Levee morphology and sedimentology along the lower Tuross River, south-eastern Australia

Levees on the lower Tuross River in south-eastern Australia reflect a complex interplay between depositional and erosional processes. Stream power, conditioned primarily by valley width, is the key determinant of levee morphology and sedimentology in this confined valley setting. Three styles of levee are described. The Rewlee levee is functionally linked to a flood channel in narrow valley settings (< 250 m). These levees contain a diverse facies assemblage characterized by various scales of erosion surfaces. Vertical accretion on levees has produced conditions under which stream power values exceed the threshold for catastrophic floodplain stripping. The levee at the Mortfield site is associated with less confined settings (valley width 500–600 m), which present lower flood stage and stream power conditions. This levee hosts a wide range of facies, but erosion surfaces are seldom observed. In the more open valley setting at the Central site (valley width 700–1000 m), levees comprise uniform, fine-grained deposits, which grade to pronounced distal floodplains with backswamps. As levees reflect a combination of within-channel and overbank processes, both depositional and erosional, these geomorphic features influence the character and sedimentology of adjacent landforms and the associated alluvial architecture of the basin.     

Limits of sediment transfer in an alpine debris-flow catchment,Illgraben, Switzerland

The 9.5 km² Illgraben catchment, located in the Rhône valley in the Central Alps of Switzerland, is one of the most active debris flow torrents in the Alps. In this paper we present sediment yield data collected in 2006 for segments where hillslopes and channels form a fully connected network and contrast these with sediment yields measured for disconnected hillslopes. The data reveal that sediment yields are 1–2 orders of magnitude larger in segments where hillslopes are connected with the channel network than on disconnected hillslopes. Support for this conclusion is provided by observations made on 1959, 1999 and 2004 aerial photographs that the vegetation cover in the disconnected segments is still intact, whereas denudation rates of several centimeters per year in the connected segments have inhibited the establishment of a stable vegetation cover. Furthermore, sediment supplied from hillslopes during the past 40 years has temporarily accumulated along the Illgraben channel, indicating that the channel aggraded over this period and has not yet recovered. An implication of this observation is that initiation of debris flows in the Illgraben catchment is limited more by the availability of intense rainfall than sediment. In contrast, on disconnected hillslopes, sediment flux does not appear to be driven by precipitation.The petrographic composition of the Illgraben fan deposits indicates two distinct sediment sources, one related to rockfall and the other to landslides and debris flows. The presence of clasts from both sources implies multiple processes of erosion, deposition, mixing and re-entrainment in the catchment before the material is exported to the Illgraben fan and to the Rhône River. In addition, delivery of large amounts of coarse-grained sediment to the Rhône causes a modification of the flow pattern from meandering or anastomosing upstream to braided downstream. Hence, the direct connectivity between hillslope and channelized processes in the Illgraben catchment causes not only rapid topographic modifications in the catchment, but also morphologic adjustment in the Rhône valley downstream.     

Linking submarine channel–levee facies and architecture to flow structure of turbidity currents: insights from flume tank experiments

Submarine leveed channels are sculpted by turbidity currents that are commonly highly stratified. Both the concentration and the grain size decrease upward in the flow, and this is a fundamental factor that affects the location and grain size of deposits around a channel. This study presents laboratory experiments that link the morphological evolution of a progressively developing leveed channel to the suspended sediment structure of the turbidity currents. Previously, it was difficult to link turbidity current structure to channel–levee development because observations from natural systems were limited to the depositional products while experiments did not show realistic morphodynamics due to scaling issues related to the sediment transport. This study uses a novel experimental approach to overcome scaling issues, which results in channel inception and evolution on an initially featureless slope. Depth of the channel increased continuously as a result of levee aggradation combined with varying rates of channel floor aggradation and degradation. The resulting levees are fining upward and the grain‐size trend in the levee matches the upward decrease in grain size in the flow. It is shown that such deposit trends can result from internal channel dynamics and do not have to reflect upstream forcing. The suspended sediment structure can also be linked to the lateral transition from sediment bypass in the channel thalweg to sediment deposition on the levees. The transition occurs because the sediment concentration is below the flow capacity in the channel thalweg, while higher up on the channel walls the concentration exceeds capacity resulting in deposition of the inner levee. Thus, a framework is provided to predict the growth pattern and facies of a levee from the suspended sediment structure in a turbidity current.     

Outcrop-scale acoustic facies analysis and latest Quaternary development of Hueneme and Dume submarine fans, offshore California

The uppermost Quaternary deposits of the Hueneme and Dume submarine fans in the Santa Monica Basin have been investigated using a closed-spaced grid of boomer seismic-reflection profiles, which give vertical resolution of a few tens of centimetres with acoustic penetration to 50 m. Acoustic facies integrated with geometry define six architectural elements, some with discrete subelements that are of a scale that can be recognized in outcrops of ancient turbidite systems. In the Santa Monica Basin, the relationship of these elements to fan morphology, stratigraphy and sediment source is precisely known.
The width of upper Hueneme fan valley has been reduced from 5 km since the last glacial maximum to 1 km at present by construction of laterally confined sandy levees within the main valley. The middle fan comprises three main subelements: thick sand deposits at the termination of the fan valley, low-gradient sandy lobes typically 5 km long and < 10 m thick, and scoured lobes formed of alternating sand and mud beds with many erosional depressions. The site of thickest lobe sediment accumulation shifts through time, with each sand bed deposited in a previous bathymetric low (i.e. compensation cycles). The lower fan and basin plain consists of sheet-like alternations of sand and mud with shallow channels and lenses.
Variations in the rate of late Quaternary sea level rise initiated changes in sediment facies distribution. At lowstand, and during the approximately 11 ka stillstand in sea level, the Hueneme Fan was fed largely by hyperpycnal flow from the Santa Clara River delta, depositing high sediment waves on the right hand levee and thick sandy lobes on the middle fan. At highstand of sea level, most turbidity currents were generated by failure of silty prodelta muds. In contrast, the smaller Dume Fan was apparently always fed from littoral drift of sand through a single-canyon point source.     

Channel formation by flow stripping: large-scale scour features along the Monterey East Channel and their relation to sediment waves

The Monterey East system is formed by large‐scale sediment waves deposited as a result of flows stripped from the deeply incised Monterey fan valley (Monterey Channel) at the apex of the Shepard Meander. The system is dissected by a linear series of steps that take the form of scour‐shaped depressions ranging from 3·5 to 4·5 km in width, 3 to 6 km in length and from 80 to 200 m in depth. These giant scours are aligned downstream from a breech in the levee on the southern side of the Shepard Meander. The floor of the breech is only 150 m above the floor of the Monterey fan valley but more than 100 m below the levee crests resulting in significant flow stripping. Numerical modeling suggests that the steps in the Monterey East system were created by Froude‐supercritical turbidity currents stripped from the main flow in the Monterey channel itself. Froude‐supercritical flow over an erodible bed can be subject to an instability that gives rise to the formation of cyclic steps, i.e. trains of upstream‐migrating steps bounded upstream and downstream by hydraulic jumps in the flow above them. The flow that creates these steps may be net‐erosional or net‐depositional. In the former case it gives rise to trains of scours such as those in the Monterey East system, and in the latter case it gives rise to the familiar trains of upstream‐migrating sediment waves commonly seen on submarine levees. The Monterey East system provides a unique opportunity to introduce the concept of cyclic steps in the submarine environment to study processes that might result in channel initiation on modern submarine fans.     

Processes of late Quaternary turbidity current flow and deposition on the Var deep-sea fan, north-west Mediterranean Sea

High-resolution seismic boomer profiles, with a vertical resolution of less than 1 m, together with piston cores and previous side-scan sonar data, are used to describe late Quaternary sedimentation on the Var deep-sea fan. Chronological control is provided by foram biostratigraphy and radiocarbon dating in cores, and is extended over the fan by seismic correlation. Regional erosional events correspond to the oxygen isotopic stage 2 and 6 glacial maxima. Cores and seismic data define a widespread surface sand layer that is correlated with prodelta failure in 1979 and subsequent submarine cable breaks. Numerical modelling constrains the character of this 1979 turbidity current. It originated from a relatively small slide on the upper prodelta that put sufficient material in suspension to form an accelerating turbidity current which eroded sand from the Var Canyon. The turbidity current was only 30 m thick on the Upper Valley, but experienced significant flow expansion in the Middle Valley to thicknesses of more than 120 m, where it spilled over the eastern Var Sedimentary Ridge at a velocity of about 2·5 m s^?1. Other Holocene turbidity currents (with a recurrence interval of 1000 years) were somewhat muddier and thicker, but also deposited sand on the levees of the Middle Valley, and are inferred to have had a similar slide-related origin. Late Pleistocene turbidity currents deposited thick mud beds on the Var Sedimentary Ridge. The presence of sediment waves and the mean cross-flow slope inferred from levee asymmetry indicates that some of these flows were many hundreds of metres thick and flowed at velocities of about 0·35 m s^?1. This contrast with Holocene turbidites suggests that a slide origin is unlikely. Estimated times for deposition of thick mud beds on the levees are many days to weeks. The Late Pleistocene flows may therefore result from hyperpycnal flow of glacial outwash in the Var River. The variation in the Late Pleistocene to Holocene turbidite sedimentation is controlled more by variations in sediment supply than by sea-level change.     

Geomorphological records of a ‘flood-dominated regime’ in the Rhône Delta (France) between the 1st century BC and the 2nd century AD. What correlations with the catchment paleohydrology?

In the Rhône Delta, numerous paleoenvironmental indicators coming from geomorphology, sedimentology, paleoecology and archeology provide evidences of remarkable hydrological regime change at the beginning of the Roman Antiquity. A significant reinforcement in the Rhône Riverˈs competence is indicated by the increase in grain size of the sediments deposited in the floodplain, within the immediate proximity of the channel. Increase in the fluvial sediment yield is indicated by the increase in rate of sedimentation in the floodplain. Increase in water levels is indicated by the deposition of hydromorphous facies, the development of hydrophytic species, and the decrease in activity of terrestrial lombricoids in the floodplain. Numerous crevasse splays were formed by short-term avulsions of the Rhône River between the first century BC and the AD first century. Their frequency is related to an increase of Rhône River paleodischarge, which makes the channel network incapable of evacuating large volumes of water brought in by the river. The littoral zone experienced a phase of progradation between the AD 1st and the 3rd centuries, in relation to the increase of terrigenous deposits coming from the Rhône of Ulmet. The increase in solid discharge, in the flood-dominated regime (FDR) context, can be related to the overall increase in detrital output from the catchment. The Rhône Delta rather appears in phase with the northern Alps and Massif Central from the 1st century BC to the AD 1st century. The FDR at the beginning of the Christian era contrasts with the drought-dominated regime (DDR) and the reduction of torrential rainfall in the Mediterranean and south Alpine areas. These observations allow to confirm the hydroclimatic limit which could distinguish the southern part of the catchment (Provence, Durancian Alps) from the rest of the Rhône basin.     

Geomorphological records of a ‘flood-dominated regime’ in the Rhône Delta (France) between the 1st century BC and the 2nd century AD. What correlations with the catchment paleohydrology?

Abstract

In the Rhône Delta, numerous paleoenvironmental indicators coming from geomorphology, sedimentology, paleoecology and archeology provide evidences of remarkable hydrological regime change at the beginning of the Roman Antiquity. A significant reinforcement in the Rhône River's competence is indicated by the increase in grain size of the sediments deposited in the floodplain, within the immediate proximity of the channel. Increase in the fluvial sediment yield is indicated by the increase in rate of sedimentation in the floodplain. Increase in water levels is indicated by the deposition of hydromorphous facies, the development of hydrophytic species, and the decrease in activity of terrestrial lombricoids in the floodplain. Numerous crevasse splays were formed by short-term avulsions of the Rhône River between the first century BC and the AD first century. Their frequency is related to an increase of Rhône River paleodischarge, which makes the channel network incapable of evacuating large volumes of water brought in by the river. The littoral zone experienced a phase of progradation between the AD 1st and the 3rd centuries, in relation to the increase of terrigenous deposits coming from the Rhône of Ulmet. The increase in solid discharge, in the flood-dominated regime (FDR) context, can be related to the overall increase in detrital output from the catchment. The Rhône Delta rather appears in phase with the northern Alps and Massif Central from the 1st century BC to the AD 1st century. The FDR at the beginning of the Christian era contrasts with the drought-dominated regime (DDR) and the reduction of torrential rainfall in the Mediterranean and south Alpine areas. These observations allow to confirm the hydroclimatic limit which could distinguish the southern part of the catchment (Provence, Durancian Alps) from the rest of the Rhône basin. © 2002 Éditions scientifiques et médicales Elsevier SAS. All rights reserved.     

深水沉积层序特点及构成要素

本文在回顾当前国际上深水沉积研究热点的基础上,结合在墨西哥湾深水研究的成果系统描述了深水沉积的定义、形成机理、深水沉积层序及深水沉积构成要素的特点.深水沉积主要是在重力流作用下深水环境的沉积,主要形成于相对水平面下降和早期上升的时期,主要分布在低位体系域中.深水层序以凝缩段为边界,块状搬运沉积最早形成并直接位于层序界面上,其上被河道-天然堤沉积所覆盖.典型深水沉积的要素主要由河道、天然堤及越岸沉积、板状砂、块状搬运沉积等构成,这些沉积要素时空上有序地分布.深水河道是物源的主要通道和沉积的重要场所,从上游至下游河道弯曲度增加,能量逐渐减弱.侧向迁移明显,垂向上由富砂的顺直河道演化为相对富泥的弯曲河道.天然堤及越岸沉积以泥质为主,天然堤沿河道呈楔状分布,其近端砂岩含量高,地层厚且倾角较陡;远端砂岩含量低,地层薄且平缓,侧向连续性好但垂向连续性差.板状砂主要为深水扇前缘非限制性沉积,可分为块型和层型.块型侧向连续性好,同时垂向连通性高.层型侧向连续性好,垂向连通性差.块状搬运沉积主要是低水位期坡上沉积物失稳形成的各类滑塌体及碎屑流,其对下伏地层侵蚀明显,分布广泛,变形构造常见,可作为油气良好的封盖层.     

Millennial-scale sea-level control on avulsion events on the Amazon Fan

The Late Quaternary Amazon deep-sea fan provides a modern analogue to ancient fan systems containing coarse-grained hydrocarbon reservoirs. Sand lenses deposited within the Amazon Fan, due to abrupt shifts in channel pathways called avulsion events, were drilled as part of ODP Leg 155. The hemipelagic sediment directly on top of the avulsion sands was dated using primarily AMS radio carbon dating. This dating shows that these large sand lobes (1 km³) are triggered by relatively small, millennial scale changes in marine transgression and regression (±5–10 m). Relative sea level also controls the architecture of the Channel–levee distributive systems within the Amazon Fan. For example prior to 22 k calendar years BP there is a tripartite channel system. After 22 ka there is only one active Channel–levee system. Transitions between the multi-channel and single channel configurations are related to variations in the volume of sediment supply resulting in aggradation or erosion of channel floor and levee growth in the canyon-channel transition area. The sensitivity of the Amazon deep-sea Fan sedimentation to relatively small changes in sea level supports one of the central assumptions of the theory of Sequence Stratigraphy. In addition this study demonstrates how traps for hydrocarbons may have been formed in ancient fan systems.     

Submarine channel levee shape and sediment waves from physical experiments

Submarine channel levees aggrade through repeated overspill events from the channel axis. The shape of the levees may therefore reflect some characteristic(s) of the overspilling flow. It has been noted that basin floor levees typically have a relatively low-relief and taper exponentially to their termination; in contrast slope channel levees may be much steeper close to the channel. A simple physical experiment was performed where a surge-like sediment-laden current flowed through a curved channel. Significant overspill occurred and generated a deposit flanking the channel on either side. The experiment was repeated 25 times to build up low-relief channel-levees. It was found that in proximal areas, levees were steep and characterised by power-law decays, a transitional zone of logarithmically thinning levee was found a little further down-channel, followed by exponential decays in medial to distal areas. The style of levee decay is a function of spatial variation in overbank sedimentation rates. Where flows rapidly lose momentum and deposit across the grain-size spectrum, i.e., in proximal areas, levees tend to be steep; farther down the channel, the steep levee slope gives way to a more gradually tapering deposit. In more distal parts of the channel, deposition is directly related to sediment settling velocity (rather than the suspended load exceeding flow transport capacity as is the case in proximal areas), the deposit reflects this with relatively simple exponential thickness decays. Additionally, small-scale sediment waves developed under lee wave conditions on the inner-bend overbank. The waves initially migrated slightly towards the channel, but as the style of overspill evolved due to intra-channel deposition, flows moved out of the lee wave window and sedimentation became out of phase with the wavelength of the features and the topography was healed.     

Fluvial geomorphic features of the Lower Mississippi alluvial valley

The Lower Mississippi Valley (LMV) has been one of the most intensively studied alluvial valleys in the world in terms of it's geological and geomorphic framework and history. A brief outline of the history of the major geological and geomorphological investigations of the LMV is provided. The results of these investigations are discussed in terms of the fluvial geomorphic framework of the valley and the apparent significant changes in the regime of the Mississippi River during the Late Wisconsinan and Holocene stages.

The LMV occupies the broad deep synclinal trough of the Mississippi Embayment which extends from Cairo, Illinois, to the Gulf of Mexico in a slightly sinuous north-south trend. The embayment is filled with a north to south thickening wedge of non-marine and marine sediment ranging in age from Jurassic to Holocene. The major landscapes of the LMV may be considered in four regions: (1) a narrow active meander belt in a broad valley of Late Pleistocene valley train in the northern third; (2) a wide mosaic of interwoven Holocene meander belts in the middle third; (3) a relatively narrow valley of the Atchafalaya Basin bounded on each side by narrow meander belts in the upper part of the lower third; and (4) the broad distributary wedge of the deltaic plain in the southernmost region of the valley. The valley trains vary in age and landform with the oldest occurring as slightly dissected low ridges and the youngest as broad flats separated by shallow interwoven former braided channels. Meander belts formed throughout the Holocene are comprised of low natural levee ridges flanking abandoned courses and bordered by crescent-shaped oxbow lakes and ridge and swale topography. In the middle third of the valley, meander belts are separated by expansive backswamps of very little relief. The deltaic plain is also exceptionally flat, interrupted by the low natural levee ridges of the abandoned deltaic distributaries.

The floodplain of the LMV is a complex mosaic of fluvial features and landscapes within the four landscape regions. Included in this mosaic are abandoned channels and courses, lateral accretion topography of ridges and swales, natural levees, crevasses and crevasse channels, distributary channels, backswamps and rimswamps, alluvial fans and aprons, valley trains (braided stream terraces), lakes and lacustrine deltas, terraces, and the alluvial valley bluff.

Changes in the hydraulic regime of the Lower Mississippi River (LMR) since the Late Pleistocene have played a major role in the development of the landscape of the valley. The most important regime change was the diminishment of the influence of Wisconsinan glaciation in the upper Midwest and the resultant evolution of the Mississippi River from a broad braided outwash channel to a more narrow but sinuous meandering channel at the end of the Pleistocene. During the Holocene, the Mississippi River undoubtedly responded to major climatic changes, rising sea level, tributary stream influence, and possibly tectonism, diapirism, and subsidence through the growth and evolution, and abandonment of it's meander belts and deltas.     

Distributary channels, sand lobes, and mesotopography of Navy Submarine Fan, California Borderland, with applications to ancient fan sediments

The deep-tow instrument package of Scripps Institution of Oceanography provides a unique opportunity to delineate small-scale features of a size comparable to those features usually described from ancient deep-sea fan deposits. On Navy Fan, the deep-tow side-scanning sonar readily detected steep channel walls and steps and terraces within channels. The most striking features observed in side-scan are large crescentic depressions commonly occurring in groups. These appear to be large scours or flutes carved by turbidity currents. Four distinct acoustic facies were mapped on the basis of qualitative assessment of reflectivity of 4 kHz reflection profiles. There is a distinct increase in depth of acoustic penetration, number of sub-bottom reflectors, and reflector continuity from the upper fan-valley to the lower fan. These changes are accompanied by a decrease in surface relief. Navy Fan is made up of three active sectors. The active upper fan is dominated by a single channel with prominent levees that decrease in height downstream. The active mid-fan region or suprafan is where sand is deposited. Well defined distributary channels with steps, terraces, and other mesotopography terminate in depositional lobes. Interchannel areas are rough, containing giant scours as well as other relief. The active lower fan accumulates mud and silt and is without resolvable surface morphology. The morphological features seen on Navy Fan other than levees, interchannel areas, and lobes are principally erosional. The distributary channels are up to 0.5 km wide and 5–15 m deep. Such features, because of their large size and low relief, are rarely completely exposed or easily detectable in ancient rock sequences. Some flute-shaped scours are larger than channels in cross section but many are 5-30 m across and 1-2 m deep. If observed in ancient rocks transverse to palaeo-current direction, they would perhaps be indistinguishable from channels. Surface sediment distribution combined with fan morphology can be used to relate modern sediments to facies models for ancient fan sediments. Gravel and sand occur in the upper valley, massive sand beds in the mid-fan distributary channels, classical complete Bouma sequences on depositional lobes, incomplete Bouma sequences (lacking division a) on the lower mid-fan, and Bouma sequence with lenticular shape or other limited extent on mid-fan interchannel areas and on levees.     

Morphology and Quaternary sedimentation of the Mozambique Fan and environs,southwestern Indian Oceans*

Most of the Quaternary sediments of the Mozambique Fan have been derived from Africa-Madagascar and deposited by turbidity currents in Pleistocene time. Currents caused by movement of the Antarctic Bottom Water also played a significant role in reworking and redepositing sediments along the marginal areas of the fan. The inner or upper Mozambique Fan is characterized by a single, leveed valley. Due to the effects of the Coriolis force, the natural levees to the east of the valley (left, looking downstream) are higher and contain more terrigenous sediments than those to the west of the valley. The sea floor to the west of the valley returns regular hyperbolic echoes as seen on 3·5 kHz echograms, whereas to the east of the valley, the sea floor is relatively smooth. The sediments on the valley floor are coarse-grained (with median grain up to 2 mm) and poorly sorted, and occur often as massive turbidites, interbedded with hemipelagic sediments. Away from the valley, both to the east and the west, the terrigenous sediments are relatively fine-grained and have been deposited as overbank turbidite sequences. We estimate the maximum velocities of the channelized turbidity currents in the upper fan to have been 8–32 ms^?1. The middle fan has several distributary channels with no levees and has a relatively flat sea floor, characterized by lack of acoustic penetration. Thick, sheet-like, turbidite sand beds, deposited primarily by unchannelized turbidity currents, characterize the middle fan. The middle fan grades, towards the margins, into the outer (lower) fan which is relatively free of channels, has good acoustic penetration and contains hemipelagic and pelagic sediments, and thin, fine-sand turbidite and/or contourite beds. A wide zone of sediment waves, formed from the reworking of the turbidity current-fed sediments by the Antarctic Bottom Water, forms part of the outer fan.     

Sedimentology and depositional model for glaciolacustrine deposits in an ice-dammed tributary valley, western Tasmania, Australia

Quaternary sedimentary successions are described from the Linda Valley, a small valley in western Tasmania that was dammed by ice during Early and Middle Pleistocene glaciations. Mapping and logging of exposures suggest that an orderly sequence of deposits formed during ice incursion, occupation and withdrawal from tributary valleys. Four principal sediment assemblages record different stages of ice occupation in the valley. As the glacier advanced, a proglacial, lacustrine sediment assemblage dominated by laminated silts and muds deposited from suspension accumulated in front of the glacier. A subglacial sediment assemblage consisting of deformed lacustrine deposits and lodgement till records the overriding of lake-bottom sediments as the glacier advanced up the valley into the proglacial lake. As the glacier withdrew from the valley, a supraglacial sediment assemblage of diamict, gravel, sand and silt facies formed on melting ice in the upper part of the valley. A lacustrine regression in the supraglacial assemblage is inferred on the basis of a change from deposits mainly resulting from suspension in a subaqueous setting to relatively thin and laterally discontinuous laminated sediments, occurrence of clastic dykes, and increasing complexity of the geometry of deposits that indicate deposition in a subaerial setting. A deltaic sediment assemblage deposited during the final stage of ice withdrawal from the valley consists of steeply dipping diamict and normally graded gravel facies formed on delta foresets by subaqueous sediment gravity flows. The sediment source for the delta, which prograded toward the retreating ice margin, was the supraglacial sediment assemblage previously deposited in the upper part of the valley. A depositional model developed from the study of the Linda Valley may be applicable to other alpine glaciated areas where glaciers flowed through or terminated in medium- to high-relief topography.     

Des « cailloux roulés » basaltiques haut perchés à l’histoire du Rhône : observations et spéculations de Gui de Mortessagnes (1782)

The abbey Gui de Mortessagnes, well known for his contribution to the discovery of the Vivarais-Velay volcanoes (1778), faced with the deposits of basaltic pebbles in the Rhône valley. From its own observations, he emphasized the distribution of these deposits on the left bank, at a higher levels than the modern valley and downstream from Montélimar, thence very far from their roots. The fluvialist theory failing in the explanation, Mortessagnes suggests that a diluvial stream have submerged this country and that later collapses induced the Rhône valley. So, he is joined to neodiluvianist trend but he considered that this deluge event is not unique in the earth history and admits a long age for the earth. From his handwritten notes, we apprehend his work in relation with the concepts that time and in the light of the present geological knowledge on the Rhône valley.     

Sea level controls on the textural characteristics and depositional architecture of the Hueneme and associated submarine fan systems, Santa Monica Basin, California

Hueneme and Dume submarine fans in Santa Monica Basin consist of sandy channel and muddy levee facies on the upper fan, lenticular sand sheets on the middle fan, and thinly bedded turbidite and hemipelagic facies elsewhere. Fifteen widely correlatable key seismic reflections in high-resolution airgun and deep-towed boomer profiles subdivide the fan and basin deposits into time-slices that show different thickness and seismic-facies distributions, inferred to result from changes in Quaternary sea level and sediment supply. At times of low sea level, highly efficient turbidity currents generated by hyperpycnal flows or sediment failures at river deltas carry sand well out onto the middle-fan area. Thick, muddy flows formed rapidly prograding high levees mainly on the western (right-hand) side of three valleys that fed Hueneme fan at different times; the most recently active of the lowstand fan valleys, Hueneme fan valley, now heads in Hueneme Canyon. At times of high sea level, fans receive sand from submarine canyons that intercept littoral-drift cells and mixed sediment from earthquake-triggered slumps. Turbidity currents are confined to ‘underfit’ talweg channels in fan valleys and to steep, small, basin-margin fans like Dume fan. Mud is effectively separated from sand at high sea level and moves basinward across the shelf in plumes and in storm-generated lutite flows, contributing to a basin-floor blanket that is locally thicker than contemporary fan deposits and that onlaps older fans at the basin margin. The infilling of Santa Monica Basin has involved both fan and basin-floor aggradation accompanied by landward and basinward facies shifts. Progradation was restricted to the downslope growth of high muddy levees and the periodic basinward advance of the toe of the steeper and sandier Dume fan. Although the region is tectonically active, major sedimentation changes can be related to eustatic sea-level changes. The primary controls on facies shifts and fan growth appear to be an interplay of texture of source sediment, the efficiency with which turbidity currents transport sand, and the effects of delta distributary switching, all of which reflect sea-level changes.     

Quantitative analysis of variations in depositional sequence thickness from submarine channel levees

Abstract Thickness variations across‐levee and downchannel in acoustically defined depositional sequences from six submarine channel‐levee systems show consistent and quantifiable patterns. The thickness of depositional sequences perpendicular to the channel trend, i.e. across the levee, decreases exponentially, as characterized by a spatial decay constant, k. Similarly, the thickness of sediment at the levee crest decreases exponentially down the upper reaches of submarine channels and can be characterized by a second spatial decay constant, λ. The inverse of these decay constants has units of length and defines depositional length scales such that k^?1 is a measure of levee width and λ^?1 is a measure of levee length. Quantification of levee architecture in this way allowed investigation of relationships between levee architecture and channel dimensions. It was found that these measures of levee e‐folding width and levee e‐folding length are directly related to channel width and relief. The dimensions of channels and levees are thus intimately related, thereby limiting the range of potential channel‐levee morphologies, regardless of allocyclic forcing. A simple sediment budget model relates the product of the levee e‐folding width and e‐folding length to through‐channel volume discharge. A classification system based on the quantitative downchannel behaviour of levee architecture allows identification of a ‘mid‐channel’ reach, where sediment is passively transferred from the through‐channel flow to the levees as an overspilling flow. Downstream from this reach, the channel gradually looses its control on guiding turbidity currents, and the resulting flow can be considered as an unconfined or spreading flow.     

Secondary aspects of the harnessing of the Rhône (not considering the question of energy)

Since a 1921 law the harnessing of the Rhône River from Lyon to the Mediterranean has been directed by a national company composed of the public sector (fromthe valley) as well as of various consumers or distributors of current such as the SNCF or the EDF. This company, the National Company of the Rhône (CNR), was a precursor to the establishment of the TVA in the United States, although it did not begin operations until aftetr the TVA due to prolonged technical negotiations and to the difficulties involved in locating financial support in a period of economic crisis. Even though the utilization of hydraulic power constitutes the prime aim of the CNR, it has also focused on navigation, irration and “other agricultural uses” from the outset. This article will not further discuss the hydro-electric stations on the Rhône which usually supply more than 22% of French hydro-electric output from thirteen stations now in operation (total power is 2,350 MW and annual average output is 13,000 GWh). This paper will treat the question of the nature and importance of the side effects of the harnessing of the Rhône apart from its essential energy function.     

Autocyclic behaviour of fan deltas: an analogue experimental study

Fan deltas are excellent recorders of fan‐building processes because of their high sedimentation rate, particularly in tectonically active settings. Although previous research focuses mainly on allogenic controls, there is clear evidence for autogenically produced storage and release of sediment by flume and numerical modelling that demands further definition of characteristics and significance of autogenically forced facies and stratigraphy. Analogue experiments were performed on fan deltas with constant extrinsic variables (discharge, sediment supply, sea‐level and basin relief) to demonstrate that fan‐delta evolution consists of prominent cyclic alternations of channellized flow and sheet flow. The channellized flow is initiated by slope‐induced scouring and subsequent headward erosion to form a channel that connected with the valley, while the removed sediment is deposited in a rapidly prograding delta lobe. The resulting decrease in channel gradient causes a reduction in flow strength, mouth‐bar formation, flow bifurcation and progressive backfilling of the channel. In the final stage of channel filling, sheet flow coexists for a while with channellized flow (semi‐confined flow), although in cycle 1 this phase of semi‐confined flow was absent. Subsequent autocyclic incisions are very similar in morphology and gradient. However, they erode deeper into the delta plain and, as a result, take more time to backfill. The duration of the semi‐confined flow increases with each subsequent cycle. During the period of sheet flow, the delta plain aggrades up to the ‘critical’ gradient required for the initiation of autocyclic incision. This critical gradient is dependent on the sediment transport capacity, defined by the input conditions. These autogenic cycles of erosion and aggradation confirm earlier findings that storage and release of sediment and associated slope variation play an important role in fan‐delta evolution. The erosional surfaces produced by the autocyclic incisions are well‐preserved by the backfilling process in the deposits of the fan deltas. These erosional surfaces can easily be misinterpreted as climate, sea‐level or tectonically produced bounding surfaces.