Experimental Study on Allowable Berthing and Mooring Conditions of An Oil Tanker

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎａｔａｎｋｅｒｉｓｂｅｒｔｈｅｄｏｒｍｏｏｒｅｄｔｏａｎｏｃｅａｎｐｌａｔｆｏｒｍ ,ｗｈｉｃｈｉｓｕｓｕａｌｌｙｉｎｏｐｅｎｓｅａｓ,ｔｈｅｔａｎｋｅｒｗｉｌｌｓｕｆｆｅｒｆｏｒｃｅｓｇｅｎｅｒａｔｅｄｂｙｗａｖｅｓ ,ｗｉｎｄａｎｄｃｕｒｒｅｎｔ.Ｉｎｍｏｓｔｏｆｔｈｅｐｒｅｖｉｏｕｓｓｔｕｄｉｅｓ ,ｔｈｅｉｎ ｆｌｕｅｎｃｅｏｆｃｕｒｒｅｎｔｏｒｔｈｅｃｏｍｂｉｎｅｄｗａｖｅａｎｄｃｕｒｒｅｎｔｗａｓｃｏｎｓｉｄｅｒｅｄｔｏｂｅｔｈｅｍａｉｎｏｂｊｅｃｔ.Ｉｎｓ…     

防风单点系泊系统系泊力试验研究

通过物理模型试验,得到了3种船型在不同工况组合下的偏荡幅度、偏荡周期以及系泊力实测数据。试验得出了船舶在台风与波、浪、流共同作用下,单点系泊力的主要影响因素为风速、流速、波浪、船舶种类、水线上下侧投影面积比和系泊系统的刚性。选出了本文理论意义明确合理的适合单点系泊系统使用的防风系泊力表达形式,即奎因公式。采用系泊力试验数据在奎因公式的基础上导出的防风系泊系统系泊力计算公式,并给出了公式中的重要参数表达式。     

Design Curves for Mooring Lines of Turret Mooring Systems

This paper presents a series of design curves to aid in the selection of turret mooring systemsfor tankers based Floating Production Storage and Offloading(FPSO)systems.These curves are appropri-ate to water depths ranging from 100m to 600m.The curves can be used as a preliminary design tool,al-lowing the designer to quickly evaluate alternative mooring system configurations,including the numberof mooring lines,the characteristics of chain and wire rope to be deployed and the initial tension.With aknowledge of the total environmental force and vessel motion characteristics,the designer can determinethe appropriate system for closer evaluation.     

东营港扩建工程码头船舶靠离泊数值模拟研究

通过对东营港扩建工程码头2种设计代表船型的进出港和靠离泊操纵数值模拟,分析风、浪、流等环境条件对船舶操纵的影响,论证船舶进出港和靠离泊的安全性,验证水域布置的合理性,为工程建设、船舶操纵和港航管理提供科学依据。     

新型深海系泊系统及数值分析技术

随着海洋油气资源开发逐渐向深海转移,传统的悬链式系泊系统在技术和经济上遇到难以逾越的障碍。作为一种新型的适用于深水和超深水环境的系泊系统,绷紧索系泊系统面临广阔的应用前景。文章对这种新型系泊系统的发展情况进行了介绍,基于有限元数值分析技术,对系泊系统的两个关键特性,即系缆的绷紧-松弛特性以及纤维系缆的动刚度特性进行了分析和处理,通过算例考察了深海平台运动引起的系缆力响应。     

Study of Disconnectable Riser Turret Mooring System Applied in the South China Sea

- The present research has been made on the Disconnectable Riser Turret Mooring (DRTM) System which could be used in the oil fields of the South China Sea. The selection of the principal dimensions and their effect on the characteristics of the system have been discussed. By means of a computer program, the synthetical appraisement has been made in the ultimate mooring condition, disconnecting condition and reconnecting condition respectively. Mean-while, a comparison has been made between DRTM system and CALM system. It has been indicated that DRTM is suitable for the South China Sea and has technological and economical preponderance.     

Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform

In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions.     

多点锚泊系统吸引子和吸引域的计算

针对单自由度多点锚泊系统的纵荡运动模型,研究系统在浪和流作用下的多吸引子和吸引域。以布锚参数,来流和波浪尺度为变参数,运用数值积分和胞映射分析相结合的方法,求得系统的多种形式的振动解,与前人采用完全数值积分方法相比,结果一致。认为在实际中只需研究解的定范围渐近稳定性。文中采用胞映射法,计算了多种振动解的定范围吸引域,以及混沌吸引子的吸引域。并由此分析了吸引子的渐近稳定特性和对初值的敏感性     

海底地磁日变观测站的设计与应用

采用布设海底地磁日变观测锚系的技术方法,可解决远海区磁测日变改正观测资料问题。重点介绍设立海底地磁日变观测锚系中观测设备的技术特性、锚系设计及这一技术方法在国内的首次应用情况。     

Theoretical Model and Dynamic Analysis of Soft Yoke Mooring System

As a popular solution for mooring an FPSO （Floating Production, Storage and Offloading） permanently in shallow water, the soft yoke mooring system has been widely used in ocean oil production activities in the Bohai Bay of China. In order to simulate the interaction mechanism and conduct dynamic analysis of the soft yoke mooring system, a theoretical model with basic dynamic equations is established. A numerical iteration algorithm based on error estimation is developed to solve the equations and calculate the dynanfic response of the mooring system due to FPSO motions. Validation is conducted by wave basin experimentation. It is shown that the numerical simulation takes only a few iteration times and the final errors are small. Furthermore, the calculated results of both the static and dynamic responses agree well with those ones obtained by the model test. It indicates that the efficiency, the precision, the reliability and the validity of the developed numerical algorithm and program are rather good. It is proposed to develop a real-time monitoring system to further monitor the dynamic performance of the FPSO with a soft yoke mooring system under various real sea environments.     

Test Study on Current Force on Mooring Ships

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.     

基于STAR-CCM+的浮标锚泊系统数值研究

浮标锚链因磨损而断裂会导致浮标丢失,所以针对浮标锚泊系统的研究对锚链设计具有重要意义。为解决锚链系泊力计算方法精度不足和锚链力学简化模型与锚链实际形态不一致的问题,通过VOF （Volume of Fluid） 界面捕捉法建立了三维风、浪耦合流场,基于流体力学计算软件STAR-CCM+对一种滚塑浮标及锚链进行数值仿真计算。在建立双链节锚链物理模型基础上,通过求解浮标在风、浪中的受力及浮标与锚链连接处的受力损失求取锚链系泊力。结果显示,风浪越大,锚链的系泊力损失越大,2、3、4 级海况下浮标阻力损失分别为17.1%、36.6%、55.8%。锚链的双链节受力并非均等,主受力链节在2、3 级海况时承担90%以上的锚链系泊力,次受力链节的系泊力随着总系泊力的增加而增加,可见双链节锚链规格应与单链节相同。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

浅海环境观测专用浮标和潜标锚泊系统的研究

文中着重介绍为改进浅海环境观测专用浮标和潜标锚泊系统所做的三件工作。一是提高水面标志浮标的抗台风、抗倾覆和抗沉能力以及连接件的流线型化;二是通过理论计算和水池试验,选用抗风能力强的配套的浮标／潜标系统系列;三是应用设计新型的打捞钩,及时而方便地将丢失在海底的仪器等打捞回来。     

Investigation of Performance of Turret Assembly in Inboard Turret Mooring System

To fulfil the need of development of offshore oil floating production system, the performance of turret assembly in an inboard turret mooring system has been investigated in the paper. By means of systematic evaluation, the optimal structure of the turret for single-point mooring systems has been determined. Through model tests of a turret mooring system, several groups of data such as forces, moments and displacements under different environmental conditions have been obtained. Stresses and strains of the turret structure have been calculated by means of the finite element method corresponding to the situation in the model experiment. The study shows that the selected turret structure and the designed turret assembly are technically feasible.     

深海抗风浪网箱锚泊系统的设计

通过对网箱框架、网衣在风、浪、流作用下的受力分析 ,建立网箱锚泊系统缆绳受力计算的数学模型。以国家十五“86 3”计划课题—“深海抗风浪网箱的研制”所设计的网箱为例 ,选定山东荣成市寻山海域 1 0年一遇的灾害海况为设计计算条件 ,根据 Morison公式 ,采用 Goodman- L ance方法求得单个网箱的锚泊力为 6 5 .6 7k N。在此基础上对网箱的锚泊系统进行设计 ,确定了锚泊系统每只锚重 2 5 0 kg,锚链重为 1 5 0 kg,缆绳长度为 33m。     

深海系泊法向承力锚模型实验系统

法向承力锚是一种新型的拖曳嵌入式系泊基础.这种锚的工程应用仅有10 a时间.国内在此项技术上尚属空白.通过实验系统的设计,介绍了针对这种新型拖曳锚展开模型实验研究的实验平台.利用一些新型传感器和巧妙的机件设计,不仅实现了实验量测方法的创新,而且达到了经济实用的目的.实验结果也验证了整个系统设计的可靠性.     

日照港30万吨油码头船舶泊稳物理模型试验研究

日照港拟在岚北港区建设30万吨级原油码头,通过实验测定了船舶在风、浪、流作用下对码头结构的作用力、船舶运动量最大值、最大缆绳拉力、船舶对护舷撞击能量和撞击力,为工程结构设计和操船规程的制定提供可靠依据。     

Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design

A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design.