Spin-cast ZERODUR mirror substrates of the 8 m class and lightweight substrates for secondary mirrors

For about 20 years SCHOTT has been supplying the glass ceramic ZERODUR, a material with very low thermal expansion. Besides many other applications, ZERODUR is excellently suited for the manufacture of mirror substrates for telescopes. About 80% of all telescopes in the western world with mirror diameters >1.8 m have been equipped with ZERODUR during the last 10 years. The development of modern astronomical telescopes is aimed at larger primary mirrors and lighter secondary mirrors.New techniques have been developed by SCHOTT for manufacture of thin monolithic mirror blanks of more than 8 m in diameter. The development of thin meniscus shaped shells using the spin-casting technique was successfully completed last year. During a test production several mirror substrates up to 4.1 m in diameter and down to 57 mm in thickness could be produced. The know-how has been acquired for the fabrication of mirror substrates of more than 8 m in diameter by the spin-casting technique.SCHOTT has also performed considerable developmental work in the field of lightweighted ZERODUR mirror substrates which can be generated using different techniques: forming of the lightweighted structure during casting, fusion of individual components to a total structure and lightweighting of a massive block by various mechanical machining methods.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.Registered trademark of SCHOTT Glaswerke, Mainz.     

Outline of the JNLT project

The Japanese National Large Telescope (JNLT) is a 7.5 m reflector with a monolithic thin meniscus main mirror, having the candidate construction site on the northwest cone of the Mauna Kea, Hawaii.The present concept of JNLT has the characteristics of a third generation infrared telescope, which should be capable of various observations of high spatial resolution in the optical-infrared region.Although the project is still under examination from the financial and administrative point of view, a wide range of technical studies were carried out by the JNLT Working Group with the collaboration of specialists from the academic and the industrial sectors.Paper presented at the symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Finite element analysis of a meniscus mirror

Finite element analyses were carried out for a 7.5 m meniscus mirror of 20 cm thickness. Calculations were made for deformations of the mirror surface due to the gravity and the effect of a hole through which a lateral supporting mechanism would be installed. Vibrational eigenmodes were also calculated when the mirror is fixed by three axial and three lateral hard points.Paper presented at the symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

The U.S. National 8 m telescope project

The National Optical Astronomy Observatories (NOAO) are planning to buld two 8 m telescopes, one for Mauna Kea, Hawaii, the other for a site in Chile. Optical configurations, primary mirror systems, and the telescope mounting are discussed. A new optical testing method is outlined. The system imaging goal is 0.25 FWHM. Construction could begin in the early 1990's.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.Operated by the Association of Universities for Research in Astronomy Inc., under contract with the National Science Foundation.     

Active optics experiments for thin meniscus mirror

The concept of the active support system for JNLT is summarized. Performance of the force sensor, the optical wavefront analyzer, and the actuator under development for JNLT is reported. The results of a series of active optics experiments carried out by assembling these elements to support, measure, and actively correct a 62 cm thin mirror are described.Paper presented at the symposium on the JNLT and Related Engineering Development, Tokyo, November 29–December 2, 1988.     

A progress report on the design of the 8 m aperture Optical/Infrared Telescope

Progress of the design study carried out y the Instituto de Astrophysica de Canarias and Royal Greenwich Observatory joint project office for an 8 m aperture Optical/Infrared Telescope. This includes the development of an active pneumatic support system for both the radial and axial supports of an 8 m diameter thin meniscus mirror and the investigations of new technology encoding systems.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

A liquid-supported condensation of major minerals in the solar nebula: Evidence from glasses in the Kaba (CV3) chondrite

Glasses, in the Kaba CV3 chondrite, occur as mesostasis in chondrules and aggregates and as inclusions in olivines, both confined or open and connected to the mesostasis. The inclusions in olivine and the glassy mesostasis of aggregates seem to have formed contemporaneously. The confined glass inclusions and open inclusions in olivine were formed during olivine growth and the mesostasis glass during olivine aggregation. All glasses have high trace element contents (10-20×CI) with unfractionated CI-normalized abundances of refractory trace elements. In contrast, V, Mn, Li, and Cr are depleted in all glasses with respect to the refractory trace elements, as is Rb in the glass inclusions in olivine but not in the mesostasis glass. This abundance pattern indicates vapor fractionation and a common condensation origin for both glasses. Glasses of confined glass inclusions in olivine have a SiAlCa-rich composition with a chondritic Ca/Al ratio. Glasses of open glass inclusions and mesostasis are poor in Ca and enriched in alkalis. However, Ca contents of olivines indicate crystallization from a Ca-rich melt of a composition similar to that of the glass inclusions. In addition, trace element abundances indicate that these glasses (liquids) probably had an original composition similar to that of the inclusion glass. They apparently lost Ca in exchange for alkalis in a metasomatic exchange reaction, presumably with the vapor. There is now growing evidence that liquids can indeed condense from a solar nebula gas, provided the gas/dust ratio is sufficiently low. In these regions with enhanced oxygen fugacity as compared to that of a nebula of solar composition, liquids (the glass precursor) probably played an important role in growing crystals from the vapor by liquid-phase epitaxy. The glasses appear to be the remnants of this thin liquid layer interface that supported the growth of olivine from the vapor following the Vapor-Liquid-Solid process. This liquid will have a refractory composition and will have trace element contents which are in equilibrium with the vapor, and, therefore, will not change much during the time of olivine growth. The composition of the liquid seems to be unconstrained by the phases it is in contact with. Samples of this liquid will be retained as glass inclusions in olivine. The glassy mesostasis could also be a sample of this liquid that got trapped in inter-crystal spaces. The mesostasis glass subsequently behaved as an open system and its Ca was exchanged—presumably with the vapor—for the alkali elements Na, K, and Rb. In contrast, glass inclusions in olivine were protected by the host, could not react, and thus preserved the original composition of this liquid.     

A fast tracking mirror for adaptive optics

A piezo driven tilt mirror was developed and built as one component of an image motion compensation system for a solar telescope. The bandwidth of the mirror with a diameter of 60 mm is about 1 kHz with negligible phase shift between input signal and mirror response up to 900 Hz. The tilt range is 1.6 mrad. Special care was taken to maintain the surface quality of the mirror to better than /15 after fixing it to the substrate.     

The performance of the Apache Point Observatory 3.5 m telescope

The Astrophysical Research Consortium 3.5 m telescope facility on Apache Point (2800 m above sea level) near the National Solar Observatory in southern New Mexico is nearing completion. The telescope mount has been installed and testing and fabrication of remaining subassemblies are underway. Thef/1.75 lightweight honeycomb primary mirror was cast April 1988 by the Steward Observatory Mirror Laboratory and is currently being figured.The 3.5 m optical telescope is an altitude over azimuth mechanical structure with Ritchey-Chrétien optics. The lightweight (1800 kg) mirror leads to a mount weighting only 41000 kg; readily available rolling element bearings are used to achieve the necessary performance at low cost and without the heat dissipation of externally pressurized types. Drive torques are applied by DC servo-driven capstans. These are coupled by friction to large diameter drive disks on each axis. No gears are used. Position feedback comes from low cost incremental encoders, also capstan coupled.We have recently completed a series of measurements of the telescope mount. These measurements show that the telescope is very stiff; the lowest natural frequencies are about 7.2 Hz. Initial tracking performance is good and the mount shows high resistance to wind-induced vibration. Our experience during acceptance testing suggests that routine power spectral analysis of drive motor torque and other parameters could be an important tool in the early detection of failures.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Rare gas diffusion studies in individual lunar soil particles and in artificially implanted glasses

The linear heating technique was applied to study the release of solar wind implanted He and Ne in single glass spherules and minerals of lunar soils. In addition, the diffusion of rare gases artificially implanted into simulated lunar glass was investigated. Activation energies derived for lunar glasses are much higher than for virginal glasses of similar chemical composition. Volume diffusion of the lunar surface cannot explain the high retentivity for the trapped gases. It is expermentally shown that various types of radiation damage are of paramount importance to the understanding of the secondary alterations of elemental abundances after solar wind implantation on the lunar surface.Paper dedicated to Prof. Harold C. Urey on the occasion of his 80th birthday on 29 April 1973.     

Some new astronomical facilities in China

For the 1990's, plans for some astronomical facilities and related researchers are being carried out in China. In this report we describe in some details the plans of radio astronomical facilities, 150/220 cm Schmidt telescope, and experiments on porcelain mirror material.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

The design of the Central-Axis Reflector (ZAS)

The Central-Axis Reflector, the design principle which is presented below is a segmented-mirror telescope. The inventions relate mainly to the optical system and to the tracking apparatus.A large number of small individual mirror bodies, ground off-axis (hexagonal/polygonal) produce one primary mirror with closed circular aperture when joined together.The overall design of the tracking apperatus results directly —and thus without unnecessary adornment — from the two planes of to aminimum but which are required for tracking of the telescope.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Structure of the Keck Telescope — An overview

The structure of the Keck Telescope is briefly described. The design required an innovative approach made necessary by the revolutionary nature of the segmented primary mirror, by the very stringent weight and cost limitations, and by observational and operational needs. Analysis of a progressively more detailed computer model predicts that all design objectives will be met, as shown in a summary of performance characteristics. The paper is illustrated with a number of drawings.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2 1988.     

COLLESCIPOLI: AN UNUSUAL FUSION CRUST GLASS

An electron microprobe study was conducted on glass fragments taken from the fusion crust and an internal glass-lined vein in the H-5 chondrite Collescipoli. Microprobe analyses of the glasses revealed an unusual fusion crust composition, and analyses of glass from inside the meteorite showed compositions expected for a melt of an H-group chondrite. Studies of fusion crusts by previous workers, e.g., Krinov and Ramdohr, showed that fusion crusts contain large amounts of magnetite and other oxidized minerals. The Collescipoli fusion crusts do contain these minerals, but they also contain relatively large amounts of reduced metal, sulphide, and a sodium-rich glass. This study seems to indicate that Collescipoli preserved an early type of fusion crust. Oxidation was incomplete in the fusion crust melt that drained into a crack. From this study it is concluded that fusion crust formation does not invariably result in complete oxidation of metal and sulphide phases.     

Can the optical very large array be coupled with the JNLT?

Coupling the JNLT with the Keck telescope is of considerable interest. Further enhancement may be possible with auxiliary small telescopes, as planned for ESO's VLT. Current plans for installing the optical very large array at Mauna Kea provide opportunities for extra OVLA telescopes near the JNLT.A coudé field slicer is proposed for interferometric observing of a reference star together with the main object. Additions to the JNLT coudé spectrograph are also suggested for use as a speckle camera with multiple spectral channels.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Knowledge engineering application in the problem of supporting a large mirror

We propose an application of knowledge engineering in the problem of active supporting for a large mirror. To reduce calculating load and to shorten cycle time, we divide the system hierarchically into a managing central controller and many autonomous local controllers, and use reasoning instead of dynamical analysis. The reasoning is based upon pattern matchings between observed error pattern and test patterns in the knowledge base.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Infrared instruments for JNLT

The principal features of the JNLT as an infrared telescope are presented along with its ultimate performance of detectivity in typical methods of imagery and spectroscopy. Some infrared instruments: infrared camera, grating spectrometer, and Fabry-Pérot-based imager, currently proposed as the first generation instruments are also discussed in relation to the scientific objectives of the JNLT.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Large mirror figuring and testing

We describe a method for figuring and testing large aspheric mirrors using a rectangular, flexible lap (the so-called Membrane Tool) and a vibration stabilized interferometer. The rear side of the lap is covered with computer controlled dynamic pressure actuators which determine the amount of material to be removed for surface error correction. This method has been developed in the laboratory and tested to some extent by figuring thef/2.2 primary of the 3.6 m ESO-NTT. We describe the ongoing developments and the manufacturing plan for 8 m-class mirrors.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

A decade of cost-reduction in very large telescopes (The SST as prototype of special-purpose telescopes)

Many design and technical innovations over the past ten or fifteen years have reduced the costs of very large telescopes by nearly an order of magnitude over those of classical designs. Still a further order of magnitude reduction is possible if the telescope is specialized for on-axis spectroscopy, giving up especially the luxuries of wide field, multiple focal positions, and access to all the sky at will. The SST (Spectroscopic Survey Telescope) with use eighty-five 1 m circular mirrors mounted in a steel frame composed of hundreds of interlocking tetrahedrons, keeping a fixed elevation angle of 60° with rotation only in azimuth. Using an optical fiber it will feed as much light to spectrographs as can be done by a conventional 8 m telescope, yet has a target basic completion cost of only $6 million.Paper presented at the Symposium on the JNLT and Related Engineering Development, Tokyo, November 29–December 2, 1988.     

A purely reflective large wide-field telescope

Two versions of a fast, purely reflective Paul-Baker-type telescope are discussed, each with an 8.4-m aperture, 3° diameter flat field and f/1.25 focal ratio. The first version is based on a common, even asphere type of surface with zero conic constant. The primary and tertiary mirrors are 6th order aspheres, while the secondary mirror is an 8th order asphere (referred to here for brevity, as the 6/8/6 configuration). The D ₈₀ diameter of a star image varies from 0″.18 on the optical axis up to 0″.27 at the edge of the field (9.3–13.5 μm). The second version of the telescope is based on a polysag surface type, which uses a polynomial expansion in the sag z, 1 $$ r^2 = 2R_0 z - \left( {1 + b} \right)z^2 + a_3 z^3 + a_4 z^3 + a_4 z^4 + \ldots + a_N z^N $$ instead of the common form of aspheric surface. This approach results in somewhat better images, with D ₈₀ ranging from 0″.16 to 0″.23, using a lower-order 3/4/3 combination of powers for the mirror surfaces. An additional example with 3.5-m aperture, 3°.5 diameter flat field, and f/1.25 focal ratio featuring near-diffraction-limited image quality is also presented.