogeneities and fracture intensity of low-porosity platform carbonates (Albian-Cenomanian,southern Apennines,Italy)

Petrographic, petrophysical and fracture analyses were carried out on middle Cretaceous platform carbonates of the southern Apennines (Italy) that represent an outcrop analogue of the Val d’Agri and Tempa Rossa reservoirs of the Basilicata region. The studied outcrops, which are made of interlayered limestones and dolomites of inner platform environment, were selected to study the impact of dolomitization on reservoir properties and the control of dolomite texture on fracture development. Two types of dolomites – both formed during very early diagenesis – were found interlayered, at a metre scale, with micrite-rich limestones (mainly mudstones and wackestones). Dolomite A is fine-to medium crystalline and makes non-planar mosaics. Dolomite B is coarse-crystalline and makes planar-s and planar-e mosaics. The intercrystalline space of the planar-e subtype of dolomite B is either open or filled by un-replaced micrite or by late calcite or saddle dolomite cement. Dolomite A and dolomite B have similar average porosities of 3.7 and 3.1% respectively, which are significantly higher than the average porosity of limestones (1.4%). Their poro-perm relationships are similar, with the notable exception of planar-e type B dolomites, which generally display higher permeability values.The intensity of top bounded fractures is distinctly lower in coarse-crystalline dolomites than in fine-crystalline dolomites and limestones, both at the macro- and the micro-scale. On the other hand neither lithology (i.e. limestone vs. dolomite) nor dolomite crystal size control the intensity of perfect bed-bounded fractures, which is strictly controlled by the fracture layer thickness.Our results provide information that could be used as guidance for the characterization and modelling of fractured carbonate reservoirs made of interlayered limestones and dolomites.     

Stable isotope composition of modern bryozoan skeletal carbonate from the Otago Shelf,New Zealand

The oxygen (δ¹⁸O) and carbon (δ¹³C) isotope ratios of 10 species of living Bryozoa collected from the Otago Shelf, New Zealand were analysed to assess the extent to which isotopic equilibrium (relative to inorganic equilibrium isotope fractionation) is attained during the precipitation of skeletal calcium carbonate. The data reveal that whereas eight species of Bryozoa synthesise skeletal carbonate in apparent oxygen isotope equilibrium with respect to environmental conditions, two species (Celleporina grandis and Hippomonavella flexuosa) yield δ¹⁸O_calcite values which indicate significant disequilibrium oxygen isotope fractionation during calcification. Sufficient data are available from one species (C. grandis) to demonstrate that disequilibrium is probably related to kinetic factors associated with diffusion‐controlled transport of HCO₃‐ to the site of calcite precipitation. Carbon isotope signatures indicate significant departures from inorganic isotope equilibrium in all but one bryozoan species (Hippomenella vellicata). Although greater uncertainties are associated with estimates of the isotopic composition of total dissolved inorganic carbon (δ¹³C_SDIC), the data suggest that two factors—kinetic fractionation and incorporation of respiratory CO₂—are important in controlling carbon isotope disequilibrium. Where bryozoan species exhibit evidence for disequilibrium in both oxygen and carbon isotope systems (C. grandis, H. flexuosa), it is likely that kinetic factors are primarily responsible for observed departures from carbon isotope equilibrium. In contrast, the probable explanation for those species which display evidence for carbon isotope disequilibrium only, is that skeletal carbonate is precipitated from a DIC pool modified by the incorporation of respiratory CO₂. Differences between the carbon isotope composition of skeletal elements from the same species and co‐existing species living in the same community suggests that significant variations may occur in the extent to which marine DIC and respiratory CO₂ are utilised during calcification. Additional studies of carbon pathways associated with calcification are required to assess the relative effects of kinetic, metabolic, and environmental factors on the carbon isotopic composition of bryozoan skeletal carbonate.     

Generating the evidence for marine fisheries policy and management

The uptake of research in marine fisheries management and policy making depends on how effectively fisheries managers, researchers and scientific advisers communicate the needs for evidence, and the results and policy implications of research. The MariFish network of the major European funders of marine fisheries has therefore undertaken a study of current practices relating to communication of research needs and results, identifying strengths and weaknesses, and consequently how two-way communications, and hence the effectiveness of generating evidence for marine fisheries policy making and management, can be improved. Conclusions and recommendations for ‘good practice’ include the importance of building good relationships and trust between researchers and fisheries managers, the need for fisheries ministries to have sufficient inhouse scientific capacity to act as ‘intelligent customers’, and the key role of interpreters of research whose skills and career paths need to be carefully developed.     

Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone, Ligurian Apennines, Italy

The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km. Margin setting represents fan and/or source area     

Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone,Ligurian Apennines,Italy

The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km.     

The origin of the suspended particulate matter in the seagrass meadow of tropical waters, an evidence of the stable isotope signatures

Suspended particulate matter (SPM) has been known as an important variable in the organic matter flow of coastal ecosystem. Half of burial carbon in seagrass meadows is contributed by allochthonous sources that compose the SPM such as phytoplankton, seagrass detritus, marine snow aggregates and terrestrially derived particles. Each composition of the SPM contributes different roles and is important to be identified, for instance, the exact contribution of seagrass detritus will be useful for determination of carbon export through the detritus form in seagrass meadows. Here, the SPM of seagrass meadows is studied in Bintan Island and the Selayar Archipelago. The aim of this research is to determine the source origin of the SPM using a stable isotope signature. In order to fulfill this aim, the objectives are defined as: (1) to specify the stable isotope signature (δ¹³C and δ¹⁵N) of the SPM, and (2) to determine the proportional distribution of the SPM''s prospectus sources. The result shows that the possibility of the source origin of the SPM includes a seagrass fraction (Enhalus acoroides and Thalassia hemprichii), terrestrial C4 plant, macroalgae, and terrestrial C3 plant. The SPM lies between the marine- and terrigenous-end members. However, it seems that the SPM is more to be terrigenous-end and allochthonous. According to a Bayesian mixing model, the terrestrial C4 has the highest contribution of the SPM at all sites except Barugaia and Pasi Island in Selayar (i.e., the highest contribution of the SPM is from the detritus of E. acoroides). The second contribution has been contributed by either seagrass detritus (E. acoroides or Th. hemprichii) or terrestrial C3 plant. The finding of this study indicates that there is a strong influence of the terrigenous sources in the SPM of the seagrass meadows.