Volcanic and structural history of the Hohi volcanic zone,central Kyushu,Japan

More than 5000 km³ of magmatic material was erupted in Pliocene-Pleistocene times in a volcano-tectonic depression, i. e., the Hohi volcanic zone (HVZ) in central Kyushu, Japan. The eruptive deposits consist mainly of andesite lava flows and large-scale pyroclastic-flow deposits. Their eruptions were accompanied by the formation of an EW-oriented graben (70 km × 45 km) under regional NS extensional stress. Pre-Tertiary basement rocks are absent on the surface of the graben but occur at depth, having subsided up to 3 km. Radiometric ages of volcanic rocks on the surface show zoned isochrons from 5 Ma at the margin to 0.3 Ma in the center of the HVZ. The youngest center of age zonation coincides with a 30 mgal negative Bouguer gravity anomaly. Radiometric ages of rocks from drill cores are older toward the bottom of the graben, reaching a maximum of at least 4 Ma. Volcanic activity concentrated over time toward the center of the graben and buried successively erupted material. Areas of active volcanism in the HVZ became smaller and changed in style during the 5-Ma history of activity. Volcanism of the early stage (5-2 Ma) was characterized by voluminous eruptions of andesitic lava flows that formed lava plateaus and were intruded by EW-oriented feeder dikes, perhaps related to fissure eruptions. In contrast, late-stage volcanism (2-0 Ma) resulted primarily in andesitic to dacitic lava domes with features of monogenetic volcanoes produced at low eruption rates. The HVZ shows unimodal volcanism dominated by andesitic and dacitic lavas with a small amount of rhyolite and only traces of basalt; these characteristics differ from those that typify volcanism in most other extensional areas. Erupted material in the HVZ is of the calc-alkali and high-alkali tholeiite series and shows no significant chemical changes over 5 Ma, except for an increase in K₂O after 1.6 Ma. The net horizontal displacement along normal faults indicates that the HVZ widened by about 10%–20% across the graben at an average rate of 0.1 cm/yr. I interpret the HVZ to be neither a pull-apart structure of the pre-Tertiary basement nor the result of propagation of the Okinawa Trough, but rather the earliest stage of rifting when vertical subsidence caused by normal faulting is compensated by filling with volcanic material.     

Thermo-tectonic history of Ryoke Basement in Hohi volcanic zone, northeast Kyushu, Japan: Constraints from fission track thermochronology

Abstract Apatite and zircon fission track ages from Ryoke Belt basement in northeast Kyushu show late Cretaceous, middle to late Eocene, middle Miocene and Quaternary groupings. The basement cooled through 240 ± 25°C, the closure temperature for fission tracks in zircon, mainly during the interval 74-90 Ma as a result of uplift and denudation, the pattern being uniform across northeast Kyushu. In combination with published K-Ar ages and the Turonian-Santonian age of sedimentation in the Onogawa Basin, active suturing along the Median Tectonic Line from 100-80 Ma, at least, is inferred. Ryoke Belt rocks along the northern margin of Hohi volcanic zone (HVZ) cooled rapidly through ∼100°C to less than 50°C during the middle Eocene to Oligocene, associated with 2.5-3.5 km of denudation. The timing of this cooling follows peak heating in the Eocene-Oligocene part (Murotohanto subbelt) of the Shimanto Belt in Muroto Peninsula (Shikoku) inferred previously, and coincides with the 43 Ma change in convergence direction of the Pacific-Eurasian plate and the demise of the Kula-Pacific spreading centre. Ryoke Belt rocks along the southern margin of HVZ have weighted mean apatite fission track ages of 15.3 ± 3.1 Ma. These reset ages are attributed to an increase in geothermal gradient in the middle Miocene combined with rapid denudation and uplift of at least 1.4 km. These ages indicate that heating of the overriding plate associated with the middle Miocene start of subduction of hot Shikoku Basin lithosphere extended into the Ryoke Belt in northeast Kyushu. Pleistocene apatite fission track ages from Ryoke Belt granites at depth in the centre of HVZ are due to modern annealing in a geothermal environment.     

Factors governing the flow lineation of a large-scale pyroclastic flow — An example in the ata pyroclastic flow deposit,Japan

Schmincke andSwanson (1967) explained laminar flowage structures as indicators for flow direction of pyroclastic flows that show a radial flow pattern away from the source. Several other authors have reported similar examples, but the influence of pre-flow topographic relief has not been analyzed. Flow lineations were measured for the Ata pyroclastic flow deposit, southwestern Japan. This deposit has covered an undulating basement topography. Preferred orientation of crystals and lithic fragments were measured on thin sections cut parallel to sedimentary layering. The following three factors which control the flow lineation have been recognized. 1) Flow lineations oriented radially away from the source, as described by previous authors, were obtained only for samples collected from the surface of the pyroclastic flow plateau where the basement valleys were nearly filled by earlier flow units. 2) Lineations near the floor of narrow valleys were parallel to the strike of the valley. 3) Flow lineations near the wall of valleys tend to be parallel to the dip of the valley walls. These data suggest that the initial radial movement of pyroclastic flows from the source gradually changes direction to parallel the strike of deep valleys due to confining effect of valley wall. Flows which are trapped within a valley, tends to move towards the bottom of the valley just prior to the final settlement. After the basement topographic relief has been filled up with earlier flow units, the later flows maintain their original radial movement until final settlement.     

A distinction technique between volcanic and tectonic depression structures based on the restoration modeling of gravity anomaly: a case study of the Hohi volcanic zone, central Kyushu, Japan

In this study, we propose a numerical modeling technique which restores the gravity anomaly of tectonic origin and identifies the gravity low of caldera origin. The identification is performed just by comparing the restored gravity anomalies with the observed gravity anomalies, thus we do not need detailed geophysical and geological information around the buried caldera. The technique has been successfully applied to distinguish the gravity low originated in the buried Shishimuta caldera from other gravity lows in the Hohi volcanic zone, central Kyushu in Japan.     

Depositional ramps: asymmetrical distribution structure in the Ata pyroclastic flow deposit,Japan

The asymmetrical distribution of the welded Ata large-scale pyroclastic flow deposit in Southern Kyushu, Japan was identified. This distribution pattern was defined as depositional ramps. Depositional ramps can be identified in valleys wider than 1 km and become smaller-scale with increasing distance from the source. Upslope directions of depositional ramps are generally radially away from the source caldera, suggesting that the structure was formed by the flow of pyroclastic material radially away from the source. The original depositional surface was reconstructed based on field mapping and density measurements of the pyroclastic flow deposit. Depositional ramps having a dip angle of more than 9° were reconstructed on the vent-facing slopes of the topography underlying the valley-filling deposits in the area within 10 km of the caldera rim. Such a dip angle is much larger than previously described dip angles. The size and gradient of the depositional ramps decreases with increasing distance from the source. Depositional ramps are recognized commonly in densely welded pyroclastic flow deposits. A high emplacement temperature is required to form the depositional ramps. This suggests that the pyroclastic flow was transported as a dense, fluidized layer to minimize heat loss.     

Flow directions inferred from imbrication in the Handa pyroclastic flow deposit in Japan

Flow direction patterns have been determined by imbrication measurements of pumice and lithic fragments of the Handa pyroclastic flow deposit, in order to estimate the source vent location and to analyze the flow behavior. The pyroclastic flow deposit studied is dacitic in composition, 2 km² in volume, and >32,300 Y.B.P. in age. Flow directions from 52 outcrops indicate a source vent located within the area of recent lava domes of Kuju Volcano. The distribution of the pyroclastic flow deposit and the flow direction patterns determined by imbrication suggest that the pyroclastic flow accurately followed the topographic relief at the time of eruption. The presence of imbrication indicates the change of flow-regime from turbulent condition to laminar condition according to the distance from the source vent. Imbrication is visible within the lower-half reaches of the pyroclastic flow distribution, where the pyroclastic flow had developed the laminar flow characteristics of a dense gravity current.     

Incursion of a large-volume,spatter-bearing pyroclastic density current into a caldera lake: Pavey Ark ignimbrite,Scafell caldera,England

The Scafell caldera-lake volcaniclastic succession is exceptionally well exposed. At the eastern margin of the caldera, a large andesitic explosive eruption (>5 km³) generated a high-mass-flux pyroclastic density current that flowed into the caldera lake for several hours and deposited the extensive Pavey Ark ignimbrite. The ignimbrite comprises a thick (≤125 m), proximal, spatter- and scoria-rich breccia that grades laterally and upwards into massive lapilli-tuff, which, in turn, is gradationally overlain by massive and normal-graded tuff showing evidence of soft-state disruption. The subaqueous pyroclastic current carried juvenile clasts ranging from fine ash to metre-scale blocks and from dense andesite through variably vesicular scoria to pumice (<10³ kg m⁻³). Extreme ignimbrite lithofacies diversity resulted via particle segregation and selective deposition from the current. The lacustrine proximal ignimbrite breccia mainly comprises clast- to matrix-supported blocks and lapilli of vesicular andesite, but includes several layers rich in spatter (≤1.7 m diameter) that was emplaced in a ductile, hot state. In proximal locations, rapid deposition of the large and dense clasts caused displacement of interstitial fluid with elutriation of low-density lapilli and ash upwards, so that these particles were retained in the current and thus overpassed to medial and distal reaches. Medially, the lithofacies architecture records partial blocking, channelling and reflection of the depletive current by substantial basin-floor topography that included a lava dome and developing fault scarps. Diffuse layers reflect surging of the sustained current, and the overall normal grading reflects gradually waning flow with, finally, a transition to suspension sedimentation from an ash-choked water column. Fine to extremely fine tuff overlying the ignimbrite forms ∼25% of the whole and is the water-settled equivalent of co-ignimbrite ash; its great thickness (≤55 m) formed because the suspended ash was trapped within an enclosed basin and could not drift away. The ignimbrite architecture records widespread caldera subsidence during the eruption, involving volcanotectonic faulting of the lake floor. The eruption was partly driven by explosive disruption of a groundwater-hydrothermal system adjacent to the magma reservoir.     

Genesis of magmas producing pumice flow and fall deposits of towada caldera,Japan

Towada caldera, lying near the northern end of Honsyu, Japan was constructed by eruptions of lavas and pyroclastic materials in three separate periods. At the ends of the first and second periods, great amounts of pumice were erupted in the form of pumice flow and fall respectively. Each pumice cruption was followed by collapse of the center of the cones resulting in double calderas. The lavas of these three periods and the pumice of the first and second periods were chemically analysed. The result was plotted in several different types of variation diagrams. The points for the lavas and pumice lie generally on smooth curves, indicating that the magmas which caused the pumice cruptions belong to the same general differentiation series as do the lavas. If SiO₂/FeO+Fe₂O, is plotted against sodification index (MgO x 100/MgO+FeO+Fe₂O, +Na₂O+K₂O), points for the lavas lie on a straight line, whereas those for the pumice lie on another straight line branching from the former at some point in the middle stage of differentiation. The rate of increase of this ratio in the pumice is greater than in the lavas, implying that less SiO₂ and more iron were subtracted from the magmas producing the pumice than from those producing the lavas. This was probably caused by crystallization of a greater amount of magnetite in the former magmas possibly due to higher oxygen partial pressure which may be in turn related to higher water content. It is not necessary to postulate melting of the crust in order to generate magmas of the pumice eruptions of the central type.     

Stratified flow in pyroclastic surges

Stratified flow theory is applied to pyroclatic surges in an effort to gain insight into transport dynamics during explosive eruptions. Particle transport is assumed to be by turbulent suspension, and calculations contained herein show that this is likely for many cases including the 18 May 1980 blast at mount St. Helens. The discussion centers on the Rouse number (Pn), which represents a ratio of particle settling velocity to scale of turbulence; the Brunt-Väisälä frequency (N), which is the maximum possible frequency of internal waves; the Froude number (Fr), representing the ratio of inertial forces to gravitational forces; and the Richardson number (Ri), a ratio of buoyant restoring forces to turbulent mixing forces. The velocity or flow power dependence of bed-form wavelength in surge deposits is related to a velocity dependence of wavelength of internal waves in the turbulent surge. This produces a decrease in dune wavelength with increasing distance from vent. Migration direction of bed forms is related toFr as it is defined for a continuously stratified flow. Proximal to distal facies variations in surge deposits reflect increasingPn andRi as the flows move away from their sources. This produces the progression from sandwave to massive to planar facies with increasing distance from vent. Where the long axis of topography is at low angles to the flow direction, massive facies in topographic lows may from concurrently with sandwave facies on highs, due to the higher particle concentration in the lows. Where long axis of topography is at high angles to flow direction, denser lower parts of the surge may be dammed or blocked. Blocked material tends to form massive flows that may move down slope independent of the overriding surge. A model incorporating turbulent transport, stratified flow, and time evolution of pyroclastic surges is proposed for deposits which have been attributed to both pyroclastic flow and pyroclastic surge transport by various workers. During the initial high energy (waxing) phase of the eruptive event,Pn is sufficiently low that only coarse, but poorly sorted, material is deposited to form relatively coarse bottom layers. As the event wanes, remaining finer material is deposited through a thin bed load to produce overlying bedded and cross-bedded veneer deposits. Throughout most of the event, blocking occurs to produce relatively thick and massive deposits in valley bottoms.     

Reconstruction of the most recent volcanic eruptions from the Valles caldera,New Mexico

Products of the latest eruptions from the Valles caldera, New Mexico, consist of the El Cajete Pyroclastic Beds and Battleship Rock Ignimbrite, a sequence of pyroclastic fall and density current deposits erupted at ~ 55 ka, capped by the later Banco Bonito Flow erupted at ~ 40 ka, and collectively named the East Fork Member of the Valles Rhyolite. The stratigraphy of the East Fork Member has been the subject of conflicting interpretations in the past; a long-running investigation of short-lived exposures over a period of many years enables us to present a more complete event stratigraphy for these eruptions than has hitherto been possible. The volume of rhyolitic magma erupted during the 55 ka event may have been more than 10 km³, and for the 40 ka event can be estimated with rather more confidence at 4 km³. During the earlier event, plinian eruptions dispersed fallout pumice over much of the Valles caldera, the southern Jemez Mountains, and the Rio Grande rift. We infer a fallout thickness of several decimeters at the site of the city of Santa Fe, and significant ash fall in eastern New Mexico. In contrast, pyroclastic density currents were channeled within the caldera moat and southwestward into the head of Cañon de San Diego, the principal drainage from the caldera. Simultaneous (or rapidly alternating) pyroclastic fallout and density current activity characterized the ~ 55 ka event, with density currents becoming more frequent as the eruption progressed through two distinct stages separated by a brief hiatus. One early pyroclastic surge razed a forest in the southern caldera moat, in a similar manner to the initial blast of the May 18, 1980 eruption of Mt. St. Helens. Ignimbrite outflow from the caldera through the drainage notch may have been restricted in runout distance due to steep, rugged topography in this vicinity promoting mixing between flows and air, and the formation of phoenix clouds. Lavas erupted during both the ~ 55 and ~ 40 ka events were largely confined to the caldera moat. Any future rhyolitic eruptions of similar magnitude in the southern or western parts of the Valles caldera will likely affect similar areas.     

The ground layer of Ata pyroclastic flow deposit,southwestern Japan — evidence for the capture of lithic fragments

Lithic fragments in the ground layer of the Ata pyroclastic flow deposit, southwestern Japan, were supplied from two different sources. One is the eruptive vent and the other is the basement rock exposed underneath the path of flow. Lithic fragments captured at the eruptive vent gradually decrease in size with distance from the source. Local increases of ML or Md are proportional to increased amounts of captured lithic fragments. The pyroclastic flow eroded basement formations on slopes dipping away from the source, and deposited the lithics within the ground layer on slopes dipping towards the source. The ground layer was found only in the western half of the Ata pyroclastic flow deposit. The absence of the ground layer in the eastern half of the pyroclastic flow deposit is interpreted to result from a selective loss of lithics when the flow traversed a bay or a lake located just east from the vent.     

Spatter-rich pyroclastic flow deposits on Santorini,Greece

Pyroclastic deposits exposed in the caldera walls of Santorini Volcano (Greece), contain several prominent horizons of coarse-grained andesitic spatter and cauliform volcanic bombs. These deposits can be traced around most of the caldera wall. They thicken in depressions and are intimately associated with ignimbrite and co-ignimbrite lithic lag breccias. They are interpreted as a proximal facies of pyroclastic flow deposits. Evidence for a flow origin includes the presence of a fine-grained pumiceous matrix, flow deformation of ductile spatter clasts, exceedingly coarse grain sizes several kilometres from any plausible vent, imbrication of flattened spatter clasts, intimate interbedding with normal pyroclastic flow deposits and the presence of inversely graded basal layers. The deposits contain hydrothermally altered, rounded lithic ejecta including gabbro nodules. The andesitic ejecta and the fine matrix are typically moderately to poorly vesicular indicating that magmatic gas had a subordinate role in the eruptive process. The andesitic clasts contain abundant angular lithic inclusions and some clasts are themselves formed of pre-existing agglutinate. We propose that these eruptions occurred when external water gained access to the vents, causing large-scale explosions which formed pyroclastic flows rich in coarse, semifluid but poorly vesicular ejecta. We postulate that large volumes of coarse pyroclastic ejecta and degassed lava accumulated in a deep crater prior to being disrupted by these large explosions to form pyroclastic flows.     

Aeromagnetic surveys of Kuttyaro and Aso caldera regions,Japan

Detailed total-intensity aeromagnetic surveys of the Kuttyaro and Aso caldera regions, eastern Hokkaido and central Kyushu, were made during early 1964 under the auspices of the U.S.-Japan Co-operative Science Program in conjunction with a project for geophysical studies of calderas in Japan. Each caldera has a maximum diameter of about 22 km; the flights cover a 60 × 60 km rectangular area in each region. The Kuttyaro survey also encompasses the older caldera Akan, south-west of Kuttyaro, and the younger caldera Mashu to the east. All three lie within the Chīshīma (Kurile) volcanic zone. The isomagnetic contour map shows this zone as a belt of short wave-length anomaies which trends east-northeast across the region. Broad wavelength anomalies with trends intersecting the Chīshīma belt at an acute angle probably reflect structural relief on the Neogene volcanic basement concealed beneath Kuttyaro pyroclastic flows. The centre of Kuttyaro caldera coincides with the sharp southern termination of a strong basement high, whereas caldera faults and post-caldera domes have little magnetic expression. Mashu caldera is marked by a minimum in the position of the caldera lake; a symmetrical positive anomaly centering southeast of the caldera suggests either a buried older volcanic edifice or an intrusion. Akan caldera is represented by a magnetic depression encompassing a positive anomaly produced by its central post-caldera cone. The depression extends north of the geologically-deduced boundary of the caldera and may include an earlier collapse structure. Several volcanoes and lava sequences in the region produce negative anomalies due to inverse polarization. The most significant feature of the Aso isomagnetic map is a large, elongate positive anomaly that occupies the southern half of the caldera and extends about one caldera diameter to the south-west along the trend of the Median Tectonic Line of south-west Japan. Whether the anomaly represents the pre-Tertiary basement complex or a younger intrusion perhaps associated with Aso eruptive activity is uncertain. However, the causative body is abruptly truncated within the caldera by a major east-south-east structure passing through the eastern rim and coincident with the approximate locus of resurgent central vent eruptions. The structure may be a fault system that provided egress for the Aso pyroclastic flows. Superimposed on the basement anomaly are the effects of the topography of the caldera, the superficial caldera structure, and the post-caldera cones. An area of intense solfataric activity in the Kuju group of young volcanoes north of Aso has a pronounced negative anomaly. These two surveys illustrate the utility of the magnetic method for investigations of basement structure in caldera regions. They have served as a guide in interpreting reconnaissance aeromagnetic profiles flown concurrently for this project across some 14 other calderas or caldera-like structures in the Japanese islands.     

Reconciling pyroclastic flow and surge: the multiphase physics of pyroclastic density currents

Two end-member types of pyroclastic density current are commonly recognized: pyroclastic surges are dilute currents in which particles are carried in turbulent suspension and pyroclastic flows are highly concentrated flows. We provide scaling relations that unify these end-members and derive a segregation mechanism into basal concentrated flow and overriding dilute cloud based on the Stokes number (S_T), the stability factor (Σ_T) and the dense-dilute condition (D_D). We recognize five types of particle behaviors within a fluid eddy as a function of S_T and Σ_T: (1) particles sediment from the eddy, (2) particles are preferentially settled out during the downward motion of the eddy, but can be carried during its upward motion, (3) particles concentrate on the periphery of the eddy, (4) particles settling can be delayed or ‘fast-tracked’ as a function of the eddy spatial distribution, and (5) particles remain homogeneously distributed within the eddy. We extend these concepts to a fully turbulent flow by using a prototype of kinetic energy distribution within a full eddy spectrum and demonstrate that the presence of different particle sizes leads to the density stratification of the current. This stratification may favor particle interactions in the basal part of the flow and D_D determines whether the flow is dense or dilute. Using only intrinsic characteristics of the current, our model explains the discontinuous features between pyroclastic flows and surges while conserving the concept of a continuous spectrum of density currents.     

Downstream composition changes of acidic volcanic waters discharged into the Banyupahit stream, Ijen caldera, Indonesia

The crater lake of Kawah Ijen volcano contains extremely low pH (<0.4) waters with high SO₄ (70000 mg/kg), Cl (21000 mg/kg), F (1500 mg/kg), Al (5000 mg/kg), Fe (2000 mg/kg) and trace metal (Cu 0.5, Zn 4, Pb 3 mg/kg) contents. These brines seep outward through the western crater rim and reappear on the other side as streamlets, which form the headwaters of the Banyupahit stream. The Banyupahit first mixes with fresh rivers and thermal springs in the Ijen caldera and then irrigates a coastal agricultural plain which is 30 km from the summit crater.We discuss the downstream composition changes affecting the Banyupahit waters by using stable isotope, chemical and mineralogical data collected from sites along the stream length. The saturation of the stream waters with respect to minerals was evaluated with SOLVEQ and WATEQ4F and compared with the geochemical observations. An aluminous mineralogy (alunogen, pickeringite, tamarugite and kalinite) develops in the upper part of the Banyupahit due to concentration of the headwaters by evaporation. Downstream attenuation of dissolved element concentrations results principally from dilution and from mineral precipitation. The stream pH changes from 0 at the source to >4 close to the mouth. The δD and δ¹⁸O values and the relative SO₄–Cl–F contents of the Banyupahit waters indicate that the tributaries are mostly meteoric. Dissolved SO₄ in the acidic stream come only from the crater lake seepages and are not involved later in microbially mediated reactions, as shown by their δ³⁴S and δ¹⁸O values. Re-equilibration of the stream SO₄ oxygen-isotope composition with H₂O from tributaries does not occur.Calcium, SiO₂, Al, Fe, K and SO₄ behave non-conservatively in the stream waters. Gypsum, silica (amorphous or poorly ordered), a basic aluminum hydroxysulfate (basaluminite?), K-jarosite and amorphous ferric hydroxide may exert a solubility control on these elements along the entire stream length, or in certain stream sections, consistent with the thermochemical model results. Downstream concentration trends and mineral saturation levels suggest that precipitation of Sr-, Pb-rich barite and celestite consume Ba, Sr and Pb, whereas dissolved Cu, Pb and Zn may adsorb onto solid particles, especially after the junctions of the acidic stream with non-acidic rivers. We calculated that significant fluxes of SO₄, F, Cl, Al, SiO₂, Ti, Mn and Cu may reach the irrigation system, possibly causing serious environmental impacts such as soil acidification and induration.     

Geology of a submarine volcanic caldera in the Tonga Arc: Dive results

A submersible dive conducted on Volcano #1 located near 21° 09′S–175° 45′W on the Tonga Arc showed that the volcanic edifice with a caldera floor area of 30 km² located at and 450 m deep (b.s.l.=below sea level) was constructed recently during episodic volcanism. The sequential volcanic events are recorded along a faulted terrain formed in response to the collapse of the caldera wall. The post-caldera events are marked by occasional eruptions that have built scoriaceous cones associated with low-temperature hydrothermal venting and localized small-scale collapse features. The stratigraphy of the caldera wall indicates that the volcano was built by explosive volcanism alternating with quieter eruptive events. The repeated, violent explosive events formed ≤ 20 m thick sequences composed of alternating fine-grained ash beds and sand- to boulder-sized pyroclastic layers. During quieter volcanic events, dykes and massive flows intruded and/or accompanied the eruption of the volcaniclastic deposits throughout the sections of the wall explored. Massive columnar-jointed flows consist of viscous, silica-rich lavas forming tabular and giant radial-jointed (GRJ) flows formed in large (> 8 m in diameter) conduits and extruded onto the sea floor. In addition, massive lava flows forming sill-like complexes were observed underneath and near the giant radial-jointed columnar flows. Also, an intermittent quiet type of eruption produced vesicular lava flows, which are interbedded within the pyroclastic layered deposits. The massive and vesicular lavas consist of andesites and dacites with Ca-depleted (pigeonite) and Ca-enriched (salite) pyroxene, and intermediate (andesine-labradorite) to calcic (bytownite) plagioclase. They are depleted in total alkalis (Na₂O + K₂O < 3%), K₂O (< 1%), Zr/Y (< 1.8), Nb/Zr (< 0.01) and light Rare Earth Elements. We interpret that these andesite–dacite series were erupted after undergoing crystal-liquid fractionation in a magma chamber located underneath the caldera floor.     

Monitoring unrest in a large silicic caldera,the long Valley-inyo craters volcanic complex in east-central California

Recent patterns of geologic unrest in long Valley caldera in east-central California emphasize that this large, silicic volcanic system and the adjacent, geologically youthful Inyo-Mono Craters volcanic chain are still active and capable of producing locally hazardous volcanic eruptions. A series of four magnitude -6 earthquakes in May 1980 called attention to this current episode of unrest, and subsequent activity has included numerous earthquake swarms in the south moat of the caldera accompanied by inflation of the resurgent dome by more than 50 cm over the last five years. The seismicity associated with this unrest is currently monitored by a network of 31 telemetered seismic stations with an automatic processing system that yelds hypocentral locations and earthquake magnitudes in near-real time. Deformation of the ground is monitored by a) a series of overlapping trilateration networks that provide coverage ranging from annual measurements of regional deformation to daily measurements of deformation local to the active, southern section of the caldera, b) a regional network of level lines surveyed annually, c) a regional network of precise gravity stations occupied annually, d) local, L-shaped level figures surveyed every few months, and e) a network of fourteen borehole tiltmeter clusters (two instruments in each cluster) and a borehole dilatometer, the telemetered signals from which provide continuous data on deformation rates. Additional telemetered data provide continuous information on fluctuations in the local magnetic field, hydrogen gas emission rates at three sites, and water level and temperatures in three wells. Continuous data on disharge rates and temperatures from hot springs and fumaroles are collected by several on-site recorders within the caldera, and samples for liquid and gas chemistry are collected several times per year from selected hot springs and fumaroles.