Catalogue of large alluvial fans in martian impact craters

We conducted a systematic, global survey using Thermal Emission Imaging System Infrared (THEMIS IR) coverage (∼100 m/pixel) to search for large alluvial fans in impact craters on Mars. Our survey has focused on large fans (apron areas greater than ∼40 km², usually located in craters greater than 20 km in diameter) due to the resolution of the THEMIS images and Mars Orbiter Laser Altimeter (MOLA) coverage. We find that the host craters are found to have a distinctive diameter range from 30-150 km. The fans generally cluster in three geographic areas—southern Margaritifer Terra, southwestern Terra Sabaea, and southwestern Tyrrhena Terra, however several outliers do exist. The alluvial fans do not form in a particular orientation along the crater rim nor are they associated with the location of current high rim topography. Fan area magnitude and variability increase with crater diameter while fan concavity magnitude and variability increase with decreasing crater diameter. Smaller fan aprons in general have higher, more variable concavity. The source of the water forming these fans is uncertain given the challenges of accommodating the global distribution pattern and formation patterns within the craters.     

Erosional modification and gully formation at Meteor Crater, Arizona: Insights into crater degradation processes on Mars

Hydrogeological modification of Meteor Crater produced a spectacular set of gullies throughout the interior wall in response to rainwater precipitation, snow melting, and possible groundwater discharge. The crater wall has an exceptionally well-developed centripetal drainage pattern consisting of individual alcoves, channels, and fans. Some of the gullies originate from the rim crest and others from the middle crater wall where a lithologic transition occurs; broad gullies occur along the crater corner radial faults. Deeply incised alcoves are well developed on the soft Coconino Sandstone exposed on the middle crater wall, beneath overlying dolomite. In general, the gully locations are along crater wall radial fractures and faults, which are favorable locales of erosion due to preferential rock breakup from faulting, and groundwater flow/discharge; these structural discontinuities are also the locales where the surface runoff from rain precipitation and snow melting can preferentially flow, causing erosion and crater degradation. Channels are well developed on the talus deposits and alluvial fans on the periphery of the crater floor. Caves exposed on the lower crater level point to percolation of surface runoff and selective discharge through fractures on the crater wall. In addition, lake sediments on the crater floor provide significant evidence of a past pluvial climate, when the water table was higher, and groundwater may have seeped from springs on the crater wall. Although these hydrological processes continue at Meteor Crater today, conditions at the crater are much more arid than they were soon after impact, reflecting a climatic shift. This climate shift and the hydrological modifications observed at Meteor Crater provide insights for landscape sculpturing on Mars during various parts of its history.     

Gasa impact crater,Mars: Very young gullies formed from impact into latitude-dependent mantle and debris-covered glacier deposits?

The mode of formation of gullies on Mars, very young erosional–depositional landforms consisting of an alcove, channel, and fan, is one of the most enigmatic problems in martian geomorphology. Major questions center on their ages, geographic and stratigraphic associations, relation to recent ice ages, and, if formed by flowing water, the sources of the water to cause the observed erosion/deposition. Gasa (35.72°S, 129.45°E), a very fresh 7-km diameter impact crater and its environment, offer a unique opportunity to explore these questions. We show that Gasa crater formed during the most recent glacial epoch (2.1–0.4 Ma), producing secondary crater clusters on top of the latitude-dependent mantle (LDM), interpreted to be a layered ice-dust-rich deposit emplaced during this glacial epoch. High-resolution images of a pre-Gasa impact crater ～100 km northeast of Gasa reveal that portions of the secondary-crater-covered LDM have been removed from pole-facing slopes in crater interiors near Gasa; gullies are preferentially located in these areas and channels feeding alcoves and fans can be seen to emerge from the eroding LDM layers to produce multiple generations of channel incision and fan lobes. We interpret these data to mean that these gullies formed extremely recently in the post-Gasa-impact time-period by melting of the ice-rich LDM. Stratigraphic and topographic relationships are interpreted to mean that under favorable illumination geometry (steep pole-facing slopes) and insolation conditions, melting of the debris-covered ice-rich mantle took place in multiple stages, most likely related to variations in spin-axis/orbital conditions. Closer to Gasa, in the interior of the ～18 km diameter LDM-covered host crater in which Gasa formed, the pole-facing slopes display two generations of gullies. Early, somewhat degraded gullies, have been modified by proximity to Gasa ejecta emplacement, and later, fresh appearing gullies are clearly superposed, cross-cut the earlier phase, and show multiple channels and fans, interpreted to be derived from continued melting of the LDM on steep pole-facing slopes. Thus, we conclude that melting of the ice-rich LDM is a major source of gully activity both pre-Gasa crater and post-Gasa crater formation. The lack of obscuration of Gasa secondary clusters formed on top of the LDM is interpreted to mean that the Gasa impact occurred following emplacement of the last significant LDM layers at these low latitudes, and thus near the end of the ice ages. This interpretation is corroborated by the lack of LDM within Gasa. However, Gasa crater contains a robustly developed set of gullies on its steep, pole-facing slopes, unlike other very young post-LDM craters in the region. How can the gullies inside Gasa form in the absence of an ice-rich LDM that is interpreted to be the source of water for the other adjacent and partly contemporaneous gullies? Analysis of the interior (floor and walls) of the host crater suggest that prior to the Gasa impact, the pole-facing walls and floor were occupied by remnant debris-covered glaciers formed earlier in the Amazonian, which are relatively common in crater interiors in this latitude band. We suggest that the Gasa impact cratering event penetrated into the southern portion of this debris-covered glacier, emplaced ejecta on top of the debris layer covering the ice, and caused extensive melting of the buried ice and flow of water and debris slurries on the host crater floor. Inside Gasa, the impact crater rim crest and wall intersected the debris-covered glacier deposits around the northern, pole-facing part of the Gasa interior. We interpret this exposure of ice-rich debris-covered glacial material in the crater wall to be the source of meltwater that formed the very well-developed gullies along the northern, pole-facing slopes of Gasa crater.     

Stratigraphy, mineralogy, and origin of layered deposits inside Terby crater, Mars

The 174 km diameter Terby impact crater (28.0°S-74.1°E) located on the northern rim of the Hellas basin displays anomalous inner morphology, including a flat floor and light-toned layered deposits. An analysis of these deposits was performed using multiple datasets from Mars Global Surveyor, Mars Odyssey, Mars Express and Mars Reconnaissance Orbiter missions, with visible images for interpretation, near-infrared data for mineralogical mapping, and topography for geometry. The geometry of layered deposits was consistent with that of sediments that settled mainly in a sub-aqueous environment, during the Noachian period as determined by crater counts. To the north, the thickest sediments displayed sequences for fan deltas, as identified by 100 m to 1 km long clinoforms, as defined by horizontal beds passing to foreset beds dipping by 6-10° toward the center of the Terby crater. The identification of distinct sub-aqueous fan sequences, separated by unconformities and local wedges, showed the accumulation of sediments from prograding/onlapping depositional sequences, due to lake level and sediment supply variations. The mineralogy of several layers with hydrated minerals, including Fe/Mg phyllosilicates, supports this type of sedimentary environment. The volume of fan sediments was estimated as >5000 km³ (a large amount considering classical martian fan deltas such as Eberswalde (6 km³)) and requires sustained liquid water activity. Such a large sedimentary deposition in Terby crater is characteristic of the Noachian/Phyllosian period during which the environment favored the formation of phyllosilicates. The latter were detected by spectral data in the layered deposits of Terby crater in three distinct layer sequences. During the Hesperian period, the sediments experienced strong erosion, possibly enhanced by more acidic conditions, forming the current morphology with three mesas and closed depressions. Small fluvial valleys and alluvial fans formed subsequently, attesting to late fluvial processes dated as late Early to early Late Hesperian. After this late fluvial episode, the Terby impact crater was submitted to aeolian processes and permanent cold conditions with viscous flow features. Therefore, the Terby crater displays, in a single location, geologic features that characterize the three main periods of time on Mars, with the presence of one of the thickest sub-aqueous fan deposits reported on Mars. The filling of Terby impact crater is thus one potential “reference geologic cross-section” for Mars stratigraphy.     

Sedimentary deposits in Xanthe Terra: Implications for the ancient climate on Mars

A variety of sedimentary deposits is observed in Xanthe Terra, Mars, including Gilbert-type deltas, fan deltas dominated by resedimentation processes, and alluvial fans. Sediments were provided through deeply incised valleys, which were probably incised by both runoff and groundwater sapping. Mass balances based on High-Resolution Stereo Camera (HRSC) digital terrain models show that up to ～30% of the material that was eroded in the valleys is present as deltas or alluvial fan deposits. Stratigraphic relationships and crater counts indicate an age of ～4.0 to ～3.8 Ga for the fluvial activity. Hydrologic modeling indicates that the deposits were probably formed in geologically very short time scales. Our results point to episodes of a warmer and wetter climate on early Mars, followed by a long period of significantly reduced erosion rates.     

Origin of the structure and planform of small impact craters in fractured targets: Endurance Crater at Meridiani Planum, Mars

We present observations and models that together explain many hallmarks of the structure and growth of small impact craters forming in targets with aligned fractures. Endurance Crater at Meridiani Planum on Mars (diameter ≈ 150 m) formed in horizontally-layered aeolian sandstones with a prominent set of wide, orthogonal joints. A structural model of Endurance Crater is assembled and used to estimate the transient crater planform. The model is based on observations from the Mars Exploration Rover Opportunity: (a) bedding plane orientations and layer thicknesses measured from stereo image pairs; (b) a digital elevation model of the whole crater at 0.3 m resolution; and (c) color image panoramas of the upper crater walls. This model implies that the crater’s current shape was mostly determined by highly asymmetric excavation rather than long-term wind-mediated erosion. We show that modal azimuths of conjugate fractures in the surrounding rocks are aligned with the square component of the present-day crater planform, suggesting excavation was carried farther in the direction of fracture alignments. This was previously observed at Barringer Crater in Arizona and we show the same relationship also holds for Tswaing Crater in South Africa. We present models of crater growth in which excavation creates a “stellate” transient cavity that is concave-cuspate in planform. These models reproduce the “lenticular-crescentic” layering pattern in the walls of some polygonal impact craters such as Endurance and Barringer Craters, and suggest a common origin for tear faults and some crater rays. We also demonstrate a method for detailed error analysis of stereogrammetric measurements of bedding plane orientations.     

Preservation of Late Amazonian Mars ice and water-related deposits in a unique crater environment in Noachis Terra: Age relationships between lobate debris tongues and gullies

The Amazonian period of Mars has been described as static, cold, and dry. Recent analysis of high-resolution imagery of equatorial and mid-latitude regions has revealed an array of young landforms produced in association with ice and liquid water; because near-surface ice in these regions is currently unstable, these ice-and-water-related landforms suggest one or more episodes of martian climate change during the Amazonian. Here we report on the origin and evolution of valley systems within a degraded crater in Noachis Terra, Asimov Crater. The valleys have produced a unique environment in which to study the geomorphic signals of Amazonian climate change. New high-resolution images reveal Hesperian-aged layered basalt with distinctive columnar jointing capping interior crater fill and providing debris, via mass wasting, for the surrounding annular valleys. The occurrence of steep slopes (>20°), relatively narrow (sheltered) valleys, and a source of debris have provided favorable conditions for the preservation of shallow-ice deposits. Detailed mapping reveals morphological evidence for viscous ice flow, in the form of several lobate debris tongues (LDT). Superimposed on LDT are a series of fresh-appearing gullies, with typical alcove, channel, and fan morphologies. The shift from ice-rich viscous-flow formation to gully erosion is best explained as a shift in martian climate, from one compatible with excess snowfall and flow of ice-rich deposits, to one consistent with minor snow and gully formation. Available dating suggests that the climate transition occurred >8 Ma, prior to the formation of other small-scale ice-rich flow features identified elsewhere on Mars that have been interpreted to have formed during the most recent phases of high obliquity. Taken together, these older deposits suggest that multiple climatic shifts have occurred over the last tens of millions of years of martian history.     

Constraints on the origin and evolution of the layered mound in Gale Crater, Mars using Mars Reconnaissance Orbiter data

Gale Crater contains a 5.2 km-high central mound of layered material that is largely sedimentary in origin and has been considered as a potential landing site for both the MER (Mars Exploration Rover) and MSL (Mars Science Laboratory) missions. We have analyzed recent data from Mars Reconnaissance Orbiter to help unravel the complex geologic history evidenced by these layered deposits and other landforms in the crater. Results from imaging data from the High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) confirm geomorphic evidence for fluvial activity and may indicate an early lacustrine phase. Analysis of spectral data from the CRISM (Compact Reconnaissance Imaging Spectrometer for Mars) instrument shows clay-bearing units interstratified with sulfate-bearing strata in the lower member of the layered mound, again indicative of aqueous activity. The formation age of the layered mound, derived from crater counts and superposition relationships, is ∼3.6-3.8 Ga and straddles the Noachian-Hesperian time-stratigraphic boundary. Thus Gale provides a unique opportunity to investigate global environmental change on Mars during a period of transition from an environment that favored phyllosilicate deposition to a later one that was dominated by sulfate formation.     

A Re-examination of the Crater near Crestone,Colorado*

Abstract The Crestone Crater is an elliptical bowl measuring 355 feet by 246 feet with a mean depth of 23 feet. It lies in unconsolidated sand on the surface of an alluvial fan at the base of the Sangre de Cristo Mountain Range in the San Luis Valley, Colorado (37° 54′ N, 105° 39′ W). Aerial photographs show the crater as a striking feature in its setting on a gently undulating terrain. We examined the site in August 1963 to appraise the possibility that it was formed by meteorite or comet impact. The crater and its vicinity were mapped at two-foot contour intervals, and two lines of auger-hole samples, eight feet deep, were collected across the crater. Sand from the rim and floor is similar in grain size and composition to that several miles to the north and south. It is barren of meteoritic debris, nickel-iron spherules, rock flour, and impact glass. The crater is less than half as deep relative to its diameter as known meteorite explosion craters. Furthermore, topographic profiles indicate that the crater does not form a depression in the land surface. The crater rim is a positive feature enclosing a basin that has a floor approximately level with the surface of the alluvial fan on which it lies. In the absence of any mineralogic or topographic evidence of impact or explosion, we conclude that this landform is not meteoritic or cometary in origin.     

Mars Exploration Rover candidate landing sites as viewed by THEMIS

The analysis of six landing sites that were candidates for the two NASA Mars Exploration Rovers (MER) benefited from recently available image data from the Thermal Emission Imaging Spectrometer (THEMIS) onboard the 2001 Mars Odyssey spacecraft. The combination of daytime and nighttime thermal infrared images from THEMIS supplemented by additional data sets has lead to new or expanded insights into the nature of each landing site. In Meridiani Planum, a layer of lighter-toned, higher thermal inertia material is observable just below the hematite-bearing layer. Gusev Crater displays a more complex stratigraphy than previously observed, including an upper layer with lobate margins. The highest inertia unit of southern Isidis Planitia is confined to topographic lows in the rim/basin margin and does not appear to be due to highland material transported onto the basin floor. The enigmatic, ovoid, blocky terrain on the floor of Melas Chasma displays higher thermal inertia than its surroundings, an indication that it contains coarser or more indurated material than the adjacent aeolian bedforms. The myriad channels of Athabasca Valles display distinctive thermal signatures despite the presence of a bright layer of dust covering the region. The presence of alluvial fans produced from spur-and-gulley erosion of the walls of Eos Chasma demonstrates that mass movements have occurred following the canyon scouring floods.     

Detailed study of an hydrological system of valleys, a delta and lakes in the Southwest Thaumasia region, Mars

The occurrence of fluvial activity and standing bodies of water on early Mars is the subject of debate. Using MOC, MOLA, and THEMIS data, we identify a whole set of landforms in the Thaumasia region which attest to water flows during geologically long periods of more than thousand years. A thick fan-delta is identified within an impact crater at the outlet of a deep valley. Ponded water filled and overflowed this crater's rim, creating entrance and exit breaches and an outlet valley. These landforms show that the 25-km diameter impact crater contained a lake up to 600 m deep. At the head of this crater's deep contributing valley, a closed depression may have contained another lake, but depositional landforms are not evident in this headward basin. Alternatively, groundwater discharge may have supplied the valley, but the observed landforms are not consistent with a sudden release of water, as is usually invoked for the large martian outflows channels. Stratigraphic relationships show that this hydrological activity occurred during the Hesperian period, thus relatively late in the history of martian valley network development.     

Concentric crater fill in the northern mid-latitudes of Mars: Formation processes and relationships to similar landforms of glacial origin

Hypotheses accounting for the formation of concentric crater fill (CCF) on Mars range from ice-free processes (e.g., aeolian fill), to ice-assisted talus creep, to debris-covered glaciers. Based on analysis of new CTX and HiRISE data, we find that concentric crater fill (CCF) is a significant component of Amazonian-aged glacial landsystems on Mars. We present mapping results documenting the nature and extent of CCF along the martian dichotomy boundary over −30 to 90°E latitude and 20-80°N longitude. On the basis of morphological analysis we classify CCF landforms into “classic” CCF and “low-definition” CCF. Classic CCF is most typical in the middle latitudes of the analysis area (∼30-50°N), while a range of degradation processes results in the presence of low-definition CCF landforms at higher and lower latitudes. We evaluate formation mechanisms for CCF on the basis of morphological and topographic analyses, and interpret the landforms to be relict debris-covered glaciers, rather than ice-mobilized talus or aeolian units. We examine filled crater depth-diameter ratios and conclude that in many locations, hundreds of meters of ice may still be present under desiccated surficial debris. This conclusion is consistent with the abundance of “ring-mold craters” on CCF surfaces that suggest the presence of near-surface ice. Analysis of breached craters and distal glacial deposits suggests that in some locations, CCF-related ice was once several hundred meters higher than its current level, and has sublimated significantly during the most recent Amazonian. Crater counts on ejecta blankets of filled and unfilled craters suggests that CCF formed most recently between ∼60 and 300 Ma, consistent with the formation ages of other martian debris-covered glacial landforms such as lineated valley fill (LVF) and lobate debris aprons (LDA). Morphological analysis of CCF in the vicinity of LVF and LDA suggests that CCF is a part of an integrated LVF/LDA/CCF glacial landsystem. Instances of morphological continuity between CCF, LVF, and LDA are abundant. The presence of formerly more abundant CCF ice, coupled with the integration of CCF into LVF and LDA, suggests the possibility that CCF represents one component of the significant Amazonian mid-latitude glaciation(s) on Mars.     

Pervasive aqueous paleoflow features in the Aeolis/Zephyria Plana region, Mars

A survey of THEMIS visible wavelength images in the Aeolis/Zephyria Plana region over the two western lobes of the equatorial Medusae Fossae Formation (MFF) shows ∼150 sinuous ridges having a variety of morphologies and contexts. To systematize investigation, we use a classification scheme including both individual ridge and ridge network types, as well as associations with impact craters and fan-shaped features. The morphology of the ridges, their location downslope from higher topography (e.g., crater rims and scarps), and their association with fan-shaped forms indicate that most sinuous ridges formed through overland aqueous flow. Analysis of observations by individual ridge type leads to interpretation of most of these sinuous ridges as inverted fluvial channels or floodplains and a few as possible eskers, with the origin of the remaining ridges under continuing investigation. About 15% of the sinuous ridges are associated with impact craters, but data analysis does not support a genetic relationship between the craters and the sinuous ridges. Instead, analysis of one sinuous ridge network associated with a crater indicates that the water source for the network was atmospheric in origin, namely, precipitation runoff. The broad areal distribution of these ∼150 ridges and the network morphologies, in particular the branched and subparallel types, suggest that an atmospheric water source is generally applicable to the population of sinuous ridges as a whole. This concentration of sinuous ridges is the largest single population of such landforms on Mars and among the youngest. These ridges are situated at a paleoscarp between Cerberus Palus and the Aeolis highlands, suggesting that the precipitation that formed them was orographic in origin. The ages of the equatorial MFF units in which this population of sinuous ridges is found imply that this orographic rain and/or snow fell during some period from the late Hesperian through the middle Amazonian.     

Evidence for episodic alluvial fan formation in far western Terra Tyrrhena, Mars

A Late Noachian-aged alluvial fan complex within Harris Crater in far western Terra Tyrrhena, Mars, is comprised of two well-defined source regions and associated discrete depositional lobes. Three fan units were recognized based on common morphological characteristics, thermal properties and spectral signatures. Although the entire fan complex has been subjected to extensive erosional degradation, the preserved morphologies record episodic fan formation and indicate the type of flow processes that occurred; the bulk of the fan surface has morphology consistent with fluvial emplacement while one fan unit exhibits a rugged surface texture with boulders consistent with a debris flow. This transition from fluvial to late-stage debris flow(s) suggests a decline in available water and/or change in sediment supply. The thermal inertia values obtained for all three fan surface units (mean values ranged from 318 to 344 J m⁻² K⁻¹ s^−1/2) are typical for coarse-grained and/or well-indurated materials on Mars, but subtle variations point to important distinctions. Variations in aeolian bedform coverage as well as the density of ridges (inferred inverted channels) and boulders contribute to these subtle fan thermophysical differences and likely reflect changes in the fan depositional mechanisms and variations in post-depositional modification histories. The majority of the alluvial fan surface has a spectral signature that is broadly similar to TES “Surface Type 2” (ST2), with some important exceptions at long wavelengths. However, a unique spectral component was identified in one of the fan units (unit 3), that likely reflects lithological differences from other fan materials. This spectral attribute of unit 3 matched locations within the western catchment providing confirmation of provenance and supporting the contention that sediment supply changed over time as the fan developed. Finally, we applied simple modeling to a well preserved subsection of the fan complex to quantify the developmental history. Using the computed eastern fan volume (32 km³), significant water, likely from precipitation, was involved in fan construction (>50 km³) and an extensive period of fan formation occurred over millennia or longer.     

Impact cratering in H2O‐bearing targets on Mars: Thermal field under craters as starting conditions for hydrothermal activity

Abstract– We present a case modeling study of impact crater formation in H₂O‐bearing targets. The main goal of this work was to investigate the postimpact thermal state of the rock layers modified in the formation of hypervelocity impact craters. We present model results for a target consisting of a mixture of H₂O‐ice and rock, assuming an ice/water content variable with depth. Our model results, combined with results from previous work using dry targets, indicate that for craters larger than about 30 km in diameter, the onset of postimpact hydrothermal circulation is characterized by two stages: first, the formation of a mostly dry, hot central uplift followed by water beginning to flow in and circulate through the initially dry and hot uplifted crustal rocks. The postimpact thermal field in the periphery of the crater is dependent on crater size: in midsize craters, 30–50 km in diameter, crater walls are not strongly heated in the impact event, and even though ice present in the rock may initially be heated enough to melt, overall temperatures in the rock remain below melting, undermining the development of a crater‐wide hydrothermal circulation. In large craters (with diameters more than 100 km or so), the region underneath the crater floor and walls is heated well above the melting point of ice, thus facilitating the onset of an extended hydrothermal circulation. These results provide preliminary constraints in characterizing the many water‐related features, both morphologic and spectroscopic, that high‐resolution images of Mars are now detecting within many Martian craters.     

Crater geometry and ejecta thickness of the Martian impact crater Tooting

Abstract— We use Mars Orbiter Laser Altimeter (MOLA) topographic data and Thermal Emission Imaging System (THEMIS) visible (VIS) images to study the cavity and the ejecta blanket of a very fresh Martian impact crater ?29 km in diameter, with the provisional International Astronomical Union (IAU) name Tooting crater. This crater is very young, as demonstrated by the large depth/diameter ratio (0.065), impact melt preserved on the walls and floor, an extensive secondary crater field, and only 13 superposed impact craters (all 54 to 234 meters in diameter) on the ?8120 km² ejecta blanket. Because the pre‐impact terrain was essentially flat, we can measure the volume of the crater cavity and ejecta deposits. Tooting crater has a rim height that has >500 m variation around the rim crest and a very large central peak (1052 m high and >9 km wide). Crater cavity volume (i.e., volume below the pre‐impact terrain) is ?380 km³ the volume of materials above the pre‐impact terrain is ?425 km³. The ejecta thickness is often very thin (<20 m) throughout much of the ejecta blanket. There is a pronounced asymmetry in the ejecta blanket, suggestive of an oblique impact, which has resulted in up to ?100 m of additional ejecta thickness being deposited down‐range compared to the up‐range value at the same radial distance from the rim crest. Distal ramparts are 60 to 125 m high, comparable to the heights of ramparts measured at other multi‐layered ejecta craters. Tooting crater serves as a fresh end‐member for the large impact craters on Mars formed in volcanic materials, and as such may be useful for comparison to fresh craters in other target materials.     

A geomorphic analysis of Hale crater, Mars: The effects of impact into ice-rich crust

Hale crater, a 125 × 150 km impact crater located near the intersection of Uzboi Vallis and the northern rim of Argyre basin at 35.7°S, 323.6°E, is surrounded by channels that radiate from, incise, and transport material within Hale’s ejecta. The spatial and temporal relationship between the channels and Hale’s ejecta strongly suggests the impact event created or modified the channels and emplaced fluidized debris flow lobes over an extensive area (>200,000 km²). We estimate ∼10¹⁰ m³ of liquid water was required to form some of Hale’s smaller channels, a volume we propose was supplied by subsurface ice melted and mobilized by the Hale-forming impact. If 10% of the subsurface volume was ice, based on a conservative porosity estimate for the upper martian crust, 10¹² m³ of liquid water could have been present in the ejecta. We determine a crater-retention age of 1 Ga inside the primary cavity, providing a minimum age for Hale and a time at which we propose the subsurface was volatile-rich. Hale crater demonstrates the important role impacts may play in supplying liquid water to the martian surface: they are capable of producing fluvially-modified terrains that may be analogous to some landforms of Noachian Mars.     

Relative crater production rates on planets

Dynamical histories of planetesimals in specified orbits, calculated by Wetherill (1975) and others, have estimates of relative numbers of impacts on different planets. These impact rates, $\text{F}$, are converted to crater production rates, F, by means of tables developed in this paper. Conversions are dependent on impact velocity and surface gravity. Crater retention ages can then be derived from (crater density)/(crater production rate). Such calculations of impact rates and their histories give the only basis, independent of sample dating, for establishing absolute geologic histories of the planets, contrary to published implications that this can be done by comparison of photos alone. A survey of the results, from orbits of interplanetary objects studied to date, indicates that the terrestial planets have crater production rates within a factor ten of each other, and that planet's crater retention ages can probably be determined with a factor of ±3. Further calculations of orbital histories of additional interplanetary bodies are suggested to put photogeologic analyses from spacecraft imagery on a firmer basis.Applications to Mars, as an example, using least-squares fits to crater-count data, suggest an average age of 0.3 to 3 b.y. for two types of channels. The Tharsis volcanics are found to be slightly younger than the channels (strongly confirmed by photomorphology since they are not cut by channels) and Olympus Mons is about 0.06 to 0.6 b.y. old, contrary to recent assertions that Olympus Mons is 2.5 b.y. old and most Martian volcanic provinces older than 3 b.y. Data strongly support the hypothesis that Martian channels formed in a fluvial climate that persisted on Mars until the Tharsis volcanism caused a change in the Martian obliquity state, as outlined by Toon, Ward, and Burns (1977).     

Distribution of small channels on the Martian surface

The distribution of small channels on Mars has been mapped from Mariner 9 images, at the 1:5 000 000 scale, by the author. The small channels referred to here are small valleys ranging in width from the resolution limit of the Mariner 9 wide-angle images (～1 km) to about 10 km. The greatest density of small band occurs in dark cratered terrain. This dark zone forms a broad subequatorial band around the planet. The observed distribution may be the result of decreased small-channel visibility in bright areas due to obscuration by a high albedo dust or sediment mantle. Crater densities within two small-channel segments show crater size-frequency distributions consistent with those of the oldest of the heavily cratered plains units. Such crater densities coupled with the almost exclusive occurrence of small channels in old cratered terrain and the generally degraded appearance of small channels in the high-resolution images (～100 m) imply a major episode of small-channel formation early in Martian geologic history.     

Thermal imaging of sedimentary features on alluvial fans

Aerial thermal imaging is used to study grain-size distributions and induration on a wide variety of alluvial fans in the desert southwest of the United States. High-resolution aerial thermal images reveal evidence of sedimentary processes that rework and build alluvial fans, as preserved in the grain-size distributions and surface induration those processes leave behind. A catalog of constituent sedimentary features that can be identified using aerial thermal and visible imaging is provided. These features include clast-rich and clast-poor debris flows, incised channel deposits, headward-eroding gullies, sheetflood, lag surfaces, active/inactive lobes, distal sand-skirts and basin-related salt pans. Ground-based field observations of surface grain-size distributions, as well as morphologic, cross-cutting and topographic relationships were used to confirm the identifications of these feature types in remotely acquired thermal and visible images. Thermal images can also reveal trends in grain sizes between neighboring alluvial fans on a regional scale. Although inferences can be made using thermal images alone, the results from this study demonstrate that a more thorough geological interpretation of sedimentary features on an alluvial fan can be made using a combination of thermal and visible images. The results of this study have potential applications for Mars, where orbital thermal imaging might be used as a tool for evaluating constituent sedimentary processes on proposed alluvial fans.