Insight into adsorption equilibrium,kinetics and thermodynamics of lead onto alluvial soil

In the present study, adsorption of lead (II) ions from aqueous solution by alluvial soil of Bhagirathi River was investigated under batch mode. The influence of solution pH, sorbent dose, initial lead (II) concentration, contact time, stirring rate and temperature on the removal process were investigated. The lead adsorption was favored with maximum adsorption at pH 6.0. Sorption equilibrium time was observed in 60 min. The equilibrium adsorption data were analyzed by the Freundlich, Langmuir, Dubinin–Radushkevich and Temkin adsorption isotherm models. The kinetics of lead (II) ion was discussed by pseudo first-order, pseudo second-order, intra-particle diffusion, and surface mass transfer models. It was shown that the adsorption of lead ions could be described by the pseudo second-order kinetic model. The activation energy of the adsorption process (E _a) was found to be ?38.33 kJ mol^?1 using the Arrhenius equation, indicating exothermic nature of lead adsorption onto alluvial soil. Thermodynamic parameters, such as Gibbs free energy (?G ⁰), the enthalpy (?H ⁰), and the entropy change of sorption (?S ⁰) have also been evaluated and it has been found that the adsorption process was spontaneous, feasible, and exothermic in nature. The results indicated that alluvial soil of Bhagirathi River can be used as an effective and low cost adsorbent to remove lead ions from aqueous solutions.     

Effect of Fenton process on treatment of simulated textile wastewater: optimization using response surface methodology

A large portion of water is consumed during various textile operations thereby discharging wastewaters with pollutants of huge environmental concern. The treatment of such wastewaters has promising impact in the field of environmental engineering. In this work, Fenton oxidation treatment was engaged to treat simulated textile wastewater. Box–Behnken design and response surface methodology were employed to optimize the efficiency of Fenton process. Iron dose, peroxide dose and pH were considered as input variables while the responses were taken as chemical oxygen demand and color removal. A total of 17 experiments were conducted and analyzed using second-order quadratic model. The quadratic models generated for chemical oxygen demand and color removal efficiencies were validated using analysis of variances, and it was found that the experimental data fitted the second-order model quite effectively. Analysis of variances demonstrated high values of coefficient of determination (R ²) for chemical oxygen demand and color removal efficiencies with values of 0.9904 and 0.9963 showing high conformation of predicted values to the experimental ones. Perturbation plots suggested that the iron dosage produced the maximum effect on both chemical oxygen demand and color removal efficiencies. The optimum parameters were determined as Fe²⁺ dose—550 mg/L, H₂O₂ dose—5538 mg/L, pH—3.3 with corresponding chemical oxygen demand and color removal efficiencies of 73.86 and 81.35%. Fenton process was found efficient in treatment of simulated textile wastewater, and optimization using response surface methodology was found satisfactory as well as relevant. From the present study, it can also be concluded that if this method is used as pretreatment integrated with biological treatment, it can lead to eco-friendly solution for treatment of textile wastewaters.     

Biosorption of ammoniacal nitrogen from aqueous solutions with low-cost biomaterials: kinetics and optimization of contact time

The biosorption of ammoniacal nitrogen (N-NH₄ ⁺) from aqueous solutions by dead biomass of brown seaweed Cystoseira indica and Jatropha oil cake (JOC), which is generated in the process of biodiesel recovery from its seeds, was studied under diverse experimental conditions. The N-NH₄ ⁺ biosorption was strictly pH dependent, and maximum uptake capacity of C. indica (15.21 mg/g) and JOC (13.59 mg/g) was observed at initial pH 7 and 3, respectively. For each biosorbent–N-NH₄ ⁺ system, kinetic models were applied to the experimental data to examine the mechanisms of sorption and potential rate-controlling steps. The generalized rate model and pseudo-second-order kinetic models described the biosorption kinetics accurately, and the sorption process was found to be controlled by pore and surface diffusion for these biosorbents. Results of four-stage batch biosorber design analysis revealed that the required time for the 99 % efficiency removal of 40 mg/L N-NH₄ ⁺ from 500 L of aqueous solution were 76 and 96 min for C. indica and JOC, respectively. The Fourier transform infrared spectroscopy analysis before and after biosorption of ammonium onto C. indica and JOC revealed involvement of carboxylic and hydroxyl functional groups.     

Optimization of ammonia removal by ion-exchange resin using response surface methodology

The ability of ion-exchange resin for ammonia removal from aqueous solution was studied. The results showed that Amberlite ion-exchange resin was effective in removing ammonia from aqueous solution. Factorial design and response surface methodology were applied to evaluate and optimize the effects of pH, resin dose, contact time, temperature and initial ammonia concentration. Low pH condition was preferred with the optimum pH found to be 6. High resin dose generated high removal rate and low exchange capacity. Results of factorial design and response surface methodology showed that temperature was not a significant parameter. The model prediction was in good agreement with observed data (R ² = 0.957). The optimum Q _e was 28.78 mg/g achieved at pH = 6 and initial TAN concentration of 3000 mg/L. The kinetics followed the pseudo-second-order kinetic model (R ² = 0.999). Equilibrium data were fitted to Langmuir and Freundlich isotherm models with Langmuir model providing a slightly better predication (R ² = 0.996). The resin was completely regenerated by 2 N H₂SO₄.     

Adsorption of lead, zinc and cadmium ions from contaminated water onto Peganum harmala seeds as biosorbent

Peganum harmala seeds were assessed as biosorbent for removing Pb²⁺, Zn²⁺and Cd²⁺ ions from aqueous solutions. The effects of various parameters such as the aqueous solution pH, the contact time, the initial metal concentration and the amount of adsorbent in the process were investigated. The adsorption efficiencies increased with pH. It was found that about 95 % of lead, 75 % of zinc and 90 % of cadmium ions could be removed from 45 ml of aqueous solution containing 20 mg l^?1 of each cation with 2 g of adsorbent at pH 4.5 after 15 min. The quantitative desorption of cadmium from adsorbent surface was achieved using 10 ml of a 0.5 M nitric acid solution. This condition was attained for lead and zinc ions with 10 ml of 1 M hydrochloric acid solution. Kinetic investigation of the process was performed by considering a pseudo-second-order model. This model predicts the chemisorption mechanism of the process. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were tested for describing the equilibrium data. It was found that the Freundlich model describes the experimental data resulting from the adsorption of lead ions. However for cadmium and zinc ions, the adsorption equilibria were interpreted with the Langmuir model.     

Chromium(VI) adsorption by <Emphasis Type="Italic">Codium tomentosum</Emphasis>: evidence for adsorption by porous media from sigmoidal dose–response curve

Adsorption of Cr(VI) using native and chemically modified marine green macroalgae Codium tomentosum biomass and its adsorption kinetics were studied under specific conditions. Maximum Cr(VI) removal occurred at pH 2 for both untreated and acid-treated biomass. However, base-treated biomass exhibited maximum adsorption at pH 6 due to the hydrolysis of methyl esters present in the cellulose, hemicellulose and lignin molecules resulting in carboxyl groups (COO^?) on the surface. The effect of adsorbent dose revealed that untreated and acid-treated biomass follows Henry’s linear isotherm, while base-treated biomass exhibited sigmoidal curve indicating energetic heterogeneity on the adsorbing surface. The monolayer adsorption capacity of untreated, acid-treated and base-treated biomasses was 5.032 ± 0.644, 5.445 ± 0.947, 3.814 ± 0.559 mg g^?1, respectively. Adsorption was found to follow Ho and McKay’s pseudo-second-order kinetic model with decreasing pseudo-second-order rate constant (K ₂, g mg^?1 min^?1) of 0.088 ± 0.037 (acid-treated), 0.019 ± 0.003 (untreated) and 0.012 ± 0.003 (base-treated).     

Biosorption of Cr(III) and Cr(VI) species from aqueous solution by Cabomba caroliniana: kinetic and equilibrium study

This study reports the potential ability of non-living biomass of Cabomba caroliniana for biosorption of Cr(III) and Cr(VI) from aqueous solutions. Effects of contact time, biosorbent dosage, pH of the medium, initial concentration of metal ion and protonation of the biosorbent on heavy metal–biosorbent interactions were studied through batch sorption experiments. Cr(III) was sorbed more rapidly than Cr(VI) and the pH of the medium significantly affected the extent of biosorption of the two metal species differently. Surface titrations showed that the surface of the biosorbent is positively charged at low pH while it is negatively charged at pH higher than 4.0. Protonation of the biosorbent increased its capacity for removal of Cr(III), while decreasing that of Cr(VI). FT-IR spectra of the biosorbent confirmed the involvement of –OH groups on the biosorbent surface in the chromium removal process. Kinetic and equilibrium data showed that the sorption process of each chromium species followed pseudo second-order kinetic model and both Langmuir and Freundlich isothermal models. A possible mechanism for the biosorption of chromium species by non-living C. caroliniana is suggested.     

Saraca indica leaf powder for decontamination of Pb: removal, recovery, adsorbent characterization and equilibrium modeling

The present study explores the effectiveness of Saraca indica leaf powder, a surplus low value agricultural waste, in removing Pb ions from aqueous solution. The influence of pH, biomass dosage, contact time, particle size and metal concentration on the removal process were investigated. Batch studies indicated that maximum biosorption capacity for Pb was 95.37% at the pH 6.5. The sorption process followed the first order rate kinetics. The adsorption equilibrium data fitted best to both Langmuir and Freundlich isotherms. Morphological changes observed in scanning electron micrographs of untreated and metal treated biomass confirmed the phenomenon of biosorption. Fourier transform infrared spectroscopy of native and exhausted leaf powder confirmed lead biomass interactions responsible for sorption. Acid regeneration was tried for several cycles with a view to recover the sorbed metal ion and also to restore the sorbent to its original state. The findings showed that Saraca indica leaf powder can easily be envisaged as a new, vibrant, low cost biosorbent for metal clean up operations.     

Removal of uranium(VI) from aqueous solutions using Eucalyptus citriodora distillation sludge

Adsorption and desorption of uranium(VI) from dilute aqueous solutions by Eucalyptus citriodora distillation sludge was studied in a batch mode. The potential of Eucalyptus citriodora distillation sludge to remove uranium(VI) from aqueous solutions has been investigated at different conditions of solution pH, metal ion concentrations, biosorbent dosage, biosorbent particle size, contact time and temperature. The results indicated that biosorption capacity of Eucalyptus citriodora distillation sludge was strongly affected by the medium pH, the biosorbent dose, metal ion concentrations and medium temperature. Reduction in particle size increased the biosorption capacity. Langmuir and Freundlich isotherm models were applied to biosorption data to determine the biosorption characteristics. An optimum biosorption capacity (57.75 mg/g) was achieved with pH 4.0, particle size 0.255 mm, biosorbent dose 0.5 g/100 mL and initial uranium(VI) concentration of 100 mg/L. Uranium(VI) removal by Eucalyptus citriodora distillation sludge was rapid, the equilibrium was established within 60 min and pseudo-second-order model was found to fit with the experimental data. The biosorption process decreased with an increase in the temperature indicating its exothermic nature. Pretreatments of biomass with different reagents affected its biosorption capacity. A significant increase (34 %) in biosorption capacity (83.25 mg/g) was observed with benzene treatment. Fourier-transform infra-red studies showed the involvement of carbonyl, carboxyl and amide groups in the biosorption process. The results indicated that sulfuric acid had the best effects as an eluent showing 93.24 % desorption capacity.     

Significance of co-immobilized activated carbon and Bacillus subtilis on removal of Cr(VI) from aqueous solutions

Batch sorption system using co-immobilized (activated carbon and Bacillus subtilis) beads as adsorbent was investigated to remove Cr(VI) from aqueous solution. Fourier transform infrared spectroscopy analysis showed the functional groups of both bacteria and activated carbon in co-immobilized beads. Experiments were carried out as a function of contact time (5–300 min), initial metal concentration (50–200 mg L^?1), pH (2–8), and adsorbent dose (0.2–1 g L^?1). The maximum percentage of removal was found to be 99 %. Langmuir model showed satisfactory fit to the equilibrium adsorption data of co-immobilized beads. The kinetics of the adsorption followed pseudo-second-order rate expression, which demonstrates that chemisorption plays a significant role in the adsorption mechanism. The significant shift in the Fourier transform infrared spectroscopy peaks and a Cr peak in the scanning electron microscope–energy dispersive spectroscopy spectra further confirmed the adsorption. The results indicate that co-immobilized beads can be used as an effective adsorbent for the removal of Cr(VI) from the aqueous solution.     

Adsorptive removal of textile reactive dye using Posidonia oceanica (L.) fibrous biomass

The Mediterranean seagrass Posidonia oceanica (L.) leaf sheaths were used as low cost, available and renewable biological adsorbent for the removal of reactive textile dye from aqueous solutions. Batch experiments were carried out for sorption kinetics and isotherms. Operating variables studied were temperature, pH and chemical pre-treatment. Biosorption capacity seems to be enhanced by increasing the temperature. Maximum colour removal was observed at pH 5. Pre-treating fibres with H₃PO₄ and HNO₃ solutions increased the adsorption efficiency up to 80 %. Experimental sorption kinetic data were fitted to both Lagergren first-order and pseudo-second-order models and the data were found to follow first-order equation for raw fibres and pseudo-second-order for pre-treated ones. Equilibrium data were well represented by the Freundlich isotherm model for all tested adsorption systems. Besides, the thermodynamic study has showed that the dye adsorption phenomenon onto P. oceanica biomass was favourable, endothermic and spontaneous.     

Hexavalent chromium removal from aqueous solutions by using low-cost biological wastes: equilibrium and kinetic studies

The batch removal of hexavalent chromium from aqueous solutions using almond shell, activated sawdust, and activated carbon, which are low-cost biological wastes under different experimental conditions, was investigated in this study. The influences of initial concentration, adsorbent dose, adsorbent particle size, agitation speed, temperature, contact time, and pH of solution were investigated. The adsorption was solution pH dependent and the maximum adsorption was observed at a solution pH of 2.0. The capacity of chromium adsorption under equilibrium conditions increased with the decrease in particle sizes. The equilibrium was achieved for chromium ion after 30?min. Experimental results showed that low-cost biosorbents are effective for the removal of pollutants from aqueous solution. The pseudo-second-order kinetic model gave a better fit of the experimental data as compared to the pseudo-first-order kinetic model. Experimental data showed a good fit with the Freundlich isotherm model. Changes in the thermodynamic parameters, including Gibbs free energy (??G_o), enthalpy (??H_o), and entropy (??S_o), indicated that the biosorption of hexavalent chromium onto almond shell, activated sawdust, and activated carbon was feasible, spontaneous, and endothermic in the temperature range 28?C50?°C.     

Adsorption of lead, ethylenediaminetetraacetic acid and lead-ethylenediaminetetraacetic acid complex onto granular activated carbon

This study investigated simultaneous removal of lead and ethylenediaminetetraacetic acid from synthetic wastewater samples using granular activated carbon adsorption. Data from a 1 × 10^?4 M lead-ethylenediaminetetraacetic acid adsorption isotherm study fitted well to Freundlich isotherm. Furthermore, for the pH-dependent 1 × 10?4 M lead-ethylenediaminetetraacetic acid study both lead and ethylenediaminetetraacetic acid adsorptions increased reaching values of 82 % and 93 % respectively at pH 5.8. However, a further increase in pH resulted in decreasing but near equal lead and ethylenediaminetetraacetic acid removals. Results for the 2 × ^10?4 M lead-ethylenediaminetetraacetic acid system showed a behavior that was qualitatively similar to the 1 × ^10?4 M lead-ethylenediaminetetraacetic acid findings. However, the 1×10^?3 M lead-ethylenediaminetetraacetic acid study showed only a decreasing adsorption trend. An increasing-decreasing type lead/ethylenediaminetetraacetic acid adsorption behavior was also noted for the 1× 10^?4 M lead/2 × 10^?4 M ethylenediaminetetraacetic acid system. Nevertheless for the 2×10^?4 M lead/1×10^?4 M ethylenediaminetetraacetic acid system, lead removal at increased pH was comparatively higher. Furthermore, results from a continuous column study completed at 1 × 10^?4 M lead and 0.75 × 10^?4 M ethylenediaminetetraacetic acid showed high saturation times both for lead and ethylenediaminetetraacetic acid. Results from the present work show that a notable removal of aqueous phase lead and ethylenediaminetetraacetic acid could be achieved using activated carbon adsorption. The details related to the effect of pH and pollutants’ concentration on the overall adsorption efficiency, as reported in the present work, would be of much use for an effective carbon adsorption process design for the treatment of respective wastewaters.     

A kinetic study of copper cementation with zinc in aqueous solutions

Cementation of copper from zinc containing copper solutions using metallic zinc was studied in this work. The effect of copper, zinc and ammonium chloride concentration, stirring speed, pH and temperature on the cementation of copper was determined. Cementation rate increased with initial copper concentration, stirring speed and temperature. pH variation from 1 to 4 increased the cementation rate but at higher pH, the rate was not significantly effected. The cementation rate of copper increased with Zn²⁺ ion concentration. However, the rate of this rise was slightly less compared to the rise that occurred in the Zn²⁺ ions free copper solution.     

Adsorptive removal of Cu(II) and Pb(II) onto mixed-waste activated carbon: kinetic,thermodynamic, and competitive studies and application to real wastewater samples

This work aimed to investigate the adsorption characteristics, both kinetically and thermodynamically, of Cu(II) and Pb(II) removal from aqueous solutions onto mixed-waste activated carbon, as well as to study the competitive behavior found in mixed heavy metal solution systems. This study shows that activated carbon prepared from mixed waste is an effective adsorbent for the removal of Cu(II) and Pb(II) from aqueous solutions, with the aim of detoxifying industrial effluents before their safe disposal onto water surfaces. The adsorption process was characterized in terms of kinetic and thermodynamic studies. In addition, the influence of presence of Cu(II) and Pb(II) in a competitive system was investigated. The results showed that the maximum adsorption capacities were gained at a pH of 6 with a contact time of 180 min, a metal solution concentration of 300 ppm, and an adsorbent dose of 0.3 g/L. The adsorption process was found to follow a pseudo-first-order kinetic model. Thermodynamic parameters such as ΔG ^o, ΔH ^o, and ΔS ^o showed that the sorption process was spontaneous and endothermic in nature. A competitive study demonstrated the applicability of mixed-waste activated carbon to adsorb Cu(II) and Pb(II) from a solution of mixed metals. In addition, the adsorption capacity was found to be as effective as other adsorbents reported in the literature. The developed adsorptive removal procedure was applied for treatment of real wastewater samples and showed high removal efficiency.     

Heavy metal biosorption potential of a Malaysian Rhodophyte (<Emphasis Type="Italic">Eucheuma denticulatum</Emphasis>) from aqueous solutions

Biosorption is a promising technology for the removal of heavy metals from industrial wastes and effluents. In the present study, biosorption of Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺ onto the dried biomass of Eucheuma denticulatum (Rhodophyte) was investigated as a function of solution pH, contact time, temperature and initial metal ion concentration. The experimental data were evaluated by Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. The sorption isotherm data followed Langmuir and Freundlich models, and the maximum Langmuir monolayer biosorption capacity was found as 81.97, 66.23, 51.02 and 43.48 mg g^?1 for Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺, respectively. The sorption kinetic data followed pseudo-second-order and intraparticle diffusion models. Thermodynamic study revealed feasible, spontaneous and endothermic nature of the sorption process. Fourier transform infrared analysis showed the presence of amine, aliphatic, carboxylate, carboxyl, sulfonate and ether groups in the cell wall matrix involved in metal biosorption process. A total of nine error functions were applied in order to evaluate the best-fitting models. We strongly suggest the analysis of error functions for evaluating the fitness of the isotherm and kinetic models. The present work shows that E. denticulatum can be a promising low-cost biosorbent for removal of the experimental heavy metals from aqueous solutions. Further study is warranted to evaluate its potential for the removal of heavy metals from the real environment.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-loaded porous carbons developed from rice husk for removal of arsenate from aqueous solution

A simple one-step synthetic approach using rice husk has been developed to prepare magnetic Fe₃O₄-loaded porous carbons composite (MRH) for removal of arsenate (As(V)). The characteristics of adsorbent were evaluated by transmission electron microscope, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, and thermogravimetric analysis. On account of the combined advantages of rice husk carbons and Fe₃O₄ nanoparticles, the synthesized MRH composites showed excellent adsorption efficiency for aqueous As(V). The removal of As(V) by the MRH was studied as a function of contact time, initial concentration of As(V), and media pH. The adsorption kinetics of As(V) exhibited a rapid sorption dynamics by a pseudo-second-order kinetic model, implying the mechanism of chemisorption. The adsorption data of As(V) were fitted well to the Langmuir isotherm model, and the maximum uptake amount (q _m ) was calculated as 4.33 mg g^?1. The successive regeneration and reuse studies showed that the MRH kept the sorption efficiencies over five cycles. The obtained results demonstrate that the MRH can be utilized as an efficient and low-cost adsorbent for removal of As(V) from aqueous solutions.     

Removal of cationic dye methylene blue (MB) from aqueous solution by ground raw and base modified pine cone powder

The adsorption capacity of raw and sodium hydroxide-treated pine cone powder in the removal of methylene blue (MB) from aqueous solution was investigated in a batch system. It was found that the base modified pine cone exhibits large adsorption capacity compared with raw pine cone. The extent of adsorption capacity was increased with the increase in NaOH concentration. Overall, the extent of MB dye adsorption increased with increase in initial dye concentration, contact time, and solution pH but decreased with increase in salt concentration and temperature for both the systems. Surface characteristics of pine cone and base modified pine cone were investigated using Fourier transform infrared spectrophotometer and scanning electron microscope. Equilibrium data were best described by both Langmuir isotherm and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity was found to be 129.87 mg g^?1 at solution pH of 9.02 for an initial dye concentration of 10 ppm by raw pine cone. The base modified pine cone showed the higher monolayer adsorption capacity of 142.25 mg g^?1 compared with raw pine cone biomass. The value of separation factor, R _L, from Langmuir equation and Freundlich constant, n, both give an indication of favourable adsorption. The various kinetic models, such as pseudo-first-order model, pseudo-second-order model, intraparticle diffusion model, double-exponential model, and liquid film diffusion model, were used to describe the kinetic and mechanism of adsorption process. Overall, kinetic studies showed that the dye adsorption process followed pseudo-second-order kinetics based on other models. The different kinetic parameters, including rate constant, half-adsorption time and diffusion coefficient, were determined at different physicochemical conditions. A single-stage bath adsorber design for the MB adsorption onto pine cone and modified pine cone has been presented based on the Langmuir isotherm model equation. Thermodynamic parameters, such as standard Gibbs free energy (ΔG ⁰), standard enthalpy (ΔH ⁰) and standard entropy (ΔS ⁰), were also calculated.     

Adsorption of lead using a new green material obtained from Portulaca plant

In the present study the potential of a new green material obtained from Portulaca oleracea plant was investigated. The material was used without any chemical treatment to study the adsorption behavior of lead ions from aqueous solution. Various batch experiments were carried out using different experimental conditions such as pH, contact time, adsorbent concentration, and metal ion concentration to identify the optimum conditions. The influence of these parameters on the adsorption capacity was studied. Results showed the optimum initial pH for adsorption as 6. Adsorption equilibrium was reached in 120?min. The adsorption data were modeled using both the Langmuir and Freundlich classical adsorption isotherms. Results show ~78% removal of lead from aqueous solution. The kinetic data corresponded well with pseudo second-order equation. From the initial results, the green material obtained from the waste of Portulaca seems to be a potential low-cost adsorbent for removal of lead ions from water.     

Biosorption of cadmium(II), lead(II) and cobalt(II) from aqueous solution by biochar from cones of larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill. <Emphasis Type="Italic">subsp. decidua</Emphasis>) and spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L. H. Karst)

Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd²⁺, Pb²⁺ and Co²⁺ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd²⁺, Pb²⁺ and Co²⁺ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb²⁺ were maximum 99.7%, and almost three times lower value for Cd²⁺ and Co²⁺ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon.