黔西纳雍煤系地层中潮汐沙脊的发现

发现并分析了黔西纳雍县生拱地区龙潭组中段一个潮汐沙脊的沉积层序。研究了组成潮汐沙脊砂岩的沉积构造和岩石学特征，并通过主砂体图再现了潮汐沙脊的平面展布。     

Evolution and stratigraphy of a regressive barrier/backbarrier complex: Kiawah Island, South Carolina

Analysis of 75 vibracores from the backbarrier region of Kiawah Island, South Carolina reveals a complex association of three distinct stratigraphic sequences. Beach ridge progradation and orientation-controlled backbarrier development during the evolution of Kiawah Island, and resulted in deposition of: (1) a mud-rich central backbarrier sequence consisting of low marsh overlying fine-grained, tidal flat/lagoonal mud; (2) a sandy beach-ridge swale sequence consisting of high and low marsh overlying tidal creek channel and point bar sand, and foreshore/shoreface; and (3) a regressive sequence of sandy, mixed, and muddy tidal flats capped by salt marsh that occurs on the updrift end of the island. Central backbarrier deposits formed as a result of the development of the initial beach ridge on Kiawah Island. Formation of this beach ridge created a backbarrier lagoon in which fine-grained estuarine and tidal flat mud accumulated. Washovers, oyster mounds, and tidal creek deposits form isolated sand and/or shell-rich lenses in the lagoon. Spartina alterniflora low marsh prograded into the lagoon as the tidal flats aggraded. Barrier progradation and sediment bar-bypassing at Stono Inlet created digitate beach ridges on the northeast end of Kiawah Island. Within the beach-ridge swales, tidal flats were disconformably deposited on shoreface and foreshore sand of the older beach ridges. Tidal creek drainage systems evolved to drain the swales. These rapidly migrating creeks reworked the tidal flat, foreshore, and shoreface sediments while redepositing a fining-upward sequence of channel lag and point bar deposits, which served as a substrate for salt marsh colonization. This resultant regressive sedimentary package marks the culmination of barrier island development and estuary infilling. Given enough time and sedimentation, the backbarrier sequence will ultimately prograde over the barrier island, reworking dune, beach, and foreshore sediments to form the upper sand-rich bounding surface of the barrier lithosome. Preservation of the regressive sequence is dependent upon sediment supply and the relative rate of sea-level rise, but the reworking of barrier islands by tidal inlets and migrating tidal creeks greatly alter and complicate the stratigraphic sequence.     

珠江口盆地惠州凹陷新近系珠江组K22陆架砂脊沉积成因分析*

通过分析珠江口盆地惠州凹陷新近系珠江组NE—SW向平行于古岸线展布的K22条带状砂体外部地震反射特征、内部反射结构及平面展布规律,并运用层序地层学方法和理论,结合海平面变化特点,对K22条带状砂脊沉积成因进行了研究。结果显示:K22条带状砂脊为发育在陆架区古构造高带、受控于强制性海退过程的再沉积产物,其物源来自于早期的三角洲,沉积水动力条件多样,主要为海退过程中的潮汐流和波浪作用;同时,沿岸流也对砂脊形态的形成起到了关键作用,这些砂脊后期得益于快速的海侵而保留下来。留存下来的沙脊沉积被包裹在海相泥岩背景中,可形成良好的岩性圈闭。     

Salt tectonics in pull-apart basins with application to the Dead Sea Basin

The Dead Sea Basin displays a broad range of salt-related structures that developed in a sinistral strike-slip tectonic environment: en échelon salt ridges, large salt diapirs, transverse oblique normal faults, salt walls and rollovers. Laboratory experiments are used to investigate the mechanics of salt tectonics in pull-apart systems. The results show that in an elongated pull-apart basin the basin fill, although decoupled from the underlying basement by a salt layer, remains frictionally coupled to the boundary. The basin fill, therefore, undergoes a strike-slip shear couple that simultaneously generates en échelon fold trains and oblique normal faults, trending mutually perpendicular. According to the orientation of basin boundaries, sedimentary cover deformation can be dominantly contractional or extensional, at the extremities of pull-apart basins forming either folds and thrusts or normal faults, respectively. These guidelines, applied to the analysis of the Dead Sea Basin, show that the various salt-related structures form a coherent set in the frame of a sinistral strike-slip shearing deformation of the sedimentary basin fill.     

Palaeokarst, tidal erosion surfaces and stromatolites in the Silurian Eke Formation of Gotland, Sweden

Irregular, scalloped erosion surfaces in the shelf carbonate sequences of the lower Eke Formation (Ludlow Series, upper Silurian) in the east of Gotland, Sweden, comprise series of shallow hollows separated by sharp-crested ridges, and cavities with sculptured, undercut walls, cut into lithified sediment. These represent analogues of the solution basins formed in modern coastal and subaerial karst terrains. Discrete erosional cavities merge on enlargement by breaching of the intervening walls to leave remnant, tapering ridges. Sets of the ridges and basins seen in surface view show an average width of basins of 1–2 m, with relief of 40–50 cm and pronounced N-S axes for the ridges; this alignment may reflect the local drainage direction. The lowermost erosion surface passes laterally into a planar, mineralized horizon at the top of the underlying Hemse Group that was resistant to and forms the base level of erosion. Because of restricted exposure of higher Eke Formation sediments the upper limit of erosion remains unknown. There is no evidence of caliche or subaerial diagenetic textures, but solution vugs are common in the eroded limestones. Marine hard-bottom biota attached to some surfaces, and transition from scalloped to planar surfaces indicate erosion in tidal zones, but subaerial karstic erosion is also inferred. The resubmerged karst-eroded topography is overlain by shallow marine carbonates, including small organic buildups. Finely-layered stromatolitic mats developed over the initial infill, in subtidal environments, and grew to form domed mounds within the erosional cavities. They abut sharply against bounding side walls and overhangs. Some emergence is evident from desiccation features in the upper parts of mounds. Biostratigraphical evidence dating the events from initial uplift and karstic erosion to covering of the drowned relief topography places the whole sequence within upper Ludlow times.     

A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping     

Sand beach ridges record 6000 year history of extreme tropical cyclone activity in northeastern Australia

Sand beach ridges are considered to be derived either from aeolian processes and/or waves but their deposition by individual or multiple storms has not been investigated in any detail. We use numerical meteorological and oceanographic models to determine the origin of a sequence of 29 shore parallel sand beach ridges in northeastern Australia. The results suggest that the ridges were constructed by waves and that the final form or height of the ridges is a function of high-energy tropical cyclone generated waves plus storm tides. Hence these landforms archive a nearly 6000 year long history of intense tropical cyclones. The record implies that these extreme tempests occur considerably more frequently than that suggested by the short historical record for this region. The genesis of this sand beach ridge plain has implications for the interpretation of similar sequences elsewhere along the northeast coast of Australia and in comparable environments globally. If other similar sand beach ridge plains have also been deposited by like processes it stands to reason that these long-term records of high intensity tropical cyclones can be used to ascertain a regional scale risk assessment from this hazard.     

Minor end moraines of the Wisconsin Valley Lobe, north-central Wisconsin, USA

Approximately 35 parallel, discontinuous glacial ridges occur in an area of about 100 km² in north‐central Wisconsin. The ridges are located between about 6 and 15 km north (formerly up‐ice) of the maximum extent of the Wisconsin Valley Lobe of the Laurentide Ice Sheet. The ridges are between 1 and 4 m high, up to 1 km long, and spaced between 30 and 80 m apart. They are typically asymmetrical with a steep proximal (ice‐contact) slope and gentle distal slope. The ridges are composed primarily of subglacial till on their proximal sides and glacial debris‐flow sediment on the distal sides. In some ridges the till and debris‐flow sediment are underlain by sorted sediment that was deformed in the former direction of ice flow. We interpret the ridges to be recessional moraines that formed as the Wisconsin Valley Lobe wasted back from its maximum extent, with each ridge having formed by a sequence of (1) pushing of sorted ice‐marginal sediment, (2) partial overriding by the glacier and deposition of subglacial till on the proximal side of the ridge, and (3) deposition of debris‐flow sediment on the distal side of the ridge after the frozen till at the crest of the ridge melted. The moraines are similar to annual recessional moraines described at several modern glaciers, especially the northern margin of Myrdalsjokull, Iceland. Thus, we believe the ridges probably formed as a result of minor winter advances of the ice margin during deglaciation. Based on this assumption, we calculate the net rate of ice‐surface lowering of the Wisconsin Valley Lobe during the period when the moraines formed. Various estimates of ice‐surface slope and rates of ice‐margin retreat yield a wide range of values for ice‐surface lowering (1.7–14.5 m/yr). Given that ablation rates must exceed those of ice‐surface lowering, this range of values suggests relatively high summer temperatures along the margin of the Wisconsin Valley Lobe when it began retreating from its maximum extent. In addition, the formation of annual moraines indicates that the glacier toe was thin, the ice surface was clean, and the ice margin experienced relatively cold winters.     

MIS 3晚期以来江苏中部海岸的层序地层

通过对苏北岸外西洋潮流通道内钻孔和地震剖面的地层沉积学、年代地层学、地震地层学和层序地层学等多学科再研究,以及区域钻孔再对比,本文确定该海域约从35kaBP(14C惯用年龄)开始经历了滨岸砂坝、淡水湖沼、河流泛滥平原、滨岸沼泽、潮流沙脊和潮流通道一系列的环境演变,主要受控于MIS3晚期以来的海平面旋回以及古河流入海沉积物供给,而构造沉降是相对次要的,由此形成了五级层序地层中的末次冰期晚间冰阶准层序和冰后期准层序,以及前者的高水位体系域和强制海退楔体系域、后者的海侵体系域和高水位体系域。海域中潮流沙脊可能开始发育于冰后期海侵淹没本区(约9calkaBP)之后,但一直只是水下暗沙且处在不断调整之中,直到1128～1855AD间黄河夺淮从苏北入黄海,大量泥沙充填潮道,部分水下暗沙出露海面成为明沙。西洋潮流通道并非是晚全新世期间通过沙脊的蚀低而形成,而在全新世高海面前后就已具雏形并持续至1128AD,1128～1855AD和1855AD至今分别经历了充填淤浅与冲刷成型的过程,且今后具有进一步展宽刷深的趋势。     

洋脊地质学与成矿学

洋脊分活动型和稳定型两种,柱状地质剖面由未固结沉积物和上、下洋壳三部分构成,横向断裂带发育。岩石蚀变、变质普遍,可与大陆拉斑玄武岩对比。洋脊正在进行两种成矿过程。近20年在洋脊发现的矿床(化)可分为11个类型,其中有的具有工业意义。洋脊研究的深入,将进一步揭示洋壳的奥秘,还将提高对陆壳以及整个地球历史演化进程中的沉积、岩浆、变质、成矿、成岩和构造等作用以及这些作用之间相互促进和制约关系的认识。     

Problems of moraine morphology: Rogen moraine and Blattnick moraine

In Västerbotten County, Sweden, both Rogen moraine and Blattnick moraine are common in the inner part of the county. Rogen moraines are found primarily in basins and upslope positions, whereas the Blattnick type (first found in the Blattnicksele area in the county) mostly occurs in broader, more plain-like areas. Moreover, both types show a great variety of individual forms, due to topography, basal conditions and ice tectonics. Most Rogen moraine ridges are characterized by features due to active ice. The Blattnick moraine type is characterized by broader and more drumlinized ridges. They are often proximally higher and laterally-distally extended, thus merging into streamlined mounds or hills. The material composition of Rogen and Blattnick moraines is similar. The authors have found the following sequence of transitional forms from the Scandinavian mountains in the west towards the east: (1) Rogen moraines, (2) crescent ridges, (3) Blattnick moraines, (4) drumlins.     

Coarse‐sand beach ridges at Cowley Beach,north‐eastern Australia: Their formative processes and potential as records of tropical cyclone history

Storm surges generated by tropical cyclones have been considered a primary process for building coarse‐sand beach ridges along the north‐eastern Queensland coast, Australia. This interpretation has led to the development of palaeotempestology based on the beach ridges. To better identify the sedimentary processes responsible for these ridges, a high‐resolution chronostratigraphic analysis of a series of ridges was carried out at Cowley Beach, Queensland, a meso‐tidal beach system with a >3 m tide range. Optically stimulated luminescence ages indicate that 10 ridges accreted seaward over the last 2500 to 2700 years. The ridge crests sit +3·5 to 5·1 m above Australian Height Datum (ca mean sea‐level). A ground‐penetrating radar profile shows two distinct radar facies, both of which are dissected by truncation surfaces. Hummocky structures in the upper facies indicate that the nucleus of the beach ridge forms as a berm at +2·5 m Australian Height Datum, equivalent to the fair‐weather swash limit during high tide. The lower facies comprises a sequence of seaward‐dipping reflections. Beach progradation thus occurs via fair‐weather‐wave accretion of sand, with erosion by storm waves resulting in a sporadic sedimentary record. The ridge deposits above the fair‐weather swash limit are primarily composed of coarse and medium sands with pumice gravels and are largely emplaced during surge events. Inundation of the ridges is more likely to occur in relation to a cyclone passing during high tide. The ridges may also include an aeolian component as cyclonic winds can transport beach sand inland, especially during low tide, and some layers above +2·5 m Australian Height Datum are finer than aeolian ripples found on the backshore. Coarse‐sand ridges at Cowley Beach are thus products of fair‐weather swash and cyclone inundation modulated by tides. Knowledge of this composite depositional process can better inform the development of robust palaeoenvironmental reconstructions from the ridges.     

Seismic stratigraphy, buried beach ridges and contourite drifts: the Late Quaternary history of the closed Lago Cardiel basin, Argentina (49°S)

The results of a seismic stratigraphic analysis of a closed lake basin, Lago Cardiel, in southernmost South America are reported. Very few high-resolution, continental records spanning the Late Quaternary have been obtained from this region. Seismic sequence stratigraphic analysis allows a reconstruction of lake level variations. Two major hiatuses of unknown age occurred during the early evolution of the basin with the deposition of an alluvial fan in a restricted area in the intervening time period. Following the development of a relatively shallow lake during the late Pleistocene and a short desiccation pulse around 11 220 ¹⁴C yr BP, a transgression of over 135 m occurred at the beginning of the Holocene. The transgression was associated with the formation of beach ridges preserved in the lake stratigraphy on the floor of the modern Lago Cardiel at four different elevations. The preservation of largely unreworked beach ridges indicates a stepwise rise in the lake level. There is no seismic evidence of a major lowering of the lake below modern level during the entire Holocene. Deposition since the mid-Holocene is marked by strong lateral differences in sediment accumulation with a depocentre slightly to the north of the basin midpoint and a pronounced mounded distribution. Seismic reflection geometries, as well as sedimentological characteristics indicate a lacustrine contourite drift covering an area of 80–100 km². As Lago Cardiel is under the influence of westerly winds, these most likely drove lake circulation. The identification of drowned beach ridges and of contourite drifts illustrates that high-resolution seismic stratigraphy is not only a powerful tool in reconstructing past lake level elevations for closed lake basins, but it can also provide information about the rate of lake level changes and the presence and strength of lake currents.     

Combined tide and wave influence on sedimentation patterns in the Upper Jurassic Swift Formation, south-eastern Alberta

In south‐eastern Alberta, the Oxfordian Swift Formation comprises two unconformity‐bounded sequences. Sequence 1 consists of the shale member. It unconformably overlies Bathonian calcareous shale of the Rierdon Formation and consists dominantly of shale with uncommon hum‐ mocky cross‐stratified siltstone. The shale member comprises up to four parasequences that show a subtle upward‐fining stacking pattern, suggesting overall deepening in a storm‐dominated fully marine basin. Deposition of the shale member was terminated by a fall in relative sea‐level, which in turn initiated sequence 2. During lowstand, a network of north‐east‐ to south‐west‐trending meandering channels incised the top of sequence 1. Despite the preserved morphology of these channels, observations in core suggest that lowstand deposits are absent. These strata were most likely thoroughly reworked by ravinement processes associated with the ensuing transgression and are recorded only by a thin chert pebble lag. Also associated with transgression were significant changes in the physical and ecological conditions in the local Swift basin. These changes were related to modifications in basin configuration and the development of a low‐energy strait, which probably formed as a result of uplift of the Sweetgrass Arch. Within this newly configured basin, brackish‐water conditions prevailed, and sedimentation was dominated by suspension deposition of mud. Bed‐load sediment, composed mostly of very fine and fine sand, made up only a small part of the total sediment flux into the area and was transported principally by low‐energy combined flows with variable‐speed microtidal currents and a low‐energy oscillatory component related to storm waves. Sand was generally deposited in the form of small, discontinuous sand ridges that developed locally throughout the study area – it is these features that form the principal hydrocarbon reservoir bodies in the Swift Formation in the study area. After initiation, ridges built upwards and migrated laterally in response to transport and preferential local deposition of bed‐load sediment. Although common near the unconformity along the top of sequence 1, sand ridges also occur at several higher stratigraphic levels in sequence 2. These latter ridges, however, are not associated with regionally correlatable discontinuities but, instead, were initiated by local bed irregularities, possibly related to breaking internal waves, and were supplied with new sediment transported into the study area. The origin of these sand ridges is therefore not related to changes in relative sea‐level but, instead, to intrabasinal processes in a low‐energy strait.     

Deformation Mechanism of the Underground Excavations at the WIPP Site

Summary The deformational behavior of underground excavations in rock salt is difficult to predict because of the time-dependent properties of rock salt, and its response to many other parameters, which influence its behavior. To investigate the influence of important parameters such as time, temperature, geology, opening geometry, excavation sequence, and effects of the immediate roof layer on underground excavations in rock salt, deformation measurements from the Waste Isolation Pilot Plant (WIPP) were used.     

月岭形成机制及其与潮汐力的相关性分析

月岭作为月表常见的线性构造类型之一,具有一定的分布规律。利用LRO(Lunar Reconnaissance Orbiter)的DEM数据提取月岭剖面并进行了构造分析,认为月岭主体为逆冲断层叠加牵引褶皱的挤压构造形成机制。前人多用月海盆地沉降叠加月球热能收缩解释月岭的成因,但它无法解释盆地中央月岭呈近南北向的优选方位,这种现象可能是受到近东西向区域性挤压应力的影响,与潮汐力对月球中低纬度区域的应力作用状态相符,推测潮汐力可能是盆地中央月岭形成的主因。综合利用嫦娥一号CCD影像数据、Lunar Orbiter和LRO全色波段影像数据,解译识别出月球正面中低纬度1 464条月岭。对其进行方向统计,结果表明,月岭整体走向也与Melosh预测的在潮汐力作用下形成的构造样式相似。由此推测,月岭的展布与潮汐力具有很强的相关性,进一步论证了月岭的形成与潮汐力有关。     

陕北盐盆马家沟组含盐系地层层序发育特征及地质意义

鄂尔多斯盆地中深部含盐系地层是中国陆相盐资源勘探开发的重点。在前人研究的基础上,文章采用Vail经典层序地层学理论,结合构造运动与海平面变化,通过对地震、测井资料的综合分析,应用井震结合技术,对古生界中奥陶统马家沟组地层开展层序地层研究,并进一步探究不同级别层序对含盐系地层发育形成的地质意义。研究结果表明,马家沟组地层划分为1个二级层序,3个三级层序,8个四级层序。二级层序（构造层序）和三级层序（沉积层序）共同影响含盐系地层平面及剖面发育特征。沉积作用（三级层序）控制原始盐体的形成;构造作用（二级层序）控制原始盐盆的形成,并对含盐系地层形态产生破坏、改造及调整。研究含盐系地层层序发育特征及其地质意义,能够为海相盆地中深层盐矿的进一步勘探开发提供方向和依据。     

Roof sequence response to emplacement of the Wills Mountain duplex: the roles of forethrusting and scales of deformation

This paper focuses on the behavior of a roof sequence in the Appalachian Plateau of West Virginia, U.S.A., and emplacement of the Wills Mountain duplex with 17.5 km of displacement. Unlike the Plateau along strike in Pennsylvania and New York where forethrusting was previously documented, this roof sequence lacks an underlying salt-dominated roof décollement. Kinematic analyses reveal that the roof sequence in the West Virginian Plateau accommodated about two-thirds of the 17.5 km of shortening by the adjacent Wills Mountain duplex, as a forethrusting kinematic response. The remaining shortening imbalance of about 5 km between the duplexes and younger roof sequence rocks is accommodated by additional forethrusting further into the foreland and local compensation. This kinematic response matches that along strike in the central Appalachians despite the loss of the salt décollement. We interpret that an Ordovician shale-dominated formation was sufficiently weak to substitute for the salt horizon. Thus, a weak mechanical unit rather than specifically a salt décollement is a necessary prerequisite for forethrusting. A contributing factor to forethrusting may be the subvertical front of the Wills Mountain duplex, which inhibited other responses by the roof sequence. Mesoscale and smaller processes, including grain-to-grain pressure solution, twinning and cleavage formation account for over 75% of the shortening in the roof sequence, and, if ignored, would result in an erroneous interpretation of backthrusting or local compensation. This result suggests that failure to consider all deformation scales could lead to incorrect kinematic conclusions in other tectonic systems.     

Glaciodynamically upthrusted bands of englacially transported debris in the Pleistocene of central Poland

Two kinds of buried structures are described from Dzirżenin, north-east of Warsaw, where they occur within a glaciofluvial landform: (1) narrow till ridges, showing vertically oriented structures, excavated from stratified gravel and sands; and (2) a narrow vertical zone of massive gravelly/sandy material, involving vertically oriented lens-like layers composed of massive sand with pebbles, or of diamicton. The gravelly/sandy zone is also closely surrounded by stratified glaciofluvial sediments. In spite of their vertical position and internal deformation, the till ridges and gravelly/sandy zone show non-tectonic contacts with the surrounding, stratified, undisturbed sediments. The glaciofluvial sediments that occur immediately next to the structures under discussion are characterized by the occurrence of comparatively coarse material and interbeddings of diamicton, which wedge out away from these structures. The gravelly/sandy zone separates different kinds of water-laid deposits. The buried structures are interpreted as former debris-laden bands, thrust upwards within the frontal part of the ice sheet and then transformed into still-frozen debris ridges projecting over the already dead ice. Further melting of the decaying ice resulted in abundant glaciofluvial sedimentation, and the debris ridges also supplied material for the deposition of the neighbouring stratified deposits. One of the ridges separated different glaciofluvial environments. The glaciofluvial sediments completely buried the ice-cemented ridges, which were finally transformed by a melting-out process into the till ridges and the gravelly/sandy zone. The former are interpreted as having been transformed from upturned debris-laden bands with a high concentration of debris or from the bands composed of frozen-up sediment slabs. The gravelly/sandy zone is interpreted as having (most probably) been deposited from upturned bands characterized by a lesser concentration of debris.